General:
+Release Version 3.0.0:
05Apr09
kes Fix Win32 make clean to clean correctly
kes Cleanup Win installer dialog messages a bit ...
kes Store last block number written to tape in DEVICE and
use it for testing for correct last block on EOT.
-Release Version 2.4.0:
+28Dec08
+Release Version 2.4.4
+27Oct08
+Release Version 2.4.3
+26Jul08
+Release Version 2.4.2
+07Jul08
+Release Version 2.4.1
04Jun08
-kes Fix Win32 build.
-03Jun08
-kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
- This fixes bug #1095.
-31May08
-kes Add create_postgresql_database.sql to Win32 installer. Should
- fix problem reported by Juilio Monteiro.
-kes Get correct slot when auto unloading a device. This fixes bug
- #1086.
-30May08
-kes Fix multiple media restore.
-kes Make DEVICE Slot private and access it via a method.
- Allows better control over when it is set and cleared.
-kes Fix possible seg fault if SQL error.
-28May08
-kes Add Martin's fixes to argument scanning for the estimate
- command. This fixes bug #1093.
-kes Add debug code to SD.
-kes Fix renaming a Volume, which used the wrong Volume name.
-26May08
-kes If operator has rewind tape, print warning, release tape and
- try once more. If tape is positioned somewhere, something went
- wrong, so mark the tape in error and try once more. Previously
- this error was fatal, now it produces an error message.
-kes Ensure correct volume name displayed during restore
-kes Ensure that Volume is mounted for restore.
-25May08
-kes Fix a few more Coverity reported problems.
-24May08
-kes Apply Allan Black's status dir job count patch.
-ebl Add information about IMPORT/EXPORT slots in mtx-script.
-kes Enhance a couple of SD debug messages.
-kes Tweak unload flag setting and ensure it is set during swap.
-23May08
-ebl Fix #1091 about bad output in estimate command.
-21May08
-kes Modify autochanger locking to attempt to avoid race
- conditions.
-kes Make sure device not busy before doing label command.
-kes Display open() errors except when polling. Previously too
- many were suppressed. This should fix bug #1070.
-kes Fix Win32 reparse points. Bacula will not recurse into any
- reparse point directory, including mount points, unless the
- directory is explicitly mentioned at the top level (same as
- with Unix). A file that is linked to another file will be
- backed up -- much as Unix does for hardlinked files.
- This fixes bug #1041.
-20May08
-kes Remove double quotes from ChangeLog and ReleaseNotes
-kes Remove StorageId test when pruning and recycling (Eric's changes).
-kes Remove old form of locking when getting volumes -- causes deadlock.
-kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
- the name unique and to eliminate compile time error.
-kes Add accurate.o to Win32 FD Makefile
-19May08
-kes Fix cats dll build on Win32 after db_update_job_end_record
- calling sequence change.
-ebl Switch to tokyo dbm instead of htable in accurate code
-ebl Include tokyo dbm to bacula source tree
-17May08
-kes Fix buffer overruns detected by Coverity.
-13May08
-kes Tweak joblog display.
-12May08
-kes Implement --without-qwt
-kes Fix layout of restore tree dialog
-kes Add configure bat QWT libraries, so that bat can be built
- with or without the QWT libaries.
-11May08
-ebl Add dummy tape driver for regression tests.
-kes Make sure we unload the right slot when swapping.
-10May08
-kes Add debug times, reduce size of two-pool-changer test
-08May08
-ebl Tweak autoconf scripts for vtape
-07May08
-kes Improve SD reserve debug code.
-kes Testing an improvement to free up volumes no longer in use.
-03May08
-kes Rework SD acquire for read to handle autochanger Volume
- swapping.
-kes Implement regression that explicitly tests swapping a Volume
- from one drive to another.
-kes Enhance disk-changer to detect most error conditions.
-kes Fix SD code so that it properly swaps a Volume between drives.
- This fixes bug #1083.
-02May08
-kes Apply libdbi patch from Joao Freitas for regress and for
- Bacula trunk. Regress now works with libdbi. Nice.
-kes Apply .nobackup patch from bug #1077 submitted by
- Edwin Groothuis.
-kes Apply Bastian Friedrich's patch that adds %p to edit the pool
- name into jobs cloned via the run directive.
-01May08
-kes Prevent a Volume that is being swapped from being freed from
- the volume list. This will most likely fix, at least partially,
- bug #1083.
-kes Fix strippath so that it does not get a buffer overrun and crash FD.
- This fixes bug #1078.
-kes Remove 50 millisec wait in SD that broke debugger.
-ebl Add MaxRunSchedTime option that specifies the maximum allowed time
- that a job may run, counted from when the job was scheduled.
-ebl Fix MaxWaitTime option that specifies the maximum allowed time that
- a job may block waiting for a resource, counted from when the job starts
-ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
-kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
- that implements multiple commands per line in the console when using
- readline. Modify the default to use a semicolon as the command separator.
-28Apr08
-ebl Fix SQL query in migration code.
-ebl Make accurate mode with hash disk pass regression tests
-27Apr08
-ebl Implement first cut of accurate backup with hash disk.
-19Apr08
-kes Force unload of volume when wrong volume mounted in SD.
-17Apr08
-kes Fix bat seg fault at termination.
-kes Add Bacula generated version to bat about box.
-
-16Apr08
-kes Experiment with allowing multiple read jobs.
-kes Move final volume swapping code to DCR method and
- call it from acquire_for_read().
-kes When wrong volume is mounted during read, unload_autochanger.
-15Apr08
-kes Integrate the libdbi changes from Joao Henrique Freitas
-14Apr08
-kes Stop searching for Volumes in SD askdir if DIR returns the
- same volume name twice in a row.
-kes Close bat console windows first to eliminate error message
- from the notifier.
-13Apr08
-kes Tweak the swap Volume from one drive to another code so that
- it now seems to work.
-kes Resolve several problems with recycling that broke the new
- code (these problems are in 2.2.9 as well).
-kes Remove the volume lock when calling the sysop code.
-kes Don't mark a reserved volume with no writers as unused otherwise
- jobs fail.
-12Apr08
-kes Rework class structures for VOLRES, DCR, and DEVICE to make
- the method names a bit more logical, and for more logically
- handling the responsibilities.
-11Apr08
-kes Remove redundant code in terminating the scheduler that just
- causes a seg fault in many cases.
-kes Cleanup releasing a volume and make it a DCR method.
-kes Improve algorithm for detecting pre-reserved volume and
- swapping volumes.
-10Apr08
-kes Tweak volume swapping code so it works.
-kes Correct name overloading in mount.c
-kes Replace released flag in VOLRES with reserved and add access
- methods for the VOLRES class.
-kes Prevent volume from being released while being swapped.
-kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
- plugin that add %w (where) and %r (replace flag) editing to
- the plugin line.
-kes Apply Bastial Friedrich's edit pool=%p patch for run clone
- jobs.
-kes Refactor parts of stored/mount.c
-09Apr08
-ebl Add sanity checks for VolWriteTime and VolReadTime
-ebl Take care of bad clock changes while computing VolWriteTime
- and VolReadTime. This should fix or limit #1066
-kes Correct error string numbers in dird/catreq.c
-kes Restructure reserving, acquiring, and mounting volumes. Calls to
- autochanger are deferred for mount.c -- simplifes the code.
-08Apr08
-kes Do not prune any running job. It just fails the job.
-kes Lock the volumes when changing dev->reserved_device and marking
- the volume unused otherwise the device can get reserved by
- another job before the volume is released, thus blocking it.
-06Apr08
-kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
-kes Fix bug #1063, reuse of freed ptr in list nextvol.
-kes Release regex compile buffer in filed/job.c
-kes Add proper type of const char in sql_create.c
-kes Turn off debug in daemon termination routines
-kes Move free_volume_list() before devices are freed in stored.c
-kes Fix reference to uninitalized stack variables in bregex.c.
- This should correct bug #1067.
-04Apr08
-kes Fix possible seg fault in SD when freeing a volume entry.
-03Apr08
-kes Implement unload_dev() before swap device.
-ebl Add statistics prunning with option and menu
-kes Separate unload_dev() from unload_other_device() in autochanger.c
-02Apr08
-kes Apply patch from bug #1069 that corrects spurious error messages
- when ACLs enabled on SGI but no ACL exists.
