+++ /dev/null
-#-----------------------------------------------------------------------------
-# Copyright (c) 1994 Regents of the University of Michigan.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms are permitted
-# provided that this notice is preserved and that due credit is given
-# to the University of Michigan at Ann Arbor. The name of the University
-# may not be used to endorse or promote products derived from this
-# software without specific prior written permission. This software
-# is provided ``as is'' without express or implied warranty.
-#
-# LDAP common Make defines (included in all but top-level Makefile)
-#
-#-----------------------------------------------------------------------------
-
-#############################################################################
-## Edit the following variables to have appropriate values for your system ##
-#############################################################################
-
-#############################################################################
-## LDAP install paths ##
-#############################################################################
-# by default, everything is installed below INSTROOT
-# config files, etc. are put in ETCDIR
-# include files get put in INCLUDEDIR
-# libraries are put in LIBDIR
-# man pages are put under MANDIR
-# programs end-users will run are put in BINDIR
-# programs sysadmins will run are put in SBINDIR
-# servers are put in LIBEXECDIR
-# pid/args files are put in RUNDIR
-#
-# Per platform defaults override these.
-#
-LDAP_PREFIX?= /usr/local
-LDAP_INSTROOT?= $(LDAP_PREFIX)
-LDAP_ETCDIR?= $(LDAP_INSTROOT)/etc/ldap
-LDAP_INCDIR?= $(LDAP_INSTROOT)/include
-LDAP_LIBDIR?= $(LDAP_INSTROOT)/lib
-LDAP_MANDIR?= $(LDAP_INSTROOT)/man
-LDAP_BINDIR?= $(LDAP_INSTROOT)/bin
-LDAP_SBINDIR?=$(LDAP_INSTROOT)/sbin
-LDAP_LIBEXECDIR?= $(LDAP_INSTROOT)/libexec
-LDAP_RUNDIR?= $(LDAP_ETCDIR)
-
-#############################################################################
-## General compiler options ##
-#############################################################################
-# Passed to every compile (cc or gcc). This is where you put -O or -g, etc.
-EXTRACFLAGS=-O -g
-#EXTRACFLAGS=-O
-#EXTRACFLAGS=-g
-# Passed to every link (ld). Include -g here if you did in EXTRACFLAGS.
-EXTRALDFLAGS=-g
-
-#############################################################################
-## If you are NOT using Kerberos authentication, you can skip this section.##
-#############################################################################
-#
-# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
-# AFSKERBEROS if you are running the AFS version of kerberos). Also
-# uncomment and change the various KRB* lines to point to where the
-# kerberos libraries and include files are installed at your site.
-#
-#KERBEROS=-DKERBEROS
-#AFSKERBEROS=-DAFSKERBEROS
-#KRBINCLUDEFLAG = -I/usr/local/kerberos/include
-#KRBLIBFLAG = -L/usr/local/kerberos/lib
-#KRBLIBS = -lkrb -ldes
-
-#############################################################################
-## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ##
-## If you don't want to build it, you can skip this section. ##
-#############################################################################
-#
-# To build the ldap server, uncomment the HAVEISODE line,
-# and the section describing build settings for your version of isode.
-#
-#HAVEISODE = yes
-# If you compiled ISODE with TURBO_DISK defined, uncomment this
-#ISODETURBOLIBS = -lgdbm
-# uncomment these to have ldapd "pretty print" protocol elements w/debugging
-#PEPSY_DUMP=-DPEPSY_DUMP
-#PEPSY=/usr/local/ic/bin/pepsy
-# uncommment this line to have ldapd load PP syntax handlers
-# you'll also need to add -lpp to ISODEBASELIBS below
-#LDAP_USE_PP=-DLDAP_USE_PP
-# uncomment NO_SETPROCTITLE to have ldapd NOT change its title
-#NO_SETPROCTITLE=-DNOSETPROCTITLE
-#
-# ISODE Consortium release build settings
-# You should change the next line so that ICRELEASE matches the (integer)
-# version number of whatever IC release you have, e.g. 1, 2, or 3 and
-# also uncomment the next 5 lines.
