-Bacula - Windows Version Disclaimer\r
-===================================\r
-\r
-Please note, only the Win32 Client (File daemon) is supported. All the\r
-other components (Director, Storage daemon, their utilities) are provided\r
-on an "as is" basis. Unfortunately, they are neither properly tested, \r
-documented, or supported. This means that we cannot ensure that bug reports\r
-against the non-supported components will be fixed. For them to be supported, \r
-we need three things from the Open Source community:\r
-\r
-1. Full documentation of the Windows particularities of the Director,\r
- the Storage daemon, and their utilities in the Bacula manual.\r
-\r
-2. Someone to periodically and on demand run the regressions tests.\r
-\r
-3. One or more developers who are willing to accept and correct Windows\r
- related bugs as they occur.\r
-\r
-4. A certain Win32 community that will respond to user support questions\r
- on the bacula-users list. (This is probably already fullfilled). \r
- \r
-\r
-Bacula - Windows Version Notes\r
-==============================\r
-\r
-These notes highlight how the Windows version of Bacula differs from the \r
-other versions. It also provides any notes additional to the documentation.\r
-\r
-For detailed documentation on using, configuring and troubleshooting Bacula,\r
-please consult the installed documentation or the online documentation at\r
-http://www.bacula.org/?page=documentation.\r
-\r
-\r
-Start Menu Items\r
-----------------\r
-A number of menu items have been created in the Start menu under All Programs\r
-in the Bacula submenu. They may be selected to edit the configuration files,\r
-view the documentation or run one of the console or utility programs. The \r
-choices available will vary depending on the options you chose to install.\r
-\r
-\r
-File Locations\r
---------------\r
-The programs and documentation are installed in the directory \r
-"C:\Program Files\Bacula" unless a different directory was selected during\r
-installation. The configuration and other application data files are in the\r
-"C:\Documents and Settings\All Users\Application Data\Bacula" directory.\r
-\r
-Code Page Problems\r
--------------------\r
-Please note that Bacula expects the contents of the configuration files to be \r
-written in UTF-8 format. Some translations of "Application Data" have accented\r
-characters, and apparently the installer writes this translated data in the\r
-standard Windows code page coding. This occurs for the Working Directory, and \r
-when it happens the daemon will not start since Bacula cannot find the directory.\r
-The workaround is to manually edit the appropriate conf file and ensure that it\r
-is written out in UTF-8 format.\r
-\r
-The conf files can be edited with any UTF-8 compatible editor, or on most \r
-modern Win32 machines, you can edit them with notepad, then choose UTF-8\r
-output encoding before saving them.\r
-\r
-\r
-Storage and Director Services\r
------------------------------\r
-These services are still considered experimental in this release. Use of \r
-them should be approached with caution since they haven't received the\r
-same level of extensive usage and testing that the File service has \r
-received.\r
-\r
-Storage Device Names\r
---------------------\r
-There is a utility installed called scsilist.exe which displays the installed \r
-devices, their physical address and their device name. A link to it is \r
-created in the Bacula menu when the Storage service is installed.\r
-\r
-Changer and Tape device names in Windows are Changer0, Changer1, etc and \r
-Tape0, Tape1, etc. If there isn't a device driver loaded for the Changer \r
-then you need to use the address <Port>:<Bus>:<Target>:<Lun>. Port is the \r
-SCSI Adapter Number, Bus is the Bus Number on the adapter (usually 0 since \r
-most adapters only have one bus), Target is the device's Target Device ID, \r
-Lun is the Logical Unit Number.\r
- \r
-You must specify DeviceType = tape in the Device resource in bacula-sd.conf \r
-since auto detection of device type doesn't work at the present time.\r
+
+This newinstaller directory is not used or implemented
+
+
+
+Bacula - Windows Version Disclaimer
+===================================
+
+Please note, only the Win32 Client (File daemon) is supported. All the
+other components (Director, Storage daemon, their utilities) are provided
+on an "as is" basis. Unfortunately, they are neither properly tested,
+documented, or supported. This means that we cannot ensure that bug reports
+against the non-supported components will be fixed. For them to be supported,
+we need three things from the Open Source community:
+
+1. Full documentation of the Windows particularities of the Director,
+ the Storage daemon, and their utilities in the Bacula manual.
