jtag: use register_commands()

Use register commands with command registration array.

diff --git a/src/jtag/tcl.c b/src/jtag/tcl.c
index bd672b6f6c72239580a77e4d035ad89ebf70956c..81dbdb5919f4309bbbc64c5e66a0d91641040e0e 100644 (file)
--- a/src/jtag/tcl.c
+++ b/src/jtag/tcl.c
@@ -1413,66 +1413,129 @@ COMMAND_HANDLER(handle_tms_sequence_command)
        return ERROR_OK;
 }
 
+static const struct command_registration jtag_command_handlers[] = {
+       {
+               .name = "interface",
+               .handler = &handle_interface_command,
+               .mode = COMMAND_CONFIG,
+               .help = "select a JTAG interface",
+               .usage = "<driver_name>",
+       },
+       {
+               .name = "interface_list",
+               .handler = &handle_interface_list_command,
+               .mode = COMMAND_ANY,
+               .help = "list all built-in interfaces",
+       },
+       {
+               .name = "jtag_khz",
+               .handler = &handle_jtag_khz_command,
+               .mode = COMMAND_ANY,
+               .help = "set maximum jtag speed (if supported)",
+               .usage = "<khz:0=rtck>",
+       },
+       {
+               .name = "jtag_rclk",
+               .handler = &handle_jtag_rclk_command,
+               .mode = COMMAND_ANY,
+               .help = "set JTAG speed to RCLK or use fallback speed",
+               .usage = "<fallback_speed_khz>",
+       },
+       {
+               .name = "reset_config",
+               .handler = &handle_reset_config_command,
+               .mode = COMMAND_ANY,
+               .help = "configure JTAG reset behavior",
+               .usage = "[none|trst_only|srst_only|trst_and_srst] "
+                       "[srst_pulls_trst|trst_pulls_srst|combined|separate] "
+                       "[srst_gates_jtag|srst_nogate] "
+                       "[trst_push_pull|trst_open_drain] "
+                       "[srst_push_pull|srst_open_drain]",
+       },
+       {
+               .name = "jtag_nsrst_delay",
+               .handler = &handle_jtag_nsrst_delay_command,
+               .mode = COMMAND_ANY,
+               .help = "delay after deasserting srst in ms",
+               .usage = "<ms>",
+       },
+       {
+               .name = "jtag_ntrst_delay",
+               .handler = &handle_jtag_ntrst_delay_command,
+               .mode = COMMAND_ANY,
+               .help = "delay after deasserting trst in ms",
+               .usage = "<ms>"
+       },
+       {
+               .name = "jtag_nsrst_assert_width",
+               .handler = &handle_jtag_nsrst_assert_width_command,
+               .mode = COMMAND_ANY,
+               .help = "delay after asserting srst in ms",
+               .usage = "<ms>"
+       },
+       {
+               .name = "jtag_ntrst_assert_width",
+               .handler = &handle_jtag_ntrst_assert_width_command,
+               .mode = COMMAND_ANY,
+               .help = "delay after asserting trst in ms",
+               .usage = "<ms>"
+       },
+       {
+               .name = "scan_chain",
+               .handler = &handle_scan_chain_command,
+               .mode = COMMAND_EXEC,
+               .help = "print current scan chain configuration",
+       },
+       {
+               .name = "jtag_reset",
+               .handler = &handle_jtag_reset_command,
+               .mode = COMMAND_EXEC,
+               .help = "toggle reset lines",
+               .usage = "<trst> <srst>",
+       },
+       {
+               .name = "runtest",
+               .handler = &handle_runtest_command,
+               .mode = COMMAND_EXEC,
+               .help = "move to Run-Test/Idle, and execute <num_cycles>",
+               .usage = "<num_cycles>"
+       },
+       {
+               .name = "irscan",
+               .handler = &handle_irscan_command,
+               .mode = COMMAND_EXEC,
+               .help = "execute IR scan",
+               .usage = "<device> <instr> [dev2] [instr2] ...",
+       },
+       {
+               .name = "verify_ircapture",
+               .handler = &handle_verify_ircapture_command,
+               .mode = COMMAND_ANY,
+               .help = "verify value captured during Capture-IR",
+               .usage = "<enable | disable>",
+       },
+       {
+               .name = "verify_jtag",
+               .handler = &handle_verify_jtag_command,
+               .mode = COMMAND_ANY,
+               .help = "verify value capture",
+               .usage = "<enable | disable>",
+       },
+       {
+               .name = "tms_sequence",
+               .handler = &handle_tms_sequence_command,
+               .mode = COMMAND_ANY,
+               .help = "choose short(default) or long tms_sequence",
+               .usage = "<short | long>",
+       },
+       COMMAND_REGISTRATION_DONE
+};
+
 int jtag_register_commands(struct command_context *cmd_ctx)
 {
        register_jim(cmd_ctx, "jtag", jim_jtag_command,
                        "perform jtag tap actions");
 
