Updates and fixes from Kees Jongenburger

git-svn-id: svn://svn.berlios.de/openocd/trunk@1239 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/target/target/s3c2440.cfg b/src/target/target/s3c2440.cfg
deleted file mode 100644 (file)
index eba1a81..0000000
--- a/src/target/target/s3c2440.cfg
+++ /dev/null
@@ -1,37 +0,0 @@
-# Target configuration for the Samsung 2440 system on chip
-# Tested on a S3C2440 Evaluation board
-# Processor       : ARM920Tid(wb) rev 0 (v4l)
-# Info:   JTAG device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0)
-# [Duane Ellis 27/nov/2008: Above 0x0032409d appears to be copy/paste from other places]
-# [and I do not believe it to be accurate, hence the 0xffffffff below]
-
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME s3c2440
-}
-
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
-  # this defaults to a bigendian
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # force an error till we get a good number
-   set _CPUTAPID 0xFFFFFFFF
-}
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1
-
-#reset configuration
-reset_config trst_and_srst
-

diff --git a/src/target/target/samsung_s3c2440.cfg b/src/target/target/samsung_s3c2440.cfg
new file mode 100644 (file)
index 0000000..12bb408
--- /dev/null
+++ b/src/target/target/samsung_s3c2440.cfg
@@ -0,0 +1,35 @@
+# Target configuration for the Samsung 2440 system on chip
+# Tested on a S3C2440 Evaluation board by keesj
+# Processor       : ARM920Tid(wb) rev 0 (v4l)
+# Info:   JTAG tap: s3c2440.cpu tap/device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0)
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME s3c2440
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+  # this defaults to a bigendian
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0x0032409d
+}
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1
+
+#reset configuration
+reset_config trst_and_srst
+