]> git.sur5r.net Git - openocd/commitdiff
Renamed mx2/imx27 to mxc.
authorErik Ahlén <erik.ahlen@avalonenterprise.com>
Tue, 13 Dec 2011 09:24:11 +0000 (10:24 +0100)
committerØyvind Harboe <oyvindharboe@gmail.com>
Mon, 19 Dec 2011 07:27:31 +0000 (07:27 +0000)
Renamed all functions, enums, structs and defines from mx2/imx27 to mxc. This is in preparation of adding support for mx35 NFC(v2).

Change-Id: I92ad23f0cfab605215bbf0d5846c5c288423facf
Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com>
Reviewed-on: http://openocd.zylin.com/267
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
src/flash/nand/driver.c
src/flash/nand/mx2.c
src/flash/nand/mx2.h
tcl/board/tx27_stk5.cfg

index f34811ba2a7415c72b83481f4450e6e960c12bec..ae35b64e020a318fdf54f5025a1694ac79543572 100644 (file)
@@ -38,7 +38,7 @@ extern struct nand_flash_controller s3c2412_nand_controller;
 extern struct nand_flash_controller s3c2440_nand_controller;
 extern struct nand_flash_controller s3c2443_nand_controller;
 extern struct nand_flash_controller s3c6400_nand_controller;
-extern struct nand_flash_controller imx27_nand_flash_controller;
+extern struct nand_flash_controller mxc_nand_flash_controller;
 extern struct nand_flash_controller imx31_nand_flash_controller;
 extern struct nand_flash_controller at91sam9_nand_controller;
 extern struct nand_flash_controller nuc910_nand_controller;
@@ -57,7 +57,7 @@ static struct nand_flash_controller *nand_flash_controllers[] =
        &s3c2440_nand_controller,
        &s3c2443_nand_controller,
        &s3c6400_nand_controller,
-       &imx27_nand_flash_controller,
+       &mxc_nand_flash_controller,
        &imx31_nand_flash_controller,
        &at91sam9_nand_controller,
        &nuc910_nand_controller,
index fca8ea2fc70a1f15b1ab1cbcf73bce2af549869a..ae9b8281ed632f99a5fae65d6d723257ac7ed4c6 100644 (file)
  ***************************************************************************/
 
 /*
- * Freescale iMX2* OpenOCD NAND Flash controller support.
- * based on Freescale iMX3* OpenOCD NAND Flash controller support.
+ * Freescale iMX OpenOCD NAND Flash controller support.
+ * based on Freescale iMX2* and iMX3* OpenOCD NAND Flash controller support.
  */
 
 /*
- * driver tested with Samsung K9F2G08UXA and Numonyx/ST NAND02G-B2D @imx27
+ * driver tested with Samsung K9F2G08UXA and Numonyx/ST NAND02G-B2D @mxc
  * tested "nand probe #", "nand erase # 0 #", "nand dump # file 0 #",
  * "nand write # file 0", "nand verify"
  *
  * get_next_halfword_from_sram_buffer() not tested
- * !! all function only tested with 2k page nand device; imx27_write_page
+ * !! all function only tested with 2k page nand device; mxc_write_page
  *    writes the 4 MAIN_BUFFER's and is not compatible with < 2k page
  * !! oob must be be used due to NFS bug
 */
  * This is useful when OpenOCD is used with a graphical
  * front-end to estimate progression of the global read/write
  */
-#undef _MX2_PRINT_STAT
-/* #define _MX2_PRINT_STAT */
+#undef _MXC_PRINT_STAT
+/* #define _MXC_PRINT_STAT */
 
 static const char target_not_halted_err_msg[] =
-       "target must be halted to use mx2 NAND flash controller";
+       "target must be halted to use mxc NAND flash controller";
 static const char data_block_size_err_msg[] =
        "minimal granularity is one half-word, %" PRId32 " is incorrect";
 static const char sram_buffer_bounds_err_msg[] =
@@ -70,24 +70,24 @@ static int poll_for_complete_op(struct target *target, const char *text);
 static int validate_target_state(struct nand_device *nand);
 static int do_data_output(struct nand_device *nand);
 
-static int imx27_command(struct nand_device *nand, uint8_t command);
-static int imx27_address(struct nand_device *nand, uint8_t address);
+static int mxc_command(struct nand_device *nand, uint8_t command);
+static int mxc_address(struct nand_device *nand, uint8_t address);
 
-NAND_DEVICE_COMMAND_HANDLER(imx27_nand_device_command)
+NAND_DEVICE_COMMAND_HANDLER(mxc_nand_device_command)
 {
-       struct mx2_nf_controller *mx2_nf_info;
+       struct mxc_nf_controller *mxc_nf_info;
        int hwecc_needed;
        int x;
 
-       mx2_nf_info = malloc(sizeof(struct mx2_nf_controller));
-       if (mx2_nf_info == NULL) {
+       mxc_nf_info = malloc(sizeof(struct mxc_nf_controller));
+       if (mxc_nf_info == NULL) {
                LOG_ERROR("no memory for nand controller");
                return ERROR_FAIL;
        }
-       nand->controller_priv = mx2_nf_info;
+       nand->controller_priv = mxc_nf_info;
 
        if (CMD_ARGC < 3) {
-               LOG_ERROR("use \"nand device imx27 target noecc|hwecc\"");
+               LOG_ERROR("use \"nand device mxc target noecc|hwecc\"");
                return ERROR_FAIL;
        }
 
@@ -96,13 +96,13 @@ NAND_DEVICE_COMMAND_HANDLER(imx27_nand_device_command)
         */
        hwecc_needed = strcmp(CMD_ARGV[2], "hwecc");
        if (hwecc_needed == 0)
-               mx2_nf_info->flags.hw_ecc_enabled = 1;
+               mxc_nf_info->flags.hw_ecc_enabled = 1;
        else
-               mx2_nf_info->flags.hw_ecc_enabled = 0;
+               mxc_nf_info->flags.hw_ecc_enabled = 0;
 
-       mx2_nf_info->optype = MX2_NF_DATAOUT_PAGE;
-       mx2_nf_info->fin = MX2_NF_FIN_NONE;
-       mx2_nf_info->flags.target_little_endian =
+       mxc_nf_info->optype = MXC_NF_DATAOUT_PAGE;
+       mxc_nf_info->fin = MXC_NF_FIN_NONE;
+       mxc_nf_info->flags.target_little_endian =
        (nand->target->endianness == TARGET_LITTLE_ENDIAN);
 
