-\input texinfo @c -*-texinfo-*-
-@c %**start of header
-@setfilename openocd.info
-@settitle Open On-Chip Debugger (openocd)
-@c %**end of header
-
-@include version.texi
-
-@titlepage
-@title Open On-Chip Debugger (openocd)
-@subtitle Edition @value{EDITION} for openocd version @value{VERSION}
-@subtitle @value{UPDATED}
-@page
-@vskip 0pt plus 1filll
-@end titlepage
-
-@contents
-
-@node Top, About, , (dir)
-@top OpenOCD
-
-This is edition @value{EDITION} of the openocd manual for version
-@value{VERSION}, @value{UPDATED}
-
-@menu
-* About:: About Openocd.
-* Developers::
-* Building:: Building Openocd
-* Running:: Running Openocd
-* Configuration:: Openocd Configuration.
-* Commands:: Openocd Commands
-* Sample Scripts:: Sample Target Scripts
-* GDB and Openocd:: Using GDB and Openocd
-* FAQ:: Frequently Asked Questions
-* License:: GNU Free Documentation License
-* Index:: Main index.
-@end menu
-
-@node About
-@unnumbered About
-@cindex about
-
-The Open On-Chip Debugger (openocd) aims to provide debugging, in-system programming
-and boundary-scan testing for embedded target devices. The targets are interfaced
-using JTAG (IEEE 1149.1) compliant hardware, but this may be extended to other
-connection types in the future.
-
-Openocd currently supports Wiggler (clones), FTDI FT2232 based JTAG interfaces, the
-Amontec JTAG Accelerator, and the Gateworks GW1602. It allows ARM7 (ARM7TDMI and ARM720t),
-ARM9 (ARM920t, ARM922t, ARM926ej--s, ARM966e--s), XScale (PXA25x, IXP42x) and
-Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged.
-
-Flash writing is supported for external CFI compatible flashes (Intel and AMD/Spansion
-command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3
-and STM32x). Preliminary support for using the LPC3180's NAND flash controller is included.
-
-@node Developers
-@chapter Developers
-@cindex developers
-
-Openocd has been created by Dominic Rath as part of a diploma thesis written at the
-University of Applied Sciences Augsburg (@uref{http://www.fh-augsburg.de}).
-Others interested in improving the state of free and open debug and testing technology
-are welcome to participate.
-
-Other developers have contributed support for additional targets and flashes as well
-as numerous bugfixes and enhancements. See the AUTHORS file for regular contributors.
-
-@node Building
-@chapter Building
-@cindex building openocd
-
-You can download the current SVN version with SVN client of your choice from the
-following repositories:
-
- (@uref{svn://svn.berlios.de/openocd/trunk})
-
-or
-
- (@uref{http://svn.berlios.de/svnroot/repos/openocd/trunk})
-
-Using the SVN command line client, you could use the following command to fetch the
-latest version (make sure there is no (non-svn) directory called "openocd" in the
-current directory):
-
-@smallexample
- svn checkout svn://svn.berlios.de/openocd/trunk
-@end smallexample
-
-Building the OpenOCD requires a recent version of the GNU autotools.
-On my build system, I'm using autoconf 2.13 and automake 1.9. For building on Windows,
-you have to use Cygwin. Make sure that your @env{PATH} environment variable contains no
-other locations with Unix utils (like UnxUtils) - these can't handle the Cygwin
-paths, resulting in obscure dependency errors (This is an observation I've gathered
-from the logs of one user - correct me if I'm wrong).
-
-You further need the appropriate driver files, if you want to build support for
-a FTDI FT2232 based interface:
-@itemize @bullet
-@item @b{ftdi2232} libftdi (@uref{http://www.intra2net.com/opensource/ftdi/})
-@item @b{ftd2xx} libftd2xx (@uref{http://www.ftdichip.com/Drivers/D2XX.htm})
-@item When using the Amontec JTAGkey, you have to get the drivers from the Amontec
-homepage (@uref{www.amontec.com}), as the JTAGkey uses a non-standard VID/PID.
-@end itemize
-
-Please note that the ftdi2232 variant (using libftdi) isn't supported under Cygwin.
-You have to use the ftd2xx variant (using FTDI's D2XX) on Cygwin.
-
-In general, the D2XX driver provides superior performance (several times as fast),
-but has the draw-back of being binary-only - though that isn't as worse, as it isn't
-a kernel module, only a user space library.
-
-To build OpenOCD (on both Linux and Cygwin), use the following commands:
-@smallexample
- ./bootstrap
-@end smallexample
-Bootstrap generates the configure script, and prepares building on your system.
-@smallexample
- ./configure
-@end smallexample
-Configure generates the Makefiles used to build OpenOCD
-@smallexample
- make
-@end smallexample
-Make builds the OpenOCD, and places the final executable in ./src/
-
-The configure script takes several options, specifying which JTAG interfaces
-should be included:
-
-@itemize @bullet
-@item
---enable-parport
-@item
---enable-parport_ppdev
-@item
---enable-amtjtagaccel
-@item
---enable-ft2232_ftd2xx
-@footnote{Using the latest D2XX drivers from FTDI and following their installation
-instructions, I had to use @option{--enable-ft2232_libftd2xx} for the OpenOCD to
-build properly}
-@item
---enable-ft2232_libftdi
-@item
---with-ftd2xx=/path/to/d2xx/
-@end itemize
-
-If you want to access the parallel port using the PPDEV interface you have to specify
-both the @option{--enable-parport} AND the @option{--enable-parport_ppdev} option since
-the @option{--enable-parport_ppdev} option actually is an option to the parport driver
-(see @uref{http://forum.sparkfun.com/viewtopic.php?t=3795} for more info).
-
-Cygwin users have to specify the location of the FTDI D2XX package. This should be an
-absolute path containing no spaces.
-
-Linux users should copy the various parts of the D2XX package to the appropriate
-locations, i.e. /usr/include, /usr/lib.
-
-@node Running
-@chapter Running
-@cindex running openocd
-@cindex --configfile
-@cindex --debug_level
-@cindex --logfile
-@cindex --search
-The OpenOCD runs as a daemon, waiting for connections from clients (Telnet or GDB).
-Run with @option{--help} or @option{-h} to view the available command line arguments.
-
-It reads its configuration by default from the file openocd.cfg located in the current
-working directory. This may be overwritten with the @option{-f <configfile>} command line
-switch.
-
-To enable debug output (when reporting problems or working on OpenOCD itself), use
-the @option{-d} command line switch. This sets the debug_level to "3", outputting
-the most information, including debug messages. The default setting is "2", outputting
-only informational messages, warnings and errors. You can also change this setting
-from within a telnet or gdb session (@option{debug_level <n>}).
-
-You can redirect all output from the daemon to a file using the @option{-l <logfile>} switch.
-
-Search paths for config/script files can be added to openocd by using
-the @option{-s <search>} switch.
-
-@node Configuration
-@chapter Configuration
-@cindex configuration
-The Open On-Chip Debugger (OpenOCD) runs as a daemon, and reads it current configuration
-by default from the file openocd.cfg in the current directory. A different configuration
-file can be specified with the @option{-f <conf.file>} given at the openocd command line.
-
-The configuration file is used to specify on which ports the daemon listens for new
-connections, the JTAG interface used to connect to the target, the layout of the JTAG
-chain, the targets that should be debugged, and connected flashes.
-
-@section Daemon configuration
-
-@itemize @bullet
-@item @b{telnet_port} <@var{number}>
-@cindex telnet_port
-Port on which to listen for incoming telnet connections
-@item @b{gdb_port} <@var{number}>
-@cindex gdb_port
-First port on which to listen for incoming GDB connections. The GDB port for the
-first target will be gdb_port, the second target will listen on gdb_port + 1, and so on.
-@item @b{gdb_detach} <@var{resume|reset|halt|nothing}>
-@cindex gdb_detach
-Configures what openocd will do when gdb detaches from the daeman.
-Default behaviour is <@var{resume}>
-@item @b{gdb_memory_map} <@var{enable|disable}>
-@cindex gdb_memory_map
-Set to <@var{enable}> so that openocd will send the memory configuration to gdb when
-requested. gdb will then know when to set hardware breakpoints, and program flash
-using the gdb load command. @option{gdb_flash_program enable} will also need enabling
-for flash programming to work.
-Default behaviour is <@var{disable}>
-@item @b{gdb_flash_program} <@var{enable|disable}>
-@cindex gdb_flash_program
-Set to <@var{enable}> so that openocd will program the flash memory when a
-vFlash packet is received.
-Default behaviour is <@var{disable}>
-@item @b{daemon_startup} <@var{mode}> either @samp{attach} or @samp{reset}
-@cindex daemon_startup
-Tells the OpenOCD whether it should reset the target when the daemon is launched, or
-if it should just attach to the target.
-@end itemize
-
-@section JTAG interface configuration
-
-@itemize @bullet
-@item @b{interface} <@var{name}>
-@cindex interface
-Use the interface driver <@var{name}> to connect to the target. Currently supported
-interfaces are
-@itemize @minus
-@item parport
-PC parallel port bit-banging (Wigglers, PLD download cable, ...)
-@end itemize
-@itemize @minus
-@item amt_jtagaccel
-Amontec Chameleon in its JTAG Accelerator configuration connected to a PC's EPP
-mode parallel port
-@end itemize
-@itemize @minus
-@item ft2232
-FTDI FT2232 based devices using either the open-source libftdi or the binary only
-FTD2XX driver. The FTD2XX is superior in performance, but not available on every
-platform. The libftdi uses libusb, and should be portable to all systems that provide
-libusb.
-@end itemize
-@itemize @minus
-@item ep93xx
-Cirrus Logic EP93xx based single-board computer bit-banging (in development)
-@end itemize
-@end itemize
-
-@itemize @bullet
-@item @b{jtag_speed} <@var{number}>
-@cindex jtag_speed
-Limit the maximum speed of the JTAG interface. Usually, a value of zero means maximum
-speed. The actual effect of this option depends on the JTAG interface used.
-
-@itemize @minus
-@item wiggler: maximum speed / @var{number}
-@item ft2232: 6MHz / (@var{number}+1)
-@item amt jtagaccel: 8 / 2**@var{number}
-@end itemize
-
-Note: Make sure the jtag clock is no more than @math{1/6th × CPU-Clock}. This is
-especially true for synthesized cores (-S).
-
-@item @b{reset_config} <@var{signals}> [@var{combination}] [@var{trst_type}] [@var{srst_type}]
-@cindex reset_config
-The configuration of the reset signals available on the JTAG interface AND the target.
-If the JTAG interface provides SRST, but the target doesn't connect that signal properly,
-then OpenOCD can't use it. <@var{signals}> can be @samp{none}, @samp{trst_only},
-@samp{srst_only} or @samp{trst_and_srst}.
-[@var{combination}] is an optional value specifying broken reset signal implementations.
-@samp{srst_pulls_trst} states that the testlogic is reset together with the reset of
-the system (e.g. Philips LPC2000, "broken" board layout), @samp{trst_pulls_srst} says
-that the system is reset together with the test logic (only hypothetical, I haven't
-seen hardware with such a bug, and can be worked around).
-
-The [@var{trst_type}] and [@var{srst_type}] parameters allow the driver type of the
-reset lines to be specified. Possible values are @samp{trst_push_pull} (default)
-and @samp{trst_open_drain} for the test reset signal, and @samp{srst_open_drain}
-(default) and @samp{srst_push_pull} for the system reset. These values only affect
-JTAG interfaces with support for different drivers, like the Amontec JTAGkey and JTAGAccelerator.
-
-@item @b{jtag_device} <@var{IR length}> <@var{IR capture}> <@var{IR mask}> <@var{IDCODE instruction}>
-@cindex jtag_device
-Describes the devices that form the JTAG daisy chain, with the first device being
-the one closest to TDO. The parameters are the length of the instruction register
-(4 for all ARM7/9s), the value captured during Capture-IR (0x1 for ARM7/9), and a mask
-of bits that should be validated when doing IR scans (all four bits (0xf) for ARM7/9).
-The IDCODE instruction will in future be used to query devices for their JTAG
-identification code. This line is the same for all ARM7 and ARM9 devices.
-Other devices, like CPLDs, require different parameters. An example configuration
-line for a Xilinx XC9500 CPLD would look like this:
-@smallexample
-jtag_device 8 0x01 0x0e3 0xfe
-@end smallexample
-The instruction register (IR) is 8 bits long, during Capture-IR 0x01 is loaded into
-the IR, but only bits 0-1 and 5-7 should be checked, the others (2-4) might vary.
-The IDCODE instruction is 0xfe.
-
-@item @b{jtag_nsrst_delay} <@var{ms}>
-@cindex jtag_nsrst_delay
-How long (in miliseconds) the OpenOCD should wait after deasserting nSRST before
-starting new JTAG operations.
-@item @b{jtag_ntrst_delay} <@var{ms}>
-@cindex jtag_ntrst_delay
-How long (in miliseconds) the OpenOCD should wait after deasserting nTRST before
-starting new JTAG operations.
-
-The jtag_n[st]rst_delay options are useful if reset circuitry (like a reset supervisor,
-or on-chip features) keep a reset line asserted for some time after the external reset
-got deasserted.
-@end itemize
-
-@section parport options
-
-@itemize @bullet
-@item @b{parport_port} <@var{number}>
-@cindex parport_port
-Either the address of the I/O port (default: 0x378 for LPT1) or the number of
-the @file{/dev/parport} device
-
-When using PPDEV to access the parallel port, use the number of the parallel port:
-@option{parport_port 0} (the default). If @option{parport_port 0x378} is specified
-you may encounter a problem.
-@item @b{parport_cable} <@var{name}>
-@cindex parport_cable
-The layout of the parallel port cable used to connect to the target.
-Currently supported cables are
-@itemize @minus
-@item wiggler
-@cindex wiggler
-Original Wiggler layout, also supported by several clones, such
-as the Olimex ARM-JTAG
-@item old_amt_wiggler
-@cindex old_amt_wiggler
-The Wiggler configuration that comes with Amontec's Chameleon Programmer. The new
-version available from the website uses the original Wiggler layout ('@var{wiggler}')
-@item chameleon
-@cindex chameleon
-Describes the connection of the Amontec Chameleon's CPLD when operated in
-configuration mode. This is only used to program the Chameleon itself, not
-a connected target.
-@item dlc5
-@cindex dlc5
-Xilinx Parallel cable III.
-@item triton
-@cindex triton
-The parallel port adapter found on the 'Karo Triton 1 Development Board'.
-This is also the layout used by the HollyGates design
-(see @uref{http://www.lartmaker.nl/projects/jtag/}).
-@item flashlink
-@cindex flashlink
-ST Parallel cable.
-@end itemize
-@item @b{parport_write_on_exit} <@var{on|off}>
-@cindex parport_write_on_exit
-This will configure the parallel driver to write a known value to the parallel
-interface on exiting openocd
-@end itemize
-
-@section amt_jtagaccel options
-@itemize @bullet
-@item @b{parport_port} <@var{number}>
-@cindex parport_port
-Either the address of the I/O port (default: 0x378 for LPT1) or the number of the
-@file{/dev/parport} device
-@end itemize
-@section ft2232 options
-
-@itemize @bullet
-@item @b{ft2232_device_desc} <@var{description}>
-@cindex ft2232_device_desc
-The USB device description of the FTDI FT2232 device. If not specified, the FTDI
-default value is used. This setting is only valid if compiled with FTD2XX support.
-@item @b{ft2232_layout} <@var{name}>
-@cindex ft2232_layout
-The layout of the FT2232 GPIO signals used to control output-enables and reset
-signals. Valid layouts are
-@itemize @minus
-@item usbjtag
-The "USBJTAG-1" layout described in the original OpenOCD diploma thesis
-@item jtagkey
-Amontec JTAGkey and JTAGkey-tiny
-@item signalyzer
-Signalyzer
-@item olimex-jtag
-Olimex ARM-USB-OCD
-@item m5960
-American Microsystems M5960
-@item evb_lm3s811
-Luminary Micro EVB_LM3S811 as a JTAG interface (not onboard processor), no TRST or
-SRST signals on external connector
-@item comstick
-Hitex STR9 comstick
-@item stm32stick
-Hitex STM32 Performance Stick
-@item flyswatter
-Tin Can Tools Flyswatter
-@item turtelizer2
-egnite Software turtelizer2
-@item oocdlink
-OOCDLink
-@end itemize
-
-@item @b{ft2232_vid_pid} <@var{vid}> <@var{pid}>
-The vendor ID and product ID of the FTDI FT2232 device. If not specified, the FTDI
-default values are used. This command is not available on Windows.
-@item @b{ft2232_latency} <@var{ms}>
-On some systems using ft2232 based JTAG interfaces the FT_Read function call in
-ft2232_read() fails to return the expected number of bytes. This can be caused by
-USB communication delays and has proved hard to reproduce and debug. Setting the
-FT2232 latency timer to a larger value increases delays for short USB packages but it
-also reduces the risk of timeouts before receiving the expected number of bytes.
