\r
Done!
\r
+Xilinx Platform Studio (XPS)\r
+Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4
+\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.
+\r
+At Local date and time: Tue Mar 04 08:56:51 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+****************************************************
+
+\r
+Creating system netlist for hardware specification..
+****************************************************
+platgen -p xc4vfx12ff668-10 -lang vhdl system.mhs
+
+\r
+\r
+Release Xilinx EDK 8.2.02 - platgen EDK_Im_Sp2.4\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+\r
+
+\r
+\r
+Command Line: platgen -p xc4vfx12ff668-10 -lang vhdl system.mhs \r
+\r
+Parse system.mhs ...\r
+\r
+Read MPD definitions ...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/ppc405_virtex4_v1_01_a/data\r
+/ppc405_virtex4_v2_1_0.tcl ...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/jtagppc_cntlr_v2_00_a/data/\r
+jtagppc_cntlr_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_v34_v1_02_a/data/plb_v3\r
+4_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb2opb_bridge_v1_01_a/data\r
+/plb2opb_bridge_v2_1_0.tcl ...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_emc_v2_00_a/data/plb_em\r
+c_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_bram_if_cntlr_v1_00_b/d\r
+ata/plb_bram_if_cntlr_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/opb_intc_v1_00_c/data/opb_i\r
+ntc_v2_1_0.tcl ...
+\r
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm\r
+_module_v2_1_0.tcl ...\r
+\r
+Overriding IP level properties ...\r
+jtagppc_cntlr (jtagppc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\jtagppc_cntlr_v2_00_a\data\\r
+jtagppc_cntlr_v2_1_0.mpd line 36 - tool overriding c_device value X2VP4 to\r
+4vfx12\r
+plb2opb_bridge (plb2opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb2opb_bridge_v1_01_a\data\r
+\plb2opb_bridge_v2_1_0.mpd line 39 - tool overriding c_family value virtex2p to\r
+virtex4\r
+opb_gpio (leds_4bit) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_g\r
+pio_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex4\r
+opb_gpio (leds_positions) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_g\r
+pio_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex4\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 43 - tool overriding c_family value virtex2 to virtex4\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 38 - tool overriding c_family value virtex2 to virtex4\r
+dcm_module (dcm_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm\r
+_module_v2_1_0.mpd line 61 - tool overriding c_family value virtex2 to virtex4\r
+\r
+Performing IP level DRCs on properties...\r
+\r
+Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/emc_common_v2_00_a/data/emc\r
+_common_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/\r
+bram_if_cntlr_v2_1_0.tcl ...\r
+
+\r
+Address Map for Processor ppc405_0\r
+ (0x00000000-0x000fffff) SRAM_256Kx32 plb\r
+ (0x40000000-0x4000ffff) LEDs_4Bit plb->plb2opb->opb\r
+ (0x40020000-0x4002ffff) LEDs_Positions plb->plb2opb->opb\r
+ (0x40600000-0x4060ffff) RS232_Uart plb->plb2opb->opb\r
+ (0x41200000-0x4120ffff) opb_intc_0 plb->plb2opb->opb\r
+ (0xfffff000-0xffffffff) plb_bram_if_cntlr_1 plb\r
+\r
+Check platform address map ...\r
+\r
+Overriding system level properties ...\r
+plb_v34 (plb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_v34_v1_02_a\data\plb_v3\r
+4_v2_1_0.mpd line 42 - tool overriding c_plb_num_masters value 4 to 2\r
+plb_v34 (plb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_v34_v1_02_a\data\plb_v3\r
+4_v2_1_0.mpd line 43 - tool overriding c_plb_num_slaves value 4 to 3\r
+plb_v34 (plb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_v34_v1_02_a\data\plb_v3\r
+4_v2_1_0.mpd line 44 - tool overriding c_plb_mid_width value 2 to 1\r
+opb_v20 (opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v2\r
+0_v2_1_0.mpd line 40 - tool overriding c_num_masters value 4 to 1\r
+plb2opb_bridge (plb2opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb2opb_bridge_v1_01_a\data\r
+\plb2opb_bridge_v2_1_0.mpd line 51 - tool overriding c_plb_num_masters value 4\r
+to 2\r
+plb2opb_bridge (plb2opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb2opb_bridge_v1_01_a\data\r
+\plb2opb_bridge_v2_1_0.mpd line 52 - tool overriding c_plb_mid_width value 4 to\r
+1\r
+plb_emc (sram_256kx32) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_emc_v2_00_a\data\plb_em\r
+c_v2_1_0.mpd line 39 - tool overriding c_num_masters value 8 to 2\r
+plb_emc (sram_256kx32) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_emc_v2_00_a\data\plb_em\r
+c_v2_1_0.mpd line 97 - tool overriding c_plb_mid_width value 3 to 1\r
+plb_bram_if_cntlr (plb_bram_if_cntlr_1) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_bram_if_cntlr_v1_00_b\d\r
+ata\plb_bram_if_cntlr_v2_1_0.mpd line 43 - tool overriding c_num_masters value 8\r
+to 2\r
+plb_bram_if_cntlr (plb_bram_if_cntlr_1) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_bram_if_cntlr_v1_00_b\d\r
+ata\plb_bram_if_cntlr_v2_1_0.mpd line 50 - tool overriding c_plb_mid_width value\r
+3 to 1\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 39 - tool overriding c_memsize value 2048 to 0x1000\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 40 - tool overriding c_port_dwidth value 32 to 64\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 42 - tool overriding c_num_we value 4 to 8\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 46 - tool overriding c_num_intr_inputs value 2 to 1\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 47 - tool overriding c_kind_of_intr value\r
+0b11111111111111111111111111111111 to 0b00000000000000000000000000000001\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 48 - tool overriding c_kind_of_edge value\r
+0b11111111111111111111111111111111 to 0b00000000000000000000000000000001\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 49 - tool overriding c_kind_of_lvl value\r
+0b11111111111111111111111111111111 to 0b00000000000000000000000000000000\r
+\r
+Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/intc_core_v1_00_c/data/intc\r
+_core_v2_1_0.tcl ...
+\r
+\r
+\r
+Performing System level DRCs on properties...\r
+\r
+Check platform configuration ...\r
+plb_v34 (plb) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line 85\r
+- 2 master(s) : 3 slave(s)\r
+opb_v20 (opb) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line 94\r
+- 1 master(s) : 4 slave(s)\r
+\r
+Check port drivers...\r
+Performing Clock DRCs...\r
+\r
+Running UPDATE Tcl procedures for OPTION PLATGEN_SYSLEVEL_UPDATE_PROC...\r
+\r
+Modify defaults ...\r
+\r
+Creating stub ...\r
+
+\r
+\r
+Processing licensed instances ...\r
+Completion time: 0.00 seconds\r
+\r
+Creating hardware output directories ...\r
+
+\r
+\r
+Managing hardware (BBD-specified) netlist files ...\r
+\r
+Managing cache ...\r
+\r
+Elaborating instances ...\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+195 - elaborating IP\r
+\r
+Writing HDL for elaborated instances ...\r
+
+\r
+\r
+Inserting wrapper level ...\r
+
+\r
+Completion time: 1.00 seconds\r
+\r
+Constructing platform-level connectivity ...\r
+
+\r
+Completion time: 0.00 seconds\r
+\r
+Writing (top-level) BMM ...\r
+\r
+Writing (top-level and wrappers) HDL ...\r
+
+\r
+\r
+Generating synthesis project file ...\r
+
+\r
+\r
+Running XST synthesis ...\r
+INFO:MDT - The following instances are synthesized with XST. The MPD option\r
+ IMP_NETLIST=TRUE indicates that a NGC file is to be produced using XST\r
+ synthesis. IMP_NETLIST=FALSE (default) instances are not synthesized.\r
+ppc405_0_wrapper (ppc405_0) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line 46\r
+- Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+jtagppc_0_wrapper (jtagppc_0) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line 63\r
+- Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+reset_block_wrapper (reset_block) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line 69\r
+- Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+plb_wrapper (plb) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line 85\r
+- Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+opb_wrapper (opb) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line 94\r
+- Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+plb2opb_wrapper (plb2opb) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+102 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+rs232_uart_wrapper (rs232_uart) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+113 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+leds_4bit_wrapper (leds_4bit) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+129 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+leds_positions_wrapper (leds_positions) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+142 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+sram_256kx32_wrapper (sram_256kx32) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+155 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+plb_bram_if_cntlr_1_wrapper (plb_bram_if_cntlr_1) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+184 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+plb_bram_if_cntlr_1_bram_wrapper (plb_bram_if_cntlr_1_bram) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+195 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+opb_intc_0_wrapper (opb_intc_0) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+201 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+sram_256kx32_util_bus_split_0_wrapper (sram_256kx32_util_bus_split_0) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+211 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+dcm_0_wrapper (dcm_0) -\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system.mhs line\r
+221 - Running XST synthesis\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+\r
+Running NGCBUILD ...\r
+\r
+Rebuilding cache ...\r
+
+\r
+Total run time: 429.00 seconds\r
+
+\r
+Running synthesis...
+bash -c "cd synthesis; ./synthesis.sh"
+
+\r
+./synthesis.sh: line 2: $'\r': command not found
+
+\r
+./synthesis.sh: line 4: $'\r': command not found
+
+\r
+Release 8.2.02i - xst I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+ERROR:Xst:427 - Entry File system_xst.scr\r not found \r
+./synthesis.sh: line 11: syntax error: unexpected end of file
+make: *** [implementation/system.ngc] Error 2
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:04:50 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+Running synthesis...
+bash -c "cd synthesis; ./synthesis.sh"
+
+\r
+Release 8.2.02i - xst I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+-->
+\r
+WARNING:Xst:1530 - You are using an evaluation version of Xilinx Software. In 35\r
+ days, this program will not operate. For more information about this product,\r
+ please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local\r
+ Field Applications Engineer (FAE) or salesperson. If you have any questions,\r
+ or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+
+\r
+\r
+TABLE OF CONTENTS\r
+ 1) Synthesis Options Summary\r
+ 2) HDL Compilation\r
+ 3) Design Hierarchy Analysis\r
+ 4) HDL Analysis\r
+ 5) HDL Synthesis\r
+ 5.1) HDL Synthesis Report\r
+ 6) Advanced HDL Synthesis\r
+ 6.1) Advanced HDL Synthesis Report\r
+ 7) Low Level Synthesis\r
+ 8) Partition Report\r
+ 9) Final Report\r
+ 9.1) Device utilization summary\r
+ 9.2) TIMING REPORT\r
+\r
+\r
+=========================================================================\r
+* Synthesis Options Summary *\r
+=========================================================================\r
+---- Source Parameters\r
+Input Format : MIXED\r
+Input File Name : "system_xst.prj"\r
+\r
+---- Target Parameters\r
+Target Device : xc4vfx12ff668-10\r
+Output File Name : "../implementation/system.ngc"\r
+\r
+---- Source Options\r
+Top Module Name : system\r
+\r
+---- Target Options\r
+Add IO Buffers : YES\r
+Global Maximum Fanout : 10000\r
+\r
+---- General Options\r
+Optimization Goal : speed\r
+Optimization Effort : 1\r
+Hierarchy Separator : /\r
+\r
+---- Other Options\r
+Cores Search Directories : {../implementation}\r
+\r
+=========================================================================\r
+\r
+\r
+=========================================================================\r
+* HDL Compilation *\r
+=========================================================================\r
+
+\r
+Compiling vhdl file "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" in Library work.\r
+
+\r
+Entity <system> compiled.\r
+
+\r
+Entity <system> (Architecture <STRUCTURE>) compiled.\r
+
+\r
+\r
+=========================================================================\r
+* Design Hierarchy Analysis *\r
+=========================================================================\r
+Analyzing hierarchy for entity <system> in library <work> (architecture <STRUCTURE>).\r
+\r
+Building hierarchy successfully finished.\r
+\r
+=========================================================================\r
+* HDL Analysis *\r
+=========================================================================\r
+Analyzing Entity <system> in library <work> (Architecture <STRUCTURE>).\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1716: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1724: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1732: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1740: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1748: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1756: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1764: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1772: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1780: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1788: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1796: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1804: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1812: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1820: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1828: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1836: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1844: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1852: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1860: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1868: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1876: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1884: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1892: Instantiating black box module <IOBUF>.\r