        /*
@@ -110,15 +110,15 @@ NAND_DEVICE_COMMAND_HANDLER(imx27_nand_device_command)
         */
        x = 1;
        if (*(char *) &x == 1)
-               mx2_nf_info->flags.host_little_endian = 1;
+               mxc_nf_info->flags.host_little_endian = 1;
        else
-               mx2_nf_info->flags.host_little_endian = 0;
+               mxc_nf_info->flags.host_little_endian = 0;
        return ERROR_OK;
 }
 
-static int imx27_init(struct nand_device *nand)
+static int mxc_init(struct nand_device *nand)
 {
-       struct mx2_nf_controller *mx2_nf_info = nand->controller_priv;
+       struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
        struct target *target = nand->target;
 
        int validate_target_result;
@@ -133,60 +133,60 @@ static int imx27_init(struct nand_device *nand)
        if (validate_target_result != ERROR_OK)
                return validate_target_result;
 
-       target_read_u16(target, MX2_NF_BUFSIZ, &buffsize_register_content);
-       mx2_nf_info->flags.one_kb_sram = !(buffsize_register_content & 0x000f);
+       target_read_u16(target, MXC_NF_BUFSIZ, &buffsize_register_content);
+       mxc_nf_info->flags.one_kb_sram = !(buffsize_register_content & 0x000f);
 
-       target_read_u32(target, MX2_FMCR, &pcsr_register_content);
+       target_read_u32(target, MXC_FMCR, &pcsr_register_content);
        if (!nand->bus_width) {
-               /* bus_width not yet defined. Read it from MX2_FMCR */
+               /* bus_width not yet defined. Read it from MXC_FMCR */
                nand->bus_width =
-                       (pcsr_register_content & MX2_FMCR_NF_16BIT_SEL) ? 16 : 8;
+                       (pcsr_register_content & MXC_FMCR_NF_16BIT_SEL) ? 16 : 8;
        } else {
-               /* bus_width forced in soft. Sync it to MX2_FMCR */
+               /* bus_width forced in soft. Sync it to MXC_FMCR */
                pcsr_register_content |=
-                       ((nand->bus_width == 16) ? MX2_FMCR_NF_16BIT_SEL : 0x00000000);
-               target_write_u32(target, MX2_FMCR, pcsr_register_content);
+                       ((nand->bus_width == 16) ? MXC_FMCR_NF_16BIT_SEL : 0x00000000);
+               target_write_u32(target, MXC_FMCR, pcsr_register_content);
        }
        if (nand->bus_width == 16)
-               LOG_DEBUG("MX2_NF : bus is 16-bit width");
+               LOG_DEBUG("MXC_NF : bus is 16-bit width");
        else
-               LOG_DEBUG("MX2_NF : bus is 8-bit width");
+               LOG_DEBUG("MXC_NF : bus is 8-bit width");
 
        if (!nand->page_size) {
-               nand->page_size = (pcsr_register_content & MX2_FMCR_NF_FMS) ? 2048 : 512;
+               nand->page_size = (pcsr_register_content & MXC_FMCR_NF_FMS) ? 2048 : 512;
        } else {
                pcsr_register_content |=
-                       ((nand->page_size == 2048) ? MX2_FMCR_NF_FMS : 0x00000000);
-               target_write_u32(target, MX2_FMCR, pcsr_register_content);
+                       ((nand->page_size == 2048) ? MXC_FMCR_NF_FMS : 0x00000000);
+               target_write_u32(target, MXC_FMCR, pcsr_register_content);
        }
-       if (mx2_nf_info->flags.one_kb_sram && (nand->page_size == 2048)) {
+       if (mxc_nf_info->flags.one_kb_sram && (nand->page_size == 2048)) {
                LOG_ERROR("NAND controller have only 1 kb SRAM, so "
                          "pagesize 2048 is incompatible with it");
        } else {
-               LOG_DEBUG("MX2_NF : NAND controller can handle pagesize of 2048");
+               LOG_DEBUG("MXC_NF : NAND controller can handle pagesize of 2048");
        }
 
        initialize_nf_controller(nand);
 
        retval = ERROR_OK;
-       retval |= imx27_command(nand, NAND_CMD_STATUS);
-       retval |= imx27_address(nand, 0x00);
+       retval |= mxc_command(nand, NAND_CMD_STATUS);
+       retval |= mxc_address(nand, 0x00);
        retval |= do_data_output(nand);
        if (retval != ERROR_OK) {
                LOG_ERROR(get_status_register_err_msg);
                return ERROR_FAIL;
        }
-       target_read_u16(target, MX2_NF_MAIN_BUFFER0, &nand_status_content);
+       target_read_u16(target, MXC_NF_MAIN_BUFFER0, &nand_status_content);
        if (!(nand_status_content & 0x0080)) {
                LOG_INFO("NAND read-only");
-               mx2_nf_info->flags.nand_readonly = 1;
+               mxc_nf_info->flags.nand_readonly = 1;
        } else {
-               mx2_nf_info->flags.nand_readonly = 0;
+               mxc_nf_info->flags.nand_readonly = 0;
        }
        return ERROR_OK;
 }
 
-static int imx27_read_data(struct nand_device *nand, void *data)
+static int mxc_read_data(struct nand_device *nand, void *data)
 {
        struct target *target = nand->target;
        int validate_target_result;
@@ -203,7 +203,7 @@ static int imx27_read_data(struct nand_device *nand, void *data)
         */
        try_data_output_from_nand_chip = do_data_output(nand);
        if (try_data_output_from_nand_chip != ERROR_OK) {
-               LOG_ERROR("imx27_read_data : read data failed : '%x'",
+               LOG_ERROR("mxc_read_data : read data failed : '%x'",
                                  try_data_output_from_nand_chip);
                return try_data_output_from_nand_chip;
        }
@@ -216,13 +216,13 @@ static int imx27_read_data(struct nand_device *nand, void *data)
        return ERROR_OK;
 }
 
-static int imx27_write_data(struct nand_device *nand, uint16_t data)
+static int mxc_write_data(struct nand_device *nand, uint16_t data)
 {
        LOG_ERROR("write_data() not implemented");
        return ERROR_NAND_OPERATION_FAILED;
 }
 
-static int imx27_reset(struct nand_device *nand)
+static int mxc_reset(struct nand_device *nand)
 {
        /*
         * validate target state
@@ -235,9 +235,9 @@ static int imx27_reset(struct nand_device *nand)
        return ERROR_OK;
 }
 