-The OpenOCD default value is 2 and for some systems a value of 10 has proved useful.
-@end itemize
-
-@section ep93xx options
-@cindex ep93xx options
-Currently, there are no options available for the ep93xx interface.
-
-@page
-@section Target configuration
-
-@itemize @bullet
-@item @b{target} <@var{type}> <@var{endianess}> <@var{reset_mode}> <@var{JTAG pos}>
-<@var{variant}>
-@cindex target
-Defines a target that should be debugged. Currently supported types are:
-@itemize @minus
-@item arm7tdmi
-@item arm720t
-@item arm9tdmi
-@item arm920t
-@item arm922t
-@item arm926ejs
-@item arm966e
-@item cortex_m3
-@item xscale
-@end itemize
-
-If you want to use a target board that is not on this list, see Adding a new
-target board
-
-Endianess may be @option{little} or @option{big}.
-
-The reset_mode specifies what should happen to the target when a reset occurs:
-@itemize @minus
-@item reset_halt
-@cindex reset_halt
-Immediately request a target halt after reset. This allows targets to be debugged
-from the very first instruction. This is only possible with targets and JTAG
-interfaces that correctly implement the reset signals.
-@item reset_init
-@cindex reset_init
-Similar to @option{reset_halt}, but executes the script file defined to handle the
-'reset' event for the target. Like @option{reset_halt} this only works with
-correct reset implementations.
-@item reset_run
-@cindex reset_run
-Simply let the target run after a reset.
-@item run_and_halt
-@cindex run_and_halt
-Let the target run for some time (default: 1s), and then request halt.
-@item run_and_init
-@cindex run_and_init
-A combination of @option{reset_init} and @option{run_and_halt}. The target is allowed
-to run for some time, then halted, and the @option{reset} event script is executed.
-@end itemize
-
-On JTAG interfaces / targets where system reset and test-logic reset can't be driven
-completely independent (like the LPC2000 series), or where the JTAG interface is
-unavailable for some time during startup (like the STR7 series), you can't use
-@option{reset_halt} or @option{reset_init}.
-
-@item @b{target_script} <@var{target#}> <@var{event}> <@var{script_file}>
-@cindex target_script
-Event is either @option{reset}, @option{post_halt}, @option{pre_resume} or @option{gdb_program_config}
-
-TODO: describe exact semantic of events
-@item @b{run_and_halt_time} <@var{target#}> <@var{time_in_ms}>
-@cindex run_and_halt_time
-The amount of time the debugger should wait after releasing reset before it asserts
-a debug request. This is used by the @option{run_and_halt} and @option{run_and_init}
-reset modes.
-@item @b{working_area} <@var{target#}> <@var{address}> <@var{size}>
-<@var{backup}|@var{nobackup}>
-@cindex working_area
-Specifies a working area for the debugger to use. This may be used to speed-up
-downloads to target memory and flash operations, or to perform otherwise unavailable
-operations (some coprocessor operations on ARM7/9 systems, for example). The last
-parameter decides whether the memory should be preserved <@var{backup}>. If possible, use
-a working_area that doesn't need to be backed up, as that slows down operation.
-@end itemize
-
-@subsection arm7tdmi options
-@cindex arm7tdmi options
-target arm7tdmi <@var{endianess}> <@var{reset_mode}> <@var{jtag#}>
-The arm7tdmi target definition requires at least one additional argument, specifying
-the position of the target in the JTAG daisy-chain. The first JTAG device is number 0.
-The optional [@var{variant}] parameter has been removed in recent versions.
-The correct feature set is determined at runtime.
-
-@subsection arm720t options
-@cindex arm720t options
-ARM720t options are similar to ARM7TDMI options.
-
-@subsection arm9tdmi options
-@cindex arm9tdmi options
-ARM9TDMI options are similar to ARM7TDMI options. Supported variants are
-@option{arm920t}, @option{arm922t} and @option{arm940t}.
-This enables the hardware single-stepping support found on these cores.
-
-@subsection arm920t options
-@cindex arm920t options
-ARM920t options are similar to ARM9TDMI options.
-
-@subsection arm966e options
-@cindex arm966e options
-ARM966e options are similar to ARM9TDMI options.
-
-@subsection xscale options
-@cindex xscale options
-Supported variants are @option{ixp42x}, @option{ixp45x}, @option{ixp46x},
-@option{pxa250}, @option{pxa255}, @option{pxa26x}.
-
-@section Flash configuration
-@cindex Flash configuration
-
-@itemize @bullet
-@item @b{flash bank} <@var{driver}> <@var{base}> <@var{size}> <@var{chip_width}>
-<@var{bus_width}> <@var{target#}> [@var{driver_options ...}]
-@cindex flash bank
-Configures a flash bank at <@var{base}> of <@var{size}> bytes and <@var{chip_width}>
-and <@var{bus_width}> bytes using the selected flash <driver>.
-
-@item @b{flash auto_erase} <@option{on}|@option{off}>
-@cindex flash auto_erase
-auto erase flash banks prior to writing. Currently only works when using
-@option{flash write_image} command. Default is @option{off}.
-@end itemize
-
-@subsection lpc2000 options
-@cindex lpc2000 options
-
-@b{flash bank lpc2000} <@var{base}> <@var{size}> 0 0 <@var{target#}> <@var{variant}>
-<@var{clock}> [@var{calc_checksum}]
-LPC flashes don't require the chip and bus width to be specified. Additional
-parameters are the <@var{variant}>, which may be @var{lpc2000_v1} (older LPC21xx and LPC22xx)
-or @var{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx), the number
-of the target this flash belongs to (first is 0), the frequency at which the core
-is currently running (in kHz - must be an integral number), and the optional keyword
-@var{calc_checksum}, telling the driver to calculate a valid checksum for the exception
-vector table.
-
-@subsection cfi options
-@cindex cfi options
-
-@b{flash bank cfi} <@var{base}> <@var{size}> <@var{chip_width}> <@var{bus_width}>
-<@var{target#}>
-CFI flashes require the number of the target they're connected to as an additional
-argument. The CFI driver makes use of a working area (specified for the target)
-to significantly speed up operation.
-
-@var{chip_width} and @var{bus_width} are specified in bytes.
-
-@subsection at91sam7 options
-@cindex at91sam7 options
-
-@b{flash bank at91sam7} 0 0 0 0 <@var{target#}>
-AT91SAM7 flashes only require the @var{target#}, all other values are looked up after
-reading the chip-id and type.
-
-@subsection str7 options
-@cindex str7 options
-
-@b{flash bank str7x} <@var{base}> <@var{size}> 0 0 <@var{target#}> <@var{variant}>
-variant can be either STR71x, STR73x or STR75x.
-
-@subsection str9 options
-@cindex str9 options
-
-@b{flash bank str9x} <@var{base}> <@var{size}> 0 0 <@var{target#}>
-The str9 needs the flash controller to be configured prior to Flash programming, eg.
-@smallexample
-str9x flash_config 0 4 2 0 0x80000
-@end smallexample
-This will setup the BBSR, NBBSR, BBADR and NBBADR registers respectively.
-
-@subsection str9 options (str9xpec driver)
-
-@b{flash bank str9xpec} <@var{base}> <@var{size}> 0 0 <@var{target#}>
-Before using the flash commands the turbo mode will need enabling using str9xpec
-@option{enable_turbo} <@var{num>.}
-
-Only use this driver for locking/unlocking the device or configuring the option bytes.
-Use the standard str9 driver for programming.
-
-@subsection stellaris (LM3Sxxx) options
-@cindex stellaris (LM3Sxxx) options
-
-@b{flash bank stellaris} <@var{base}> <@var{size}> 0 0 <@var{target#}>
-stellaris flash plugin only require the @var{target#}.
-
-@subsection stm32x options
-@cindex stm32x options
-
-@b{flash bank stm32x} <@var{base}> <@var{size}> 0 0 <@var{target#}>
-stm32x flash plugin only require the @var{target#}.
-
-@node Commands
-@chapter Commands
-@cindex commands
-
-The Open On-Chip Debugger (OpenOCD) allows user interaction through a telnet interface
-(default: port 4444) and a GDB server (default: port 3333). The command line interpreter
-is available from both the telnet interface and a GDB session. To issue commands to the
-interpreter from within a GDB session, use the @option{monitor} command, e.g. use
-@option{monitor poll} to issue the @option{poll} command. All output is relayed through the
-GDB session.
-
-@section Daemon
-
-@itemize @bullet
-@item @b{sleep} <@var{msec}>
-@cindex sleep
-Wait for n milliseconds before resuming. Useful in connection with script files
-(@var{script} command and @var{target_script} configuration).
-
-@item @b{shutdown}
-@cindex shutdown
-Close the OpenOCD daemon, disconnecting all clients (GDB, Telnet).
-
-@item @b{debug_level} [@var{n}]
-@cindex debug_level
-Display or adjust debug level to n<0-3>
-
-@item @b{log_output} <@var{file}>
-@cindex log_output
-Redirect logging to <file> (default: stderr)
-
-@item @b{script} <@var{file}>
-@cindex script
-Execute commands from <file>
-
-@end itemize
-
-@subsection Target state handling
-@itemize @bullet
-@item @b{poll} [@option{on}|@option{off}]
-@cindex poll
-Poll the target for its current state. If the target is in debug mode, architecture
-specific information about the current state are printed. An optional parameter
-allows continuous polling to be enabled and disabled.
-
-@item @b{halt} [@option{ms}]
-@cindex halt
-Send a halt request to the target and waits for it to halt for [@option{ms}].
-Default [@option{ms}] is 5 seconds if no arg given.
-Optional arg @option{ms} is a timeout in milliseconds. Using 0 as the [@option{ms}]
-will stop openocd from waiting.
-
-@item @b{wait_halt} [@option{ms}]
-@cindex wait_halt
-Wait for the target to enter debug mode. Optional [@option{ms}] is
-a timeout in milliseconds. Default [@option{ms}] is 5 seconds if no
-arg given.
-
-@item @b{resume} [@var{address}]
-@cindex resume
-Resume the target at its current code position, or at an optional address.
-Openocd will wait 5 seconds for the target to resume.
-
-@item @b{step} [@var{address}]
-@cindex step
-Single-step the target at its current code position, or at an optional address.
-
-@item @b{reset} [@option{run}|@option{halt}|@option{init}|@option{run_and_halt}
-|@option{run_and_init}]
-@cindex reset
-Do a hard-reset. The optional parameter specifies what should happen after the reset.
-This optional parameter overwrites the setting specified in the configuration file,
-making the new behaviour the default for the @option{reset} command.
-@itemize @minus
-@item run
-@cindex reset run
-Let the target run.
-@item halt
-@cindex reset halt
-Immediately halt the target (works only with certain configurations).
-@item init
-@cindex reset init
-Immediately halt the target, and execute the reset script (works only with certain
-configurations)
-@item run_and_halt
-@cindex reset run_and_halt
-Let the target run for a certain amount of time, then request a halt.
-@item run_and_init
-@cindex reset run_and_init
-Let the target run for a certain amount of time, then request a halt. Execute the
-reset script once the target entered debug mode.
-@end itemize
-@end itemize
-
-@subsection Memory access commands
-These commands allow accesses of a specific size to the memory system:
-@itemize @bullet
-@item @b{mdw} <@var{addr}> [@var{count}]
-@cindex mdw
-display memory words
-@item @b{mdh} <@var{addr}> [@var{count}]
-@cindex mdh
-display memory half-words
-@item @b{mdb} <@var{addr}> [@var{count}]
-@cindex mdb
-display memory bytes
-@item @b{mww} <@var{addr}> <@var{value}>
-@cindex mww
-write memory word
-@item @b{mwh} <@var{addr}> <@var{value}>
-@cindex mwh
-write memory half-word
-@item @b{mwb} <@var{addr}> <@var{value}>
-@cindex mwb
-write memory byte
-
-@item @b{load_image} <@var{file}> <@var{address}> [@option{bin}|@option{ihex}|@option{elf}]
-@cindex load_image
-Load image <@var{file}> to target memory at <@var{address}>
-@item @b{dump_image} <@var{file}> <@var{address}> <@var{size}>
-@cindex dump_image
-Dump <@var{size}> bytes of target memory starting at <@var{address}> to a
-(binary) <@var{file}>.
-@item @b{verify_image} <@var{file}> <@var{address}> [@option{bin}|@option{ihex}|@option{elf}]
-@cindex verify_image
-Verify <@var{file}> to target memory starting at <@var{address}>.
-This will first attempt using a crc checksum, if this fails it will try a binary compare.
-@item @b{load_binary} <@var{file}> <@var{address}> [DEPRECATED]
-@cindex load_binary
-Load binary <@var{file}> to target memory at <@var{address}>
-@item @b{dump_binary} <@var{file}> <@var{address}> <@var{size}> [DEPRECATED]
-@cindex dump_binary
-Dump <@var{size}> bytes of target memory starting at <@var{address}> to a
-(binary) <@var{file}>.
-@end itemize
-
-@subsection Flash commands
-@cindex Flash commands
-@itemize @bullet
-@item @b{flash banks}
-@cindex flash banks
-List configured flash banks
-@item @b{flash info} <@var{num}>
-@cindex flash info
-Print info about flash bank <@option{num}>
-@item @b{flash probe} <@var{num}>
-@cindex flash probe
-Identify the flash, or validate the parameters of the configured flash. Operation
-depends on the flash type.
-@item @b{flash erase_check} <@var{num}>
-@cindex flash erase_check
-Check erase state of sectors in flash bank <@var{num}>. This is the only operation that
-updates the erase state information displayed by @option{flash info}. That means you have
-to issue an @option{erase_check} command after erasing or programming the device to get
-updated information.
-@item @b{flash protect_check} <@var{num}>
-@cindex flash protect_check
-Check protection state of sectors in flash bank <num>.
-
-@item @b{flash erase} <@var{num}> <@var{first}> <@var{last}> [DEPRECATED]
-@cindex flash erase
-Erase sectors at bank <@var{num}>, starting at sector <@var{first}> up to and including
-<@var{last}>. Sector numbering starts at 0. Depending on the flash type, erasing might
-require the protection to be disabled first (e.g. Intel Advanced Bootblock flash using
-the CFI driver). This command was replaced by the new command
-@option{flash erase_sector} using the same syntax.
-@item @b{flash erase_sector} <@var{num}> <@var{first}> <@var{last}>
-@cindex flash erase_sector
-Erase sectors at bank <@var{num}>, starting at sector <@var{first}> up to and including
-<@var{last}>. Sector numbering starts at 0. Depending on the flash type, erasing might
-require the protection to be disabled first (e.g. Intel Advanced Bootblock flash using
-the CFI driver).
-@item @b{flash erase_address} <@var{address}> <@var{length}>
-@cindex flash erase_address
-Erase sectors starting at <@var{address}> for <@var{length}> number of bytes
-@item @b{flash write} <@var{num}> <@var{file}> <@var{offset}> [DEPRECATED]
-@cindex flash write
-Write the binary <@var{file}> to flash bank <@var{num}>, starting at <@var{offset}>
-bytes from the beginning of the bank. This command was replaced by the new command
-@option{flash write_binary} using the same syntax.
-@item @b{flash write_binary} <@var{num}> <@var{file}> <@var{offset}>
-@cindex flash write_binary
-Write the binary <@var{file}> to flash bank <@var{num}>, starting at
-<@option{offset}> bytes from the beginning of the bank.
-@item @b{flash write_image} <@var{file}> [@var{offset}] [@var{type}]
-@cindex flash write_image
-Write the image <@var{file}> to the current target's flash bank(s). A relocation
-[@var{offset}] can be specified and the file [@var{type}] can be specified
-explicitly as @option{bin} (binary), @option{ihex} (Intel hex), @option{elf}
-(ELF file) or @option{s19} (Motorola s19).
-@item @b{flash protect} <@var{num}> <@var{first}> <@var{last}> <@option{on}|@option{off}>
-@cindex flash protect
-Enable (@var{on}) or disable (@var{off}) protection of flash sectors <@var{first}> to
-<@var{last}> of @option{flash bank} <@var{num}>.
-@item @b{flash auto_erase} <@var{on}|@var{off}>
-@cindex flash auto_erase
-Enable (@option{on}) to erase flash banks prior to writing using the flash @option{write_image} command
-only. Default is (@option{off}), flash banks have to be erased using @option{flash erase} command.
-@end itemize
-
-@page
-@section Target Specific Commands
-@cindex Target Specific Commands
-
-@subsection AT91SAM7 specific commands
-@cindex AT91SAM7 specific commands
-The flash configuration is deduced from the chip identification register. The flash
-controller handles erases automatically on a page (128/265 byte) basis so erase is
-not necessary for flash programming. AT91SAM7 processors with less than 512K flash
-only have a single flash bank embedded on chip. AT91SAM7xx512 have two flash planes
-that can be erased separatly.Only an EraseAll command is supported by the controller
-for each flash plane and this is called with
-@itemize @bullet
-@item @b{flash erase} <@var{num}> @var{first_plane} @var{last_plane}
-bulk erase flash planes first_plane to last_plane.