+
+2. Someone to periodically and on demand run the regressions tests.
+
+3. One or more developers who are willing to accept and correct Windows
+ related bugs as they occur.
+
+4. A certain Win32 community that will respond to user support questions
+ on the bacula-users list. (This is probably already fullfilled).
+
+
+Bacula - Windows Version Notes
+==============================
+
+These notes highlight how the Windows version of Bacula differs from the
+other versions. It also provides any notes additional to the documentation.
+
+For detailed documentation on using, configuring and troubleshooting Bacula,
+please consult the installed documentation or the online documentation at
+http://www.bacula.org/?page=documentation.
+
+
+Start Menu Items
+----------------
+A number of menu items have been created in the Start menu under All Programs
+in the Bacula submenu. They may be selected to edit the configuration files,
+view the documentation or run one of the console or utility programs. The
+choices available will vary depending on the options you chose to install.
+
+
+File Locations
+--------------
+The programs and documentation are installed in the directory
+"C:\Program Files\Bacula" unless a different directory was selected during
+installation. The configuration and other application data files are in the
+"C:\Documents and Settings\All Users\Application Data\Bacula" directory.
+
+Code Page Problems
+-------------------
+Please note that Bacula expects the contents of the configuration files to be
+written in UTF-8 format. Some translations of "Application Data" have accented
+characters, and apparently the installer writes this translated data in the
+standard Windows code page coding. This occurs for the Working Directory, and
+when it happens the daemon will not start since Bacula cannot find the directory.
+The workaround is to manually edit the appropriate conf file and ensure that it
+is written out in UTF-8 format.
+
+The conf files can be edited with any UTF-8 compatible editor, or on most
+modern Win32 machines, you can edit them with notepad, then choose UTF-8
+output encoding before saving them.
+
+
+Storage and Director Services
+-----------------------------
+These services are still considered experimental in this release. Use of
+them should be approached with caution since they haven't received the
+same level of extensive usage and testing that the File service has
+received.
+
+Storage Device Names
+--------------------
+There is a utility installed called scsilist.exe which displays the installed
+devices, their physical address and their device name. A link to it is
+created in the Bacula menu when the Storage service is installed.
+
+Changer and Tape device names in Windows are Changer0, Changer1, etc and
+Tape0, Tape1, etc. If there isn't a device driver loaded for the Changer
+then you need to use the address <Port>:<Bus>:<Target>:<Lun>. Port is the
+SCSI Adapter Number, Bus is the Bus Number on the adapter (usually 0 since
+most adapters only have one bus), Target is the device's Target Device ID,
+Lun is the Logical Unit Number.
+
+You must specify DeviceType = tape in the Device resource in bacula-sd.conf
+since auto detection of device type doesn't work at the present time.
;
; Kern Sibbald April 2009
; Correct some Win64 install problems
-;
-; Version $Id: winbacula.nsi 7074 2008-05-31 18:43:21Z kerns $
+; It is mind boggling how many lines of this insane scripting language
+; have been written with absolutely no comments
;
; Command line options:
;
StrCpy $ConfigMonitorName "$HostName-mon"
;StrCpy $ConfigMonitorPassword
+; PLUGINSDIR refers to temporary helper programs and not Bacula plugins!