-#ICRELEASE=-DICRELEASE=1
-#ISODEPACKAGE=-DISODEPACKAGE=IC
-#ISODEINCLUDEFLAG= -I/usr/local/ic/include/isode -I/usr/local/ic/include
-#ISODELIBFLAG = -L/usr/local/ic/lib
-#ISODEBASELIBS = -lisode
-#
-# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
-#ISODEPACKAGE=-DISODEPACKAGE
-#ISODEINCLUDEFLAG= -I/usr/local/isode/include
-#ISODELIBFLAG = -L/usr/local/isode/lib
-#ISODEBASELIBS = -ldsap -lisode
-#
-# NEXOR ISODE release build settings (uncomment the next 4 lines)
-#ISODEPACKAGE=-DISODEPACKAGE=XT
-#ISODEINCLUDEFLAG= -I/usr/include/isode
-#ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib
-#ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi
-
-#############################################################################
-## If you don't want to run slapd, skip this section. ##
-#############################################################################
-#
-# To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD
-# line and select the SLAPD_BACKENDS you want to use. If you enable the
-# LDBM backend, also select one of the LDBM backends.
-MAKESLAPD= yes
-#
-# remove the defines for backends you don't want to enable
-SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD
-#
-# If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line you need
-# to specify which low-level database package to use. There are
-# four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm.
-# You will also need to edit the include and lib strings appropriately.
-#
-# berkeley db btree package
-#LDBMLIB=-ldb
-#LDBMBACKEND?=-DLDBM_USE_DBBTREE
-#LDBMINCLUDE?=-I/usr/local/db/include
-#LDBMLIB?=-ldb
-# berkeley db hash package
-#LDBMBACKEND?=-DLDBM_USE_DBHASH
-#LDBMINCLUDE?=-I/usr/local/db/include
-#LDBMLIB?=-ldb
-# gnu dbm (gdbm)
-#LDBMBACKEND?=-DLDBM_USE_GDBM
-#LDBMINCLUDE?=-I/usr/local/gdbm/include
-#LDBMLIB?=-lgdbm
-# standard unix ndbm
-LDBMBACKEND?=-DLDBM_USE_NDBM
-LDBMINCLUDE?=
-LDBMLIB?=
-
-# if you want to use a non-default threads package change the defines below
-# to one of:
-# -DPOSIX_THREADS (draft 10 or standard)
-# -DTHREAD_MIT_PTHREADS (draft 4)
-# -DTHREAD_NEXT_CTHREADS
-# -DTHREAD_DCE_PTHREADS
-# -DTHREAD_SUNOS4_LWP
-# -DTHREAD_SUNOS5_LWP
-# and select the appropriate library.
-#THREADS?=-DNO_THREADS
-#THREADSLIB?=
-
-# Locations of auxilary programs
-# (excepts to below are generally defined in Make-platform)
-LDAP_SENDMAIL?=/usr/lib/sendmail
-LDAP_EDITOR?=/usr/ucb/vi
-LDAP_FINGER?=/usr/ucb/finger
-
-# For generation of compressed man pages
-# (excepts to below are generally defined in Make-platform)
-MANCOMPRESS?=cat
-MANCOMPRESSSUFFIX?=
-
-#############################################################################
-## The following options are used by the xax500 client. If you haven't ##
-## retrieved the xax500 source and dropped it into the "clients" ##
-## directory, you can skip this section. ##
-#############################################################################
-#
-# location of your X include files
-#XINCLUDES= -I/usr/X11/include
-#
-# location of your X libraries
-#XLIBDIRS=-L/usr/X11/lib
-#
-# include any extra X libraries you need here
-# the following works with sunos 4 and X11R5
-#XLIBS = $(XLIBDIRS) -lXm -lXt -lX11
-# the following has been known to work with Solaris 2.4 and X11R6
-#XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11
-
-#############################################################################
-## If you don't want to do auto-translation of character sets, skip this ##
-#############################################################################
-#
-# Otherwise, uncomment this line and set the following options.
-#STR_TRANSLATION=-DSTR_TRANSLATION
-#
-# remove the defines for LDAP client library T.61 character translation
-# you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591"
-# with the number of the particular character set you use. E.g., use "88594"
-# if you use the ISO 8859-4 chracter set.
