return ERROR_OK;
}
-static int mips32_pracc_exec_read(struct mips32_pracc_context *ctx, uint32_t address)
+/* Shift in control and address for a new processor access, save them in ejtag_info */
+static int mips32_pracc_read_ctrl_addr(struct mips_ejtag *ejtag_info)
{
- uint32_t code;
-
- if ((address >= MIPS32_PRACC_TEXT)
- && (address < MIPS32_PRACC_TEXT + ctx->code_len * 4)) {
- int offset = (address - MIPS32_PRACC_TEXT) / 4;
- code = ctx->code[offset];
- } else if (address >= 0xFF200000) {
- /* CPU keeps reading at the end of execution.
- * If we after 0xF0000000 address range, we can use
- * one shot jump instruction.
- * Since this instruction is limited to
- * 26bit, we need to do some magic to fit it to our needs. */
- LOG_DEBUG("Reading unexpected address. Jump to 0xFF200200\n");
- code = MIPS32_J((0x0FFFFFFF & 0xFF200200) >> 2);
- } else {
- LOG_ERROR("Error reading unexpected address 0x%8.8" PRIx32 "", address);
- return ERROR_JTAG_DEVICE_ERROR;
- }
+ int retval = wait_for_pracc_rw(ejtag_info, &ejtag_info->pa_ctrl);
+ if (retval != ERROR_OK)
+ return retval;
- struct mips_ejtag *ejtag_info = ctx->ejtag_info;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS);
+ ejtag_info->pa_addr = 0;
+ retval = mips_ejtag_drscan_32(ejtag_info, &ejtag_info->pa_addr);
- /* Send the data out */
- mips_ejtag_set_instr(ctx->ejtag_info, EJTAG_INST_DATA);
- mips_ejtag_drscan_32_out(ctx->ejtag_info, code);
+ return retval;
+}
- /* Clear the access pending bit (let the processor eat!) */
- uint32_t ejtag_ctrl = ejtag_info->ejtag_ctrl & ~EJTAG_CTRL_PRACC;
- mips_ejtag_set_instr(ctx->ejtag_info, EJTAG_INST_CONTROL);
- mips_ejtag_drscan_32_out(ctx->ejtag_info, ejtag_ctrl);
+/* Finish processor access */
+static int mips32_pracc_finish(struct mips_ejtag *ejtag_info)
+{
+ uint32_t ctrl = ejtag_info->ejtag_ctrl & ~EJTAG_CTRL_PRACC;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL);
+ mips_ejtag_drscan_32_out(ejtag_info, ctrl);
return jtag_execute_queue();
}
-static int mips32_pracc_exec_write(struct mips32_pracc_context *ctx, uint32_t address)
+int mips32_pracc_clean_text_jump(struct mips_ejtag *ejtag_info)
{
- uint32_t ejtag_ctrl, data;
- struct mips_ejtag *ejtag_info = ctx->ejtag_info;
+ uint32_t jt_code = MIPS32_J((0x0FFFFFFF & MIPS32_PRACC_TEXT) >> 2);
+ int retval;
- mips_ejtag_set_instr(ctx->ejtag_info, EJTAG_INST_DATA);
- int retval = mips_ejtag_drscan_32(ctx->ejtag_info, &data);
- if (retval != ERROR_OK)
- return retval;
+ /* do 3 0/nops to clean pipeline before a jump to pracc text, NOP in delay slot */
+ for (int i = 0; i != 5; i++) {
+ /* Wait for pracc */
+ retval = wait_for_pracc_rw(ejtag_info, &ejtag_info->pa_ctrl);
+ if (retval != ERROR_OK)
+ return retval;
- /* Clear access pending bit */
- ejtag_ctrl = ejtag_info->ejtag_ctrl & ~EJTAG_CTRL_PRACC;
- mips_ejtag_set_instr(ctx->ejtag_info, EJTAG_INST_CONTROL);
- mips_ejtag_drscan_32_out(ctx->ejtag_info, ejtag_ctrl);
+ /* Data or instruction out */
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA);
+ uint32_t data = (i == 3) ? jt_code : MIPS32_NOP;
+ mips_ejtag_drscan_32_out(ejtag_info, data);
- retval = jtag_execute_queue();
+ /* finish pa */
+ retval = mips32_pracc_finish(ejtag_info);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ if (ejtag_info->mode != 0) /* done, queued mode won't work with lexra cores */
+ return ERROR_OK;
+
+ retval = mips32_pracc_read_ctrl_addr(ejtag_info);
if (retval != ERROR_OK)
return retval;
- if ((address >= MIPS32_PRACC_PARAM_OUT)
