static int icdi_jtag_init(void);
static int olimex_jtag_init(void);
static int flyswatter_init(void);
+static int minimodule_init(void);
static int turtle_init(void);
static int comstick_init(void);
static int stm32stick_init(void);
static void jtagkey_reset(int trst, int srst);
static void olimex_jtag_reset(int trst, int srst);
static void flyswatter_reset(int trst, int srst);
+static void minimodule_reset(int trst, int srst);
static void turtle_reset(int trst, int srst);
static void comstick_reset(int trst, int srst);
static void stm32stick_reset(int trst, int srst);
.reset = flyswatter_reset,
.blink = flyswatter_jtag_blink
},
+ { .name = "minimodule",
+ .init = minimodule_init,
+ .reset = minimodule_reset,
+ },
{ .name = "turtelizer2",
.init = turtle_init,
.reset = turtle_reset,
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction);
}
+static void minimodule_reset(int trst, int srst)
+{
+ if (srst == 1)
+ {
+ low_output &= ~nSRST;
+ }
+ else if (srst == 0)
+ {
+ low_output |= nSRST;
+ }
+
+ /* command "set data bits low byte" */
+ buffer_write(0x80);
+ buffer_write(low_output);
+ buffer_write(low_direction);
+ LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction);
+}
+
static void turtle_reset(int trst, int srst)
{
trst = trst;
return ERROR_OK;
}
+static int minimodule_init(void)
+{
+ low_output = 0x18;//check if srst should be 1 or 0 initially. (0x08) (flyswatter was 0x18)
+ low_direction = 0xfb;//0xfb;
+
+ /* initialize low byte for jtag */
+ if (ft2232_set_data_bits_low_byte(low_output,low_direction) != ERROR_OK)
+ {
+ LOG_ERROR("couldn't initialize FT2232 with 'minimodule' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+
+ nSRST = 0x20;
+
+ high_output = 0x00;
+ high_direction = 0x05;
+
+ /* turn red LED3 on, LED2 off */
+ //high_output |= 0x08;
+
+ /* initialize high byte for jtag */
+ if (ft2232_set_data_bits_high_byte(high_output,high_direction) != ERROR_OK)
+ {
+ LOG_ERROR("couldn't initialize FT2232 with 'minimodule' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
static int turtle_init(void)
{
low_output = 0x08;