* Copyright (C) 2011 by Jean-Christophe PLAGNIOL-VIILARD *
* plagnioj@jcrosoft.com *
* *
+ * Copyright (C) 2015 by Marc Schink *
+ * openocd-dev@marcschink.de *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
+#include <stdint.h>
+#include <math.h>
+
#include <jtag/interface.h>
#include <jtag/swd.h>
#include <jtag/commands.h>
-#include "libusb_common.h"
-/* See Segger's public documentation:
- * Reference manual for J-Link USB Protocol
- * Document RM08001-R6 Date: June 16, 2009
- * (Or newer, with some SWD information).
- * http://www.segger.com/cms/admin/uploads/productDocs/RM08001_JLinkUSBProtocol.pdf
- */
+#include <libjaylink/libjaylink.h>
-/*
- * The default pid of the segger is 0x0101
- * But when you change the USB Address it will also
- *
- * pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address)
- */
+static struct jaylink_context *jayctx;
+static struct jaylink_device_handle *devh;
+static struct jaylink_connection conn;
+static struct jaylink_connection connlist[JAYLINK_MAX_CONNECTIONS];
+static enum jaylink_jtag_version jtag_command_version;
+static uint8_t caps[JAYLINK_DEV_EXT_CAPS_SIZE];
-#define JLINK_USB_INTERFACE_CLASS 0xff
-#define JLINK_USB_INTERFACE_SUBCLASS 0xff
-#define JLINK_USB_INTERFACE_PROTOCOL 0xff
-
-static unsigned int jlink_write_ep;
-static unsigned int jlink_read_ep;
-static unsigned int jlink_hw_jtag_version = 2;
-
-#define JLINK_USB_TIMEOUT 1000
-
-/* See Section 3.3.2 of the Segger JLink USB protocol manual */
-/* 2048 is the max value we can use here */
-#define JLINK_TAP_BUFFER_SIZE 2048
-/*#define JLINK_TAP_BUFFER_SIZE 256*/
-/*#define JLINK_TAP_BUFFER_SIZE 384*/
-
-#define JLINK_IN_BUFFER_SIZE (2048 + 1)
-#define JLINK_OUT_BUFFER_SIZE (2*2048 + 4)
-
-/* Global USB buffers */
-static uint8_t usb_in_buffer[JLINK_IN_BUFFER_SIZE];
-static uint8_t usb_out_buffer[JLINK_OUT_BUFFER_SIZE];
-
-/* Constants for JLink command */
-#define EMU_CMD_VERSION 0x01
-#define EMU_CMD_RESET_TRST 0x02
-#define EMU_CMD_RESET_TARGET 0x03
-#define EMU_CMD_SET_SPEED 0x05
-#define EMU_CMD_GET_STATE 0x07
-#define EMU_CMD_SET_KS_POWER 0x08
-#define EMU_CMD_REGISTER 0x09
-#define EMU_CMD_GET_SPEEDS 0xc0
-#define EMU_CMD_GET_HW_INFO 0xc1
-#define EMU_CMD_GET_COUNTERS 0xc2
-#define EMU_CMD_SELECT_IF 0xc7
-#define EMU_CMD_HW_CLOCK 0xc8
-#define EMU_CMD_HW_TMS0 0xc9
-#define EMU_CMD_HW_TMS1 0xca
-#define EMU_CMD_HW_DATA0 0xcb
-#define EMU_CMD_HW_DATA1 0xcc
-#define EMU_CMD_HW_JTAG 0xcd
-#define EMU_CMD_HW_JTAG2 0xce
-#define EMU_CMD_HW_JTAG3 0xcf
-#define EMU_CMD_HW_RELEASE_RESET_STOP_EX 0xd0
-#define EMU_CMD_HW_RELEASE_RESET_STOP_TIMED 0xd1
-#define EMU_CMD_GET_MAX_MEM_BLOCK 0xd4
-#define EMU_CMD_HW_JTAG_WRITE 0xd5
-#define EMU_CMD_HW_JTAG_GET_RESULT 0xd6
-#define EMU_CMD_HW_RESET0 0xdc
-#define EMU_CMD_HW_RESET1 0xdd
-#define EMU_CMD_HW_TRST0 0xde
-#define EMU_CMD_HW_TRST1 0xdf
-#define EMU_CMD_GET_CAPS 0xe8
-#define EMU_CMD_GET_CPU_CAPS 0xe9
-#define EMU_CMD_EXEC_CPU_CMD 0xea
-#define EMU_CMD_GET_CAPS_EX 0xed
-#define EMU_CMD_GET_HW_VERSION 0xf0
-#define EMU_CMD_WRITE_DCC 0xf1
-#define EMU_CMD_READ_CONFIG 0xf2
-#define EMU_CMD_WRITE_CONFIG 0xf3
-#define EMU_CMD_WRITE_MEM 0xf4
-#define EMU_CMD_READ_MEM 0xf5
-#define EMU_CMD_MEASURE_RTCK_REACT 0xf6
-#define EMU_CMD_WRITE_MEM_ARM79 0xf7
-#define EMU_CMD_READ_MEM_ARM79 0xf8
-
-/* Register subcommands */
-#define REG_CMD_REGISTER 100
-#define REG_CMD_UNREGISTER 101
-
-/* bits return from EMU_CMD_GET_CAPS */
-#define EMU_CAP_RESERVED_1 0
-#define EMU_CAP_GET_HW_VERSION 1
-#define EMU_CAP_WRITE_DCC 2
-#define EMU_CAP_ADAPTIVE_CLOCKING 3
-#define EMU_CAP_READ_CONFIG 4
-#define EMU_CAP_WRITE_CONFIG 5
-#define EMU_CAP_TRACE 6
-#define EMU_CAP_WRITE_MEM 7
-#define EMU_CAP_READ_MEM 8
-#define EMU_CAP_SPEED_INFO 9
-#define EMU_CAP_EXEC_CODE 10
-#define EMU_CAP_GET_MAX_BLOCK_SIZE 11
-#define EMU_CAP_GET_HW_INFO 12
-#define EMU_CAP_SET_KS_POWER 13
-#define EMU_CAP_RESET_STOP_TIMED 14
-#define EMU_CAP_RESERVED_2 15
-#define EMU_CAP_MEASURE_RTCK_REACT 16
-#define EMU_CAP_SELECT_IF 17
-#define EMU_CAP_RW_MEM_ARM79 18
-#define EMU_CAP_GET_COUNTERS 19
-#define EMU_CAP_READ_DCC 20
-#define EMU_CAP_GET_CPU_CAPS 21
-#define EMU_CAP_EXEC_CPU_CMD 22
-#define EMU_CAP_SWO 23
-#define EMU_CAP_WRITE_DCC_EX 24
-#define EMU_CAP_UPDATE_FIRMWARE_EX 25
-#define EMU_CAP_FILE_IO 26
-#define EMU_CAP_REGISTER 27
-#define EMU_CAP_INDICATORS 28
-#define EMU_CAP_TEST_NET_SPEED 29
-#define EMU_CAP_RAWTRACE 30
-#define EMU_CAP_RESERVED_3 31
-
-static const char * const jlink_cap_str[] = {
- "Always 1.",
- "Supports command EMU_CMD_GET_HARDWARE_VERSION",
- "Supports command EMU_CMD_WRITE_DCC",
- "Supports adaptive clocking",
- "Supports command EMU_CMD_READ_CONFIG",
- "Supports command EMU_CMD_WRITE_CONFIG",
- "Supports trace commands",
- "Supports command EMU_CMD_WRITE_MEM",
- "Supports command EMU_CMD_READ_MEM",
- "Supports command EMU_CMD_GET_SPEED",
- "Supports command EMU_CMD_CODE_...",
- "Supports command EMU_CMD_GET_MAX_BLOCK_SIZE",
- "Supports command EMU_CMD_GET_HW_INFO",
- "Supports command EMU_CMD_SET_KS_POWER",
- "Supports command EMU_CMD_HW_RELEASE_RESET_STOP_TIMED",
- "Reserved",
- "Supports command EMU_CMD_MEASURE_RTCK_REACT",
- "Supports command EMU_CMD_HW_SELECT_IF",
- "Supports command EMU_CMD_READ/WRITE_MEM_ARM79",
- "Supports command EMU_CMD_GET_COUNTERS",
- "Supports command EMU_CMD_READ_DCC",
- "Supports command EMU_CMD_GET_CPU_CAPS",
- "Supports command EMU_CMD_EXEC_CPU_CMD",
- "Supports command EMU_CMD_SWO",
- "Supports command EMU_CMD_WRITE_DCC_EX",
- "Supports command EMU_CMD_UPDATE_FIRMWARE_EX",
- "Supports command EMU_CMD_FILE_IO",
- "Supports command EMU_CMD_REGISTER",
- "Supports command EMU_CMD_INDICATORS",
- "Supports command EMU_CMD_TEST_NET_SPEED",
- "Supports command EMU_CMD_RAWTRACE",
- "Reserved",
-};
+static uint32_t serial_number;
+static bool use_serial_number;
+static uint8_t usb_address;
+static bool use_usb_address;
+static uint8_t iface = JAYLINK_TIF_JTAG;
+static bool trace_enabled;
+
+#define JLINK_MAX_SPEED 12000
+#define JLINK_TAP_BUFFER_SIZE 2048
+
+static unsigned int swd_buffer_size = JLINK_TAP_BUFFER_SIZE;
+
+/* 256 byte non-volatile memory */
+struct device_config {
+ uint8_t usb_address;
+ /* 0ffset 0x01 to 0x03 */
+ uint8_t reserved_1[3];
+ uint32_t target_power;
+ /* 0ffset 0x08 to 0x1f */
+ uint8_t reserved_2[24];
+ /* IP only for J-Link Pro */
+ uint8_t ip_address[4];
+ uint8_t subnet_mask[4];
+ /* 0ffset 0x28 to 0x2f */
+ uint8_t reserved_3[8];
+ uint8_t mac_address[6];
+ /* 0ffset 0x36 to 0xff */
+ uint8_t reserved_4[202];
+} __attribute__ ((packed));
-/* max speed 12MHz v5.0 jlink */
-#define JLINK_MAX_SPEED 12000
-
-/* J-Link hardware versions */
-#define JLINK_HW_TYPE_JLINK 0
-#define JLINK_HW_TYPE_JTRACE 1
-#define JLINK_HW_TYPE_FLASHER 2
-#define JLINK_HW_TYPE_JLINK_PRO 3
-#define JLINK_HW_TYPE_JLINK_LITE_ADI 5
-#define JLINK_HW_TYPE_JLINK_LITE_XMC4000 16
-#define JLINK_HW_TYPE_JLINK_LITE_XMC4200 17
-#define JLINK_HW_TYPE_LPCLINK2 18
-
-/* Interface selection */
-#define JLINK_TIF_JTAG 0
-#define JLINK_TIF_SWD 1
-#define JLINK_SWD_DIR_IN 0
-#define JLINK_SWD_DIR_OUT 1
+static struct device_config config;
+static struct device_config tmp_config;
/* Queue command functions */
static void jlink_end_state(tap_state_t state);
static void jlink_scan(bool ir_scan, enum scan_type type, uint8_t *buffer,
int scan_size, struct scan_command *command);
static void jlink_reset(int trst, int srst);
-static void jlink_simple_command(uint8_t command);
-static int jlink_get_status(void);
static int jlink_swd_run_queue(struct adiv5_dap *dap);
-static void jlink_swd_queue_cmd(struct adiv5_dap *dap, uint8_t cmd, uint32_t *dst, uint32_t data);
-static int jlink_swd_switch_seq(struct adiv5_dap *dap, enum swd_special_seq seq);
+static void jlink_swd_queue_cmd(struct adiv5_dap *dap, uint8_t cmd,
+ uint32_t *dst, uint32_t data);
+static int jlink_swd_switch_seq(struct adiv5_dap *dap,
+ enum swd_special_seq seq);
/* J-Link tap buffer functions */
static void jlink_tap_init(void);
static void jlink_tap_append_scan(int length, uint8_t *buffer,
struct scan_command *command);
-/* Jlink lowlevel functions */
-struct jlink {
- struct jtag_libusb_device_handle *usb_handle;
-};
-
-static struct jlink *jlink_usb_open(void);
-static void jlink_usb_close(struct jlink *jlink);
-static int jlink_usb_message(struct jlink *jlink, int out_length, int in_length);
-static int jlink_usb_io(struct jlink *jlink, int out_length, int in_length);