-static int imx27_command(struct nand_device *nand, uint8_t command)
+static int mxc_command(struct nand_device *nand, uint8_t command)
 {
-       struct mx2_nf_controller *mx2_nf_info = nand->controller_priv;
+       struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
        struct target *target = nand->target;
        int validate_target_result;
        int poll_result;
@@ -254,25 +254,25 @@ static int imx27_command(struct nand_device *nand, uint8_t command)
                /* set read point for data_read() and read_block_data() to
                 * spare area in SRAM buffer
                 */
-               in_sram_address = MX2_NF_SPARE_BUFFER0;
+               in_sram_address = MXC_NF_SPARE_BUFFER0;
                break;
        case NAND_CMD_READ1:
                command = NAND_CMD_READ0;
                /*
                 * offset == one half of page size
                 */
-               in_sram_address = MX2_NF_MAIN_BUFFER0 + (nand->page_size >> 1);
+               in_sram_address = MXC_NF_MAIN_BUFFER0 + (nand->page_size >> 1);
                break;
        default:
-               in_sram_address = MX2_NF_MAIN_BUFFER0;
+               in_sram_address = MXC_NF_MAIN_BUFFER0;
                break;
        }
 
-       target_write_u16(target, MX2_NF_FCMD, command);
+       target_write_u16(target, MXC_NF_FCMD, command);
        /*
-        * start command input operation (set MX2_NF_BIT_OP_DONE==0)
+        * start command input operation (set MXC_NF_BIT_OP_DONE==0)
         */
-       target_write_u16(target, MX2_NF_CFG2, MX2_NF_BIT_OP_FCI);
+       target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_OP_FCI);
        poll_result = poll_for_complete_op(target, "command");
        if (poll_result != ERROR_OK)
                return poll_result;
@@ -283,28 +283,28 @@ static int imx27_command(struct nand_device *nand, uint8_t command)
        /* Handle special read command and adjust NF_CFG2(FDO) */
        switch (command) {
        case NAND_CMD_READID:
-               mx2_nf_info->optype = MX2_NF_DATAOUT_NANDID;
-               mx2_nf_info->fin = MX2_NF_FIN_DATAOUT;
+               mxc_nf_info->optype = MXC_NF_DATAOUT_NANDID;
+               mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
                break;
        case NAND_CMD_STATUS:
-               mx2_nf_info->optype = MX2_NF_DATAOUT_NANDSTATUS;
-               mx2_nf_info->fin = MX2_NF_FIN_DATAOUT;
-               target_write_u16 (target, MX2_NF_BUFADDR, 0);
+               mxc_nf_info->optype = MXC_NF_DATAOUT_NANDSTATUS;
+               mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
+               target_write_u16 (target, MXC_NF_BUFADDR, 0);
                in_sram_address = 0;
                break;
        case NAND_CMD_READ0:
-               mx2_nf_info->fin = MX2_NF_FIN_DATAOUT;
-               mx2_nf_info->optype = MX2_NF_DATAOUT_PAGE;
+               mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
+               mxc_nf_info->optype = MXC_NF_DATAOUT_PAGE;
                break;
        default:
                /* Ohter command use the default 'One page data out' FDO */
-               mx2_nf_info->optype = MX2_NF_DATAOUT_PAGE;
+               mxc_nf_info->optype = MXC_NF_DATAOUT_PAGE;
                break;
        }
        return ERROR_OK;
 }
 
-static int imx27_address(struct nand_device *nand, uint8_t address)
+static int mxc_address(struct nand_device *nand, uint8_t address)
 {
        struct target *target = nand->target;
        int validate_target_result;
@@ -316,11 +316,11 @@ static int imx27_address(struct nand_device *nand, uint8_t address)
        if (validate_target_result != ERROR_OK)
                return validate_target_result;
 
-       target_write_u16(target, MX2_NF_FADDR, address);
+       target_write_u16(target, MXC_NF_FADDR, address);
        /*
-        * start address input operation (set MX2_NF_BIT_OP_DONE==0)
+        * start address input operation (set MXC_NF_BIT_OP_DONE==0)
         */
-       target_write_u16(target, MX2_NF_CFG2, MX2_NF_BIT_OP_FAI);
+       target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_OP_FAI);
        poll_result = poll_for_complete_op(target, "address");
        if (poll_result != ERROR_OK)
                return poll_result;
@@ -328,7 +328,7 @@ static int imx27_address(struct nand_device *nand, uint8_t address)
        return ERROR_OK;
 }
 
-static int imx27_nand_ready(struct nand_device *nand, int tout)
+static int mxc_nand_ready(struct nand_device *nand, int tout)
 {
        uint16_t poll_complete_status;
        struct target *target = nand->target;
@@ -342,8 +342,8 @@ static int imx27_nand_ready(struct nand_device *nand, int tout)
                return validate_target_result;
 
        do {
-               target_read_u16(target, MX2_NF_CFG2, &poll_complete_status);
-               if (poll_complete_status & MX2_NF_BIT_OP_DONE)
+               target_read_u16(target, MXC_NF_CFG2, &poll_complete_status);
+               if (poll_complete_status & MXC_NF_BIT_OP_DONE)
                        return tout;
 
                alive_sleep(1);
@@ -352,11 +352,11 @@ static int imx27_nand_ready(struct nand_device *nand, int tout)
        return tout;
 }
 
-static int imx27_write_page(struct nand_device *nand, uint32_t page,
+static int mxc_write_page(struct nand_device *nand, uint32_t page,
                                                        uint8_t *data, uint32_t data_size,
                                                        uint8_t *oob, uint32_t oob_size)
 {
-       struct mx2_nf_controller *mx2_nf_info = nand->controller_priv;
+       struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
        struct target *target = nand->target;
        int retval;
        uint16_t nand_status_content;
@@ -381,19 +381,19 @@ static int imx27_write_page(struct nand_device *nand, uint32_t page,
        if (retval != ERROR_OK)
                return retval;
 