InitPluginsDir
File "/oname=$PLUGINSDIR\openssl.exe" "${SRC_DIR}\openssl.exe"
File "/oname=$PLUGINSDIR\ssleay32-0.9.8.dll" "${SRC_DIR}\ssleay32-0.9.8.dll"
SetPluginUnload alwaysoff
+; Set client password
nsExec::Exec '"$PLUGINSDIR\openssl.exe" rand -base64 -out $PLUGINSDIR\pw.txt 33'
pop $R0
${If} $R0 = 0
SetPluginUnload manual
+; Set monitor password
nsExec::Exec '"$PLUGINSDIR\openssl.exe" rand -base64 -out $PLUGINSDIR\pw.txt 33'
pop $R0
${If} $R0 = 0
File "..\..\..\LICENSE"
Delete /REBOOTOK "$INSTDIR\License.txt"
+; Output a series of SED commands to configure the .conf file(s)
FileOpen $R1 $PLUGINSDIR\config.sed w
FileWrite $R1 "s;@VERSION@;${VERSION};g$\r$\n"
FileWrite $R1 "s;@DATE@;${__DATE__};g$\r$\n"
File "${SRC_DIR}\bacula-fd.exe"
- File "/oname=$PLUGINSDIR\bacula-fd.conf" "bacula-fd.conf.in"
+ File "/oname=$PLUGINSDIR\bacula-fd.conf" "bacula-fd.conf.in"
- StrCpy $0 "$INSTDIR"
- StrCpy $1 bacula-fd.conf
- Call ConfigEditAndCopy
+ StrCpy $0 "$INSTDIR"
+ StrCpy $1 bacula-fd.conf
+ Call ConfigEditAndCopy
StrCpy $0 bacula-fd
StrCpy $1 "File Service"
SectionEnd
+; Essentially deleted because wxconsole is not implemented on Win64
Section "Graphical Console" SecWxConsole
SectionIn 1 2 3
SetOutPath "$INSTDIR"
-; Call InstallCommonFiles
-;!if "${BUILD_TOOLS}" == "MinGW64"
-; File "${SRC_DIR}\wxbase28_gcc_bacula.dll"
-; File "${SRC_DIR}\wxmsw28_core_gcc_bacula.dll"
-;!endif
-
-; File "${SRC_DIR}\bwx-console.exe"
-
-; File "/oname=$PLUGINSDIR\bwx-console.conf" "bwx-console.conf.in"
-; StrCpy $0 "$INSTDIR"
-; StrCpy $1 bwx-console.conf
-; Call ConfigEditAndCopy
-
- ; Create Start Menu entry
-; CreateShortCut "$SMPROGRAMS\Bacula\bwx-console.lnk" "$INSTDIR\bwx-console.exe" '-c "$INSTDIR\bwx-console.conf"' "$INSTDIR\bwx-console.exe" 0
-; CreateShortCut "$SMPROGRAMS\Bacula\Configuration\Edit Graphical Console Configuration.lnk" "write.exe" '"$INSTDIR\bwx-console.conf"'
SectionEnd
SectionGroupEnd
LangString DESC_SecFileDaemon ${LANG_ENGLISH} "Install Bacula File Daemon on this system."
LangString DESC_SecConsole ${LANG_ENGLISH} "Install command console program on this system."
-;LangString DESC_SecWxConsole ${LANG_ENGLISH} "Install graphical console program on this system."
-;LangString DESC_SecDocPdf ${LANG_ENGLISH} "Install documentation in Acrobat format on this system."
-;LangString DESC_SecDocHtml ${LANG_ENGLISH} "Install documentation in HTML format on this system."
LangString TITLE_ConfigPage1 ${LANG_ENGLISH} "Configuration"
LangString SUBTITLE_ConfigPage1 ${LANG_ENGLISH} "Set installation configuration."