-#LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591"
-#
-# uncomment one these lines to enable automatic T.61 translation by default
-#LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859
-
-#############################################################################
-## General options ##
-#############################################################################
-# uncomment this line to enable debugging code (a good idea)
-LDAP_DEBUG=-DLDAP_DEBUG
-
-# uncomment this line to turn on a few U of Michigan specific things
-#UOFM=-DUOFM
-
-# uncomment this line to delete a few printfs in the lber and ldap libraries.
-#NO_USERINTERFACE=-DNO_USERINTERFACE
-
-# uncomment this line to include Connectionless LDAP support
-#CLDAP=-DCLDAP
-
-# uncomment this line to eliminate local caching support in the libldap
-#NO_CACHE=-DNO_CACHE
-
-# uncomment this line to enable support for LDAP referrals in libldap
-LDAP_REFERRALS=-DLDAP_REFERRALS
-
-# uncomment these lines to enable support for CRYPT passwords in LDBM.
-# LDAP_CRYPT=-DLDAP_CRYPT
-# LDAP_CRYPT_LIB?=
-# and comment this line out
-LDAP_CRYPT_LIB=
-
-# uncomment these lines to enable support fro tcp_wrappers in servers.
-# Requires tcp_wrappers.
-# LDAP_TCP_WRAPPERS=-DTCP_WRAPPERS -I/usr/local/include
-# LDAP_TCP_WRAPPERS_LIB=-L/usr/local/lib -lwrap
-
-# uncomment this line to use soundex for approximate matches in slapd.
-# the default is to use the metaphone algorithm.
-#PHONETIC=-DSOUNDEX
--- /dev/null
+#-----------------------------------------------------------------------------
+# Copyright (c) 1994 Regents of the University of Michigan.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms are permitted
+# provided that this notice is preserved and that due credit is given
+# to the University of Michigan at Ann Arbor. The name of the University
+# may not be used to endorse or promote products derived from this
+# software without specific prior written permission. This software
+# is provided ``as is'' without express or implied warranty.
+#
+# LDAP common Make defines (included in all but top-level Makefile)
+#
+#-----------------------------------------------------------------------------
+
+#############################################################################
+## Edit the following variables to have appropriate values for your system ##
+#############################################################################
+
+#############################################################################
+## LDAP install paths ##
+#############################################################################
+# by default, everything is installed below INSTROOT
+# config files, etc. are put in ETCDIR
+# include files get put in INCLUDEDIR
+# libraries are put in LIBDIR
+# man pages are put under MANDIR
+# programs end-users will run are put in BINDIR
+# programs sysadmins will run are put in SBINDIR
+# servers are put in LIBEXECDIR
+# pid/args files are put in RUNDIR
+#
+# Per platform defaults override these.
+#
+LDAP_PREFIX?= /usr/local
+LDAP_INSTROOT?= $(LDAP_PREFIX)
+LDAP_ETCDIR?= $(LDAP_INSTROOT)/etc/ldap
+LDAP_INCDIR?= $(LDAP_INSTROOT)/include
+LDAP_LIBDIR?= $(LDAP_INSTROOT)/lib
+LDAP_MANDIR?= $(LDAP_INSTROOT)/man
+LDAP_BINDIR?= $(LDAP_INSTROOT)/bin
+LDAP_SBINDIR?=$(LDAP_INSTROOT)/sbin
+LDAP_LIBEXECDIR?= $(LDAP_INSTROOT)/libexec
+LDAP_RUNDIR?= $(LDAP_ETCDIR)
+
+#############################################################################
+## General compiler options ##
+#############################################################################
+# Passed to every compile (cc or gcc). This is where you put -O or -g, etc.
+EXTRACFLAGS=-O -g
+#EXTRACFLAGS=-O
+#EXTRACFLAGS=-g
+# Passed to every link (ld). Include -g here if you did in EXTRACFLAGS.
+EXTRALDFLAGS=-g
+
+#############################################################################
+## If you are NOT using Kerberos authentication, you can skip this section.##
+#############################################################################
+#
+# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
+# AFSKERBEROS if you are running the AFS version of kerberos). Also
+# uncomment and change the various KRB* lines to point to where the
+# kerberos libraries and include files are installed at your site.
