--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2012 by George Harris *
+ * george@luminairecoffee.com *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "imp.h"
+#include "spi.h"
+#include <jtag/jtag.h>
+#include <helper/time_support.h>
+#include <target/algorithm.h>
+#include <target/armv7m.h>
+
+/* Offsets from ssp_base into config & data registers */
+#define SSP_CR0 (0x00) /* Control register 0 */
+#define SSP_CR1 (0x04) /* Control register 1 */
+#define SSP_DATA (0x08) /* Data register (TX and RX) */
+#define SSP_SR (0x0C) /* Status register */
+#define SSP_CPSR (0x10) /* Clock prescale register */
+
+/* Status register fields */
+#define SSP_BSY (0x00000010)
+
+/* Timeout in ms */
+#define SSP_CMD_TIMEOUT (100)
+#define SSP_PROBE_TIMEOUT (100)
+#define SSP_MAX_TIMEOUT (3000)
+
+struct lpcspifi_flash_bank {
+ int probed;
+ uint32_t ssp_base;
+ uint32_t io_base;
+ uint32_t ioconfig_base;
+ uint32_t bank_num;
+ uint32_t max_spi_clock_mhz;
+ struct flash_device *dev;
+};
+
+struct lpcspifi_target {
+ char *name;
+ uint32_t tap_idcode;
+ uint32_t spifi_base;
+ uint32_t ssp_base;
+ uint32_t io_base;
+ uint32_t ioconfig_base; /* base address for the port word pin registers */
+};
+
+static struct lpcspifi_target target_devices[] = {
+ /* name, tap_idcode, spifi_base, ssp_base, io_base, ioconfig_base */
+ { "LPC43xx/18xx", 0x4ba00477, 0x14000000, 0x40083000, 0x400F4000, 0x40086000 },
+ { NULL, 0, 0, 0, 0, 0 }
+};
+
+/* flash_bank lpcspifi <base> <size> <chip_width> <bus_width> <target>
+ */
+FLASH_BANK_COMMAND_HANDLER(lpcspifi_flash_bank_command)
+{
+ struct lpcspifi_flash_bank *lpcspifi_info;
+
+ if (CMD_ARGC < 6)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ lpcspifi_info = malloc(sizeof(struct lpcspifi_flash_bank));
+ if (lpcspifi_info == NULL) {
+ LOG_ERROR("not enough memory");
+ return ERROR_FAIL;
+ }
+
+ bank->driver_priv = lpcspifi_info;
+ lpcspifi_info->probed = 0;
+
+ return ERROR_OK;
+}
+
+static inline int ioconfig_write_reg(struct target *target, uint32_t ioconfig_base, uint32_t offset, uint32_t value)
+{
+ return target_write_u32(target, ioconfig_base + offset, value);
+}
+
+static inline int ssp_write_reg(struct target *target, uint32_t ssp_base, uint32_t offset, uint32_t value)
+{
+ return target_write_u32(target, ssp_base + offset, value);
+}
+
+static inline int io_write_reg(struct target *target, uint32_t io_base, uint32_t offset, uint32_t value)
+{
+ return target_write_u32(target, io_base + offset, value);
+}
+
+static inline int ssp_read_reg(struct target *target, uint32_t ssp_base, uint32_t offset, uint32_t *value)
+{
+ return target_read_u32(target, ssp_base + offset, value);
+}
+
+static int ssp_setcs(struct target *target, uint32_t io_base, unsigned int value)
+{
+ return io_write_reg(target, io_base, 0x12ac, value ? 0xffffffff : 0x00000000);
+}
+
+/* Poll the SSP busy flag. When this comes back as 0, the transfer is complete
+ * and the controller is idle. */
+static int poll_ssp_busy(struct target *target, uint32_t ssp_base, int timeout)
+{
+ long long endtime;
+ uint32_t value;
+ int retval;
+
+ retval = ssp_read_reg(target, ssp_base, SSP_SR, &value);
+ if ((retval == ERROR_OK) && (value & SSP_BSY) == 0)
+ return ERROR_OK;
+ else if (retval != ERROR_OK)
+ return retval;
+
+ endtime = timeval_ms() + timeout;
+ do {
+ alive_sleep(1);
+ retval = ssp_read_reg(target, ssp_base, SSP_SR, &value);
+ if ((retval == ERROR_OK) && (value & SSP_BSY) == 0)
+ return ERROR_OK;
+ else if (retval != ERROR_OK)
+ return retval;
+ } while (timeval_ms() < endtime);
+
+ LOG_ERROR("Timeout while polling BSY");
+ return ERROR_FLASH_OPERATION_FAILED;
+}
+
+/* Un-initialize the ssp module and initialize the SPIFI module */
+static int lpcspifi_set_hw_mode(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ uint32_t ssp_base = lpcspifi_info->ssp_base;