!InsertMacro MUI_FUNCTION_DESCRIPTION_BEGIN
!InsertMacro MUI_DESCRIPTION_TEXT ${SecFileDaemon} $(DESC_SecFileDaemon)
!InsertMacro MUI_DESCRIPTION_TEXT ${SecConsole} $(DESC_SecConsole)
-; !InsertMacro MUI_DESCRIPTION_TEXT ${SecWxConsole} $(DESC_SecWxConsole)
-; !InsertMacro MUI_DESCRIPTION_TEXT ${SecDocPdf} $(DESC_SecDocPdf)
-; !InsertMacro MUI_DESCRIPTION_TEXT ${SecDocHtml} $(DESC_SecDocHtml)
!InsertMacro MUI_FUNCTION_DESCRIPTION_END
; Uninstall section
${If} ${SectionIsSelected} ${SecConsole}
IntOp $R0 $R0 | ${ComponentTextConsole}
${EndIf}
-; ${If} ${SectionIsSelected} ${SecWxConsole}
-; IntOp $R0 $R0 | ${ComponentGUIConsole}
-; ${EndIf}
-; ${If} ${SectionIsSelected} ${SecDocPdf}
-; IntOp $R0 $R0 | ${ComponentPDFDocs}
-; ${EndIf}
-; ${If} ${SectionIsSelected} ${SecDocHtml}
-; IntOp $R0 $R0 | ${ComponentHTMLDocs}
-; ${EndIf}
Exch $R0
FunctionEnd
WriteINIStr "$PLUGINSDIR\WriteTemplates.ini" "Field 2" State 1
DeleteINIStr "$PLUGINSDIR\WriteTemplates.ini" "Field 2" Flags
WriteINIStr "$PLUGINSDIR\WriteTemplates.ini" "Field 3" State "C:\$ConfigClientName.conf"
-; WriteINIStr "$PLUGINSDIR\WriteTemplates.ini" "Field 5" Flags REQ_SAVE|FILE_EXPLORER|WARN_IF_EXIST
${EndIf}
!InsertMacro UnselectSection ${SecConsole}
!InsertMacro ClearSectionFlag ${SecConsole} ${SF_RO}
${EndIf}
-; IntOp $R1 $PreviousComponents & ${ComponentGUIConsole}
-; ${If} $R1 <> 0
-; !InsertMacro SelectSection ${SecWxConsole}
-; !InsertMacro SetSectionFlag ${SecWxConsole} ${SF_RO}
-; ${Else}
-; !InsertMacro UnselectSection ${SecWxConsole}
-; !InsertMacro ClearSectionFlag ${SecWxConsole} ${SF_RO}
-; ${EndIf}
-; IntOp $R1 $PreviousComponents & ${ComponentPDFDocs}
-; ${If} $R1 <> 0
-; !InsertMacro SelectSection ${SecDocPdf}
-; !InsertMacro SetSectionFlag ${SecDocPdf} ${SF_RO}
-; ${Else}
-; !InsertMacro UnselectSection ${SecDocPdf}
-; !InsertMacro ClearSectionFlag ${SecDocPdf} ${SF_RO}
-; ${EndIf}
-; IntOp $R1 $PreviousComponents & ${ComponentHTMLDocs}
-; ${If} $R1 <> 0
-; !InsertMacro SelectSection ${SecDocHtml}
-; !InsertMacro SetSectionFlag ${SecDocHtml} ${SF_RO}
-; ${Else}
-; !InsertMacro UnselectSection ${SecDocHtml}
-; !InsertMacro ClearSectionFlag ${SecDocHtml} ${SF_RO}
-; ${EndIf}
${EndIf}
FunctionEnd
${Else}
!InsertMacro ClearSectionFlag ${SecConsole} ${SF_BOLD}
${EndIf}
-; IntOp $R1 $NewComponents & ${ComponentGUIConsole}
-; ${If} $R1 <> 0
-; !InsertMacro SetSectionFlag ${SecWxConsole} ${SF_BOLD}
-; ${Else}
-; !InsertMacro ClearSectionFlag ${SecWxConsole} ${SF_BOLD}
-; ${EndIf}
-; IntOp $R1 $NewComponents & ${ComponentPDFDocs}
-; ${If} $R1 <> 0
-; !InsertMacro SetSectionFlag ${SecDocPdf} ${SF_BOLD}
-; ${Else}
-; !InsertMacro ClearSectionFlag ${SecDocPdf} ${SF_BOLD}
-; ${EndIf}
-; IntOp $R1 $NewComponents & ${ComponentHTMLDocs}
-; ${If} $R1 <> 0
-; !InsertMacro SetSectionFlag ${SecDocHtml} ${SF_BOLD}
-; ${Else}
-; !InsertMacro ClearSectionFlag ${SecDocHtml} ${SF_BOLD}
-; ${EndIf}
${EndIf}
GetDlgItem $R0 $HWNDPARENT 1
projects / bacula / bacula / commitdiff