static int mem_ap_setup_tar(struct adiv5_ap *ap, uint32_t tar)
{
- if (tar != ap->tar_value ||
- (ap->csw_value & CSW_ADDRINC_MASK)) {
+ if (!ap->tar_valid || tar != ap->tar_value) {
/* LOG_DEBUG("DAP: Set TAR %x",tar); */
int retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR, tar);
if (retval != ERROR_OK)
return retval;
ap->tar_value = tar;
+ ap->tar_valid = true;
}
return ERROR_OK;
}
+static int mem_ap_read_tar(struct adiv5_ap *ap, uint32_t *tar)
+{
+ int retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR, tar);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+
+ ap->tar_value = *tar;
+ ap->tar_valid = true;
+ return ERROR_OK;
+}
+
+static uint32_t mem_ap_get_tar_increment(struct adiv5_ap *ap)
+{
+ switch (ap->csw_value & CSW_ADDRINC_MASK) {
+ case CSW_ADDRINC_SINGLE:
+ switch (ap->csw_value & CSW_SIZE_MASK) {
+ case CSW_8BIT:
+ return 1;
+ case CSW_16BIT:
+ return 2;
+ case CSW_32BIT:
+ return 4;
+ }
+ case CSW_ADDRINC_PACKED:
+ return 4;
+ }
+ return 0;
+}
+
+/* mem_ap_update_tar_cache is called after an access to MEM_AP_REG_DRW
+ */
+static void mem_ap_update_tar_cache(struct adiv5_ap *ap)
+{
+ if (!ap->tar_valid)
+ return;
+
+ uint32_t inc = mem_ap_get_tar_increment(ap);
+ if (inc >= max_tar_block_size(ap->tar_autoincr_block, ap->tar_value))
+ ap->tar_valid = false;
+ else
+ ap->tar_value += inc;
+}
+
/**
* Queue transactions setting up transfer parameters for the
* currently selected MEM-AP.
if (ap->unaligned_access_bad && (address % size != 0))
return ERROR_TARGET_UNALIGNED_ACCESS;
- retval = mem_ap_setup_tar(ap, address ^ addr_xor);
- if (retval != ERROR_OK)
- return retval;
-
while (nbytes > 0) {
uint32_t this_size = size;
if (retval != ERROR_OK)
break;
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
+ if (retval != ERROR_OK)
+ return retval;
+
/* How many source bytes each transfer will consume, and their location in the DRW,
* depends on the type of transfer and alignment. See ARM document IHI0031C. */
uint32_t outvalue = 0;
if (retval != ERROR_OK)
break;
- /* Rewrite TAR if it wrapped or we're xoring addresses */
- if (addrinc && (addr_xor || (address % ap->tar_autoincr_block < size && nbytes > 0))) {
- retval = mem_ap_setup_tar(ap, address ^ addr_xor);
- if (retval != ERROR_OK)
- break;
- }
+ mem_ap_update_tar_cache(ap);
}
/* REVISIT: Might want to have a queued version of this function that does not run. */
if (retval != ERROR_OK) {
uint32_t tar;
- if (dap_queue_ap_read(ap, MEM_AP_REG_TAR, &tar) == ERROR_OK
- && dap_run(dap) == ERROR_OK)
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK)
LOG_ERROR("Failed to write memory at 0x%08"PRIx32, tar);
else
LOG_ERROR("Failed to write memory and, additionally, failed to find out where");
return ERROR_FAIL;
}
- retval = mem_ap_setup_tar(ap, address);
- if (retval != ERROR_OK) {
- free(read_buf);
- return retval;
- }
-
/* Queue up all reads. Each read will store the entire DRW word in the read buffer. How many
* useful bytes it contains, and their location in the word, depends on the type of transfer
* and alignment. */
if (retval != ERROR_OK)
break;
+ retval = mem_ap_setup_tar(ap, address);
+ if (retval != ERROR_OK)
+ break;
+
retval = dap_queue_ap_read(ap, MEM_AP_REG_DRW, read_ptr++);
if (retval != ERROR_OK)
break;
nbytes -= this_size;
address += this_size;
- /* Rewrite TAR if it wrapped */
- if (addrinc && address % ap->tar_autoincr_block < size && nbytes > 0) {
- retval = mem_ap_setup_tar(ap, address);
- if (retval != ERROR_OK)
- break;
- }
+ mem_ap_update_tar_cache(ap);
}
if (retval == ERROR_OK)
* at least give the caller what we have. */
if (retval != ERROR_OK) {
uint32_t tar;
- if (dap_queue_ap_read(ap, MEM_AP_REG_TAR, &tar) == ERROR_OK
- && dap_run(dap) == ERROR_OK) {
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK) {
+ /* TAR is incremented after failed transfer on some devices (eg Cortex-M4) */
LOG_ERROR("Failed to read memory at 0x%08"PRIx32, tar);
if (nbytes > tar - address)
nbytes = tar - address;
return dap;
}
+/**
+ * Invalidate cached DP select and cached TAR and CSW of all APs
+ */
+void dap_invalidate_cache(struct adiv5_dap *dap)
+{
+ dap->select = DP_SELECT_INVALID;
+ dap->last_read = NULL;
+
+ int i;
+ for (i = 0; i <= 255; i++) {
+ /* force csw and tar write on the next mem-ap access */
+ dap->ap[i].tar_valid = false;
+ dap->ap[i].csw_value = 0;
+ }
+}
+
/**
* Initialize a DAP. This sets up the power domains, prepares the DP
* for further use and activates overrun checking.
if (!dap->ops)
dap->ops = &jtag_dp_ops;
- dap->select = DP_SELECT_INVALID;
- dap->last_read = NULL;
+ dap_invalidate_cache(dap);
for (size_t i = 0; i < 30; i++) {
/* DP initialization */
int retval;
struct adiv5_dap *dap = ap->dap;
+ ap->tar_valid = false;
+ ap->csw_value = 0; /* force csw and tar write */
retval = mem_ap_setup_transfer(ap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
if (retval != ERROR_OK)
return retval;