-ebl Fix small segfault in bacula-sd when debug level is 500
-kes Modify run_program() and run_program_full_output() to use
- call by reference for the results string. This corrects a long
- standing problem where the address of the string may be changed
- in the subroutine but not in the calling program.
-01Apr08
-kes Re-enable code to remember last volume mounted on a non-tape
- Autochanger.
-kes Add patch supplied in bug #1068 that fixes a SD crash when using
- a Virtual autochanger.
-kes Generate correct JobMedia records during spooling/despooling when
- running concurrent jobs. Thanks to Tom Ivar Helbekkmo
- <tih@hamartun.priv.no> for excellent analysis and testing.
-31Mar08
-kes Tweak hash algorithm for htable using Martin Simmons idea
- for doing a circular shift.
-kes Remember what volume is in VTLs (previously turned off for
- testing).
-kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
- pointed out some problems in creating JobMedia records during
- spooling with concurrent jobs. Fix the problem by updating the
- start file position before despooling and generate a jobmedia
- record at the end of despooling.
-28Mar08
-kes Fix handling of JobMedia records during spooling and when a
- Volume is changed without actually writing data to the Volume.
-27Mar08
-kes Rework certain SD locking based on gdb tracebacks of deadlocks
- sent by Eric. This code now uses only the volume_lock() rather
- than the reservations lock when at EOM and acquiring a new
- volume.
-kes Ensure only one exit point in several subroutines.
-26Mar08
-kes Implement bsock code to permit locking. Use the new code in Verify
- in the FD to prevent the heartbeat thread from disrupting the Verify
- data sent to the Dir.
-kes Modify SD locking to eliminate locking the reservations system from
- outside the system. Use the volume lock when getting media data
- and reserving a new volume at end of media.
-kes Add Eric's volume_unused() fix to stored.c so that Volumes found
- when SD starts are not locked into place.
-24Mar08
-kes Fix error compiling runscript code on 64 bit machines.
-kes Tweak Win32 mount point code.
-kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
- cleared giving bad file estimate).
-kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
- 5 Million entries.
-22Mar08
-kes Keep Schedule run lists in order as suggested by
- Bastian Friedrich.
-21Mar08
-kes Implement autostart scripts for Debian.
-ebl Implement upgrade catalog scripts.
-20Mar08
-ebl Apply jobstat patch for long term statistics. Have to implement
- purge stats command and upgrade scripts.
-kes Fix mtx-changer.in for broken Debian mt program.
-19Mar08
-kes Fix large number of JobMedia records reported by Eric Bollengier.
-18Mar08
-kes Apply doc fix from bug #1062.
-kes Resolve crash and improper restore wx-console Win32 restore
- GUI. Fixes bug #1065.
-kes Update Win32 wxWidgets to latest version.
-kes Attempt to do correct handling of Win32 mount points. Should
- fix bug #1046.
-kes Fix Win32 FD backup/restore memory leak due to improper termination
- of BackupRead/Write. This fixes bug# 1038.
-16Mar08
-ebl Reduce memory usage for accurate backup, working only with ctime
- and mtime. (not all Lstat field)
- About 40MB for my Linux system (400.000 files)
-14Mar08
-kes Add dcr->reserved_volume flag that allows us to release a volume
- even if it is not vol->released. This allows maxvol2 to work when
- Volumes expire and we are already writing to the device (i.e. a
- volume is pulled out from under us by another job terminating after
- we reserve the drive).
-13Mar08
-ebl Permit multiple command/console per runscript definition.
- RunScript { command = /bin/true ; command = /bin/false ... }
-ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
- (restart an application) just after the VSS snapshot on windows.
-kes Don't zap dcr values during release_volume() as they might
- have the next Volume to be mounted.
-kes Fix AIX prototype.
-12Mar08
-kes Second cut of drive switching during backup.
-11Mar08
-kes Fix Win32 build.
-kes Update Win32 version of wxWidgets to most recent version.
-kes Tweak Copy job details.
-kes Rework dir_find_next_appendable_volume to make a bit more effort
- to find a suitable volume before giving up.
-10Mar08
-kes Make ask_sysop_to_create... to return if waken from wait.
- This helps get out of blocked conditions.
-kes Experimental implementation of switch_device in reservations.
-kes Implement FD version to allow easier protocol changes.
-kes Add Plugin Options string -- not yet passed to FD.
-kes Implement PluginOptions ACL.
-09Mar08
-kes Attempt to correct problems with restores with autochangers and
- use counts going negative
-kes Rework SD status command and implement API for bat. Implements
- header, runing waitreservation, devices, volumes, spooling,
- and terminated status keywords.
- .status storage=xxx <keyword>
-kes Clarify TLS error message by adding double quotes around name.
-kes Simplify SD/FD status code by putting api flag in STATUS_PKT
-kes Pass jcr to tls routines so debug messages can be handled better.
-kes Rework jobq resource allocation code, and possibly fix a bug
- that caused reference counts to get out of sync.
-08Mar08
-kes Rename fd/dir plugin to use Bacula standard underscore.
-kes Plugin work -- bring dir up to fd level.
-kes Start implementation of VTL code
-kes Fix Win32 build after adding new cats subroutine.
-06Mar08
-kes First cut at Duplicate Job implementation.
-05Mar08
-kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
-kes Start PluginOptions string, and refactor a bit of ua_run.c
-ebl Apply Allan patch that permit to reset recyclepool.
-04Mar08
-kes Test patch -- possible fix or improvement for bug #1053
-kes Refactor FD and SD status commands to permit new API code in
- SD, and to fix Win32 build.
-kes Win32 build is now working.
-03Mar08
-kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
- some ideas in patch from Scott Bailey.
-kes Begin implementation of duplicate Job control.
-kes Fix some of Win32 build after recent additions.
-kes Apply patch from Frank Kardel that implements 'honor no dump flag',
- which causes the FD to detect whether or not the OS has the
- honor no dump bit (*BSD systems), and if so, to skip backing up
- any file with this bit set. The feature is enabled by setting
- 'honor no dump flag = yes' in the Options section of a FileSet.
-28Feb08
-kes Correct po warning message with datarootdir
-kes Implement more code in dird.c to put configuration parsing in
- a class rather than use globals.
-kes Restructure SD status command for implementation of bat API
- interface.
-27Feb08
-kes Suppress incorrect 'Will not descend from x into y' messages.
-kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
- daemon globals used by parser.
-kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
-26Feb08
-kes Fix free of plugin_list when none exists.
-25Feb08
-ebl Apply accurate project patch.
-24Feb08
-ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
- on non-mempool object)
-kes First cut of converting FD .status to work with bat API.
- New form is:
- .status client=XXX header
- .status client=XXX running
- .status client=XXX terminated
-kes Implement first cut of Copy Job.
-kes Implement Catalog in Pool resource. It overrides catalog specified
- in the Client resource.
-22Feb08
-kes Apply patch (with some difficulties) from Joao Henrique Freitas
- <joaohf@gmail.com>, which adds support for libdbi as a Bacula
- database driver.
-kes Add patch from Martin Schmid scm@apsag.com that checks to see if
- ftruncate() actually works. In the case of some (cheap) NAS devices,
- it does not, and so recycling NAS Volumes does not work. The code
- simply unlink()s the file, then recreates it. This fixes bug #1011.
-21Feb08
-kes First incomplete cut of big malloc blocks for htable.
-kes Tweak plugin code.
-17Feb08
-kes Plugin debug code + tweak a couple bat dialog layouts
-14Feb08
-kes Fix creating first JobMedia record during Migration to include
- proper index. This caused slow restores of migrated jobs.
-kes Temp fix to plugin name file_index.
-kes Bacula backed up and restored a MySQL database.
-13Feb08
-kes Implement plugin restore.
-kes Implement parsing of db_driver to give db_type index.
-10Feb08
-kes First cut of plugin restore code.
-kes Fix bug #1047, which had a heap overrun when stripping certain paths,
- and do not strip paths on symbolic links.
-kes Set catalog backup database and user name from values specified on
- the ./configure line.
-ebl Fix #1031 about wrong pool source information in job report.
-09Feb08
-kes Fix Win32 build.
-kes Remove a redundant jcr argument to find_files, match_files, and
- find_one_file.
-kes Implement '.status dir header|scheduled|running|terminated' that
- prints the requested status section. With the exception of the
- header, the other reports have fields separated by tabs (\t).
-08Feb08
-kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
- a resource embedded run command to find a since time if no explicit
- since time was supplied on the command line.
-kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
- that updates the state file at job termination time in addition to
- when the daemon terminates.
-05Feb08
-kes First version where a plugin did a backup.
- bpipe-fd.so created a backup file, wrote a test
- string to it, and Bacua could restore this fabricated file.
-02Feb08
-kes Implement DB Driver = string for the DBI driver.
-kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
-kes First cut of code for loading Win32 plugin dlls. Implement
- dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
- and implement a dlfcn.h file based on opengroup's definitions of
- the functions.
-01Feb08
-kes First cut plugin directives.
-30Jan08
-kes Apply patch from bug #1049 to prevent stripping the path on a
- symlink.
-kes Attempt to fix bug #1047 where stripping a path corrupts the
- heap. Waiting for feedback.
-kes Correct the Mount message not to suggest labeling a new tape
- when doing a restore. Submitted by email by John Stoffel.
-kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
- FD by using casting. Reported in bug #1042.
-28Jan08
-kes A bit of crypto cleanup. More later.
-
-Release Version 2.2.8
+Release Version 2.4.0
25Jan08
-kes Apply patch from Martin to correct bug #1040, bscan sets existing
- ClientId to zero.
-kes Fixed important spelling error in doc -- bug #1045.
-23Jan08
-ebl Fix bextract to be able to extract non-portable Win32 data to
- Unix/Linux clients
-kes Move initialization of read/write res lock earlier in the code.
- This fixes the crash with a null conf file. This fixes bug
- #1030.
-kes Redefine CURES in lib/parse_conf to be URES and move it all
- into lib/parse_conf.c -- this responds to bug #1042, but does
- not fix it. The fix is not to compile with FORTIFY_SOURCE.
-kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
- the trunk SVN. I don't think this was reported as a bug.
-17Jan08
-ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
-12Jan08
-kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
-10Jan08
-kes Add DataDespooling and DataCommitting status (committing is
- the last despooling).
-kes Finish implementation of new reservations code noted below.
-08Jan08
-kes Fix bsnprintf for float point numbers. I broke recently when
- parameterizing some variables. This fixes bug #1036.
-kes Undo recent reservations changes ... will apply them later
- when they work better.
-06Jan08
-ebl Fixes #1034 which cause mysql to hang the connection after 8h
-ebl Change default statistics target of filename.name and path.path
- fields for PostgreSQL. This speeds lookup by indexes. Thanks
- to Marc Cousin.
-kes A few more tweaks to new reservation code. Make sure to clear
- vol released flag when retaking volume. When reading label and
- label is bad mark volume unused. When recycling, mark volume
- unused so it can be renamed.
-05Jan08
-kes Fix reserve_volume() so it doesn't release a volume in use
- (i.e. a volume entry not marked released). This should be
- the last part needed to fix bug #1018.
-03Jan08
-kes Move Heartbeat documentation from Job to Director resource.
- This fixes bug #1033.
-02Jan08
-kes Fix existing switch drive SD code to call autochanger to release
- any old volume. This must be done to keep the autochanger from
- releasing subsequently newly reserved volumes in doing a close().
- This should fix bug #1018.
-kes Fail if attempting to get console input in batch mode. This
- should help fail RunScript console commands that are incomplete.
-kes First cut implementing switch_drive() in SD (not actually called).
-31Dec07
-kes Implement first cut running console commands in a RunScript.
-29Dec07
-ebl Fixes bug #1028 where 'Selection Type' option was not usable
- with JobDefs.
-ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
- output in error.
-
-Release Version 2.2.7
-24Dec07
-kes Add new free_tls() entry point so that Win32 builds.
-kes Fix compile warning in src/lib/util.c
-kes Fix entry point for edit_job_codes() so that Win32 builds.
-kes Fix seg fault Frank Sweetser reports in regression testing
- on his systems. The problem was that the original author of
- bsnprintf.c did not take into account the side effects of
- using ++x in the argument to a #define.
-kes Make SD protocol backward compatible with version 2.2.x.
-19Dec07
-ebl Fixes bug #1015 where bacula failed to restore acl to a socket
- because Bacula no longer restores sockets.
-ebl Always use ignorecase fileset option on win32 FD.
-14Dec07
-kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
- that implements double quoting include names in conf files,
- and also allows piping input by having the first character
- be a vertical bar (|).
-kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
- that implement %f in RunScripts to pass the FileSet name.
-kes Skip leading | when lex input comes from a pipe as suggested
- by Michael Stapelberg <michael@stapelberg.de>.
-13Dec07
-kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
- Nerijus Baliunas <nerijus@users.sourceforge.net>
-12Dec07
-kes Implement Plugin Directory and plugin events.
-11Dec07
-kes Implement a security enhancement: TLS authentication but no
- encryption. Enabled by setting 'TLS Authentication = yes'.
- Note when this is on, TLS encryption is turned OFF!
-10Dec07
-kes This patch corrects a problem where the maximum concurrent storage
- jobs counter gets out of sync during restore jobs causing jobs to
- 'wait on max Storage jobs'. This patch fixes bug #1009.
-03Dec07
-kes This patch fixes bcopy so that it produces correct Volumes.
- It fixes bug #1022.
-kes This patch eliminates spurious output to the console during a VerifyVolume
- job that contains encrypted data. It fixes bug #1024.
-02Dec07
-kes This patch prevents the 'status dir' command from trying to use a scratch
- volume and possibly moving it from one pool to another. This patch fixes
- bug #1019.
-01Dec07
-kes Add new include to postgresql.c suggested by Marc Cousins so
- that it compiles correctly with pgre version 8.3.
-30Nov07
-kes Fix --archivedir addition to configure. Replace it with
- --with-archivedir in configure.in This fixes the regression
- test builds.
-kes This patch fixes bug #1012 where the job is canceled because
- of Max Run Time exceeded when the job has not yet started.
-29Nov07
-ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
- one 'part' to write. Instead of each part being stored on disk,
- written to DVD, then deleted from disk, all parts are written to disk,
- and only the last is written and deleted from disk.
-kes This patch fixes the status command to include the formating string for
- JS_AttrInsterting. It fixes bug #1021.
-kes This patch should fix the Mac OS X build problem on the latest
- Darwin, where sys/types.h was not included correctly (apparently
- due to a change in the Mac headers). The solution was to explicitly
- ensure that it is defined for the ./configure.
- This patch also has a rebuild of configure that includes the Debian
- qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
-kes This patch should ensure that queued messages to the console are
- displayed as soon as possible. It should fix bug 1007, but has been
- reported not to work.
-14Nov07
-kes This patch fixes the infinite loop when trying to increase the
- maximum number of volumes in a Pool during the add command.
- This patch fixes bug #1008.
-
-Release Version 2.2.6
-09Nov07
-db Remove extra data on estimate command in joblist for bat.
-04Nov07
-kes Cleanup of code in SD that sets the LastWritten date. This doesn't
- really change anything, but is the beginning of doing it *right*.
- To do it completely right the LastWritten date must be passed to
- the SD, but it is not yet done.
-kes Minor tweaks to some bat restore SQL.
-kes This patch fixes bug #1003 where putting the message output from
- a Verify job into the catalog results in a recursive loop. The problem
- seems to show up only with postgresql (to be verified).
-kes Correct %x to %p in postgresql debug statement.
-02Nov07
-kes Fix bug #942 where lots of emails where generated when the heartbeat
- interval was low and Bacula wanted a different tape from the one in
- the drive.
-25Oct07
-ebl Add new SD despooling attributes and Dir inserting attributes
- job status codes in the catalog (Status table).
-24Oct07
-ebl Use qmake-qt4 instead of qmake when available (debian system).
-22Oct07
-kes Add a security warning to src/cats/make_catalog_backup.in indicating
- that passing the password via the command line (arg 3) is insecure.
- This responds to bug #990 (it doesn't fix it).
-19Oct07
-kes Set default debug_level to zero. This corrects bugs #991 and #993.
-kes Fix a crash in bat when it cannot connect to the Director for example
- if the Director is not running.
-kes Remove redundant INDEX (JobId) from File table in the trunk.
- This fixes bug #992.
-kes Make explicit exception to GPL in LICENSE to permit linking
- the Win32 FD with Microsoft VSS code.
-kes Apply the Solaris package patch from
- Masopust, Christian <christian.masopust@siemens.com>
-kes Apply the patch to optionally add a timestamp in the debug output
- submitted by Mariusz Czulada <manieq@wp.eu>.
