fi
fi
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1738: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1753 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1759: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 1770 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1776: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
echo $ac_n "checking for AIX""... $ac_c" 1>&6
-echo "configure:1739: checking for AIX" >&5
+echo "configure:1800: checking for AIX" >&5
cat > conftest.$ac_ext <<EOF
-#line 1741 "configure"
+#line 1802 "configure"
#include "confdefs.h"
#ifdef _AIX
yes
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:1763: checking for POSIXized ISC" >&5
+echo "configure:1824: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6
-echo "configure:1785: checking for minix/config.h" >&5
+echo "configure:1846: checking for minix/config.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1790 "configure"
+#line 1851 "configure"
#include "confdefs.h"
#include <minix/config.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1795: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1856: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:1836: checking for socket" >&5
+echo "configure:1897: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1841 "configure"
+#line 1902 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:1864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
-echo "configure:1883: checking for main in -lsocket" >&5
+echo "configure:1944: checking for main in -lsocket" >&5
ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1891 "configure"
+#line 1952 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lnet""... $ac_c" 1>&6
-echo "configure:1926: checking for main in -lnet" >&5
+echo "configure:1987: checking for main in -lnet" >&5
ac_lib_var=`echo net'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1934 "configure"
+#line 1995 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lnsl_s""... $ac_c" 1>&6
-echo "configure:1969: checking for main in -lnsl_s" >&5
+echo "configure:2030: checking for main in -lnsl_s" >&5
ac_lib_var=`echo nsl_s'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl_s $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1977 "configure"
+#line 2038 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2045: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
-echo "configure:2012: checking for main in -lnsl" >&5
+echo "configure:2073: checking for main in -lnsl" >&5
ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2020 "configure"
+#line 2081 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2088: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for socket in -linet""... $ac_c" 1>&6
-echo "configure:2055: checking for socket in -linet" >&5
+echo "configure:2116: checking for socket in -linet" >&5
ac_lib_var=`echo inet'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-linet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2063 "configure"
+#line 2124 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:2074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lgen""... $ac_c" 1>&6
-echo "configure:2102: checking for main in -lgen" >&5
+echo "configure:2163: checking for main in -lgen" >&5
ac_lib_var=`echo gen'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgen $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2110 "configure"
+#line 2171 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2117: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for sigset in -lV3""... $ac_c" 1>&6
-echo "configure:2149: checking for sigset in -lV3" >&5
+echo "configure:2210: checking for sigset in -lV3" >&5
ac_lib_var=`echo V3'_'sigset | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lV3 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2157 "configure"
+#line 2218 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sigset()
; return 0; }
EOF
-if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2229: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2201: checking for $ac_hdr" >&5
+echo "configure:2262: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2206 "configure"
+#line 2267 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2272: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_kerberosIV_krb_h = yes ; then
echo $ac_n "checking for main in -lkrb4""... $ac_c" 1>&6
-echo "configure:2240: checking for main in -lkrb4" >&5
+echo "configure:2301: checking for main in -lkrb4" >&5
ac_lib_var=`echo krb4'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb4 -lkrb5 -ldes425 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2248 "configure"
+#line 2309 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2295: checking for $ac_hdr" >&5
+echo "configure:2356: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2300 "configure"
+#line 2361 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2305: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_krb_h = yes ; then
echo $ac_n "checking for main in -lkrb""... $ac_c" 1>&6
-echo "configure:2334: checking for main in -lkrb" >&5
+echo "configure:2395: checking for main in -lkrb" >&5
ac_lib_var=`echo krb'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb -ldes $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2342 "configure"
+#line 2403 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2392: checking for $ac_hdr" >&5
+echo "configure:2453: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2397 "configure"
+#line 2458 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2402: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2463: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_pthread_h = yes ; then
echo $ac_n "checking POSIX thread version""... $ac_c" 1>&6
-echo "configure:2431: checking POSIX thread version" >&5
+echo "configure:2492: checking POSIX thread version" >&5
if eval "test \"`echo '$''{'ol_cv_pthread_version'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2437 "configure"
+#line 2498 "configure"
#include "confdefs.h"
# include <pthread.h>
cat > conftest.$ac_ext <<EOF
-#line 2459 "configure"
+#line 2520 "configure"
#include "confdefs.h"
# include <pthread.h>
echo $ac_n "checking for LinuxThreads""... $ac_c" 1>&6