+ struct armv7m_algorithm armv7m_info;
+ struct working_area *spifi_init_algorithm;
+ struct reg_param reg_params[1];
+ int retval = ERROR_OK;
+
+ LOG_DEBUG("Uninitializing LPC43xx SSP");
+ /* Turn off the SSP module */
+ retval = ssp_write_reg(target, ssp_base, SSP_CR1, 0x00000000);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* see contrib/loaders/flash/lpcspifi_init.S for src */
+ static const uint8_t spifi_init_code[] = {
+ 0x4f, 0xea, 0x00, 0x08, 0xa1, 0xb0, 0x00, 0xaf,
+ 0x4f, 0xf4, 0xc0, 0x43, 0xc4, 0xf2, 0x08, 0x03,
+ 0x4f, 0xf0, 0xf3, 0x02, 0xc3, 0xf8, 0x8c, 0x21,
+ 0x4f, 0xf4, 0xc0, 0x43, 0xc4, 0xf2, 0x08, 0x03,
+ 0x4f, 0xf4, 0xc0, 0x42, 0xc4, 0xf2, 0x08, 0x02,
+ 0x4f, 0xf4, 0xc0, 0x41, 0xc4, 0xf2, 0x08, 0x01,
+ 0x4f, 0xf4, 0xc0, 0x40, 0xc4, 0xf2, 0x08, 0x00,
+ 0x4f, 0xf0, 0xd3, 0x04, 0xc0, 0xf8, 0x9c, 0x41,
+ 0x20, 0x46, 0xc1, 0xf8, 0x98, 0x01, 0x01, 0x46,
+ 0xc2, 0xf8, 0x94, 0x11, 0xc3, 0xf8, 0x90, 0x11,
+ 0x4f, 0xf4, 0xc0, 0x43, 0xc4, 0xf2, 0x08, 0x03,
+ 0x4f, 0xf0, 0x13, 0x02, 0xc3, 0xf8, 0xa0, 0x21,
+ 0x40, 0xf2, 0x18, 0x13, 0xc1, 0xf2, 0x40, 0x03,
+ 0x1b, 0x68, 0x1c, 0x68, 0x40, 0xf2, 0xb4, 0x30,
+ 0xc1, 0xf2, 0x00, 0x00, 0x4f, 0xf0, 0x03, 0x01,
+ 0x4f, 0xf0, 0xc0, 0x02, 0x4f, 0xea, 0x08, 0x03,
+ 0xa0, 0x47, 0x00, 0xf0, 0x00, 0xb8, 0x00, 0xbe
+ };
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARMV7M_MODE_ANY;
+
+
+ LOG_DEBUG("Allocating working area for SPIFI init algorithm");
+ /* Get memory for spifi initialization algorithm */
+ retval = target_alloc_working_area(target, sizeof(spifi_init_code),
+ &spifi_init_algorithm);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Insufficient working area to initialize SPIFI "\
+ "module. You must allocate at least %zdB of working "\
+ "area in order to use this driver.",
+ sizeof(spifi_init_code)
+ );
+
+ return retval;
+ }
+
+ LOG_DEBUG("Writing algorithm to working area at 0x%08x",
+ spifi_init_algorithm->address);
+ /* Write algorithm to working area */
+ retval = target_write_buffer(target,
+ spifi_init_algorithm->address,
+ sizeof(spifi_init_code),
+ spifi_init_code
+ );
+
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, spifi_init_algorithm);
+ return retval;
+ }
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_OUT); /* spifi clk speed */
+
+ /* For now, the algorithm will set up the SPIFI module
+ * @ the IRC clock speed. In the future, it could be made
+ * a bit smarter to use other clock sources if the user has
+ * already configured them in order to speed up memory-
+ * mapped reads. */
+ buf_set_u32(reg_params[0].value, 0, 32, 12);
+
+ /* Run the algorithm */
+ LOG_DEBUG("Running SPIFI init algorithm");
+ retval = target_run_algorithm(target, 0 , NULL, 1, reg_params,
+ spifi_init_algorithm->address,
+ spifi_init_algorithm->address + sizeof(spifi_init_code) - 2,
+ 1000, &armv7m_info);
+
+ if (retval != ERROR_OK)
+ LOG_ERROR("Error executing SPIFI init algorithm");
+
+ target_free_working_area(target, spifi_init_algorithm);
+
+ destroy_reg_param(®_params[0]);
+
+ return retval;
+}
+
+/* Initialize the ssp module */
+static int lpcspifi_set_sw_mode(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ uint32_t ssp_base = lpcspifi_info->ssp_base;
+ uint32_t io_base = lpcspifi_info->io_base;
+ uint32_t ioconfig_base = lpcspifi_info->ioconfig_base;
+ int retval = ERROR_OK;
+
+ /* Re-initialize SPIFI. There are a couple of errata on this, so this makes
+ sure that nothing's in an unhappy state. */
+ retval = lpcspifi_set_hw_mode(bank);
+
+ /* If we couldn't initialize hardware mode, don't even bother continuing */
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Initialize the pins */
+ retval = ioconfig_write_reg(target, ioconfig_base, 0x194, 0x00000040);
+ if (retval == ERROR_OK)
+ retval = ioconfig_write_reg(target, ioconfig_base, 0x1a0, 0x00000044);