-static int jlink_usb_write(struct jlink *jlink, int out_length);
-static int jlink_usb_read(struct jlink *jlink, int expected_size);
-
-/* helper functions */
-static int jlink_get_version_info(void);
-
-#ifdef _DEBUG_USB_COMMS_
-static void jlink_debug_buffer(uint8_t *buffer, int length);
-#else
-static inline void jlink_debug_buffer(uint8_t *buffer, int length)
-{
-}
-#endif
-
static enum tap_state jlink_last_state = TAP_RESET;
-
-static struct jlink *jlink_handle;
-
-/* pid could be specified at runtime */
-static uint16_t vids[] = { 0x1366, 0x1366, 0x1366, 0x1366, 0x1366, 0x1366, 0 };
-static uint16_t pids[] = { 0x0101, 0x0102, 0x0103, 0x0104, 0x0105, 0x1015, 0 };
-
-static char *jlink_serial;
-
-static uint32_t jlink_caps;
-static uint32_t jlink_hw_type;
-
static int queued_retval;
-static bool swd_mode;
-
-/* 256 byte non-volatile memory */
-struct jlink_config {
- uint8_t usb_address;
- /* 0ffset 0x01 to 0x03 */
- uint8_t reserved_1[3];
- uint32_t kickstart_power_on_jtag_pin_19;
- /* 0ffset 0x08 to 0x1f */
- uint8_t reserved_2[24];
- /* IP only for J-Link Pro */
- uint8_t ip_address[4];
- uint8_t subnet_mask[4];
- /* 0ffset 0x28 to 0x2f */
- uint8_t reserved_3[8];
- uint8_t mac_address[6];
- /* 0ffset 0x36 to 0xff */
- uint8_t reserved_4[202];
-} __attribute__ ((packed));
-struct jlink_config jlink_cfg;
/***************************************************************************/
/* External interface implementation */
static void jlink_execute_runtest(struct jtag_command *cmd)
{
- DEBUG_JTAG_IO("runtest %i cycles, end in %i",
- cmd->cmd.runtest->num_cycles,
- cmd->cmd.runtest->end_state);
+ DEBUG_JTAG_IO("runtest %i cycles, end in %i", cmd->cmd.runtest->num_cycles,
+ cmd->cmd.runtest->end_state);
jlink_end_state(cmd->cmd.runtest->end_state);
-
jlink_runtest(cmd->cmd.runtest->num_cycles);
}
cmd->cmd.pathmove->num_states,
cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]);
- jlink_path_move(cmd->cmd.pathmove->num_states,
- cmd->cmd.pathmove->path);
+ jlink_path_move(cmd->cmd.pathmove->num_states, cmd->cmd.pathmove->path);
}
static void jlink_execute_scan(struct jtag_command *cmd)
scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer);
DEBUG_JTAG_IO("scan input, length = %d", scan_size);
- jlink_debug_buffer(buffer, (scan_size + 7) / 8);
type = jtag_scan_type(cmd->cmd.scan);
- jlink_scan(cmd->cmd.scan->ir_scan,
- type, buffer, scan_size, cmd->cmd.scan);
+ jlink_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size, cmd->cmd.scan);
}
static void jlink_execute_reset(struct jtag_command *cmd)
{
- DEBUG_JTAG_IO("reset trst: %i srst %i",
- cmd->cmd.reset->trst, cmd->cmd.reset->srst);
+ DEBUG_JTAG_IO("reset trst: %i srst %i", cmd->cmd.reset->trst,
+ cmd->cmd.reset->srst);
jlink_tap_execute();
jlink_reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst);
jtag_sleep(cmd->cmd.sleep->us);
}
-static void jlink_execute_command(struct jtag_command *cmd)
+static int jlink_execute_command(struct jtag_command *cmd)
{
switch (cmd->type) {
case JTAG_RUNTEST:
jlink_execute_sleep(cmd);
break;
default:
- LOG_ERROR("BUG: unknown JTAG command type encountered");
- exit(-1);
+ LOG_ERROR("BUG: Unknown JTAG command type encountered.");
+ return ERROR_JTAG_QUEUE_FAILED;
}
+
+ return ERROR_OK;
}
static int jlink_execute_queue(void)
{
+ int ret;
struct jtag_command *cmd = jtag_command_queue;
while (cmd != NULL) {
- jlink_execute_command(cmd);
+ ret = jlink_execute_command(cmd);
+
+ if (ret != ERROR_OK)
+ return ret;
+
cmd = cmd->next;
}
return jlink_tap_execute();
}
-/* Sets speed in kHz. */
static int jlink_speed(int speed)
{
- int result;
+ int ret;
if (speed > JLINK_MAX_SPEED) {
- LOG_INFO("reduce speed request: %dkHz to %dkHz maximum",
- speed, JLINK_MAX_SPEED);
+ LOG_INFO("Reduce speed from %d kHz to %d kHz (maximum).", speed,
+ JLINK_MAX_SPEED);
speed = JLINK_MAX_SPEED;
}
- /* check for RTCK setting */
- if (speed == 0)
- speed = -1;
+ if (!speed) {
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_ADAPTIVE_CLOCKING)) {
+ LOG_ERROR("Adaptive clocking is not supported by the device.");
+ return ERROR_JTAG_NOT_IMPLEMENTED;
+ }
+
+ speed = JAYLINK_SPEED_ADAPTIVE_CLOCKING;
+ }
- usb_out_buffer[0] = EMU_CMD_SET_SPEED;
- usb_out_buffer[1] = (speed >> 0) & 0xff;
- usb_out_buffer[2] = (speed >> 8) & 0xff;
+ ret = jaylink_set_speed(devh, speed);
- result = jlink_usb_write(jlink_handle, 3);
- if (result != 3) {
- LOG_ERROR("J-Link setting speed failed (%d)", result);
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_set_speed() failed: %s.",
+ jaylink_strerror_name(ret));
return ERROR_JTAG_DEVICE_ERROR;
}
return ERROR_OK;
}
+static bool read_device_config(struct device_config *cfg)
+{
+ int ret;
+
+ ret = jaylink_read_raw_config(devh, (uint8_t *)cfg);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_read_raw_config() failed: %s.",
+ jaylink_strerror_name(ret));
+ return false;
+ }
+
+ if (cfg->usb_address == 0xff)
+ cfg->usb_address = 0x00;
+
+ if (cfg->target_power == 0xffffffff)
+ cfg->target_power = 0;
+
+ return true;
+}
+
+static int select_interface(void)
+{
+ int ret;
+ uint32_t interfaces;
+
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_SELECT_TIF)) {
+ if (iface != JAYLINK_TIF_JTAG) {
+ LOG_ERROR("Device supports JTAG transport only.");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+ }
+
+ ret = jaylink_get_available_interfaces(devh, &interfaces);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_get_available_interfaces() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ if (!(interfaces & (1 << iface))) {
+ LOG_ERROR("Selected transport is not supported by the device.");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ ret = jaylink_select_interface(devh, iface);
+
+ if (ret < 0) {
+ LOG_ERROR("jaylink_select_interface() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
static int jlink_register(void)
{
- int result;
- usb_out_buffer[0] = EMU_CMD_REGISTER;
- usb_out_buffer[1] = REG_CMD_REGISTER;
- /* 2 - 11 is "additional parameter",
- * 12 - 13 is connection handle, zero initially */
- memset(&usb_out_buffer[2], 0, 10 + 2);
-
- result = jlink_usb_write(jlink_handle, 14);
- if (result != 14) {
- LOG_ERROR("J-Link register write failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
+ int ret;
+ int i;
+ bool handle_found;
+
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_REGISTER))
+ return ERROR_OK;
+
+ ret = jaylink_register(devh, &conn, connlist, NULL, NULL);
+
+ if (ret < 0) {
+ LOG_ERROR("jaylink_register() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_FAIL;
}
- /* Returns:
- * 0 - 1 connection handle,
- * 2 - 3 number of information entities,
- * 4 - 5 size of a single information struct,
- * 6 - 7 number of additional bytes,
- * 8 - ... reply data
- *
- * Try to read the whole USB bulk packet
- */
- result = jtag_libusb_bulk_read(jlink_handle->usb_handle, jlink_read_ep,
- (char *)usb_in_buffer, sizeof(usb_in_buffer),
- JLINK_USB_TIMEOUT);
- if (!result) {
- LOG_ERROR("J-Link register read failed (0 bytes received)");
- return ERROR_JTAG_DEVICE_ERROR;
+ handle_found = false;
+
+ for (i = 0; i < ret; i++) {
+ if (connlist[i].handle == conn.handle) {
+ handle_found = true;
+ break;
+ }
+ }
+
+ if (!handle_found) {
+ LOG_ERROR("Registration failed: maximum number of connections on the "
+ "device reached.");
+ return ERROR_FAIL;
}
return ERROR_OK;
}
/*
- * select transport interface
- *
- * @param iface [0..31] currently: 0=JTAG, 1=SWD
- * @returns ERROR_OK or ERROR_ code
- *
- * @pre jlink_handle must be opened
- * @pre function may be called only for devices, that have
- * EMU_CAP_SELECT_IF capability enabled
+ * Adjust the SWD transaction buffer size depending on the free device internal
+ * memory. This ensures that the SWD transactions sent to the device do not
+ * exceed the internal memory of the device.
*/
-static int jlink_select_interface(int iface)
+static bool adjust_swd_buffer_size(void)
{
- /* According to Segger's document RM08001-R7 Date: October 8, 2010,
- * http://www.segger.com/admin/uploads/productDocs/RM08001_JLinkUSBProtocol.pdf
- * section 5.5.3 EMU_CMD_SELECT_IF
- * > SubCmd 1..31 to select interface (0..31)
- *
- * The table below states:
- * 0 TIF_JTAG
- * 1 TIF_SWD
- *
- * This obviosly means that to select TIF_JTAG one should write SubCmd = 1.
- *
- * In fact, JTAG interface operates when SubCmd=0
- *
- * It looks like a typo in documentation, because interfaces 0..31 could not
- * be selected by 1..31 range command.
