.shutdown = &genphy_shutdown,
};
+/**
+ * KSZ8895
+ */
+
+static unsigned short smireg_to_phy(unsigned short reg)
+{
+ return ((reg & 0xc0) >> 3) + 0x06 + ((reg & 0x20) >> 5);
+}
+
+static unsigned short smireg_to_reg(unsigned short reg)
+{
+ return reg & 0x1F;
+}
+
+static void ksz8895_write_smireg(struct phy_device *phydev, int smireg, int val)
+{
+ phydev->bus->write(phydev->bus, smireg_to_phy(smireg), MDIO_DEVAD_NONE,
+ smireg_to_reg(smireg), val);
+}
+
+#if 0
+static int ksz8895_read_smireg(struct phy_device *phydev, int smireg)
+{
+ return phydev->bus->read(phydev->bus, smireg_to_phy(smireg),
+ MDIO_DEVAD_NONE, smireg_to_reg(smireg));
+}
+#endif
+
+int ksz8895_config(struct phy_device *phydev)
+{
+ /* we are connected directly to the switch without
+ * dedicated PHY. SCONF1 == 001 */
+ phydev->link = 1;
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_100;
+
+ /* Force the switch to start */
+ ksz8895_write_smireg(phydev, 1, 1);
+
+ return 0;
+}
+
+static int ksz8895_startup(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static struct phy_driver ksz8895_driver = {
+ .name = "Micrel KSZ8895/KSZ8864",
+ .uid = 0x221450,
+ .mask = 0xffffe1,
+ .features = PHY_BASIC_FEATURES,
+ .config = &ksz8895_config,
+ .startup = &ksz8895_startup,
+ .shutdown = &genphy_shutdown,
+};
+
#ifndef CONFIG_PHY_MICREL_KSZ9021
/*
* I can't believe Micrel used the exact same part number
phy_register(&KS8721_driver);
#endif
phy_register(&ksz9031_driver);
+ phy_register(&ksz8895_driver);
return 0;
}
*(__b2 + __i) = SMC_inb((a),(r)); \
}; \
}while(0)
-
+#elif defined(CONFIG_MS7206SE)
+#define SWAB7206(x) ({ word __x = x; ((__x << 8)|(__x >> 8)); })
+#define SMC_inw(a, r) *((volatile word*)((a)->iobase + (r)))
+#define SMC_inb(a, r) (*((volatile byte*)((a)->iobase + ((r) ^ 0x01))))
+#define SMC_insw(a, r, b, l) \
+ do { \
+ int __i; \
+ word *__b2 = (word *)(b); \
+ for (__i = 0; __i < (l); __i++) { \
+ *__b2++ = SWAB7206(SMC_inw(a, r)); \
+ } \
+ } while (0)
+#define SMC_outw(a, d, r) (*((volatile word *)((a)->iobase+(r))) = d)
+#define SMC_outb(a, d, r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((a), ((r)&(~1))); \
+ if (((r) & 1)) \
+ __w = (__w & 0x00ff) | (__d << 8); \
+ else \
+ __w = (__w & 0xff00) | (__d); \
+ SMC_outw((a), __w, ((r)&(~1))); \
+ })
+#define SMC_outsw(a, r, b, l) \
+ do { \
+ int __i; \
+ word *__b2 = (word *)(b); \
+ for (__i = 0; __i < (l); __i++) { \
+ SMC_outw(a, SWAB7206(*__b2), r); \
+ __b2++; \
+ } \
+ } while (0)
#else /* if not CONFIG_CPU_PXA25X and not CONFIG_LEON */
#ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */