Replace portLONG with long, portCHAR with char, and portSHORT with short.

git-svn-id: https://svn.code.sf.net/p/freertos/code/trunk@1333 1d2547de-c912-0410-9cb9-b8ca96c0e9e2

diff --git a/Demo/PIC32MX_MPLAB/serial/serial.c b/Demo/PIC32MX_MPLAB/serial/serial.c
index 7bc98af09fd411828701401198bd848f32e971c4..98d9a4d1f72b10449bafc8a6d13cce7ad85e1eeb 100644 (file)
--- a/Demo/PIC32MX_MPLAB/serial/serial.c
+++ b/Demo/PIC32MX_MPLAB/serial/serial.c
@@ -90,16 +90,16 @@ void __attribute__( (interrupt(ipl1), vector(_UART2_VECTOR))) vU2InterruptWrappe
 \r
 /*-----------------------------------------------------------*/\r
 \r
-xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )\r
+xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )\r
 {\r
-unsigned portSHORT usBRG;\r
+unsigned short usBRG;\r
 \r
        /* Create the queues used by the com test task. */\r
-       xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );\r
-       xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );\r
+       xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );\r
+       xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );\r
 \r
        /* Configure the UART and interrupts. */\r
-       usBRG = (unsigned portSHORT)(( (float)configPERIPHERAL_CLOCK_HZ / ( (float)16 * (float)ulWantedBaud ) ) - (float)0.5);\r
+       usBRG = (unsigned short)(( (float)configPERIPHERAL_CLOCK_HZ / ( (float)16 * (float)ulWantedBaud ) ) - (float)0.5);\r
        OpenUART2( UART_EN, UART_RX_ENABLE | UART_TX_ENABLE | UART_INT_TX | UART_INT_RX_CHAR, usBRG );\r
        ConfigIntUART2( ( configKERNEL_INTERRUPT_PRIORITY + 1 ) | UART_INT_SUB_PR0 | UART_TX_INT_EN | UART_RX_INT_EN );\r
 \r
@@ -110,7 +110,7 @@ unsigned portSHORT usBRG;
 }\r
 /*-----------------------------------------------------------*/\r
 \r
-signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )\r
+signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, portTickType xBlockTime )\r
 {\r
        /* Only one port is supported. */\r
        ( void ) pxPort;\r
@@ -128,7 +128,7 @@ signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcR
 }\r
 /*-----------------------------------------------------------*/\r
 \r
-signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )\r
+signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, portTickType xBlockTime )\r
 {\r
        /* Only one port is supported. */\r
        ( void ) pxPort;\r
@@ -159,7 +159,7 @@ void vSerialClose( xComPortHandle xPort )
 void vU2InterruptHandler( void )\r
 {\r
 /* Declared static to minimise stack use. */\r
-static portCHAR cChar;\r
+static char cChar;\r
 static portBASE_TYPE xHigherPriorityTaskWoken;\r
 \r
        xHigherPriorityTaskWoken = pdFALSE;\r