-18Oct07
-ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
- backend (sql_strerror). Fixes bug #989
-16Oct07
-kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
- It applied with no problems.
-kes Add PATH command to SunOS part of mtx-changer.in so that sed and
- awk are on the path.
-kes Redirect stderror to stdin on mt status command in mtx-changer.in
- since the status is returned on stderr on Solaris.
-kes Activate Close button on tray-monitor window. This fixes
- bug #986.
-kes Check for NULL item in parse_conf.c before calling it. In the
- case of Device, there is no item and this caused a seg fault when
- Device appears in the conf file.
-kes Add a #define __CONFIG_H when including config.h in bacula.h. This
- avoids pulling in config.h multiple times in some new code.
-12Oct07
-kes Fix spurious warning message printed when creating a volume with
- a LabelFormat. This fixes bug #976.
-
-Release Version 2.2.5
-09Oct07
-kes Add JobId in place of Job name in all the Jmsg() output.
-kes Correct the APP_DESC for the Win32 storage service (remove an e).
-07Oct07
-kes Make maxvol-test and new more strict maxvol2-test work.
-kes Print JobId in all Jmsg() job output.
-06Oct07
-kes Add new SD despooling attributes and Dir inserting attributes
- job status codes. This fixes bug 961.
-kes Fix Win32 drive display in bat version browser. Fixes bug #962.
-05Oct07
-kes Fix doc issue. This fixes bug #963.
-kes Fix listing performance problems in bat. Pointed out by
- Chris Howells.
-kes Remove old debug code.
-kes Fix bat code that tests for Win32. This should fix bug #968
-kes Query 5 list wrong Vol after migration. This fixes bug #960
-04Oct07
-ebl Fix #969 where user can't change Replace option in restore menu.
-5ASep07
-kes Save jcr in thread specific data (tsd) for each thread.
-kes Make Dmsg() print JobId as -%u.
-kes Make Jmsg, Emsg, and others automatically pickup the jobid
- for the thread if it exists.
-kes Remove old reservation debug jid code.
-kes Remove get_jcr_from_tid() from OpenSSL and tls code.
-ebl Add an option that permit to specify spool size in job
- definition. (Applying patches/testing/spoolsize_per_job.patch).
- You must upgrade SD and DIR at the same time.
-dvl Add new configuration item --archivedir
-dvl Adjust regression tests to use tmp not /tmp. This will allow
- multiple concurrent runs of the regression tests.
-28Sep07
-kes Fix race condition that drops final block written to volume.
- This happens in rare cases with multiple simultaneous jobs
- when the Volume fills. This fixes bug #964. May be related
- to bug #935 and possibly #903.
-kes Eliminate more strerror() and replace with bstrerror().
-kes Remove BSD getopt and replace with unrestricted IBM version.
-kes Fix Win32 build for changed calling sequences.
-kes More tweaks to the mount volume routines to get everything
- right. Changed variable name from find to have_vol, which is
- much easier to understand.
-kes Enhance btimer debug code.
-27Sep07
-kes Fix FD->SD authorization failure, which was due to spurious
- wakeups from a pthread_cond_timedwait(). Simply check the
- predicate before continuing. This fixes bug #953.
-kes Add const char where needed (more to do). Remove temp debug code.
-26Sep07
-kes Setup SQLite busy handler before doing queries. Fixes bug #967.
-kes Don't overwrite error message in check_tables_version.
- Fixes bug #966.
-kes Unlock batch insert tables with same calls used elsewhere.
-kes Allow starting 59 jobs a second.
-kes Make SD session key more random.
-kes Add retry for SQLite opening db if it fails. Probably helps
- for bug #967.
-kes Suppress extra error messages during batch insert failure.
- Fixes bug #966.
-kes Add jcr to timer packets so if killed message can be sent to job.
-kes Add JobId to all Dmsg() output.
-kes Put some FD auth code on dbglvl rather than fixed.
-kes Return insert attributes error message in db msg buffer to avoid
- false error messages. Helps fix bug #966.
-kes Separate batch init error messages. Probably helps fix bug #966.
-kes Make SD code that contructs attribute insert check string lengths
- more carefully.
-kes If Dir gets an error during inserting attributes, cancel SD.
- This reduces unnecessary error messages.
-24Sep07
-kes Correct search boolean for getting Volume info
-ebl Cleanup batch insert code. Probably fixes bug #965.
-kes Back out one small change to the reservation system (reserving a volume).
-kes Rework how a Volume is mounted. It is now much more intelligent and
- will always attempt to use any mounted volume if possible and reduces
- calls to the Director asking about volumes.
-23Sep07
-kes Turn off some code when batch insert not enabled.
-kes Edit FD name in connect error messages.
-kes Rework the reservation system to take into account that the Director
- might give us a Volume that is different from the current one being
- used, and to ensure that we don't exceed Maximum Volume Jobs.
- This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
- fatal error with multiple jobs running'
-kes Add more debug code in reservation system.
-kes Implement maxvol-test to check bug #947.
-22Sep07
-kes Add code to handle tray monitor separated from Win32 FD.
-kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
-20Sep07
-kes Add missed return in fixing verify bug -- trunk only.
-ebl Fix a command parser issue causing a director segfault.
-kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
- This fixes bug #954.
-kes Increase the max block size to 4MB fixes bug #957.
-kes ERABT if user sets min block size > max block size. Fixes bug #956.
-kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
- is not properly mounted (recognized) during a poll.
-kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
- Job that has differences reports Verify OK.
-ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
-17Sep07
-ebl Add an option to operate on all pools with update vol parameters.
- This complete the project 20. Patch from Nigel Stepp.
-ebl Add history support to bconsole when using readline.
- Using Ctrl-D to exit doesn't update .bconsole_history
-kes Modify new volume algorithm to use max MediaId for generating next
- volume number rather than the count of Volumes. This should essentially
- eliminate the failure rate if some volumes were deleted. Bug #921.
-kes Begin implemention of Optimize Job Scheduling.
-kes Implement restore callback that Dirk and I agreed on for bat
- restore. This fixes bug #928. Restore of backup of zero files fails.
-kes Fix SQL Catalog logging which broke with new db_escape_string
- calling sequence.
-
-Release Version 2.2.4
-14Sep07
-kes Fix bacula_cats.def for new db_escape_string().
-kes Increase size of name string when FD making connection to SD.
- May fix bug #953. FD->SD connection failure.
-13Sep07
-kes Add code to help Dan debug 2drive-incremental-2disk test.
-kes Add code to try to fix bug #908.
-kes Add waits to multiple exit detection code to try to force pid
- file to always be deleted.
-kes Restore good dev.tar.gz to rescue set appropriate binary property.
- This fixes bug #950.
-kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
- trying to switch drives by checking for blocking before unblocking.
- Fixes bug #906.
-kes Cancel storage daemon in all cases where FD reports error. This
- should fix virtually all cases of bug #920.
-kes Fix db_escape_string() for MySQL which did not compile.
-12Sep07
-kes Fix error message that was clobbered when Dir tells SD it does not
- have write permission on Volume. This should fix a minor point
- in bug #942, but not the main problem.
-kes Add code to cancel job in SD if FD connection fails. This should
- fix bug #920.
-kes Add code in FD exit to prevent loops and a crash on FreeBSD.
-dvl Pass jcr and db into db_escape_string() to enable better escaping
- of strings
-kes Fix migration code to get correct Volume name with multiple volumes
- by skipping |. Fixes bug #936.
-kes Implement patch supplied by Landon to fix bug #944 where using
- TLS with bconsole uses 99+% of the CPU.
-kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
- program.
-kes Move patches into patches directory.
-11Sep07
-ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
- as expected.
-09Sep07
-ebl Using 'm' in bconsole will show messages like before,
- and not memory usage.
-kes Fix bug #935, and probably also bug #903 where files were not
- restored. MediaId was not properly set in JobMedia record after
- a Volume change.
-08Sep07
-kes Suppress chown and chmod error messages if the FD is not running
- as root.
-07Sep07
-kes Apply Martin Simmons' patch that should turn off the new API usage
- when batch insert is turned off allowing building on older
- PostgreSQLs.
-kes Add ./configure search in qwt-qt4 for qwt package
-05Sep07
-kes Bacula is now free of 3rd party GPL copyrighted code!
-kes Remove idcache.c
-kes Add guid_to_name.c/h which replace idcache.
-kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
-04Sep07
-ebl Detect if new PosgreSQL batch insert API is present.
