target.cfg: update to use new flash configuration syntax

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

diff --git a/tcl/target/aduc702x.cfg b/tcl/target/aduc702x.cfg
index 58cc9b9873034a502072870422a795abff1eb977..50b2a0de527d328140a07106e11e0e5f5a701961 100644 (file)
--- a/tcl/target/aduc702x.cfg
+++ b/tcl/target/aduc702x.cfg
@@ -36,7 +36,7 @@ $_TARGETNAME configure -work-area-phys 0x10000 -work-area-size 0x2000
 ## flash configuration
 # only target number is needed
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME aduc702x 0 0 0 0 0
+flash bank $_FLASHNAME aduc702x 0 0 0 0 $_TARGETNAME
 
 ## If you use the watchdog, the following code makes sure that the board
 ## doesn't reboot when halted via JTAG.  Yes, on the older generation

diff --git a/tcl/target/faux.cfg b/tcl/target/faux.cfg
index 6fe0cd799dc3f83008e207195b3cf821bab962cd..b2bdb2b6a89f371962662f79a2443a0d29009c0e 100644 (file)
--- a/tcl/target/faux.cfg
+++ b/tcl/target/faux.cfg
@@ -27,4 +27,4 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 
 #dummy flash driver
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME faux 0x01000000 0x200000 2 2 0
+flash bank $_FLASHNAME faux 0x01000000 0x200000 2 2 $_TARGETNAME

diff --git a/tcl/target/lpc2900.cfg b/tcl/target/lpc2900.cfg
index 769d39d4e753082053c7aedafbae84bd5502c166..b2580861ee06c43d140efc8831b9aaf8f5c7a183 100644 (file)
--- a/tcl/target/lpc2900.cfg
+++ b/tcl/target/lpc2900.cfg
@@ -63,4 +63,4 @@ arm7_9 dcc_downloads enable
 # Flash:   flash bank lpc2900 0 0 0 0 <target#> <flash clock (CLK_SYS_FMC) in kHz>
 # Flash base address, total flash size, and number of sectors are all configured automatically.
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME lpc2900         0 0 0 0 $_TARGETNAME $FLASH_CLOCK
+flash bank $_FLASHNAME lpc2900 0 0 0 0 $_TARGETNAME $FLASH_CLOCK

diff --git a/tcl/target/mega128.cfg b/tcl/target/mega128.cfg
index 2bc22949707a823cad67d13626dda198a2a4bde2..2cf31d619c66515ef4271b4b23533ae7b30ad1b0 100644 (file)
--- a/tcl/target/mega128.cfg
+++ b/tcl/target/mega128.cfg
@@ -23,7 +23,7 @@ target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME
 #$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
 
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME avr 0 0 0 0 0
+flash bank $_FLASHNAME avr 0 0 0 0 $_TARGETNAME
 
 #to use it, script will be like:
 #init

diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg
index a346c471c3128085fb56e2c7827f4e1f8eab14ce..e0ebdc267c318bb735fc3688cb8342b678685be4 100644 (file)
--- a/tcl/target/pic32mx.cfg
+++ b/tcl/target/pic32mx.cfg
@@ -34,9 +34,9 @@ target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAM
 $_TARGETNAME configure -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0
 
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME pic32mx 0xbd000000 0 0 0 0
+flash bank $_FLASHNAME pic32mx 0xbd000000 0 0 0 $_TARGETNAME
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME pic32mx 0xbfc00000 0 0 0 0
+flash bank $_FLASHNAME pic32mx 0xbfc00000 0 0 0 $_TARGETNAME
 
 # For more information about the configuration files, take a look at:
 # openocd.texi

diff --git a/tcl/target/sam7se512.cfg b/tcl/target/sam7se512.cfg
index d2550678bcfc36d89cff8a7f35b5dd45d23e3557..c48afeffd54027f67b796e96da2612fb35f2b65f 100644 (file)
--- a/tcl/target/sam7se512.cfg
+++ b/tcl/target/sam7se512.cfg
@@ -36,5 +36,5 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a
 
 #flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
+flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432
 

diff --git a/tcl/target/sam7x256.cfg b/tcl/target/sam7x256.cfg
index 5bab642152a0216b93c6233a41ba18a1a4e28f10..19145e5c528c6ddc9e0393570bdf0e69df97a5c3 100644 (file)
--- a/tcl/target/sam7x256.cfg
+++ b/tcl/target/sam7x256.cfg
@@ -47,7 +47,7 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a
 
 #flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
+flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432
 
 # For more information about the configuration files, take a look at:
 # openocd.texi

diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg
index 395a26cdff0449f125b294aaf3eb3678bfbbb3e0..9da69acad4982dd4c026c402650209c60a39b12b 100644 (file)
--- a/tcl/target/str710.cfg
+++ b/tcl/target/str710.cfg
@@ -40,9 +40,9 @@ $_TARGETNAME configure -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-a
 
 #flash bank str7x <base> <size> 0 0 <target#> <variant>
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 0 STR71x
+flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 0 STR71x
+flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 $_TARGETNAME STR71x
 
 # For more information about the configuration files, take a look at:
 # openocd.texi

diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg
index 6432d1542841e05584a8b3f40edcad6b9f950d5e..381fa5fcac03e3f273071b49e20060fbff9d9027 100644 (file)
--- a/tcl/target/str730.cfg
+++ b/tcl/target/str730.cfg
@@ -43,5 +43,5 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 0 STR3x
+flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 $_TARGETNAME STR3x
 

diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg
index 496c4e3cfdcf87455ce098793be410324dfe2037..5df968bfc146e3918082abf77a66816b9afd4765 100644 (file)
--- a/tcl/target/str750.cfg
+++ b/tcl/target/str750.cfg
@@ -46,7 +46,7 @@ $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-a
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 0 STR75x
+flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 $_TARGETNAME STR75x
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 0 STR75x
+flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 $_TARGETNAME STR75x
 

diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg
index d84458495eee154462533eb69205dc10c99eeba1..2defe9fddb497185fd1898e243bcdfb922e821ff 100644 (file)
--- a/tcl/target/str912.cfg
+++ b/tcl/target/str912.cfg
@@ -64,9 +64,9 @@ $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-ar
 
 #flash bank str9x <base> <size> 0 0 <target#> <variant>
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
+flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 $_TARGETNAME
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
+flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 $_TARGETNAME
 
 # For more information about the configuration files, take a look at:
 # openocd.texi