- */
- assert(iface >= 0 && iface < 32);
- int result;
+ int ret;
+ uint32_t tmp;
- /* get available interfaces */
- usb_out_buffer[0] = EMU_CMD_SELECT_IF;
- usb_out_buffer[1] = 0xff;
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_GET_FREE_MEMORY))
+ return true;
- result = jlink_usb_io(jlink_handle, 2, 4);
- if (result != ERROR_OK) {
- LOG_ERROR("J-Link query interface failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ ret = jaylink_get_free_memory(devh, &tmp);
- uint32_t iface_mask = buf_get_u32(usb_in_buffer, 0, 32);
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_get_free_memory() failed: %s.",
+ jaylink_strerror_name(ret));
+ return false;
+ }
- if (!(iface_mask & (1<<iface))) {
- LOG_ERROR("J-Link requesting to select unsupported interface (%" PRIx32 ")", iface_mask);
- return ERROR_JTAG_DEVICE_ERROR;
+ if (tmp < 143) {
+ LOG_ERROR("Not enough free device internal memory: %u bytes.", tmp);
+ return false;
}
- /* Select interface */
- usb_out_buffer[0] = EMU_CMD_SELECT_IF;
- usb_out_buffer[1] = iface;
+ tmp = MIN(JLINK_TAP_BUFFER_SIZE, (tmp - 16) / 2);
- result = jlink_usb_io(jlink_handle, 2, 4);
- if (result != ERROR_OK) {
- LOG_ERROR("J-Link interface select failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
+ if (tmp != swd_buffer_size) {
+ swd_buffer_size = tmp;
+ LOG_DEBUG("Adjusted SWD transaction buffer size to %u bytes.",
+ swd_buffer_size);
}
- return ERROR_OK;
+ return true;
}
static int jlink_init(void)
{
- int i;
+ int ret;
+ struct jaylink_device **devs;
+ unsigned int i;
+ bool found_device;
+ uint32_t tmp;
+ char *firmware_version;
+ struct jaylink_hardware_version hwver;
+ struct jaylink_hardware_status hwstatus;
+
+ ret = jaylink_init(&jayctx);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_init() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_JTAG_INIT_FAILED;
+ }
- jlink_handle = jlink_usb_open();
+ ret = jaylink_get_device_list(jayctx, &devs);
- if (jlink_handle == 0) {
- LOG_ERROR("Cannot find jlink Interface! Please check "
- "connection and permissions.");
+ if (ret < 0) {
+ LOG_ERROR("jaylink_get_device_list() failed: %s.",
+ jaylink_strerror_name(ret));
+ jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
- jlink_hw_jtag_version = 2;
+ found_device = false;
+
+ if (!use_serial_number && !use_usb_address)
+ LOG_INFO("No device selected, using first device.");
+
+ for (i = 0; devs[i]; i++) {
+ jaylink_device_get_serial_number(devs[i], &tmp);
+ ret = jaylink_device_get_usb_address(devs[i]);
+
+ if (use_usb_address && usb_address != ret)
+ continue;
+
+ if (use_serial_number && tmp != serial_number)
+ continue;
- if (jlink_get_version_info() == ERROR_OK) {
- /* attempt to get status */
- jlink_get_status();
+ ret = jaylink_open(devs[i], &devh);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("Failed to open device: %s.", jaylink_strerror_name(ret));
+ continue;
+ }
+
+ found_device = true;
+ break;
}
- /* Registration is sometimes necessary for SWD to work */
- if (jlink_caps & (1<<EMU_CAP_REGISTER))
- jlink_register();
+ jaylink_free_device_list(devs, 1);
+
+ if (!found_device) {
+ LOG_ERROR("No J-Link device found.");
+ jaylink_exit(jayctx);
+ return ERROR_JTAG_INIT_FAILED;
+ }
/*
- * Some versions of Segger's software do not select JTAG interface by default.
- *
- * Segger recommends to select interface necessarily as a part of init process,
- * in case any previous session leaves improper interface selected.
+ * Be careful with changing the following initialization sequence because
+ * some devices are known to be sensitive regarding the order.
*/
- int retval;
- if (jlink_caps & (1<<EMU_CAP_SELECT_IF))
- retval = jlink_select_interface(swd_mode ? JLINK_TIF_SWD : JLINK_TIF_JTAG);
- else
- retval = swd_mode ? ERROR_JTAG_DEVICE_ERROR : ERROR_OK;
- if (retval != ERROR_OK) {
- LOG_ERROR("Selected transport mode is not supported.");
+ ret = jaylink_get_firmware_version(devh, &firmware_version);
+
+ if (ret > 0) {
+ LOG_INFO("%s", firmware_version);
+ free(firmware_version);
+ } else if (!ret) {
+ LOG_WARNING("Device responds empty firmware version string.");
+ } else {
+ LOG_ERROR("jaylink_get_firmware_version() failed: %s.",
+ jaylink_strerror_name(ret));
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ memset(caps, 0, JAYLINK_DEV_EXT_CAPS_SIZE);
+ ret = jaylink_get_caps(devh, caps);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_get_caps() failed: %s.", jaylink_strerror_name(ret));
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_GET_EXT_CAPS)) {
+ ret = jaylink_get_extended_caps(devh, caps);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_get_extended_caps() failed: %s.",
+ jaylink_strerror_name(ret));
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+ }
+
+ jtag_command_version = JAYLINK_JTAG_V2;
+
+ if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_GET_HW_VERSION)) {
+ ret = jaylink_get_hardware_version(devh, &hwver);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("Failed to retrieve hardware version: %s.",
+ jaylink_strerror_name(ret));
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ LOG_INFO("Hardware version: %u.%02u", hwver.major, hwver.minor);
+
+ if (hwver.major >= 5)
+ jtag_command_version = JAYLINK_JTAG_V3;
+ }
+
+ if (iface == JAYLINK_TIF_SWD) {
+ /*
+ * Adjust the SWD transaction buffer size in case there is already
+ * allocated memory on the device. This happens for example if the
+ * memory for SWO capturing is still allocated because the software
+ * which used the device before has not been shut down properly.
+ */
+ if (!adjust_swd_buffer_size()) {
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+ }
+
+ if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) {
+ if (!read_device_config(&config)) {
+ LOG_ERROR("Failed to read device configuration data.");
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ memcpy(&tmp_config, &config, sizeof(struct device_config));
+ }
+
+ ret = jaylink_get_hardware_status(devh, &hwstatus);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_get_hardware_status() failed: %s.",
+ jaylink_strerror_name(ret));
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
- LOG_INFO("J-Link JTAG Interface ready");
+ LOG_INFO("VTarget = %u.%03u V", hwstatus.target_voltage / 1000,
+ hwstatus.target_voltage % 1000);
+
+ conn.handle = 0;
+ conn.pid = 0;
+ conn.hid = 0;
+ conn.iid = 0;
+ conn.cid = 0;
+
+ ret = jlink_register();
+
+ if (ret != ERROR_OK) {
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ ret = select_interface();
+
+ if (ret != ERROR_OK) {
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+ return ret;
+ }
jlink_reset(0, 0);
jtag_sleep(3000);
jlink_speed(jtag_get_speed_khz());
- if (!swd_mode) {
- /* v5/6 jlink seems to have an issue if the first tap move
- * is not divisible by 8, so we send a TLR on first power up */
+ if (iface == JAYLINK_TIF_JTAG) {
+ /*
+ * J-Link devices with firmware version v5 and v6 seems to have an issue
+ * if the first tap move is not divisible by 8, so we send a TLR on
+ * first power up.
+ */
for (i = 0; i < 8; i++)
jlink_tap_append_step(1, 0);
+
jlink_tap_execute();
}
static int jlink_quit(void)
{
- jlink_usb_close(jlink_handle);
+ int ret;
+
+ if (trace_enabled) {
+ ret = jaylink_swo_stop(devh);
+
+ if (ret != JAYLINK_OK)
+ LOG_ERROR("jaylink_swo_stop() failed: %s.",
+ jaylink_strerror_name(ret));
+ }
+
+ if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_REGISTER)) {
+ ret = jaylink_unregister(devh, &conn, connlist, NULL, NULL);
+
+ if (ret < 0)
+ LOG_ERROR("jaylink_unregister() failed: %s.",
+ jaylink_strerror_name(ret));
+ }
+
+ jaylink_close(devh);
+ jaylink_exit(jayctx);
+
return ERROR_OK;
}
{
int i;
int tms = 0;
- uint8_t tms_scan = tap_get_tms_path(tap_get_state(), tap_get_end_state());
- uint8_t tms_scan_bits = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
+ uint8_t tms_scan;
+ uint8_t tms_scan_bits;
+
+ tms_scan = tap_get_tms_path(tap_get_state(), tap_get_end_state());
+ tms_scan_bits = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
for (i = 0; i < tms_scan_bits; i++) {
tms = (tms_scan >> i) & 1;
else if (path[i] == tap_state_transition(tap_get_state(), true))
jlink_tap_append_step(1, 0);
else {
- LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
- tap_state_name(tap_get_state()), tap_state_name(path[i]));
+ LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition.",
+ tap_state_name(tap_get_state()), tap_state_name(path[i]));
exit(-1);
}
jlink_tap_ensure_space(1, num_cycles + 16);
- /* only do a state_move when we're not already in IDLE */
+ /* Only do a state_move when we're not already in IDLE. */
if (tap_get_state() != TAP_IDLE) {
jlink_end_state(TAP_IDLE);
jlink_state_move();
/* num_cycles--; */
}
- /* execute num_cycles */
+ /* Execute num_cycles. */
for (i = 0; i < num_cycles; i++)
jlink_tap_append_step(0, 0);
- /* finish in end_state */
+ /* Finish in end_state. */
jlink_end_state(saved_end_state);
+
if (tap_get_state() != tap_get_end_state())
jlink_state_move();
}
saved_end_state = tap_get_end_state();
- /* Move to appropriate scan state */
+ /* Move to appropriate scan state. */
jlink_end_state(ir_scan ? TAP_IRSHIFT : TAP_DRSHIFT);
- /* Only move if we're not already there */
+ /* Only move if we're not already there. */
if (tap_get_state() != tap_get_end_state())
jlink_state_move();
jlink_end_state(saved_end_state);
- /* Scan */
+ /* Scan. */
jlink_tap_append_scan(scan_size, buffer, command);
- /* We are in Exit1, go to Pause */
+ /* We are in Exit1, go to Pause. */
jlink_tap_append_step(0, 0);
tap_set_state(ir_scan ? TAP_IRPAUSE : TAP_DRPAUSE);
static void jlink_reset(int trst, int srst)
{
- LOG_DEBUG("trst: %i, srst: %i", trst, srst);
+ LOG_DEBUG("TRST: %i, SRST: %i.", trst, srst);
- /* Signals are active low */
+ /* Signals are active low. */
if (srst == 0)
- jlink_simple_command(EMU_CMD_HW_RESET1);
+ jaylink_set_reset(devh);
if (srst == 1)
- jlink_simple_command(EMU_CMD_HW_RESET0);
+ jaylink_clear_reset(devh);
if (trst == 1)
- jlink_simple_command(EMU_CMD_HW_TRST0);
+ jaylink_jtag_clear_trst(devh);
if (trst == 0)
- jlink_simple_command(EMU_CMD_HW_TRST1);
+ jaylink_jtag_set_trst(devh);
}
-static void jlink_simple_command(uint8_t command)
+COMMAND_HANDLER(jlink_usb_command)
{
- int result;
+ if (CMD_ARGC != 1) {
+ command_print(CMD_CTX, "Need exactly one argument for jlink usb.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
- DEBUG_JTAG_IO("0x%02x", command);
+ if (sscanf(CMD_ARGV[0], "%" SCNd8, &usb_address) != 1) {
+ command_print(CMD_CTX, "Invalid USB address: %s.", CMD_ARGV[0]);
+ return ERROR_FAIL;
+ }
- usb_out_buffer[0] = command;
- result = jlink_usb_write(jlink_handle, 1);
+ if (usb_address > JAYLINK_USB_ADDRESS_3) {
+ command_print(CMD_CTX, "Invalid USB address: %s.", CMD_ARGV[0]);
+ return ERROR_FAIL;
+ }
+
+ use_serial_number = false;
+ use_usb_address = true;
- if (result != 1)
- LOG_ERROR("J-Link command 0x%02x failed (%d)", command, result);
+ return ERROR_OK;
}
-static int jlink_get_status(void)
+COMMAND_HANDLER(jlink_serial_command)
{
- int result;
+ if (CMD_ARGC != 1) {
+ command_print(CMD_CTX, "Need exactly one argument for jlink serial.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (sscanf(CMD_ARGV[0], "%" SCNd32, &serial_number) != 1) {
+ command_print(CMD_CTX, "Invalid serial number: %s.", CMD_ARGV[0]);
+ return ERROR_FAIL;
+ }
- jlink_simple_command(EMU_CMD_GET_STATE);
+ use_serial_number = true;
+ use_usb_address = false;
- result = jlink_usb_read(jlink_handle, 8);
- if (result != 8) {
- LOG_ERROR("J-Link command EMU_CMD_GET_STATE failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(jlink_handle_hwstatus_command)
+{
+ int ret;
+ struct jaylink_hardware_status status;
+
+ ret = jaylink_get_hardware_status(devh, &status);
+
+ if (ret != JAYLINK_OK) {
+ command_print(CMD_CTX, "jaylink_get_hardware_status() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_FAIL;
}
- int vref = usb_in_buffer[0] + (usb_in_buffer[1] << 8);
- LOG_INFO("Vref = %d.%d TCK = %d TDI = %d TDO = %d TMS = %d SRST = %d TRST = %d", \
- vref / 1000, vref % 1000, \
- usb_in_buffer[2], usb_in_buffer[3], usb_in_buffer[4], \
- usb_in_buffer[5], usb_in_buffer[6], usb_in_buffer[7]);
+ command_print(CMD_CTX, "VTarget = %u.%03u V",
+ status.target_voltage / 1000, status.target_voltage % 1000);
+
+ command_print(CMD_CTX, "TCK = %u TDI = %u TDO = %u TMS = %u SRST = %u "
+ "TRST = %u", status.tck, status.tdi, status.tdo, status.tms,
+ status.tres, status.trst);
- if (vref < 1500)
- LOG_ERROR("Vref too low. Check Target Power");
+ if (status.target_voltage < 1500)
+ command_print(CMD_CTX, "Target voltage too low. Check target power.");
return ERROR_OK;
}
-#define jlink_dump_printf(context, expr ...) \
- do { \
- if (context) \
- command_print(context, expr); \
- else \
- LOG_INFO(expr); \
- } while (0);
-
-static void jlink_caps_dump(struct command_context *ctx)
+COMMAND_HANDLER(jlink_handle_free_memory_command)
{
- int i;
+ int ret;
+ uint32_t tmp;
- jlink_dump_printf(ctx, "J-Link Capabilities");
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_GET_FREE_MEMORY)) {
+ command_print(CMD_CTX, "Retrieval of free memory is not supported by "
+ "the device.");
+ return ERROR_OK;
+ }
- for (i = 1; i < 31; i++)
- if (jlink_caps & (1 << i))
- jlink_dump_printf(ctx, "%s", jlink_cap_str[i]);
+ ret = jaylink_get_free_memory(devh, &tmp);
+
+ if (ret != JAYLINK_OK) {
+ command_print(CMD_CTX, "jaylink_get_free_memory() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_FAIL;
+ }
+
+ command_print(CMD_CTX, "Device has %u bytes of free memory.", tmp);
+
+ return ERROR_OK;
}
-static void jlink_config_usb_address_dump(struct command_context *ctx, struct jlink_config *cfg)
+COMMAND_HANDLER(jlink_handle_jlink_jtag_command)
{
- if (!cfg)
- return;
+ int tmp;
+ int version;
- jlink_dump_printf(ctx, "USB-Address: 0x%x", cfg->usb_address);
+ if (!CMD_ARGC) {
+ switch (jtag_command_version) {
+ case JAYLINK_JTAG_V2:
+ version = 2;
+ break;
+ case JAYLINK_JTAG_V3:
+ version = 3;
+ break;
+ default:
+ return ERROR_FAIL;
+ }
+
+ command_print(CMD_CTX, "JTAG command version: %i", version);
+ } else if (CMD_ARGC == 1) {
+ if (sscanf(CMD_ARGV[0], "%i", &tmp) != 1) {
+ command_print(CMD_CTX, "Invalid argument: %s.", CMD_ARGV[0]);
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ switch (tmp) {
+ case 2:
+ jtag_command_version = JAYLINK_JTAG_V2;
+ break;
+ case 3:
+ jtag_command_version = JAYLINK_JTAG_V3;
+ break;
+ default:
+ command_print(CMD_CTX, "Invalid argument: %s.", CMD_ARGV[0]);
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ } else {
+ command_print(CMD_CTX, "Need exactly one argument for jlink jtag.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ return ERROR_OK;
}
-static void jlink_config_kickstart_dump(struct command_context *ctx, struct jlink_config *cfg)
+COMMAND_HANDLER(jlink_handle_target_power_command)
{
- if (!cfg)
- return;
+ int ret;
+ int enable;
+
+ if (CMD_ARGC != 1) {
+ command_print(CMD_CTX, "Need exactly one argument for jlink "
+ "targetpower.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
- jlink_dump_printf(ctx, "Kickstart power on JTAG-pin 19: 0x%" PRIx32,
- cfg->kickstart_power_on_jtag_pin_19);
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_SET_TARGET_POWER)) {
+ command_print(CMD_CTX, "Target power supply is not supported by the "
+ "device.");
+ return ERROR_OK;
+ }
+
+ if (!strcmp(CMD_ARGV[0], "on")) {
+ enable = true;
+ } else if (!strcmp(CMD_ARGV[0], "off")) {
+ enable = false;
+ } else {
+ command_print(CMD_CTX, "Invalid argument: %s.", CMD_ARGV[0]);
+ return ERROR_FAIL;
+ }
+
+ ret = jaylink_set_target_power(devh, enable);
+
+ if (ret != JAYLINK_OK) {
+ command_print(CMD_CTX, "jaylink_set_target_power() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
}
-static void jlink_config_mac_address_dump(struct command_context *ctx, struct jlink_config *cfg)
+static void show_config_usb_address(struct command_context *ctx)
{
- if (!cfg)
- return;
+ if (config.usb_address != tmp_config.usb_address)
+ command_print(ctx, "USB address: %u [%u]", config.usb_address,
+ tmp_config.usb_address);
+ else
+ command_print(ctx, "USB address: %u", config.usb_address);
+}
- jlink_dump_printf(ctx, "MAC Address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x",
- cfg->mac_address[5], cfg->mac_address[4],
- cfg->mac_address[3], cfg->mac_address[2],
- cfg->mac_address[1], cfg->mac_address[0]);
+static void show_config_ip_address(struct command_context *ctx)
+{
+ if (!memcmp(config.ip_address, tmp_config.ip_address, 4))
+ command_print(ctx, "IP address: %d.%d.%d.%d",
+ config.ip_address[3], config.ip_address[2],
+ config.ip_address[1], config.ip_address[0]);
+ else
+ command_print(ctx, "IP address: %d.%d.%d.%d [%d.%d.%d.%d]",
+ config.ip_address[3], config.ip_address[2],
+ config.ip_address[1], config.ip_address[0],
+ tmp_config.ip_address[3], tmp_config.ip_address[2],
+ tmp_config.ip_address[1], tmp_config.ip_address[0]);
+
+ if (!memcmp(config.subnet_mask, tmp_config.subnet_mask, 4))
+ command_print(ctx, "Subnet mask: %d.%d.%d.%d",
+ config.subnet_mask[3], config.subnet_mask[2],
+ config.subnet_mask[1], config.subnet_mask[0]);
+ else
+ command_print(ctx, "Subnet mask: %d.%d.%d.%d [%d.%d.%d.%d]",
+ config.subnet_mask[3], config.subnet_mask[2],
+ config.subnet_mask[1], config.subnet_mask[0],
+ tmp_config.subnet_mask[3], tmp_config.subnet_mask[2],
+ tmp_config.subnet_mask[1], tmp_config.subnet_mask[0]);
}
-static void jlink_config_ip_dump(struct command_context *ctx, struct jlink_config *cfg)
+static void show_config_mac_address(struct command_context *ctx)
{
- if (!cfg)
- return;
+ if (!memcmp(config.mac_address, tmp_config.mac_address, 6))
+ command_print(ctx, "MAC address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x",
+ config.mac_address[5], config.mac_address[4],
+ config.mac_address[3], config.mac_address[2],
+ config.mac_address[1], config.mac_address[0]);
+ else
+ command_print(ctx, "MAC address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x "
+ "[%.02x:%.02x:%.02x:%.02x:%.02x:%.02x]",
+ config.mac_address[5], config.mac_address[4],
+ config.mac_address[3], config.mac_address[2],
+ config.mac_address[1], config.mac_address[0],
+ tmp_config.mac_address[5], tmp_config.mac_address[4],
+ tmp_config.mac_address[3], tmp_config.mac_address[2],
+ tmp_config.mac_address[1], tmp_config.mac_address[0]);
+}
- jlink_dump_printf(ctx, "IP Address: %d.%d.%d.%d",
- cfg->ip_address[3], cfg->ip_address[2],
- cfg->ip_address[1], cfg->ip_address[0]);
- jlink_dump_printf(ctx, "Subnet Mask: %d.%d.%d.%d",
- cfg->subnet_mask[3], cfg->subnet_mask[2],
- cfg->subnet_mask[1], cfg->subnet_mask[0]);
+static void show_config_target_power(struct command_context *ctx)
+{
+ const char *target_power;
+ const char *current_target_power;
+
+ if (!config.target_power)
+ target_power = "off";
+ else
+ target_power = "on";
+
+ if (!tmp_config.target_power)
+ current_target_power = "off";
+ else
+ current_target_power = "on";
+
+ if (config.target_power != tmp_config.target_power)
+ command_print(ctx, "Target power supply: %s [%s]", target_power,
+ current_target_power);
+ else
+ command_print(ctx, "Target power supply: %s", target_power);
}
-static void jlink_config_dump(struct command_context *ctx, struct jlink_config *cfg)
+static void show_config(struct command_context *ctx)
{
- if (!cfg)
- return;
+ command_print(ctx, "J-Link device configuration:");
- jlink_dump_printf(ctx, "J-Link configuration");
- jlink_config_usb_address_dump(ctx, cfg);
- jlink_config_kickstart_dump(ctx, cfg);
+ show_config_usb_address(ctx);
- if (jlink_hw_type == JLINK_HW_TYPE_JLINK_PRO) {
- jlink_config_ip_dump(ctx, cfg);
- jlink_config_mac_address_dump(ctx, cfg);
+ if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_SET_TARGET_POWER))
+ show_config_target_power(ctx);
+
+ if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_ETHERNET)) {
+ show_config_ip_address(ctx);
+ show_config_mac_address(ctx);
}
}
-static int jlink_get_config(struct jlink_config *cfg)
+static int poll_trace(uint8_t *buf, size_t *size)
{
- int result;
- int size = sizeof(struct jlink_config);
+ int ret;
+ uint32_t length;
- usb_out_buffer[0] = EMU_CMD_READ_CONFIG;
- result = jlink_usb_io(jlink_handle, 1, size);
+ length = *size;
- if (result != ERROR_OK) {
- LOG_ERROR("jlink_usb_read failed (requested=%d, result=%d)", size, result);
+ ret = jaylink_swo_read(devh, buf, &length);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_swo_read() failed: %s.", jaylink_strerror_name(ret));
return ERROR_FAIL;
}
- memcpy(cfg, usb_in_buffer, size);
+ *size = length;
+
return ERROR_OK;
}
-static int jlink_set_config(struct jlink_config *cfg)
+static uint32_t calculate_trace_buffer_size(void)
{
- int result;
- int size = sizeof(struct jlink_config);
+ int ret;
+ uint32_t tmp;
- jlink_simple_command(EMU_CMD_WRITE_CONFIG);
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_GET_FREE_MEMORY))
+ return 0;
- memcpy(usb_out_buffer, cfg, size);
+ ret = jaylink_get_free_memory(devh, &tmp);
- result = jlink_usb_write(jlink_handle, size);
- if (result != size) {
- LOG_ERROR("jlink_usb_write failed (requested=%d, result=%d)", 256, result);
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_get_free_memory() failed: %s.",
+ jaylink_strerror_name(ret));
return ERROR_FAIL;
}
- return ERROR_OK;
-}
-
-/*
- * List of unsupported version string markers.
- *
- * The firmware versions does not correspond directly with
- * "Software and documentation pack for Windows", it may be
- * distinguished by the "compile" date in the information string.
- *
- * For example, version string is:
- * "J-Link ARM V8 compiled May 3 2012 18:36:22"
- * Marker sould be:
- * "May 3 2012"
- *
- * The list must be terminated by NULL string.
