]> git.sur5r.net Git - openocd/commitdiff
arm11: allow minidrivers to implement inner loop of memory writes
authorØyvind Harboe <oyvind.harboe@zylin.com>
Tue, 9 Feb 2010 08:55:56 +0000 (09:55 +0100)
committerØyvind Harboe <oyvind.harboe@zylin.com>
Mon, 22 Feb 2010 09:15:51 +0000 (10:15 +0100)
This allows minidrivers to e.g. hardware accelerate memory
writes.

Same trick as is used for arm7/9 dcc writes.

Added error propagation for memory transfer failures in
code rearrangement.

Also the JTAG end state is not updated until after
the memory write run is complete.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
src/jtag/zy1000/zy1000.c
src/target/arm11_dbgtap.c

index ef4f48217b3a3eb3cfffc6c32deaa1b70f19ac44..da5aa3665edad6d385bf51e495f1c490a9a27f9c 100644 (file)
@@ -845,6 +845,14 @@ void embeddedice_write_dcc(struct jtag_tap *tap, int reg_addr, uint8_t *buffer,
 }
 
 
+int arm11_run_instr_data_to_core_noack_inner_default(struct arm11_common * arm11, uint32_t opcode, uint32_t * data, size_t count);
+
+int arm11_run_instr_data_to_core_noack_inner(struct arm11_common * arm11, uint32_t opcode, uint32_t * data, size_t count)
+{
+       return arm11_run_instr_data_to_core_noack_inner_default(arm11, opcode, data, count);
+}
+
+
 static const struct command_registration zy1000_commands[] = {
        {
                .name = "power",
index 6d132a797a33606741aae28b982d9f7059cbe8ab..b8388c821b63b840e4f5d86d7e13d5532c6d7285 100644 (file)
@@ -569,43 +569,31 @@ static const tap_state_t arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay[] =
        TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
 };
 
-
-
-/** Execute one instruction via ITR repeatedly while
- *  passing data to the core via DTR on each execution.
- *
- * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
- * is set, the ITR Ready flag is set (as seen on the previous entry to
- * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
- *
- *  No Ready check during transmission.
- *
- *  The executed instruction \em must read data from DTR.
- *
- * \pre arm11_run_instr_data_prepare() /  arm11_run_instr_data_finish() block
- *
- * \param arm11                Target state variable.
- * \param opcode       ARM opcode
- * \param data         Pointer to the data words to be passed to the core
- * \param count                Number of data words and instruction repetitions
- *
+/* This inner loop can be implemented by the minidriver, oftentimes in hardware... The
+ * minidriver can call the default implementation as a fallback or implement it
+ * from scratch.
  */
-int arm11_run_instr_data_to_core_noack(struct arm11_common * arm11, uint32_t opcode, uint32_t * data, size_t count)
+int arm11_run_instr_data_to_core_noack_inner_default(struct jtag_tap * tap, uint32_t opcode, uint32_t * data, size_t count)
 {
-       arm11_add_IR(arm11, ARM11_ITRSEL, ARM11_TAP_DEFAULT);
+       struct scan_field       chain5_fields[3];
 
-       arm11_add_debug_INST(arm11, opcode, NULL, TAP_DRPAUSE);
+       chain5_fields[0].tap                    = tap;
+       chain5_fields[0].num_bits               = 32;
+       chain5_fields[0].out_value              = NULL; /*&Data*/
+       chain5_fields[0].in_value               = NULL;
 
-       arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
+       chain5_fields[1].tap                    = tap;
+       chain5_fields[1].num_bits               = 1;
+       chain5_fields[1].out_value              = NULL;
+       chain5_fields[1].in_value               = NULL; /*&Ready*/
 
-       struct scan_field       chain5_fields[3];
-
-       arm11_setup_field(arm11, 32,    NULL/*&Data*/,  NULL,                           chain5_fields + 0);
-       arm11_setup_field(arm11,  1,    NULL,                   NULL /*&Ready*/,        chain5_fields + 1);
-       arm11_setup_field(arm11,  1,    NULL,                   NULL,                           chain5_fields + 2);
+       chain5_fields[2].tap                    = tap;
+       chain5_fields[2].num_bits               = 1;
+       chain5_fields[2].out_value              = NULL;
+       chain5_fields[2].in_value               = NULL;
 
        uint8_t                 *Readies;
-       unsigned readiesNum = count + 1;
+       unsigned readiesNum = count;
        unsigned bytes = sizeof(*Readies)*readiesNum;
 