-       COMMAND_REGISTER(cmd_ctx, NULL, "interface",
-                       handle_interface_command, COMMAND_CONFIG,
-                       "try to configure interface");
-       COMMAND_REGISTER(cmd_ctx, NULL, "interface_list",
-                       &handle_interface_list_command, COMMAND_ANY,
-                       "list all built-in interfaces");
-
-       COMMAND_REGISTER(cmd_ctx, NULL, "jtag_khz",
-                       handle_jtag_khz_command, COMMAND_ANY,
-                       "set maximum jtag speed (if supported); "
-                       "parameter is maximum khz, or 0 for adaptive clocking (RTCK).");
-       COMMAND_REGISTER(cmd_ctx, NULL, "jtag_rclk",
-                       handle_jtag_rclk_command, COMMAND_ANY,
-                       "fallback_speed_khz - set JTAG speed to RCLK or use fallback speed");
-       COMMAND_REGISTER(cmd_ctx, NULL, "reset_config",
-                       handle_reset_config_command, COMMAND_ANY,
-                       "reset_config "
-                       "[none|trst_only|srst_only|trst_and_srst] "
-                       "[srst_pulls_trst|trst_pulls_srst|combined|separate] "
-                       "[srst_gates_jtag|srst_nogate] "
-                       "[trst_push_pull|trst_open_drain] "
-                       "[srst_push_pull|srst_open_drain]");
-
-       COMMAND_REGISTER(cmd_ctx, NULL, "jtag_nsrst_delay",
-                       handle_jtag_nsrst_delay_command, COMMAND_ANY,
-                       "jtag_nsrst_delay <ms> "
-                       "- delay after deasserting srst in ms");
-       COMMAND_REGISTER(cmd_ctx, NULL, "jtag_ntrst_delay",
-                       handle_jtag_ntrst_delay_command, COMMAND_ANY,
-                       "jtag_ntrst_delay <ms> "
-                       "- delay after deasserting trst in ms");
-
-       COMMAND_REGISTER(cmd_ctx, NULL, "jtag_nsrst_assert_width",
-                       handle_jtag_nsrst_assert_width_command, COMMAND_ANY,
-                       "jtag_nsrst_assert_width <ms> "
-                       "- delay after asserting srst in ms");
-       COMMAND_REGISTER(cmd_ctx, NULL, "jtag_ntrst_assert_width",
-                       handle_jtag_ntrst_assert_width_command, COMMAND_ANY,
-                       "jtag_ntrst_assert_width <ms> "
-                       "- delay after asserting trst in ms");
-
-       COMMAND_REGISTER(cmd_ctx, NULL, "scan_chain",
-                       handle_scan_chain_command, COMMAND_EXEC,
-                       "print current scan chain configuration");
-
-       COMMAND_REGISTER(cmd_ctx, NULL, "jtag_reset",
-                       handle_jtag_reset_command, COMMAND_EXEC,
-                       "toggle reset lines <trst> <srst>");
-       COMMAND_REGISTER(cmd_ctx, NULL, "runtest",
-                       handle_runtest_command, COMMAND_EXEC,
-                       "move to Run-Test/Idle, and execute <num_cycles>");
-       COMMAND_REGISTER(cmd_ctx, NULL, "irscan",
-                       handle_irscan_command, COMMAND_EXEC,
-                       "execute IR scan <device> <instr> [dev2] [instr2] ...");
-
        register_jim(cmd_ctx, "drscan", Jim_Command_drscan,
                        "execute DR scan <device> "
                        "<num_bits> <value> <num_bits1> <value2> ...");
@@ -1484,18 +1547,7 @@ int jtag_register_commands(struct command_context *cmd_ctx)
                        "<state1>,<state2>,<state3>... "
                        "- move JTAG to state1 then to state2, state3, etc.");
 
-       COMMAND_REGISTER(cmd_ctx, NULL, "verify_ircapture",
-                       handle_verify_ircapture_command, COMMAND_ANY,
-                       "verify value captured during Capture-IR <enable | disable>");
-       COMMAND_REGISTER(cmd_ctx, NULL, "verify_jtag",
-                       handle_verify_jtag_command, COMMAND_ANY,
-                       "verify value capture <enable | disable>");
-
-       COMMAND_REGISTER(cmd_ctx, NULL, "tms_sequence",
-                       handle_tms_sequence_command, COMMAND_ANY,
-                       "choose short(default) or long tms_sequence <short | long>");
-
-       return ERROR_OK;
+       return register_commands(cmd_ctx, NULL, jtag_command_handlers);
 }