+
+\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1900: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1908: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1916: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1924: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1932: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1940: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1948: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1956: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1964: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1972: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1980: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1988: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 1996: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 2004: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 2012: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 2020: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 2028: Instantiating black box module <IOBUF>.\r
+WARNING:Xst:2211 - "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd" line 2036: Instantiating black box module <IOBUF>.\r
+
+\r
+Entity <system> analyzed. Unit <system> generated.\r
+\r
+\r
+=========================================================================\r
+* HDL Synthesis *\r
+=========================================================================\r
+\r
+Performing bidirectional port resolution...\r
+
+\r
+\r
+Synthesizing Unit <system>.\r
+ Related source file is "C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/hdl/system.vhd".\r
+Unit <system> synthesized.\r
+\r
+\r
+=========================================================================\r
+HDL Synthesis Report\r
+\r
+Found no macro\r
+=========================================================================\r
+\r
+=========================================================================\r
+* Advanced HDL Synthesis *\r
+=========================================================================\r
+\r
+
+\r
+Loading device for application Rf_Device from file '4vfx12.nph' in environment c:\devtools\Xilinx.\r
+
+\r
+Reading core <../implementation/ppc405_0_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/jtagppc_0_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/reset_block_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/plb_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/opb_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/plb2opb_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/rs232_uart_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/leds_4bit_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/leds_positions_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/sram_256kx32_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/plb_bram_if_cntlr_1_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/plb_bram_if_cntlr_1_bram_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/opb_intc_0_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/sram_256kx32_util_bus_split_0_wrapper.ngc>.\r
+
+\r
+Reading core <../implementation/dcm_0_wrapper.ngc>.\r
+
+\r
+Loading core <ppc405_0_wrapper> for timing and area information for instance <ppc405_0>.\r
+Loading core <jtagppc_0_wrapper> for timing and area information for instance <jtagppc_0>.\r
+Loading core <reset_block_wrapper> for timing and area information for instance <reset_block>.\r
+
+\r
+Loading core <plb_wrapper> for timing and area information for instance <plb>.\r
+Loading core <opb_wrapper> for timing and area information for instance <opb>.\r
+Loading core <plb2opb_wrapper> for timing and area information for instance <plb2opb>.\r
+Loading core <rs232_uart_wrapper> for timing and area information for instance <rs232_uart>.\r
+Loading core <leds_4bit_wrapper> for timing and area information for instance <leds_4bit>.\r
+Loading core <leds_positions_wrapper> for timing and area information for instance <leds_positions>.\r
+Loading core <sram_256kx32_wrapper> for timing and area information for instance <sram_256kx32>.\r
+Loading core <plb_bram_if_cntlr_1_wrapper> for timing and area information for instance <plb_bram_if_cntlr_1>.\r
+Loading core <plb_bram_if_cntlr_1_bram_wrapper> for timing and area information for instance <plb_bram_if_cntlr_1_bram>.\r
+Loading core <opb_intc_0_wrapper> for timing and area information for instance <opb_intc_0>.\r
+Loading core <sram_256kx32_util_bus_split_0_wrapper> for timing and area information for instance <sram_256kx32_util_bus_split_0>.\r
+Loading core <dcm_0_wrapper> for timing and area information for instance <dcm_0>.\r
+
+\r
+\r
+=========================================================================\r
+Advanced HDL Synthesis Report\r
+\r
+Found no macro\r
+=========================================================================\r
+\r
+=========================================================================\r
+* Low Level Synthesis *\r
+=========================================================================\r
+
+\r
+WARNING:Xst:1902 - Value 0 for attribute SAVEDATA of instance ramb16_0 in unit plb_bram_if_cntlr_1_bram is not supported\r
+
+\r
+WARNING:Xst:1902 - Value 0 for attribute INVERT_CLK_DOA_REG of instance ramb16_0 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute INVERT_CLK_DOB_REG of instance ramb16_0 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute SAVEDATA of instance ramb16_1 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute INVERT_CLK_DOA_REG of instance ramb16_1 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute INVERT_CLK_DOB_REG of instance ramb16_1 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute CLKIN_DIVIDE_BY_2 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DUTY_CYCLE_CORRECTION of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute PMCD_SYNC of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute STARTUP_WAIT of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DCM_EXT_FB_EN of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DCM_UNUSED_TAPS_POWERDOWN of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DCM_VREG_ENABLE of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DCM_CLKDV_CLKFX_ALIGNMENT of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DCM_LOCK_HIGH of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_EARLY_LOCK of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_EXTEND_HALT_TIME of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_EXTEND_RUN_TIME of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_EXTEND_FLUSH_TIME of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_NON_STOP of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_SKIP_FINE of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DFS_EN_RELRST of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DLL_DESKEW_LOCK_BY1 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DLL_PERIOD_LOCK_BY1 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DLL_PHASE_DETECTOR_AUTO_RESET of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DLL_PHASE_SHIFT_LOCK_BY1 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DLL_CTL_SEL_CLKIN_DIV2 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+
+\r
+WARNING:Xst:1902 - Value 0 for attribute SAVEDATA of instance ramb16_0 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute INVERT_CLK_DOA_REG of instance ramb16_0 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute INVERT_CLK_DOB_REG of instance ramb16_0 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute SAVEDATA of instance ramb16_1 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute INVERT_CLK_DOA_REG of instance ramb16_1 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute INVERT_CLK_DOB_REG of instance ramb16_1 in unit plb_bram_if_cntlr_1_bram is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute CLKIN_DIVIDE_BY_2 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DUTY_CYCLE_CORRECTION of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute PMCD_SYNC of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute STARTUP_WAIT of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DCM_EXT_FB_EN of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DCM_UNUSED_TAPS_POWERDOWN of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DCM_VREG_ENABLE of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DCM_CLKDV_CLKFX_ALIGNMENT of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DCM_LOCK_HIGH of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_EARLY_LOCK of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_EXTEND_HALT_TIME of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_EXTEND_RUN_TIME of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_EXTEND_FLUSH_TIME of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_NON_STOP of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DFS_SKIP_FINE of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DFS_EN_RELRST of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DLL_DESKEW_LOCK_BY1 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DLL_PERIOD_LOCK_BY1 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 1 for attribute DLL_PHASE_DETECTOR_AUTO_RESET of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DLL_PHASE_SHIFT_LOCK_BY1 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+WARNING:Xst:1902 - Value 0 for attribute DLL_CTL_SEL_CLKIN_DIV2 of instance dcm_0/Using_DCM_ADV.DCM_ADV_INST in unit dcm_0 is not supported\r
+
+\r
+\r
+Optimizing unit <system> ...\r
+\r
+Mapping all equations...\r
+
+\r
+Building and optimizing final netlist ...\r
+
+\r
+INFO:Xst:2260 - The FF/Latch <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_0> in Unit <plb> is equivalent to the following 3 FFs/Latches : <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_0_1> <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_0_2> <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_0_3> \r
+INFO:Xst:2260 - The FF/Latch <plb/I_PLB_ARBITER_LOGIC/arbreset_i> in Unit <plb> is equivalent to the following 2 FFs/Latches : <plb/I_PLB_ARBITER_LOGIC/arbreset_i_1> <plb/I_PLB_ARBITER_LOGIC/arbreset_i_2> \r
+INFO:Xst:2260 - The FF/Latch <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_1> in Unit <plb> is equivalent to the following 3 FFs/Latches : <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_1_1> <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_1_2> <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_1_3> \r
+
+\r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[2].I_SIZE_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[2].I_SIZE_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/I_CACHLN_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/I_CACHLN_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[3].I_SIZE_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[3].I_SIZE_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/I_SNGL_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/I_SNGL_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/I_BURST_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/I_BURST_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/sl_busy> in Unit <plb_bram_if_cntlr_1> is equivalent to the following FF/Latch : <plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/sl_busy_1> \r
+INFO:Xst:2260 - The FF/Latch <opb_intc_0/INTC_CORE_I/IRQ_GEN_I/MASKED_INTS_REG_GEN[0].MASKED_INTS_REG_BIT_I> in Unit <opb_intc_0> is equivalent to the following FF/Latch : <opb_intc_0/INTC_CORE_I/REGS_I/OPT_REGS_I/IPR_GEN.IPR_REG_GEN[0].IPR_REG_BIT_I> \r
+INFO:Xst:2260 - The FF/Latch <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[0].INTC_DBUS_BIT_I> in Unit <opb_intc_0> is equivalent to the following 29 FFs/Latches : <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[1].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[2].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[3].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[4].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[5].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[6].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[7].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[8].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[9].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[10].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[11].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[12].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[13].INTC_DBUS_BIT_I>\r
+ <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[14].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[15].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[16].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[17].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[18].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[19].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[20].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[21].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[22].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[23].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[24].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[25].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[26].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[27].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[28].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[29].INTC_DBUS_BIT_I> \r
+
+\r
