Add support for Gumstix AeroCore device

The Gumstix AeroCore board [1] contains a STM32F427 microcontroller.
Schematics for this board will also be made available [2].
The JTAG interface for this chip can be accessed via a USB connection
provided by an FTDI chip (0403:6011).

[1] https://store.gumstix.com/index.php/products/585/
[2] https://pubs.gumstix.com/boards/AEROCORE

Change-Id: I0bf3bb525f51528bedd807b1f7210b09ef2e1015
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Reviewed-on: http://openocd.zylin.com/2117
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/tcl/board/gumstix-aerocore.cfg b/tcl/board/gumstix-aerocore.cfg
new file mode 100644 (file)
index 0000000..ba217c0
--- /dev/null
+++ b/tcl/board/gumstix-aerocore.cfg
@@ -0,0 +1,10 @@
+# JTAG for the STM32F4x chip used on the Gumstix AeroCore is available on
+# the first interface of a Quad FTDI chip.  nTRST is bit 4.
+interface ftdi
+ftdi_vid_pid 0x0403 0x6011
+
+ftdi_layout_init 0x0000 0x001b
+ftdi_layout_signal nTRST -data 0x0010
+
+source [find target/stm32f4x.cfg]
+reset_config trst_only