- */
-static const char * const unsupported_versions[] = {
- "Jan 31 2011",
- "JAN 31 2011",
- NULL /* End of list */
-};
+ if (tmp > 0x3fff || tmp <= 0x600)
+ tmp = tmp >> 1;
+ else
+ tmp = tmp - 0x400;
-static void jlink_check_supported(const char *str)
-{
- const char * const *p = unsupported_versions;
- while (*p) {
- if (NULL != strstr(str, *p)) {
- LOG_WARNING(
- "Unsupported J-Link firmware version.\n"
- " Please check http://www.segger.com/j-link-older-versions.html for updates");
- return;
- }
- p++;
- }
+ return tmp & 0xffffff00;
}
-static int jlink_get_version_info(void)
+static bool check_trace_freq(uint32_t freq, uint32_t div, uint32_t trace_freq)
{
- int result;
- int len;
- uint32_t jlink_max_size;
+ double min;
+ double deviation;
- /* query hardware version */
- jlink_simple_command(EMU_CMD_VERSION);
+ min = fabs(1.0 - (freq / ((double)trace_freq * div)));
- result = jlink_usb_read(jlink_handle, 2);
- if (2 != result) {
- LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ while (freq / div > 0) {
+ deviation = fabs(1.0 - (freq / ((double)trace_freq * div)));
- len = buf_get_u32(usb_in_buffer, 0, 16);
- if (len > JLINK_IN_BUFFER_SIZE) {
- LOG_ERROR("J-Link command EMU_CMD_VERSION impossible return length 0x%0x", len);
- len = JLINK_IN_BUFFER_SIZE;
- }
-
- result = jlink_usb_read(jlink_handle, len);
- if (result != len) {
- LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- usb_in_buffer[result] = 0;
- LOG_INFO("%s", (char *)usb_in_buffer);
- jlink_check_supported((char *)usb_in_buffer);
+ if (deviation < 0.03) {
+ LOG_DEBUG("Found suitable frequency divider %u with deviation of "
+ "%.02f %%.", div, deviation);
+ return true;
+ }
- /* query hardware capabilities */
- jlink_simple_command(EMU_CMD_GET_CAPS);
+ if (deviation < min)
+ min = deviation;
- result = jlink_usb_read(jlink_handle, 4);
- if (4 != result) {
- LOG_ERROR("J-Link command EMU_CMD_GET_CAPS failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
+ div++;
}
- jlink_caps = buf_get_u32(usb_in_buffer, 0, 32);
- LOG_INFO("J-Link caps 0x%x", (unsigned)jlink_caps);
-
- if (jlink_caps & (1 << EMU_CAP_GET_HW_VERSION)) {
- /* query hardware version */
- jlink_simple_command(EMU_CMD_GET_HW_VERSION);
+ LOG_ERROR("Selected trace frequency is not supported by the device. "
+ "Please choose a different trace frequency.");
+ LOG_ERROR("Maximum permitted deviation is 3.00 %%, but only %.02f %% "
+ "could be achieved.", min * 100);
- result = jlink_usb_read(jlink_handle, 4);
- if (4 != result) {
- LOG_ERROR("J-Link command EMU_CMD_GET_HW_VERSION failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ return false;
+}
- uint32_t jlink_hw_version = buf_get_u32(usb_in_buffer, 0, 32);
- uint32_t major_revision = (jlink_hw_version / 10000) % 100;
- jlink_hw_type = (jlink_hw_version / 1000000) % 100;
- if (major_revision >= 5)
- jlink_hw_jtag_version = 3;
+static int config_trace(bool enabled, enum tpio_pin_protocol pin_protocol,
+ uint32_t port_size, unsigned int *trace_freq)
+{
+ int ret;
+ uint32_t buffer_size;
+ uint32_t freq;
+ uint32_t div;
- LOG_INFO("J-Link hw version %i", (int)jlink_hw_version);
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_SWO)) {
+ LOG_ERROR("Trace capturing is not supported by the device.");
+ return ERROR_FAIL;
+ }
- switch (jlink_hw_type) {
- case JLINK_HW_TYPE_JLINK:
- LOG_INFO("J-Link hw type J-Link");
- break;
- case JLINK_HW_TYPE_JTRACE:
- LOG_INFO("J-Link hw type J-Trace");
- break;
- case JLINK_HW_TYPE_FLASHER:
- LOG_INFO("J-Link hw type Flasher");
- break;
- case JLINK_HW_TYPE_JLINK_PRO:
- LOG_INFO("J-Link hw type J-Link Pro");
- break;
- case JLINK_HW_TYPE_JLINK_LITE_ADI:
- LOG_INFO("J-Link hw type J-Link Lite-ADI");
- break;
- case JLINK_HW_TYPE_JLINK_LITE_XMC4000:
- LOG_INFO("J-Link hw type J-Link Lite-XMC4000");
- break;
- case JLINK_HW_TYPE_JLINK_LITE_XMC4200:
- LOG_INFO("J-Link hw type J-Link Lite-XMC4200");
- break;
- case JLINK_HW_TYPE_LPCLINK2:
- LOG_INFO("J-Link hw type J-Link on LPC-Link2");
- break;
- default:
- LOG_INFO("J-Link hw type unknown 0x%" PRIx32, jlink_hw_type);
- break;
- }
+ if (pin_protocol != ASYNC_UART) {
+ LOG_ERROR("Selected pin protocol is not supported.");
+ return ERROR_FAIL;
}
- if (jlink_caps & (1 << EMU_CAP_GET_MAX_BLOCK_SIZE)) {
- /* query hardware maximum memory block */
- jlink_simple_command(EMU_CMD_GET_MAX_MEM_BLOCK);
+ trace_enabled = enabled;
- result = jlink_usb_read(jlink_handle, 4);
- if (4 != result) {
- LOG_ERROR("J-Link command EMU_CMD_GET_MAX_MEM_BLOCK failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ ret = jaylink_swo_stop(devh);
- jlink_max_size = buf_get_u32(usb_in_buffer, 0, 32);
- LOG_INFO("J-Link max mem block %i", (int)jlink_max_size);
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_swo_stop() failed: %s.", jaylink_strerror_name(ret));
+ return ERROR_FAIL;
}
- if (jlink_caps & (1 << EMU_CAP_READ_CONFIG)) {
- if (jlink_get_config(&jlink_cfg) != ERROR_OK)
- return ERROR_JTAG_DEVICE_ERROR;
+ if (!enabled) {
+ /*
+ * Adjust the SWD transaction buffer size as stopping SWO capturing
+ * deallocates device internal memory.
+ */
+ if (!adjust_swd_buffer_size())
+ return ERROR_FAIL;
- jlink_config_dump(NULL, &jlink_cfg);
+ return ERROR_OK;
}
- return ERROR_OK;
-}
+ buffer_size = calculate_trace_buffer_size();
-COMMAND_HANDLER(jlink_pid_command)
-{
- if (CMD_ARGC != 1) {
- LOG_ERROR("Need exactly one argument to jlink_pid");
+ if (!buffer_size) {
+ LOG_ERROR("Not enough free device memory to start trace capturing.");
+ return ERROR_FAIL;
+ }
+
+ ret = jaylink_swo_get_speeds(devh, JAYLINK_SWO_MODE_UART, &freq, &div);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_swo_get_speeds() failed: %s.",
+ jaylink_strerror_name(ret));
return ERROR_FAIL;
}
- pids[0] = strtoul(CMD_ARGV[0], NULL, 16);
- pids[1] = 0;
- vids[1] = 0;
-
- return ERROR_OK;
-}
+ if (!*trace_freq)
+ *trace_freq = freq / div;
-COMMAND_HANDLER(jlink_serial_command)
-{
- if (CMD_ARGC != 1) {
- LOG_ERROR("Need exactly one argument to jlink_serial");
+ if (!check_trace_freq(freq, div, *trace_freq))
return ERROR_FAIL;
- }
- if (jlink_serial)
- free(jlink_serial);
- jlink_serial = strdup(CMD_ARGV[0]);
- return ERROR_OK;
-}
+ LOG_DEBUG("Using %u bytes device memory for trace capturing.", buffer_size);
-COMMAND_HANDLER(jlink_handle_jlink_info_command)
-{
- if (jlink_get_version_info() == ERROR_OK) {
- /* attempt to get status */
- jlink_get_status();
+ ret = jaylink_swo_start(devh, JAYLINK_SWO_MODE_UART, *trace_freq,
+ buffer_size);
+
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_start_swo() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_FAIL;
}
+ /*
+ * Adjust the SWD transaction buffer size as starting SWO capturing
+ * allocates device internal memory.
+ */
+ if (!adjust_swd_buffer_size())
+ return ERROR_FAIL;
+
return ERROR_OK;
}
-COMMAND_HANDLER(jlink_handle_jlink_caps_command)
+COMMAND_HANDLER(jlink_handle_config_usb_address_command)
{
- jlink_caps_dump(CMD_CTX);
+ uint8_t tmp;
- return ERROR_OK;
-}
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) {
+ command_print(CMD_CTX, "Reading configuration is not supported by the "
+ "device.");
+ return ERROR_OK;
+ }
-COMMAND_HANDLER(jlink_handle_jlink_hw_jtag_command)
-{
- switch (CMD_ARGC) {
- case 0:
- command_print(CMD_CTX, "J-Link hw jtag %i", jlink_hw_jtag_version);
- break;
- case 1: {
- int request_version = atoi(CMD_ARGV[0]);
- switch (request_version) {
- case 2:
- case 3:
- jlink_hw_jtag_version = request_version;
- break;
- default:
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
- break;
+ if (!CMD_ARGC) {
+ show_config_usb_address(CMD_CTX);
+ } else if (CMD_ARGC == 1) {
+ if (sscanf(CMD_ARGV[0], "%" SCNd8, &tmp) != 1) {
+ command_print(CMD_CTX, "Invalid USB address: %s.", CMD_ARGV[0]);
+ return ERROR_FAIL;
}
- default:
- return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (tmp > JAYLINK_USB_ADDRESS_3) {
+ command_print(CMD_CTX, "Invalid USB address: %u.", tmp);
+ return ERROR_FAIL;
+ }
+
+ tmp_config.usb_address = tmp;
+ } else {
+ command_print(CMD_CTX, "Need exactly one argument for jlink config "
+ "usb.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
return ERROR_OK;
}
-COMMAND_HANDLER(jlink_handle_jlink_kickstart_command)
+COMMAND_HANDLER(jlink_handle_config_target_power_command)
{
- uint32_t kickstart;
+ int enable;
- if (CMD_ARGC < 1) {
- jlink_config_kickstart_dump(CMD_CTX, &jlink_cfg);
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) {
+ command_print(CMD_CTX, "Reading configuration is not supported by the "
+ "device.");
return ERROR_OK;
}
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], kickstart);
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_SET_TARGET_POWER)) {
+ command_print(CMD_CTX, "Target power supply is not supported by the "
+ "device.");
+ return ERROR_OK;
+ }
+
+ if (!CMD_ARGC) {
+ show_config_target_power(CMD_CTX);
+ } else if (CMD_ARGC == 1) {
+ if (!strcmp(CMD_ARGV[0], "on")) {
+ enable = true;
+ } else if (!strcmp(CMD_ARGV[0], "off")) {
+ enable = false;
+ } else {
+ command_print(CMD_CTX, "Invalid argument: %s.", CMD_ARGV[0]);
+ return ERROR_FAIL;
+ }
+
+ tmp_config.target_power = enable;
+ } else {
+ command_print(CMD_CTX, "Need exactly one argument for jlink config "
+ "targetpower.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
- jlink_cfg.kickstart_power_on_jtag_pin_19 = kickstart;
return ERROR_OK;
}
-COMMAND_HANDLER(jlink_handle_jlink_mac_address_command)
+COMMAND_HANDLER(jlink_handle_config_mac_address_command)
{
