- Fixes '=' whitespace

- Replace '\(\w\)\(=\)\(\w\)' with '\1 \2 \3'.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2391 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/flash/at91sam3.c b/src/flash/at91sam3.c
index da3e62422d9bf5d450144215877dd9f2d33c22c5..5a878f1e1782cf34cd8f3e8f7e7a67aeb42f0773 100644 (file)
--- a/src/flash/at91sam3.c
+++ b/src/flash/at91sam3.c
@@ -756,7 +756,7 @@ FLASHD_ReadUniqueID ( struct sam3_bank_private *pPrivate )
        }
 
     r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_SPUI, 0, NULL );
-       LOG_DEBUG("End: R=%d, id=0x%08x, 0x%08x, 0x%08x, 0x%08x",
+       LOG_DEBUG("End: R=%d, id = 0x%08x, 0x%08x, 0x%08x, 0x%08x",
                          r, 
                          (unsigned int)(pPrivate->pChip->cfg.unique_id[0]),
                          (unsigned int)(pPrivate->pChip->cfg.unique_id[1]),
@@ -1272,9 +1272,9 @@ sam3_explain_ckgr_plla( struct sam3_chip *pChip )
        sam3_sprintf(pChip,"\n");
        pChip->cfg.plla_freq = 0;
        if ( mula == 0 ){
-               sam3_sprintf(pChip,"\tPLLA Freq: (Disabled,mula=0)\n");
+               sam3_sprintf(pChip,"\tPLLA Freq: (Disabled,mula = 0)\n");
        } else if ( diva == 0 ){
-               sam3_sprintf(pChip,"\tPLLA Freq: (Disabled,diva=0)\n");
+               sam3_sprintf(pChip,"\tPLLA Freq: (Disabled,diva = 0)\n");
        } else if ( diva == 1 ){
                pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula+1));
                sam3_sprintf(pChip,"\tPLLA Freq: %3.03f MHz\n",
@@ -1945,7 +1945,7 @@ sam3_page_read( struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *b
 
 // The code below is basically this:
 // compiled with
-// arm-none-eabi-gcc -mthumb -mcpu=cortex-m3 -O9 -S ./foobar.c -o foobar.s
+// arm-none-eabi-gcc -mthumb -mcpu = cortex-m3 -O9 -S ./foobar.c -o foobar.s
 //
 // Only the *CPU* can write to the flash buffer.
 // the DAP cannot... so - we download this 28byte thing
@@ -2185,7 +2185,7 @@ sam3_write(struct flash_bank_s *bank,
        // intermediate large pages
        // also - the final *terminal* 
        // if that terminal page is a full page
-       LOG_DEBUG("Full Page Loop: cur=%d, end=%d, count=0x%08x", 
+       LOG_DEBUG("Full Page Loop: cur=%d, end=%d, count = 0x%08x", 
                          (int)page_cur, (int)page_end, (unsigned int)(count) );
 
        while ( (page_cur < page_end) && 
@@ -2201,7 +2201,7 @@ sam3_write(struct flash_bank_s *bank,
 
        // terminal partial page?
        if ( count ){
-               LOG_DEBUG("Terminal partial page, count=0x%08x", (unsigned int)(count));
+               LOG_DEBUG("Terminal partial page, count = 0x%08x", (unsigned int)(count));
                // we have a partial page
                r = sam3_page_read( pPrivate, page_cur, pagebuffer );
                if ( r != ERROR_OK ){

diff --git a/src/helper/membuf.h b/src/helper/membuf.h
index 4990854dd6fa79b4820dcedc92fb973b20cebeae..b45850f1aaf302fceddb5d2c490a2cde9a2b1bfc 100644 (file)
--- a/src/helper/membuf.h
+++ b/src/helper/membuf.h
@@ -80,7 +80,7 @@ int membuf_vsprintf( struct membuf *pBuf , const char *fmt, va_list ap);
  * @param pBuf - buffer to tokenize
  * @param delim - delimiter parameter for strtok_r()
  * 
- * Identical to "strtok()" - pass "pBuff=NULL" on second call
+ * Identical to "strtok()" - pass "pBuff = NULL" on second call
  *
  * NOTE: This call is <b>destructive</b> to the buffer.
  */