+INFO:Xst:2260 - The FF/Latch <opb_intc_0/INTC_CORE_I/REGS_I/OPT_REGS_I/IVR_GEN.IVR_REG_GEN[1].IVR_REG_BIT_I> in Unit <opb_intc_0> is equivalent to the following FF/Latch : <opb_intc_0/INTC_CORE_I/REGS_I/OPT_REGS_I/IVR_GEN.IVR_REG_GEN[0].IVR_REG_BIT_I> \r
+INFO:Xst:2260 - The FF/Latch <opb_intc_0/INTC_CORE_I/IRQ_GEN_I/MASKED_INTS_REG_GEN[1].MASKED_INTS_REG_BIT_I> in Unit <opb_intc_0> is equivalent to the following FF/Latch : <opb_intc_0/INTC_CORE_I/REGS_I/OPT_REGS_I/IPR_GEN.IPR_REG_GEN[1].IPR_REG_BIT_I> \r
+INFO:Xst:2260 - The FF/Latch <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_0> in Unit <plb> is equivalent to the following 3 FFs/Latches : <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_0_1> <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_0_2> <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_0_3> \r
+INFO:Xst:2260 - The FF/Latch <plb/I_PLB_ARBITER_LOGIC/arbreset_i> in Unit <plb> is equivalent to the following 2 FFs/Latches : <plb/I_PLB_ARBITER_LOGIC/arbreset_i_1> <plb/I_PLB_ARBITER_LOGIC/arbreset_i_2> \r
+INFO:Xst:2260 - The FF/Latch <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_1> in Unit <plb> is equivalent to the following 3 FFs/Latches : <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_1_1> <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_1_2> <plb/I_PLB_ARBITER_LOGIC/I_PRIORITY_ENCODER/I_ARBADDRSEL/arbAddrSelReg_i_1_3> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[2].I_SIZE_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[2].I_SIZE_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/I_CACHLN_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/I_CACHLN_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[3].I_SIZE_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[3].I_SIZE_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/I_SNGL_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/I_SNGL_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/I_BURST_S_H_REG> in Unit <sram_256kx32> is equivalent to the following FF/Latch : <sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/I_BURST_S_H_REG> \r
+INFO:Xst:2260 - The FF/Latch <plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/sl_busy> in Unit <plb_bram_if_cntlr_1> is equivalent to the following FF/Latch : <plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/sl_busy_1> \r
+INFO:Xst:2260 - The FF/Latch <opb_intc_0/INTC_CORE_I/IRQ_GEN_I/MASKED_INTS_REG_GEN[0].MASKED_INTS_REG_BIT_I> in Unit <opb_intc_0> is equivalent to the following FF/Latch : <opb_intc_0/INTC_CORE_I/REGS_I/OPT_REGS_I/IPR_GEN.IPR_REG_GEN[0].IPR_REG_BIT_I> \r
+INFO:Xst:2260 - The FF/Latch <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[0].INTC_DBUS_BIT_I> in Unit <opb_intc_0> is equivalent to the following 29 FFs/Latches : <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[1].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[2].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[3].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[4].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[5].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[6].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[7].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[8].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[9].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[10].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[11].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[12].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[13].INTC_DBUS_BIT_I>\r
+ <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[14].INTC
+\r
+_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[15].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[16].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[17].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[18].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[19].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[20].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[21].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[22].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[23].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[24].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[25].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[26].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[27].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[28].INTC_DBUS_BIT_I> <opb_intc_0/OPB_INTFC_I/INTC_DBUS_REG_GEN[29].INTC_DBUS_BIT_I> \r
+INFO:Xst:2260 - The FF/Latch <opb_intc_0/INTC_CORE_I/REGS_I/OPT_REGS_I/IVR_GEN.IVR_REG_GEN[1].IVR_REG_BIT_I> in Unit <opb_intc_0> is equivalent to the following FF/Latch : <opb_intc_0/INTC_CORE_I/REGS_I/OPT_REGS_I/IVR_GEN.IVR_REG_GEN[0].IVR_REG_BIT_I> \r
+INFO:Xst:2260 - The FF/Latch <opb_intc_0/INTC_CORE_I/IRQ_GEN_I/MASKED_INTS_REG_GEN[1].MASKED_INTS_REG_BIT_I> in Unit <opb_intc_0> is equivalent to the following FF/Latch : <opb_intc_0/INTC_CORE_I/REGS_I/OPT_REGS_I/IPR_GEN.IPR_REG_GEN[1].IPR_REG_BIT_I> \r
+
+\r
+PACKER Warning: Lut sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/Addr_cntr_load_en1 driving carry sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/I_MUXCY can not be packed with the carry due to conflict with the common signal requirement between the LUT inputs and the Carry DI/MAND pins. This would result in an extra LUT for a feedthrough.\r
+PACKER Warning: Lut sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/Addr_cntr_load_en1 driving carry sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/I_MUXCY can not be packed with the carry due to conflict with the common signal requirement between the LUT inputs and the Carry DI/MAND pins. This would result in an extra LUT for a feedthrough.\r
+
+\r
+PACKER Warning: Lut plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/Addr_cntr_load_en1 driving carry plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_SLOW_MODE_BURSTXFER.I_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/I_MUXCY can not be packed with the carry due to conflict with the common signal requirement between the LUT inputs and the Carry DI/MAND pins. This would result in an extra LUT for a feedthrough.\r
+\r
+Final Macro Processing ...\r
+\r
+=========================================================================\r
+Final Register Report\r
+\r
+Found no macro\r
+=========================================================================\r
+\r
+=========================================================================\r
+* Partition Report *\r
+=========================================================================\r
+\r
+Partition Implementation Status\r
+-------------------------------\r
+\r
+ No Partitions were found in this design.\r
+\r
+-------------------------------\r
+
+\r
+\r
+=========================================================================\r
+* Final Report *\r
+=========================================================================\r
+Final Results\r
+Top Level Output File Name : ../implementation/system.ngc\r
+Output Format : ngc\r
+Optimization Goal : speed\r
+Keep Hierarchy : no\r
+\r
+Design Statistics\r
+# IOs : 75\r
+\r
+Cell Usage :\r
+# BELS : 2456\r
+# GND : 15\r
+# INV : 39\r
+# LUT1 : 32\r
+# LUT2 : 218\r
+# LUT2_D : 12\r
+# LUT2_L : 10\r
+# LUT3 : 452\r
+# LUT3_D : 17\r
+# LUT3_L : 24\r
+# LUT4 : 1044\r
+# LUT4_D : 45\r
+# LUT4_L : 47\r
+# MULT_AND : 13\r
+# MUXCY : 231\r
+# MUXCY_L : 25\r
+# MUXF5 : 54\r
+# MUXF6 : 1\r
+# VCC : 11\r
+# XORCY : 166\r
+# FlipFlops/Latches : 2080\r
+# FD : 200\r
+# FD_1 : 5\r
+# FDC : 25\r
+# FDCE : 5\r
+# FDCPE : 4\r
+# FDE : 12\r
+# FDP : 14\r
+# FDPE : 3\r
+# FDR : 797\r
+# FDR_1 : 67\r
+# FDRE : 819\r
+# FDRS : 20\r
+# FDRSE : 37\r
+# FDS : 25\r
+# FDS_1 : 43\r
+# FDSE : 4\r
+# RAMS : 112\r
+# RAM16X1D : 110\r
+# RAMB16 : 2\r
+# Shift Registers : 134\r
+# SRL16 : 49\r
+# SRL16E : 85\r
+# Clock Buffers : 1\r
+# BUFG : 1\r
+# IO Buffers : 75\r
+# IBUF : 2\r
+# IBUFG : 1\r
+# IOBUF : 41\r
+# OBUF : 31\r
+# DCM_ADVs : 1\r
+# DCM_ADV : 1\r
+# Others : 2\r
+# JTAGPPC : 1\r
+# PPC405_ADV : 1\r
+=========================================================================\r
+
+\r
+PACKER Warning: Lut sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/Addr_cntr_load_en1 driving carry sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_STEER_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/I_MUXCY can not be packed with the carry due to conflict with the common signal requirement between the LUT inputs and the Carry DI/MAND pins. This would result in an extra LUT for a feedthrough.\r
+PACKER Warning: Lut sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/Addr_cntr_load_en1 driving carry sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTXFER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/I_MUXCY can not be packed with the carry due to conflict with the common signal requirement between the LUT inputs and the Carry DI/MAND pins. This would result in an extra LUT for a feedthrough.\r
+
+\r
+PACKER Warning: Lut plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/Addr_cntr_load_en1 driving carry plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_SLOW_MODE_BURSTXFER.I_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/I_MUXCY can not be packed with the carry due to conflict with the common signal requirement between the LUT inputs and the Carry DI/MAND pins. This would result in an extra LUT for a feedthrough.\r
+\r
+Device utilization summary:\r
+---------------------------\r
+\r
+Selected Device : 4vfx12ff668-10 \r
+\r
+ Number of Slices: 1863 out of 5472 34% \r
+ Number of Slice Flip Flops: 2016 out of 10944 18% \r
+ Number of 4 input LUTs: 2294 out of 10944 20% \r
+ Number used as logic: 1940\r
+ Number used as Shift registers: 134\r
+ Number used as RAMs: 220\r
+ Number of IOs: 75\r
+ Number of bonded IOBs: 75 out of 320 23% \r
+ IOB Flip Flops: 64\r
+ Number of FIFO16/RAMB16s: 2 out of 36 5% \r
+ Number used as RAMB16s: 2\r
+ Number of GCLKs: 1 out of 32 3% \r
+ Number of PPC405s: 1 out of 1 100% \r
+ Number of DCM_ADVs: 1 out of 4 25% \r
+\r
+
+\r
+\r
+=========================================================================\r
+TIMING REPORT\r
+\r
+NOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE.\r
+ FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORT\r
+ GENERATED AFTER PLACE-and-ROUTE.\r
+\r
+Clock Information:\r
+------------------\r
+----------------------------------------------------------------------------------------------------------------------------------------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------+\r
+Clock Signal | Clock buffer(FF name) | Load |\r
+----------------------------------------------------------------------------------------------------------------------------------------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------+\r
+net_vcc0 | NONE(ppc405_0/ppc405_0/PPC405_ADV_i) | 1 |\r
+sys_clk_pin | dcm_0/Using_DCM_ADV.DCM_ADV_INST:CLK0 | 2326 |\r
+jtagppc_0/JTGC405TCK0 | NONE(ppc405_0/ppc405_0/PPC405_ADV_i) | 1 |\r
+net_gnd0 | NONE(plb_bram_if_cntlr_1_bram/plb_bram_if_cntlr_1_bram/ramb16_1) | 2 |\r
+opb_intc_0/opb_intc_0/INTC_CORE_I/ONE_INTR_DET_GEN.INTR_DET_I/interrupts<0>(opb_intc_0/opb_intc_0/INTC_CORE_I/ONE_INTR_DET_GEN.INTR_DET_I/interrupts<0>:O)| NONE(*)(opb_intc_0/opb_intc_0/INTC_CORE_I/ONE_INTR_DET_GEN.INTR_DET_I/DETECT_INTR_I/INTR_DETECT_GEN[0].EDGE_DETECT_GEN.EDGE_DET_BIT_I/KIND_OF_EDGE_I/RISING_EDGE_GEN.RISING_EDGE_DET_I)| 1 |\r
+----------------------------------------------------------------------------------------------------------------------------------------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------+\r
+(*) This 1 clock signal(s) are generated by combinatorial logic,\r
+and XST is not able to identify which are the primary clock signals.\r
+Please use the CLOCK_SIGNAL constraint to specify the clock signal(s) generated by combinatorial logic.\r
+INFO:Xst:2169 - HDL ADVISOR - Some clock signals were not automatically buffered by XST with BUFG/BUFR resources. Please use the buffer_type constraint in order to insert these buffers to the clock signals to help prevent skew problems.\r
+\r
+Asynchronous Control Signals Information:\r
+----------------------------------------\r
+
+\r
+-------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------+\r
+Control Signal | Buffer(FF name) | Load |\r
+-------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------+\r
+net_gnd0(XST_GND:G) | NONE(ppc405_0/ppc405_0/PPC405_ADV_i) | 195 |\r
+ppc405_0/C405PLBICUMSIZE<1>(ppc405_0/XST_VCC:P) | NONE(ppc405_0/ppc405_0/PPC405_ADV_i) | 282 |\r
+ppc405_0/C405PLBICUABUS<31>(ppc405_0/XST_GND:G) | NONE(ppc405_0/ppc405_0/PPC405_ADV_i) | 396 |\r
+net_vcc0(XST_VCC:P) | NONE(ppc405_0/ppc405_0/PPC405_ADV_i) | 12 |\r
+plb_bram_if_cntlr_1_bram/plb_bram_if_cntlr_1_bram/net_gnd0(plb_bram_if_cntlr_1_bram/plb_bram_if_cntlr_1_bram/XST_GND:G) | NONE(plb_bram_if_cntlr_1_bram/plb_bram_if_cntlr_1_bram/ramb16_1) | 8 |\r
+opb/OPB_Rst(opb/opb/POR_FF_I:Q) | NONE(leds_positions/leds_positions/gpio_core_1/gpio_xferAck_Reg) | 44 |\r
+plb2opb/plb2opb/PLBside_reset_OPB_timeout_onRd(plb2opb/plb2opb/I_OPB_timeout_side_Reg_CLR:O) | NONE(plb2opb/plb2opb/I_OPB_timeout_Reg) | 1 |\r
+plb2opb/BGO_dcrDBus<31>(plb2opb/XST_GND:G) | NONE(plb2opb/plb2opb/I_OPB_timeout_Reg) | 4 |\r
+plb2opb/plb2opb/PLB_abort_regd_clear(plb2opb/plb2opb/I_PLB_abort_regd_clear:O) | NONE(plb2opb/plb2opb/I_PLB_abort_Reg) | 1 |\r
+rs232_uart/rs232_uart/OPB_UARTLITE_Core_I/reset_RX_FIFO(rs232_uart/rs232_uart/OPB_UARTLITE_Core_I/reset_RX_FIFO:Q) | NONE(rs232_uart/rs232_uart/OPB_UARTLITE_Core_I/OPB_UARTLITE_RX_I/SRL_FIFO_I/data_Exists_I) | 1 |\r
+
+\r
+rs232_uart/rs232_uart/OPB_UARTLITE_Core_I/reset_TX_FIFO(rs232_uart/rs232_uart/OPB_UARTLITE_Core_I/reset_TX_FIFO:Q) | NONE(rs232_uart/rs232_uart/OPB_UARTLITE_Core_I/OPB_UARTLITE_TX_I/SRL_FIFO_I/data_Exists_I) | 1 |\r
+plb2opb/plb2opb/OPBside_reset_Read_inprog_negedge_regd(plb2opb/plb2opb/I_OPBside_reset_Read_inprog_negedge_regd:O) | NONE(plb2opb/plb2opb/I_Read_inprog_negedge_Reg) | 1 |\r