+ if (retval == ERROR_OK)
+ retval = ioconfig_write_reg(target, ioconfig_base, 0x190, 0x00000040);
+ if (retval == ERROR_OK)
+ retval = ioconfig_write_reg(target, ioconfig_base, 0x19c, 0x000000ed);
+ if (retval == ERROR_OK)
+ retval = ioconfig_write_reg(target, ioconfig_base, 0x198, 0x000000ed);
+ if (retval == ERROR_OK)
+ retval = ioconfig_write_reg(target, ioconfig_base, 0x18c, 0x000000ea);
+
+ /* Set CS high & as an output */
+ if (retval == ERROR_OK)
+ retval = io_write_reg(target, io_base, 0x12ac, 0xffffffff);
+ if (retval == ERROR_OK)
+ retval = io_write_reg(target, io_base, 0x2014, 0x00000800);
+
+ /* Initialize the module */
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_CR0, 0x00000007);
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_CR1, 0x00000000);
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_CPSR, 0x00000008);
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_CR1, 0x00000002);
+
+ /* If something didn't work out, attempt to return SPIFI to HW mode */
+ if (retval != ERROR_OK)
+ lpcspifi_set_hw_mode(bank);
+
+ return retval;
+}
+
+/* Read the status register of the external SPI flash chip. */
+static int read_status_reg(struct flash_bank *bank, uint32_t *status)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ uint32_t ssp_base = lpcspifi_info->ssp_base;
+ uint32_t io_base = lpcspifi_info->io_base;
+ uint32_t value;
+ int retval = ERROR_OK;
+
+ retval = ssp_setcs(target, io_base, 0);
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_DATA, SPIFLASH_READ_STATUS);
+ if (retval == ERROR_OK)
+ retval = poll_ssp_busy(target, ssp_base, SSP_CMD_TIMEOUT);
+ if (retval == ERROR_OK)
+ retval = ssp_read_reg(target, ssp_base, SSP_DATA, &value);
+ /* Dummy write to clock in the register */
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_DATA, 0x00);
+ if (retval == ERROR_OK)
+ retval = poll_ssp_busy(target, ssp_base, SSP_CMD_TIMEOUT);
+ if (retval == ERROR_OK)
+ retval = ssp_setcs(target, io_base, 1);
+
+ if (retval == ERROR_OK)
+ retval = ssp_read_reg(target, ssp_base, SSP_DATA, &value);
+ if (retval == ERROR_OK)
+ *status = value;
+
+ return retval;
+}
+
+/* check for BSY bit in flash status register */
+/* timeout in ms */
+static int wait_till_ready(struct flash_bank *bank, int timeout)
+{
+ uint32_t status;
+ int retval;
+ long long endtime;
+
+ endtime = timeval_ms() + timeout;
+ do {
+ /* read flash status register */
+ retval = read_status_reg(bank, &status);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if ((status & SPIFLASH_BSY_BIT) == 0)
+ return ERROR_OK;
+ alive_sleep(1);
+ } while (timeval_ms() < endtime);
+
+ LOG_ERROR("timeout waiting for flash to finish write/erase operation");
+ return ERROR_FAIL;
+}
+
+/* Send "write enable" command to SPI flash chip. */
+static int lpcspifi_write_enable(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ uint32_t ssp_base = lpcspifi_info->ssp_base;
+ uint32_t io_base = lpcspifi_info->io_base;
+ uint32_t status, value;
+ int retval = ERROR_OK;
+
+ retval = ssp_setcs(target, io_base, 0);
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_DATA, SPIFLASH_WRITE_ENABLE);
+ if (retval == ERROR_OK)
+ retval = poll_ssp_busy(target, ssp_base, SSP_CMD_TIMEOUT);
+ if (retval == ERROR_OK)
+ retval = ssp_read_reg(target, ssp_base, SSP_DATA, &value);
+ if (retval == ERROR_OK)
+ retval = ssp_setcs(target, io_base, 1);
+
+ /* read flash status register */
+ if (retval == ERROR_OK)
+ retval = read_status_reg(bank, &status);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Check write enabled */
+ if ((status & SPIFLASH_WE_BIT) == 0) {
+ LOG_ERROR("Cannot enable write to flash. Status=0x%08" PRIx32, status);
+ return ERROR_FAIL;
+ }
+
+ return retval;
+}
+
+static int lpcspifi_bulk_erase(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ uint32_t ssp_base = lpcspifi_info->ssp_base;