-echo "configure:2512: checking for LinuxThreads" >&5
+echo "configure:2573: checking for LinuxThreads" >&5
if eval "test \"`echo '$''{'ol_cv_linux_threads'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for pthread_create""... $ac_c" 1>&6
-echo "configure:2538: checking for pthread_create" >&5
+echo "configure:2599: checking for pthread_create" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_create'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2543 "configure"
+#line 2604 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_create(); below. */
; return 0; }
EOF
-if { (eval echo configure:2566: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_pthread_create=yes"
else
if test $ol_link_threads = no ; then
echo $ac_n "checking for pthread_create with -pthread""... $ac_c" 1>&6
-echo "configure:2588: checking for pthread_create with -pthread" >&5
+echo "configure:2649: checking for pthread_create with -pthread" >&5
if eval "test \"`echo '$''{'ol_cv_pthread_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_LIBS="$LIBS"
LIBS="-pthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2596 "configure"
+#line 2657 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:2606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ol_cv_pthread_flag=yes
else
if test $ol_link_threads = no ; then
save_LIBS="$LIBS"
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:2631: checking for pthread_create in -lpthread" >&5
+echo "configure:2692: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2639 "configure"
+#line 2700 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:2650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ol_link_threads = no ; then
save_LIBS="$LIBS"
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:2678: checking for pthread_create in -lc_r" >&5
+echo "configure:2739: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2686 "configure"
+#line 2747 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:2697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ol_link_threads = no ; then
save_LIBS="$LIBS"
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:2725: checking for pthread_create in -lpthread" >&5
+echo "configure:2786: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthread -lmach -lexc -lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2733 "configure"
+#line 2794 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:2744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in sched_yield pthread_yield
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2790: checking for $ac_func" >&5
+echo "configure:2851: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2795 "configure"
+#line 2856 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2818: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2879: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_func_sched_yield = no -a \
$ac_cv_func_pthread_yield = no ; then
echo $ac_n "checking for sched_yield in -lrt""... $ac_c" 1>&6
-echo "configure:2846: checking for sched_yield in -lrt" >&5
+echo "configure:2907: checking for sched_yield in -lrt" >&5
ac_lib_var=`echo rt'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lrt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2854 "configure"
+#line 2915 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:2865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_func_sched_yield = no -a \
$ac_cv_func_pthread_yield = no ; then
echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
-echo "configure:2895: checking for sched_yield in -lposix4" >&5
+echo "configure:2956: checking for sched_yield in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2903 "configure"
+#line 2964 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:2914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in pthread_kill
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2950: checking for $ac_func" >&5
+echo "configure:3011: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2955 "configure"
+#line 3016 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ol_with_preemptive = auto ; then
echo $ac_n "checking for preemptive Pthread implementation""... $ac_c" 1>&6
-echo "configure:3005: checking for preemptive Pthread implementation" >&5
+echo "configure:3066: checking for preemptive Pthread implementation" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: crossing compiling: use --with-preemptive=yes|no|manual" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 3011 "configure"
+#line 3072 "configure"
#include "confdefs.h"
#include <sys/types.h>
}
EOF
-if { (eval echo configure:3055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ol_pthread_preemptive=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3095: checking for $ac_hdr" >&5
+echo "configure:3156: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3100 "configure"
+#line 3161 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3166: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
ol_with_threads=found
echo $ac_n "checking for cthread_fork""... $ac_c" 1>&6
-echo "configure:3135: checking for cthread_fork" >&5
+echo "configure:3196: checking for cthread_fork" >&5
if eval "test \"`echo '$''{'ac_cv_func_cthread_fork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3140 "configure"
+#line 3201 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char cthread_fork(); below. */
; return 0; }
EOF
-if { (eval echo configure:3163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3224: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_cthread_fork=yes"
else
if test $ol_link_threads = no ; then
echo $ac_n "checking for cthread_fork with -all_load""... $ac_c" 1>&6
-echo "configure:3185: checking for cthread_fork with -all_load" >&5
+echo "configure:3246: checking for cthread_fork with -all_load" >&5
if eval "test \"`echo '$''{'ol_cv_cthread_all_load'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_LIBS="$LIBS"
LIBS="-all_load $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3193 "configure"
+#line 3254 "configure"
#include "confdefs.h"
#include <mach/cthreads.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:3202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ol_cv_cthread_all_load=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3241: checking for $ac_hdr" >&5