- && (address < MIPS32_PRACC_PARAM_OUT + ctx->num_oparam * 4)) {
- int offset = (address - MIPS32_PRACC_PARAM_OUT) / 4;
- ctx->local_oparam[offset] = data;
- } else {
- LOG_ERROR("Error writing unexpected address 0x%8.8" PRIx32 "", address);
- return ERROR_JTAG_DEVICE_ERROR;
+ if (ejtag_info->pa_addr != MIPS32_PRACC_TEXT) { /* LEXRA/BMIPS ?, shift out another NOP */
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA);
+ mips_ejtag_drscan_32_out(ejtag_info, MIPS32_NOP);
+ retval = mips32_pracc_finish(ejtag_info);
+ if (retval != ERROR_OK)
+ return retval;
}
return ERROR_OK;
}
-int mips32_pracc_exec(struct mips_ejtag *ejtag_info, int code_len, const uint32_t *code,
- int num_param_out, uint32_t *param_out, int cycle)
+int mips32_pracc_exec(struct mips_ejtag *ejtag_info, struct pracc_queue_info *ctx, uint32_t *param_out)
{
- struct mips32_pracc_context ctx;
- ctx.local_oparam = param_out;
- ctx.num_oparam = num_param_out;
- ctx.code = code;
- ctx.code_len = code_len;
- ctx.ejtag_info = ejtag_info;
- int pass = 0;
+ int code_count = 0;
+ int store_pending = 0; /* increases with every store instruction at dmseg, decreases with every store pa */
+ uint32_t max_store_addr = 0; /* for store pa address testing */
+ bool restart = 0; /* restarting control */
+ int restart_count = 0;
+ uint32_t instr = 0;
+ bool final_check = 0; /* set to 1 if in final checks after function code shifted out */
+ bool pass = 0; /* to check the pass through pracc text after function code sent */
+ int retval;
while (1) {
- uint32_t ejtag_ctrl;
- int retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl);
- if (retval != ERROR_OK)
- return retval;
+ if (restart) {
+ if (restart_count < 3) { /* max 3 restarts allowed */
+ retval = mips32_pracc_clean_text_jump(ejtag_info);
+ if (retval != ERROR_OK)
+ return retval;
+ } else
+ return ERROR_JTAG_DEVICE_ERROR;
+ restart_count++;
+ restart = 0;
+ code_count = 0;
+ LOG_DEBUG("restarting code");
+ }
- uint32_t address = 0;
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS);
- retval = mips_ejtag_drscan_32(ejtag_info, &address);
+ retval = mips32_pracc_read_ctrl_addr(ejtag_info); /* update current pa info: control and address */
if (retval != ERROR_OK)
return retval;
- /* Check for read or write */
- if (ejtag_ctrl & EJTAG_CTRL_PRNW) {
- retval = mips32_pracc_exec_write(&ctx, address);
- if (retval != ERROR_OK)
- return retval;
- } else {
- /* Check to see if its reading at the debug vector. The first pass through
- * the module is always read at the vector, so the first one we allow. When
- * the second read from the vector occurs we are done and just exit. */
- if ((address == MIPS32_PRACC_TEXT) && (pass++))
- break;
+ /* Check for read or write access */
+ if (ejtag_info->pa_ctrl & EJTAG_CTRL_PRNW) { /* write/store access */
+ /* Check for pending store from a previous store instruction at dmseg */
+ if (store_pending == 0) {
+ LOG_DEBUG("unexpected write at address %x", ejtag_info->pa_addr);
+ if (code_count < 2) { /* allow for restart */
+ restart = 1;
+ continue;
+ } else
+ return ERROR_JTAG_DEVICE_ERROR;
+ } else {
+ /* check address */
+ if (ejtag_info->pa_addr < MIPS32_PRACC_PARAM_OUT || ejtag_info->pa_addr > max_store_addr) {
- retval = mips32_pracc_exec_read(&ctx, address);
+ LOG_DEBUG("writing at unexpected address %x", ejtag_info->pa_addr);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+ }
+ /* read data */
+ uint32_t data = 0;
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA);