+#
+#KERBEROS=-DKERBEROS
+#AFSKERBEROS=-DAFSKERBEROS
+#KRBINCLUDEFLAG = -I/usr/local/kerberos/include
+#KRBLIBFLAG = -L/usr/local/kerberos/lib
+#KRBLIBS = -lkrb -ldes
+
+#############################################################################
+## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ##
+## If you don't want to build it, you can skip this section. ##
+#############################################################################
+#
+# To build the ldap server, uncomment the HAVEISODE line,
+# and the section describing build settings for your version of isode.
+#
+#HAVEISODE = yes
+# If you compiled ISODE with TURBO_DISK defined, uncomment this
+#ISODETURBOLIBS = -lgdbm
+# uncomment these to have ldapd "pretty print" protocol elements w/debugging
+#PEPSY_DUMP=-DPEPSY_DUMP
+#PEPSY=/usr/local/ic/bin/pepsy
+# uncommment this line to have ldapd load PP syntax handlers
+# you'll also need to add -lpp to ISODEBASELIBS below
+#LDAP_USE_PP=-DLDAP_USE_PP
+# uncomment NO_SETPROCTITLE to have ldapd NOT change its title
+#NO_SETPROCTITLE=-DNOSETPROCTITLE
+#
+# ISODE Consortium release build settings
+# You should change the next line so that ICRELEASE matches the (integer)
+# version number of whatever IC release you have, e.g. 1, 2, or 3 and
+# also uncomment the next 5 lines.
+#ICRELEASE=-DICRELEASE=1
+#ISODEPACKAGE=-DISODEPACKAGE=IC
+#ISODEINCLUDEFLAG= -I/usr/local/ic/include/isode -I/usr/local/ic/include
+#ISODELIBFLAG = -L/usr/local/ic/lib
+#ISODEBASELIBS = -lisode
+#
+# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
+#ISODEPACKAGE=-DISODEPACKAGE
+#ISODEINCLUDEFLAG= -I/usr/local/isode/include
+#ISODELIBFLAG = -L/usr/local/isode/lib
+#ISODEBASELIBS = -ldsap -lisode
+#
+# NEXOR ISODE release build settings (uncomment the next 4 lines)
+#ISODEPACKAGE=-DISODEPACKAGE=XT
+#ISODEINCLUDEFLAG= -I/usr/include/isode
+#ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib
+#ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi
+
+#############################################################################
+## If you don't want to run slapd, skip this section. ##
+#############################################################################
+#
+# To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD
+# line and select the SLAPD_BACKENDS you want to use. If you enable the
+# LDBM backend, also select one of the LDBM backends.
+MAKESLAPD= yes
+#
+# remove the defines for backends you don't want to enable
+SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD
+#
+# If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line you need
+# to specify which low-level database package to use. There are
+# four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm.
+# You will also need to edit the include and lib strings appropriately.
+#
+# berkeley db btree package
+#LDBMLIB=-ldb
+#LDBMBACKEND?=-DLDBM_USE_DBBTREE
+#LDBMINCLUDE?=-I/usr/local/db/include
+#LDBMLIB?=-ldb
+# berkeley db hash package
+#LDBMBACKEND?=-DLDBM_USE_DBHASH
+#LDBMINCLUDE?=-I/usr/local/db/include
+#LDBMLIB?=-ldb
+# gnu dbm (gdbm)
+#LDBMBACKEND?=-DLDBM_USE_GDBM
+#LDBMINCLUDE?=-I/usr/local/gdbm/include
+#LDBMLIB?=-lgdbm
+# standard unix ndbm
+LDBMBACKEND?=-DLDBM_USE_NDBM
+LDBMINCLUDE?=
+LDBMLIB?=
+
+#undef these if you have SLEEPYCAT DB2 installed
+#LDBMBACKEND=-DLDBM_USE_DBBTREE -DHAVE_SLEEPYCAT_DB2
+#LDBMINCLUDE=-I/usr/local/include
+#LDBMLIB=-L/usr/local/lib -ldb
+
+# if you want to use a non-default threads package change the defines below
+# to one of:
+# -DPOSIX_THREADS (draft 10 or standard)
+# -DTHREAD_MIT_PTHREADS (draft 4)
+# -DTHREAD_NEXT_CTHREADS
+# -DTHREAD_DCE_PTHREADS
+# -DTHREAD_SUNOS4_LWP
+# -DTHREAD_SUNOS5_LWP
+# and select the appropriate library.