-       in_sram_address = MX2_NF_MAIN_BUFFER0;
+       in_sram_address = MXC_NF_MAIN_BUFFER0;
        sign_of_sequental_byte_read = 0;
        retval = ERROR_OK;
-       retval |= imx27_command(nand, NAND_CMD_SEQIN);
-       retval |= imx27_address(nand, 0); /* col */
-       retval |= imx27_address(nand, 0); /* col */
-       retval |= imx27_address(nand, page & 0xff); /* page address */
-       retval |= imx27_address(nand, (page >> 8) & 0xff); /* page address */
-       retval |= imx27_address(nand, (page >> 16) & 0xff); /* page address */
-
-       target_write_buffer(target, MX2_NF_MAIN_BUFFER0, data_size, data);
+       retval |= mxc_command(nand, NAND_CMD_SEQIN);
+       retval |= mxc_address(nand, 0); /* col */
+       retval |= mxc_address(nand, 0); /* col */
+       retval |= mxc_address(nand, page & 0xff); /* page address */
+       retval |= mxc_address(nand, (page >> 8) & 0xff); /* page address */
+       retval |= mxc_address(nand, (page >> 16) & 0xff); /* page address */
+
+       target_write_buffer(target, MXC_NF_MAIN_BUFFER0, data_size, data);
        if (oob) {
-               if (mx2_nf_info->flags.hw_ecc_enabled) {
+               if (mxc_nf_info->flags.hw_ecc_enabled) {
                        /*
                         * part of spare block will be overrided by hardware
                         * ECC generator
@@ -401,48 +401,48 @@ static int imx27_write_page(struct nand_device *nand, uint32_t page,
                        LOG_DEBUG("part of spare block will be overrided "
                                  "by hardware ECC generator");
                }
-               target_write_buffer(target, MX2_NF_SPARE_BUFFER0, oob_size,     oob);
+               target_write_buffer(target, MXC_NF_SPARE_BUFFER0, oob_size,     oob);
        }
-       /* BI-swap -  work-around of imx27 NFC for NAND device with page == 2kb */
-       target_read_u16(target, MX2_NF_MAIN_BUFFER3 + 464, &swap1);
+       /* BI-swap -  work-around of mxc NFC for NAND device with page == 2kb */
+       target_read_u16(target, MXC_NF_MAIN_BUFFER3 + 464, &swap1);
        if (oob) {
-               LOG_ERROR("Due to NFC Bug, oob is not correctly implemented in mx2 driver");
+               LOG_ERROR("Due to NFC Bug, oob is not correctly implemented in mxc driver");
                return ERROR_NAND_OPERATION_FAILED;
        }
        swap2 = 0xffff;  /* Spare buffer unused forced to 0xffff */
        new_swap1 = (swap1 & 0xFF00) | (swap2 >> 8);
        swap2 = (swap1 << 8) | (swap2 & 0xFF);
 
-       target_write_u16(target, MX2_NF_MAIN_BUFFER3 + 464, new_swap1);
-       target_write_u16(target, MX2_NF_SPARE_BUFFER3 + 4, swap2);
+       target_write_u16(target, MXC_NF_MAIN_BUFFER3 + 464, new_swap1);
+       target_write_u16(target, MXC_NF_SPARE_BUFFER3 + 4, swap2);
        /*
-        * start data input operation (set MX2_NF_BIT_OP_DONE==0)
+        * start data input operation (set MXC_NF_BIT_OP_DONE==0)
         */
-       target_write_u16(target, MX2_NF_BUFADDR, 0);
-       target_write_u16(target, MX2_NF_CFG2, MX2_NF_BIT_OP_FDI);
+       target_write_u16(target, MXC_NF_BUFADDR, 0);
+       target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_OP_FDI);
        poll_result = poll_for_complete_op(target, "data input");
        if (poll_result != ERROR_OK)
                return poll_result;
 
-       target_write_u16(target, MX2_NF_BUFADDR, 1);
-       target_write_u16(target, MX2_NF_CFG2, MX2_NF_BIT_OP_FDI);
+       target_write_u16(target, MXC_NF_BUFADDR, 1);
+       target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_OP_FDI);
        poll_result = poll_for_complete_op(target, "data input");
        if (poll_result != ERROR_OK)
                return poll_result;
 
-       target_write_u16(target, MX2_NF_BUFADDR, 2);
-       target_write_u16(target, MX2_NF_CFG2, MX2_NF_BIT_OP_FDI);
+       target_write_u16(target, MXC_NF_BUFADDR, 2);
+       target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_OP_FDI);
        poll_result = poll_for_complete_op(target, "data input");
        if (poll_result != ERROR_OK)
                return poll_result;
 
-       target_write_u16(target, MX2_NF_BUFADDR, 3);
-       target_write_u16(target, MX2_NF_CFG2, MX2_NF_BIT_OP_FDI);
+       target_write_u16(target, MXC_NF_BUFADDR, 3);
+       target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_OP_FDI);
        poll_result = poll_for_complete_op(target, "data input");
        if (poll_result != ERROR_OK)
                return poll_result;
 
-       retval |= imx27_command(nand, NAND_CMD_PAGEPROG);
+       retval |= mxc_command(nand, NAND_CMD_PAGEPROG);
        if (retval != ERROR_OK)
                return retval;
 
@@ -450,33 +450,33 @@ static int imx27_write_page(struct nand_device *nand, uint32_t page,
         * check status register
         */
        retval = ERROR_OK;
-       retval |= imx27_command(nand, NAND_CMD_STATUS);
-       target_write_u16 (target, MX2_NF_BUFADDR, 0);
-       mx2_nf_info->optype = MX2_NF_DATAOUT_NANDSTATUS;
-       mx2_nf_info->fin = MX2_NF_FIN_DATAOUT;
+       retval |= mxc_command(nand, NAND_CMD_STATUS);
+       target_write_u16 (target, MXC_NF_BUFADDR, 0);
+       mxc_nf_info->optype = MXC_NF_DATAOUT_NANDSTATUS;
+       mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
        retval |= do_data_output(nand);
        if (retval != ERROR_OK) {
                LOG_ERROR(get_status_register_err_msg);
                return retval;
        }
-       target_read_u16(target, MX2_NF_MAIN_BUFFER0, &nand_status_content);
+       target_read_u16(target, MXC_NF_MAIN_BUFFER0, &nand_status_content);
        if (nand_status_content & 0x0001) {
                /*
                 * page not correctly written
                 */
                return ERROR_NAND_OPERATION_FAILED;
        }
-#ifdef _MX2_PRINT_STAT
+#ifdef _MXC_PRINT_STAT
        LOG_INFO("%d bytes newly written", data_size);
 #endif
        return ERROR_OK;
 }
 