+echo "configure:3302: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3246 "configure"
+#line 3307 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3251: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3312: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_thread_h = yes -a $ac_cv_header_synch_h = yes ; then
echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
-echo "configure:3279: checking for thr_create in -lthread" >&5
+echo "configure:3340: checking for thr_create in -lthread" >&5
ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3287 "configure"
+#line 3348 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
thr_create()
; return 0; }
EOF
-if { (eval echo configure:3298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3337: checking for $ac_hdr" >&5
+echo "configure:3398: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3342 "configure"
+#line 3403 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3347: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3408: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_lwp_lwp_h = yes ; then
echo $ac_n "checking for lwp_create in -llwp""... $ac_c" 1>&6
-echo "configure:3375: checking for lwp_create in -llwp" >&5
+echo "configure:3436: checking for lwp_create in -llwp" >&5
ac_lib_var=`echo lwp'_'lwp_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-llwp $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3383 "configure"
+#line 3444 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
lwp_create()
; return 0; }
EOF
-if { (eval echo configure:3394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3446: checking for $ac_hdr" >&5
+echo "configure:3507: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3451 "configure"
+#line 3512 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3456: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3517: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in sched_yield pthread_yield
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3485: checking for $ac_func" >&5
+echo "configure:3546: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3490 "configure"
+#line 3551 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for LinuxThreads""... $ac_c" 1>&6
-echo "configure:3539: checking for LinuxThreads" >&5
+echo "configure:3600: checking for LinuxThreads" >&5
if eval "test \"`echo '$''{'ol_cv_linux_threads'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3560: checking for $ac_hdr" >&5
+echo "configure:3621: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3565 "configure"
+#line 3626 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3570: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3631: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3600: checking for $ac_hdr" >&5
+echo "configure:3661: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3605 "configure"
+#line 3666 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3610: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3640: checking for $ac_hdr" >&5
+echo "configure:3701: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3645 "configure"
+#line 3706 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
ol_link_ldbm=no
if test $ol_with_ldbm_api = auto -o $ol_with_ldbm_api = db2 ; then
echo $ac_n "checking for DB2 library""... $ac_c" 1>&6
-echo "configure:3702: checking for DB2 library" >&5
+echo "configure:3763: checking for DB2 library" >&5
if eval "test \"`echo '$''{'ol_cv_lib_db2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_LIBS="$LIBS"
echo $ac_n "checking for db_open in -ldb""... $ac_c" 1>&6
-echo "configure:3708: checking for db_open in -ldb" >&5
+echo "configure:3769: checking for db_open in -ldb" >&5
ac_lib_var=`echo db'_'db_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldb $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3716 "configure"
+#line 3777 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
db_open()
; return 0; }
EOF
-if { (eval echo configure:3727: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3758: checking for $ac_hdr" >&5
+echo "configure:3819: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3763 "configure"
+#line 3824 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3768: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_db_h = yes ; then
echo $ac_n "checking if db.h is DB2""... $ac_c" 1>&6
-echo "configure:3796: checking if db.h is DB2" >&5
+echo "configure:3857: checking if db.h is DB2" >&5
if eval "test \"`echo '$''{'ol_cv_header_db2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3802 "configure"
+#line 3863 "configure"
#include "confdefs.h"
# include <db.h>
echo $ac_n "checking for Berkeley DB2""... $ac_c" 1>&6
-echo "configure:3834: checking for Berkeley DB2" >&5
+echo "configure:3895: checking for Berkeley DB2" >&5
if eval "test \"`echo '$''{'ol_cv_berkeley_db2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test $ol_with_ldbm_api = auto -o $ol_with_ldbm_api = db ; then
echo $ac_n "checking for Berkeley DB library""... $ac_c" 1>&6
-echo "configure:3880: checking for Berkeley DB library" >&5
+echo "configure:3941: checking for Berkeley DB library" >&5
if eval "test \"`echo '$''{'ol_cv_lib_db'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_LIBS="$LIBS"
echo $ac_n "checking for dbopen""... $ac_c" 1>&6
-echo "configure:3886: checking for dbopen" >&5
+echo "configure:3947: checking for dbopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3891 "configure"
+#line 3952 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbopen(); below. */
; return 0; }
EOF
-if { (eval echo configure:3914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_dbopen=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbopen in -ldb""... $ac_c" 1>&6
-echo "configure:3933: checking for dbopen in -ldb" >&5
+echo "configure:3994: checking for dbopen in -ldb" >&5
ac_lib_var=`echo db'_'dbopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldb $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3941 "configure"
+#line 4002 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbopen()
; return 0; }
EOF
-if { (eval echo configure:3952: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3987: checking for $ac_hdr" >&5
