cfg: add default pid/vid pair to beaglebone board cfg.

The newer versions of BeagleBone boards use the default vid/pid
pair for FT2232 debugging.  Please see the following README:
http://beagleboard.org/static/beaglebone/latest/README.htm
On revision A3/A4 boards, the VID/PID were chosen to match the
 TI XDS100v2 (0x0403/0xA6D0). On A5 and newer revisions when we've
 given the authors of CCS the chance to update their software, the
generic FTDI VID/PID (0x0403/0x6010) will be used to simplify
installation of drivers for systems already having those drivers.

Change-Id: I44228eb2029162f23d084eb05bcfef39e615668d
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/619
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

diff --git a/tcl/board/ti_beaglebone.cfg b/tcl/board/ti_beaglebone.cfg
index be4da201bc5af0fe98f6cde4da80224988d37b93..52989b3fbccadc3e71f7ff2d2ffbc6443f7400d0 100644 (file)
--- a/tcl/board/ti_beaglebone.cfg
+++ b/tcl/board/ti_beaglebone.cfg
@@ -5,7 +5,7 @@
 interface ft2232
 #ft2232_device_desc "BeagleBone A"
 ft2232_layout xds100v2
-ft2232_vid_pid 0x0403 0xa6d0
+ft2232_vid_pid 0x0403 0xa6d0 0x0403 0x6010
 
 adapter_khz 16000