+#THREADS?=-DNO_THREADS
+#THREADSLIB?=
+
+# Locations of auxilary programs
+# (excepts to below are generally defined in Make-platform)
+LDAP_SENDMAIL?=/usr/lib/sendmail
+LDAP_EDITOR?=/usr/ucb/vi
+LDAP_FINGER?=/usr/ucb/finger
+
+# For generation of compressed man pages
+# (excepts to below are generally defined in Make-platform)
+MANCOMPRESS?=cat
+MANCOMPRESSSUFFIX?=
+
+#############################################################################
+## The following options are used by the xax500 client. If you haven't ##
+## retrieved the xax500 source and dropped it into the "clients" ##
+## directory, you can skip this section. ##
+#############################################################################
+#
+# location of your X include files
+#XINCLUDES= -I/usr/X11/include
+#
+# location of your X libraries
+#XLIBDIRS=-L/usr/X11/lib
+#
+# include any extra X libraries you need here
+# the following works with sunos 4 and X11R5
+#XLIBS = $(XLIBDIRS) -lXm -lXt -lX11
+# the following has been known to work with Solaris 2.4 and X11R6
+#XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11
+
+#############################################################################
+## If you don't want to do auto-translation of character sets, skip this ##
+#############################################################################
+#
+# Otherwise, uncomment this line and set the following options.
+#STR_TRANSLATION=-DSTR_TRANSLATION
+#
+# remove the defines for LDAP client library T.61 character translation
+# you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591"
+# with the number of the particular character set you use. E.g., use "88594"
+# if you use the ISO 8859-4 chracter set.
+#LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591"
+#
+# uncomment one these lines to enable automatic T.61 translation by default
+#LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859
+
+#############################################################################
+## General options ##
+#############################################################################
+# uncomment this line to enable debugging code (a good idea)
+LDAP_DEBUG=-DLDAP_DEBUG
+
+# uncomment this line to turn on a few U of Michigan specific things
+#UOFM=-DUOFM
+
+# uncomment this line to delete a few printfs in the lber and ldap libraries.
+#NO_USERINTERFACE=-DNO_USERINTERFACE
+
+# uncomment this line to include Connectionless LDAP support
+#CLDAP=-DCLDAP
+
+# uncomment this line to eliminate local caching support in the libldap
+#NO_CACHE=-DNO_CACHE
+
+# uncomment this line to enable support for LDAP referrals in libldap
+LDAP_REFERRALS=-DLDAP_REFERRALS
+
+# uncomment these lines to enable support for CRYPT passwords in LDBM.
+# LDAP_CRYPT=-DLDAP_CRYPT
+# LDAP_CRYPT_LIB?=
+# and comment this line out
+LDAP_CRYPT_LIB=
+
+# uncomment these lines to enable support fro tcp_wrappers in servers.
+# Requires tcp_wrappers.
+# LDAP_TCP_WRAPPERS=-DTCP_WRAPPERS -I/usr/local/include
+# LDAP_TCP_WRAPPERS_LIB=-L/usr/local/lib -lwrap
+
+# uncomment this line to use soundex for approximate matches in slapd.
+# the default is to use the metaphone algorithm.
+#PHONETIC=-DSOUNDEX
+++ /dev/null
-#-----------------------------------------------------------------------------
-# Copyright (c) 1994 Regents of the University of Michigan.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms are permitted
-# provided that this notice is preserved and that due credit is given
-# to the University of Michigan at Ann Arbor. The name of the University
-# may not be used to endorse or promote products derived from this
-# software without specific prior written permission. This software
-# is provided ``as is'' without express or implied warranty.