+echo "configure:4048: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3992 "configure"
+#line 4053 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4058: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for Berkeley DB""... $ac_c" 1>&6
-echo "configure:4033: checking for Berkeley DB" >&5
+echo "configure:4094: checking for Berkeley DB" >&5
if eval "test \"`echo '$''{'ol_cv_berkeley_db'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4086: checking for $ac_hdr" >&5
+echo "configure:4147: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4091 "configure"
+#line 4152 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4096: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4157: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ol_with_ldbm_api = auto -o $ol_with_ldbm_api = gdbm ; then
echo $ac_n "checking for GDBM library""... $ac_c" 1>&6
-echo "configure:4131: checking for GDBM library" >&5
+echo "configure:4192: checking for GDBM library" >&5
if eval "test \"`echo '$''{'ol_cv_lib_gdbm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_LIBS="$LIBS"
echo $ac_n "checking for gdbm_open""... $ac_c" 1>&6
-echo "configure:4137: checking for gdbm_open" >&5
+echo "configure:4198: checking for gdbm_open" >&5
if eval "test \"`echo '$''{'ac_cv_func_gdbm_open'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4142 "configure"
+#line 4203 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gdbm_open(); below. */
; return 0; }
EOF
-if { (eval echo configure:4165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_gdbm_open=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for gdbm_open in -lgdbm""... $ac_c" 1>&6
-echo "configure:4184: checking for gdbm_open in -lgdbm" >&5
+echo "configure:4245: checking for gdbm_open in -lgdbm" >&5
ac_lib_var=`echo gdbm'_'gdbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgdbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4192 "configure"
+#line 4253 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gdbm_open()
; return 0; }
EOF
-if { (eval echo configure:4203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4238: checking for $ac_hdr" >&5
+echo "configure:4299: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4243 "configure"
+#line 4304 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4248: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4309: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for db""... $ac_c" 1>&6
-echo "configure:4275: checking for db" >&5
+echo "configure:4336: checking for db" >&5
if eval "test \"`echo '$''{'ol_cv_gdbm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test $ol_with_ldbm_api = auto -o $ol_with_ldbm_api = ndbm ; then
echo $ac_n "checking for NDBM library""... $ac_c" 1>&6
-echo "configure:4309: checking for NDBM library" >&5
+echo "configure:4370: checking for NDBM library" >&5
if eval "test \"`echo '$''{'ol_cv_lib_ndbm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_LIBS="$LIBS"
echo $ac_n "checking for dbm_open""... $ac_c" 1>&6
-echo "configure:4315: checking for dbm_open" >&5
+echo "configure:4376: checking for dbm_open" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbm_open'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4320 "configure"
+#line 4381 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbm_open(); below. */
; return 0; }
EOF
-if { (eval echo configure:4343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_dbm_open=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbm_open in -lndbm""... $ac_c" 1>&6
-echo "configure:4362: checking for dbm_open in -lndbm" >&5
+echo "configure:4423: checking for dbm_open in -lndbm" >&5
ac_lib_var=`echo ndbm'_'dbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lndbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4370 "configure"
+#line 4431 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:4381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbm_open in -ldbm""... $ac_c" 1>&6
-echo "configure:4401: checking for dbm_open in -ldbm" >&5
+echo "configure:4462: checking for dbm_open in -ldbm" >&5
ac_lib_var=`echo dbm'_'dbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4409 "configure"
+#line 4470 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:4420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4481: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4457: checking for $ac_hdr" >&5
+echo "configure:4518: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4462 "configure"
+#line 4523 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4467: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4528: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for db""... $ac_c" 1>&6
-echo "configure:4494: checking for db" >&5
+echo "configure:4555: checking for db" >&5
if eval "test \"`echo '$''{'ol_cv_ndbm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test $ol_enable_wrappers = yes ; then
echo $ac_n "checking for hosts_access in -lwrap""... $ac_c" 1>&6
-echo "configure:4542: checking for hosts_access in -lwrap" >&5
+echo "configure:4603: checking for hosts_access in -lwrap" >&5
ac_lib_var=`echo wrap'_'hosts_access | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lwrap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4550 "configure"
+#line 4611 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
hosts_access()
; return 0; }
EOF
-if { (eval echo configure:4561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4607: checking for $ac_hdr" >&5
+echo "configure:4668: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4612 "configure"
+#line 4673 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4617: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ol_link_termcap = no ; then
echo $ac_n "checking for tputs in -ltermcap""... $ac_c" 1>&6
-echo "configure:4646: checking for tputs in -ltermcap" >&5
+echo "configure:4707: checking for tputs in -ltermcap" >&5
ac_lib_var=`echo termcap'_'tputs | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4654 "configure"
+#line 4715 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tputs()
; return 0; }
EOF
-if { (eval echo configure:4665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ol_link_termcap = no ; then
echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