+ uint32_t io_base = lpcspifi_info->io_base;
+ uint32_t value;
+ int retval = ERROR_OK;
+
+ retval = lpcspifi_set_sw_mode(bank);
+
+ if (retval == ERROR_OK)
+ retval = lpcspifi_write_enable(bank);
+
+ /* send SPI command "bulk erase" */
+ if (retval == ERROR_OK)
+ ssp_setcs(target, io_base, 0);
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_DATA, lpcspifi_info->dev->chip_erase_cmd);
+ if (retval == ERROR_OK)
+ retval = poll_ssp_busy(target, ssp_base, SSP_CMD_TIMEOUT);
+ if (retval == ERROR_OK)
+ retval = ssp_read_reg(target, ssp_base, SSP_DATA, &value);
+ if (retval == ERROR_OK)
+ retval = ssp_setcs(target, io_base, 1);
+
+ /* poll flash BSY for self-timed bulk erase */
+ if (retval == ERROR_OK)
+ retval = wait_till_ready(bank, bank->num_sectors*SSP_MAX_TIMEOUT);
+
+ return retval;
+}
+
+static int lpcspifi_erase(struct flash_bank *bank, int first, int last)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ struct reg_param reg_params[4];
+ struct armv7m_algorithm armv7m_info;
+ struct working_area *erase_algorithm;
+ int retval = ERROR_OK;
+ int sector;
+
+ LOG_DEBUG("erase from sector %d to sector %d", first, last);
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
+ LOG_ERROR("Flash sector invalid");
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ if (!(lpcspifi_info->probed)) {
+ LOG_ERROR("Flash bank not probed");
+ return ERROR_FLASH_BANK_NOT_PROBED;
+ }
+
+ for (sector = first; sector <= last; sector++) {
+ if (bank->sectors[sector].is_protected) {
+ LOG_ERROR("Flash sector %d protected", sector);
+ return ERROR_FAIL;
+ }
+ }
+
+ /* If we're erasing the entire chip and the flash supports
+ * it, use a bulk erase instead of going sector-by-sector. */
+ if (first == 0 && last == (bank->num_sectors - 1)
+ && lpcspifi_info->dev->chip_erase_cmd != lpcspifi_info->dev->erase_cmd) {
+ LOG_DEBUG("Chip supports the bulk erase command."\
+ " Will use bulk erase instead of sector-by-sector erase.");
+ retval = lpcspifi_bulk_erase(bank);
+
+ if (retval == ERROR_OK) {
+ retval = lpcspifi_set_hw_mode(bank);
+ return retval;
+ } else
+ LOG_WARNING("Bulk flash erase failed. Falling back to sector-by-sector erase.");
+ }
+
+ retval = lpcspifi_set_hw_mode(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* see contrib/loaders/flash/lpcspifi_erase.S for src */
+ static const uint8_t lpcspifi_flash_erase_code[] = {
+ 0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x08, 0x0a,
+ 0x4f, 0xf0, 0xea, 0x08, 0xca, 0xf8, 0x8c, 0x81,
+ 0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x90, 0x81,
+ 0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x94, 0x81,
+ 0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x98, 0x81,
+ 0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x9c, 0x81,
+ 0x4f, 0xf0, 0x44, 0x08, 0xca, 0xf8, 0xa0, 0x81,
+ 0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
+ 0x4f, 0xf4, 0x00, 0x68, 0xca, 0xf8, 0x14, 0x80,
+ 0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
+ 0x4f, 0xf0, 0xff, 0x08, 0xca, 0xf8, 0xab, 0x80,
+ 0x4f, 0xf0, 0x00, 0x0a, 0xc4, 0xf2, 0x05, 0x0a,
+ 0x4f, 0xf0, 0x00, 0x08, 0xc0, 0xf2, 0x00, 0x18,
+ 0xca, 0xf8, 0x94, 0x80, 0x4f, 0xf4, 0x00, 0x5a,
+ 0xc4, 0xf2, 0x05, 0x0a, 0x4f, 0xf0, 0x01, 0x08,
+ 0xca, 0xf8, 0x00, 0x87, 0x4f, 0xf4, 0x40, 0x5a,
+ 0xc4, 0xf2, 0x08, 0x0a, 0x4f, 0xf0, 0x07, 0x08,
+ 0xca, 0xf8, 0x00, 0x80, 0x4f, 0xf0, 0x02, 0x08,
+ 0xca, 0xf8, 0x10, 0x80, 0xca, 0xf8, 0x04, 0x80,
+ 0x00, 0xf0, 0x52, 0xf8, 0x4f, 0xf0, 0x06, 0x09,
+ 0x00, 0xf0, 0x3b, 0xf8, 0x00, 0xf0, 0x48, 0xf8,
+ 0x00, 0xf0, 0x4a, 0xf8, 0x4f, 0xf0, 0x05, 0x09,
+ 0x00, 0xf0, 0x33, 0xf8, 0x4f, 0xf0, 0x00, 0x09,
+ 0x00, 0xf0, 0x2f, 0xf8, 0x00, 0xf0, 0x3c, 0xf8,
+ 0x19, 0xf0, 0x02, 0x0f, 0x00, 0xf0, 0x45, 0x80,
+ 0x00, 0xf0, 0x3a, 0xf8, 0x4f, 0xea, 0x02, 0x09,
+ 0x00, 0xf0, 0x23, 0xf8, 0x4f, 0xea, 0x10, 0x49,