uint8_t addr[6];
int i;
char *e;
const char *str;
- if (CMD_ARGC < 1) {
- jlink_config_mac_address_dump(CMD_CTX, &jlink_cfg);
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) {
+ command_print(CMD_CTX, "Reading configuration is not supported by the "
+ "device.");
return ERROR_OK;
}
- str = CMD_ARGV[0];
-
- if ((strlen(str) != 17) || (str[2] != ':' || str[5] != ':' || str[8] != ':' ||
- str[11] != ':' || str[14] != ':')) {
- command_print(CMD_CTX, "ethaddr miss format ff:ff:ff:ff:ff:ff");
- return ERROR_COMMAND_SYNTAX_ERROR;
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_ETHERNET)) {
+ command_print(CMD_CTX, "Ethernet connectivity is not supported by the "
+ "device.");
+ return ERROR_OK;
}
- for (i = 5; i >= 0; i--) {
- addr[i] = strtoul(str, &e, 16);
- str = e + 1;
- }
+ if (!CMD_ARGC) {
+ show_config_mac_address(CMD_CTX);
+ } else if (CMD_ARGC == 1) {
+ str = CMD_ARGV[0];
- if (!(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5])) {
- command_print(CMD_CTX, "invalid it's zero mac_address");
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
+ if ((strlen(str) != 17) || (str[2] != ':' || str[5] != ':' || \
+ str[8] != ':' || str[11] != ':' || str[14] != ':')) {
+ command_print(CMD_CTX, "Invalid MAC address format.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
- if (!(0x01 & addr[0])) {
- command_print(CMD_CTX, "invalid it's a multicat mac_address");
+ for (i = 5; i >= 0; i--) {
+ addr[i] = strtoul(str, &e, 16);
+ str = e + 1;
+ }
+
+ if (!(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5])) {
+ command_print(CMD_CTX, "Invalid MAC address: zero address.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (!(0x01 & addr[0])) {
+ command_print(CMD_CTX, "Invalid MAC address: multicast address.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ memcpy(tmp_config.mac_address, addr, sizeof(addr));
+ } else {
+ command_print(CMD_CTX, "Need exactly one argument for jlink config "
+ " mac.");
return ERROR_COMMAND_SYNTAX_ERROR;
}
- memcpy(jlink_cfg.mac_address, addr, sizeof(addr));
-
return ERROR_OK;
}
-static int string_to_ip(const char *s, uint8_t *ip, int *pos)
+static bool string_to_ip(const char *s, uint8_t *ip, int *pos)
{
uint8_t lip[4];
char *e;
int i;
if (!s)
- return -EINVAL;
+ return false;
for (i = 0; i < 4; i++) {
lip[i] = strtoul(s, &e, 10);
if (*e != '.' && i != 3)
- return -EINVAL;
+ return false;
s = e + 1;
}
*pos = e - s_save;
-
memcpy(ip, lip, sizeof(lip));
- return ERROR_OK;
+
+ return true;
}
static void cpy_ip(uint8_t *dst, uint8_t *src)
dst[i] = src[j];
}
-COMMAND_HANDLER(jlink_handle_jlink_ip_command)
+COMMAND_HANDLER(jlink_handle_config_ip_address_command)
{
- uint32_t ip_address;
+ uint8_t ip_address[4];
uint32_t subnet_mask = 0;
int i, len;
- int ret;
uint8_t subnet_bits = 24;
- if (CMD_ARGC < 1) {
- jlink_config_ip_dump(CMD_CTX, &jlink_cfg);
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) {
+ command_print(CMD_CTX, "Reading configuration is not supported by the "
+ "device.");
return ERROR_OK;
}
- ret = string_to_ip(CMD_ARGV[0], (uint8_t *)&ip_address, &i);
- if (ret != ERROR_OK)
- return ret;
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_ETHERNET)) {
+ command_print(CMD_CTX, "Ethernet connectivity is not supported by the "
+ "device.");
+ return ERROR_OK;
+ }
- len = strlen(CMD_ARGV[0]);
+ if (!CMD_ARGC) {
+ show_config_ip_address(CMD_CTX);
+ } else {
+ if (!string_to_ip(CMD_ARGV[0], ip_address, &i))
+ return ERROR_COMMAND_SYNTAX_ERROR;
- /* check for this format A.B.C.D/E */
+ len = strlen(CMD_ARGV[0]);
- if (i < len) {
- if (CMD_ARGV[0][i] != '/')
- return ERROR_COMMAND_SYNTAX_ERROR;
+ /* Check for format A.B.C.D/E. */
+ if (i < len) {
+ if (CMD_ARGV[0][i] != '/')
+ return ERROR_COMMAND_SYNTAX_ERROR;
- COMMAND_PARSE_NUMBER(u8, CMD_ARGV[0] + i + 1, subnet_bits);
- } else {
- if (CMD_ARGC > 1) {
- ret = string_to_ip(CMD_ARGV[1], (uint8_t *)&subnet_mask, &i);
- if (ret != ERROR_OK)
- return ret;
+ COMMAND_PARSE_NUMBER(u8, CMD_ARGV[0] + i + 1, subnet_bits);
+ } else if (CMD_ARGC > 1) {
+ if (!string_to_ip(CMD_ARGV[1], (uint8_t *)&subnet_mask, &i))
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
- }
- if (!subnet_mask)
- subnet_mask = (uint32_t)(subnet_bits < 32 ?
+ if (!subnet_mask)
+ subnet_mask = (uint32_t)(subnet_bits < 32 ?
((1ULL << subnet_bits) - 1) : 0xffffffff);
- cpy_ip(jlink_cfg.ip_address, (uint8_t *)&ip_address);
- cpy_ip(jlink_cfg.subnet_mask, (uint8_t *)&subnet_mask);
+ cpy_ip(tmp_config.ip_address, ip_address);
+ cpy_ip(tmp_config.subnet_mask, (uint8_t *)&subnet_mask);
+ }
return ERROR_OK;
}
-COMMAND_HANDLER(jlink_handle_jlink_reset_command)
+COMMAND_HANDLER(jlink_handle_config_reset_command)
{
- memset(&jlink_cfg, 0xff, sizeof(jlink_cfg));
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG))
+ return ERROR_OK;
+
+ memcpy(&tmp_config, &config, sizeof(struct device_config));
+
return ERROR_OK;
}
-COMMAND_HANDLER(jlink_handle_jlink_save_command)
+
+COMMAND_HANDLER(jlink_handle_config_write_command)
{
- if (!(jlink_caps & (1 << EMU_CAP_WRITE_CONFIG))) {
- command_print(CMD_CTX, "J-Link write emulator configuration not supported");
+ int ret;
+
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) {
+ command_print(CMD_CTX, "Reading configuration is not supported by the "
+ "device.");
return ERROR_OK;
}
- command_print(CMD_CTX, "The J-Link need to be unpluged and repluged ta have the config effective");
- return jlink_set_config(&jlink_cfg);
-}
-
-COMMAND_HANDLER(jlink_handle_jlink_usb_address_command)
-{
- uint32_t address;
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_WRITE_CONFIG)) {
+ command_print(CMD_CTX, "Writing configuration is not supported by the "
+ "device.");
+ return ERROR_OK;
+ }
- if (CMD_ARGC < 1) {
- jlink_config_usb_address_dump(CMD_CTX, &jlink_cfg);
+ if (!memcmp(&config, &tmp_config, sizeof(struct device_config))) {
+ command_print(CMD_CTX, "Operation not performed due to no changes in "
+ "the configuration.");
return ERROR_OK;
}
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address);
+ ret = jaylink_write_raw_config(devh, (const uint8_t *)&tmp_config);
- if (address > 0x3 && address != 0xff) {
- command_print(CMD_CTX, "USB Address must be between 0x00 and 0x03 or 0xff");
- return ERROR_COMMAND_SYNTAX_ERROR;
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_write_raw_config() failed: %s.",
+ jaylink_strerror_name(ret));
+ return ERROR_FAIL;
}
- jlink_cfg.usb_address = address;
- return ERROR_OK;
-}
+ if (!read_device_config(&config)) {
+ LOG_ERROR("Failed to read device configuration for verification.");
+ return ERROR_FAIL;
+ }
-COMMAND_HANDLER(jlink_handle_jlink_config_command)
-{
- struct jlink_config cfg;
- int ret = ERROR_OK;
+ if (memcmp(&config, &tmp_config, sizeof(struct device_config))) {
+ LOG_ERROR("Verification of device configuration failed. Please check "
+ "your device.");
+ return ERROR_FAIL;
+ }
- if (CMD_ARGC == 0) {
- if (!(jlink_caps & (1 << EMU_CAP_READ_CONFIG))) {
- command_print(CMD_CTX, "J-Link read emulator configuration not supported");
- goto exit;
- }
+ memcpy(&tmp_config, &config, sizeof(struct device_config));
+ command_print(CMD_CTX, "The new device configuration applies after power "
+ "cycling the J-Link device.");
- ret = jlink_get_config(&cfg);
+ return ERROR_OK;
+}
- if (ret != ERROR_OK)
- command_print(CMD_CTX, "J-Link read emulator configuration failled");
- else
- jlink_config_dump(CMD_CTX, &jlink_cfg);
+COMMAND_HANDLER(jlink_handle_config_command)
+{
+ if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) {
+ command_print(CMD_CTX, "Device doesn't support reading configuration.");
+ return ERROR_OK;
}
-exit:
- return ret;
+ if (CMD_ARGC == 0)
+ show_config(CMD_CTX);
+
+ return ERROR_OK;
}
static const struct command_registration jlink_config_subcommand_handlers[] = {
{
- .name = "kickstart",
- .handler = &jlink_handle_jlink_kickstart_command,
+ .name = "usb",
+ .handler = &jlink_handle_config_usb_address_command,
+ .mode = COMMAND_EXEC,
+ .help = "set the USB address",
+ .usage = "[0-3]",
+ },
+ {
+ .name = "targetpower",
+ .handler = &jlink_handle_config_target_power_command,
.mode = COMMAND_EXEC,
- .help = "set Kickstart power on JTAG-pin 19.",
- .usage = "[val]",
+ .help = "set the target power supply",
+ .usage = "[on|off]"
},
{
- .name = "mac_address",
- .handler = &jlink_handle_jlink_mac_address_command,
+ .name = "mac",
+ .handler = &jlink_handle_config_mac_address_command,
.mode = COMMAND_EXEC,
.help = "set the MAC Address",
.usage = "[ff:ff:ff:ff:ff:ff]",
},
{
.name = "ip",
- .handler = &jlink_handle_jlink_ip_command,
+ .handler = &jlink_handle_config_ip_address_command,
.mode = COMMAND_EXEC,
- .help = "set the ip address of the J-Link Pro, "
- "where A.B.C.D is the ip, "
- "E the bit of the subnet mask, "
- "F.G.H.I the subnet mask",
+ .help = "set the IP address, where A.B.C.D is the IP address, "
+ "E the bit of the subnet mask, F.G.H.I the subnet mask",
.usage = "[A.B.C.D[/E] [F.G.H.I]]",
},
{
.name = "reset",
- .handler = &jlink_handle_jlink_reset_command,
+ .handler = &jlink_handle_config_reset_command,
.mode = COMMAND_EXEC,
- .help = "reset the current config",
+ .help = "undo configuration changes"
},
{
- .name = "save",
- .handler = &jlink_handle_jlink_save_command,
+ .name = "write",
+ .handler = &jlink_handle_config_write_command,
.mode = COMMAND_EXEC,
- .help = "save the current config",
- },
- {
- .name = "usb_address",
- .handler = &jlink_handle_jlink_usb_address_command,
- .mode = COMMAND_EXEC,
- .help = "set the USB-Address, "