-echo "configure:4698: checking for initscr in -lncurses" >&5
+echo "configure:4759: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lncurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4706 "configure"
+#line 4767 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
initscr()
; return 0; }
EOF
-if { (eval echo configure:4717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# FreeBSD (and others) have crypt(3) in -lcrypt
if test $ol_enable_crypt != no ; then
echo $ac_n "checking for crypt""... $ac_c" 1>&6
-echo "configure:4759: checking for crypt" >&5
+echo "configure:4820: checking for crypt" >&5
if eval "test \"`echo '$''{'ac_cv_func_crypt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4764 "configure"
+#line 4825 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char crypt(); below. */
; return 0; }
EOF
-if { (eval echo configure:4787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_crypt=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
-echo "configure:4806: checking for crypt in -lcrypt" >&5
+echo "configure:4867: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcrypt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4814 "configure"
+#line 4875 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:4825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# FreeBSD (and others) have setproctitle(3) in -lutil
if test $ol_enable_proctitle != no ; then
echo $ac_n "checking for setproctitle""... $ac_c" 1>&6
-echo "configure:4869: checking for setproctitle" >&5
+echo "configure:4930: checking for setproctitle" >&5
if eval "test \"`echo '$''{'ac_cv_func_setproctitle'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4874 "configure"
+#line 4935 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char setproctitle(); below. */
; return 0; }
EOF
-if { (eval echo configure:4897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_setproctitle=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for setproctitle in -lutil""... $ac_c" 1>&6
-echo "configure:4916: checking for setproctitle in -lutil" >&5
+echo "configure:4977: checking for setproctitle in -lutil" >&5
ac_lib_var=`echo util'_'setproctitle | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4924 "configure"
+#line 4985 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
setproctitle()
; return 0; }
EOF
-if { (eval echo configure:4935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:4970: checking for ANSI C header files" >&5
+echo "configure:5031: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4975 "configure"
+#line 5036 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4983: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5044: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 5000 "configure"
+#line 5061 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 5018 "configure"
+#line 5079 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 5039 "configure"
+#line 5100 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:5050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:5083: checking for $ac_hdr that defines DIR" >&5
+echo "configure:5144: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5088 "configure"
+#line 5149 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:5096: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5157: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:5121: checking for opendir in -ldir" >&5
+echo "configure:5182: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5129 "configure"
+#line 5190 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:5140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:5162: checking for opendir in -lx" >&5
+echo "configure:5223: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5170 "configure"
+#line 5231 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:5181: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:5204: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:5265: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5209 "configure"
+#line 5270 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:5225: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5273: checking for $ac_hdr" >&5
+echo "configure:5334: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5278 "configure"
+#line 5339 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5283: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5344: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:5311: checking for uid_t in sys/types.h" >&5
+echo "configure:5372: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5316 "configure"
+#line 5377 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:5345: checking type of array argument to getgroups" >&5
+echo "configure:5406: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 5353 "configure"
+#line 5414 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
}
EOF
-if { (eval echo configure:5378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 5392 "configure"
+#line 5453 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:5416: checking for mode_t" >&5
+echo "configure:5477: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5421 "configure"
+#line 5482 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:5449: checking for off_t" >&5
+echo "configure:5510: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5454 "configure"
+#line 5515 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:5482: checking for pid_t" >&5
+echo "configure:5543: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5487 "configure"
+#line 5548 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:5515: checking return type of signal handlers" >&5
+echo "configure:5576: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5520 "configure"
+#line 5581 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:5537: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5598: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5556: checking for size_t" >&5
+echo "configure:5617: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5561 "configure"
+#line 5622 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:5589: checking for uid_t in sys/types.h" >&5
+echo "configure:5650: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5594 "configure"