+plb2opb/plb2opb/PLBside_reset_OPB_retry_onRd(plb2opb/plb2opb/I_B_side_Reg_CLR:O) | NONE(plb2opb/plb2opb/I_A_side_Reg) | 1 |\r
+opb_intc_0/opb_intc_0/INTC_CORE_I/ONE_INTR_DET_GEN.INTR_DET_I/clear<0>(opb_intc_0/opb_intc_0/INTC_CORE_I/ONE_INTR_DET_GEN.INTR_DET_I/clear<0>1:O)| NONE(opb_intc_0/opb_intc_0/INTC_CORE_I/ONE_INTR_DET_GEN.INTR_DET_I/DETECT_INTR_I/INTR_DETECT_GEN[0].EDGE_DETECT_GEN.EDGE_DET_BIT_I/KIND_OF_EDGE_I/RISING_EDGE_GEN.RISING_EDGE_DET_I)| 1 |\r
+-------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------+\r
+\r
+Timing Summary:\r
+---------------\r
+Speed Grade: -10\r
+\r
+ Minimum period: 9.747ns (Maximum Frequency: 102.597MHz)\r
+ Minimum input arrival time before clock: 2.764ns\r
+ Maximum output required time after clock: 4.869ns\r
+ Maximum combinational path delay: No path found\r
+\r
+Timing Detail:\r
+--------------\r
+All values displayed in nanoseconds (ns)\r
+\r
+=========================================================================\r
+Timing constraint: Default period analysis for Clock 'sys_clk_pin'\r
+ Clock period: 9.747ns (frequency: 102.597MHz)\r
+ Total number of paths / destination ports: 62036 / 6449\r
+-------------------------------------------------------------------------\r
+Delay: 9.747ns (Levels of Logic = 8)\r
+ Source: ppc405_0/ppc405_0/PPC405_ADV_i (CPU)\r
+ Destination: plb2opb/plb2opb/PLB_IF_I/wrBTerm_if_PAValid (FF)\r
+ Source Clock: sys_clk_pin rising\r
+ Destination Clock: sys_clk_pin rising\r
+\r
+ Data Path: ppc405_0/ppc405_0/PPC405_ADV_i to plb2opb/plb2opb/PLB_IF_I/wrBTerm_if_PAValid\r
+ Gate Net\r
+ Cell:in->out fanout Delay Delay Logical Name (Net Name)\r
+ ---------------------------------------- ------------\r
+ PPC405_ADV:PLBCLK->C405PLBICUSIZE2 1 2.280 0.765 ppc405_0/PPC405_ADV_i (C405PLBICUSIZE<2>)\r
+ end scope: 'ppc405_0'\r
+ begin scope: 'plb'\r
+ LUT4:I0->O 26 0.195 1.325 plb/I_PLB_ADDRPATH/I_PLBSIZE_MUX/_or00021 (PLB_size<2>)\r
+ end scope: 'plb'\r
+ begin scope: 'plb2opb'\r
+ LUT4:I1->O 5 0.195 0.737 plb2opb/PLB_IF_I/_cmp_gt00001 (plb2opb/PLB_IF_I/_cmp_gt0000)\r
+ LUT4:I1->O 3 0.195 0.728 plb2opb/PLB_IF_I/_cmp_eq00101 (plb2opb/PLB_IF_I/_cmp_eq00101)\r
+ LUT3:I1->O 1 0.195 0.000 plb2opb/PLB_IF_I/_or002391 (N664)\r
+ MUXF5:I1->O 1 0.374 0.765 plb2opb/PLB_IF_I/_or00239_f5 (plb2opb/PLB_IF_I/_or0023_map39)\r
+ LUT4:I0->O 1 0.195 0.534 plb2opb/PLB_IF_I/_or002333 (plb2opb/PLB_IF_I/wrBTerm_if_PAValid_rst)\r
+ FDRS:R 1.265 plb2opb/PLB_IF_I/wrBTerm_if_PAValid\r
+ ----------------------------------------\r
+ Total 9.747ns (4.894ns logic, 4.853ns route)\r
+ (50.2% logic, 49.8% route)\r
+\r
+=========================================================================\r
+Timing constraint: Default OFFSET IN BEFORE for Clock 'jtagppc_0/JTGC405TCK0'\r
+
+\r
+ Total number of paths / destination ports: 2 / 2\r
+-------------------------------------------------------------------------\r
+Offset: 2.274ns (Levels of Logic = 1)\r
+ Source: jtagppc_0/jtagppc_0/single_ppc_connectivity.JTAGPPC_i:TMS (PAD)\r
+ Destination: ppc405_0/ppc405_0/PPC405_ADV_i (CPU)\r
+ Destination Clock: jtagppc_0/JTGC405TCK0 rising\r
+\r
+ Data Path: jtagppc_0/jtagppc_0/single_ppc_connectivity.JTAGPPC_i:TMS to ppc405_0/ppc405_0/PPC405_ADV_i\r
+ Gate Net\r
+ Cell:in->out fanout Delay Delay Logical Name (Net Name)\r
+ ---------------------------------------- ------------\r
+ JTAGPPC:TMS 1 0.000 0.000 jtagppc_0/single_ppc_connectivity.JTAGPPC_i (JTGC405TMS0)\r
+ end scope: 'jtagppc_0'\r
+ begin scope: 'ppc405_0'\r
+ PPC405_ADV:JTGC405TMS 1.740 ppc405_0/PPC405_ADV_i\r
+ ----------------------------------------\r
+ Total 2.274ns (2.274ns logic, 0.000ns route)\r
+ (100.0% logic, 0.0% route)\r
+\r
+=========================================================================\r
+Timing constraint: Default OFFSET IN BEFORE for Clock 'sys_clk_pin'\r
+ Total number of paths / destination ports: 43 / 43\r
+-------------------------------------------------------------------------\r
+Offset: 2.764ns (Levels of Logic = 2)\r
+ Source: sys_rst_pin (PAD)\r
+ Destination: reset_block/reset_block/EXT_LPF/exr_d1 (FF)\r
+ Destination Clock: sys_clk_pin rising\r
+\r
+ Data Path: sys_rst_pin to reset_block/reset_block/EXT_LPF/exr_d1\r
+ Gate Net\r
+ Cell:in->out fanout Delay Delay Logical Name (Net Name)\r
+ ---------------------------------------- ------------\r
+ IBUF:I->O 1 0.965 0.534 sys_rst_pin_IBUF (sys_rst_pin_IBUF)\r
+ begin scope: 'reset_block'\r
+ FDR:R 1.265 reset_block/EXT_LPF/exr_d1\r
+ ----------------------------------------\r
+ Total 2.764ns (2.230ns logic, 0.534ns route)\r
+ (80.7% logic, 19.3% route)\r
+\r
+=========================================================================\r
+Timing constraint: Default OFFSET OUT AFTER for Clock 'sys_clk_pin'\r
+ Total number of paths / destination ports: 111 / 70\r
+-------------------------------------------------------------------------\r
+Offset: 4.869ns (Levels of Logic = 2)\r
+ Source: leds_4bit/leds_4bit/gpio_core_1/gpio_Data_Out_0 (FF)\r
+ Destination: fpga_0_LEDs_4Bit_GPIO_IO_pin<0> (PAD)\r
+ Source Clock: sys_clk_pin rising\r
+\r
+ Data Path: leds_4bit/leds_4bit/gpio_core_1/gpio_Data_Out_0 to fpga_0_LEDs_4Bit_GPIO_IO_pin<0>\r
+ Gate Net\r
+ Cell:in->out fanout Delay Delay Logical Name (Net Name)\r
+ ---------------------------------------- ------------\r
+ FDC:C->Q 2 0.360 0.552 leds_4bit/gpio_core_1/gpio_Data_Out_0 (GPIO_IO_O<0>)\r
+ end scope: 'leds_4bit'\r
+ IOBUF:I->IO 3.957 iobuf_0 (fpga_0_LEDs_4Bit_GPIO_IO_pin<0>)\r
+ ----------------------------------------\r
+ Total 4.869ns (4.317ns logic, 0.552ns route)\r
+ (88.7% logic, 11.3% route)\r
+\r
+=========================================================================\r
+Timing constraint: Default OFFSET OUT AFTER for Clock 'jtagppc_0/JTGC405TCK0'\r
+ Total number of paths / destination ports: 2 / 2\r
+-------------------------------------------------------------------------\r
+Offset: 2.170ns (Levels of Logic = 1)\r
+ Source: ppc405_0/ppc405_0/PPC405_ADV_i (CPU)\r
+ Destination: jtagppc_0/jtagppc_0/single_ppc_connectivity.JTAGPPC_i:TDOTSPPC (PAD)\r
+ Source Clock: jtagppc_0/JTGC405TCK0 rising\r
+\r
+ Data Path: ppc405_0/ppc405_0/PPC405_ADV_i to jtagppc_0/jtagppc_0/single_ppc_connectivity.JTAGPPC_i:TDOTSPPC\r
+ Gate Net\r
+ Cell:in->out fanout Delay Delay Logical Name (Net Name)\r
+
+\r
+ ---------------------------------------- ------------\r
+ PPC405_ADV:JTGC405TCK->C405JTGTDOEN 0 2.170 0.000 ppc405_0/PPC405_ADV_i (C405JTGTDOEN)\r
+ end scope: 'ppc405_0'\r
+ begin scope: 'jtagppc_0'\r
+ JTAGPPC:TDOTSPPC 0.000 jtagppc_0/single_ppc_connectivity.JTAGPPC_i\r
+ ----------------------------------------\r
+ Total 2.170ns (2.170ns logic, 0.000ns route)\r
+ (100.0% logic, 0.0% route)\r
+\r
+=========================================================================\r
+CPU : 81.44 / 81.53 s | Elapsed : 81.00 / 81.00 s\r
+ \r
+--> \r
+\r
+Total memory usage is 208836 kilobytes\r
+\r
+Number of errors : 0 ( 0 filtered)\r
+Number of warnings : 96 ( 0 filtered)\r
+Number of infos : 27 ( 0 filtered)\r
+\r
+
+\r
+*********************************************
+Running Xilinx Implementation tools..
+*********************************************
+
+\r
+xflow -wd implementation -p xc4vfx12ff668-10 -implement xflow.opt system.ngc
+
+\r
+Release 8.2.02i - Xflow I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+xflow.exe -wd implementation -p xc4vfx12ff668-10 -implement xflow.opt system.ngc\r
+ \r
+
+\r
+.... Copying flowfile c:/devtools/Xilinx/xilinx/data/fpga.flw into working\r
+directory\r
+C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation \r
+\r
+Using Flow File:\r
+C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/fpg\r
+a.flw \r
+Using Option File(s): \r
+ C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/xf\r
+low.opt \r
+\r
+Creating Script File ... \r
+\r
+#----------------------------------------------#\r
+# Starting program ngdbuild\r
+# ngdbuild -p xc4vfx12ff668-10 -nt timestamp -bm system.bmm\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/sy\r
+stem.ngc" -uc system.ucf system.ngd \r
+#----------------------------------------------#\r
+
+\r
+Release 8.2.02i - ngdbuild I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+\r
+Command Line: ngdbuild -p xc4vfx12ff668-10 -nt timestamp -bm system.bmm\r
+C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/sys\r
+tem.ngc -uc system.ucf system.ngd\r
+\r
+Reading NGO file\r
+'C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/sy\r
+stem.ngc' ...\r
+
+\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/pp\r
+c405_0_wrapper.ngc"...\r
+
+\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/jt\r
+agppc_0_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/re\r
+set_block_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/pl\r
+b_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/op\r
+b_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/pl\r
+b2opb_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/rs\r
+232_uart_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/le\r
+ds_4bit_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/le\r
+ds_positions_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/sr\r
+am_256kx32_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/pl\r
+b_bram_if_cntlr_1_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/pl\r
+b_bram_if_cntlr_1_bram_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/op\r
+b_intc_0_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/sr\r
+am_256kx32_util_bus_split_0_wrapper.ngc"...\r
+Loading design module\r
+"C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/implementation/dc\r
+m_0_wrapper.ngc"...\r
+\r
+Applying constraints in "system.ucf" to the design...\r
+
+\r
+\r
+Checking timing specifications ...\r
+
+\r
+INFO:XdmHelpers:851 - TNM "sys_clk_pin", used in period specification\r
+ "TS_sys_clk_pin", was traced into DCM_ADV instance\r
+ "dcm_0/dcm_0/Using_DCM_ADV.DCM_ADV_INST". The following new TNM groups and\r
+ period specifications were generated at the DCM_ADV output(s):\r
+ CLK0: TS_dcm_0_dcm_0_CLK0_BUF=PERIOD dcm_0_dcm_0_CLK0_BUF TS_sys_clk_pin*1\r
+HIGH 50%\r
+WARNING:XdmHelpers:662 - Period specification "TS_dcm_0_dcm_0_CLK0_BUF"\r
+ references the TNM group "dcm_0_dcm_0_CLK0_BUF", which contains both pads and\r
+ synchronous elements. The timing analyzer will ignore the pads for this\r
+ specification. You might want to use a qualifier (e.g. "FFS") on the TNM\r
+ property to remove the pads from this group.\r
+\r
+Processing BMM file ...\r
+\r
+Checking expanded design ...\r
+
+\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_STEER_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[0].I_SIZE_S_H_REG' has\r
+ unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_STEER_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[1].I_SIZE_S_H_REG' has\r
+ unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_S_H_AD\r
+ DR_REG[0].I_ADDR_S_H_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_S_H_AD\r
+ DR_REG[1].I_ADDR_S_H_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_S_H_AD\r
+ DR_REG[2].I_ADDR_S_H_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/MEM_DECODE\r
+ _GEN[1].I_BKEND_CS_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/MEM_DECODE\r
+ _GEN[2].I_BKEND_CS_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/MEM_DECODE\r
+ _GEN[3].I_BKEND_CS_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[0].I_BKEND_CE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[0].I_BKEND_RDCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[0].I_BKEND_WRCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[1].I_BKEND_CE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[1].I_BKEND_RDCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[1].I_BKEND_WRCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[2].I_BKEND_CE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[2].I_BKEND_RDCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[2].I_BKEND_WRCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[3].I_BKEND_CE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[3].I_BKEND_RDCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/GEN_BKEND_\r
+ CE_REGISTERS[3].I_BKEND_WRCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/I_CS_SIZE_\r
+ REG0' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/I_CS_SIZE_\r
+ REG1' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECODER/I_CS_SIZE_\r
+ REG2' has unconnected o
+\r
+utput pin\r
+
+\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BURST_SUPPORT/CONTROL_DBEAT_CNTR_I/I_UP_DWN_COUNTER/I_CARRY_OUT' has\r
+ unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BURST_SUPPORT/RESPONSE_DBEAT_CNTR_I/I_UP_DWN_COUNTER/I_CARRY_OUT' has\r
+ unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[0].I_SIZE_S_H_REG' has unconnected\r
+ output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[1].I_SIZE_S_H_REG' has unconnected\r
+ output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/LDMUX_FDRSE_0to3[0].I_FDRSE_BE0to3\r
+ ' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/LDMUX_FDRSE_0to3[1].I_FDRSE_BE0to3\r
+ ' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/LDMUX_FDRSE_0to3[2].I_FDRSE_BE0to3\r
+ ' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/LDMUX_FDRSE_0to3[3].I_FDRSE_BE0to3\r
+ ' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/LDMUX_FDRSE_4to7[4].I_FDRSE_BE4to7\r
+ ' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/LDMUX_FDRSE_4to7[5].I_FDRSE_BE4to7\r
+ ' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/LDMUX_FDRSE_4to7[6].I_FDRSE_BE4to7\r
+ ' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'sram_256kx32/sram_256kx32/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_FAST_MODE_BURSTX\r
+ FER.I_BUS_ADDRESS_COUNTER/I_FLEX_ADDR_CNTR/LDMUX_FDRSE_4to7[7].I_FDRSE_BE4to7\r
+ ' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_SL\r
+ OW_MODE_BURSTXFER.I_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[0].I_SIZE_S_H_REG' has\r
+ unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/GEN_SL\r
+ OW_MODE_BURSTXFER.I_ADDRESS_COUNTER/GEN_S_H_SIZE_REG[1].I_SIZE_S_H_REG' has\r
+ unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/GEN_S_H_ADDR_REG[0].I_ADDR_S_H_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/GEN_S_H_ADDR_REG[1].I_ADDR_S_H_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/GEN_S_H_ADDR_REG[2].I_ADDR_S_H_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/GEN_BKEND_CE_REGISTERS[0].I_BKEND_CE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/GEN_BKEND_CE_REGISTERS[0].I_BKEND_RDCE_REG' has
+\r
+unconnected output pin\r
+
+\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/GEN_BKEND_CE_REGISTERS[0].I_BKEND_WRCE_REG' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/I_CS_SIZE_REG0' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/I_CS_SIZE_REG1' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'plb_bram_if_cntlr_1/plb_bram_if_cntlr_1/I_PLB_IPIF/I_SLAVE_ATTACHMENT/I_DECO\r
+ DER/I_CS_SIZE_REG2' has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[0].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[1].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[2].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[3].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[4].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[5].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[6].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[7].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[8].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[9].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[10].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[11].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[12].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[13].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[14].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[15].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[16].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[17].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[18].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[19].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[20].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[21].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[22].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+
+\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[23].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[24].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[25].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[26].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[30].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_ABUS_REG_GEN[31].OPB_ABUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[0].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[1].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[2].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[3].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[4].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[5].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[6].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[7].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[8].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[9].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[10].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[11].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[12].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[13].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[14].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[15].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[16].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[17].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[18].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[19].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[20].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[21].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+
+\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[22].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[23].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[24].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[25].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[26].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[27].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[28].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+WARNING:NgdBuild:443 - SFF primitive\r
+ 'opb_intc_0/opb_intc_0/OPB_INTFC_I/OPB_DBUS_REG_GEN[29].OPB_DBUS_REG_BIT_I'\r
+ has unconnected output pin\r
+\r
+Partition Implementation Status\r
+-------------------------------\r
+\r
+ No Partitions were found in this design.\r
+\r
+-------------------------------\r
+\r
+NGDBUILD Design Results Summary:\r
+ Number of errors: 0\r
+ Number of warnings: 106\r
+\r
+Writing NGD file "system.ngd" ...\r
+\r
+Writing NGDBUILD log file "system.bld"...\r
+\r
+NGDBUILD done.\r
+\r
+\r
+\r
+#----------------------------------------------#\r
+# Starting program map\r
+# map -o system_map.ncd -pr b system.ngd system.pcf \r
+#----------------------------------------------#\r
+
+\r
+Release 8.2.02i - Map I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+Using target part "4vfx12ff668-10".\r
+
+\r
+Mapping design into LUTs...\r
+
+\r
+Writing file system_map.ngm...\r
+
+\r
+Running directed packing...\r
+
+\r
+Running delay-based LUT packing...\r
+Running related packing...\r
+
+\r
+Writing design file "system_map.ncd"...\r
+
+\r
+\r
+Design Summary:\r
+Number of errors: 0\r
+Number of warnings: 13\r
+Logic Utilization:\r
+ Number of Slice Flip Flops: 1,653 out of 10,944 15%\r
+ Number of Slice FFs used for\r
+ DCM autocalibration logic: 7 out of 1,653 1%\r
+ Number of 4 input LUTs: 1,466 out of 10,944 13%\r
+ Number of LUTs used for\r
+ DCM autocalibration logic: 4 out of 1,466 1%\r
+ *See INFO below for an explanation of the DCM autocalibration logic\r
+ added by Map\r
+Logic Distribution:\r
+ Number of occupied Slices: 1,593 out of 5,472 29%\r
+ Number of Slices containing only related logic: 1,593 out of 1,593 100%\r
+ Number of Slices containing unrelated logic: 0 out of 1,593 0%\r
+ *See NOTES below for an explanation of the effects of unrelated logic\r
+Total Number 4 input LUTs: 1,863 out of 10,944 17%\r
+ Number used as logic: 1,466\r
+ Number used as a route-thru: 46\r
+ Number used for Dual Port RAMs: 210\r
+ (Two LUTs used per Dual Port RAM)\r
+ Number used as Shift registers: 141\r
+ Number of bonded IOBs: 75 out of 320 23%\r
+ Number of BUFG/BUFGCTRLs: 1 out of 32 3%\r
+ Number used as BUFGs: 1\r
+ Number used as BUFGCTRLs: 0\r
+ Number of FIFO16/RAMB16s: 2 out of 36 5%\r
+ Number used as FIFO16s: 0\r
+ Number used as RAMB16s: 2\r
+ Number of DCM_ADVs: 1 out of 4 25%\r
+ Number of PPC405_ADVs: 1 out of 1 100%\r
+ Number of JTAGPPCs: 1 out of 1 100%\r
+\r
+Total equivalent gate count for design: 177,804\r
+Additional JTAG gate count for IOBs: 3,600\r
+Peak Memory Usage: 240 MB\r
+\r
+NOTES:\r
+\r
+ Related logic is defined as being logic that shares connectivity - e.g. two\r
+ LUTs are "related" if they share common inputs. When assembling slices,\r
+ Map gives priority to combine logic that is related. Doing so results in\r
+ the best timing performance.\r
+\r
+ Unrelated logic shares no connectivity. Map will only begin packing\r
+ unrelated logic into a slice once 99% of the slices are occupied through\r
+ related logic packing.\r
+\r
+ Note that once logic distribution reaches the 99% level through related\r
+ logic packing, this does not mean the device is completely utilized.\r
+ Unrelated logic packing will then begin, continuing until all usable LUTs\r
+ and FFs are occupied. Depending on your timing budget, increased levels of\r
+ unrelated logic packing may adversely affect the overall timing performance\r
+ of your design.\r
+\r
+INFO:\r
+\r
+ Logic has been added to automatically put the DCMs in auto-calibration\r
+ mode if the clock input or clock feedback ever stops. This is recommended\r
+ to ensure that the DCMs will maintain maximum operating frequency for the\r
+ following Virtex-4 devices: Production Step 2 for LX/SX, and all Productions\r
+ for FX. The extra logic insertion can be disabled by placing the\r
+ DCM_AUTOCALIBRATION=FALSE attribute on each applicable DCM or by setting\r
+ the environment variable XIL_DCM_AUTOCALIBRATION_OFF. For more information\r
+ regarding the DCM auto-calibration mode, please consult Answer Record 21435.\r
+\r
+\r
+Mapping completed.\r
+See MAP report file "system_map.mrp" for details.\r
+\r
+\r
+\r
+#----------------------------------------------#\r
+# Starting program par\r
+# par -w -ol high system_map.ncd system.ncd system.pcf \r
+#----------------------------------------------#\r
+
+\r
+Release 8.2.02i - par I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+\r
+\r
+\r
+Constraints file: system.pcf.\r
+WARNING:Par:331 - You are using an evaluation version of Xilinx Software. In 35 days, this program will not operate. For\r
+ more information about this product, please refer to the Evaluation Agreement, which was shipped to you along with\r
+ the Evaluation CDs.\r
+ To purchase an annual license for this software, please contact your local Field Applications Engineer (FAE) or\r
+ salesperson. If you have any questions, or if we can assist in any way, please send an email to: eval@xilinx.com\r
+ Thank You!\r
+Loading device for application Rf_Device from file '4vfx12.nph' in environment c:\devtools\Xilinx.\r
+
+\r
+ "system" is an NCD, version 3.1, device xc4vfx12, package ff668, speed -10\r
+
+\r
+\r
+Initializing temperature to 85.000 Celsius. (default - Range: -40.000 to 100.000 Celsius)\r
+Initializing voltage to 1.140 Volts. (default - Range: 1.140 to 1.260 Volts)\r
+\r
+
+\r
+\r
+Device speed data version: "PRODUCTION 1.61 2006-08-18".\r
+\r
+\r
+Device Utilization Summary:\r
+\r
+ Number of BUFGs 1 out of 32 3%\r
+ Number of DCM_ADVs 1 out of 4 25%\r
+ Number of ILOGICs 42 out of 320 13%\r
+ Number of External IOBs 75 out of 320 23%\r
+ Number of LOCed IOBs 75 out of 75 100%\r
+\r
+ Number of JTAGPPCs 1 out of 1 100%\r
+ Number of OLOGICs 61 out of 320 19%\r
+ Number of PPC405_ADVs 1 out of 1 100%\r
+ Number of RAMB16s 2 out of 36 5%\r
+ Number of Slices 1593 out of 5472 29%\r
+ Number of SLICEMs 186 out of 2736 6%\r
+\r
+\r
+\r
+Overall effort level (-ol): High \r
+Placer effort level (-pl): High \r
+Placer cost table entry (-t): 1\r
+Router effort level (-rl): High \r
+\r
+Starting initial Timing Analysis. REAL time: 12 secs \r
+Finished initial Timing Analysis. REAL time: 13 secs \r
+\r
+\r
+Starting Placer\r
+
+\r
+\r
+Phase 1.1\r
+
+\r
+Phase 1.1 (Checksum:99077d) REAL time: 19 secs \r
+\r
+Phase 2.7\r
+Phase 2.7 (Checksum:1312cfe) REAL time: 19 secs \r
+\r
+Phase 3.31\r
+Phase 3.31 (Checksum:1c9c37d) REAL time: 19 secs \r
+\r
+Phase 4.2\r
+
+\r
+\r
+\r
+\r
+Phase 4.2 (Checksum:26259fc) REAL time: 35 secs \r
+\r
+Phase 5.30\r
+Phase 5.30 (Checksum:2faf07b) REAL time: 35 secs \r
+\r
+Phase 6.3\r
+Phase 6.3 (Checksum:39386fa) REAL time: 35 secs \r
+\r
+Phase 7.5\r
+Phase 7.5 (Checksum:42c1d79) REAL time: 36 secs \r
+\r
+Phase 8.8\r
+.................
+\r
+.......................................\r
+
+\r
+...................\r
+
+\r
+.......
+\r
+..................
+\r
+..............
+\r
+..............\r
+....................................................................................................\r
+.............................\r
+.............\r
+Phase 8.8 (Checksum:fc60df) REAL time: 1 mins 8 secs \r
+\r
+Phase 9.5\r
+Phase 9.5 (Checksum:55d4a77) REAL time: 1 mins 8 secs \r
+\r
+Phase 11.18\r
+Phase 11.18 (Checksum:68e7775) REAL time: 1 mins 37 secs \r
+\r
+Phase 12.27\r
+Phase 12.27 (Checksum:7270df4) REAL time: 1 mins 38 secs \r
+\r
+Phase 13.5\r
+Phase 13.5 (Checksum:7bfa473) REAL time: 1 mins 39 secs \r
+\r
+
+\r
+Writing design to file system.ncd\r
+\r
+\r
+Total REAL time to Placer completion: 1 mins 49 secs \r
+Total CPU time to Placer completion: 1 mins 23 secs \r
+\r
+Starting Router\r
+\r
+
+\r
+Phase 1: 11496 unrouted; REAL time: 1 mins 50 secs \r
+\r
+
+\r
+Phase 2: 9108 unrouted; REAL time: 1 mins 57 secs \r
+\r
+
+\r
+Phase 3: 2448 unrouted; REAL time: 2 mins 3 secs \r
+\r
+Phase 4: 2448 unrouted; (6864) REAL time: 2 mins 3 secs \r
+\r
+
+\r
+Phase 5: 2447 unrouted; (184) REAL time: 2 mins 10 secs \r
+\r
+Phase 6: 2447 unrouted; (0) REAL time: 2 mins 11 secs \r
+\r
+
+\r
+Phase 7: 0 unrouted; (0) REAL time: 2 mins 14 secs \r
+\r
+
+\r
+Phase 8: 0 unrouted; (0) REAL time: 2 mins 21 secs \r
+\r
+
+\r
+Phase 9: 0 unrouted; (0) REAL time: 2 mins 30 secs \r
+\r
+Total REAL time to Router completion: 2 mins 30 secs \r
+Total CPU time to Router completion: 2 mins 2 secs \r
+\r
+Partition Implementation Status\r
+-------------------------------\r
+\r
+ No Partitions were found in this design.\r
+\r
+-------------------------------\r
+\r
+Generating "PAR" statistics.\r
+\r
+**************************\r
+Generating Clock Report\r
+**************************\r
+\r
++---------------------+--------------+------+------+------------+-------------+\r
+| Clock Net | Resource |Locked|Fanout|Net Skew(ns)|Max Delay(ns)|\r
++---------------------+--------------+------+------+------------+-------------+\r
+|fpga_0_SRAM_CLOCK_OB | | | | | |\r
+| UF | BUFGCTRL_X0Y0| No | 1291 | 0.312 | 2.673 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|jtagppc_0_0_JTGC405T | | | | | |\r
+| CK | Local| | 1 | 0.000 | 1.647 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|opb_intc_0/opb_intc_ | | | | | |\r
+|0/INTC_CORE_I/ONE_IN | | | | | |\r
+|TR_DET_GEN.INTR_DET_ | | | | | |\r
+| I/interrupts<0> | Local| | 1 | 0.000 | 0.492 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|DCM_AUTOCALIBRATION_ | | | | | |\r
+|dcm_0/dcm_0/Using_DC | | | | | |\r
+|M_ADV.DCM_ADV_INST/d | | | | | |\r
+|cm_0/dcm_0/Using_DCM | | | | | |\r
+|_ADV.DCM_ADV_INST/CL | | | | | |\r
+| KOUT | Local| | 6 | 0.013 | 0.499 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|DCM_AUTOCALIBRATION_ | | | | | |\r