+ 0x00, 0xf0, 0x1f, 0xf8, 0x4f, 0xea, 0x10, 0x29,
+ 0x00, 0xf0, 0x1b, 0xf8, 0x4f, 0xea, 0x00, 0x09,
+ 0x00, 0xf0, 0x17, 0xf8, 0x00, 0xf0, 0x24, 0xf8,
+ 0x00, 0xf0, 0x26, 0xf8, 0x4f, 0xf0, 0x05, 0x09,
+ 0x00, 0xf0, 0x0f, 0xf8, 0x4f, 0xf0, 0x00, 0x09,
+ 0x00, 0xf0, 0x0b, 0xf8, 0x00, 0xf0, 0x18, 0xf8,
+ 0x19, 0xf0, 0x01, 0x0f, 0x7f, 0xf4, 0xf0, 0xaf,
+ 0x01, 0x39, 0xf9, 0xb1, 0x18, 0x44, 0xff, 0xf7,
+ 0xbf, 0xbf, 0x4f, 0xf4, 0x40, 0x5a, 0xc4, 0xf2,
+ 0x08, 0x0a, 0xca, 0xf8, 0x08, 0x90, 0xda, 0xf8,
+ 0x0c, 0x90, 0x19, 0xf0, 0x10, 0x0f, 0x7f, 0xf4,
+ 0xfa, 0xaf, 0xda, 0xf8, 0x08, 0x90, 0x70, 0x47,
+ 0x4f, 0xf0, 0xff, 0x08, 0x00, 0xf0, 0x02, 0xb8,
+ 0x4f, 0xf0, 0x00, 0x08, 0x4f, 0xf4, 0x80, 0x4a,
+ 0xc4, 0xf2, 0x0f, 0x0a, 0xca, 0xf8, 0xab, 0x80,
+ 0x70, 0x47, 0x00, 0x20, 0x00, 0xbe, 0xff, 0xff
+ };
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARMV7M_MODE_ANY;
+
+
+ /* Get memory for spifi initialization algorithm */
+ retval = target_alloc_working_area(target, sizeof(lpcspifi_flash_erase_code),
+ &erase_algorithm);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Insufficient working area. You must configure a working"\
+ " area of at least %zdB in order to erase SPIFI flash.",
+ sizeof(lpcspifi_flash_erase_code));
+ return retval;
+ }
+
+ /* Write algorithm to working area */
+ retval = target_write_buffer(target, erase_algorithm->address,
+ sizeof(lpcspifi_flash_erase_code), lpcspifi_flash_erase_code);
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, erase_algorithm);
+ return retval;
+ }
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* Start address */
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* Sector count */
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* Erase command */
+ init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* Sector size */
+
+ buf_set_u32(reg_params[0].value, 0, 32, bank->sectors[first].offset);
+ buf_set_u32(reg_params[1].value, 0, 32, last - first + 1);
+ buf_set_u32(reg_params[2].value, 0, 32, lpcspifi_info->dev->erase_cmd);
+ buf_set_u32(reg_params[3].value, 0, 32, bank->sectors[first].size);
+
+ /* Run the algorithm */
+ retval = target_run_algorithm(target, 0 , NULL, 4, reg_params,
+ erase_algorithm->address,
+ erase_algorithm->address + sizeof(lpcspifi_flash_erase_code) - 4,
+ 3000*(last - first + 1), &armv7m_info);
+
+ if (retval != ERROR_OK)
+ LOG_ERROR("Error executing flash erase algorithm");
+
+ target_free_working_area(target, erase_algorithm);
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+ destroy_reg_param(®_params[3]);
+
+ retval = lpcspifi_set_hw_mode(bank);
+
+ return retval;
+}
+
+static int lpcspifi_protect(struct flash_bank *bank, int set,
+ int first, int last)
+{
+ int sector;
+
+ for (sector = first; sector <= last; sector++)
+ bank->sectors[sector].is_protected = set;
+ return ERROR_OK;
+}
+
+static int lpcspifi_write(struct flash_bank *bank, uint8_t *buffer,
+ uint32_t offset, uint32_t count)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ uint32_t page_size, fifo_size;
+ struct working_area *fifo;
+ struct reg_param reg_params[5];
+ struct armv7m_algorithm armv7m_info;
+ struct working_area *write_algorithm;
+ int sector;
+ int retval = ERROR_OK;
+
+ LOG_DEBUG("offset=0x%08" PRIx32 " count=0x%08" PRIx32,
+ offset, count);
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (offset + count > lpcspifi_info->dev->size_in_bytes) {
+ LOG_WARNING("Writes past end of flash. Extra data discarded.");
+ count = lpcspifi_info->dev->size_in_bytes - offset;
+ }
+
+ /* Check sector protection */
+ for (sector = 0; sector < bank->num_sectors; sector++) {
+ /* Start offset in or before this sector? */
+ /* End offset in or behind this sector? */
+ if ((offset <
+ (bank->sectors[sector].offset + bank->sectors[sector].size))
+ && ((offset + count - 1) >= bank->sectors[sector].offset)
