#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# checks if i3 supports I3_SYNC
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
use List::Util qw(first);
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
use X11::XCB 'PROP_MODE_REPLACE';
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Beware that this test uses workspace 9 to perform some tests (it expects
# the workspace to be empty).
# TODO: skip it by default?
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Checks if the focus is correctly restored, when creating a floating client
# over an unfocused tiling client and destroying the floating one again.
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Beware that this test uses workspace 9 to perform some tests (it expects
# the workspace to be empty).
# TODO: skip it by default?
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
use File::Temp;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
use List::Util qw(first);
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
use List::Util qw(first);
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests whether we can switch to a non-existant workspace
# (necessary for further tests)
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests whether opening an empty container and killing it again works
#
use List::Util qw(first);
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests all kinds of matching methods
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests multiple commands (using ';') and multiple operations (using ',')
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests focus switching (next/prev)
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests splitting
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests moving. Basically, there are four different code-paths:
# 1) move a container which cannot be moved (single container on a workspace)
# 2) move a container before another single container
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: closing of floating clients did crash i3 when closing the
# container which contained this client.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: make a container floating, kill its parent, make it tiling again
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Check if new containers are opened after the currently focused one instead
# of always at the end
use List::Util qw(first);
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Check if the focus is correctly restored after closing windows.
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Check if empty split containers are automatically closed.
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Check if stacking containers can be used independantly of
# the split mode (horizontal/vertical) of the underlying
# container.
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Checks if the 'move [window/container] to workspace' command works correctly
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Checks if size hints are interpreted correctly.
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
#
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
-# Regression test: when only having a floating window on a workspace, it should not be deleted.
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
+# Regression test: when only having a floating window on a workspace, it should
+# not be deleted.
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test: Floating windows were not correctly unmapped when switching
# to a different workspace.
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test: New windows were attached to the container of a floating window
# if only a floating window is present on the workspace.
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Check if numbered workspaces and named workspaces are sorted in the right way
# in get_workspaces IPC output (necessary for i3bar etc.).
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: Check if the focus stays the same when switching the layout
# bug introduced by 77d0d42ed2d7ac8cafe267c92b35a81c1b9491eb
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests resizing tiling containers
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: move a floating window to a different workspace crashes i3
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: floating windows are tiling after restarting, closing them crashes i3
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: when resizing two containers on a workspace, opening a floating
# client, then closing it again, i3 will re-distribute the space on the
# workspace as if a tiling container was closed, leading to the containers
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# by moving the window in the opposite orientation that its parent has, we
# force i3 to create a new split container with the appropriate orientation.
# However, when doing that two times in a row, we end up with two split
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
use i3test;
my $tmp = fresh_workspace;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test for moving a con outside of a floating con when there are no
# tiling cons on a workspace
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test for correct focus behaviour when moving a floating con to
# another workspace.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test for inplace restarting with dock clients
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test for setting a window to floating, tiling and opening a new window
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test for using level-up to get to the 'content'-container and
# toggle floating
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Test if the requested width/height is set after making the window floating.
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test for closing one of multiple dock clients
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Test to see if i3 combines the geometry of all children in a split container
# when setting the split container to floating
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Test if new containers get focused when there is a fullscreen container at
# the time of launching the new one. Also make sure that focusing containers
# in other workspaces work even when there is a fullscreen container.
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if the WM_TAKE_FOCUS protocol is correctly handled by i3
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if the various ipc_socket_path options are correctly handled
#
use i3test i3_autostart => 0;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test to check if borders are correctly restored after an inplace
# restart.
# found in eb8ad348b28e243cba1972e802ca8ee636472fc9
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test for setting the urgent hint on dock clients.
# found in 4be3178d4d360c2996217d811e61161c84d25898
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if WM_STATE is WM_STATE_NORMAL when mapped and WM_STATE_WITHDRAWN when
# unmapped.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if WM_STATE is WM_STATE_NORMAL when mapped and WM_STATE_WITHDRAWN when
# unmapped.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
use i3test i3_autostart => 0;
use X11::XCB qw(PROP_MODE_REPLACE);
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if assignments work
#
use i3test i3_autostart => 0;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests the workspace_layout config option.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that i3 survives inplace restarts with fullscreen containers
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if the 'border toggle' command works correctly
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if the 'force_focus_wrapping' config directive works correctly.