-#
-# LDAP common Make defines (included in all but top-level Makefile)
-#
-#-----------------------------------------------------------------------------
-
-#############################################################################
-## Edit the following variables to have appropriate values for your system ##
-#############################################################################
-
-#############################################################################
-## LDAP install paths ##
-#############################################################################
-#
-# by default, everything is installed below INSTROOT
-# servers, config files, etc. are put in ETCDIR
-# include files get put in INCLUDEDIR
-# libraries are put in LIBDIR
-# man pages are put under MANDIR
-# programs end-users will run are put in BINDIR
-#
-INSTROOT=/usr/local
-ETCDIR= $(INSTROOT)/etc
-INCLUDEDIR= $(INSTROOT)/include
-LIBDIR= $(INSTROOT)/lib
-MANDIR= $(INSTROOT)/man
-BINDIR= $(INSTROOT)/bin
-#
-# if you want things to run in a different directory from where they
-# are installed, set this accordingly (this path gets compiled into a
-# few binaries). otherwise, leave it alone.
-RUNTIMEETCDIR= $(ETCDIR)
-
-#############################################################################
-## General compiler options ##
-#############################################################################
-# Passed to every compile (cc or gcc). This is where you put -O or -g, etc.
-EXTRACFLAGS=-g
-# Passed to every link (ld). Include -g here if you did in EXTRACFLAGS.
-EXTRALDFLAGS=-g
-
-#############################################################################
-## If you are NOT using Kerberos authentication, you can skip this section.##
-#############################################################################
-#
-# Otherwise, to enable kerberos authentication, uncomment KERBEROS (and
-# AFSKERBEROS if you are running the AFS version of kerberos). Also
-# uncomment and change the various KRB* lines to point to where the
-# kerberos libraries and include files are installed at your site.
-#
-KERBEROS=-DKERBEROS
-AFSKERBEROS=-DAFSKERBEROS
-KRBINCLUDEFLAG = -I/usr/local/kerberos/include
-KRBLIBFLAG = -L/usr/local/kerberos/lib
-KRBLIBS = -lkrb -ldes
-
-#############################################################################
-## ISODE is required ONLY to build the ldap <-> X.500 server (ldapd) ##
-## If you don't want to build it, you can skip this section. ##
-#############################################################################
-#
-# To build the ldap server, uncomment the HAVEISODE line,
-# and the section describing build settings for your version of isode.
-#
-HAVEISODE = yes
-# If you compiled ISODE with TURBO_DISK defined, uncomment this
-#ISODETURBOLIBS = -lgdbm
-# uncomment these to have ldapd "pretty print" protocol elements w/debugging
-PEPSY_DUMP=-DPEPSY_DUMP
-PEPSY=/usr/local/ic/bin/pepsy
-# uncommment this line to have ldapd load PP syntax handlers
-# you'll also need to add -lpp to ISODEBASELIBS below
-#LDAP_USE_PP=-DLDAP_USE_PP
-# uncomment NO_SETPROCTITLE to have ldapd NOT change its title
-#NO_SETPROCTITLE=-DNOSETPROCTITLE
-#
-# ISODE Consortium release build settings
-# You should change the next line so that ICRELEASE matches the (integer)
-# version number of whatever IC release you have, e.g. 1, 2, or 3 and
-# also uncomment the next 5 lines.
-ICRELEASE=-DICRELEASE=2
-ISODEPACKAGE=-DISODEPACKAGE=IC
-ISODEINCLUDEFLAG= -I/usr/local/ic/include
-ISODELIBFLAG = -L/usr/local/ic/lib
-ISODEBASELIBS = -lisode
-#
-# Freely available ISODE 8.0 release build settings (uncomment the next 4 lines)
-#ISODEPACKAGE=-DISODEPACKAGE
-#ISODEINCLUDEFLAG= -I/usr/local/isode/include
-#ISODELIBFLAG = -L/usr/local/isode/lib
-#ISODEBASELIBS = -ldsap -lisode
-#
-# NEXOR ISODE release build settings (uncomment the next 4 lines)
-#ISODEPACKAGE=-DISODEPACKAGE=XT
-#ISODEINCLUDEFLAG= -I/usr/include/isode
-#ISODELIBFLAG = -L/usr/local/lib -L/usr/sunlink/osi/lib
-#ISODEBASELIBS = -lxtpp -lresolv -lxtdsap -lxtisode -losi
-
-#############################################################################
-## If you don't want to run slapd, skip this section. ##
-#############################################################################
-#
-# To build slapd (the stand-alone ldap daemon), uncomment the MAKESLAPD
-# line and select the SLAPD_BACKENDS you want to use. If you enable the
-# LDBM backend, also select one of the LDBM backends.