-@item @b{at91sam7 gpnvm} <@var{num}> <@var{bit}> <@option{set}|@option{clear}>
-@cindex at91sam7 gpnvm
-set or clear a gpnvm bit for the processor
-@end itemize
-
-@subsection STR9 specific commands
-@cindex STR9 specific commands
-These are flash specific commands when using the str9xpec driver.
-@itemize @bullet
-@item @b{str9xpec enable_turbo} <@var{num}>
-@cindex str9xpec enable_turbo
-enable turbo mode, simply this will remove the str9 from the chain and talk
-directly to the embedded flash controller.
-@item @b{str9xpec disable_turbo} <@var{num}>
-@cindex str9xpec disable_turbo
-restore the str9 into jtag chain.
-@item @b{str9xpec lock} <@var{num}>
-@cindex str9xpec lock
-lock str9 device. The str9 will only respond to an unlock command that will
-erase the device.
-@item @b{str9xpec unlock} <@var{num}>
-@cindex str9xpec unlock
-unlock str9 device.
-@item @b{str9xpec options_read} <@var{num}>
-@cindex str9xpec options_read
-read str9 option bytes.
-@item @b{str9xpec options_write} <@var{num}>
-@cindex str9xpec options_write
-write str9 option bytes.
-@end itemize
-
-@subsection STR9 configuration
-@cindex STR9 configuration
-@itemize @bullet
-@item @b{str9x flash_config} <@var{bank}> <@var{BBSR}> <@var{NBBSR}>
-<@var{BBADR}> <@var{NBBADR}>
-@cindex str9x flash_config
-Configure str9 flash controller.
-@smallexample
-eg. str9x flash_config 0 4 2 0 0x80000
-This will setup
-BBSR - Boot Bank Size register
-NBBSR - Non Boot Bank Size register
-BBADR - Boot Bank Start Address register
-NBBADR - Boot Bank Start Address register
-@end smallexample
-@end itemize
-
-@subsection STR9 option byte configuration
-@cindex STR9 option byte configuration
-@itemize @bullet
-@item @b{str9xpec options_cmap} <@var{num}> <@option{bank0}|@option{bank1}>
-@cindex str9xpec options_cmap
-configure str9 boot bank.
-@item @b{str9xpec options_lvdthd} <@var{num}> <@option{2.4v}|@option{2.7v}>
-@cindex str9xpec options_lvdthd
-configure str9 lvd threshold.
-@item @b{str9xpec options_lvdsel} <@var{num}> <@option{vdd}|@option{vdd_vddq}>
-@cindex str9xpec options_lvdsel
-configure str9 lvd source.
-@item @b{str9xpec options_lvdwarn} <@var{bank}> <@option{vdd}|@option{vdd_vddq}>
-@cindex str9xpec options_lvdwarn
-configure str9 lvd reset warning source.
-@end itemize
-
-@subsection STM32x specific commands
-@cindex STM32x specific commands
-
-These are flash specific commands when using the stm32x driver.
-@itemize @bullet
-@item @b{stm32x lock} <@var{num}>
-@cindex stm32x lock
-lock stm32 device.
-@item @b{stm32x unlock} <@var{num}>
-@cindex stm32x unlock
-unlock stm32 device.
-@item @b{stm32x options_read} <@var{num}>
-@cindex stm32x options_read
-read stm32 option bytes.
-@item @b{stm32x options_write} <@var{num}> <@option{SWWDG}|@option{HWWDG}>
-<@option{RSTSTNDBY}|@option{NORSTSTNDBY}> <@option{RSTSTOP}|@option{NORSTSTOP}>
-@cindex stm32x options_write
-write stm32 option bytes.
-@item @b{stm32x mass_erase} <@var{num}>
-@cindex stm32x mass_erase
-mass erase flash memory.
-@end itemize
-
-@page
-@section Architecture Specific Commands
-@cindex Architecture Specific Commands
-
-@subsection ARMV4/5 specific commands
-@cindex ARMV4/5 specific commands
-
-These commands are specific to ARM architecture v4 and v5, like all ARM7/9 systems
-or Intel XScale (XScale isn't supported yet).
-@itemize @bullet
-@item @b{armv4_5 reg}
-@cindex armv4_5 reg
-Display a list of all banked core registers, fetching the current value from every
-core mode if necessary. OpenOCD versions before rev. 60 didn't fetch the current
-register value.
-@item @b{armv4_5 core_mode} [@option{arm}|@option{thumb}]
-@cindex armv4_5 core_mode
-Displays the core_mode, optionally changing it to either ARM or Thumb mode.
-The target is resumed in the currently set @option{core_mode}.
-@end itemize
-
-@subsection ARM7/9 specific commands
-@cindex ARM7/9 specific commands
-
-These commands are specific to ARM7 and ARM9 targets, like ARM7TDMI, ARM720t,
-ARM920t or ARM926EJ-S.
-@itemize @bullet
-@item @b{arm7_9 sw_bkpts} <@option{enable}|@option{disable}>
-@cindex arm7_9 sw_bkpts
-Enable/disable use of software breakpoints. On ARMv4 systems, this reserves
-one of the watchpoint registers to implement software breakpoints. Disabling
-SW Bkpts frees that register again.
-@item @b{arm7_9 force_hw_bkpts} <@option{enable}|@option{disable}>
-@cindex arm7_9 force_hw_bkpts
-When @option{force_hw_bkpts} is enabled, the @option{sw_bkpts} support is disabled, and all
-breakpoints are turned into hardware breakpoints.
-@item @b{arm7_9 dbgrq} <@option{enable}|@option{disable}>
-@cindex arm7_9 dbgrq
-Enable use of the DBGRQ bit to force entry into debug mode. This should be
-safe for all but ARM7TDMI--S cores (like Philips LPC).
-@item @b{arm7_9 fast_writes} <@option{enable}|@option{disable}>
-@cindex arm7_9 fast_writes [DEPRECATED]
-See @option{arm7_9 fast_memory_access} instead.
-@item @b{arm7_9 fast_memory_access} <@option{enable}|@option{disable}>
-@cindex arm7_9 fast_memory_access
-Allow the OpenOCD to read and write memory without checking completion of
-the operation. This provides a huge speed increase, especially with USB JTAG
-cables (FT2232), but might be unsafe if used with targets running at a very low
-speed, like the 32kHz startup clock of an AT91RM9200.
-@item @b{arm7_9 dcc_downloads} <@option{enable}|@option{disable}>
-@cindex arm7_9 dcc_downloads
-Enable the use of the debug communications channel (DCC) to write larger (>128 byte)
-amounts of memory. DCC downloads offer a huge speed increase, but might be potentially
-unsafe, especially with targets running at a very low speed. This command was introduced
-with OpenOCD rev. 60.
-@end itemize
-
-@subsection ARM920T specific commands
-@cindex ARM920T specific commands
-
-@itemize @bullet
-@item @b{arm920t cache_info}
-@cindex arm920t cache_info
-Print information about the caches found. This allows you to see if your target
-is a ARM920T (2x16kByte cache) or ARM922T (2x8kByte cache).
-@item @b{arm920t md<bhw>_phys} <@var{addr}> [@var{count}]
-@cindex arm920t md<bhw>_phys
-Display memory at physical address addr.
-@item @b{arm920t mw<bhw>_phys} <@var{addr}> <@var{value}>
-@cindex arm920t mw<bhw>_phys
-Write memory at physical address addr.
-@item @b{arm920t read_cache} <@var{filename}>
-@cindex arm920t read_cache
-Dump the content of ICache and DCache to a file.
-@item @b{arm920t read_mmu} <@var{filename}>
-@cindex arm920t read_mmu
-Dump the content of the ITLB and DTLB to a file.
-@item @b{arm920t virt2phys} <@var{VA}>
-@cindex arm920t virt2phys
-Translate a virtual address to a physical address.
-@end itemize
-
-@page
-@section Debug commands
-@cindex Debug commands
-The following commands give direct access to the core, and are most likely
-only useful while debugging the OpenOCD.
-@itemize @bullet
-@item @b{arm7_9 write_xpsr} <@var{32-bit value}> <@option{0=cpsr}, @option{1=spsr}>
-@cindex arm7_9 write_xpsr
-Immediately write either the current program status register (CPSR) or the saved
-program status register (SPSR), without changing the register cache (as displayed
-by the @option{reg} and @option{armv4_5 reg} commands).
-@item @b{arm7_9 write_xpsr_im8} <@var{8-bit value}> <@var{rotate 4-bit}>
-<@var{0=cpsr},@var{1=spsr}>
-@cindex arm7_9 write_xpsr_im8
-Write the 8-bit value rotated right by 2*rotate bits, using an immediate write
-operation (similar to @option{write_xpsr}).
-@item @b{arm7_9 write_core_reg} <@var{num}> <@var{mode}> <@var{value}>
-@cindex arm7_9 write_core_reg
-Write a core register, without changing the register cache (as displayed by the
-@option{reg} and @option{armv4_5 reg} commands). The <@var{mode}> argument takes the
-encoding of the [M4:M0] bits of the PSR.
-@end itemize
-
-@page
-@section JTAG commands
-@cindex JTAG commands
-@itemize @bullet
-@item @b{scan_chain}
-@cindex scan_chain
-Print current scan chain configuration.
-@item @b{jtag_reset}
-@cindex jtag_reset
-Toggle reset lines <@var{trst}> <@var{srst}>.
-@item @b{endstate} <@var{tap_state}>
-@cindex endstate
-Finish JTAG operations in <@var{tap_state}>.
-@item @b{runtest} <@var{num_cycles}>
-@cindex runtest
-Move to Run-Test/Idle, and execute <@var{num_cycles}>
-@item @b{statemove} [@var{tap_state}]
-@cindex statemove
-Move to current endstate or [@var{tap_state}]
-@item @b{irscan}
-@cindex irscan
-Execute IR scan <@var{device}> <@var{instr}> [@var{dev2}] [@var{instr2}] ...
-@item @b{drscan}
-@cindex drscan
-Execute DR scan <@var{device}> [@var{dev2}] [@var{var2}] ...
-@item @b{verify_ircapture}
-@cindex verify_ircapture
-Verify value captured during Capture-IR <@option{enable}|@option{disable}>
-@item @b{var}
-@cindex var
-Allocate, display or delete variable <@var{name}> [@var{num_fields}|@var{del}] [@var{size1}] ...
-@item @b{field}
-@cindex field
-Display/modify variable field <@var{var}> <@var{field}> [@var{value}|@var{flip}]
-@end itemize
-
-@node Sample Scripts
-@chapter Sample Scripts
-@cindex scripts
-
-This page will collect some script examples for different CPUs.
-
-The configuration script can be divided in the following section:
-@itemize @bullet
-@item daemon configuration
-@item interface
-@item jtag scan chain
-@item target configuration
-@item flash configuration
-@end itemize
-
-Detailed information about each section can be found at OpenOCD configuration
-
-@section OMAP5912 Flash Debug
-@cindex OMAP5912 Flash Debug
-The following two scripts were used with a wiggler PP and and a TI OMAP5912
-dual core processor - (@uref{http://www.ti.com}), on a OMAP5912 OSK board
-- (@uref{http://www.spectrumdigital.com}).
-@subsection Openocd config
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface parport
-parport_port 0x378
-parport_cable wiggler
-jtag_speed 0
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 38 0x0 0x0 0x0
-jtag_device 4 0x1 0x0 0xe
-jtag_device 8 0x0 0x0 0x0
-
-#target configuration
-daemon_startup reset
-
-#target <type> <endianness> <reset mode> <chainpos> <variant>
-target arm926ejs little run_and_init 1 arm926ejs
-target_script 0 reset omap5912_osk.init
-run_and_halt_time 0 30
-
-# omap5912 lcd frame buffer as working area
-working_area 0 0x20000000 0x3e800 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank cfi 0x00000000 0x1000000 2 2 0
-@end smallexample
-
-@subsection Openocd init
-@smallexample
-#
-# halt target
-#
-poll
-sleep 1
-halt
-wait_halt
-#
-# disable wdt
-#
-mww 0xfffec808 0x000000f5
-mww 0xfffec808 0x000000a0
-
-mww 0xfffeb048 0x0000aaaa
-sleep 500
-mww 0xfffeb048 0x00005555
-sleep 500
-#
-# detect flash
-#
-flash probe 0
-
-@end smallexample
-
-@section STR71x Script
-@cindex STR71x Script
-The following script was used with an Amontec JTAGkey and a STR710 / STR711 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 0
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi
-run_and_halt_time 0 30
-
-working_area 0 0x2000C000 0x4000 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
-@end smallexample
-
-@section STR750 Script
-@cindex STR750 Script
-The following script was used with an Amontec JTAGkey and a STR750 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 19
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-#reset_config trst_and_srst srst_pulls_trst
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#jtag nTRST and nSRST delay
-jtag_nsrst_delay 500
-jtag_ntrst_delay 500
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi
-run_and_halt_time 0 30
-
-working_area 0 0x40000000 0x4000 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str7x 0x20000000 0x000040000 0 0 0 STR75x
-@end smallexample
-
-@section STR912 Script
-@cindex STR912 Script
-The following script was used with an Amontec JTAGkey and a STR912 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-jtag_speed 1
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 8 0x1 0x1 0xfe
-jtag_device 4 0x1 0xf 0xe
-jtag_device 5 0x1 0x1 0x1e
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm966e <endianness> <reset mode> <chainpos> <variant>
-target arm966e little reset_halt 1 arm966e
-run_and_halt_time 0 30
-
-working_area 0 0x50000000 16384 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-@end smallexample
-
-@section STR912 comstick
-@cindex STR912 comstick Script
-The following script was used with a Hitex STR9 Comstick:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "STR9-comStick A"
-ft2232_layout comstick
-jtag_speed 1
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 8 0x1 0x1 0xfe
-jtag_device 4 0x1 0xf 0xe
-jtag_device 5 0x1 0x1 0x1e
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm966e <endianness> <reset mode> <chainpos> <variant>
-target arm966e little reset_halt 1 arm966e
-run_and_halt_time 0 30
-
-working_area 0 0x50000000 16384 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-@end smallexample
-
-@section STM32x Script
-@cindex STM32x Script
-The following script was used with an Amontec JTAGkey and a STM32x cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-jtag_speed 10
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-jtag_device 5 0x1 0x1 0x1e
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target cortex_m3 <endianness> <reset mode> <chainpos> <variant>
-target cortex_m3 little run_and_halt 0
-run_and_halt_time 0 30
-
-working_area 0 0x20000000 16384 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank stm32x 0x08000000 0x00020000 0 0 0
-@end smallexample
-
-@section STM32x Performance Stick
-@cindex STM32x Performance Stick Script
-The following script was used with the Hitex STM32 Performance Stick
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "STM32-PerformanceStick A"
-ft2232_layout stm32stick
-jtag_speed 10
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-jtag_device 5 0x1 0x1 0x1e
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target cortex_m3 <endianness> <reset mode> <chainpos> <variant>
-target cortex_m3 little run_and_halt 0
-run_and_halt_time 0 30
-
-working_area 0 0x20000000 16384 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank stm32x 0x08000000 0x00020000 0 0 0
-@end smallexample
-
-@section LPC2129 Script
-@cindex LPC2129 Script
-The following script was used with an wiggler PP and a LPC-2129 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface parport
-parport_port 0x378
-parport_cable wiggler
-jtag_speed 0
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-
-working_area 0 0x40000000 0x4000 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
-@end smallexample
-
-@section LPC2148 Script
-@cindex LPC2148 Script
-The following script was used with an Amontec JTAGkey and a LPC2148 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 3
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-
-working_area 0 0x40000000 0x8000 nobackup
-
-#flash configuration
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v1 14765 calc_checksum
-@end smallexample
-
-@section LPC2294 Script
-@cindex LPC2294 Script
-The following script was used with an Amontec JTAGkey and a LPC2294 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 3
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-
-working_area 0 0x40000000 0x4000 nobackup
-
-#flash configuration
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
-@end smallexample
-
-@section AT91R40008 Script
-@cindex AT91R40008 Script
-The following script was used with an Amontec JTAGkey and a AT91R40008 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi
-run_and_halt_time 0 30
-@end smallexample
-
-@section AT91SAM7s Script
-@cindex AT91SAM7s Script
-The following script was used with an Olimex ARM-JTAG-OCD and a AT91SAM7S64 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Olimex OpenOCD JTAG A"
-ft2232_layout olimex-jtag
-ft2232_vid_pid 0x15BA 0x0003
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi
-run_and_halt_time 0 30
-
-# flash-options AT91
-working_area 0 0x00200000 0x4000 nobackup
-flash bank at91sam7 0 0 0 0 0
-
-# Information:
-# erase command (telnet-interface) for complete flash:
-# flash erase <num> 0 numlockbits-1 (can be seen from output of flash info 0)
-# SAM7S64 with 16 lockbits and bank 0: flash erase 0 0 15
-# set/clear NVM-Bits:
-# at91sam7 gpnvm <num> <bit> <set|clear>
-# disable locking from SAM-BA:
-# flash protect 0 0 1 off
-@end smallexample
-
-@section XSCALE IXP42x Script
-@cindex XSCALE IXP42x Script
-The following script was used with an Amontec JTAGkey-Tiny and a xscale ixp42x cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 7 0x1 0x7f 0x7e
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target xscale big run_and_halt 0 IXP42x
-run_and_halt_time 0 30
-@end smallexample
-
-@section Cirrus Logic EP9301 Script
-@cindex Cirrus Logic EP9301 Script
-The following script was used with FT2232 based JTAG interfaces and a
-Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-
-#Olimex ARM-USB-OCD
-#ft2232_device_desc "Olimex OpenOCD JTAG"
-#ft2232_layout olimex-jtag
-#ft2232_vid_pid 0x15ba 0x0003
-
-#Amontec JTAGkey (and JTAGkey-Tiny)
-#Serial is only necessary if more than one JTAGkey is connected
-ft2232_device_desc "Amontec JTAGkey A"
-#ft2232_serial AMTJKV31
-#ft2232_serial T1P3S2W8
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-
-#wiggler/parallel port interface
-#interface parport
-#parport_port 0x378
-#parport_cable wiggler
-#jtag_speed 0
-jtag_speed 1
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#target configuration
-daemon_startup attach
-
-#target <type> <endianess> <reset mode>
-target arm920t little reset_halt 0
-working_area 0 0x80014000 0x1000 backup
-
-#flash configuration
-#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x60000000 0x1000000 2 2 0
-@end smallexample
-
-@section Hilscher netX 100 / 500 Script
-@cindex Hilscher netX 100 / 500 Script
-The following script was used with an Amontec JTAGkey and a Hilscher
-netX 500 cpu:
-@smallexample
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 5
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#target configuration
-daemon_startup reset
-
-#target <type> <endianness> <startup mode> <chainpos> <variant>
-target arm926ejs little run_and_halt 0 arm926ejs
-run_and_halt_time 0 500
-@end smallexample
-
-@section Marvell/Intel PXA270 Script
-@cindex Marvell/Intel PXA270 Script
-@smallexample
-# config for Intel PXA270
-# not, as of 2007-06-22, openocd only works with the
-# libftd2xx library from ftdi. libftdi does not work.