+ && bank->sectors[sector].is_protected) {
+ LOG_ERROR("Flash sector %d protected", sector);
+ return ERROR_FAIL;
+ }
+ }
+
+ page_size = lpcspifi_info->dev->pagesize;
+
+ retval = lpcspifi_set_hw_mode(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* see contrib/loaders/flash/lpcspifi_write.S for src */
+ static const uint8_t lpcspifi_flash_write_code[] = {
+ 0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x08, 0x0a,
+ 0x4f, 0xf0, 0xea, 0x08, 0xca, 0xf8, 0x8c, 0x81,
+ 0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x90, 0x81,
+ 0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x94, 0x81,
+ 0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x98, 0x81,
+ 0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x9c, 0x81,
+ 0x4f, 0xf0, 0x44, 0x08, 0xca, 0xf8, 0xa0, 0x81,
+ 0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
+ 0x4f, 0xf4, 0x00, 0x68, 0xca, 0xf8, 0x14, 0x80,
+ 0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
+ 0x4f, 0xf0, 0xff, 0x08, 0xca, 0xf8, 0xab, 0x80,
+ 0x4f, 0xf0, 0x00, 0x0a, 0xc4, 0xf2, 0x05, 0x0a,
+ 0x4f, 0xf0, 0x00, 0x08, 0xc0, 0xf2, 0x00, 0x18,
+ 0xca, 0xf8, 0x94, 0x80, 0x4f, 0xf4, 0x00, 0x5a,
+ 0xc4, 0xf2, 0x05, 0x0a, 0x4f, 0xf0, 0x01, 0x08,
+ 0xca, 0xf8, 0x00, 0x87, 0x4f, 0xf4, 0x40, 0x5a,
+ 0xc4, 0xf2, 0x08, 0x0a, 0x4f, 0xf0, 0x07, 0x08,
+ 0xca, 0xf8, 0x00, 0x80, 0x4f, 0xf0, 0x02, 0x08,
+ 0xca, 0xf8, 0x10, 0x80, 0xca, 0xf8, 0x04, 0x80,
+ 0x4f, 0xf0, 0x00, 0x0b, 0xa3, 0x44, 0x93, 0x45,
+ 0x7f, 0xf6, 0xfc, 0xaf, 0x00, 0xf0, 0x6a, 0xf8,
+ 0x4f, 0xf0, 0x06, 0x09, 0x00, 0xf0, 0x53, 0xf8,
+ 0x00, 0xf0, 0x60, 0xf8, 0x00, 0xf0, 0x62, 0xf8,
+ 0x4f, 0xf0, 0x05, 0x09, 0x00, 0xf0, 0x4b, 0xf8,
+ 0x4f, 0xf0, 0x00, 0x09, 0x00, 0xf0, 0x47, 0xf8,
+ 0x00, 0xf0, 0x54, 0xf8, 0x19, 0xf0, 0x02, 0x0f,
+ 0x00, 0xf0, 0x5d, 0x80, 0x00, 0xf0, 0x52, 0xf8,
+ 0x4f, 0xf0, 0x02, 0x09, 0x00, 0xf0, 0x3b, 0xf8,
+ 0x4f, 0xea, 0x12, 0x49, 0x00, 0xf0, 0x37, 0xf8,
+ 0x4f, 0xea, 0x12, 0x29, 0x00, 0xf0, 0x33, 0xf8,
+ 0x4f, 0xea, 0x02, 0x09, 0x00, 0xf0, 0x2f, 0xf8,
+ 0xd0, 0xf8, 0x00, 0x80, 0xb8, 0xf1, 0x00, 0x0f,
+ 0x00, 0xf0, 0x47, 0x80, 0x47, 0x68, 0x47, 0x45,
+ 0x3f, 0xf4, 0xf6, 0xaf, 0x17, 0xf8, 0x01, 0x9b,
+ 0x00, 0xf0, 0x21, 0xf8, 0x8f, 0x42, 0x28, 0xbf,
+ 0x00, 0xf1, 0x08, 0x07, 0x47, 0x60, 0x01, 0x3b,
+ 0xbb, 0xb3, 0x02, 0xf1, 0x01, 0x02, 0x93, 0x45,
+ 0x7f, 0xf4, 0xe6, 0xaf, 0x00, 0xf0, 0x22, 0xf8,
+ 0xa3, 0x44, 0x00, 0xf0, 0x23, 0xf8, 0x4f, 0xf0,
+ 0x05, 0x09, 0x00, 0xf0, 0x0c, 0xf8, 0x4f, 0xf0,
+ 0x00, 0x09, 0x00, 0xf0, 0x08, 0xf8, 0x00, 0xf0,
+ 0x15, 0xf8, 0x19, 0xf0, 0x01, 0x0f, 0x7f, 0xf4,
+ 0xf0, 0xaf, 0xff, 0xf7, 0xa7, 0xbf, 0x4f, 0xf4,
+ 0x40, 0x5a, 0xc4, 0xf2, 0x08, 0x0a, 0xca, 0xf8,
+ 0x08, 0x90, 0xda, 0xf8, 0x0c, 0x90, 0x19, 0xf0,
+ 0x10, 0x0f, 0x7f, 0xf4, 0xfa, 0xaf, 0xda, 0xf8,
+ 0x08, 0x90, 0x70, 0x47, 0x4f, 0xf0, 0xff, 0x08,
+ 0x00, 0xf0, 0x02, 0xb8, 0x4f, 0xf0, 0x00, 0x08,
+ 0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
+ 0xca, 0xf8, 0xab, 0x80, 0x70, 0x47, 0x00, 0x20,
+ 0x50, 0x60, 0x30, 0x46, 0x00, 0xbe, 0xff, 0xff
+ };
+
+ if (target_alloc_working_area(target, sizeof(lpcspifi_flash_write_code),
+ &write_algorithm) != ERROR_OK) {
+ LOG_ERROR("Insufficient working area. You must configure"\
+ " a working area > %zdB in order to write to SPIFI flash.",
+ sizeof(lpcspifi_flash_write_code));
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ };
+
+ retval = target_write_buffer(target, write_algorithm->address,
+ sizeof(lpcspifi_flash_write_code),
+ lpcspifi_flash_write_code);
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
+ return retval;
+ }
+
+ /* FIFO allocation */
+ fifo_size = target_get_working_area_avail(target);
+
+ if (fifo_size == 0) {
+ /* if we already allocated the writing code but failed to get fifo
+ * space, free the algorithm */
+ target_free_working_area(target, write_algorithm);
+