#
use i3test i3_autostart => 0;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if i3-migrate-config-to-v4 correctly migrates all config file
# directives and commands
#
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# checks if i3 starts up on workspace '1' or the first configured named workspace
#
use i3test i3_autostart => 0;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# checks if the IPC message type get_marks works correctly
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: Checks if focus is stolen when a window is managed which is
# assigned to an invisible workspace
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests the new_window and new_float config option.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: Checks if i3 still lives after using 'focus mode_toggle' on an
# empty workspace. This regression was fixed in
# 0848844f2d41055f6ffc69af1149d7a873460976.
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Test for the startup notification protocol.
#
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Checks if the 'workspace back_and_forth' command and the
# 'workspace_auto_back_and_forth' config directive work correctly.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Checks that the bar config is parsed correctly.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if empty workspaces are closed when the last child
# exits, as long as they're not empty.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# The command "move workspace prev; workspace prev" will lead to an error.
# This regression is present in 7f9b65f6a752e454c492447be4e21e2ee8faf8fd
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that i3 does not leak any file descriptors in 'exec'.
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test: Changing border style should not have an impact on the size
# (geometry) of the child window. See ticket http://bugs.i3wm.org/561
# Wrong behaviour manifested itself up to (including) commit
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test: Focusing a dock window should just do nothing, not crash i3.
# See ticket http://bugs.i3wm.org/575
# Wrong behaviour manifested itself up to (including) commit
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Checks that variables are parsed correctly by using for_window rules with
# variables in it.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression: resizing a floating split container leads to a crash.
# (Ticket #588, present until 4412ccbe5a4fad8a4cd594e6f10f937515a4d37c)
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests for the scratchpad functionality.
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test: New windows were not opened in the correct place if they
# matched an assignment.
# Wrong behaviour manifested itself up to (including) commit
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests the standalone parser binary to see if it calls the right code when
# confronted with various commands, if it prints proper error messages for
# wrong commands and if it terminates in every case.
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that i3 survives inplace restarts with fullscreen containers
#
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests the floating_{minimum,maximum}_size config options.
#
# Note that the minimum floating window size is already verified in
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Test for ticket #676: 'scratchpad show' causes a segfault if the scratchpad
# window is shown on another workspace.
#
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that you can resize across different levels of containers even when
# they are all of the same orientation.
# (Ticket #754)
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that switching between the different layouts works as expected.
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that we can get the version number of i3 via IPC.
use i3test;
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that the size requested by floating windows is set by i3, no matter
# to which value the new_window option is set.
# ticket #770, bug still present in commit ae88accf6fe3817ff42d0d51be1965071194766e
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that the _NET_ACTIVE_WINDOW message only changes focus when the
# window is on a visible workspace.
# ticket #774, bug still present in commit 1e49f1b08a3035c1f238fcd6615e332216ab582e
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verify that i3 allows strange RandR output names such as DVI-I_1/digital.
# Ticket: #785
# Bug still in: 4.2-256-ga007283
#!perl
# vim:ts=4:sw=4:expandtab
+#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Regression test: moving a window to the right out of a splitv container would
# make it vanish.
# Ticket: #790
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests that the provided X-Server to the t/5??-*.t tests is actually providing
# multiple monitors.
#
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that scratchpad windows show up on the proper output.
# ticket #596, bug present until up to commit
# 89dded044b4fffe78f9d70778748fabb7ac533e9.
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies the 'focus output' command works properly.
use i3test i3_autostart => 0;
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests whether 'workspace next_on_output' and the like work correctly.
#
use List::Util qw(first);
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests whether the 'move workspace <ws> to [output] <output>' command works
#
use List::Util qw(first);
#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • http://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • http://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • http://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Verifies that scratchpad windows don’t move due to floating point caulcation
# errors when repeatedly hiding/showing, no matter what display resolution.
#
projects / i3 / i3 / commitdiff