-
-telnet_port 3333
-gdb_port 4444
-
-interface ft2232
-ft2232_layout olimex-jtag
-ft2232_vid_pid 0x15BA 0x0003
-ft2232_device_desc "Olimex OpenOCD JTAG"
-jtag_speed 0
-# set jtag_nsrst_delay to the delay introduced by your reset circuit
-# the rest of the needed delays are built into the openocd program
-jtag_nsrst_delay 260
-# set the jtag_ntrst_delay to the delay introduced by a reset circuit
-# the rest of the needed delays are built into the openocd program
-jtag_ntrst_delay 0
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst separate
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 7 0x1 0x7f 0x7e
-
-#target configuration
-daemon_startup reset
-
-target xscale little reset_halt 0 pxa27x
-
-# maps to PXA internal RAM. If you are using a PXA255
-# you must initialize SDRAM or leave this option off
-working_area 0 0x5c000000 0x10000 nobackup
-
-run_and_halt_time 0 30
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-# works for P30 flash
-flash bank cfi 0x00000000 0x1000000 2 4 0
-@end smallexample
-
-@node GDB and Openocd
-@chapter GDB and Openocd
-@cindex GDB and Openocd
-Openocd complies with the remote gdbserver protocol, and as such can be used
-to debug remote targets.
-
-@section Connecting to gdb
-@cindex Connecting to gdb
-A connection is typically started as follows:
-@smallexample
-target remote localhost:3333
-@end smallexample
-This would cause gdb to connect to the gdbserver on the local pc using port 3333.
-
-To see a list of available openocd commands type @option{monitor help} on the
-gdb commandline.
-
-Openocd supports the gdb @option{qSupported} packet, this enables information
-to be sent by the gdb server (openocd) to gdb. Typical information includes
-packet size and device memory map.
-
-Previous versions of openocd required the following gdb options to increase
-the packet size and speed up gdb communication.
-@smallexample
-set remote memory-write-packet-size 1024
-set remote memory-write-packet-size fixed
-set remote memory-read-packet-size 1024
-set remote memory-read-packet-size fixed
-@end smallexample
-This is now handled in the @option{qSupported} PacketSize.
-
-@section Programming using gdb
-@cindex Programming using gdb
-
-By default the target memory map is not sent to gdb, this can be enabled by
-the following openocd config option:
-@smallexample
-gdb_memory_map enable
-@end smallexample
-For this to function correctly a valid flash config must also be configured
-in openocd. For speed also configure a valid working area.
-
-Informing gdb of the memory map of the target will enable gdb to protect any
-flash area of the target and use hardware breakpoints by default. This means
-that the openocd option @option{arm7_9 force_hw_bkpts} is not required when
-using a memory map.
-
-To view the configured memory map in gdb, use the gdb command @option{info mem}
-All other unasigned addresses within gdb are treated as ram.
-
-If @option{gdb_flash_program enable} is also used, gdb will be able to
-program any flash memory using the vFlash interface.
-
-gdb will look at the target memory map when a load command is given, if any
-areas to be programmed lie within the target flash area the vFlash packets
-will be used.
-
-Incase the target needs configuring before gdb programming, a script can be executed.
-@smallexample
-target_script 0 gdb_program_config config.script
-@end smallexample
-
-To verify any flash programming the gdb command @option{compare-sections}
-can be used.
-
-@node FAQ
-@chapter FAQ
-@cindex faq
-@enumerate
-@item OpenOCD complains about a missing cygwin1.dll
-
-Make sure you have Cygwin installed, or at least a version of OpenOCD that
-claims to come with all the necessary dlls. When using Cygwin, try launching
-the OpenOCD from the Cygwin shell.
-
-@item I'm trying to set a breakpoint using GDB (or a frontend like Insight or
-Eclipse), but OpenOCD complains that "Info: arm7_9_common.c:213
-arm7_9_add_breakpoint(): sw breakpoint requested, but software breakpoints not enabled".
-
-GDB issues software breakpoints when a normal breakpoint is requested, or to implement
-source-line single-stepping. On ARMv4T systems, like ARM7TDMI, ARM720t or ARM920t,
-software breakpoints consume one of the two available hardware breakpoints,
-and are therefor disabled by default. If your code is running from RAM, you
-can enable software breakpoints with the @option{arm7_9 sw_bkpts enable} command. If
-your code resides in Flash, you can't use software breakpoints, but you can force
-OpenOCD to use hardware breakpoints instead: @option{arm7_9 force_hw_bkpts enable}.
-
-@item When erasing or writing LPC2000 on-chip flash, the operation fails sometimes
-and works sometimes fine.
-
-Make sure the core frequency specified in the @option{flash lpc2000} line matches the
-clock at the time you're programming the flash. If you've specified the crystal's
-frequency, make sure the PLL is disabled, if you've specified the full core speed
-(e.g. 60MHz), make sure the PLL is enabled.
-
-@item When debugging using an Amontec Chameleon in its JTAG Accelerator configuration,
-I keep getting "Error: amt_jtagaccel.c:184 amt_wait_scan_busy(): amt_jtagaccel timed
-out while waiting for end of scan, rtck was disabled".
-
-Make sure your PC's parallel port operates in EPP mode. You might have to try several
-settings in your PC Bios (ECP, EPP, and different versions of those).
-
-@item When debugging with the OpenOCD and GDB (plain GDB, Insight, or Eclipse),
-I get lots of "Error: arm7_9_common.c:1771 arm7_9_read_memory():
-memory read caused data abort".
-
-The errors are non-fatal, and are the result of GDB trying to trace stack frames
-beyond the last valid frame. It might be possible to prevent this by setting up
-a proper "initial" stack frame, if you happen to know what exactly has to
-be done, feel free to add this here.
-
-@item I get the following message in the OpenOCD console (or log file):
-"Warning: arm7_9_common.c:679 arm7_9_assert_reset(): srst resets test logic, too".
-
-This warning doesn't indicate any serious problem, as long as you don't want to
-debug your core right out of reset. Your .cfg file specified @option{jtag_reset
-trst_and_srst srst_pulls_trst} to tell the OpenOCD that either your board,
-your debugger or your target uC (e.g. LPC2000) can't assert the two reset signals
-independently. With this setup, it's not possible to halt the core right out of
-reset, everything else should work fine.
-
-@item When using OpenOCD in conjunction with Amontec JTAGkey and the Yagarto
-Toolchain (Eclipse, arm-elf-gcc, arm-elf-gdb), the debugging seems to be
-unstable. When single-stepping over large blocks of code, GDB and OpenOCD
-quit with an error message. Is there a stability issue with OpenOCD?
-
-No, this is not a stability issue concering OpenOCD. Most users have solved
-this issue by simply using a self-powered USB Hub, which they connect their
-Amontec JTAGkey to. Apparently, some computers do not provide a USB power
-supply stable enough for the Amontec JTAGkey to be operated.
-
-@item When using the Amontec JTAGkey, sometimes OpenOCD crashes with the
-following error messages: "Error: ft2232.c:201 ft2232_read(): FT_Read returned:
-4" and "Error: ft2232.c:365 ft2232_send_and_recv(): couldn't read from FT2232".
-What does that mean and what might be the reason for this?
-
-First of all, the reason might be the USB power supply. Try using a self-powered
-hub instead of a direct connection to your computer. Secondly, the error code 4
-corresponds to an FT_IO_ERROR, which means that the driver for the FTDI USB
-Chip ran into some sort of error - this points us to a USB problem.
-
-@item When using the Amontec JTAGkey, sometimes OpenOCD crashes with the following
-error message: "Error: gdb_server.c:101 gdb_get_char(): read: 10054".
-What does that mean and what might be the reason for this?
-
-Error code 10054 corresponds to WSAECONNRESET, which means that the debugger (GDB)
-has closed the connection to OpenOCD. This might be a GDB issue.
-
-@item In the configuration file in the section where flash device configurations
-are described, there is a parameter for specifying the clock frequency for
-LPC2000 internal flash devices (e.g.
-@option{flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14746 calc_checksum}),
-which must be sepcified in kilohertz. However, I do have a quartz crystal of a
-frequency that contains fractions of kilohertz (e.g. 14,745,600 Hz, i.e. 14,745.600 kHz).
-Is it possible to specify real numbers for the clock frequency?
-
-No. The clock frequency specified here must be given as an integral number.
-However, this clock frequency is used by the In-Application-Programming (IAP)
-routines of the LPC2000 family only, which seems to be very tolerant concerning
-the given clock frequency, so a slight difference between the specified clock
-frequency and the actual clock frequency will not cause any trouble.
-
-@item Do I have to keep a specific order for the commands in the configuration file?
-
-Well, yes and no. Commands can be given in arbitrary order, yet the devices
-listed for the JTAG scan chain must be given in the right order (jtag_device),
-with the device closest to the TDO-Pin being listed first. In general,
-whenever objects of the same type exist which require an index number, then
-these objects must be given in the right order (jtag_devices, targets and flash
-banks - a target references a jtag_device and a flash bank references a target).
-
-@item Sometimes my debugging session terminates with an error. When I look into the
-log file, I can see these error messages: Error: arm7_9_common.c:561
-arm7_9_execute_sys_speed(): timeout waiting for SYSCOMP
-
-@end enumerate
-
-@include fdl.texi
-
-@node Index
-@unnumbered Index
-
-@printindex cp
-
-@bye
+\input texinfo @c -*-texinfo-*-\r
+@c %**start of header\r
+@setfilename openocd.info\r
+@settitle Open On-Chip Debugger (openocd)\r
+@c %**end of header\r
+\r
+@include version.texi\r
+\r
+@titlepage\r
+@title Open On-Chip Debugger (openocd)\r
+@subtitle Edition @value{EDITION} for openocd version @value{VERSION}\r
+@subtitle @value{UPDATED}\r
+@page\r
+@vskip 0pt plus 1filll\r
+@end titlepage\r
+\r
+@contents\r
+\r
+@node Top, About, , (dir)\r
+@top OpenOCD\r
+\r
+This is edition @value{EDITION} of the openocd manual for version\r
+@value{VERSION}, @value{UPDATED}\r
+\r
+@menu\r
+* About:: About Openocd.\r
+* Developers:: \r
+* Building:: Building Openocd\r
+* Running:: Running Openocd\r
+* Configuration:: Openocd Configuration.\r
+* Commands:: Openocd Commands\r
+* Sample Scripts:: Sample Target Scripts\r
+* GDB and Openocd:: Using GDB and Openocd\r
+* FAQ:: Frequently Asked Questions\r
+* License:: GNU Free Documentation License\r
+* Index:: Main index.\r
+@end menu\r
+\r
+@node About\r
+@unnumbered About\r
+@cindex about\r
+\r
+The Open On-Chip Debugger (openocd) aims to provide debugging, in-system programming\r
+and boundary-scan testing for embedded target devices. The targets are interfaced\r
+using JTAG (IEEE 1149.1) compliant hardware, but this may be extended to other\r
+connection types in the future.\r
+\r
+Openocd currently supports Wiggler (clones), FTDI FT2232 based JTAG interfaces, the\r
+Amontec JTAG Accelerator, and the Gateworks GW1602. It allows ARM7 (ARM7TDMI and ARM720t),\r
+ARM9 (ARM920t, ARM922t, ARM926ej--s, ARM966e--s), XScale (PXA25x, IXP42x) and\r
+Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged.\r
+\r
+Flash writing is supported for external CFI compatible flashes (Intel and AMD/Spansion\r
+command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3\r
+and STM32x). Preliminary support for using the LPC3180's NAND flash controller is included.\r
+\r
+@node Developers\r
+@chapter Developers\r
+@cindex developers\r
+\r
+Openocd has been created by Dominic Rath as part of a diploma thesis written at the\r
+University of Applied Sciences Augsburg (@uref{http://www.fh-augsburg.de}).\r
+Others interested in improving the state of free and open debug and testing technology\r
+are welcome to participate.\r
+\r
+Other developers have contributed support for additional targets and flashes as well\r
+as numerous bugfixes and enhancements. See the AUTHORS file for regular contributors. \r
+\r
+@node Building\r
+@chapter Building\r
+@cindex building openocd\r
+\r
+You can download the current SVN version with SVN client of your choice from the\r
+following repositories:\r
+\r
+ (@uref{svn://svn.berlios.de/openocd/trunk})\r
+\r
+or\r
+\r
+ (@uref{http://svn.berlios.de/svnroot/repos/openocd/trunk})\r
+\r
+Using the SVN command line client, you could use the following command to fetch the\r
+latest version (make sure there is no (non-svn) directory called "openocd" in the\r
+current directory):\r
+\r
+@smallexample\r
+ svn checkout svn://svn.berlios.de/openocd/trunk\r
+@end smallexample\r
+\r
+Building the OpenOCD requires a recent version of the GNU autotools.\r
+On my build system, I'm using autoconf 2.13 and automake 1.9. For building on Windows,\r
+you have to use Cygwin. Make sure that your @env{PATH} environment variable contains no\r
+other locations with Unix utils (like UnxUtils) - these can't handle the Cygwin\r
+paths, resulting in obscure dependency errors (This is an observation I've gathered\r
+from the logs of one user - correct me if I'm wrong).\r
+\r
+You further need the appropriate driver files, if you want to build support for\r
+a FTDI FT2232 based interface:\r
+@itemize @bullet\r
+@item @b{ftdi2232} libftdi (@uref{http://www.intra2net.com/opensource/ftdi/})\r
+@item @b{ftd2xx} libftd2xx (@uref{http://www.ftdichip.com/Drivers/D2XX.htm})\r
+@item When using the Amontec JTAGkey, you have to get the drivers from the Amontec\r
+homepage (@uref{www.amontec.com}), as the JTAGkey uses a non-standard VID/PID. \r
+@end itemize\r
+\r
+Please note that the ftdi2232 variant (using libftdi) isn't supported under Cygwin.\r
+You have to use the ftd2xx variant (using FTDI's D2XX) on Cygwin.\r
+\r
+In general, the D2XX driver provides superior performance (several times as fast),\r
+but has the draw-back of being binary-only - though that isn't as worse, as it isn't\r
+a kernel module, only a user space library.\r
+\r
+To build OpenOCD (on both Linux and Cygwin), use the following commands:\r
+@smallexample\r
+ ./bootstrap \r
+@end smallexample\r
+Bootstrap generates the configure script, and prepares building on your system.\r
+@smallexample\r
+ ./configure \r
+@end smallexample\r
+Configure generates the Makefiles used to build OpenOCD\r
+@smallexample\r
+ make \r
+@end smallexample\r
+Make builds the OpenOCD, and places the final executable in ./src/\r
+\r
+The configure script takes several options, specifying which JTAG interfaces\r
+should be included:\r
+\r
+@itemize @bullet\r
+@item\r
+--enable-parport\r
+@item\r
+--enable-parport_ppdev\r
+@item\r
+--enable-amtjtagaccel\r
+@item\r
+--enable-ft2232_ftd2xx\r
+@footnote{Using the latest D2XX drivers from FTDI and following their installation\r
+instructions, I had to use @option{--enable-ft2232_libftd2xx} for the OpenOCD to\r
+build properly}\r
+@item\r
+--enable-ft2232_libftdi\r
+@item\r
+--with-ftd2xx=/path/to/d2xx/\r
+@end itemize\r
+\r
+If you want to access the parallel port using the PPDEV interface you have to specify\r
+both the @option{--enable-parport} AND the @option{--enable-parport_ppdev} option since\r