-MAKESLAPD= yes
-#
-# remove the defines for backends you don't want to enable
-SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL -DLDAP_PASSWD
-#
-# If you have included -DLDAP_LDBM in the SLAPD_BACKENDS line you need
-# to specify which low-level database package to use. There are
-# four choices: Berkeley db b-tree, Berkeley db hash, GNU dbm, or ndbm.
-#
-# berkeley db btree package
-LDBMBACKEND=-DLDBM_USE_DBBTREE
-LDBMINCLUDE=-I/usr/local/include
-LDBMLIB=-ldb
-# berkeley db hash package
-#LDBMBACKEND=-DLDBM_USE_DBHASH
-#LDBMINCLUDE=-I/usr/local/include
-#LDBMLIB=-ldb
-# gnu dbm (gdbm)
-#LDBMBACKEND=-DLDBM_USE_GDBM
-#LDBMINCLUDE=-I/usr/local/include
-#LDBMLIB=-lgdbm
-# standard unix ndbm
-#LDBMBACKEND=-DLDBM_USE_NDBM
-#
-# if you want to use a non-default threads package change these lines
-#THREADS=-DNO_THREADS
-#THREADSLIB=
-
-#############################################################################
-## The following options are used by the xax500 client. If you haven't ##
-## retrieved the xax500 source and dropped it into the "clients" ##
-## directory, you can skip this section. ##
-#############################################################################
-#
-# location of your X include files
-#XINCLUDES= -I/usr/local/X11/include
-#
-# location of your X libraries
-#XLIBDIRS=-L/usr/local/X11/lib
-#
-# include any extra X libraries you need here
-# the following works with sunos 4 and X11R5
-#XLIBS = $(XLIBDIRS) -lXm -lXt -lX11
-# the following has been known to work with Solaris 2.4 and X11R6
-#XLIBS = $(XLIBDIRS) -lXm -lXext -lSM -lICE -lXpm -lXt -lX11
-
-#############################################################################
-## If you don't want to do auto-translation of character sets, skip this ##
-#############################################################################
-#
-# Otherwise, uncomment this line and set the following options.
-#STR_TRANSLATION=-DSTR_TRANSLATION
-#
-# remove the defines for LDAP client library T.61 character translation
-# you do not need. If you use LDAP_CHARSET_8859, replace the '1' in "88591"
-# with the number of the particular character set you use. E.g., use "88594"
-# if you use the ISO 8859-4 chracter set.
-#LIBLDAP_CHARSETS=-DLDAP_CHARSET_8859="88591"
-#
-# uncomment one these lines to enable automatic T.61 translation by default
-#LIBLDAP_DEF_CHARSET=-DLDAP_DEFAULT_CHARSET=LDAP_CHARSET_8859
-
-#############################################################################
-## General options ##
-#############################################################################
-# uncomment this line to enable debugging code (a good idea)
-LDAP_DEBUG=-DLDAP_DEBUG
-
-# uncomment this line to turn on a few U of Michigan specific things
-UOFM=-DUOFM
-
-# uncomment this line to delete a few printfs in the lber and ldap libraries.
-#NO_USERINTERFACE=-DNO_USERINTERFACE
-
-# uncomment this line to include Connectionless LDAP support
-CLDAP=-DCLDAP
-
-# uncomment this line to eliminate local caching support in the libldap
-#NO_CACHE=-DNO_CACHE
-
-# uncomment this line to enable support for LDAP referrals in libldap
-LDAP_REFERRALS=-DLDAP_REFERRALS
-
-# uncomment this line to use soundex for approximate matches in slapd.
-# the default is to use the metaphone algorithm.
