more arm926ejs bugs

git-svn-id: svn://svn.berlios.de/openocd/trunk@2486 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/TODO b/TODO
index 709cc5a567f0ad6a6d186fbbc4c9418aa0f33917..0922c663ca002416b26119a6ce39f1e893b7141c 100644 (file)
--- a/TODO
+++ b/TODO
@@ -22,6 +22,25 @@ https://lists.berlios.de/pipermail/openocd-development/2009-July/009206.html
 - reset run/halt/step for arm926ejs is not robust. Needs lots of testing to
 map out problems.
 
+- i.MX27 reset run problems. Notice below that even if the target is running,
+a EICE_DBG_STATUS_DBGACK(I think...) is detected and OpenOCD wrongly believes that the
+target is halted. Polling the target afterwards reveals that the
+target is running. Notice the MOE=0xe value.
+
+> reset run
+JTAG tap: imx27.bs tap/device found: 0x1b900f0f (mfg: 0x787, part: 0xb900, ver: 0x1)
+JTAG Tap/device matched
+JTAG tap: imx27.cpu tap/device found: 0x07926121 (mfg: 0x090, part: 0x7926, ver: 0x0)
+JTAG Tap/device matched
+WARNING: unknown debug reason: 0xe
+target state: halted
+target halted in ARM state due to debug-request, current mode: User
+cpsr: 0x00000000 pc: 0xffffffe8
+MMU: disabled, D-Cache: disabled, I-Cache: disabled
+
+
+
+
 @section thelisttcl TCL
 
 This section provides possible things to improve with OpenOCD's TCL support.