- "This will change the product id",
- .usage = "[0x00 to 0x03 or 0xff]",
+ .help = "write configuration to the device"
},
COMMAND_REGISTRATION_DONE
};
static const struct command_registration jlink_subcommand_handlers[] = {
{
- .name = "caps",
- .handler = &jlink_handle_jlink_caps_command,
+ .name = "jtag",
+ .handler = &jlink_handle_jlink_jtag_command,
.mode = COMMAND_EXEC,
- .help = "show jlink capabilities",
+ .help = "select the JTAG command version",
+ .usage = "[2|3]",
},
{
- .name = "info",
- .handler = &jlink_handle_jlink_info_command,
+ .name = "targetpower",
+ .handler = &jlink_handle_target_power_command,
.mode = COMMAND_EXEC,
- .help = "show jlink info",
+ .help = "set the target power supply",
+ .usage = "<on|off>"
},
{
- .name = "hw_jtag",
- .handler = &jlink_handle_jlink_hw_jtag_command,
+ .name = "freemem",
+ .handler = &jlink_handle_free_memory_command,
.mode = COMMAND_EXEC,
- .help = "access J-Link HW JTAG command version",
- .usage = "[2|3]",
+ .help = "show free device memory"
},
{
- .name = "config",
- .handler = &jlink_handle_jlink_config_command,
+ .name = "hwstatus",
+ .handler = &jlink_handle_hwstatus_command,
.mode = COMMAND_EXEC,
- .help = "access J-Link configuration, "
- "if no argument this will dump the config",
- .chain = jlink_config_subcommand_handlers,
+ .help = "show the hardware status"
},
{
- .name = "pid",
- .handler = &jlink_pid_command,
+ .name = "usb",
+ .handler = &jlink_usb_command,
.mode = COMMAND_CONFIG,
- .help = "set the pid of the interface we want to use",
+ .help = "set the USB address of the device that should be used",
+ .usage = "<0-3>"
},
{
.name = "serial",
.handler = &jlink_serial_command,
.mode = COMMAND_CONFIG,
- .help = "set the serial number of the J-Link adapter we want to use"
+ .help = "set the serial number of the device that should be used",
+ .usage = "<serial number>"
+ },
+ {
+ .name = "config",
+ .handler = &jlink_handle_config_command,
+ .mode = COMMAND_EXEC,
+ .help = "access the device configuration. If no argument is given "
+ "this will show the device configuration",
+ .chain = jlink_config_subcommand_handlers,
},
COMMAND_REGISTRATION_DONE
};
static int jlink_swd_init(void)
{
- LOG_INFO("JLink SWD mode enabled");
- swd_mode = true;
+ iface = JAYLINK_TIF_SWD;
return ERROR_OK;
}
-static void jlink_swd_write_reg(struct adiv5_dap *dap, uint8_t cmd, uint32_t value)
+static void jlink_swd_write_reg(struct adiv5_dap *dap, uint8_t cmd,
+ uint32_t value)
{
assert(!(cmd & SWD_CMD_RnW));
jlink_swd_queue_cmd(dap, cmd, NULL, value);
}
-static void jlink_swd_read_reg(struct adiv5_dap *dap, uint8_t cmd, uint32_t *value)
+static void jlink_swd_read_reg(struct adiv5_dap *dap, uint8_t cmd,
+ uint32_t *value)
{
assert(cmd & SWD_CMD_RnW);
jlink_swd_queue_cmd(dap, cmd, value, 0);
}
-static int_least32_t jlink_swd_frequency(struct adiv5_dap *dap, int_least32_t hz)
+static int_least32_t jlink_swd_frequency(struct adiv5_dap *dap,
+ int_least32_t hz)
{
if (hz > 0)
jlink_speed(hz / 1000);
return hz;
}
-static const struct swd_driver jlink_swd = {
- .init = jlink_swd_init,
- .frequency = jlink_swd_frequency,
- .switch_seq = jlink_swd_switch_seq,
- .read_reg = jlink_swd_read_reg,
- .write_reg = jlink_swd_write_reg,
- .run = jlink_swd_run_queue,
-};
-
-static const char * const jlink_transports[] = { "jtag", "swd", NULL };
-
-struct jtag_interface jlink_interface = {
- .name = "jlink",
- .commands = jlink_command_handlers,
- .transports = jlink_transports,
- .swd = &jlink_swd,
-
- .execute_queue = jlink_execute_queue,
- .speed = jlink_speed,
- .speed_div = jlink_speed_div,
- .khz = jlink_khz,
- .init = jlink_init,
- .quit = jlink_quit,
-};
-
/***************************************************************************/
/* J-Link tap functions */
-
static unsigned tap_length;
/* In SWD mode use tms buffer for direction control */
static uint8_t tms_buffer[JLINK_TAP_BUFFER_SIZE];
static uint8_t tdo_buffer[JLINK_TAP_BUFFER_SIZE];
struct pending_scan_result {
- int first; /* First bit position in tdo_buffer to read */
- int length; /* Number of bits to read */
- struct scan_command *command; /* Corresponding scan command */
+ int first; /* First bit position in tdo_buffer to read. */
+ int length; /* Number of bits to read. */
+ struct scan_command *command; /* Corresponding scan command. */
void *buffer;
};
int bit_index = tap_length % 8;
uint8_t bit = 1 << bit_index;
- /* we do not pad TMS, so be sure to initialize all bits */
+ /* We do not pad TMS, so be sure to initialize all bits. */
if (0 == bit_index)
tms_buffer[index_var] = tdi_buffer[index_var] = 0;
int tdi = (buffer[i / 8] & (1 << (i % 8))) != 0;
jlink_tap_append_step(tms, tdi);
}
+
pending_scan_results_length++;
}
-/* Pad and send a tap sequence to the device, and receive the answer.
- * For the purpose of padding we assume that we are in idle or pause state. */
+/*
+ * Pad and send a tap sequence to the device, and receive the answer. For the
+ * purpose of padding we assume that we are in idle or pause state.
+ */
static int jlink_tap_execute(void)
{
- int byte_length;
int i;
- int result;
+ int ret;
if (!tap_length)
return ERROR_OK;
- /* JLink returns an extra NULL in packet when size of incoming
- * message is a multiple of 64, creates problems with USB comms.
- * WARNING: This will interfere with tap state counting. */
- while ((DIV_ROUND_UP(tap_length, 8) % 64) == 0)
- jlink_tap_append_step((tap_get_state() == TAP_RESET) ? 1 : 0, 0);
-
- /* number of full bytes (plus one if some would be left over) */
- byte_length = DIV_ROUND_UP(tap_length, 8);
-
- bool use_jtag3 = jlink_hw_jtag_version >= 3;
- usb_out_buffer[0] = use_jtag3 ? EMU_CMD_HW_JTAG3 : EMU_CMD_HW_JTAG2;
- usb_out_buffer[1] = 0;
- usb_out_buffer[2] = (tap_length >> 0) & 0xff;
- usb_out_buffer[3] = (tap_length >> 8) & 0xff;
- memcpy(usb_out_buffer + 4, tms_buffer, byte_length);
- memcpy(usb_out_buffer + 4 + byte_length, tdi_buffer, byte_length);
+ jlink_last_state = jtag_debug_state_machine(tms_buffer, tdi_buffer,
+ tap_length, jlink_last_state);
jlink_last_state = jtag_debug_state_machine(tms_buffer, tdi_buffer,
- tap_length, jlink_last_state);
+ tap_length, jlink_last_state);
- result = jlink_usb_message(jlink_handle, 4 + 2 * byte_length,
- use_jtag3 ? byte_length + 1 : byte_length);
- if (result != ERROR_OK) {
- LOG_ERROR("jlink_tap_execute failed USB io (%d)", result);
- jlink_tap_init();
- return ERROR_JTAG_QUEUE_FAILED;
- }
+ ret = jaylink_jtag_io(devh, tms_buffer, tdi_buffer, tdo_buffer,
+ tap_length, jtag_command_version);
- result = use_jtag3 ? usb_in_buffer[byte_length] : 0;
- if (result != 0) {
- LOG_ERROR("jlink_tap_execute failed, result %d (%s)", result,
- result == 1 ? "adaptive clocking timeout" : "unknown");
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_jtag_io() failed: %s.", jaylink_strerror_name(ret));
jlink_tap_init();
return ERROR_JTAG_QUEUE_FAILED;
}
- memcpy(tdo_buffer, usb_in_buffer, byte_length);
-
for (i = 0; i < pending_scan_results_length; i++) {
struct pending_scan_result *pending_scan_result = &pending_scan_results_buffer[i];
uint8_t *buffer = pending_scan_result->buffer;
int first = pending_scan_result->first;
struct scan_command *command = pending_scan_result->command;
- /* Copy to buffer */
+ /* Copy to buffer. */
buf_set_buf(tdo_buffer, first, buffer, 0, length);
- DEBUG_JTAG_IO("pending scan result, length = %d", length);
-
- jlink_debug_buffer(buffer, DIV_ROUND_UP(length, 8));
+ DEBUG_JTAG_IO("Pending scan result, length = %d.", length);
if (jtag_read_buffer(buffer, command) != ERROR_OK) {
jlink_tap_init();
}
jlink_tap_init();
+
return ERROR_OK;
}
len -= 32;
tap_pos += 32;
}
+
if (len)
buf_set_u32(buf, tap_pos, len, val);
}
bit_copy(tdi_buffer, tap_length, data, 0, len);
else
fill_buffer(tdi_buffer, 0, len);
+
fill_buffer(tms_buffer, dir_out, len);
tap_length += len;
}
unsigned int s_len;
switch (seq) {
- case LINE_RESET:
- LOG_DEBUG("SWD line reset");
- s = swd_seq_line_reset;
- s_len = swd_seq_line_reset_len;
- break;
- case JTAG_TO_SWD:
- LOG_DEBUG("JTAG-to-SWD");
- s = swd_seq_jtag_to_swd;
- s_len = swd_seq_jtag_to_swd_len;
- break;
- case SWD_TO_JTAG:
- LOG_DEBUG("SWD-to-JTAG");
- s = swd_seq_swd_to_jtag;
- s_len = swd_seq_swd_to_jtag_len;
- break;
- default:
- LOG_ERROR("Sequence %d not supported", seq);
- return ERROR_FAIL;
+ case LINE_RESET:
+ LOG_DEBUG("SWD line reset");
+ s = swd_seq_line_reset;
+ s_len = swd_seq_line_reset_len;
+ break;
+ case JTAG_TO_SWD:
+ LOG_DEBUG("JTAG-to-SWD");
+ s = swd_seq_jtag_to_swd;
+ s_len = swd_seq_jtag_to_swd_len;
+ break;
+ case SWD_TO_JTAG:
+ LOG_DEBUG("SWD-to-JTAG");
+ s = swd_seq_swd_to_jtag;
+ s_len = swd_seq_swd_to_jtag_len;
+ break;
+ default:
+ LOG_ERROR("Sequence %d not supported.", seq);
+ return ERROR_FAIL;
}
jlink_queue_data_out(s, s_len);
static int jlink_swd_run_queue(struct adiv5_dap *dap)
{
- LOG_DEBUG("Executing %d queued transactions", pending_scan_results_length);
- int retval;
+ int i;
+ int ret;
+
+ LOG_DEBUG("Executing %d queued transactions.", pending_scan_results_length);
if (queued_retval != ERROR_OK) {
- LOG_DEBUG("Skipping due to previous errors: %d", queued_retval);
+ LOG_DEBUG("Skipping due to previous errors: %d.", queued_retval);
goto skip;
}
- /* A transaction must be followed by another transaction or at least 8 idle cycles to
- * ensure that data is clocked through the AP. */
+ /*
+ * A transaction must be followed by another transaction or at least 8 idle
+ * cycles to ensure that data is clocked through the AP.