-static int imx27_read_page(struct nand_device *nand, uint32_t page,
+static int mxc_read_page(struct nand_device *nand, uint32_t page,
                                                   uint8_t *data, uint32_t data_size,
                                                   uint8_t *oob, uint32_t oob_size)
 {
-       struct mx2_nf_controller *mx2_nf_info = nand->controller_priv;
+       struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
        struct target *target = nand->target;
        int retval;
        uint16_t swap1, swap2, new_swap1;
@@ -497,65 +497,65 @@ static int imx27_read_page(struct nand_device *nand, uint32_t page,
        if (retval != ERROR_OK) {
                return retval;
        }
-       /* Reset address_cycles before imx27_command ?? */
-       retval = imx27_command(nand, NAND_CMD_READ0);
+       /* Reset address_cycles before mxc_command ?? */
+       retval = mxc_command(nand, NAND_CMD_READ0);
        if (retval != ERROR_OK) return retval;
-       retval = imx27_address(nand, 0); /* col */
+       retval = mxc_address(nand, 0); /* col */
        if (retval != ERROR_OK) return retval;
-       retval = imx27_address(nand, 0); /* col */
+       retval = mxc_address(nand, 0); /* col */
        if (retval != ERROR_OK) return retval;
-       retval = imx27_address(nand, page & 0xff); /* page address */
+       retval = mxc_address(nand, page & 0xff); /* page address */
        if (retval != ERROR_OK) return retval;
-       retval = imx27_address(nand, (page >> 8) & 0xff); /* page address */
+       retval = mxc_address(nand, (page >> 8) & 0xff); /* page address */
        if (retval != ERROR_OK) return retval;
-       retval = imx27_address(nand, (page >> 16) & 0xff); /* page address */
+       retval = mxc_address(nand, (page >> 16) & 0xff); /* page address */
        if (retval != ERROR_OK) return retval;
-       retval = imx27_command(nand, NAND_CMD_READSTART);
+       retval = mxc_command(nand, NAND_CMD_READSTART);
        if (retval != ERROR_OK) return retval;
 
-       target_write_u16(target, MX2_NF_BUFADDR, 0);
-       mx2_nf_info->fin = MX2_NF_FIN_DATAOUT;
+       target_write_u16(target, MXC_NF_BUFADDR, 0);
+       mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
        retval = do_data_output(nand);
        if (retval != ERROR_OK) {
-               LOG_ERROR("MX2_NF : Error reading page 0");
+               LOG_ERROR("MXC_NF : Error reading page 0");
                return retval;
        }
        /* Test nand page size to know how much MAIN_BUFFER must be written */
-       target_write_u16(target, MX2_NF_BUFADDR, 1);
-       mx2_nf_info->fin = MX2_NF_FIN_DATAOUT;
+       target_write_u16(target, MXC_NF_BUFADDR, 1);
+       mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
        retval = do_data_output(nand);
        if (retval != ERROR_OK) {
-               LOG_ERROR("MX2_NF : Error reading page 1");
+               LOG_ERROR("MXC_NF : Error reading page 1");
                return retval;
        }
-       target_write_u16(target, MX2_NF_BUFADDR, 2);
-       mx2_nf_info->fin = MX2_NF_FIN_DATAOUT;
+       target_write_u16(target, MXC_NF_BUFADDR, 2);
+       mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
        retval = do_data_output(nand);
        if (retval != ERROR_OK) {
-               LOG_ERROR("MX2_NF : Error reading page 2");
+               LOG_ERROR("MXC_NF : Error reading page 2");
                return retval;
        }
-       target_write_u16(target, MX2_NF_BUFADDR, 3);
-       mx2_nf_info->fin = MX2_NF_FIN_DATAOUT;
+       target_write_u16(target, MXC_NF_BUFADDR, 3);
+       mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
        retval = do_data_output(nand);
        if (retval != ERROR_OK) {
-               LOG_ERROR("MX2_NF : Error reading page 3");
+               LOG_ERROR("MXC_NF : Error reading page 3");
                return retval;
        }
-       /* BI-swap -  work-around of imx27 NFC for NAND device with page == 2k */
-       target_read_u16(target, MX2_NF_MAIN_BUFFER3 + 464, &swap1);
-       target_read_u16(target, MX2_NF_SPARE_BUFFER3 + 4, &swap2);
+       /* BI-swap -  work-around of mxc NFC for NAND device with page == 2k */
+       target_read_u16(target, MXC_NF_MAIN_BUFFER3 + 464, &swap1);
+       target_read_u16(target, MXC_NF_SPARE_BUFFER3 + 4, &swap2);
        new_swap1 = (swap1 & 0xFF00) | (swap2 >> 8);
        swap2 = (swap1 << 8) | (swap2 & 0xFF);
-       target_write_u16(target, MX2_NF_MAIN_BUFFER3 + 464, new_swap1);
-       target_write_u16(target, MX2_NF_SPARE_BUFFER3 + 4, swap2);
+       target_write_u16(target, MXC_NF_MAIN_BUFFER3 + 464, new_swap1);
+       target_write_u16(target, MXC_NF_SPARE_BUFFER3 + 4, swap2);
 
        if (data)
-               target_read_buffer(target, MX2_NF_MAIN_BUFFER0, data_size, data);
+               target_read_buffer(target, MXC_NF_MAIN_BUFFER0, data_size, data);
        if (oob)
-               target_read_buffer(target, MX2_NF_SPARE_BUFFER0, oob_size, oob);
+               target_read_buffer(target, MXC_NF_SPARE_BUFFER0, oob_size, oob);
 
-#ifdef _MX2_PRINT_STAT
+#ifdef _MXC_PRINT_STAT
        if (data_size > 0) {
                /* When Operation Status is read (when page is erased),
                 * this function is used but data_size is null.
@@ -568,33 +568,33 @@ static int imx27_read_page(struct nand_device *nand, uint32_t page,
 