+|dcm_0/dcm_0/Using_DC | | | | | |\r
+|M_ADV.DCM_ADV_INST/d | | | | | |\r
+|cm_0/dcm_0/Using_DCM | | | | | |\r
+|_ADV.DCM_ADV_INST/cd | | | | | |\r
+| /CLK<3> | Local| | 2 | 0.000 | 0.532 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|DCM_AUTOCALIBRATION_ | | | | | |\r
+|dcm_0/dcm_0/Using_DC | | | | | |\r
+|M_ADV.DCM_ADV_INST/d | | | | | |\r
+|cm_0/dcm_0/Using_DCM | | | | | |\r
+|_ADV.DCM_ADV_INST/cd | | | | | |\r
+| /CLK<2> | Local| | 2 | 0.000 | 0.475 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|DCM_AUTOCALIBRATION_ | | | | | |\r
+|dcm_0/dcm_0/Using_DC | | | | | |\r
+|M_ADV.DCM_ADV_INST/d | | | | | |\r
+|cm_0/dcm_0/Using_DCM | | | | | |\r
+|_ADV.DCM_ADV_INST/cd | | | | | |\r
+| /CLK<4> | Local| | 2 | 0.000 | 0.850 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|DCM_AUTOCALIBRATION_ | | | | | |\r
+|dcm_0/dcm_0/Using_DC | | | | | |\r
+|M_ADV.DCM_ADV_INST/d | | | | | |\r
+|cm_0/dcm_0/Using_DCM
+\r
+ | | | | | |\r
+|_ADV.DCM_ADV_INST/cd | | | | | |\r
+| /CLK<5> | Local| | 2 | 0.000 | 0.462 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|DCM_AUTOCALIBRATION_ | | | | | |\r
+|dcm_0/dcm_0/Using_DC | | | | | |\r
+|M_ADV.DCM_ADV_INST/d | | | | | |\r
+|cm_0/dcm_0/Using_DCM | | | | | |\r
+|_ADV.DCM_ADV_INST/cd | | | | | |\r
+| /CLK<6> | Local| | 2 | 0.000 | 0.692 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|DCM_AUTOCALIBRATION_ | | | | | |\r
+|dcm_0/dcm_0/Using_DC | | | | | |\r
+|M_ADV.DCM_ADV_INST/d | | | | | |\r
+|cm_0/dcm_0/Using_DCM | | | | | |\r
+|_ADV.DCM_ADV_INST/cd | | | | | |\r
+| /CLK<1> | Local| | 2 | 0.000 | 0.498 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+|DCM_AUTOCALIBRATION_ | | | | | |\r
+|dcm_0/dcm_0/Using_DC | | | | | |\r
+|M_ADV.DCM_ADV_INST/d | | | | | |\r
+|cm_0/dcm_0/Using_DCM | | | | | |\r
+|_ADV.DCM_ADV_INST/FA | | | | | |\r
+| STCLK | Local| | 3 | 0.000 | 0.497 |\r
++---------------------+--------------+------+------+------------+-------------+\r
+\r
+* Net Skew is the difference between the minimum and maximum routing\r
+only delays for the net. Note this is different from Clock Skew which\r
+is reported in TRCE timing report. Clock Skew is the difference between\r
+the minimum and maximum path delays which includes logic delays.\r
+\r
+Timing Score: 0\r
+\r
+Number of Timing Constraints that were not applied: 1\r
+\r
+Asterisk (*) preceding a constraint indicates it was not met.\r
+ This may be due to a setup or hold violation.\r
+\r
+------------------------------------------------------------------------------------------------------\r
+ Constraint | Requested | Actual | Logic | Absolute |Number of\r
+ | | | Levels | Slack |errors \r
+------------------------------------------------------------------------------------------------------\r
+ TS_dcm_0_dcm_0_CLK0_BUF = PERIOD TIMEGRP | 10.000ns | 9.723ns | 4 | 0.277ns | 0 \r
+ "dcm_0_dcm_0_CLK0_BUF" TS_sys_clk_pin | | | | | \r
+ HIGH 50% | | | | | \r
+------------------------------------------------------------------------------------------------------\r
+ TS_sys_clk_pin = PERIOD TIMEGRP "sys_clk_ | N/A | N/A | N/A | N/A | N/A \r
+ pin" 10 ns HIGH 50% | | | | | \r
+------------------------------------------------------------------------------------------------------\r
+ PATH "TS_RST1_path" TIG | N/A | 3.522ns | 1 | N/A | N/A \r
+------------------------------------------------------------------------------------------------------\r
+\r
+\r
+All constraints were met.\r
+INFO:Timing:2761 - N/A entries in the Constraints list may indicate that the \r
+ constraint does not cover any paths or that it has no requested value.\r
+\r
+\r
+Generating Pad Report.\r
+\r
+All signals are completely routed.\r
+\r
+Total REAL time to PAR completion: 2 mins 34 secs \r
+
+\r
+Total CPU time to PAR completion: 2 mins 4 secs \r
+\r
+Peak Memory Usage: 239 MB\r
+\r
+Placement: Completed - No errors found.\r
+Routing: Completed - No errors found.\r
+Timing: Completed - No errors found.\r
+\r
+Number of error messages: 0\r
+Number of warning messages: 1\r
+Number of info messages: 0\r
+\r
+Writing design to file system.ncd\r
+\r
+\r
+
+\r
+\r
+PAR done!\r
+\r
+\r
+\r
+#----------------------------------------------#\r
+# Starting program post_par_trce\r
+# trce -e 3 -xml system.twx system.ncd system.pcf \r
+#----------------------------------------------#\r
+
+\r
+Release 8.2.02i - Trace \r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+\r
+\r
+Loading device for application Rf_Device from file '4vfx12.nph' in environment\r
+c:\devtools\Xilinx.\r
+
+\r
+ "system" is an NCD, version 3.1, device xc4vfx12, package ff668, speed -10\r
+
+\r
+--------------------------------------------------------------------------------\r
+Release 8.2.02i Trace \r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+\r
+trce -e 3 -xml system.twx system.ncd system.pcf\r
+\r
+\r
+Design file: system.ncd\r
+Physical constraint file: system.pcf\r
+Device,speed: xc4vfx12,-10 (PRODUCTION 1.61 2006-08-18, STEPPING\r
+level 0)\r
+Report level: error report\r
+--------------------------------------------------------------------------------\r
+\r
+INFO:Timing:2752 - To get complete path coverage, use the unconstrained paths\r
+ option. All paths that are not constrained will be reported in the\r
+ unconstrained paths section(s) of the report.\r
+\r
+\r
+Timing summary:\r
+---------------\r
+\r
+Timing errors: 0 Score: 0\r
+\r
+Constraints cover 38305 paths, 0 nets, and 10316 connections\r
+\r
+Design statistics:\r
+ Minimum period: 9.723ns (Maximum frequency: 102.849MHz)\r
+\r
+\r
+Analysis completed Tue Mar 04 09:10:25 2008\r
+--------------------------------------------------------------------------------\r
+\r
+Generating Report ...\r
+\r
+Number of warnings: 0\r
+Number of info messages: 1\r
+Total time: 16 secs \r
+\r
+\r
+xflow done!\r
+
+\r
+*********************************************
+
+\r
+Running Bitgen..
+*********************************************
+
+\r
+cd implementation; bitgen -w -f bitgen.ut system
+
+\r
+Release 8.2.02i - Bitgen I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+Loading device for application Rf_Device from file '4vfx12.nph' in environment\r
+c:\devtools\Xilinx.\r
+
+\r
+ "system" is an NCD, version 3.1, device xc4vfx12, package ff668, speed -10\r
+
+\r
+Opened constraints file system.pcf.\r
+\r
+Tue Mar 04 09:10:36 2008\r
+\r
+Running DRC.\r
+
+\r
+WARNING:PhysDesignRules:372 - Gated clock. Clock net\r
+ opb_intc_0/opb_intc_0/INTC_CORE_I/ONE_INTR_DET_GEN.INTR_DET_I/interrupts<0>\r
+ is sourced by a combinatorial pin. This is not good design practice. Use the\r
+ CE pin to control the loading of data into the flip-flop.\r
+WARNING:PhysDesignRules:372 - Gated clock. Clock net\r
+ DCM_AUTOCALIBRATION_dcm_0/dcm_0/Using_DCM_ADV.DCM_ADV_INST/dcm_0/dcm_0/Using_\r
+ DCM_ADV.DCM_ADV_INST/CLKOUT is sourced by a combinatorial pin. This is not\r
+ good design practice. Use the CE pin to control the loading of data into the\r
+ flip-flop.\r
+WARNING:PhysDesignRules:372 - Gated clock. Clock net\r
+ DCM_AUTOCALIBRATION_dcm_0/dcm_0/Using_DCM_ADV.DCM_ADV_INST/dcm_0/dcm_0/Using_\r
+ DCM_ADV.DCM_ADV_INST/cd/CLK<3> is sourced by a combinatorial pin. This is not\r
+ good design practice. Use the CE pin to control the loading of data into the\r
+ flip-flop.\r
+WARNING:PhysDesignRules:372 - Gated clock. Clock net\r
+ DCM_AUTOCALIBRATION_dcm_0/dcm_0/Using_DCM_ADV.DCM_ADV_INST/dcm_0/dcm_0/Using_\r
+ DCM_ADV.DCM_ADV_INST/cd/CLK<2> is sourced by a combinatorial pin. This is not\r
+ good design practice. Use the CE pin to control the loading of data into the\r
+ flip-flop.\r
+WARNING:PhysDesignRules:372 - Gated clock. Clock net\r
+ DCM_AUTOCALIBRATION_dcm_0/dcm_0/Using_DCM_ADV.DCM_ADV_INST/dcm_0/dcm_0/Using_\r
+ DCM_ADV.DCM_ADV_INST/cd/CLK<4> is sourced by a combinatorial pin. This is not\r
+ good design practice. Use the CE pin to control the loading of data into the\r
+ flip-flop.\r
+WARNING:PhysDesignRules:372 - Gated clock. Clock net\r
+ DCM_AUTOCALIBRATION_dcm_0/dcm_0/Using_DCM_ADV.DCM_ADV_INST/dcm_0/dcm_0/Using_\r
+ DCM_ADV.DCM_ADV_INST/cd/CLK<5> is sourced by a combinatorial pin. This is not\r
+ good design practice. Use the CE pin to control the loading of data into the\r
+ flip-flop.\r
+WARNING:PhysDesignRules:372 - Gated clock. Clock net\r
+ DCM_AUTOCALIBRATION_dcm_0/dcm_0/Using_DCM_ADV.DCM_ADV_INST/dcm_0/dcm_0/Using_\r
+ DCM_ADV.DCM_ADV_INST/cd/CLK<6> is sourced by a combinatorial pin. This is not\r
+ good design practice. Use the CE pin to control the loading of data into the\r
+ flip-flop.\r
+WARNING:PhysDesignRules:372 - Gated clock. Clock net\r
+ DCM_AUTOCALIBRATION_dcm_0/dcm_0/Using_DCM_ADV.DCM_ADV_INST/dcm_0/dcm_0/Using_\r
+ DCM_ADV.DCM_ADV_INST/cd/CLK<1> is sourced by a combinatorial pin. This is not\r
+ good design practice. Use the CE pin to control the loading of data into the\r
+ flip-flop.\r
+WARNING:PhysDesignRules:812 - Dangling pin <TDOTSPPC> on\r
+ block:<jtagppc_0/jtagppc_0/single_ppc_connectivity.JTAGPPC_i/jtagppc_0/jtagpp\r
+ c_0/single_ppc_connectivity.JTAGPPC_i>:<JTAGPPC_JTAGPPC>.\r
+DRC detected 0 errors and 9 warnings.\r
+
+\r
+Creating bit map...\r
+
+\r
+Saving bit stream in "system.bit".\r
+
+\r
+Bitstream generation is complete.\r
+
+\r
+*********************************************
+
+\r
+Initializing BRAM contents of the bitstream
+
+\r
+*********************************************
+bitinit system.mhs \
+-bt implementation/system.bit -o implementation/download.bit
+
+\r
+\r
+bitinit version Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4\r
+Copyright (c) Xilinx Inc. 2002.\r
+\r
+Parsing MHS File system.mhs...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/ppc405_virtex4_v1_01_a/data\r
+/ppc405_virtex4_v2_1_0.tcl ...
+\r
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/jtagppc_cntlr_v2_00_a/data/\r
+jtagppc_cntlr_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_v34_v1_02_a/data/plb_v3\r
+4_v2_1_0.tcl ...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb2opb_bridge_v1_01_a/data\r
+/plb2opb_bridge_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_emc_v2_00_a/data/plb_em\r
+c_v2_1_0.tcl ...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_bram_if_cntlr_v1_00_b/d\r
+ata/plb_bram_if_cntlr_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/opb_intc_v1_00_c/data/opb_i\r
+ntc_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm\r
+_module_v2_1_0.tcl ...\r
+
+\r
+\r
+Overriding IP level properties ...\r
+jtagppc_cntlr (jtagppc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\jtagppc_cntlr_v2_00_a\data\\r
+jtagppc_cntlr_v2_1_0.mpd line 36 - tool overriding c_device value X2VP4 to \r
+plb2opb_bridge (plb2opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb2opb_bridge_v1_01_a\data\r
+\plb2opb_bridge_v2_1_0.mpd line 39 - tool overriding c_family value virtex2p to \r
+opb_gpio (leds_4bit) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_g\r
+pio_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to \r
+opb_gpio (leds_positions) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_g\r
+pio_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to \r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 43 - tool overriding c_family value virtex2 to \r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 38 - tool overriding c_family value virtex2 to \r
+dcm_module (dcm_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm\r
+_module_v2_1_0.mpd line 61 - tool overriding c_family value virtex2 to \r
+\r
+Performing IP level DRCs on properties...\r
+\r
+Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/emc_common_v2_00_a/data/emc\r
+_common_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/\r
+bram_if_cntlr_v2_1_0.tcl ...\r
+
+\r
+Address Map for Processor ppc405_0\r
+ (0x00000000-0x000fffff) SRAM_256Kx32 plb\r
+ (0x40000000-0x4000ffff) LEDs_4Bit plb->plb2opb->opb\r
+ (0x40020000-0x4002ffff) LEDs_Positions plb->plb2opb->opb\r
+ (0x40600000-0x4060ffff) RS232_Uart plb->plb2opb->opb\r
+ (0x41200000-0x4120ffff) opb_intc_0 plb->plb2opb->opb\r
+ (0xfffff000-0xffffffff) plb_bram_if_cntlr_1 plb\r
+\r
+Initializing Memory...\r
+No ELF file specified for initialization.\r
+Copying implementation/system.bit to implementation/download.bit...\r
+Memory Initialization completed successfully.\r
+\r
+
+\r
+
+*********************************************
+Downloading Bitstream onto the target board
+
+\r
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+
+\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+
+\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+
+\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 2 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+make: *** [download] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:12:39 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+*********************************************
+
+\r
+Downloading Bitstream onto the target board
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+
+\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 1 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+make: *** [download] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:13:35 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+
+\r
+*********************************************
+Downloading Bitstream onto the target board
+
+\r
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+
+\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+make: *** [download] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:14:16 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+*********************************************
+
+\r
+Downloading Bitstream onto the target board
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+
+\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 1 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+make: *** [download] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+Xilinx Platform Studio (XPS)\r
+Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4
+\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.