+ retval = mips_ejtag_drscan_32(ejtag_info, &data);
if (retval != ERROR_OK)
return retval;
+
+ /* store data at param out, address based offset */
+ param_out[(ejtag_info->pa_addr - MIPS32_PRACC_PARAM_OUT) / 4] = data;
+ store_pending--;
+
+ } else { /* read/fetch access */
+ if (!final_check) { /* executing function code */
+ /* check address */
+ if (ejtag_info->pa_addr != (MIPS32_PRACC_TEXT + code_count * 4)) {
+ LOG_DEBUG("reading at unexpected address %x, expected %x",
+ ejtag_info->pa_addr, MIPS32_PRACC_TEXT + code_count * 4);
+
+ /* restart code execution only in some cases */
+ if (code_count == 1 && ejtag_info->pa_addr == MIPS32_PRACC_TEXT && restart_count == 0) {
+ LOG_DEBUG("restarting, without clean jump");
+ restart_count++;
+ code_count = 0;
+ continue;
+ } else if (code_count < 2) {
+ restart = 1;
+ continue;
+ }
+
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+ /* check for store instruction at dmseg */
+ uint32_t store_addr = ctx->pracc_list[ctx->max_code + code_count];
+ if (store_addr != 0) {
+ if (store_addr > max_store_addr)
+ max_store_addr = store_addr;
+ store_pending++;
+ }
+
+ instr = ctx->pracc_list[code_count++];
+ if (code_count == ctx->code_count) /* last instruction, start final check */
+ final_check = 1;
+
+ } else { /* final check after function code shifted out */
+ /* check address */
+ if (ejtag_info->pa_addr == MIPS32_PRACC_TEXT) {
+ if (!pass) { /* first pass through pracc text */
+ if (store_pending == 0) /* done, normal exit */
+ return ERROR_OK;
+ pass = 1; /* pracc text passed */
+ code_count = 0; /* restart code count */
+ } else {
+ LOG_DEBUG("unexpected second pass through pracc text");
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+ } else {
+ if (ejtag_info->pa_addr != (MIPS32_PRACC_TEXT + code_count * 4)) {
+ LOG_DEBUG("unexpected read address in final check: %x, expected: %x",
+ ejtag_info->pa_addr, MIPS32_PRACC_TEXT + code_count * 4);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+ }
+ if (!pass) {
+ if ((code_count - ctx->code_count) > 1) { /* allow max 2 instruction delay slot */
+ LOG_DEBUG("failed to jump back to pracc text");
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+ } else
+ if (code_count > 10) { /* enough, abandone */
+ LOG_DEBUG("execution abandoned, store pending: %d", store_pending);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+ instr = MIPS32_NOP; /* shift out NOPs instructions */
+ code_count++;
+ }
+
+ /* Send instruction out */
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA);
+ mips_ejtag_drscan_32_out(ejtag_info, instr);
}
+ /* finish processor access, let the processor eat! */
+ retval = mips32_pracc_finish(ejtag_info);
+ if (retval != ERROR_OK)
+ return retval;
- if (cycle == 0)
- break;
- }
+ if (instr == MIPS32_DRET) /* after leaving debug mode nothing to do */
+ return ERROR_OK;
- return ERROR_OK;
+ if (store_pending == 0 && pass) { /* store access done, but after passing pracc text */
+ LOG_DEBUG("warning: store access pass pracc text");
+ return ERROR_OK;
+ }
+ }
}
inline void pracc_queue_init(struct pracc_queue_info *ctx)
int mips32_pracc_queue_exec(struct mips_ejtag *ejtag_info, struct pracc_queue_info *ctx, uint32_t *buf)
{
if (ejtag_info->mode == 0)
- return mips32_pracc_exec(ejtag_info, ctx->code_count, ctx->pracc_list,
- ctx->store_count, buf, ctx->code_count - 1);
+ return mips32_pracc_exec(ejtag_info, ctx, buf);
union scan_in {
uint8_t scan_96[12];
projects / openocd / commitdiff