-kes Correct incorrect mempool call causing Director crash. Occurs on
- systems without va_copy().
-sb Update spec files for 2.2.1 release
-03Sep07
-kes Fix memory pool call in ua_output.c. bug #934.
-kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
- Add test program to fnmatch.c
-02Sep07
-kes Integrate patch to README.vc8 from
- Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
- edit it to get it into Unix patch format.
-kes Implement mkpath.c to replace old FSF makepath.c
-01Sep07
-kes Implement savecwd.h and savecwd.c. Remove FSF versions.
-
-Release Version 2.2.1
-30Aug07
-kes Update POTFILES.in
-kes Cleanup a few underquoted AC_DEFUNs in configure
-kes Apply patch from Martin Simmons that adds a test for va_copy to
- ./configure
-29Aug07
-kes Fix bug #921 by increasing the number of tries to create a new volume
- from 11 to 100.
-kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
- can be called multiple times. Implement a version for machines
- without va_copy() that gets a big buffer.
-25Aug07
-kes Integrate more portable zone offset code into bsmtp.c
- Submitted by Attila Fülöp.
-24Aug07
-kes Fix bad SD->FD return status reported by
- (James Harper) <james.harper@bendigoit.com.au>
-ebl Fix a bug in read_close_session which return random status
- thanks to James Harper
-23Aug07
-kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
- and directory names during restore of single file/directories.
-kes Add sanity checks to .sql command when string is empty. Hopefully
- that will resolve Dirks Director crash.
-22Aug07
-kes Apply patch submitted by Martin Simmons that corrects a seg fault
- in the bsmtp chat subroutine when debug is >= 10.
-21Aug07
-kes Fix Director crash when running bat SQL queries.
-kes Add David's notes on Item 8: Copy pools.
-18Aug07
-kes Rework projects file to be current and ready for a vote.
-kes Enhance lex scanner error message.
-17Aug07
-kes Tweak LICENSE file to mention BSD code.
-kes Fix bat.pro.in so that it includes the OpenSSL libraries only
- if specified on the ./configure.
-kes Add first (not yet tested) cut of bcomm to the qt-console directory.
- This class is intended to allow us to open a second bsock to the
- Director while in the restore subdialog.
-16Aug07
-kes Fix configure to create bat Makefile before creating dependencies.
-kes Eliminate the egg files from the tray-monitor. Use gtk calls.
-kes Add a tooltip to the tray monitor.
-dvl Set the Director's PID file before dropping privs. This fixes
- bug #923.
-15Aug07
-kes Update AUTHORs file
-kes Increase the default max concurrent jobs to 20 in FD and SD to
- correspond with the default .conf files.
-kes Rewrite the Win32 service routines. This eliminates the 3 copies
- some different, of the same file created by RN when porting the
- Win32 SD and Dir.
-kes Rearrange some of the Win32 directories and the placement of the files
- in them.
-kes Set DEVELOPER flag in version.h
-
-========================================================================
-Release Version 2.2.0
-09Aug07
-kes Apply a second doc patch from Marc.
-kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
- improves the tips section that discusses how to setup multiple
- simultaneous jobs.
-08Aug07
-kes Update bat README file.
-kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
- corrects a typo in the Recycle status check in db_find_next_volume().
- This will probably fix a number of annoying problems with multiple
- Recycled volumes.
-kes Modify most of dird/msgchan.c to use bsock class calls rather than
- bnet calls -- no functionality change.
-07Aug07
-kes Modify the Verify output to specify if files are missing on
- the Volume(s) or disk. Fixes confusion in bug #916.
-kes When more than one Volume is read in a migration job, the last
- Volume bytes reported are from the last read volume rather than
- the last written volume. Fixed. This fixes bug #910.
-kes Fix display of Recycle flag after update volume=foo recycle=yes.
- It previously printed New Recyle flag is: no. This fixes bug
- #917.
-06Aug07
-kes Correct seg fault when switching tape drives during restore.
-kes Commit uid_gid_name.c (replacement for idcache.c), but will not
- be used until after 2.2.0 release.
-04Aug07
-kes Remove fnmatch() in SD that permitted wild card specifications.
- This fixes bug #914.
-31Jul07
-kes Fix %g in filename returned by SQL for browse tree reported by
- Dirk.
-kes Fix configure so that it puts config.out in the cwd rather than
- in src/qt-console
-kes Attempt to fix the locking problem reported by Eric in bug #906.
-kes Make berrno class to leave errno unchanged after constructor call.
-kes Make bnet_server use the heap rather than the stack to allocate
- its socket fd pointers to avoid a crash at termination. Problem
- reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
-30Jul07
-kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
- and putting it in depkgs-qt along with Qt4.3.
-29Jul07
-kes Rework code in acquire.c that switches drives for reading when
- the Media Type does not match. This should fix bug #906
-28Jul07
-ebl Fix a director segfault during job setup #907
-kes Correct seg fault in postgresql when first operation returns no
- rows. Fixes Dirks File browser problem seg fault with bat.
-25Jul07
-kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
- building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
- 2.6 as well).
-24Jul07
-kes Implement PopUp YES/NO dialog for bat.
-23Jul07
-ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
-22Jul07
-kes Correct RunScript to terminate job in FD on failure.
-kes Change abort_on_error and AbortJobOnError to fail_on_error
- and FailJobOnError in RunScripts.
-kes Minor tweaks of code formating in RunScripts, principally to
- avoid depassing 80 columns.
-21Jul07
-kes Eliminate one #ifdef Win32 in bsmtp
-kes Implement grow tool to grow a file for testing very large databases.
-kes Add big-vol-test to test Bacula seeking with > 5GB.
-Release 2.1.28 beta
-19Jul07
-kes Modify find_next_volume() to return all values in Media record.
-kes Ensure that we keep Recycle Pool when moving Scratch volumes.
-
-Release 2.1.28 beta
-18Jul07
-kes Update Release notes
-17Jul07
-ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
- Warning, in previous beta version, all media get from scratch keep their
- old retention.
-16Jul07
-kes Tweaked Win32 installer to remove temp conf files at uninstall time.
- This should fix bug #842. Made a note to look at removing the temp
- files at the end of the install.
-kes Add ability to mount and unmount a file device providing it is
- marked as being removable and has the appropriate mount and unmount
- commands defined in the Device resource. This fixes bug #830.
-kes When applying a storage override, release all previous storage
- definitions rather than just prepending the new storage.
- This should prevent a good deal of confusion.
-14Jul07
-kes Implement ./configure search for qwt libraries.
-13Jul07
-kes Disable posting the WM_CLOSE message in KillRunningCopy of the
- Win32 FD. This should fix bug #893.
-kes Remove an unnecessary beep in Win32 init code.
-kes Update copyright dates in Win32 executable about boxes.
-kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
- code with a BSD getopt.c and getopt.h.
-kes Remove sched.h from the Win32 compat directory -- not used.
-kes Remove the Exit menu item from the Win32 tray monitor. If you really
- need to shut it down, do it through the services panel or the command
- line.
-kes Remove some inappropriate Bacula FSFE copyrights.
-ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
-kes Fix regress config non-portable test as pointed out by
- Florian Heigl <florian.heigl@gmail.com>
-kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
- as pointed out by Florian Heigl <florian.heigl@gmail.com>
-12Jul07
-kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
- Reported by Frank Sweetser.
-
-Release 2.1.26 beta
-12Jul07
-kes Fix client-only build.
-kes Integrate client-only fixes for bsys (initgroups) and conio from
- Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
-kes Make arguments to get_scratch_volume() in same order as other
- such calls.
-kes Rework the prune_volumes() subroutine so that after purging and
- no volume found in desired pool, it will check for a scratch
- volume. This prevents recycling the whole scratch pool.
-kes Add code to status storage to print boffset_t (largefile support).
-11Jul07
-kes Move qwt (Graphics libarary for Qt4) to depkgs.
-kes You now need a --with-qwt=<dir> to be able to build bat.
-kes Update src/win32/cats/bacula_cats.def to include the new
- db_get_query_dbids() call on Win32.
-07Jul07
-kes Correct a problem when selecting a scratch volume and moving
- it to another pool that lost some columns.
-kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
-kes Enhance Autochanger error messages to include Volume and device name.
-kes Rework prune_volumes() code to take account of InChanger flag,
- and to handle recycling volumes going to the Scratch pool and
- current pool because the RecyclePool directive.