+\r
+At Local date and time: Tue Mar 04 09:15:32 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+
+\r
+*********************************************
+Downloading Bitstream onto the target board
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+
+\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+make: *** [download] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+ERROR:MDT - Could not open C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\system_incl.make for writing
+\r
+Xilinx Platform Studio (XPS)\r
+Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4
+\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.
+\r
+At Local date and time: Tue Mar 04 09:29:20 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+*********************************************
+
+\r
+Creating software libraries...
+*********************************************
+libgen -mhs system.mhs -p xc4vfx12ff668-10 system.mss
+
+\r
+libgen\r
+Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+\r
+Command Line: libgen -mhs system.mhs -p xc4vfx12ff668-10 system.mss \r
+\r
+
+\r
+Output Directory (-od) :\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\\r
+Part (-p) : virtex4\r
+\r
+Software Specification file : system.mss\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/ppc405_virtex4_v1_01_a/data\r
+/ppc405_virtex4_v2_1_0.tcl ...
+\r
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/jtagppc_cntlr_v2_00_a/data/\r
+jtagppc_cntlr_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_v34_v1_02_a/data/plb_v3\r
+4_v2_1_0.tcl ...
+\r
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb2opb_bridge_v1_01_a/data\r
+/plb2opb_bridge_v2_1_0.tcl ...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_emc_v2_00_a/data/plb_em\r
+c_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/plb_bram_if_cntlr_v1_00_b/d\r
+ata/plb_bram_if_cntlr_v2_1_0.tcl ...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/opb_intc_v1_00_c/data/opb_i\r
+ntc_v2_1_0.tcl ...
+\r
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/dcm_module_v1_00_a/data/dcm\r
+_module_v2_1_0.tcl ...\r
+
+\r
+\r
+Overriding IP level properties ...\r
+jtagppc_cntlr (jtagppc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\jtagppc_cntlr_v2_00_a\data\\r
+jtagppc_cntlr_v2_1_0.mpd line 36 - tool overriding c_device value X2VP4 to\r
+4vfx12\r
+plb2opb_bridge (plb2opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb2opb_bridge_v1_01_a\data\r
+\plb2opb_bridge_v2_1_0.mpd line 39 - tool overriding c_family value virtex2p to\r
+virtex4\r
+opb_gpio (leds_4bit) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_g\r
+pio_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex4\r
+opb_gpio (leds_positions) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_gpio_v3_01_b\data\opb_g\r
+pio_v2_1_0.mpd line 42 - tool overriding c_family value virtex2 to virtex4\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 43 - tool overriding c_family value virtex2 to virtex4\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 38 - tool overriding c_family value virtex2 to virtex4\r
+dcm_module (dcm_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm\r
+_module_v2_1_0.mpd line 61 - tool overriding c_family value virtex2 to virtex4\r
+\r
+Performing IP level DRCs on properties...\r
+\r
+Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/emc_common_v2_00_a/data/emc\r
+_common_v2_1_0.tcl ...\r
+
+\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/bram_if_cntlr_v1_00_b/data/\r
+bram_if_cntlr_v2_1_0.tcl ...\r
+
+\r
+Address Map for Processor ppc405_0\r
+ (0x00000000-0x000fffff) SRAM_256Kx32 plb\r
+ (0x40000000-0x4000ffff) LEDs_4Bit plb->plb2opb->opb\r
+ (0x40020000-0x4002ffff) LEDs_Positions plb->plb2opb->opb\r
+ (0x40600000-0x4060ffff) RS232_Uart plb->plb2opb->opb\r
+ (0x41200000-0x4120ffff) opb_intc_0 plb->plb2opb->opb\r
+ (0xfffff000-0xffffffff) plb_bram_if_cntlr_1 plb\r
+\r
+Check platform address map ...\r
+\r
+Overriding system level properties ...\r
+plb_v34 (plb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_v34_v1_02_a\data\plb_v3\r
+4_v2_1_0.mpd line 42 - tool overriding c_plb_num_masters value 4 to 2\r
+plb_v34 (plb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_v34_v1_02_a\data\plb_v3\r
+4_v2_1_0.mpd line 43 - tool overriding c_plb_num_slaves value 4 to 3\r
+plb_v34 (plb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_v34_v1_02_a\data\plb_v3\r
+4_v2_1_0.mpd line 44 - tool overriding c_plb_mid_width value 2 to 1\r
+opb_v20 (opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v2\r
+0_v2_1_0.mpd line 40 - tool overriding c_num_masters value 4 to 1\r
+plb2opb_bridge (plb2opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb2opb_bridge_v1_01_a\data\r
+\plb2opb_bridge_v2_1_0.mpd line 51 - tool overriding c_plb_num_masters value 4\r
+to 2\r
+plb2opb_bridge (plb2opb) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb2opb_bridge_v1_01_a\data\r
+\plb2opb_bridge_v2_1_0.mpd line 52 - tool overriding c_plb_mid_width value 4 to\r
+1\r
+plb_emc (sram_256kx32) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_emc_v2_00_a\data\plb_em\r
+c_v2_1_0.mpd line 39 - tool overriding c_num_masters value 8 to 2\r
+plb_emc (sram_256kx32) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_emc_v2_00_a\data\plb_em\r
+c_v2_1_0.mpd line 97 - tool overriding c_plb_mid_width value 3 to 1\r
+plb_bram_if_cntlr (plb_bram_if_cntlr_1) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_bram_if_cntlr_v1_00_b\d\r
+ata\plb_bram_if_cntlr_v2_1_0.mpd line 43 - tool overriding c_num_masters value 8\r
+to 2\r
+plb_bram_if_cntlr (plb_bram_if_cntlr_1) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\plb_bram_if_cntlr_v1_00_b\d\r
+ata\plb_bram_if_cntlr_v2_1_0.mpd line 50 - tool overriding c_plb_mid_width value\r
+3 to 1\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 39 - tool overriding c_memsize value 2048 to 0x1000\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 40 - tool overriding c_port_dwidth value 32 to 64\r
+bram_block (plb_bram_if_cntlr_1_bram) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra\r
+m_block_v2_1_0.mpd line 42 - tool overriding c_num_we value 4 to 8\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 46 - tool overriding c_num_intr_inputs value 2 to 1\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 47 - tool overriding c_kind_of_intr value\r
+0b11111111111111111111111111111111 to 0b00000000000000000000000000000001\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 48 - tool overriding c_kind_of_edge value\r
+0b11111111111111111111111111111111 to 0b00000000000000000000000000000001\r
+opb_intc (opb_intc_0) -\r
+C:\devtools\XilinxEDK\hw\XilinxProcessorIPLib\pcores\opb_intc_v1_00_c\data\opb_i\r
+ntc_v2_1_0.mpd line 49 - tool overriding c_kind_of_lvl value\r
+0b11111111111111111111111111111111 to 0b00000000000000000000000000000000\r
+\r
+Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...\r
+Sourcing tcl file\r
+C:/devtools/XilinxEDK/hw/XilinxProcessorIPLib/pcores/intc_core_v1_00_c/data/intc\r
+_core_v2_1_0.tcl ...\r
+
+\r
+\r
+Performing System level DRCs on properties...\r
+
+\r
+INFO:MDT - List of peripherals addressable from processor instance ppc405_0 : \r
+ - plb\r
+ - opb\r
+ - RS232_Uart\r
+ - LEDs_4Bit\r
+ - LEDs_Positions\r
+ - opb_intc_0\r
+ - SRAM_256Kx32\r
+ - plb_bram_if_cntlr_1\r
+
+\r
+\r
+Building Directory Structure for ppc405_0\r
+
+\r
+FPU OPTION: \r
+\r
+Generating platform libraries and device drivers ...\r
+\r
+Running CopyFiles ...\r
+
+\r
+\r
+Copying files for os standalone_v1_00_a from\r
+C:\devtools\XilinxEDK\sw\lib\bsp\standalone_v1_00_a\src\ to\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\ppc405_0\libsrc\st\r
+andalone_v1_00_a\ ...\r
+
+\r
+\r
+Copying files for driver plbarb_v1_01_a from\r
+C:\devtools\XilinxEDK\sw\XilinxProcessorIPLib\drivers\plbarb_v1_01_a\src\ to\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\ppc405_0\libsrc\pl\r
+barb_v1_01_a\ ...\r
+
+\r
+\r
+Copying files for driver opbarb_v1_02_a from\r
+C:\devtools\XilinxEDK\sw\XilinxProcessorIPLib\drivers\opbarb_v1_02_a\src\ to\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\ppc405_0\libsrc\op\r
+barb_v1_02_a\ ...\r
+
+\r
+\r
+Copying files for driver uartlite_v1_01_a from\r
+C:\devtools\XilinxEDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_01_a\src\ to\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\ppc405_0\libsrc\ua\r
+rtlite_v1_01_a\ ...\r
+
+\r
+\r
+Copying files for driver gpio_v2_01_a from\r
+C:\devtools\XilinxEDK\sw\XilinxProcessorIPLib\drivers\gpio_v2_01_a\src\ to\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\ppc405_0\libsrc\gp\r
+io_v2_01_a\ ...\r
+
+\r
+\r
+Copying files for driver intc_v1_00_c from\r
+C:\devtools\XilinxEDK\sw\XilinxProcessorIPLib\drivers\intc_v1_00_c\src\ to\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\ppc405_0\libsrc\in\r
+tc_v1_00_c\ ...\r
+
+\r
+\r
+Copying files for driver cpu_ppc405_v1_00_a from\r
+C:\devtools\XilinxEDK\sw\XilinxProcessorIPLib\drivers\cpu_ppc405_v1_00_a\src\ to\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\ppc405_0\libsrc\cp\r
+u_ppc405_v1_00_a\ ...\r
+
+\r
+\r
+Running DRCs for OSes, Drivers and Libraries ... \r
+
+\r
+\r
+Running generate for OS'es, Drivers and Libraries ... \r
+
+\r
+\r
+Running post_generate for OS'es, Drivers and Libraries ... \r
+\r
+Running make for Drivers and Libraries ... \r
+\r
+Configuring make for target include using:\r
+\r
+make -s include "COMPILER=powerpc-eabi-gcc" "ARCHIVER=powerpc-eabi-ar"\r
+"COMPILER_FLAGS= -O2 -c" "EXTRA_COMPILER_FLAGS=-g" \r
+
+\r
+\r
+Configuring make for target libs using:\r
+\r
+make -s libs "COMPILER=powerpc-eabi-gcc" "ARCHIVER=powerpc-eabi-ar"\r
+"COMPILER_FLAGS= -O2 -c" "EXTRA_COMPILER_FLAGS=-g" \r
+
+\r
+Compiling common
+
+\r
+powerpc-eabi-ar: creating ../../../lib/libxil.a
+
+\r
+Compiling ipif
+
+\r
+Compiling bsp
+
+\r
+Compiling plb_arbiter
+
+\r
+Compiling opbarb
+
+\r
+Compiling uartlite
+
+\r
+Compiling gpio
+
+\r
+Compiling intc
+
+\r
+Compiling cpu_ppc405
+
+\r
+\r
+Libraries generated in\r
+C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\PPC405_Xilinx_Virtex4_GCC\ppc405_0\lib\\r
+directory\r
+\r
+Running execs_generate for OS'es, Drivers and Libraries ... \r
+
+\r
+\r
+LibGen Done. \r
+
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 38270 828 99172 138270 21c1e RTOSDemo/executable.elf
+
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:30:44 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+*********************************************
+
+\r
+Downloading Bitstream onto the target board
+
+\r
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+
+\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 1 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+Trying to terminate Process...
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:38:21 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+*********************************************
+
+\r
+Downloading Bitstream onto the target board
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+
+\r
+ Driver windrvr6.sys version = 8.1.1.0.No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+
+\r
+Checking cable driver.\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+make: *** [download] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:40:12 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+
+\r
+*********************************************
+Downloading Bitstream onto the target board
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+Elapsed time = 1 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+make: *** [download] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+\r
+At Local date and time: Tue Mar 04 09:43:23 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+*********************************************
+
+\r
+Downloading Bitstream onto the target board
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+'3':Programming device...\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+ DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.\r
+
+\r
+make: *** [download] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:45:34 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+*********************************************
+
+\r
+Downloading Bitstream onto the target board
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ ECP hardware is detected.\r
+Cable connection established.\r
+Connecting to cable (Parallel Port - LPT1) in ECP mode.\r
+Checking cable driver.\r
+ Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.\r
+ Cable Type = 1, Revision = 3.\r
+ Setting cable speed to 5 MHz.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+
+\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 10000000.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 1 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 10000000.\r
+Chain TCK freq = 10000000.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+'3':Programming device...\r
+
+\r
+done.\r
+'3': Reading status register contents...\r
+CRC error : 0\r
+Decryptor security set : 0\r
+DCM locked : 1\r
+DCI matched : 1\r
+End of startup signal from Startup block : 1\r
+status of GTS_CFG_B : 1\r
+status of GWE : 1\r
+status of GHIGH : 1\r
+value of MODE pin M0 : 1\r
+value of MODE pin M1 : 1\r
+Value of MODE pin M2 : 1\r
+Internal signal indicates when housecleaning is completed: 1\r
+Value driver in from INIT pad : 1\r
+Internal signal indicates that chip is configured : 1\r
+Value of DONE pin : 1\r
+Indicates when ID value written does not match chip ID: 0\r
+Decryptor error Signal : 0\r
+System Monitor Over-Temperature Alarm : 0\r
+INFO:iMPACT:2219 - Status register values:\r
+INFO:iMPACT - 0011 1111 1111 1110 0000 0000 0000 0000 \r
+INFO:iMPACT:579 - '3': Completed downloading bit file to device.\r
+INFO:iMPACT:580 - '3':Checking done pin ....done.\r
+'3': Programmed successfully.\r
+Elapsed time = 2 sec.\r
+// *** BATCH CMD : quit\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+Done.