-#PHONETIC=-DSOUNDEX
echo "** Set platform to $$PLATFORM with compiler $$CC..."; \
echo ""
+Make-common: Make-common.dist
+ @if [ -f Make-common ]; then \
+ echo "Make-common.dist newer than Make-common, check for new options" ;\
+ echo "or touch Make-common to ignore."; \
+ exit 1; \
+ fi; \
+ cp Make-common.dist Make-common; \
+ echo "Make-common installed from distribution." ; \
+ echo " Edit as needed before making!" ; \
+ exit 1
#
# rule to build Makefiles by concatenating Make-template file in each
# subdirectory with global Make-common, .make-platform, and
#include <sys/types.h>
#include <limits.h>
#include <fcntl.h>
-#include <db.h>
+
+#ifdef HAVE_SLEEPYCAT_DB2
+# include <db_185.h>
+#else
+# include <db.h>
+#endif
typedef DBT Datum;
#define dsize size
#include <sys/types.h>
#include <limits.h>
#include <fcntl.h>
-#include <db.h>
+#ifdef HAVE_SLEEPYCAT_DB2
+# include <db_185.h>
+#else
+# include <db.h>
+#endif
typedef DBT Datum;
#define dsize size
Debug( LDAP_DEBUG_TRACE, "do_ldap_select\n", 0, 0, 0 );
if ( tblsize == 0 ) {
-#ifdef FD_SETSIZE
- /*
- * It is invalid to use a set size in excess of the type
- * scope, as defined for the fd_set in sys/types.h. This
- * is true for any OS.
- */
- tblsize = FD_SETSIZE;
-#else /* !FD_SETSIZE*/
#ifdef USE_SYSCONF
tblsize = sysconf( _SC_OPEN_MAX );
-#else /* USE_SYSCONF */
+#else /* !USE_SYSCONF */
tblsize = getdtablesize();
-#endif /* USE_SYSCONF */
-#endif /* !FD_SETSIZE*/
+#endif /* !USE_SYSCONF */
+
+#ifdef FD_SETSIZE
+ if( tblsize > FD_SETSIZE ) {
+ tblsize = FD_SETSIZE;
+ }
+#endif /* FD_SETSIZE*/
}
sip = (struct selectinfo *)ld->ld_selectinfo;
static int tblsize;
if ( tblsize == 0 ) {
-#ifdef FD_SETSIZE
- /*
- * It is invalid to use a set size in excess of the type
- * scope, as defined for the fd_set in sys/types.h. This
- * is true for any OS.
- */
- tblsize = FD_SETSIZE;
-#else /* !FD_SETSIZE*/
#ifdef USE_SYSCONF
tblsize = sysconf( _SC_OPEN_MAX );
-#else /* USE_SYSCONF */
+#else /* !USE_SYSCONF */
tblsize = getdtablesize();
-#endif /* USE_SYSCONF */
-#endif /* !FD_SETSIZE*/
+#endif /* !USE_SYSCONF */
+#ifdef FD_SETSIZE
+ if ( tblsize > FD_SETSIZE ) {
+ tblsize = FD_SETSIZE;
+ }
+#endif /* FD_SETSIZE */
}
FD_ZERO( &readfds );
Debug( LDAP_DEBUG_TRACE, "do_ldap_select\n", 0, 0, 0 );
if ( tblsize == 0 ) {
-#ifdef FD_SETSIZE
- /*
- * It is invalid to use a set size in excess of the type
- * scope, as defined for the fd_set in sys/types.h. This
- * is true for any OS.
- */
- tblsize = FD_SETSIZE;
-#else /* !FD_SETSIZE*/
#ifdef USE_SYSCONF
tblsize = sysconf( _SC_OPEN_MAX );
#else /* USE_SYSCONF */
tblsize = getdtablesize();
#endif
#endif /* USE_SYSCONF */
-#endif /* !FD_SETSIZE*/
+#ifdef FD_SETSIZE
+ if( tblsize > FD_SETSIZE ) {
+ tblsize = FD_SETSIZE;
+ }
+#endif /* FD_SETSIZE*/
}
sip = (struct selectinfo *)ld->ld_selectinfo;
projects / openldap / commitdiff