-kes Implement a better and more efficient db_get_query_dbids() to
- handle creating and passing back a list of DBIds.
-
-Release 2.1.24 beta
-03Jul07
-kes Start work on new more efficient DBId subroutine. First use
- will be for recycling volume to Scratch inchanger.
-kes Increase number of JobIds in pruning from 1000 to 10000.
- This to be replaced by above routine.
-kes Begin implementation of building Qt4 on Win32.
-kes Correct typo in fix I added for bad TLS shutdown.
-kes Pull 2.0.3 patches into patches directory.
-kes Update Release notes. Include qt-console in line count.
-kes Update Projects file.
-30Jun07
-kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
- bug in migration code where a job that spanned two volumes
- was migrated twice.
-29Jun07
-kes Implement new BST_DESPOOLING blocked state. Change from locking
- during despooling in SD to blocking. This means that other threads
- can work with the device structure, in particular the reservations
- system while despooling.
-28Jun07
-kes Fix return in reservation message queue that missed clearing
- the jcr lock (implemented 26Jun07 below).
-kes Rename a number of dev methods to make locking function names
- a bit clearer.
-kes Document locking in lock.c. Move lock structures to new file
- lock.h.
-26Jun07
-kes Move reservations message lock to lock jcr only this
- fixes bug #861.
-kes Move main SD locking code into lock.c (new file).
-kes Update Win32 build to include lock.c
-
-Release 2.1.22 beta
-26Jun07
-kes Dirk committed the qwt library code for drawing graphs in bat.
-kes Tweak install of qwt so that it is integrated with ./configure.
-25Jun07
-kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
- out by Eric (my typo).
-ebl Fix configure.in to get batch mode enable
-kes Return correct string from authenticate.cpp in bat when connecting
- to Dir.
-kes Apply patch suggested by Frank Sweetser to fix bug #888 --
- spurious line drops when using TLS.
-kes Do not file reparse points when restoring a file that already
- exists -- Win32.
-24Jun07
-kes Implement Windows reparse points -- similar to directories, but
- we do not descend into it. This is a first cut. They seem to
- be backed up, but restore is not yet tested.
-kes Remove restore_blocking in tls code when shutting a socket to leave
- it in blocking mode. Hopefully this will fix the encryption bug
- reported by Frank Sweetser.
-kes When opening a file for backup, tell the OS that we are going to
- read it sequentially -- optimization.
-kes Change variable names in authenticate_director() to not conflict
- with member names in bat. Caused great confusion with compiler,
- but no warnings.
-23Jun07
-kes Queue openssl error messages in case of comm problem.
-kes Do shutdown() call if socket terminated.
-kes Remove some duplicated code in tls.c
-kes Move more of the bsock member variables into private and access
- them with methods.
-kes Add Frank Sweetser's tls-test to the regression suite.
-22Jun07
-kes Add Swedish sv.po file
-21Jun07
-kes Don't print clock skew message in FD if less than 3 seconds diff.
-kes Add a bit of VSS info to status client.
-kes Implement a first cut of Vista VSS, using Win2003 code.
-
-Release: 2.1.20 beta
-20Jun07
-kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
- loaded tape but uses first drive).
-kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
- This was indeed a Win32 issue.
-19Jun07
-kes Simplify search of autochanger for in-use Volume.
-kes Fix exit condition of check for in-use volume. kes Remove
- inappropriate my_postgresql_free_result() in db_close()
- routine.
-kes Fix bad return in FD when encryption signature not found.
- Probably caused a crash.
-kes Inhibit missing encryption signature error messages for
- file types where no signature computed.
-kes Correct inverted check on autochanger in reservation system.
-kes Tweak debug code in autochanger reservation.
-18Jun07
-kes Add some additional locking in the cats directory in subroutines
- that modify packet variables called from batch insert.
-kes Rework how dcrs are allocated. new_dcr() can now be called
- with an existing pointer, and it will simply clean it up.
- This allows the reservation system to test various different
- devices, and will permit easy device changes.
-kes A bunch of changes all over to handle new new_dcr() calling
- sequence.
-kes Work more on the Volume management in the SD. Remember Volumes
- for tape drives and for autochangers (even virtual disk changers).
-kes When looking at the Volume list to reserve a drive, handle
- autochanger names correctly by interating through the changer
- devices. Also call the Director to see if a Volume is suitable
- for the current job.
-kes Fix some bugs in bscan. Make sure all media records are written.
- Make sure that valid JobMedia records are written for disk files.
- Previously they were completely wrong.
-kes Move source tar files for depkgs-mingw32 to www.bacula.org so
- that the URLs don't change and so that the developers will all
- work off the same copy. Rebuild from scrach.
-kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
-
-Release: 2.1.18 beta
-16Jun07
-kes Fix seg fault in FD from incorrect digest size.
-kes Fix argument to non-OpenSSL crypto.c subroutine.
-
-Release: 2.1.16 beta
-16Jun07
-kes Remove a few malloc()s from the encryption code.
-kes Use the class calls to bsock in filed/backup.c and restore.c in
- place of the old bnet_xxx code.
-kes Implement code that does an on the fly calculation of the
- signing digest during restore of encrypted files. It makes
- a best guess at the algorithm, and if it is not correct, will
- then revert to the old code which reads the file after it is
- restored.
-kes Implement at least one missing crypto stream in stream_to_ascii()
-kes Apply patch from William <chowmeined@gmail.com> that fixes bug
- #877 where a reload with bad syntax causes Dir to exit.
-
-Cut: 2.1.14 beta (not released)
-14Jun07
-kes Do not free a volume on a tape drive until another volume is
- mounted and read, or the autochanger unloads the volume.
- This should help the SD re-use volumes that are already mounted,
- and should fix bug #886.
-kes Apply patch from user brettedgar that allows gnome2-console include
- the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
-kes Apply patch from Lucien Weller that fixes day of week calculation
- because of DST flag problem. Fixes bug #887.
-10Jun07
-kes Move find_next_appendable_volume() to after acquiring a valid device
- in reserve.c. This fixes bug #864 -- confirmed by reporter.
-09Jun07
-kes Unable to reproduce bug 872. However added additional testing for
- integer.
-kes Bug #874 resolved by documenting SQLite limitations.
-kes Bug #882 resolved by documenting mtx-changer script for new drive code.
-kes Bug #881 resolved by removing typo in mtx-changer script.
-kes Made Frank Sweetser's wiki the official Bacula wiki with his
- approval. Added a link to the wiki on the web page, and implemented
- a backup from http://paramount.ind.wpi.edu
-08Jun07
-kes Fix update allfrompool to pass pool name.
-07Jun07
-kes Convert to pure GPL v2 license.
-kes Fix sscanf problems reported by Peter Buschman that caused
- a bus error on Solaris.
-kes Rework (simplify) the select prompt in bat.
-kes Move get_jobid_from_tid() into lib and create a
- get_jcr_from_tid().
-kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
- should definitely fix the problem of lost error messages in the
- encryption code.
-kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
-kes Eliminate tcpd.h from the project. Enclose the #include from the
- library with extern C ...
-kes Add print of signal name when a signal is trapped.
-
-Release: 2.1.12 beta
-04Jun07
-kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
-03Jun07
-kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
- query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
- makes SQLit3 run 30 times faster, though a bit less safe.
-kes Implement --with-batch-insert in configure and detection of thread
- safe libraries. It is on by default, but turned off if no thread
- safe library (e.g. SQLite 2) is available.
-02Jun07
-kes Fix Bacula PostgreSQL buffer overruns.
-kes Do better checking for NULL results returned from PostgreSQL;
- implement retry for failed queries; clear results buffer after
- failed query. Hopefully this will correct the PostgreSQL failures.
-01Jun07
-kes Implement algorithm to handle only one appendable volume with
- Prefer Mounted Volumes = no.
-kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
- returned from a query.
-kes Make volume lock recursive.
-kes Implement an additional volume reservation algorithm that
- starts by considering all reserved volumes then uses the
- old brute force algorithm of searching the resources to
- find a suitable device.
-kes Add new reservations debug code and refine the old code.
-kes Update the win32/dll/bacula.defs file.
-29May07
-kes Tweak reservations algorithm to permit a few more cases, i.e.
- volume reserved, but on different drive, ...
-kes Enhance SD status to include Pool and Media Type for drive in a
- more readable format (a bit longer).
-kes Fix PostgreSQL double free.