 static int initialize_nf_controller(struct nand_device *nand)
 {
-       struct mx2_nf_controller *mx2_nf_info = nand->controller_priv;
+       struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
        struct target *target = nand->target;
        uint16_t work_mode;
        uint16_t temp;
        /*
         * resets NAND flash controller in zero time ? I dont know.
         */
-       target_write_u16(target, MX2_NF_CFG1, MX2_NF_BIT_RESET_EN);
-       work_mode = MX2_NF_BIT_INT_DIS; /* disable interrupt */
+       target_write_u16(target, MXC_NF_CFG1, MXC_NF_BIT_RESET_EN);
+       work_mode = MXC_NF_BIT_INT_DIS; /* disable interrupt */
        if (target->endianness == TARGET_BIG_ENDIAN) {
-               LOG_DEBUG("MX2_NF : work in Big Endian mode");
-               work_mode |= MX2_NF_BIT_BE_EN;
+               LOG_DEBUG("MXC_NF : work in Big Endian mode");
+               work_mode |= MXC_NF_BIT_BE_EN;
        } else {
-               LOG_DEBUG("MX2_NF : work in Little Endian mode");
+               LOG_DEBUG("MXC_NF : work in Little Endian mode");
        }
-       if (mx2_nf_info->flags.hw_ecc_enabled) {
-               LOG_DEBUG("MX2_NF : work with ECC mode");
-               work_mode |= MX2_NF_BIT_ECC_EN;
+       if (mxc_nf_info->flags.hw_ecc_enabled) {
+               LOG_DEBUG("MXC_NF : work with ECC mode");
+               work_mode |= MXC_NF_BIT_ECC_EN;
        } else {
-               LOG_DEBUG("MX2_NF : work without ECC mode");
+               LOG_DEBUG("MXC_NF : work without ECC mode");
        }
-       target_write_u16(target, MX2_NF_CFG1, work_mode);
+       target_write_u16(target, MXC_NF_CFG1, work_mode);
        /*
         * unlock SRAM buffer for write; 2 mean "Unlock", other values means "Lock"
         */
-       target_write_u16(target, MX2_NF_BUFCFG, 2);
-       target_read_u16(target, MX2_NF_FWP, &temp);
+       target_write_u16(target, MXC_NF_BUFCFG, 2);
+       target_read_u16(target, MXC_NF_FWP, &temp);
        if ((temp & 0x0007) == 1) {
                LOG_ERROR("NAND flash is tight-locked, reset needed");
                return ERROR_FAIL;
@@ -603,17 +603,17 @@ static int initialize_nf_controller(struct nand_device *nand)
        /*
         * unlock NAND flash for write
         */
-       target_write_u16(target, MX2_NF_FWP, 4);
-       target_write_u16(target, MX2_NF_LOCKSTART, 0x0000);
-       target_write_u16(target, MX2_NF_LOCKEND, 0xFFFF);
+       target_write_u16(target, MXC_NF_FWP, 4);
+       target_write_u16(target, MXC_NF_LOCKSTART, 0x0000);
+       target_write_u16(target, MXC_NF_LOCKEND, 0xFFFF);
        /*
         * 0x0000 means that first SRAM buffer @0xD800_0000 will be used
         */
-       target_write_u16(target, MX2_NF_BUFADDR, 0x0000);
+       target_write_u16(target, MXC_NF_BUFADDR, 0x0000);
        /*
         * address of SRAM buffer
         */
-       in_sram_address = MX2_NF_MAIN_BUFFER0;
+       in_sram_address = MXC_NF_MAIN_BUFFER0;
        sign_of_sequental_byte_read = 0;
        return ERROR_OK;
 }
@@ -628,7 +628,7 @@ static int get_next_byte_from_sram_buffer(struct target *target, uint8_t *value)
        if (sign_of_sequental_byte_read == 0)
                even_byte = 0;
 
-       if (in_sram_address > MX2_NF_LAST_BUFFER_ADDR) {
+       if (in_sram_address > MXC_NF_LAST_BUFFER_ADDR) {
                LOG_ERROR(sram_buffer_bounds_err_msg, in_sram_address);
                *value = 0;
                sign_of_sequental_byte_read = 0;
@@ -651,7 +651,7 @@ static int get_next_byte_from_sram_buffer(struct target *target, uint8_t *value)
 
 static int get_next_halfword_from_sram_buffer(struct target *target, uint16_t *value)
 {
-       if (in_sram_address > MX2_NF_LAST_BUFFER_ADDR) {
+       if (in_sram_address > MXC_NF_LAST_BUFFER_ADDR) {
                LOG_ERROR(sram_buffer_bounds_err_msg, in_sram_address);
                *value = 0;
                return ERROR_NAND_OPERATION_FAILED;
@@ -666,13 +666,13 @@ static int poll_for_complete_op(struct target *target, const char *text)
 {
        uint16_t poll_complete_status;
        for (int poll_cycle_count = 0; poll_cycle_count < 100; poll_cycle_count++) {
-               target_read_u16(target, MX2_NF_CFG2, &poll_complete_status);
-               if (poll_complete_status & MX2_NF_BIT_OP_DONE)
+               target_read_u16(target, MXC_NF_CFG2, &poll_complete_status);
+               if (poll_complete_status & MXC_NF_BIT_OP_DONE)
                        break;
 
                usleep(10);
        }
-       if (!(poll_complete_status & MX2_NF_BIT_OP_DONE)) {
+       if (!(poll_complete_status & MXC_NF_BIT_OP_DONE)) {
                LOG_ERROR("%s sending timeout", text);
                return ERROR_NAND_OPERATION_FAILED;
        }
@@ -681,7 +681,7 @@ static int poll_for_complete_op(struct target *target, const char *text)
 
 static int validate_target_state(struct nand_device *nand)
 {
-       struct mx2_nf_controller *mx2_nf_info = nand->controller_priv;
+       struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
        struct target *target = nand->target;
 
        if (target->state != TARGET_HALTED) {
@@ -689,7 +689,7 @@ static int validate_target_state(struct nand_device *nand)
                return ERROR_NAND_OPERATION_FAILED;
        }
 
-       if (mx2_nf_info->flags.target_little_endian !=
+       if (mxc_nf_info->flags.target_little_endian !=
            (target->endianness == TARGET_LITTLE_ENDIAN)) {
                /*
                 * endianness changed after NAND controller probed
@@ -701,26 +701,27 @@ static int validate_target_state(struct nand_device *nand)
 
 static int do_data_output(struct nand_device *nand)
 {
-       struct mx2_nf_controller *mx2_nf_info = nand->controller_priv;
+       struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
        struct target *target = nand->target;
        int poll_result;
        uint16_t ecc_status;
-       switch (mx2_nf_info->fin) {
-       case MX2_NF_FIN_DATAOUT:
+       switch (mxc_nf_info->fin) {
+       case MXC_NF_FIN_DATAOUT:
                /*
-                * start data output operation (set MX2_NF_BIT_OP_DONE==0)
+                * start data output operation (set MXC_NF_BIT_OP_DONE==0)
                 */
-               target_write_u16(target, MX2_NF_CFG2, MX2_NF_BIT_DATAOUT_TYPE(mx2_nf_info->optype));
+               target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_DATAOUT_TYPE(mxc_nf_info->optype));
                poll_result = poll_for_complete_op(target, "data output");
                if (poll_result != ERROR_OK)
                        return poll_result;
 