+the @option{--enable-parport_ppdev} option actually is an option to the parport driver\r
+(see @uref{http://forum.sparkfun.com/viewtopic.php?t=3795} for more info).\r
+\r
+Cygwin users have to specify the location of the FTDI D2XX package. This should be an\r
+absolute path containing no spaces.\r
+\r
+Linux users should copy the various parts of the D2XX package to the appropriate\r
+locations, i.e. /usr/include, /usr/lib. \r
+\r
+@node Running\r
+@chapter Running\r
+@cindex running openocd\r
+@cindex --configfile\r
+@cindex --debug_level\r
+@cindex --logfile\r
+@cindex --search\r
+The OpenOCD runs as a daemon, waiting for connections from clients (Telnet or GDB).\r
+Run with @option{--help} or @option{-h} to view the available command line arguments.\r
+\r
+It reads its configuration by default from the file openocd.cfg located in the current\r
+working directory. This may be overwritten with the @option{-f <configfile>} command line\r
+switch.\r
+\r
+To enable debug output (when reporting problems or working on OpenOCD itself), use\r
+the @option{-d} command line switch. This sets the debug_level to "3", outputting\r
+the most information, including debug messages. The default setting is "2", outputting\r
+only informational messages, warnings and errors. You can also change this setting\r
+from within a telnet or gdb session (@option{debug_level <n>}).\r
+\r
+You can redirect all output from the daemon to a file using the @option{-l <logfile>} switch.\r
+\r
+Search paths for config/script files can be added to openocd by using\r
+the @option{-s <search>} switch.\r
+\r
+@node Configuration\r
+@chapter Configuration\r
+@cindex configuration\r
+The Open On-Chip Debugger (OpenOCD) runs as a daemon, and reads it current configuration\r
+by default from the file openocd.cfg in the current directory. A different configuration\r
+file can be specified with the @option{-f <conf.file>} given at the openocd command line.\r
+\r
+The configuration file is used to specify on which ports the daemon listens for new\r
+connections, the JTAG interface used to connect to the target, the layout of the JTAG\r
+chain, the targets that should be debugged, and connected flashes.\r
+\r
+@section Daemon configuration\r
+\r
+@itemize @bullet\r
+@item @b{telnet_port} <@var{number}>\r
+@cindex telnet_port\r
+Port on which to listen for incoming telnet connections \r
+@item @b{gdb_port} <@var{number}>\r
+@cindex gdb_port\r
+First port on which to listen for incoming GDB connections. The GDB port for the\r
+first target will be gdb_port, the second target will listen on gdb_port + 1, and so on. \r
+@item @b{gdb_detach} <@var{resume|reset|halt|nothing}>\r
+@cindex gdb_detach\r
+Configures what openocd will do when gdb detaches from the daeman.\r
+Default behaviour is <@var{resume}>\r
+@item @b{gdb_memory_map} <@var{enable|disable}>\r
+@cindex gdb_memory_map\r
+Set to <@var{enable}> so that openocd will send the memory configuration to gdb when\r
+requested. gdb will then know when to set hardware breakpoints, and program flash\r
+using the gdb load command. @option{gdb_flash_program enable} will also need enabling\r
+for flash programming to work.\r
+Default behaviour is <@var{disable}>\r
+@item @b{gdb_flash_program} <@var{enable|disable}>\r
+@cindex gdb_flash_program\r
+Set to <@var{enable}> so that openocd will program the flash memory when a\r
+vFlash packet is received.\r
+Default behaviour is <@var{disable}>\r
+@item @b{daemon_startup} <@var{mode}> either @samp{attach} or @samp{reset}\r
+@cindex daemon_startup\r
+Tells the OpenOCD whether it should reset the target when the daemon is launched, or\r
+if it should just attach to the target. \r
+@end itemize\r
+\r
+@section JTAG interface configuration\r
+\r
+@itemize @bullet\r
+@item @b{interface} <@var{name}>\r
+@cindex interface\r
+Use the interface driver <@var{name}> to connect to the target. Currently supported\r
+interfaces are\r
+@itemize @minus\r
+@item parport\r
+PC parallel port bit-banging (Wigglers, PLD download cable, ...)\r
+@end itemize\r
+@itemize @minus\r
+@item amt_jtagaccel\r
+Amontec Chameleon in its JTAG Accelerator configuration connected to a PC's EPP\r
+mode parallel port\r
+@end itemize\r
+@itemize @minus\r
+@item ft2232\r
+FTDI FT2232 based devices using either the open-source libftdi or the binary only\r
+FTD2XX driver. The FTD2XX is superior in performance, but not available on every\r
+platform. The libftdi uses libusb, and should be portable to all systems that provide\r
+libusb.\r
+@end itemize\r
+@itemize @minus\r
+@item ep93xx\r
+Cirrus Logic EP93xx based single-board computer bit-banging (in development)\r
+@end itemize\r
+@end itemize\r
+\r
+@itemize @bullet\r
+@item @b{jtag_speed} <@var{number}>\r
+@cindex jtag_speed\r
+Limit the maximum speed of the JTAG interface. Usually, a value of zero means maximum\r
+speed. The actual effect of this option depends on the JTAG interface used.\r
+\r
+@itemize @minus\r
+@item wiggler: maximum speed / @var{number}\r
+@item ft2232: 6MHz / (@var{number}+1)\r
+@item amt jtagaccel: 8 / 2**@var{number}\r
+@end itemize\r
+\r
+Note: Make sure the jtag clock is no more than @math{1/6th × CPU-Clock}. This is\r
+especially true for synthesized cores (-S).\r
+\r
+@item @b{reset_config} <@var{signals}> [@var{combination}] [@var{trst_type}] [@var{srst_type}]\r
+@cindex reset_config\r
+The configuration of the reset signals available on the JTAG interface AND the target.\r
+If the JTAG interface provides SRST, but the target doesn't connect that signal properly,\r
+then OpenOCD can't use it. <@var{signals}> can be @samp{none}, @samp{trst_only},\r
+@samp{srst_only} or @samp{trst_and_srst}.\r
+[@var{combination}] is an optional value specifying broken reset signal implementations.\r
+@samp{srst_pulls_trst} states that the testlogic is reset together with the reset of\r
+the system (e.g. Philips LPC2000, "broken" board layout), @samp{trst_pulls_srst} says\r
+that the system is reset together with the test logic (only hypothetical, I haven't\r
+seen hardware with such a bug, and can be worked around).\r
+\r
+The [@var{trst_type}] and [@var{srst_type}] parameters allow the driver type of the\r
+reset lines to be specified. Possible values are @samp{trst_push_pull} (default)\r
+and @samp{trst_open_drain} for the test reset signal, and @samp{srst_open_drain}\r
+(default) and @samp{srst_push_pull} for the system reset. These values only affect\r
+JTAG interfaces with support for different drivers, like the Amontec JTAGkey and JTAGAccelerator. \r
+\r
+@item @b{jtag_device} <@var{IR length}> <@var{IR capture}> <@var{IR mask}> <@var{IDCODE instruction}>\r
+@cindex jtag_device\r
+Describes the devices that form the JTAG daisy chain, with the first device being\r
+the one closest to TDO. The parameters are the length of the instruction register\r
+(4 for all ARM7/9s), the value captured during Capture-IR (0x1 for ARM7/9), and a mask\r
+of bits that should be validated when doing IR scans (all four bits (0xf) for ARM7/9).\r
+The IDCODE instruction will in future be used to query devices for their JTAG\r
+identification code. This line is the same for all ARM7 and ARM9 devices.\r
+Other devices, like CPLDs, require different parameters. An example configuration\r
+line for a Xilinx XC9500 CPLD would look like this:\r
+@smallexample\r
+jtag_device 8 0x01 0x0e3 0xfe\r
+@end smallexample\r
+The instruction register (IR) is 8 bits long, during Capture-IR 0x01 is loaded into\r
+the IR, but only bits 0-1 and 5-7 should be checked, the others (2-4) might vary.\r
+The IDCODE instruction is 0xfe.\r
+\r
+@item @b{jtag_nsrst_delay} <@var{ms}>\r
+@cindex jtag_nsrst_delay\r
+How long (in miliseconds) the OpenOCD should wait after deasserting nSRST before\r
+starting new JTAG operations. \r
+@item @b{jtag_ntrst_delay} <@var{ms}>\r
+@cindex jtag_ntrst_delay\r
+How long (in miliseconds) the OpenOCD should wait after deasserting nTRST before\r
+starting new JTAG operations. \r
+\r
+The jtag_n[st]rst_delay options are useful if reset circuitry (like a reset supervisor,\r
+or on-chip features) keep a reset line asserted for some time after the external reset\r
+got deasserted.\r
+@end itemize\r
+\r
+@section parport options\r
+\r
+@itemize @bullet\r
+@item @b{parport_port} <@var{number}>\r
+@cindex parport_port\r
+Either the address of the I/O port (default: 0x378 for LPT1) or the number of\r
+the @file{/dev/parport} device\r
+\r
+When using PPDEV to access the parallel port, use the number of the parallel port:\r
+@option{parport_port 0} (the default). If @option{parport_port 0x378} is specified\r
+you may encounter a problem.\r
+@item @b{parport_cable} <@var{name}>\r
+@cindex parport_cable\r
+The layout of the parallel port cable used to connect to the target.\r
+Currently supported cables are \r
+@itemize @minus\r
+@item wiggler\r
+@cindex wiggler\r
+Original Wiggler layout, also supported by several clones, such\r
+as the Olimex ARM-JTAG\r
+@item old_amt_wiggler\r
+@cindex old_amt_wiggler\r
+The Wiggler configuration that comes with Amontec's Chameleon Programmer. The new\r
+version available from the website uses the original Wiggler layout ('@var{wiggler}')\r
+@item chameleon\r
+@cindex chameleon\r
+Describes the connection of the Amontec Chameleon's CPLD when operated in\r
+configuration mode. This is only used to program the Chameleon itself, not\r
+a connected target.\r
+@item dlc5\r
+@cindex dlc5\r
+Xilinx Parallel cable III.\r
+@item triton\r
+@cindex triton\r
+The parallel port adapter found on the 'Karo Triton 1 Development Board'.\r
+This is also the layout used by the HollyGates design\r
+(see @uref{http://www.lartmaker.nl/projects/jtag/}).\r
+@item flashlink\r
+@cindex flashlink\r
+ST Parallel cable. \r
+@end itemize\r
+@item @b{parport_write_on_exit} <@var{on|off}>\r
+@cindex parport_write_on_exit\r
+This will configure the parallel driver to write a known value to the parallel\r
+interface on exiting openocd\r
+@end itemize\r
+\r
+@section amt_jtagaccel options\r
+@itemize @bullet\r
+@item @b{parport_port} <@var{number}>\r
+@cindex parport_port\r
+Either the address of the I/O port (default: 0x378 for LPT1) or the number of the\r
+@file{/dev/parport} device \r
+@end itemize\r
+@section ft2232 options\r
+\r
+@itemize @bullet\r
+@item @b{ft2232_device_desc} <@var{description}>\r
+@cindex ft2232_device_desc\r
+The USB device description of the FTDI FT2232 device. If not specified, the FTDI\r
+default value is used. This setting is only valid if compiled with FTD2XX support.\r
+@item @b{ft2232_layout} <@var{name}>\r
+@cindex ft2232_layout\r
+The layout of the FT2232 GPIO signals used to control output-enables and reset\r
+signals. Valid layouts are\r
+@itemize @minus\r
+@item usbjtag\r
+The "USBJTAG-1" layout described in the original OpenOCD diploma thesis\r
+@item jtagkey\r
+Amontec JTAGkey and JTAGkey-tiny\r
+@item signalyzer\r
+Signalyzer\r
+@item olimex-jtag\r
+Olimex ARM-USB-OCD\r
+@item m5960\r
+American Microsystems M5960\r
+@item evb_lm3s811\r
+Luminary Micro EVB_LM3S811 as a JTAG interface (not onboard processor), no TRST or\r
+SRST signals on external connector\r
+@item comstick\r
+Hitex STR9 comstick \r
+@item stm32stick\r
+Hitex STM32 Performance Stick\r
+@item flyswatter\r
+Tin Can Tools Flyswatter\r
+@item turtelizer2\r
+egnite Software turtelizer2\r
+@item oocdlink\r
+OOCDLink\r
+@end itemize\r
+\r
+@item @b{ft2232_vid_pid} <@var{vid}> <@var{pid}>\r
+The vendor ID and product ID of the FTDI FT2232 device. If not specified, the FTDI\r
+default values are used. This command is not available on Windows. \r
+@item @b{ft2232_latency} <@var{ms}>\r
+On some systems using ft2232 based JTAG interfaces the FT_Read function call in\r
+ft2232_read() fails to return the expected number of bytes. This can be caused by\r
+USB communication delays and has proved hard to reproduce and debug. Setting the\r
+FT2232 latency timer to a larger value increases delays for short USB packages but it\r
+also reduces the risk of timeouts before receiving the expected number of bytes.\r
+The OpenOCD default value is 2 and for some systems a value of 10 has proved useful. \r
+@end itemize\r
+\r
+@section ep93xx options\r
+@cindex ep93xx options\r
+Currently, there are no options available for the ep93xx interface.\r
+\r
+@page\r
+@section Target configuration\r
+\r
+@itemize @bullet\r
+@item @b{target} <@var{type}> <@var{endianess}> <@var{reset_mode}> <@var{JTAG pos}>\r
+<@var{variant}>\r
+@cindex target\r
+Defines a target that should be debugged. Currently supported types are:\r
+@itemize @minus\r
+@item arm7tdmi\r
+@item arm720t\r
+@item arm9tdmi\r
+@item arm920t\r
+@item arm922t\r
+@item arm926ejs\r
+@item arm966e\r
+@item cortex_m3\r
+@item feroceon \r
+@item xscale \r
+@end itemize\r
+\r
+If you want to use a target board that is not on this list, see Adding a new\r
+target board\r
+\r
+Endianess may be @option{little} or @option{big}.\r
+\r
+The reset_mode specifies what should happen to the target when a reset occurs:\r
+@itemize @minus\r
+@item reset_halt\r
+@cindex reset_halt\r
+Immediately request a target halt after reset. This allows targets to be debugged\r
+from the very first instruction. This is only possible with targets and JTAG\r
+interfaces that correctly implement the reset signals.\r
+@item reset_init\r
+@cindex reset_init\r
+Similar to @option{reset_halt}, but executes the script file defined to handle the\r
+'reset' event for the target. Like @option{reset_halt} this only works with\r
+correct reset implementations.\r
+@item reset_run\r
+@cindex reset_run\r
+Simply let the target run after a reset.\r
+@item run_and_halt\r
+@cindex run_and_halt\r
+Let the target run for some time (default: 1s), and then request halt.\r
+@item run_and_init\r
+@cindex run_and_init\r
+A combination of @option{reset_init} and @option{run_and_halt}. The target is allowed\r
+to run for some time, then halted, and the @option{reset} event script is executed. \r
+@end itemize\r
+\r
+On JTAG interfaces / targets where system reset and test-logic reset can't be driven\r
+completely independent (like the LPC2000 series), or where the JTAG interface is\r
+unavailable for some time during startup (like the STR7 series), you can't use\r
+@option{reset_halt} or @option{reset_init}.\r
+\r
+@item @b{target_script} <@var{target#}> <@var{event}> <@var{script_file}>\r
+@cindex target_script\r
+Event is either @option{reset}, @option{post_halt}, @option{pre_resume} or @option{gdb_program_config}\r
+\r
+TODO: describe exact semantic of events\r
+@item @b{run_and_halt_time} <@var{target#}> <@var{time_in_ms}>\r
+@cindex run_and_halt_time\r
+The amount of time the debugger should wait after releasing reset before it asserts\r
+a debug request. This is used by the @option{run_and_halt} and @option{run_and_init}\r
+reset modes. \r
+@item @b{working_area} <@var{target#}> <@var{address}> <@var{size}>\r
+<@var{backup}|@var{nobackup}>\r
+@cindex working_area\r
+Specifies a working area for the debugger to use. This may be used to speed-up\r
+downloads to target memory and flash operations, or to perform otherwise unavailable\r
+operations (some coprocessor operations on ARM7/9 systems, for example). The last\r
+parameter decides whether the memory should be preserved <@var{backup}>. If possible, use\r
+a working_area that doesn't need to be backed up, as that slows down operation. \r
+@end itemize\r
+\r
+@subsection arm7tdmi options\r
+@cindex arm7tdmi options\r