-28May07
-kes Minor refactoring of restore decryption code.
-kes Add code to smartall.c to detect double free of a buffer.
-27May07
-kes Add < > around %r in from field on mail command of bacula-dir.conf.in
- so that bsmtp will create a correct email address (mailbox only).
-kes Modify 'memory' command so that the buffers are listed as 'In use'
- to avoid confusion with Orphaned buffers.
-kes I reworked the OpenSSL include/lib flags to be handled in
- the standard Bacula way, which should fix bug #863 concerning
- non-standard OpenSSL libraries.
-26May07
-kes Implement Help Browser window for bat.
-kes Fix reload bug that reset StorageId to zero.
-25May07
-kes Fix TLS #ifdefing when TLS turned off.
-kes Ensure that when labelling a tape with Slot=0 that InChanger
- is not set.
-kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
- the same.
-kes Add StartTime to final uar_sel_jobid_temp query so that we can
- add DISTINCT (required by PostgreSQL).
-kes Implement BSOCK authenticate_director() method. Eventually will
- authenicate all daemons.
-kes Move several more functions into the BSOCK class.
-24May07
-kes Add code to tell the OS that we no longer need a cached
- file that we were reading. In findlib/bfile.c. Also,
- only cache files that we are reading. Thanks to
- Tobias Oetiker <tobi@oetiker.ch> for the idea.
-kes Tweak to bsmtp to eliminate compiler warnings on Win32.
-kes Implement script to automatically generate cats and dll .def
- files for Win32 dll.
-kes Update README.mingw32 to include new .def file generation.
-kes Correct typo in UTF-8 error message as reported by:
- jhernandez <julianhernandez@gmail.com>
-kes Add additional sm_check() code on debug level 1.
-kes Set default debug level to 1.
-kes Trap SIGABRT in attempt to get traceback.
-23May07
-kes Reduce bat connect timeout from 30 to 15 seconds.
-kes More restructuring and implementing BSOCK class in place of
- old bnet.c code.
-kes Remove a few unnecessary malloc() tests in crypto code.
-kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
- not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
-kes Remove duplicate HAVE_CRYPTO definition in config.h.in
-22May07
-kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
- Make buffer bigger.
-kes Fix Verify InitCatalog. The attributes were not pointing to the
- correct saved location.
-kes Implement message callback so that GUI is sure to get all
- daemon messages. Currently displayed in a dialog in bat.
-kes Ignore SIGUSR2 (Bacula timer) in bat.
-kes Apply regress patch from bug #859 to allow regress to work
- with Solaris compiler.
-21May07
-kes Begin adding TLS support to bat.
-kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
- clean up lex.c and make it more readable.
-20May07
-kes Move more bnet functions into the BSOCK class.
-kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
-kes Complete change of berrno strerror() method to bstrerror()
-
-Release: 2.1.10 beta
-18May07
-kes Cleanup incorrect email addresses in bsmtp.
-kes Make bat display initial messages rather than discard them.
-16May07
-kes First cut of adding .mod to the run command.
-kes Implement auto display of messages in bat.
-kes Enhanced preferences to allow all Bacula output to be
- displayed in bat.
-15May07
-kes Try to make bsmtp date routines more generic.
-kes Fixed bug #856 autochanger documentation.
-kes Rework bsmtp date editing for Win32. This fixes bug #854.
-kes Add new cats entry point so Win32 builds.
-14May07
-kes Attempt to fix bsmtp date editing on OSes without %z editing.
- Fixes bug #854.
-kes Do better checking for the MySQL 64 bit libraries looking for both
- .a and .so libraries.
-kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
- /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
-kes Require the thread safe version of MySQL during configure. Thanks
- to Andre Noll for pointing this out.
-kes Ensure that calls to find_jobids_from_mediaid_list() check count before
- continuing in migration code.
-kes Apply implementation of tray-monitor font derived from gnome-console
- submitted by Andreas Piesk <a.piesk@gmx.net>
-13May07
-kes Eliminate important memory loss in SQLite
-kes Fixed the batch insert MySQL thread specific data that was not
- being freed. See cats/mysql.c:db_thread_cleanup().
-kes Fix restore before command.
-kes Convert old hdr.name to name() in a few places.
-kes Implement update jobid command.
-kes Return all time_t dates in db_get_job_record()
-kes Stop watchdog in SD earlier.
-kes Put Pool just after Storage in please mount message.
-kes Fix pointer usage bugs in Verify InitCatalog pointed out by
- Eric.
-12May07
-kes Update the po files.
-kes Fix Verify InitCatalog by making it cache attributes.
-11May07
-kes Change name bacula-bat to bat for man 1 page to correspond to
- Makefile.
-kes Check for client and store NULL pointers in status command. This
- fixes bug #845.
-kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
-kes Fix sign extended editing of %p.
-kes Clean out a little old #ifdefing in cats/mysql.c
-10May07
-kes If time diff between DIR and FD is more than 600 seconds convert
- INFO message to WARNING.
-kes Implement heap size display in status for all daemons.
-kes Attempt to fix MySQL db open memory loss (not successfull).
-kes Don't set SIGKILL and SIGSTOP neither can be trapped.
-kes Eliminate memory loss in MySQL (possibly other SQLs) during
- Query. This looks like a MySQL but but by doing extra releases,
- the memory goes away. This should fix bug #847.
-09May07
-kes When backup fails, cancel SD before waiting for sd termination.
-kes If SD is waiting for FD to connect during cancel, wake up the
- thread.
-kes Fix fsf code so that errno is correctly reported.
-kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
-08May07
-kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
- so that Bacula doesn't later stumble into a seg fault.
-kes Use the term Restore Client in the restore Job report.
-kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
- the original job's FileSetId.
-kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
- spooling in migration jobs. Not yet tested.
-kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
- reading conf file from a pipe. However, do it with open_bpipe()
- rather than popen. Not yet tested.
-07May07
-kes Fix an ugly bug where the VolCatBytes were getting updated
- during a restore.
-kes Implement bconsole memory command that prints current memory
- usage, plus smartalloc dump.
-kes Clarify some error messages in backup, admin, and migrate.
-kes Shrink label dialog to smaller size.
-kes Invert Cancel OK buttons on restore to be OK Cancel.
-kes More strerror() to bstrerror() conversions.
-06May07
-kes Start implementing bstrerror() in place of strerror().
-kes Stripping path -- seems to work.
-04May07
-kes Prevent door and port files from being restored (mostly
- Solaris stuff).
-kes Free an unreleased buffer in compat code.
-kes Change console Job name from *Console* to -Console- to eliminate
- Win32 filename problems. Put Win32 path separator when creating
- Console file. This fixes bug #846.
-kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
- implemented.
-kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
- structure.
-kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
- to force Win32 error message.
-03May07
-kes First cut strip path. The data should be passed to the FD,
- but nothing is done with it yet.
-kes Enhance the digest and signature routines in the crypto
- library to accept a JCR and to use it to print error messages
- so that they will go in the Job report rather than the daemon's
- messages.
-kes Simplify some of the verify signature code.
-kes Simplify a few of the alternative returns in the signature
- code.
-02May07
-ebl Use only POSIX regex instead of GNU regex in breg.c for
- File relocation. It fix broken freebsd compilation.
-kes Convert all other Dir files to use new ua class message
- routines for bat.
-kes Tentative fix for missing digest signature in bug 807.
-kes Correct handle problem in new win32_ftruncate routine.
-kes Convert ua_purge.c and ua_update.c to use new ua class
- message routines for bat.
-29Apr07
-kes Correct incorrect installation of LICENSE in Win32 installer.
-kes Display LICENSE at the beginning of the Win32 install.
-kes Attempt to correct the need for the png files to be installed
- for bat.
-kes Reapply my bat.conf install script in qt-console. I think I
- editted bat.pro instead of bat.pro.in and it was lost.
-kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
- the /var/lock/subsys for subsysdir. Also corrects typos in the
- doc.
-28Apr07
-kes First cut update job.
-kes Correct configure to include qmake of src/qt-console directory.
-26Apr07
-kes Make restore job yes/mod/no print in one command so GUI works.
-kes First cut implementing backup and restore client.
-kes Correct editing in Verify output that caused a seg fault.
-25Apr07
-kes Insure that bat.conf is not overwritten during installation.
-kes Fix important bug in db_sql_query() in mysql.c. It was introduced
- while I was implementing migration in March 2006 !