        Readies = (uint8_t *) malloc(bytes);
@@ -616,31 +604,22 @@ int arm11_run_instr_data_to_core_noack(struct arm11_common * arm11, uint32_t opc
        }
 
        uint8_t *               ReadyPos                        = Readies;
-
        while (count--)
        {
                chain5_fields[0].out_value      = (void *)(data++);
                chain5_fields[1].in_value       = ReadyPos++;
 
-               if (count)
+               if (count > 0)
                {
-                       jtag_add_dr_scan(ARRAY_SIZE(chain5_fields), chain5_fields, jtag_set_end_state(TAP_DRPAUSE));
+                       jtag_add_dr_scan(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
                        jtag_add_pathmove(ARRAY_SIZE(arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay),
                                arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay);
-               }
-               else
+               } else
                {
-                       jtag_add_dr_scan(ARRAY_SIZE(chain5_fields), chain5_fields, jtag_set_end_state(TAP_IDLE));
+                       jtag_add_dr_scan(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_IDLE);
                }
        }
 
-       arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
-
-       chain5_fields[0].out_value      = 0;
-       chain5_fields[1].in_value   = ReadyPos++;
-
-       arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
-
        int retval = jtag_execute_queue();
        if (retval == ERROR_OK)
        {
@@ -655,16 +634,84 @@ int arm11_run_instr_data_to_core_noack(struct arm11_common * arm11, uint32_t opc
                }
 
                if (error_count > 0 )
+               {
                        LOG_ERROR("%u words out of %u not transferred",
                                error_count, readiesNum);
-
+                       retval = ERROR_FAIL;
+               }
        }
-
        free(Readies);
 
        return retval;
 }
 
+int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap * tap, uint32_t opcode, uint32_t * data, size_t count);
+
+#ifndef HAVE_JTAG_MINIDRIVER_H
+int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap * tap, uint32_t opcode, uint32_t * data, size_t count)
+{
+       return arm11_run_instr_data_to_core_noack_inner_default(tap, opcode, data, count);
+}
+#endif
+
+/** Execute one instruction via ITR repeatedly while
+ *  passing data to the core via DTR on each execution.
+ *
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
+ *
+ *  No Ready check during transmission.
+ *
+ *  The executed instruction \em must read data from DTR.
+ *
+ * \pre arm11_run_instr_data_prepare() /  arm11_run_instr_data_finish() block
+ *
+ * \param arm11                Target state variable.
+ * \param opcode       ARM opcode
+ * \param data         Pointer to the data words to be passed to the core
+ * \param count                Number of data words and instruction repetitions
+ *
+ */
+int arm11_run_instr_data_to_core_noack(struct arm11_common * arm11, uint32_t opcode, uint32_t * data, size_t count)
+{
+       arm11_add_IR(arm11, ARM11_ITRSEL, ARM11_TAP_DEFAULT);
+
+       arm11_add_debug_INST(arm11, opcode, NULL, TAP_DRPAUSE);
+
+       arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
+
+       int retval = arm11_run_instr_data_to_core_noack_inner(arm11->arm.target->tap, opcode, data, count);
+
+       if (retval != ERROR_FAIL)
+               return retval;
+
+       arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
+
+       struct scan_field       chain5_fields[3];
+
+       arm11_setup_field(arm11, 32,    NULL/*&Data*/,  NULL,                           chain5_fields + 0);
+       arm11_setup_field(arm11,  1,    NULL,                   NULL /*&Ready*/,        chain5_fields + 1);
+       arm11_setup_field(arm11,  1,    NULL,                   NULL,                           chain5_fields + 2);
+
+       uint8_t ready_flag;
+       chain5_fields[1].in_value   = &ready_flag;
+
+       arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
+
+       retval = jtag_execute_queue();
+       if (retval == ERROR_OK)
+       {
+               if (ready_flag != 1)
+               {
+                       LOG_ERROR("last word not transferred");
+                       retval = ERROR_FAIL;
+               }
+       }
+
+       return retval;
+}
+
 
 /** Execute an instruction via ITR while handing data into the core via DTR.
  *