+target arm7tdmi <@var{endianess}> <@var{reset_mode}> <@var{jtag#}>\r
+The arm7tdmi target definition requires at least one additional argument, specifying\r
+the position of the target in the JTAG daisy-chain. The first JTAG device is number 0.\r
+The optional [@var{variant}] parameter has been removed in recent versions.\r
+The correct feature set is determined at runtime. \r
+\r
+@subsection arm720t options\r
+@cindex arm720t options\r
+ARM720t options are similar to ARM7TDMI options.\r
+\r
+@subsection arm9tdmi options\r
+@cindex arm9tdmi options\r
+ARM9TDMI options are similar to ARM7TDMI options. Supported variants are\r
+@option{arm920t}, @option{arm922t} and @option{arm940t}.\r
+This enables the hardware single-stepping support found on these cores.\r
+\r
+@subsection arm920t options\r
+@cindex arm920t options\r
+ARM920t options are similar to ARM9TDMI options.\r
+\r
+@subsection arm966e options\r
+@cindex arm966e options\r
+ARM966e options are similar to ARM9TDMI options.\r
+\r
+@subsection xscale options\r
+@cindex xscale options\r
+Supported variants are @option{ixp42x}, @option{ixp45x}, @option{ixp46x},\r
+@option{pxa250}, @option{pxa255}, @option{pxa26x}.\r
+\r
+@section Flash configuration\r
+@cindex Flash configuration\r
+\r
+@itemize @bullet\r
+@item @b{flash bank} <@var{driver}> <@var{base}> <@var{size}> <@var{chip_width}>\r
+<@var{bus_width}> <@var{target#}> [@var{driver_options ...}]\r
+@cindex flash bank\r
+Configures a flash bank at <@var{base}> of <@var{size}> bytes and <@var{chip_width}>\r
+and <@var{bus_width}> bytes using the selected flash <driver>.\r
+\r
+@item @b{flash auto_erase} <@option{on}|@option{off}>\r
+@cindex flash auto_erase\r
+auto erase flash banks prior to writing. Currently only works when using\r
+@option{flash write_image} command. Default is @option{off}.\r
+@end itemize\r
+\r
+@subsection lpc2000 options\r
+@cindex lpc2000 options\r
+\r
+@b{flash bank lpc2000} <@var{base}> <@var{size}> 0 0 <@var{target#}> <@var{variant}>\r
+<@var{clock}> [@var{calc_checksum}]\r
+LPC flashes don't require the chip and bus width to be specified. Additional\r
+parameters are the <@var{variant}>, which may be @var{lpc2000_v1} (older LPC21xx and LPC22xx)\r
+or @var{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx), the number\r
+of the target this flash belongs to (first is 0), the frequency at which the core\r
+is currently running (in kHz - must be an integral number), and the optional keyword\r
+@var{calc_checksum}, telling the driver to calculate a valid checksum for the exception\r
+vector table. \r
+\r
+@subsection cfi options\r
+@cindex cfi options\r
+\r
+@b{flash bank cfi} <@var{base}> <@var{size}> <@var{chip_width}> <@var{bus_width}>\r
+<@var{target#}>\r
+CFI flashes require the number of the target they're connected to as an additional\r
+argument. The CFI driver makes use of a working area (specified for the target)\r
+to significantly speed up operation. \r
+\r
+@var{chip_width} and @var{bus_width} are specified in bytes.\r
+\r
+@subsection at91sam7 options\r
+@cindex at91sam7 options\r
+\r
+@b{flash bank at91sam7} 0 0 0 0 <@var{target#}>\r
+AT91SAM7 flashes only require the @var{target#}, all other values are looked up after\r
+reading the chip-id and type. \r
+\r
+@subsection str7 options\r
+@cindex str7 options\r
+\r
+@b{flash bank str7x} <@var{base}> <@var{size}> 0 0 <@var{target#}> <@var{variant}>\r
+variant can be either STR71x, STR73x or STR75x. \r
+\r
+@subsection str9 options\r
+@cindex str9 options\r
+\r
+@b{flash bank str9x} <@var{base}> <@var{size}> 0 0 <@var{target#}>\r
+The str9 needs the flash controller to be configured prior to Flash programming, eg.\r
+@smallexample\r
+str9x flash_config 0 4 2 0 0x80000\r
+@end smallexample\r
+This will setup the BBSR, NBBSR, BBADR and NBBADR registers respectively. \r
+\r
+@subsection str9 options (str9xpec driver)\r
+\r
+@b{flash bank str9xpec} <@var{base}> <@var{size}> 0 0 <@var{target#}>\r
+Before using the flash commands the turbo mode will need enabling using str9xpec\r
+@option{enable_turbo} <@var{num>.}\r
+\r
+Only use this driver for locking/unlocking the device or configuring the option bytes.\r
+Use the standard str9 driver for programming.\r
+\r
+@subsection stellaris (LM3Sxxx) options\r
+@cindex stellaris (LM3Sxxx) options\r
+\r
+@b{flash bank stellaris} <@var{base}> <@var{size}> 0 0 <@var{target#}>\r
+stellaris flash plugin only require the @var{target#}. \r
+\r
+@subsection stm32x options\r
+@cindex stm32x options\r
+\r
+@b{flash bank stm32x} <@var{base}> <@var{size}> 0 0 <@var{target#}>\r
+stm32x flash plugin only require the @var{target#}. \r
+\r
+@node Commands\r
+@chapter Commands\r
+@cindex commands\r
+\r
+The Open On-Chip Debugger (OpenOCD) allows user interaction through a telnet interface\r
+(default: port 4444) and a GDB server (default: port 3333). The command line interpreter\r
+is available from both the telnet interface and a GDB session. To issue commands to the\r
+interpreter from within a GDB session, use the @option{monitor} command, e.g. use\r
+@option{monitor poll} to issue the @option{poll} command. All output is relayed through the\r
+GDB session.\r
+\r
+@section Daemon\r
+\r
+@itemize @bullet\r
+@item @b{sleep} <@var{msec}>\r
+@cindex sleep\r
+Wait for n milliseconds before resuming. Useful in connection with script files\r
+(@var{script} command and @var{target_script} configuration). \r
+\r
+@item @b{shutdown}\r
+@cindex shutdown\r
+Close the OpenOCD daemon, disconnecting all clients (GDB, Telnet). \r
+\r
+@item @b{debug_level} [@var{n}]\r
+@cindex debug_level\r
+Display or adjust debug level to n<0-3> \r
+\r
+@item @b{log_output} <@var{file}>\r
+@cindex log_output\r
+Redirect logging to <file> (default: stderr) \r
+\r
+@item @b{script} <@var{file}>\r
+@cindex script\r
+Execute commands from <file> \r
+\r
+@end itemize\r
+\r
+@subsection Target state handling\r
+@itemize @bullet\r
+@item @b{poll} [@option{on}|@option{off}]\r
+@cindex poll\r
+Poll the target for its current state. If the target is in debug mode, architecture\r
+specific information about the current state are printed. An optional parameter\r
+allows continuous polling to be enabled and disabled.\r
+\r
+@item @b{halt} [@option{ms}]\r
+@cindex halt\r
+Send a halt request to the target and waits for it to halt for [@option{ms}].\r
+Default [@option{ms}] is 5 seconds if no arg given.\r
+Optional arg @option{ms} is a timeout in milliseconds. Using 0 as the [@option{ms}]\r
+will stop openocd from waiting.\r
+\r
+@item @b{wait_halt} [@option{ms}]\r
+@cindex wait_halt\r
+Wait for the target to enter debug mode. Optional [@option{ms}] is\r
+a timeout in milliseconds. Default [@option{ms}] is 5 seconds if no\r
+arg given.\r
+\r
+@item @b{resume} [@var{address}]\r
+@cindex resume\r
+Resume the target at its current code position, or at an optional address.\r
+Openocd will wait 5 seconds for the target to resume.\r
+\r
+@item @b{step} [@var{address}]\r
+@cindex step\r
+Single-step the target at its current code position, or at an optional address. \r
+\r
+@item @b{reset} [@option{run}|@option{halt}|@option{init}|@option{run_and_halt}\r
+|@option{run_and_init}]\r
+@cindex reset\r
+Do a hard-reset. The optional parameter specifies what should happen after the reset.\r
+This optional parameter overwrites the setting specified in the configuration file,\r
+making the new behaviour the default for the @option{reset} command.\r
+@itemize @minus\r
+@item run\r
+@cindex reset run\r
+Let the target run.\r
+@item halt\r
+@cindex reset halt\r
+Immediately halt the target (works only with certain configurations).\r
+@item init\r
+@cindex reset init\r
+Immediately halt the target, and execute the reset script (works only with certain\r
+configurations)\r
+@item run_and_halt\r
+@cindex reset run_and_halt\r
+Let the target run for a certain amount of time, then request a halt.\r
+@item run_and_init\r
+@cindex reset run_and_init\r
+Let the target run for a certain amount of time, then request a halt. Execute the\r
+reset script once the target entered debug mode.\r
+@end itemize\r
+@end itemize\r
+\r
+@subsection Memory access commands\r
+These commands allow accesses of a specific size to the memory system:\r
+@itemize @bullet\r
+@item @b{mdw} <@var{addr}> [@var{count}]\r
+@cindex mdw\r
+display memory words \r
+@item @b{mdh} <@var{addr}> [@var{count}]\r
+@cindex mdh\r
+display memory half-words \r
+@item @b{mdb} <@var{addr}> [@var{count}]\r
+@cindex mdb\r
+display memory bytes \r
+@item @b{mww} <@var{addr}> <@var{value}>\r
+@cindex mww\r
+write memory word \r
+@item @b{mwh} <@var{addr}> <@var{value}>\r
+@cindex mwh\r
+write memory half-word \r
+@item @b{mwb} <@var{addr}> <@var{value}>\r
+@cindex mwb\r
+write memory byte \r
+\r
+@item @b{load_image} <@var{file}> <@var{address}> [@option{bin}|@option{ihex}|@option{elf}]\r
+@cindex load_image\r
+Load image <@var{file}> to target memory at <@var{address}> \r
+@item @b{dump_image} <@var{file}> <@var{address}> <@var{size}>\r
+@cindex dump_image\r
+Dump <@var{size}> bytes of target memory starting at <@var{address}> to a\r
+(binary) <@var{file}>.\r
+@item @b{verify_image} <@var{file}> <@var{address}> [@option{bin}|@option{ihex}|@option{elf}]\r
+@cindex verify_image\r
+Verify <@var{file}> to target memory starting at <@var{address}>.\r
+This will first attempt using a crc checksum, if this fails it will try a binary compare.\r
+@item @b{load_binary} <@var{file}> <@var{address}> [DEPRECATED]\r
+@cindex load_binary\r
+Load binary <@var{file}> to target memory at <@var{address}> \r
+@item @b{dump_binary} <@var{file}> <@var{address}> <@var{size}> [DEPRECATED]\r
+@cindex dump_binary\r
+Dump <@var{size}> bytes of target memory starting at <@var{address}> to a\r
+(binary) <@var{file}>.\r
+@end itemize\r
+\r
+@subsection Flash commands\r
+@cindex Flash commands\r
+@itemize @bullet\r
+@item @b{flash banks}\r
+@cindex flash banks\r
+List configured flash banks \r
+@item @b{flash info} <@var{num}>\r
+@cindex flash info\r
+Print info about flash bank <@option{num}> \r
+@item @b{flash probe} <@var{num}>\r
+@cindex flash probe\r
+Identify the flash, or validate the parameters of the configured flash. Operation\r
+depends on the flash type. \r
+@item @b{flash erase_check} <@var{num}>\r
+@cindex flash erase_check\r
+Check erase state of sectors in flash bank <@var{num}>. This is the only operation that\r
+updates the erase state information displayed by @option{flash info}. That means you have\r
+to issue an @option{erase_check} command after erasing or programming the device to get\r
+updated information. \r
+@item @b{flash protect_check} <@var{num}>\r
+@cindex flash protect_check\r
+Check protection state of sectors in flash bank <num>. \r
+\r
+@item @b{flash erase} <@var{num}> <@var{first}> <@var{last}> [DEPRECATED]\r
+@cindex flash erase\r
+Erase sectors at bank <@var{num}>, starting at sector <@var{first}> up to and including\r
+<@var{last}>. Sector numbering starts at 0. Depending on the flash type, erasing might\r
+require the protection to be disabled first (e.g. Intel Advanced Bootblock flash using\r
+the CFI driver). This command was replaced by the new command\r
+@option{flash erase_sector} using the same syntax. \r
+@item @b{flash erase_sector} <@var{num}> <@var{first}> <@var{last}>\r
+@cindex flash erase_sector\r
+Erase sectors at bank <@var{num}>, starting at sector <@var{first}> up to and including\r
+<@var{last}>. Sector numbering starts at 0. Depending on the flash type, erasing might\r
+require the protection to be disabled first (e.g. Intel Advanced Bootblock flash using\r
+the CFI driver).\r
+@item @b{flash erase_address} <@var{address}> <@var{length}>\r
+@cindex flash erase_address\r
+Erase sectors starting at <@var{address}> for <@var{length}> number of bytes\r
+@item @b{flash write} <@var{num}> <@var{file}> <@var{offset}> [DEPRECATED]\r
+@cindex flash write\r
+Write the binary <@var{file}> to flash bank <@var{num}>, starting at <@var{offset}>\r
+bytes from the beginning of the bank. This command was replaced by the new command\r
+@option{flash write_binary} using the same syntax. \r
+@item @b{flash write_binary} <@var{num}> <@var{file}> <@var{offset}>\r
+@cindex flash write_binary\r
+Write the binary <@var{file}> to flash bank <@var{num}>, starting at\r
+<@option{offset}> bytes from the beginning of the bank. \r
+@item @b{flash write_image} <@var{file}> [@var{offset}] [@var{type}]\r
+@cindex flash write_image\r
+Write the image <@var{file}> to the current target's flash bank(s). A relocation\r
+[@var{offset}] can be specified and the file [@var{type}] can be specified\r
+explicitly as @option{bin} (binary), @option{ihex} (Intel hex), @option{elf}\r
+(ELF file) or @option{s19} (Motorola s19). \r
+@item @b{flash protect} <@var{num}> <@var{first}> <@var{last}> <@option{on}|@option{off}>\r
+@cindex flash protect\r
+Enable (@var{on}) or disable (@var{off}) protection of flash sectors <@var{first}> to\r
+<@var{last}> of @option{flash bank} <@var{num}>. \r
+@item @b{flash auto_erase} <@var{on}|@var{off}>\r
+@cindex flash auto_erase\r
+Enable (@option{on}) to erase flash banks prior to writing using the flash @option{write_image} command\r
+only. Default is (@option{off}), flash banks have to be erased using @option{flash erase} command. \r
+@end itemize\r
+\r
+@page\r
+@section Target Specific Commands\r
+@cindex Target Specific Commands\r
+\r
+@subsection AT91SAM7 specific commands\r
+@cindex AT91SAM7 specific commands\r
+The flash configuration is deduced from the chip identification register. The flash\r
+controller handles erases automatically on a page (128/265 byte) basis so erase is\r
+not necessary for flash programming. AT91SAM7 processors with less than 512K flash\r
+only have a single flash bank embedded on chip. AT91SAM7xx512 have two flash planes\r
+that can be erased separatly.Only an EraseAll command is supported by the controller\r
+for each flash plane and this is called with\r
+@itemize @bullet\r
+@item @b{flash erase} <@var{num}> @var{first_plane} @var{last_plane}\r
+bulk erase flash planes first_plane to last_plane. \r
+@item @b{at91sam7 gpnvm} <@var{num}> <@var{bit}> <@option{set}|@option{clear}>\r
+@cindex at91sam7 gpnvm\r
+set or clear a gpnvm bit for the processor \r
+@end itemize\r
+\r
+@subsection STR9 specific commands\r
+@cindex STR9 specific commands\r
+These are flash specific commands when using the str9xpec driver.\r
+@itemize @bullet\r
+@item @b{str9xpec enable_turbo} <@var{num}>\r
+@cindex str9xpec enable_turbo\r
+enable turbo mode, simply this will remove the str9 from the chain and talk\r
+directly to the embedded flash controller. \r
+@item @b{str9xpec disable_turbo} <@var{num}>\r
+@cindex str9xpec disable_turbo\r
+restore the str9 into jtag chain. \r
+@item @b{str9xpec lock} <@var{num}>\r
+@cindex str9xpec lock\r
+lock str9 device. The str9 will only respond to an unlock command that will\r
+erase the device. \r
+@item @b{str9xpec unlock} <@var{num}>\r
+@cindex str9xpec unlock\r
+unlock str9 device. \r
+@item @b{str9xpec options_read} <@var{num}>\r
+@cindex str9xpec options_read\r
+read str9 option bytes. \r
+@item @b{str9xpec options_write} <@var{num}>\r
+@cindex str9xpec options_write\r
+write str9 option bytes. \r
+@end itemize\r
+\r
+@subsection STR9 configuration\r
+@cindex STR9 configuration\r
+@itemize @bullet\r
+@item @b{str9x flash_config} <@var{bank}> <@var{BBSR}> <@var{NBBSR}>\r