-               mx2_nf_info->fin = MX2_NF_FIN_NONE;
+               mxc_nf_info->fin = MXC_NF_FIN_NONE;
                /*
                 * ECC stuff
                 */
-               if ((mx2_nf_info->optype == MX2_NF_DATAOUT_PAGE) && mx2_nf_info->flags.hw_ecc_enabled) {
-                       target_read_u16(target, MX2_NF_ECCSTATUS, &ecc_status);
+               if ((mxc_nf_info->optype == MXC_NF_DATAOUT_PAGE) &&
+                       mxc_nf_info->flags.hw_ecc_enabled) {
+                       target_read_u16(target, MXC_NF_ECCSTATUS, &ecc_status);
                        switch (ecc_status & 0x000c) {
                        case 1 << 2:
                                LOG_INFO("main area readed with 1 (correctable) error");
@@ -741,22 +742,22 @@ static int do_data_output(struct nand_device *nand)
                        }
                }
                break;
-       case MX2_NF_FIN_NONE:
+       case MXC_NF_FIN_NONE:
                break;
        }
        return ERROR_OK;
 }
 
-struct nand_flash_controller imx27_nand_flash_controller = {
-       .name                                   = "imx27",
-       .nand_device_command    = &imx27_nand_device_command,
-       .init                                   = &imx27_init,
-       .reset                                  = &imx27_reset,
-       .command                                = &imx27_command,
-       .address                                = &imx27_address,
-       .write_data                             = &imx27_write_data,
-       .read_data                              = &imx27_read_data,
-       .write_page                             = &imx27_write_page,
-       .read_page                              = &imx27_read_page,
-       .nand_ready                             = &imx27_nand_ready,
+struct nand_flash_controller mxc_nand_flash_controller = {
+       .name                                   = "mxc",
+       .nand_device_command    = &mxc_nand_device_command,
+       .init                                   = &mxc_init,
+       .reset                                  = &mxc_reset,
+       .command                                = &mxc_command,
+       .address                                = &mxc_address,
+       .write_data                             = &mxc_write_data,
+       .read_data                              = &mxc_read_data,
+       .write_page                             = &mxc_write_page,
+       .read_page                              = &mxc_read_page,
+       .nand_ready                             = &mxc_nand_ready,
 };
index 1a85bc75dc1b37d5b9d582cfbce1f0b9f41fc2df..411d70ef195a6ed54489364fa17a1342159198b5 100644 (file)
  ***************************************************************************/
 
 /*
- * Freescale iMX2* OpenOCD NAND Flash controller support.
- * based on Freescale iMX3* OpenOCD NAND Flash controller support.
+ * Freescale iMX OpenOCD NAND Flash controller support.
+ * based on Freescale iMX2* and iMX3* OpenOCD NAND Flash controller support.
  *
  * Many thanks to Ben Dooks for writing s3c24xx driver.
  */
 
-#define                MX2_NF_BASE_ADDR                        0xd8000000
-#define                MX2_NF_BUFSIZ                           (MX2_NF_BASE_ADDR + 0xe00)
-#define                MX2_NF_BUFADDR                          (MX2_NF_BASE_ADDR + 0xe04)
-#define                MX2_NF_FADDR                            (MX2_NF_BASE_ADDR + 0xe06)
-#define                MX2_NF_FCMD                                     (MX2_NF_BASE_ADDR + 0xe08)
-#define                MX2_NF_BUFCFG                           (MX2_NF_BASE_ADDR + 0xe0a)
-#define                MX2_NF_ECCSTATUS                        (MX2_NF_BASE_ADDR + 0xe0c)
-#define                MX2_NF_ECCMAINPOS                       (MX2_NF_BASE_ADDR + 0xe0e)
-#define                MX2_NF_ECCSPAREPOS                      (MX2_NF_BASE_ADDR + 0xe10)
-#define                MX2_NF_FWP                                      (MX2_NF_BASE_ADDR + 0xe12)
-#define                MX2_NF_LOCKSTART                        (MX2_NF_BASE_ADDR + 0xe14)
-#define                MX2_NF_LOCKEND                          (MX2_NF_BASE_ADDR + 0xe16)
-#define                MX2_NF_FWPSTATUS                        (MX2_NF_BASE_ADDR + 0xe18)
+#define                MXC_NF_BASE_ADDR                        0xd8000000
+#define                MXC_NF_BUFSIZ                           (MXC_NF_BASE_ADDR + 0xe00)
+#define                MXC_NF_BUFADDR                          (MXC_NF_BASE_ADDR + 0xe04)
+#define                MXC_NF_FADDR                            (MXC_NF_BASE_ADDR + 0xe06)
+#define                MXC_NF_FCMD                                     (MXC_NF_BASE_ADDR + 0xe08)
+#define                MXC_NF_BUFCFG                           (MXC_NF_BASE_ADDR + 0xe0a)
+#define                MXC_NF_ECCSTATUS                        (MXC_NF_BASE_ADDR + 0xe0c)
+#define                MXC_NF_ECCMAINPOS                       (MXC_NF_BASE_ADDR + 0xe0e)
+#define                MXC_NF_ECCSPAREPOS                      (MXC_NF_BASE_ADDR + 0xe10)
+#define                MXC_NF_FWP                                      (MXC_NF_BASE_ADDR + 0xe12)
+#define                MXC_NF_LOCKSTART                        (MXC_NF_BASE_ADDR + 0xe14)
+#define                MXC_NF_LOCKEND                          (MXC_NF_BASE_ADDR + 0xe16)
+#define                MXC_NF_FWPSTATUS                        (MXC_NF_BASE_ADDR + 0xe18)
  /*
   * all bits not marked as self-clearing bit
   */
-#define                MX2_NF_CFG1                                     (MX2_NF_BASE_ADDR + 0xe1a)
-#define                MX2_NF_CFG2                                     (MX2_NF_BASE_ADDR + 0xe1c)
+#define                MXC_NF_CFG1                                     (MXC_NF_BASE_ADDR + 0xe1a)
+#define                MXC_NF_CFG2                                     (MXC_NF_BASE_ADDR + 0xe1c)
 