+ LOG_ERROR("Insufficient working area. Please allocate at least"\
+ " %zdB of working area to enable flash writes.",
+ sizeof(lpcspifi_flash_write_code) + 1
+ );
+
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ } else if (fifo_size < page_size)
+ LOG_WARNING("Working area size is limited; flash writes may be"\
+ " slow. Increase working area size to at least %zdB"\
+ " to reduce write times.",
+ sizeof(lpcspifi_flash_write_code) + page_size
+ );
+ else if (fifo_size > 0x2000) /* Beyond this point, we start to get diminishing returns */
+ fifo_size = 0x2000;
+
+ if (target_alloc_working_area(target, fifo_size, &fifo) != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ };
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARMV7M_MODE_ANY;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer end */
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* target address */
+ init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* count (halfword-16bit) */
+ init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* page size */
+
+ buf_set_u32(reg_params[0].value, 0, 32, fifo->address);
+ buf_set_u32(reg_params[1].value, 0, 32, fifo->address + fifo->size);
+ buf_set_u32(reg_params[2].value, 0, 32, offset);
+ buf_set_u32(reg_params[3].value, 0, 32, count);
+ buf_set_u32(reg_params[4].value, 0, 32, page_size);
+
+ retval = target_run_flash_async_algorithm(target, buffer, count, 1,
+ 0, NULL,
+ 5, reg_params,
+ fifo->address, fifo->size,
+ write_algorithm->address, 0,
+ &armv7m_info
+ );
+
+ if (retval != ERROR_OK)
+ LOG_ERROR("Error executing flash write algorithm");
+
+ target_free_working_area(target, fifo);
+ target_free_working_area(target, write_algorithm);
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+ destroy_reg_param(®_params[3]);
+ destroy_reg_param(®_params[4]);
+
+ /* Switch to HW mode before return to prompt */
+ retval = lpcspifi_set_hw_mode(bank);
+ return retval;
+}
+
+/* Return ID of flash device */
+/* On exit, SW mode is kept */
+static int lpcspifi_read_flash_id(struct flash_bank *bank, uint32_t *id)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ uint32_t ssp_base = lpcspifi_info->ssp_base;
+ uint32_t io_base = lpcspifi_info->io_base;
+ uint32_t value;
+ int retval;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ LOG_DEBUG("Getting ID");
+ retval = lpcspifi_set_sw_mode(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* poll WIP */
+ if (retval == ERROR_OK)
+ retval = wait_till_ready(bank, SSP_PROBE_TIMEOUT);
+
+ /* Send SPI command "read ID" */
+ if (retval == ERROR_OK)
+ retval = ssp_setcs(target, io_base, 0);
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_DATA, SPIFLASH_READ_ID);
+ if (retval == ERROR_OK)
+ retval = poll_ssp_busy(target, ssp_base, SSP_CMD_TIMEOUT);
+ if (retval == ERROR_OK)
+ retval = ssp_read_reg(target, ssp_base, SSP_DATA, &value);
+
+ /* Dummy write to clock in data */
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_DATA, 0x00);
+ if (retval == ERROR_OK)
+ retval = poll_ssp_busy(target, ssp_base, SSP_CMD_TIMEOUT);
+ if (retval == ERROR_OK)
+ retval = ssp_read_reg(target, ssp_base, SSP_DATA, &value);
+ if (retval == ERROR_OK)
+ ((uint8_t *)id)[0] = value;
+
+ /* Dummy write to clock in data */
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_DATA, 0x00);
+ if (retval == ERROR_OK)
+ retval = poll_ssp_busy(target, ssp_base, SSP_CMD_TIMEOUT);
+ if (retval == ERROR_OK)
+ retval = ssp_read_reg(target, ssp_base, SSP_DATA, &value);
+ if (retval == ERROR_OK)
+ ((uint8_t *)id)[1] = value;
+
+ /* Dummy write to clock in data */
+ if (retval == ERROR_OK)
+ retval = ssp_write_reg(target, ssp_base, SSP_DATA, 0x00);
+ if (retval == ERROR_OK)
+ retval = poll_ssp_busy(target, ssp_base, SSP_CMD_TIMEOUT);
+ if (retval == ERROR_OK)
+ retval = ssp_read_reg(target, ssp_base, SSP_DATA, &value);
