David Brownell <david-b@pacbell.net> Make the Hitex STM32-PerformanceStick board...

source the STM32 target config instead of using a private clone

git-svn-id: svn://svn.berlios.de/openocd/trunk@2352 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/tcl/board/hitex_stm32-performancestick.cfg b/tcl/board/hitex_stm32-performancestick.cfg
index 5effbd960b4454705a4eee95f968d80b5c5a13b9..509f98a80b22c440ff90a9f066a2a5170cf3de2e 100644 (file)
--- a/tcl/board/hitex_stm32-performancestick.cfg
+++ b/tcl/board/hitex_stm32-performancestick.cfg
@@ -1,50 +1,9 @@
 # Hitex stm32 performance stick
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME stm32_hitex
-}
-
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
-   set  _ENDIAN little
-}
-
-# set jtag speed
-jtag_khz 500
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-# The CPU
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # See STM Document RM0008
-  # Section 26.6.3
-   set _CPUTAPID 0x3ba00477
-}
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-# The boundery scan register, leave the "expected-id" undefined.
-jtag newtap $_CHIPNAME bs  -irlen 5 -ircapture 0x1 -irmask 0x1 
+set  CHIPNAME stm32_hitex
+source [find target/stm32.cfg]
 
 # configure str750 connected to jtag chain
+# FIXME -- source [find target/str750.cfg] after cleaning that up
 jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0x0f
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
-
-#
-flash bank stm32x 0 0 0 0 0
-
-# For more information about the configuration files, take a look at:
-# openocd.texi