+<@var{BBADR}> <@var{NBBADR}>\r
+@cindex str9x flash_config\r
+Configure str9 flash controller.\r
+@smallexample\r
+eg. str9x flash_config 0 4 2 0 0x80000\r
+This will setup\r
+BBSR - Boot Bank Size register\r
+NBBSR - Non Boot Bank Size register\r
+BBADR - Boot Bank Start Address register\r
+NBBADR - Boot Bank Start Address register\r
+@end smallexample\r
+@end itemize\r
+\r
+@subsection STR9 option byte configuration\r
+@cindex STR9 option byte configuration\r
+@itemize @bullet\r
+@item @b{str9xpec options_cmap} <@var{num}> <@option{bank0}|@option{bank1}>\r
+@cindex str9xpec options_cmap\r
+configure str9 boot bank. \r
+@item @b{str9xpec options_lvdthd} <@var{num}> <@option{2.4v}|@option{2.7v}>\r
+@cindex str9xpec options_lvdthd\r
+configure str9 lvd threshold. \r
+@item @b{str9xpec options_lvdsel} <@var{num}> <@option{vdd}|@option{vdd_vddq}>\r
+@cindex str9xpec options_lvdsel\r
+configure str9 lvd source. \r
+@item @b{str9xpec options_lvdwarn} <@var{bank}> <@option{vdd}|@option{vdd_vddq}>\r
+@cindex str9xpec options_lvdwarn\r
+configure str9 lvd reset warning source. \r
+@end itemize\r
+\r
+@subsection STM32x specific commands\r
+@cindex STM32x specific commands\r
+ \r
+These are flash specific commands when using the stm32x driver.\r
+@itemize @bullet\r
+@item @b{stm32x lock} <@var{num}>\r
+@cindex stm32x lock\r
+lock stm32 device. \r
+@item @b{stm32x unlock} <@var{num}>\r
+@cindex stm32x unlock\r
+unlock stm32 device. \r
+@item @b{stm32x options_read} <@var{num}>\r
+@cindex stm32x options_read\r
+read stm32 option bytes. \r
+@item @b{stm32x options_write} <@var{num}> <@option{SWWDG}|@option{HWWDG}>\r
+<@option{RSTSTNDBY}|@option{NORSTSTNDBY}> <@option{RSTSTOP}|@option{NORSTSTOP}>\r
+@cindex stm32x options_write\r
+write stm32 option bytes. \r
+@item @b{stm32x mass_erase} <@var{num}>\r
+@cindex stm32x mass_erase\r
+mass erase flash memory. \r
+@end itemize\r
+\r
+@page\r
+@section Architecture Specific Commands\r
+@cindex Architecture Specific Commands\r
+\r
+@subsection ARMV4/5 specific commands\r
+@cindex ARMV4/5 specific commands\r
+\r
+These commands are specific to ARM architecture v4 and v5, like all ARM7/9 systems\r
+or Intel XScale (XScale isn't supported yet).\r
+@itemize @bullet\r
+@item @b{armv4_5 reg}\r
+@cindex armv4_5 reg\r
+Display a list of all banked core registers, fetching the current value from every\r
+core mode if necessary. OpenOCD versions before rev. 60 didn't fetch the current\r
+register value. \r
+@item @b{armv4_5 core_mode} [@option{arm}|@option{thumb}]\r
+@cindex armv4_5 core_mode\r
+Displays the core_mode, optionally changing it to either ARM or Thumb mode.\r
+The target is resumed in the currently set @option{core_mode}. \r
+@end itemize\r
+\r
+@subsection ARM7/9 specific commands\r
+@cindex ARM7/9 specific commands\r
+\r
+These commands are specific to ARM7 and ARM9 targets, like ARM7TDMI, ARM720t,\r
+ARM920t or ARM926EJ-S.\r
+@itemize @bullet\r
+@item @b{arm7_9 sw_bkpts} <@option{enable}|@option{disable}>\r
+@cindex arm7_9 sw_bkpts\r
+Enable/disable use of software breakpoints. On ARMv4 systems, this reserves\r
+one of the watchpoint registers to implement software breakpoints. Disabling\r
+SW Bkpts frees that register again. \r
+@item @b{arm7_9 force_hw_bkpts} <@option{enable}|@option{disable}>\r
+@cindex arm7_9 force_hw_bkpts\r
+When @option{force_hw_bkpts} is enabled, the @option{sw_bkpts} support is disabled, and all\r
+breakpoints are turned into hardware breakpoints.\r
+@item @b{arm7_9 dbgrq} <@option{enable}|@option{disable}>\r
+@cindex arm7_9 dbgrq\r
+Enable use of the DBGRQ bit to force entry into debug mode. This should be\r
+safe for all but ARM7TDMI--S cores (like Philips LPC). \r
+@item @b{arm7_9 fast_writes} <@option{enable}|@option{disable}>\r
+@cindex arm7_9 fast_writes [DEPRECATED]\r
+See @option{arm7_9 fast_memory_access} instead. \r
+@item @b{arm7_9 fast_memory_access} <@option{enable}|@option{disable}>\r
+@cindex arm7_9 fast_memory_access\r
+Allow the OpenOCD to read and write memory without checking completion of\r
+the operation. This provides a huge speed increase, especially with USB JTAG\r
+cables (FT2232), but might be unsafe if used with targets running at a very low\r
+speed, like the 32kHz startup clock of an AT91RM9200. \r
+@item @b{arm7_9 dcc_downloads} <@option{enable}|@option{disable}>\r
+@cindex arm7_9 dcc_downloads\r
+Enable the use of the debug communications channel (DCC) to write larger (>128 byte)\r
+amounts of memory. DCC downloads offer a huge speed increase, but might be potentially\r
+unsafe, especially with targets running at a very low speed. This command was introduced\r
+with OpenOCD rev. 60. \r
+@end itemize\r
+\r
+@subsection ARM920T specific commands\r
+@cindex ARM920T specific commands\r
+\r
+@itemize @bullet\r
+@item @b{arm920t cache_info}\r
+@cindex arm920t cache_info\r
+Print information about the caches found. This allows you to see if your target\r
+is a ARM920T (2x16kByte cache) or ARM922T (2x8kByte cache). \r
+@item @b{arm920t md<bhw>_phys} <@var{addr}> [@var{count}]\r
+@cindex arm920t md<bhw>_phys\r
+Display memory at physical address addr. \r
+@item @b{arm920t mw<bhw>_phys} <@var{addr}> <@var{value}>\r
+@cindex arm920t mw<bhw>_phys\r
+Write memory at physical address addr. \r
+@item @b{arm920t read_cache} <@var{filename}>\r
+@cindex arm920t read_cache\r
+Dump the content of ICache and DCache to a file. \r
+@item @b{arm920t read_mmu} <@var{filename}>\r
+@cindex arm920t read_mmu\r
+Dump the content of the ITLB and DTLB to a file. \r
+@item @b{arm920t virt2phys} <@var{VA}>\r
+@cindex arm920t virt2phys\r
+Translate a virtual address to a physical address. \r
+@end itemize\r
+\r
+@page\r
+@section Debug commands\r
+@cindex Debug commands\r
+The following commands give direct access to the core, and are most likely\r
+only useful while debugging the OpenOCD.\r
+@itemize @bullet\r
+@item @b{arm7_9 write_xpsr} <@var{32-bit value}> <@option{0=cpsr}, @option{1=spsr}>\r
+@cindex arm7_9 write_xpsr\r
+Immediately write either the current program status register (CPSR) or the saved\r
+program status register (SPSR), without changing the register cache (as displayed\r
+by the @option{reg} and @option{armv4_5 reg} commands). \r
+@item @b{arm7_9 write_xpsr_im8} <@var{8-bit value}> <@var{rotate 4-bit}>\r
+<@var{0=cpsr},@var{1=spsr}>\r
+@cindex arm7_9 write_xpsr_im8\r
+Write the 8-bit value rotated right by 2*rotate bits, using an immediate write\r
+operation (similar to @option{write_xpsr}). \r
+@item @b{arm7_9 write_core_reg} <@var{num}> <@var{mode}> <@var{value}>\r
+@cindex arm7_9 write_core_reg\r
+Write a core register, without changing the register cache (as displayed by the\r
+@option{reg} and @option{armv4_5 reg} commands). The <@var{mode}> argument takes the\r
+encoding of the [M4:M0] bits of the PSR. \r
+@end itemize\r
+\r
+@page\r
+@section JTAG commands\r
+@cindex JTAG commands\r
+@itemize @bullet\r
+@item @b{scan_chain}\r
+@cindex scan_chain\r
+Print current scan chain configuration. \r
+@item @b{jtag_reset}\r
+@cindex jtag_reset\r
+Toggle reset lines <@var{trst}> <@var{srst}>. \r
+@item @b{endstate} <@var{tap_state}>\r
+@cindex endstate\r
+Finish JTAG operations in <@var{tap_state}>. \r
+@item @b{runtest} <@var{num_cycles}>\r
+@cindex runtest\r
+Move to Run-Test/Idle, and execute <@var{num_cycles}> \r
+@item @b{statemove} [@var{tap_state}]\r
+@cindex statemove\r
+Move to current endstate or [@var{tap_state}] \r
+@item @b{irscan}\r
+@cindex irscan\r
+Execute IR scan <@var{device}> <@var{instr}> [@var{dev2}] [@var{instr2}] ... \r
+@item @b{drscan}\r
+@cindex drscan\r
+Execute DR scan <@var{device}> [@var{dev2}] [@var{var2}] ... \r
+@item @b{verify_ircapture}\r
+@cindex verify_ircapture\r
+Verify value captured during Capture-IR <@option{enable}|@option{disable}> \r
+@item @b{var}\r
+@cindex var\r
+Allocate, display or delete variable <@var{name}> [@var{num_fields}|@var{del}] [@var{size1}] ... \r
+@item @b{field}\r
+@cindex field\r
+Display/modify variable field <@var{var}> <@var{field}> [@var{value}|@var{flip}] \r
+@end itemize\r
+\r
+@node Sample Scripts\r
+@chapter Sample Scripts\r
+@cindex scripts\r
+\r
+This page will collect some script examples for different CPUs.\r
+\r
+The configuration script can be divided in the following section:\r
+@itemize @bullet\r
+@item daemon configuration\r
+@item interface\r
+@item jtag scan chain\r
+@item target configuration\r
+@item flash configuration \r
+@end itemize\r
+\r
+Detailed information about each section can be found at OpenOCD configuration \r
+\r
+@section OMAP5912 Flash Debug\r
+@cindex OMAP5912 Flash Debug\r
+The following two scripts were used with a wiggler PP and and a TI OMAP5912\r
+dual core processor - (@uref{http://www.ti.com}), on a OMAP5912 OSK board\r
+- (@uref{http://www.spectrumdigital.com}).\r
+@subsection Openocd config\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+\r
+#interface\r
+interface parport\r
+parport_port 0x378\r
+parport_cable wiggler\r
+jtag_speed 0\r
+\r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst\r
+\r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 38 0x0 0x0 0x0\r
+jtag_device 4 0x1 0x0 0xe\r
+jtag_device 8 0x0 0x0 0x0\r
+\r
+#target configuration\r
+daemon_startup reset\r
+\r
+#target <type> <endianness> <reset mode> <chainpos> <variant>\r
+target arm926ejs little run_and_init 1 arm926ejs\r
+target_script 0 reset omap5912_osk.init\r
+run_and_halt_time 0 30\r
+\r
+# omap5912 lcd frame buffer as working area\r
+working_area 0 0x20000000 0x3e800 nobackup\r
+\r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank cfi 0x00000000 0x1000000 2 2 0\r
+@end smallexample\r
+\r
+@subsection Openocd init\r
+@smallexample\r
+#\r
+# halt target\r
+#\r
+poll\r
+sleep 1\r
+halt\r
+wait_halt\r
+#\r
+# disable wdt\r
+#\r
+mww 0xfffec808 0x000000f5\r
+mww 0xfffec808 0x000000a0\r
+\r
+mww 0xfffeb048 0x0000aaaa\r
+sleep 500\r
+mww 0xfffeb048 0x00005555\r
+sleep 500\r
+#\r
+# detect flash\r
+#\r
+flash probe 0\r
+\r
+@end smallexample\r
+\r
+@section STR71x Script\r
+@cindex STR71x Script\r
+The following script was used with an Amontec JTAGkey and a STR710 / STR711 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+ft2232_vid_pid 0x0403 0xcff8\r
+jtag_speed 0\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst srst_pulls_trst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
+target arm7tdmi little run_and_halt 0 arm7tdmi\r
+run_and_halt_time 0 30\r
+\r
+working_area 0 0x2000C000 0x4000 nobackup\r
+ \r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x\r
+@end smallexample\r
+\r
+@section STR750 Script\r
+@cindex STR750 Script\r
+The following script was used with an Amontec JTAGkey and a STR750 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+ft2232_vid_pid 0x0403 0xcff8\r
+jtag_speed 19\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+#reset_config trst_and_srst srst_pulls_trst\r
+reset_config trst_and_srst srst_pulls_trst\r
+\r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+\r
+#jtag nTRST and nSRST delay\r
+jtag_nsrst_delay 500\r
+jtag_ntrst_delay 500\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>\r
+target arm7tdmi little run_and_halt 0 arm7tdmi\r
+run_and_halt_time 0 30\r
+ \r
+working_area 0 0x40000000 0x4000 nobackup\r
+ \r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank str7x 0x20000000 0x000040000 0 0 0 STR75x\r
+@end smallexample\r
+\r
+@section STR912 Script\r
+@cindex STR912 Script\r
+The following script was used with an Amontec JTAGkey and a STR912 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+jtag_speed 1\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 8 0x1 0x1 0xfe\r
+jtag_device 4 0x1 0xf 0xe\r
+jtag_device 5 0x1 0x1 0x1e\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm966e <endianness> <reset mode> <chainpos> <variant>\r
+target arm966e little reset_halt 1 arm966e\r
+run_and_halt_time 0 30\r
+ \r
+working_area 0 0x50000000 16384 nobackup\r
+ \r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank str9x 0x00000000 0x00080000 0 0 0\r
+@end smallexample\r
+\r
+@section STR912 comstick\r
+@cindex STR912 comstick Script\r
+The following script was used with a Hitex STR9 Comstick:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "STR9-comStick A"\r
+ft2232_layout comstick\r
+jtag_speed 1\r
+\r
+jtag_nsrst_delay 100\r
+jtag_ntrst_delay 100\r
+\r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 8 0x1 0x1 0xfe\r
+jtag_device 4 0x1 0xf 0xe\r
+jtag_device 5 0x1 0x1 0x1e\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm966e <endianness> <reset mode> <chainpos> <variant>\r
+target arm966e little reset_halt 1 arm966e\r
+run_and_halt_time 0 30\r
+ \r
+working_area 0 0x50000000 16384 nobackup\r
+ \r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank str9x 0x00000000 0x00080000 0 0 0\r
+@end smallexample\r
+\r
+@section STM32x Script\r
+@cindex STM32x Script\r
+The following script was used with an Amontec JTAGkey and a STM32x cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+jtag_speed 10\r
+\r
+jtag_nsrst_delay 100\r
+jtag_ntrst_delay 100\r
+\r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+jtag_device 5 0x1 0x1 0x1e\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target cortex_m3 <endianness> <reset mode> <chainpos> <variant>\r
+target cortex_m3 little run_and_halt 0\r
+run_and_halt_time 0 30\r
+ \r
+working_area 0 0x20000000 16384 nobackup\r
+ \r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank stm32x 0x08000000 0x00020000 0 0 0\r
+@end smallexample\r
+\r
+@section STM32x Performance Stick\r
+@cindex STM32x Performance Stick Script\r
+The following script was used with the Hitex STM32 Performance Stick\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "STM32-PerformanceStick A"\r
+ft2232_layout stm32stick\r
+jtag_speed 10\r
+\r
+jtag_nsrst_delay 100\r
+jtag_ntrst_delay 100\r
+\r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+jtag_device 5 0x1 0x1 0x1e\r
+jtag_device 4 0x1 0xf 0xe\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target cortex_m3 <endianness> <reset mode> <chainpos> <variant>\r
+target cortex_m3 little run_and_halt 0\r
+run_and_halt_time 0 30\r
+ \r
+working_area 0 0x20000000 16384 nobackup\r
+ \r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank stm32x 0x08000000 0x00020000 0 0 0\r
+@end smallexample\r
+\r
+@section LPC2129 Script\r
+@cindex LPC2129 Script\r
+The following script was used with an wiggler PP and a LPC-2129 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface parport\r
+parport_port 0x378\r
+parport_cable wiggler\r
+jtag_speed 0\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst srst_pulls_trst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4\r
+run_and_halt_time 0 30\r
+ \r
+working_area 0 0x40000000 0x4000 nobackup\r
+ \r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum\r
+@end smallexample\r
+\r
+@section LPC2148 Script\r
+@cindex LPC2148 Script\r
+The following script was used with an Amontec JTAGkey and a LPC2148 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+ft2232_vid_pid 0x0403 0xcff8\r
+jtag_speed 3\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst srst_pulls_trst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4\r
+run_and_halt_time 0 30\r
+ \r
+working_area 0 0x40000000 0x8000 nobackup\r
+ \r
+#flash configuration\r
+flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v1 14765 calc_checksum\r
+@end smallexample\r
+\r
+@section LPC2294 Script\r
+@cindex LPC2294 Script\r