+\r
+At Local date and time: Tue Mar 04 09:48:55 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_programclean; exit;" started...
+\r
+rm -f RTOSDemo/executable.elf
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 09:48:59 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 38270 828 99172 138270 21c1e RTOSDemo/executable.elf
+
+\r
+
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+At Local date and time: Tue Mar 04 10:22:48 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `xSerialPortInitMinimal':
+RTOSDemo/serial/serial.c:76: error: syntax error before "intc"
+RTOSDemo/serial/serial.c:89: error: `intc' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:89: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:89: error: for each function it appears in.)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:24:18 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `xSerialPortInitMinimal':
+RTOSDemo/serial/serial.c:76: error: syntax error before "xUART"
+RTOSDemo/serial/serial.c:89: error: `xUART' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:89: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:89: error: for each function it appears in.)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:24:52 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `xSerialPortInitMinimal':
+RTOSDemo/serial/serial.c:76: error: syntax error before "xUART"
+RTOSDemo/serial/serial.c:89: error: `xUART' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:89: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:89: error: for each function it appears in.)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:25:18 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `xSerialPortInitMinimal':
+RTOSDemo/serial/serial.c:77: error: syntax error before "xUART"
+RTOSDemo/serial/serial.c:90: error: `xUART' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:90: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:90: error: for each function it appears in.)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:27:29 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `xSerialPortInitMinimal':
+RTOSDemo/serial/serial.c:96: error: `XUL_STATUS_REG_OFFSET' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:96: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:96: error: for each function it appears in.)
+RTOSDemo/serial/serial.c:97: error: `XUL_CONTROL_REG_OFFSET' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:97: error: `XUL_CR_FIFO_TX_RESET' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:97: error: `XUL_CR_FIFO_RX_RESET' undeclared (first use in this function)
+RTOSDemo/serial/serial.c: In function `xSerialPutChar':
+RTOSDemo/serial/serial.c:158: error: `XUL_TX_FIFO_OFFSET' undeclared (first use in this function)
+RTOSDemo/serial/serial.c: In function `vSerialISR':
+RTOSDemo/serial/serial.c:181: error: `XUL_STATUS_REG_OFFSET' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:183: error: `XUL_SR_RX_FIFO_FULL' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:183: error: `XUL_SR_RX_FIFO_VALID_DATA' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:188: error: `XUL_RX_FIFO_OFFSET' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:192: error: `XUL_SR_TX_FIFO_EMPTY' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:199: error: `XUL_TX_FIFO_OFFSET' undeclared (first use in this function)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:27:41 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 40374 848 99256 140478 224be RTOSDemo/executable.elf
+
+\r
+
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+At Local date and time: Tue Mar 04 10:28:45 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -Os RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 40414 848 99248 140510 224de RTOSDemo/executable.elf
+
+\r
+
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:29:00 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 51046 848 99256 151150 24e6e RTOSDemo/executable.elf
+
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+At Local date and time: Tue Mar 04 10:33:15 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 51058 848 99256 151162 24e7a RTOSDemo/executable.elf
+
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:48:35 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/main.c:105: error: parse error before "xInterruptController"
+RTOSDemo/main.c:105: warning: data definition has no type or storage class
+RTOSDemo/main.c: In function `main':
+RTOSDemo/main.c:114: error: `XIntc_InterruptHandler' undeclared (first use in this function)
+RTOSDemo/main.c:114: error: (Each undeclared identifier is reported only once
+RTOSDemo/main.c:114: error: for each function it appears in.)
+RTOSDemo/main.c:116: error: `XPAR_OPB_INTC_0_DEVICE_ID' undeclared (first use in this function)
+RTOSDemo/main.c:117: error: `XIN_REAL_MODE' undeclared (first use in this function)
+
+\r
+RTOSDemo/serial/serial.c: In function `xSerialPortInitMinimal':
+RTOSDemo/serial/serial.c:76: error: syntax error before "xInterruptController"
+RTOSDemo/serial/serial.c:92: error: `xInterruptController' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:92: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:92: error: for each function it appears in.)
+RTOSDemo/serial/serial.c:93: error: `UARTLITE_IRPT_INTR' undeclared (first use in this function)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:49:41 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_programclean; exit;" started...
+\r
+rm -f RTOSDemo/executable.elf
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:49:47 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `xSerialPortInitMinimal':
+RTOSDemo/serial/serial.c:94: error: `UARTLITE_IRPT_INTR' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:94: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:94: error: for each function it appears in.)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 10:50:31 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 54870 872 99280 155022 25d8e RTOSDemo/executable.elf
+
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 11:23:15 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/main.c: In function `prvErrorChecks':
+RTOSDemo/main.c:229: error: too few arguments to function `uxTaskGetStackHighWaterMark'
+RTOSDemo/main.c:239: error: too few arguments to function `uxTaskGetStackHighWaterMark'
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 11:23:44 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `xSerialPortInitMinimal':
+RTOSDemo/serial/serial.c:93: error: `vSerialISR' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:93: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:93: error: for each function it appears in.)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 12:04:46 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `vSerialISR':
+RTOSDemo/serial/serial.c:175: error: `InstancePtr' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:175: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:175: error: for each function it appears in.)
+RTOSDemo/serial/serial.c:177: error: `IsrStatus' undeclared (first use in this function)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 12:05:06 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+RTOSDemo/serial/serial.c: In function `vSerialISR':
+RTOSDemo/serial/serial.c:177: error: `IsrStatus' undeclared (first use in this function)
+RTOSDemo/serial/serial.c:177: error: (Each undeclared identifier is reported only once
+RTOSDemo/serial/serial.c:177: error: for each function it appears in.)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 12:05:44 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 54938 872 99280 155090 25dd2 RTOSDemo/executable.elf
+
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 12:08:57 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 54918 872 99280 155070 25dbe RTOSDemo/executable.elf
+
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+At Local date and time: Tue Mar 04 12:09:55 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+ text data bss dec hex filename
+ 54938 872 99280 155090 25dd2 RTOSDemo/executable.elf
+
+\r
+
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+Done.
+\r
+Done.
+\r
+Done.
+\r
+At Local date and time: Tue Mar 04 12:57:44 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c: In function `vPortISRHandler':
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:235: error: `XIntc_Config' undeclared (first use in this function)
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:235: error: (Each undeclared identifier is reported only once
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:235: error: for each function it appears in.)
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:235: error: `CfgPtr' undeclared (first use in this function)
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:238: error: `XIntc_ConfigTable' undeclared (first use in this function)
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:247: error: `XPAR_INTC_MAX_NUM_INTR_INPUTS' undeclared (first use in this function)
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:252: error: `XIntc_VectorTableEntry' undeclared (first use in this function)
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:252: error: `TablePtr' undeclared (first use in this function)
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:280: error: `XIN_SVC_SGL_ISR_OPTION' undeclared (first use in this function)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 12:58:19 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c: In function `vPortISRHandler':
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:239: error: `XIntc_ConfigTable' undeclared (first use in this function)
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:239: error: (Each undeclared identifier is reported only once
+C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c:239: error: for each function it appears in.)
+
+\r
+make: *** [RTOSDemo/executable.elf] Error 1
+
+\r
+\r
+\r
+Done!
+\r
+At Local date and time: Tue Mar 04 12:59:11 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 54846 872 99272 154990 25d6e RTOSDemo/executable.elf
+
+\r
+
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+Done.
+\r
+Xilinx Platform Studio (XPS)\r
+Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4
+\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.
+\r
+At Local date and time: Wed Mar 05 09:40:31 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make download; exit;" started...
+\r
+
+
+\r
+*********************************************
+Downloading Bitstream onto the target board
+*********************************************
+impact -batch etc/download.cmd
+
+\r
+Release 8.2.02i - iMPACT I.34\r
+Copyright (c) 1995-2006 Xilinx, Inc. All rights reserved.\r
+
+\r
+// *** BATCH CMD : setMode -bs\r
+// *** BATCH CMD : setCable -port auto\r
+AutoDetecting cable. Please wait.\r
+
+\r
+Connecting to cable (Parallel Port - LPT1).\r
+Checking cable driver.\r
+
+\r
+ Driver windrvr6.sys version = 8.1.1.0.
+\r
+No resources.\r
+ LPT base address = 0378h.\r
+ ECP base address = 0778h.\r
+ECP fifo status bits not initialized properly.\r
+Unable to detect the ECP hardware. The hardware may be malfunctioning or the\r
+BIOS setting for the Parallel port is not set to ECP mode.\r
+Cable connection established.\r
+// *** BATCH CMD : identify \r
+
+\r
+Identifying chain contents ....Version is 0101\r
+'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5\r
+PMSPEC -- Overriding Xilinx file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+with local file <c:/devtools/Xilinx/xc9500/data/xc9500.acd>\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xc9500xl/data/xc95144xl.bsd...\r
+
+\r
+INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'2': : Manufacturer's ID =Xilinx xc4vfx12, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/virtex4/data/xc4vfx12.bsd...\r
+
+\r
+INFO:iMPACT:501 - '1': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 1111\r
+'3': : Manufacturer's ID =Xilinx xcf32p, Version : 15\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/xcfp/data/xcf32p.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xcf32p successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+Version is 0000\r
+'4': : Manufacturer's ID =Xilinx xccace, Version : 0\r
+
+\r
+INFO:iMPACT:1777 - \r
+ Reading c:/devtools/Xilinx/acecf/data/xccace.bsd...\r
+INFO:iMPACT:501 - '1': Added Device xccace successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+done.\r
+Chain TCK freq = 0.\r
+'2': Putting device in ISP mode...done.\r
+Chain TCK freq = 0.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+Elapsed time = 3 sec.\r
+// *** BATCH CMD : identifyMPM \r
+Elapsed time = 0 sec.\r
+
+\r
+// *** BATCH CMD : assignFile -p 3 -file "implementation/download.bit"\r
+'3': Loading file 'implementation/download.bit' ...\r
+
+\r
+done.\r
+INFO:iMPACT:501 - '3': Added Device xc4vfx12 successfully.\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+// *** BATCH CMD : program -p 3 \r
+Chain TCK freq = 0.\r
+Chain TCK freq = 0.\r
+Validating chain...\r
+Boundary-scan chain validated successfully.\r
+
+\r
+'3':Programming device...\r
+
+\r
+done.\r
+'3': Reading status register contents...\r
+CRC error : 0\r
+Decryptor security set : 0\r
+DCM locked : 1\r
+DCI matched : 1\r
+End of startup signal from Startup block : 1\r
+status of GTS_CFG_B : 1\r
+status of GWE : 1\r
+status of GHIGH : 1\r
+value of MODE pin M0 : 1\r
+value of MODE pin M1 : 1\r
+Value of MODE pin M2 : 1\r
+Internal signal indicates when housecleaning is completed: 1\r
+Value driver in from INIT pad : 1\r
+Internal signal indicates that chip is configured : 1\r
+Value of DONE pin : 1\r
+Indicates when ID value written does not match chip ID: 0\r
+Decryptor error Signal : 0\r
+System Monitor Over-Temperature Alarm : 0\r
+INFO:iMPACT:2219 - Status register values:\r
+INFO:iMPACT - 0011 1111 1111 1110 0000 0000 0000 0000 \r
+INFO:iMPACT:579 - '3': Completed downloading bit file to device.\r
+INFO:iMPACT:580 - '3':Checking done pin ....done.\r
+'3': Programmed successfully.\r
+Elapsed time = 29 sec.\r
+// *** BATCH CMD : quit\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+----------------------------------------------------------------------\r
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+At Local date and time: Wed Mar 05 09:47:23 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 54834 872 99272 154978 25d62 RTOSDemo/executable.elf
+
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
+At Local date and time: Wed Mar 05 09:58:03 2008
+ xbash -q -c "cd /cygdrive/c/E/Dev/FreeRTOS/WorkingCopy2/Demo/PPC405_Xilinx_Virtex4_GCC/; /usr/bin/make -f system.make RTOSDemo_program; exit;" started...
+\r
+powerpc-eabi-gcc -O0 RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/port.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/tasks.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/list.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/queue.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/MemMang/heap_2.c C:/E/Dev/FreeRTOS/WorkingCopy2/Source/portable/GCC/PPC405/portasm.s C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flash.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/blocktim.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/dynamic.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/flop.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/GenQTest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/integer.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/QPeek.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/semtest.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/BlockQ.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/death.c C:/E/Dev/FreeRTOS/WorkingCopy2/Demo/Common/Minimal/comtest.c -o RTOSDemo/executable.elf \
+ -Wl,-T -Wl,RTOSDemo/RTOSDemo.ld -g -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -L./ppc405_0/lib/ \
+-D GCC_PPC405 -mregnames -Xlinker -Map=rtosdemo.map
+
+\r
+powerpc-eabi-size RTOSDemo/executable.elf
+
+\r
+ text data bss dec hex filename
+ 54746 872 99280 154898 25d12 RTOSDemo/executable.elf
+
+\r
+
+
+\r
+\r
+\r
+Done!
+\r
+Done.
+\r
projects / freertos / commitdiff