+ */
jlink_queue_data_out(NULL, 8);
- size_t byte_length = DIV_ROUND_UP(tap_length, 8);
-
- /* There's a comment in jlink_tap_execute saying JLink returns
- * an extra NULL in packet when size of incoming message is a
- * multiple of 64. Someone should verify if that's still the
- * case with the current jlink firmware */
-
- usb_out_buffer[0] = EMU_CMD_HW_JTAG3;
- usb_out_buffer[1] = 0;
- usb_out_buffer[2] = (tap_length >> 0) & 0xff;
- usb_out_buffer[3] = (tap_length >> 8) & 0xff;
- memcpy(usb_out_buffer + 4, tms_buffer, byte_length);
- memcpy(usb_out_buffer + 4 + byte_length, tdi_buffer, byte_length);
+ ret = jaylink_swd_io(devh, tms_buffer, tdi_buffer, tdo_buffer, tap_length);
- retval = jlink_usb_message(jlink_handle, 4 + 2 * byte_length,
- byte_length + 1);
- if (retval != ERROR_OK) {
- LOG_ERROR("jlink_swd_run_queue failed USB io (%d)", retval);
+ if (ret != JAYLINK_OK) {
+ LOG_ERROR("jaylink_swd_io() failed: %s.", jaylink_strerror_name(ret));
goto skip;
}
- retval = usb_in_buffer[byte_length];
- if (retval) {
- LOG_ERROR("jlink_swd_run_queue failed, result %d", retval);
- goto skip;
- }
-
- for (int i = 0; i < pending_scan_results_length; i++) {
- int ack = buf_get_u32(usb_in_buffer, pending_scan_results_buffer[i].first, 3);
+ for (i = 0; i < pending_scan_results_length; i++) {
+ int ack = buf_get_u32(tdo_buffer, pending_scan_results_buffer[i].first, 3);
if (ack != SWD_ACK_OK) {
LOG_DEBUG("SWD ack not OK: %d %s", ack,
queued_retval = ack == SWD_ACK_WAIT ? ERROR_WAIT : ERROR_FAIL;
goto skip;
} else if (pending_scan_results_buffer[i].length) {
- uint32_t data = buf_get_u32(usb_in_buffer, 3 + pending_scan_results_buffer[i].first, 32);
- int parity = buf_get_u32(usb_in_buffer, 3 + 32 + pending_scan_results_buffer[i].first, 1);
+ uint32_t data = buf_get_u32(tdo_buffer, 3 + pending_scan_results_buffer[i].first, 32);
+ int parity = buf_get_u32(tdo_buffer, 3 + 32 + pending_scan_results_buffer[i].first, 1);
if (parity != parity_u32(data)) {
- LOG_ERROR("SWD Read data parity mismatch");
+ LOG_ERROR("SWD: Read data parity mismatch.");
queued_retval = ERROR_FAIL;
goto skip;
}
skip:
jlink_tap_init();
- retval = queued_retval;
+ ret = queued_retval;
queued_retval = ERROR_OK;
- return retval;
+ return ret;
}
-static void jlink_swd_queue_cmd(struct adiv5_dap *dap, uint8_t cmd, uint32_t *dst, uint32_t data)
+static void jlink_swd_queue_cmd(struct adiv5_dap *dap, uint8_t cmd,
+ uint32_t *dst, uint32_t data)
{
uint8_t data_parity_trn[DIV_ROUND_UP(32 + 1, 8)];
- if (tap_length + 46 + 8 + dap->memaccess_tck >= sizeof(tdi_buffer) * 8 ||
- pending_scan_results_length == MAX_PENDING_SCAN_RESULTS) {
+
+ if (tap_length + 46 + 8 + dap->memaccess_tck >= swd_buffer_size * 8 ||
+ pending_scan_results_length == MAX_PENDING_SCAN_RESULTS) {
/* Not enough room in the queue. Run the queue. */
queued_retval = jlink_swd_run_queue(dap);
}
pending_scan_results_buffer[pending_scan_results_length].first = tap_length;
if (cmd & SWD_CMD_RnW) {
- /* Queue a read transaction */
+ /* Queue a read transaction. */
pending_scan_results_buffer[pending_scan_results_length].length = 32;
pending_scan_results_buffer[pending_scan_results_length].buffer = dst;
jlink_queue_data_in(1 + 3 + 32 + 1 + 1);
} else {
- /* Queue a write transaction */
+ /* Queue a write transaction. */
pending_scan_results_buffer[pending_scan_results_length].length = 0;
jlink_queue_data_in(1 + 3 + 1);
pending_scan_results_length++;
- /* Insert idle cycles after AP accesses to avoid WAIT */
+ /* Insert idle cycles after AP accesses to avoid WAIT. */
if (cmd & SWD_CMD_APnDP)
jlink_queue_data_out(NULL, dap->memaccess_tck);
}
-/*****************************************************************************/
-/* JLink USB low-level functions */
-
-static struct jlink *jlink_usb_open()
-{
- struct jtag_libusb_device_handle *devh;
- if (jtag_libusb_open(vids, pids, jlink_serial, &devh) != ERROR_OK)
- return NULL;
-
- /* BE ***VERY CAREFUL*** ABOUT MAKING CHANGES IN THIS
- * AREA!!!!!!!!!!! The behavior of libusb is not completely
- * consistent across Windows, Linux, and Mac OS X platforms.
- * The actions taken in the following compiler conditionals may
- * not agree with published documentation for libusb, but were
- * found to be necessary through trials and tribulations. Even
- * little tweaks can break one or more platforms, so if you do
- * make changes test them carefully on all platforms before
- * committing them!
- */
-
-/* This entire block can probably be removed. It was a workaround for
- * libusb0.1 and old JLink firmware. It has already be removed for
- * windows and causing problems (LPC Link-2 with JLink firmware) on
- * Linux with libusb1.0.
- *
- * However, for now the behavior will be left unchanged for non-windows
- * platforms using libusb0.1 due to lack of testing.
- */
-#if IS_WIN32 == 0 && HAVE_LIBUSB1 == 0
-
- jtag_libusb_reset_device(devh);
-
-#if IS_DARWIN == 0
-
- int timeout = 5;
- /* reopen jlink after usb_reset
- * on win32 this may take a second or two to re-enumerate */
- int retval;
- while ((retval = jtag_libusb_open(vids, pids, jlink_serial, &devh)) != ERROR_OK) {
- usleep(1000);
- timeout--;
- if (!timeout)
- break;
- }
- if (ERROR_OK != retval)
- return NULL;
-#endif
-
-#endif
-
- /* usb_set_configuration is only required under win32
- * with libusb 0.1 and libusb0.sys. For libusb 1.0 it is a no-op
- * since the configuration is already set. */
- jtag_libusb_set_configuration(devh, 0);
-
- jtag_libusb_choose_interface(devh, &jlink_read_ep, &jlink_write_ep,
- JLINK_USB_INTERFACE_CLASS,
- JLINK_USB_INTERFACE_SUBCLASS,
- JLINK_USB_INTERFACE_PROTOCOL);
-
- struct jlink *result = malloc(sizeof(struct jlink));
- result->usb_handle = devh;
- return result;
-}
-
-static void jlink_usb_close(struct jlink *jlink)
-{
- jtag_libusb_close(jlink->usb_handle);
- free(jlink);
-}
-
-/* Send a message and receive the reply. */
-static int jlink_usb_message(struct jlink *jlink, int out_length, int in_length)
-{
- int result;
-
- result = jlink_usb_write(jlink, out_length);
- if (result != out_length) {
- LOG_ERROR("usb_bulk_write failed (requested=%d, result=%d)",
- out_length, result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- result = jlink_usb_read(jlink, in_length);
- if (result != in_length) {
- LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)",
- in_length, result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
- return ERROR_OK;
-}
-
-/* calls the given usb_bulk_* function, allowing for the data to
- * trickle in with some timeouts */
-static int usb_bulk_with_retries(
- int (*f)(jtag_libusb_device_handle *, int, char *, int, int),
- jtag_libusb_device_handle *dev, int ep,
- char *bytes, int size, int timeout)
-{
- int tries = 3, count = 0;
-
- while (tries && (count < size)) {
- int result = f(dev, ep, bytes + count, size - count, timeout);
- if (result > 0)
- count += result;
- else if ((-ETIMEDOUT != result) || !--tries)
- return result;
- }
- return count;
-}
-
-static int wrap_usb_bulk_write(jtag_libusb_device_handle *dev, int ep,
- char *buff, int size, int timeout)
-{
- /* usb_bulk_write() takes const char *buff */
- return jtag_libusb_bulk_write(dev, ep, buff, size, timeout);
-}
-
-static inline int usb_bulk_write_ex(jtag_libusb_device_handle *dev, int ep,
- char *bytes, int size, int timeout)
-{
- return usb_bulk_with_retries(&wrap_usb_bulk_write,
- dev, ep, bytes, size, timeout);
-}
-
-static inline int usb_bulk_read_ex(jtag_libusb_device_handle *dev, int ep,
- char *bytes, int size, int timeout)
-{
- return usb_bulk_with_retries(&jtag_libusb_bulk_read,
- dev, ep, bytes, size, timeout);
-}
-
-/* Write data from out_buffer to USB. */
-static int jlink_usb_write(struct jlink *jlink, int out_length)
-{
- int result;
-
- if (out_length > JLINK_OUT_BUFFER_SIZE) {
- LOG_ERROR("jlink_write illegal out_length=%d (max=%d)",
- out_length, JLINK_OUT_BUFFER_SIZE);
- return -1;
- }
-
- result = usb_bulk_write_ex(jlink->usb_handle, jlink_write_ep,
- (char *)usb_out_buffer, out_length, JLINK_USB_TIMEOUT);
-
- DEBUG_JTAG_IO("jlink_usb_write, out_length = %d, result = %d",
- out_length, result);
-
- jlink_debug_buffer(usb_out_buffer, out_length);
- return result;
-}
-
-/* Read data from USB into in_buffer. */
-static int jlink_usb_read(struct jlink *jlink, int expected_size)
-{
- int result = usb_bulk_read_ex(jlink->usb_handle, jlink_read_ep,
- (char *)usb_in_buffer, expected_size, JLINK_USB_TIMEOUT);
-
- DEBUG_JTAG_IO("jlink_usb_read, result = %d", result);
-
- jlink_debug_buffer(usb_in_buffer, result);
- return result;
-}
-
-/*
- * Send a message and receive the reply - simple messages.
- *
- * @param jlink pointer to driver data
- * @param out_length data length in @c usb_out_buffer
- * @param in_length data length to be read to @c usb_in_buffer
- */
-static int jlink_usb_io(struct jlink *jlink, int out_length, int in_length)
-{
- int result;
-
- result = jlink_usb_write(jlink, out_length);
- if (result != out_length) {
- LOG_ERROR("usb_bulk_write failed (requested=%d, result=%d)",
- out_length, result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- result = jlink_usb_read(jlink, in_length);
- if (result != in_length) {
- LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)",
- in_length, result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- /*
- * Section 4.2.4 IN-transaction:
- * read dummy 0-byte packet if transaction size is
- * multiple of 64 bytes but not max. size of 0x8000
- */
- if ((in_length % 64) == 0 && in_length != 0x8000) {
- char dummy_buffer;
- result = usb_bulk_read_ex(jlink->usb_handle, jlink_read_ep,
- &dummy_buffer, 1, JLINK_USB_TIMEOUT);
- if (result != 0) {
- LOG_ERROR("dummy byte read failed");
- return ERROR_JTAG_DEVICE_ERROR;
- }
- }
- return ERROR_OK;
-}
-
-#ifdef _DEBUG_USB_COMMS_
-#define BYTES_PER_LINE 16
+static const struct swd_driver jlink_swd = {
+ .init = &jlink_swd_init,
+ .frequency = &jlink_swd_frequency,
+ .switch_seq = &jlink_swd_switch_seq,
+ .read_reg = &jlink_swd_read_reg,
+ .write_reg = &jlink_swd_write_reg,
+ .run = &jlink_swd_run_queue,
+};
-static void jlink_debug_buffer(uint8_t *buffer, int length)
-{
- char line[81];
- char s[4];
- int i;
- int j;
+static const char * const jlink_transports[] = { "jtag", "swd", NULL };
- for (i = 0; i < length; i += BYTES_PER_LINE) {
- snprintf(line, 5, "%04x", i);
- for (j = i; j < i + BYTES_PER_LINE && j < length; j++) {
- snprintf(s, 4, " %02x", buffer[j]);
- strcat(line, s);
- }
- LOG_DEBUG("%s", line);
- }
-}
-#endif
+struct jtag_interface jlink_interface = {
+ .name = "jlink",
+ .commands = jlink_command_handlers,
+ .transports = jlink_transports,
+ .swd = &jlink_swd,
+ .execute_queue = &jlink_execute_queue,
+ .speed = &jlink_speed,
+ .speed_div = &jlink_speed_div,
+ .khz = &jlink_khz,
+ .init = &jlink_init,
+ .quit = &jlink_quit,
+ .config_trace = &config_trace,
+ .poll_trace = &poll_trace,
+};
projects / openocd / commitdiff