Michael Hasselberg <mh@open-engineering.de> target configuration files for Toshiba...

git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg
new file mode 100644 (file)
index 0000000..450a75b
--- /dev/null
+++ b/tcl/board/topas910.cfg
@@ -0,0 +1,118 @@
+######################################
+# Target:    Toshiba TOPAS910 -- TMPA910 Starterkit
+#
+######################################
+
+# We add to the minimal configuration.
+source [find target/tmpa910.cfg]
+
+######################
+# Target configuration
+######################
+
+#$_TARGETNAME configure -event gdb-attach { reset init }
+$_TARGETNAME configure -event reset-init { topas910_init }
+
+proc topas910_init { } {
+# Init PLL
+# my settings
+       mww 0xf005000c 0x00000007
+       mww 0xf0050010 0x00000065
+       mww 0xf005000c 0x000000a7
+       sleep 10
+       mdw 0xf0050008
+       mww 0xf0050008 0x00000002
+       mww 0xf0050004 0x00000000
+# NEW: set CLKCR5
+       mww 0xf0050054 0x00000040
+#
+       sleep 10
+# Init SDRAM
+#  _PMCDRV          = 0x00000071;
+#  //
+#  // Initialize SDRAM timing paramater
+#  //
+#  _DMC_CAS_LATENCY = 0x00000006;
+#  _DMC_T_DQSS      = 0x00000000;
+#  _DMC_T_MRD       = 0x00000002;
+#  _DMC_T_RAS       = 0x00000007;
+#
+#  _DMC_T_RC        = 0x0000000A;
+#  _DMC_T_RCD       = 0x00000013;
+#
+#  _DMC_T_RFC       = 0x0000010A;
+#
+#  _DMC_T_RP        = 0x00000013;
+#  _DMC_T_RRD       = 0x00000002;
+#  _DMC_T_WR        = 0x00000002;
+#  _DMC_T_WTR       = 0x00000001;
+#  _DMC_T_XP        = 0x0000000A;
+#  _DMC_T_XSR       = 0x0000000B;
+#  _DMC_T_ESR       = 0x00000014;
+#
+#  //
+#  // Configure SDRAM type parameter
+#  _DMC_MEMORY_CFG  = 0x00008011;
+#  _DMC_USER_CONFIG = 0x00000011;   
+#  // 32 bit memory interface
+#
+#
+#  _DMC_REFRESH_PRD = 0x00000A60;
+#  _DMC_CHIP_0_CFG  = 0x000140FC;
+#
+#  _DMC_DIRECT_CMD  = 0x000C0000;
+#  _DMC_DIRECT_CMD  = 0x00000000;
+#
+#  _DMC_DIRECT_CMD  = 0x00040000;
+#  _DMC_DIRECT_CMD  = 0x00040000;
+#  _DMC_DIRECT_CMD  = 0x00080031;
+#  //
+#  // Finally start SDRAM
+#  //
+#  _DMC_MEMC_CMD    = MEMC_CMD_GO;
+#  */
+
+       mww 0xf0020260 0x00000071
+       mww 0xf4300014 0x00000006
+       mww 0xf4300018 0x00000000
+       mww 0xf430001C 0x00000002
+       mww 0xf4300020 0x00000007
+       mww 0xf4300024 0x0000000A
+       mww 0xf4300028 0x00000013
+       mww 0xf430002C 0x0000010A
+       mww 0xf4300030 0x00000013
+       mww 0xf4300034 0x00000002
+       mww 0xf4300038 0x00000002
+       mww 0xf430003C 0x00000001
+       mww 0xf4300040 0x0000000A
+       mww 0xf4300044 0x0000000B
+       mww 0xf4300048 0x00000014
+       mww 0xf430000C 0x00008011
+       mww 0xf4300304 0x00000011
+       mww 0xf4300010 0x00000A60
+       mww 0xf4300200 0x000140FC
+       mww 0xf4300008 0x000C0000
+       mww 0xf4300008 0x00000000
+       mww 0xf4300008 0x00040000
+       mww 0xf4300008 0x00040000
+       mww 0xf4300008 0x00080031
+       mww 0xf4300004 0x00000000
+
+       sleep 10
+#      jtag_speed 10000
+
+# remap off in case of IROM boot 
+       mww 0xf0000004 0x00000001
+
+}
+
+# comment the following out if usinf J-Link, it soes not support DCC
+arm7_9 dcc_downloads enable       # Enable faster DCC downloads
+
+
+#####################
+# Flash configuration
+#####################
+
+#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+flash bank cfi 0x20000000 0x2000000 2 2 0

diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg
new file mode 100644 (file)
index 0000000..9d3ced9
--- /dev/null
+++ b/tcl/board/topasa900.cfg
@@ -0,0 +1,125 @@
+# Thanks to Pieter Conradie for this script! 
+# Target:    Toshiba TOPAS900 -- TMPA900 Starterkit
+######################################
+
+# We add to the minimal configuration.
+source [find target/tmpa900.cfg]
+
+######################
+# Target configuration
+######################
+
+#$_TARGETNAME configure -event gdb-attach { reset init }
+$_TARGETNAME configure -event reset-init { topasa900_init }
+
+proc topasa900_init { } {
+# Init PLL
+# my settings
+       mww 0xf005000c 0x00000007
+       mww 0xf0050010 0x00000065
+       mww 0xf005000c 0x000000a7
+       sleep 10
+       mdw 0xf0050008
+       mww 0xf0050008 0x00000002
+       mww 0xf0050004 0x00000000
+# NEW: set CLKCR5
+       mww 0xf0050054 0x00000040
+#
+# bplan settings
+#      mww 0xf0050004 0x00000000
+#      mww 0xf005000c 0x000000a7
+#      sleep 10
+#      mdw 0xf0050008
+#      mww 0xf0050008 0x00000002
+#      mww 0xf0050010 0x00000065
+#      mww 0xf0050054 0x00000040
+       sleep 10
+# Init SDRAM
+#  _PMCDRV          = 0x00000071;
+#  //
+#  // Initialize SDRAM timing paramater
+#  //
+#  _DMC_CAS_LATENCY = 0x00000006;
+#  _DMC_T_DQSS      = 0x00000000;
+#  _DMC_T_MRD       = 0x00000002;
+#  _DMC_T_RAS       = 0x00000007;
+#
+#  _DMC_T_RC        = 0x0000000A;
+#  _DMC_T_RCD       = 0x00000013;
+#
+#  _DMC_T_RFC       = 0x0000010A;
+#
+#  _DMC_T_RP        = 0x00000013;
+#  _DMC_T_RRD       = 0x00000002;
+#  _DMC_T_WR        = 0x00000002;
+#  _DMC_T_WTR       = 0x00000001;
+#  _DMC_T_XP        = 0x0000000A;
+#  _DMC_T_XSR       = 0x0000000B;
+#  _DMC_T_ESR       = 0x00000014;
+#
+#  //
+#  // Configure SDRAM type parameter
+#  _DMC_MEMORY_CFG  = 0x00008011;
+#  _DMC_USER_CONFIG = 0x00000011;   // 32 bit memory interface
+#
+#
+#  _DMC_REFRESH_PRD = 0x00000A60;
+#  _DMC_CHIP_0_CFG  = 0x000140FC;
+#
+#  _DMC_DIRECT_CMD  = 0x000C0000;
+#  _DMC_DIRECT_CMD  = 0x00000000;
+#
+#  _DMC_DIRECT_CMD  = 0x00040000;
+#  _DMC_DIRECT_CMD  = 0x00040000;
+#  _DMC_DIRECT_CMD  = 0x00080031;
+#  //
+#  // Finally start SDRAM
+#  //
+#  _DMC_MEMC_CMD    = MEMC_CMD_GO;
+#  */
+
+       mww 0xf0020260 0x00000071
+       mww 0xf4300014 0x00000006
+       mww 0xf4300018 0x00000000
+       mww 0xf430001C 0x00000002
+       mww 0xf4300020 0x00000007
+       mww 0xf4300024 0x0000000A
+       mww 0xf4300028 0x00000013
+       mww 0xf430002C 0x0000010A
+       mww 0xf4300030 0x00000013
+       mww 0xf4300034 0x00000002
+       mww 0xf4300038 0x00000002
+       mww 0xf430003C 0x00000001
+       mww 0xf4300040 0x0000000A
+       mww 0xf4300044 0x0000000B
+       mww 0xf4300048 0x00000014
+       mww 0xf430000C 0x00008011
+       mww 0xf4300304 0x00000011
+       mww 0xf4300010 0x00000A60
+       mww 0xf4300200 0x000140FC
+       mww 0xf4300008 0x000C0000
+       mww 0xf4300008 0x00000000
+       mww 0xf4300008 0x00040000
+       mww 0xf4300008 0x00040000
+       mww 0xf4300008 0x00080031
+       mww 0xf4300004 0x00000000
+
+       sleep 10
+#      jtag_speed 10000
+
+# remap off in case of IROM boot 
+       mww 0xf0000004 0x00000001
+
+}
+
+# comment the following out if usinf J-Link, it soes not support DCC
+arm7_9 dcc_downloads enable       # Enable faster DCC downloads
+
+
+#####################
+# Flash configuration
+#####################
+
+#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+flash bank cfi 0x20000000 0x1000000 2 2 0
+

diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg
new file mode 100644 (file)
index 0000000..1bdf6a1
--- /dev/null
+++ b/tcl/target/tmpa900.cfg
@@ -0,0 +1,56 @@
+######################################
+# Target:    Toshiba TMPA910
+######################################
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME tmpa910
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0x07926031
+}
+
+#TMPA910 has following IDs:
+# CP15.0 register 0x41069265
+# CP15.1 register 0x1d152152
+# ARM core 0x07926031
+
+
+#
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+jtag_nsrst_delay 20
+jtag_ntrst_delay 20
+
+######################
+# Target configuration
+######################
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+
+# built-in RAM0
+#working_area 0 0xf8004000 0x4000 nobackup
+# built-in RAM1
+#working_area 1 0xf8008000 0x4000 nobackup
+# built-in RAM2
+#working_area 2 0xf800c000 0x4000 nobackup
+# built-in RAM 0-2 48k total
+#working_area 0 0xf8004000 0xc000 nobackup
+
+# Internal sram1 memory
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0x8000 \
+-work-area-backup 0

diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg
new file mode 100644 (file)
index 0000000..3ed3253
--- /dev/null
+++ b/tcl/target/tmpa910.cfg
@@ -0,0 +1,56 @@
+######################################
+# Target:    Toshiba TMPA910
+######################################
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME tmpa910
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0x07926031
+}
+
+#TMPA910 has following IDs:
+# CP15.0 register 0x41069265
+# CP15.1 register 0x1d152152
+# ARM core 0x07926031
+
+
+#
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+jtag_nsrst_delay 20
+jtag_ntrst_delay 20
+
+######################
+# Target configuration
+######################
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+
+# built-in RAM0
+#working_area 0 0xf8004000 0x4000 nobackup
+# built-in RAM1
+#working_area 1 0xf8008000 0x4000 nobackup
+# built-in RAM2
+#working_area 2 0xf800c000 0x4000 nobackup
+# built-in RAM 0-2 48k total
+#working_area 0 0xf8004000 0xc000 nobackup
+
+# Internal sram1 memory
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0xc000 \
+-work-area-backup 0