Mention "lpc4300" (with "lpc1800" alias) flash drivers in manual

Change-Id: I0bb28910b2c07b1ca5bd644e0d88b931d585d3e7
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1352
Tested-by: jenkins

diff --git a/doc/openocd.texi b/doc/openocd.texi
index cb32998bbc056f44e4debef94935644bb53527c8..1518617150094ac37b462ca614d27cd5de3a572b 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -161,9 +161,9 @@ debugged via the GDB protocol.
 
 @b{Flash Programing:} Flash writing is supported for external CFI
 compatible NOR flashes (Intel and AMD/Spansion command set) and several
-internal flashes (LPC1700, LPC2000, AT91SAM7, AT91SAM3U, STR7x, STR9x, LM3,
-STM32x and EFM32). Preliminary support for various NAND flash controllers
-(LPC3180, Orion, S3C24xx, more) controller is included.
+internal flashes (LPC1700, LPC1800, LPC2000, LPC4300, AT91SAM7, AT91SAM3U,
+STR7x, STR9x, LM3, STM32x and EFM32). Preliminary support for various NAND flash
+controllers (LPC3180, Orion, S3C24xx, more) controller is included.
 
 @section OpenOCD Web Site
 
@@ -5014,8 +5014,9 @@ supported.}
 @end deffn
 
 @deffn {Flash Driver} lpc2000
-Most members of the LPC1700 and LPC2000 microcontroller families from NXP
-include internal flash and use Cortex-M3 (LPC1700) or ARM7TDMI (LPC2000) cores.
+Most members of the LPC1700, LPC1800, LPC2000 and LPC4300 microcontroller
+families from NXP include internal flash and use Cortex-M3 (LPC1700, LPC1800),
+Cortex-M4 (LPC4300) or ARM7TDMI (LPC2000) cores.
 
 @quotation Note
 There are LPC2000 devices which are not supported by the @var{lpc2000}
@@ -5031,7 +5032,9 @@ which must appear in the following order:
 @item @var{variant} ... required, may be
 @option{lpc2000_v1} (older LPC21xx and LPC22xx)
 @option{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx)
-or @option{lpc1700} (LPC175x and LPC176x)
+@option{lpc1700} (LPC175x and LPC176x)
+or @option{lpc4300} - available also as @option{lpc1800} alias (LPC18x[2357] and
+LPC43x[2357])
 @item @var{clock_kHz} ... the frequency, in kiloHertz,
 at which the core is running
 @item @option{calc_checksum} ... optional (but you probably want to provide this!),