+ if (retval == ERROR_OK)
+ ((uint8_t *)id)[2] = value;
+
+ if (retval == ERROR_OK)
+ retval = ssp_setcs(target, io_base, 1);
+
+ return retval;
+}
+
+static int lpcspifi_probe(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ uint32_t ssp_base;
+ uint32_t io_base;
+ uint32_t ioconfig_base;
+ struct flash_sector *sectors;
+ uint32_t id = 0; /* silence uninitialized warning */
+ struct lpcspifi_target *target_device;
+ int retval;
+
+ /* If we've already probed, we should be fine to skip this time. */
+ if (lpcspifi_info->probed)
+ return ERROR_OK;
+ lpcspifi_info->probed = 0;
+
+ for (target_device = target_devices ; target_device->name ; ++target_device)
+ if (target_device->tap_idcode == target->tap->idcode)
+ break;
+ if (!target_device->name) {
+ LOG_ERROR("Device ID 0x%" PRIx32 " is not known as SPIFI capable",
+ target->tap->idcode);
+ return ERROR_FAIL;
+ }
+
+ ssp_base = target_device->ssp_base;
+ io_base = target_device->io_base;
+ ioconfig_base = target_device->ioconfig_base;
+ lpcspifi_info->ssp_base = ssp_base;
+ lpcspifi_info->io_base = io_base;
+ lpcspifi_info->ioconfig_base = ioconfig_base;
+ lpcspifi_info->bank_num = bank->bank_number;
+
+ LOG_DEBUG("Valid SPIFI on device %s at address 0x%" PRIx32,
+ target_device->name, bank->base);
+
+ /* read and decode flash ID; returns in SW mode */
+ retval = lpcspifi_read_flash_id(bank, &id);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = lpcspifi_set_hw_mode(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ lpcspifi_info->dev = NULL;
+ for (struct flash_device *p = flash_devices; p->name ; p++)
+ if (p->device_id == id) {
+ lpcspifi_info->dev = p;
+ break;
+ }
+
+ if (!lpcspifi_info->dev) {
+ LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id);
+ return ERROR_FAIL;
+ }
+
+ LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")",
+ lpcspifi_info->dev->name, lpcspifi_info->dev->device_id);
+
+ /* Set correct size value */
+ bank->size = lpcspifi_info->dev->size_in_bytes;
+
+ /* create and fill sectors array */
+ bank->num_sectors =
+ lpcspifi_info->dev->size_in_bytes / lpcspifi_info->dev->sectorsize;
+ sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
+ if (sectors == NULL) {
+ LOG_ERROR("not enough memory");
+ return ERROR_FAIL;
+ }
+
+ for (int sector = 0; sector < bank->num_sectors; sector++) {
+ sectors[sector].offset = sector * lpcspifi_info->dev->sectorsize;
+ sectors[sector].size = lpcspifi_info->dev->sectorsize;
+ sectors[sector].is_erased = -1;
+ sectors[sector].is_protected = 1;
+ }
+
+ bank->sectors = sectors;
+
+ lpcspifi_info->probed = 1;
+ return ERROR_OK;
+}
+
+static int lpcspifi_auto_probe(struct flash_bank *bank)
+{
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+ if (lpcspifi_info->probed)
+ return ERROR_OK;
+ return lpcspifi_probe(bank);
+}
+
+static int lpcspifi_protect_check(struct flash_bank *bank)
+{
+ /* Nothing to do. Protection is only handled in SW. */
+ return ERROR_OK;
+}
+
+static int get_lpcspifi_info(struct flash_bank *bank, char *buf, int buf_size)
+{
+ struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
+
+ if (!(lpcspifi_info->probed)) {
+ snprintf(buf, buf_size,
+ "\nSPIFI flash bank not probed yet\n");
+ return ERROR_OK;
+ }
+
+ snprintf(buf, buf_size, "\nSPIFI flash information:\n"
+ " Device \'%s\' (ID 0x%08x)\n",
+ lpcspifi_info->dev->name, lpcspifi_info->dev->device_id);
+
+ return ERROR_OK;
+}
+
+struct flash_driver lpcspifi_flash = {
+ .name = "lpcspifi",
+ .flash_bank_command = lpcspifi_flash_bank_command,
+ .erase = lpcspifi_erase,
+ .protect = lpcspifi_protect,
+ .write = lpcspifi_write,
+ .read = default_flash_read,
+ .probe = lpcspifi_probe,
+ .auto_probe = lpcspifi_auto_probe,
+ .erase_check = default_flash_blank_check,
+ .protect_check = lpcspifi_protect_check,
+ .info = get_lpcspifi_info,
+};
projects / openocd / commitdiff