-#define                MX2_NF_MAIN_BUFFER0                     (MX2_NF_BASE_ADDR + 0x0000)
-#define                MX2_NF_MAIN_BUFFER1                     (MX2_NF_BASE_ADDR + 0x0200)
-#define                MX2_NF_MAIN_BUFFER2                     (MX2_NF_BASE_ADDR + 0x0400)
-#define                MX2_NF_MAIN_BUFFER3                     (MX2_NF_BASE_ADDR + 0x0600)
-#define                MX2_NF_SPARE_BUFFER0            (MX2_NF_BASE_ADDR + 0x0800)
-#define                MX2_NF_SPARE_BUFFER1            (MX2_NF_BASE_ADDR + 0x0810)
-#define                MX2_NF_SPARE_BUFFER2            (MX2_NF_BASE_ADDR + 0x0820)
-#define                MX2_NF_SPARE_BUFFER3            (MX2_NF_BASE_ADDR + 0x0830)
-#define                MX2_NF_MAIN_BUFFER_LEN          512
-#define                MX2_NF_SPARE_BUFFER_LEN         16
-#define                MX2_NF_LAST_BUFFER_ADDR         ((MX2_NF_SPARE_BUFFER3) + \
-       MX2_NF_SPARE_BUFFER_LEN - 2)
+#define                MXC_NF_MAIN_BUFFER0                     (MXC_NF_BASE_ADDR + 0x0000)
+#define                MXC_NF_MAIN_BUFFER1                     (MXC_NF_BASE_ADDR + 0x0200)
+#define                MXC_NF_MAIN_BUFFER2                     (MXC_NF_BASE_ADDR + 0x0400)
+#define                MXC_NF_MAIN_BUFFER3                     (MXC_NF_BASE_ADDR + 0x0600)
+#define                MXC_NF_SPARE_BUFFER0            (MXC_NF_BASE_ADDR + 0x0800)
+#define                MXC_NF_SPARE_BUFFER1            (MXC_NF_BASE_ADDR + 0x0810)
+#define                MXC_NF_SPARE_BUFFER2            (MXC_NF_BASE_ADDR + 0x0820)
+#define                MXC_NF_SPARE_BUFFER3            (MXC_NF_BASE_ADDR + 0x0830)
+#define                MXC_NF_MAIN_BUFFER_LEN          512
+#define                MXC_NF_SPARE_BUFFER_LEN         16
+#define                MXC_NF_LAST_BUFFER_ADDR         ((MXC_NF_SPARE_BUFFER3) + \
+       MXC_NF_SPARE_BUFFER_LEN - 2)
 
-/* bits in MX2_NF_CFG1 register */
-#define                MX2_NF_BIT_SPARE_ONLY_EN        (1<<2)
-#define                MX2_NF_BIT_ECC_EN                       (1<<3)
-#define                MX2_NF_BIT_INT_DIS                      (1<<4)
-#define                MX2_NF_BIT_BE_EN                        (1<<5)
-#define                MX2_NF_BIT_RESET_EN                     (1<<6)
-#define                MX2_NF_BIT_FORCE_CE                     (1<<7)
+/* bits in MXC_NF_CFG1 register */
+#define                MXC_NF_BIT_SPARE_ONLY_EN        (1<<2)
+#define                MXC_NF_BIT_ECC_EN                       (1<<3)
+#define                MXC_NF_BIT_INT_DIS                      (1<<4)
+#define                MXC_NF_BIT_BE_EN                        (1<<5)
+#define                MXC_NF_BIT_RESET_EN                     (1<<6)
+#define                MXC_NF_BIT_FORCE_CE                     (1<<7)
 
-/* bits in MX2_NF_CFG2 register */
+/* bits in MXC_NF_CFG2 register */
 
 /*Flash Command Input*/
-#define                MX2_NF_BIT_OP_FCI                       (1<<0)
+#define                MXC_NF_BIT_OP_FCI                       (1<<0)
  /*
   * Flash Address Input
   */
-#define                MX2_NF_BIT_OP_FAI                       (1<<1)
+#define                MXC_NF_BIT_OP_FAI                       (1<<1)
  /*
   * Flash Data Input
   */
-#define                MX2_NF_BIT_OP_FDI                       (1<<2)
+#define                MXC_NF_BIT_OP_FDI                       (1<<2)
 
 /* see "enum mx_dataout_type" below */
-#define                MX2_NF_BIT_DATAOUT_TYPE(x)      ((x)<<3)
-#define                MX2_NF_BIT_OP_DONE                      (1<<15)
+#define                MXC_NF_BIT_DATAOUT_TYPE(x)      ((x)<<3)
+#define                MXC_NF_BIT_OP_DONE                      (1<<15)
 
-#define                MX2_CCM_CGR2                            0x53f80028
-#define                MX2_GPR                                         0x43fac008
-/*#define              MX2_PCSR                                        0x53f8000c*/
-#define                MX2_FMCR                                        0x10027814
-#define                MX2_FMCR_NF_16BIT_SEL           (1<<4)
-#define                MX2_FMCR_NF_FMS                         (1<<5)
+#define                MXC_CCM_CGR2                            0x53f80028
+#define                MXC_GPR                                         0x43fac008
+/*#define              MXC_PCSR                                        0x53f8000c*/
+#define                MXC_FMCR                                        0x10027814
+#define                MXC_FMCR_NF_16BIT_SEL           (1<<4)
+#define                MXC_FMCR_NF_FMS                         (1<<5)
 
-enum mx_dataout_type {
-       MX2_NF_DATAOUT_PAGE = 1,
-       MX2_NF_DATAOUT_NANDID = 2,
-       MX2_NF_DATAOUT_NANDSTATUS = 4,
+enum mxc_dataout_type {
+       MXC_NF_DATAOUT_PAGE = 1,
+       MXC_NF_DATAOUT_NANDID = 2,
+       MXC_NF_DATAOUT_NANDSTATUS = 4,
 };
 
-enum mx_nf_finalize_action {
-       MX2_NF_FIN_NONE,
-       MX2_NF_FIN_DATAOUT,
+enum mxc_nf_finalize_action {
+       MXC_NF_FIN_NONE,
+       MXC_NF_FIN_DATAOUT,
 };
 
-struct mx2_nf_flags {
+struct mxc_nf_flags {
        unsigned host_little_endian:1;
        unsigned target_little_endian:1;
        unsigned nand_readonly:1;
@@ -110,8 +110,8 @@ struct mx2_nf_flags {
        unsigned hw_ecc_enabled:1;
 };
 
-struct mx2_nf_controller {
-       enum mx_dataout_type optype;
-       enum mx_nf_finalize_action fin;
-       struct mx2_nf_flags flags;
+struct mxc_nf_controller {
+       enum mxc_dataout_type optype;
+       enum mxc_nf_finalize_action fin;
+       struct mxc_nf_flags flags;
 };
index 962788cbdefecb71a03af80b2128955b30f9a88c..3b92ec5a0a59b792de7196ca9feff3b1255509b8 100644 (file)
@@ -61,4 +61,4 @@ proc tx27_init { } {
        nand probe 0
 }
 
-nand device tx27.nand imx27 $_TARGETNAME hwecc
+nand device tx27.nand mxc $_TARGETNAME hwecc