+The following script was used with an Amontec JTAGkey and a LPC2294 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+ft2232_vid_pid 0x0403 0xcff8\r
+jtag_speed 3\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst srst_pulls_trst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4\r
+run_and_halt_time 0 30\r
+ \r
+working_area 0 0x40000000 0x4000 nobackup\r
+ \r
+#flash configuration\r
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum\r
+@end smallexample\r
+\r
+@section AT91R40008 Script\r
+@cindex AT91R40008 Script\r
+The following script was used with an Amontec JTAGkey and a AT91R40008 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+ft2232_vid_pid 0x0403 0xcff8\r
+jtag_speed 0\r
+jtag_nsrst_delay 200\r
+jtag_ntrst_delay 200\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config srst_only srst_pulls_trst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
+target arm7tdmi little run_and_halt 0 arm7tdmi\r
+run_and_halt_time 0 30\r
+@end smallexample\r
+\r
+@section AT91SAM7s Script\r
+@cindex AT91SAM7s Script\r
+The following script was used with an Olimex ARM-JTAG-OCD and a AT91SAM7S64 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Olimex OpenOCD JTAG A"\r
+ft2232_layout olimex-jtag\r
+ft2232_vid_pid 0x15BA 0x0003\r
+jtag_speed 0\r
+jtag_nsrst_delay 200\r
+jtag_ntrst_delay 200\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config srst_only srst_pulls_trst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
+target arm7tdmi little run_and_halt 0 arm7tdmi\r
+run_and_halt_time 0 30\r
+ \r
+# flash-options AT91\r
+working_area 0 0x00200000 0x4000 nobackup\r
+flash bank at91sam7 0 0 0 0 0\r
+ \r
+# Information: \r
+# erase command (telnet-interface) for complete flash:\r
+# flash erase <num> 0 numlockbits-1 (can be seen from output of flash info 0)\r
+# SAM7S64 with 16 lockbits and bank 0: flash erase 0 0 15\r
+# set/clear NVM-Bits:\r
+# at91sam7 gpnvm <num> <bit> <set|clear>\r
+# disable locking from SAM-BA:\r
+# flash protect 0 0 1 off\r
+@end smallexample\r
+\r
+@section XSCALE IXP42x Script\r
+@cindex XSCALE IXP42x Script\r
+The following script was used with an Amontec JTAGkey-Tiny and a xscale ixp42x cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+\r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+ft2232_vid_pid 0x0403 0xcff8\r
+jtag_speed 0\r
+jtag_nsrst_delay 200\r
+jtag_ntrst_delay 200\r
+ \r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config srst_only srst_pulls_trst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 7 0x1 0x7f 0x7e\r
+ \r
+#target configuration\r
+daemon_startup reset\r
+ \r
+#target <type> <startup mode>\r
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>\r
+target xscale big run_and_halt 0 IXP42x\r
+run_and_halt_time 0 30\r
+@end smallexample\r
+\r
+@section Cirrus Logic EP9301 Script\r
+@cindex Cirrus Logic EP9301 Script\r
+The following script was used with FT2232 based JTAG interfaces and a\r
+Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+ \r
+#interface\r
+interface ft2232\r
+\r
+#Olimex ARM-USB-OCD\r
+#ft2232_device_desc "Olimex OpenOCD JTAG"\r
+#ft2232_layout olimex-jtag\r
+#ft2232_vid_pid 0x15ba 0x0003\r
+ \r
+#Amontec JTAGkey (and JTAGkey-Tiny)\r
+#Serial is only necessary if more than one JTAGkey is connected\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+#ft2232_serial AMTJKV31\r
+#ft2232_serial T1P3S2W8\r
+ft2232_layout jtagkey\r
+ft2232_vid_pid 0x0403 0xcff8\r
+ \r
+#wiggler/parallel port interface\r
+#interface parport\r
+#parport_port 0x378\r
+#parport_cable wiggler\r
+#jtag_speed 0\r
+jtag_speed 1\r
+reset_config trst_and_srst\r
+ \r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+ \r
+jtag_nsrst_delay 100\r
+jtag_ntrst_delay 100\r
+ \r
+#target configuration\r
+daemon_startup attach\r
+ \r
+#target <type> <endianess> <reset mode>\r
+target arm920t little reset_halt 0\r
+working_area 0 0x80014000 0x1000 backup\r
+ \r
+#flash configuration\r
+#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]\r
+flash bank cfi 0x60000000 0x1000000 2 2 0\r
+@end smallexample\r
+\r
+@section Hilscher netX 100 / 500 Script\r
+@cindex Hilscher netX 100 / 500 Script\r
+The following script was used with an Amontec JTAGkey and a Hilscher\r
+netX 500 cpu:\r
+@smallexample\r
+#daemon configuration\r
+telnet_port 4444\r
+gdb_port 3333\r
+\r
+#interface\r
+interface ft2232\r
+ft2232_device_desc "Amontec JTAGkey A"\r
+ft2232_layout jtagkey\r
+ft2232_vid_pid 0x0403 0xcff8\r
+jtag_speed 5\r
+\r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst\r
+\r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 4 0x1 0xf 0xe\r
+\r
+jtag_nsrst_delay 100\r
+jtag_ntrst_delay 100\r
+\r
+#target configuration\r
+daemon_startup reset\r
+\r
+#target <type> <endianness> <startup mode> <chainpos> <variant>\r
+target arm926ejs little run_and_halt 0 arm926ejs\r
+run_and_halt_time 0 500\r
+@end smallexample\r
+\r
+@section Marvell/Intel PXA270 Script\r
+@cindex Marvell/Intel PXA270 Script\r
+@smallexample\r
+# config for Intel PXA270\r
+# not, as of 2007-06-22, openocd only works with the\r
+# libftd2xx library from ftdi. libftdi does not work.\r
+\r
+telnet_port 3333\r
+gdb_port 4444\r
+\r
+interface ft2232\r
+ft2232_layout olimex-jtag\r
+ft2232_vid_pid 0x15BA 0x0003\r
+ft2232_device_desc "Olimex OpenOCD JTAG"\r
+jtag_speed 0\r
+# set jtag_nsrst_delay to the delay introduced by your reset circuit\r
+# the rest of the needed delays are built into the openocd program\r
+jtag_nsrst_delay 260\r
+# set the jtag_ntrst_delay to the delay introduced by a reset circuit\r
+# the rest of the needed delays are built into the openocd program\r
+jtag_ntrst_delay 0\r
+\r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst separate\r
+\r
+#jtag scan chain\r
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
+jtag_device 7 0x1 0x7f 0x7e\r
+\r
+#target configuration\r
+daemon_startup reset\r
+\r
+target xscale little reset_halt 0 pxa27x\r
+\r
+# maps to PXA internal RAM. If you are using a PXA255\r
+# you must initialize SDRAM or leave this option off\r
+working_area 0 0x5c000000 0x10000 nobackup\r
+\r
+run_and_halt_time 0 30\r
+\r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+# works for P30 flash\r
+flash bank cfi 0x00000000 0x1000000 2 4 0\r
+@end smallexample\r
+\r
+@node GDB and Openocd\r
+@chapter GDB and Openocd\r
+@cindex GDB and Openocd\r
+Openocd complies with the remote gdbserver protocol, and as such can be used\r
+to debug remote targets.\r
+\r
+@section Connecting to gdb\r
+@cindex Connecting to gdb\r
+A connection is typically started as follows:\r
+@smallexample\r
+target remote localhost:3333\r
+@end smallexample\r
+This would cause gdb to connect to the gdbserver on the local pc using port 3333.\r
+\r
+To see a list of available openocd commands type @option{monitor help} on the\r
+gdb commandline.\r
+\r
+Openocd supports the gdb @option{qSupported} packet, this enables information\r
+to be sent by the gdb server (openocd) to gdb. Typical information includes\r
+packet size and device memory map.\r
+\r
+Previous versions of openocd required the following gdb options to increase\r
+the packet size and speed up gdb communication.\r
+@smallexample\r
+set remote memory-write-packet-size 1024\r
+set remote memory-write-packet-size fixed\r
+set remote memory-read-packet-size 1024\r
+set remote memory-read-packet-size fixed\r
+@end smallexample\r
+This is now handled in the @option{qSupported} PacketSize.\r
+\r
+@section Programming using gdb\r
+@cindex Programming using gdb\r
+\r
+By default the target memory map is not sent to gdb, this can be enabled by\r
+the following openocd config option:\r
+@smallexample\r
+gdb_memory_map enable\r
+@end smallexample\r
+For this to function correctly a valid flash config must also be configured\r
+in openocd. For speed also configure a valid working area.\r
+\r
+Informing gdb of the memory map of the target will enable gdb to protect any\r
+flash area of the target and use hardware breakpoints by default. This means\r
+that the openocd option @option{arm7_9 force_hw_bkpts} is not required when\r
+using a memory map.\r
+\r
+To view the configured memory map in gdb, use the gdb command @option{info mem}\r
+All other unasigned addresses within gdb are treated as ram.\r
+\r
+If @option{gdb_flash_program enable} is also used, gdb will be able to\r
+program any flash memory using the vFlash interface.\r
+\r
+gdb will look at the target memory map when a load command is given, if any\r
+areas to be programmed lie within the target flash area the vFlash packets\r
+will be used.\r
+\r
+Incase the target needs configuring before gdb programming, a script can be executed.\r
+@smallexample\r
+target_script 0 gdb_program_config config.script\r
+@end smallexample\r
+\r
+To verify any flash programming the gdb command @option{compare-sections}\r
+can be used.\r
+\r
+@node FAQ\r
+@chapter FAQ\r
+@cindex faq\r
+@enumerate\r
+@item OpenOCD complains about a missing cygwin1.dll\r
+\r
+Make sure you have Cygwin installed, or at least a version of OpenOCD that\r
+claims to come with all the necessary dlls. When using Cygwin, try launching\r
+the OpenOCD from the Cygwin shell.\r
+\r
+@item I'm trying to set a breakpoint using GDB (or a frontend like Insight or\r
+Eclipse), but OpenOCD complains that "Info: arm7_9_common.c:213\r
+arm7_9_add_breakpoint(): sw breakpoint requested, but software breakpoints not enabled".\r
+\r
+GDB issues software breakpoints when a normal breakpoint is requested, or to implement\r
+source-line single-stepping. On ARMv4T systems, like ARM7TDMI, ARM720t or ARM920t,\r
+software breakpoints consume one of the two available hardware breakpoints,\r
+and are therefor disabled by default. If your code is running from RAM, you\r
+can enable software breakpoints with the @option{arm7_9 sw_bkpts enable} command. If\r
+your code resides in Flash, you can't use software breakpoints, but you can force\r
+OpenOCD to use hardware breakpoints instead: @option{arm7_9 force_hw_bkpts enable}.\r
+\r
+@item When erasing or writing LPC2000 on-chip flash, the operation fails sometimes\r
+and works sometimes fine.\r
+\r
+Make sure the core frequency specified in the @option{flash lpc2000} line matches the\r
+clock at the time you're programming the flash. If you've specified the crystal's\r
+frequency, make sure the PLL is disabled, if you've specified the full core speed\r
+(e.g. 60MHz), make sure the PLL is enabled.\r
+\r
+@item When debugging using an Amontec Chameleon in its JTAG Accelerator configuration,\r
+I keep getting "Error: amt_jtagaccel.c:184 amt_wait_scan_busy(): amt_jtagaccel timed\r
+out while waiting for end of scan, rtck was disabled".\r
+\r
+Make sure your PC's parallel port operates in EPP mode. You might have to try several\r
+settings in your PC Bios (ECP, EPP, and different versions of those).\r
+\r
+@item When debugging with the OpenOCD and GDB (plain GDB, Insight, or Eclipse),\r
+I get lots of "Error: arm7_9_common.c:1771 arm7_9_read_memory():\r
+memory read caused data abort". \r
+\r
+The errors are non-fatal, and are the result of GDB trying to trace stack frames\r
+beyond the last valid frame. It might be possible to prevent this by setting up\r
+a proper "initial" stack frame, if you happen to know what exactly has to\r
+be done, feel free to add this here.\r
+\r
+@item I get the following message in the OpenOCD console (or log file):\r
+"Warning: arm7_9_common.c:679 arm7_9_assert_reset(): srst resets test logic, too".\r
+\r
+This warning doesn't indicate any serious problem, as long as you don't want to\r
+debug your core right out of reset. Your .cfg file specified @option{jtag_reset\r
+trst_and_srst srst_pulls_trst} to tell the OpenOCD that either your board,\r
+your debugger or your target uC (e.g. LPC2000) can't assert the two reset signals\r
+independently. With this setup, it's not possible to halt the core right out of\r
+reset, everything else should work fine.\r
+\r
+@item When using OpenOCD in conjunction with Amontec JTAGkey and the Yagarto\r
+Toolchain (Eclipse, arm-elf-gcc, arm-elf-gdb), the debugging seems to be\r
+unstable. When single-stepping over large blocks of code, GDB and OpenOCD\r
+quit with an error message. Is there a stability issue with OpenOCD?\r
+\r
+No, this is not a stability issue concering OpenOCD. Most users have solved\r
+this issue by simply using a self-powered USB Hub, which they connect their\r
+Amontec JTAGkey to. Apparently, some computers do not provide a USB power\r
+supply stable enough for the Amontec JTAGkey to be operated.\r
+\r
+@item When using the Amontec JTAGkey, sometimes OpenOCD crashes with the\r
+following error messages: "Error: ft2232.c:201 ft2232_read(): FT_Read returned:\r
+4" and "Error: ft2232.c:365 ft2232_send_and_recv(): couldn't read from FT2232".\r
+What does that mean and what might be the reason for this?\r
+\r
+First of all, the reason might be the USB power supply. Try using a self-powered\r
+hub instead of a direct connection to your computer. Secondly, the error code 4\r
+corresponds to an FT_IO_ERROR, which means that the driver for the FTDI USB\r
+Chip ran into some sort of error - this points us to a USB problem.\r
+\r
+@item When using the Amontec JTAGkey, sometimes OpenOCD crashes with the following\r
+error message: "Error: gdb_server.c:101 gdb_get_char(): read: 10054".\r
+What does that mean and what might be the reason for this?\r
+\r
+Error code 10054 corresponds to WSAECONNRESET, which means that the debugger (GDB)\r
+has closed the connection to OpenOCD. This might be a GDB issue.\r
+\r
+@item In the configuration file in the section where flash device configurations\r
+are described, there is a parameter for specifying the clock frequency for\r
+LPC2000 internal flash devices (e.g.\r
+@option{flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14746 calc_checksum}),\r
+which must be sepcified in kilohertz. However, I do have a quartz crystal of a\r
+frequency that contains fractions of kilohertz (e.g. 14,745,600 Hz, i.e. 14,745.600 kHz).\r
+Is it possible to specify real numbers for the clock frequency?\r
+\r
+No. The clock frequency specified here must be given as an integral number.\r
+However, this clock frequency is used by the In-Application-Programming (IAP)\r
+routines of the LPC2000 family only, which seems to be very tolerant concerning\r
+the given clock frequency, so a slight difference between the specified clock\r
+frequency and the actual clock frequency will not cause any trouble.\r
+\r
+@item Do I have to keep a specific order for the commands in the configuration file?\r
+\r
+Well, yes and no. Commands can be given in arbitrary order, yet the devices\r
+listed for the JTAG scan chain must be given in the right order (jtag_device),\r
+with the device closest to the TDO-Pin being listed first. In general,\r
+whenever objects of the same type exist which require an index number, then\r
+these objects must be given in the right order (jtag_devices, targets and flash\r
+banks - a target references a jtag_device and a flash bank references a target).\r
+\r
+@item Sometimes my debugging session terminates with an error. When I look into the\r
+log file, I can see these error messages: Error: arm7_9_common.c:561\r
+arm7_9_execute_sys_speed(): timeout waiting for SYSCOMP\r
+ \r
+@end enumerate\r
+\r
+@include fdl.texi\r
+\r
+@node Index\r
+@unnumbered Index\r
+\r
+@printindex cp\r
+\r
+@bye\r
projects / openocd / commitdiff