+#line 5655 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6
-echo "configure:5623: checking for st_blksize in struct stat" >&5
+echo "configure:5684: checking for st_blksize in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5628 "configure"
+#line 5689 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_blksize;
; return 0; }
EOF
-if { (eval echo configure:5636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blksize=yes
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:5657: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:5718: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5662 "configure"
+#line 5723 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:5671: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5732: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:5692: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:5753: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5697 "configure"
+#line 5758 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:5705: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
echo $ac_n "checking if toupper() requires islower()""... $ac_c" 1>&6
-echo "configure:5728: checking if toupper() requires islower()" >&5
+echo "configure:5789: checking if toupper() requires islower()" >&5
if eval "test \"`echo '$''{'ol_cv_c_upper_lower'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_cv_c_upper_lower=safe
else
cat > conftest.$ac_ext <<EOF
-#line 5737 "configure"
+#line 5798 "configure"
#include "confdefs.h"
#include <ctype.h>
exit(1);
}
EOF
-if { (eval echo configure:5749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ol_cv_c_upper_lower=no
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5772: checking for working const" >&5
+echo "configure:5833: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5777 "configure"
+#line 5838 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:5826: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5887: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
-echo "configure:5849: checking for 8-bit clean memcmp" >&5
+echo "configure:5910: checking for 8-bit clean memcmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_memcmp_clean=no
else
cat > conftest.$ac_ext <<EOF
-#line 5857 "configure"
+#line 5918 "configure"
#include "confdefs.h"
main()
}
EOF
-if { (eval echo configure:5867: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_func_memcmp_clean=yes
else
test $ac_cv_func_memcmp_clean = no && LIBOBJS="$LIBOBJS memcmp.o"
echo $ac_n "checking for strftime""... $ac_c" 1>&6
-echo "configure:5885: checking for strftime" >&5
+echo "configure:5946: checking for strftime" >&5
if eval "test \"`echo '$''{'ac_cv_func_strftime'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5890 "configure"
+#line 5951 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strftime(); below. */
; return 0; }
EOF
-if { (eval echo configure:5913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_strftime=yes"
else
echo "$ac_t""no" 1>&6
# strftime is in -lintl on SCO UNIX.
echo $ac_n "checking for strftime in -lintl""... $ac_c" 1>&6
-echo "configure:5935: checking for strftime in -lintl" >&5
+echo "configure:5996: checking for strftime in -lintl" >&5
ac_lib_var=`echo intl'_'strftime | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5943 "configure"
+#line 6004 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strftime()
; return 0; }
EOF
-if { (eval echo configure:5954: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:5981: checking for vprintf" >&5
+echo "configure:6042: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5986 "configure"
+#line 6047 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:6009: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:6033: checking for _doprnt" >&5
+echo "configure:6094: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6038 "configure"
+#line 6099 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:6061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
fi
echo $ac_n "checking for wait3 that fills in rusage""... $ac_c" 1>&6
-echo "configure:6086: checking for wait3 that fills in rusage" >&5
+echo "configure:6147: checking for wait3 that fills in rusage" >&5
if eval "test \"`echo '$''{'ac_cv_func_wait3_rusage'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_wait3_rusage=no
else
cat > conftest.$ac_ext <<EOF
-#line 6094 "configure"
+#line 6155 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
}
}
EOF
-if { (eval echo configure:6125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_func_wait3_rusage=yes
else
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6179: checking for $ac_func" >&5
+echo "configure:6240: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6184 "configure"
+#line 6245 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in getopt strdup tempnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6235: checking for $ac_func" >&5
+echo "configure:6296: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6240 "configure"
+#line 6301 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Check Configuration
echo $ac_n "checking declaration of sys_errlist""... $ac_c" 1>&6
-echo "configure:6293: checking declaration of sys_errlist" >&5
+echo "configure:6354: checking declaration of sys_errlist" >&5
if eval "test \"`echo '$''{'ol_cv_dcl_sys_errlist'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6299 "configure"
+#line 6360 "configure"
#include "confdefs.h"
#include <stdio.h>
char *c = (char *) *sys_errlist
; return 0; }
EOF
-if { (eval echo configure:6309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6370: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ol_cv_dcl_sys_errlist=yes
else
EOF
echo $ac_n "checking existence of sys_errlist""... $ac_c" 1>&6
-echo "configure:6330: checking existence of sys_errlist" >&5
+echo "configure:6391: checking existence of sys_errlist" >&5
if eval "test \"`echo '$''{'ol_cv_have_sys_errlist'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6336 "configure"
+#line 6397 "configure"
#include "confdefs.h"
#include <errno.h>
int main() {
char *c = (char *) *sys_errlist
; return 0; }
EOF
-if { (eval echo configure:6343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ol_cv_have_sys_errlist=yes
else