-24Apr07
-ebl Cleanup file relocation, using char *RegexWhere instead of
- char *where + bool where_use_regexp
-kes Update some manpages and add bat manpage.
-kes Make a first cut at converting bacula.spec.in for bwx-console
- and bgnome-console.
-kes Apply patch from John Goerzen to add hostname as fourth argument
- to make_catalog_backup script.
-kes Fix typos I introduced into bsmtp.c
-kes Make pm_strxxx() routines handle input of NULL pointer. This
- is to protect from NULL pointers returned from SQL databases.
-kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
-kes Add more debug to FIFO code -- fix fifo regression test.
-23Apr07
-kes Implement posix_fadvise in FD, and for reading spool files in SD.
-kes Add thread timer to bnet_connect() to break from OS if wait time
- expires.
-22Apr07
-kes Update Win32 build to include new files, new symbols, and
- renamed files.
-kes Implement socket level heartbeat (tcp_keepidle)
-ebl Commit File relocation patch
-kes Make bat have 'make install' target.
-kes Warn during install if old gnome-console binary found.
-kes Warn during install if old wx-console binary found.
-kes Add -8 option to bsmtp command line to add content type utf-8.
- Fixes bug #809. (Character coding problem in bsmtp).
-kes If < is found in target (from, to, cc) then do not enclose the
- target in < > in bsmtp. Fixes bug #772 (malformed address).
-kes When printing certain items in dbcheck, stop after 300000.
- Fixes bug #822. (dbcheck loops).
-kes Incorrect status in Dir after waiting for mount with poll set.
- Fixes bug #825.
-21Apr07
-kes Extend idea of Prefer Mounted Volumes to mean a volume about
- to be mounted.
-kes Print waiting to reserve a device every 5 mins.
-20Apr07
-kes Don't call close_part in label.c if tape and relabel.
-kes Don't free volume if busy in close() -- should help with
- bug 801.
-ebl Fix #824 RunScript bug (After script could be execute twice)
- Now, Before Script can use RunsOnSuccess and RunsOnFailure options
- By default (like before) RunsOnSuccess=true and RunsOnFailure=false
- Add a regression script to test RunScript
-19Apr07
-kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
- on Solaris.
-18Apr07
-kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
- deprecated. No additional bugs will be fixed, and they will be dropped
- in a future release (probably 2.4.0).
-kes Change name of wx-console to bwx-console to make it more Bacula
- unique.
-kes Change the name of gnome-console to bgnome-console to make it
- more Bacula unique.
-14Apr07
-kes Some time in March, a Feature Request with patch from Jorj Bauer
- <jorj@seas.upenn.edu> was committed by Landon (with my approval).
- It implements:
- The ability for the director to validate a Client (FD) CN against
- an arbitrary set of patterns rather than the hostname, with
- A new 'TLS Allowed CN' set of directives which are implemented
- in the Client resource. Then pattern matching is used in place
- of hostname matching against the Certificate's CN. As an example, we
- have certificates which (a) use a local CA, and (b) have a CN of the
- form client_123.
-kes Add new/changed entry points to Win32 build
-kes Create unaccepted-projects for projects that are not accepted.
-kes Simplify locking in the reservations system.
-kes Add more debug code in reservations.
-kes Make sure error condition on reserving a volume is handled correctly.
-kes Correct handling of volume_in_use.
-kes Correct handling of initializing a device.
-kes Move handling of broadcasting releasing a device into release_device().
-kes Correct attaching dcr to dev so that it is only done if device
- is properly initiated.
-12Apr07
-kes Locking debug level tweaks in SD.
-kes Tweak new Volume code.
-11Apr07
-kes Add exec external-command [wait-seconds] to bconsole. This
- executes the external-command. Note! normally external-command
- should be enclosed in double quotes.
-kes Turn the .die command on only if DEVELOPER is defined -- i.e.
- it should normally be off in a production system.
-10Apr07
-kes Implement die command for SD so that we can force it to dump.
-kes Implement SD lock debug code.
-kes Implement new algorithm for keeping Volume list in SD. It
- is now owned by the device.
-04Apr07
-kes Implement new code for freeing in use volumes that should
- resolve if not all, some of the problems of multiple drive
- tape conflicts described in bug 801.
-03Apr07
-kes Fix gui/bacula-web/images files in svn.
-kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
-02Apr07
-ebl Fix a bug in batch mode (in string escape)
-kes Correct migration prune SQL typo that crept in in a
- recent 2.1.x change.
-01Apr07
-kes Move bnet_despool() into class in bsock.c
-kes Modify job report to include director name and Build OS.
-kes Move drop root privilege and check_catalog() before fork.
-kes Add update database scripts (version 9 to 10) to updatedb directory.
-31Mar07
-ebl Check size and age of each file after its backup to see if
- it has changed during backup, if 'checkfilechanges' is set.
- The FD will do an extra check (stat(2)) after
- each file backup. mtime, ctime and size are compared with
- 'before backup' information. If time or size mismatch, an
- error message will be generated. You must upgrade FD to use it.
-30Mar07
-kes Make database name and user configurable
- --with-db-name=xxx --with-db-user=xxx
-kes Add back database type to message.c for debugging.
-29Mar07
-kes Implement dir_sql() which issues an SQL query.
-kes Modify bat medialist to use dir_sql() and do some minor C++
- formatting as well as eliminating a number of pointers, simplifing
- the code.
-28Mar07
-kes Fix some of the mtx-changer grep commands for tape label readers.
-kes Convert a number of bsendmsg into the appropriate send/warning/error
- message class calls.
-kes Suppress the using database message in the .sql command.
-kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
-27Mar07
-kes Add context menu for floating a window.
-kes Some minor cleanup and name changes in qt-console
-kes Add doing mt setblk 0 in Win32 mtx-changer.
-kes Apply Martin's bug fix to move definition of ENODATA for
- FreeBSD to bsock.c
-ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
- sqlite2 and sqlite3.
-26Mar07
-kes More pruning cleanup.
-kes Turn on wait_for_drive by default in mtx-changer.
-kes Turn on Batch insert code by default as it now passes regression.
-kes Add ./configure --enable-bat to enable building of Bat.
- No install yet though.
-25Mar07
-kes Implement a new .sql command for bat.
-kes Implement code to turn off pruning in obtaining the next volume.
- Pruning is turned off for the status dir command, but turned on
- for SD requests and for the list nextvolume command.
-24Mar07
-kes Correct Qmsg() that was not updated correctly when committing a
- previous change (probably the recent TLS patch).
-23Mar07
-kes Write new subroutine is_volume_purged() that explicitly checks
- if the Volume is purged, and if so marks it as such. This should
- resolve problems reported about needing to mount twice to recycle
- volumes.
-kes Rewrite pruning algorithm to do more work in the SQL engine, and
- to pass a list of JobIds to be deleted to SQL. Also, minimize the
- amount of duplicated code.
-kes Do volume pruning only for the Media Type desired (reduces pruning time
- if multiple Media Types are in the same pool).
-kes Implement more detailed info in the Job report for the Bacula version
- and architecture.
-kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
- ua_purge.c.
-ebl Add bbatch tool to bench database and insert mode.
- Fix sql quote stuff in batch mode
- Fix sql stuff for mysql
-22Mar07
-kes Correct problems with am/pm scheduling. Fixes bug #808.
-kes Implement new prunning code that prunes up to 1000 jobs at
- the same time. The same technique can be applied to a number
- of other prune/purge subroutines.
-kes Add an insanity check when starting a new tape job to ensure
- that the tape position has not been changed. If so fail the
- job.
-kes Fix Win32 build for dlls to add the folllowing:
- src/lib/bsock.c -- new file with new entry points
- src/lib/dlist.c -- new entry points
- src/cats/sql_create.c -- new entry point
- src/cats/sql_cmds.c -- new DATA item exported
-21Mar07
-ebl batch mode cleanup bscan-test is ok now.
-kes Implement SD code to check length of disk volume before appending.
-18Mar07
-kes Correct return status on db_batch... routines.
-kes Add call to db_write_batch_file_records() to migration code.
-ebl Fix AfterJob timing
-kes Move the checking of the database in initializion of the Director
- to after we drop privileges. This avoids the need for both root
- and bacula access to the DB.
-kes Correct a misplaced variable definition in src/filed/backup.c
-kes Correct how the new batch insert db_create_attributes_record()
- uses the arguments. Caused a seg fault in bscan.
-kes Implement lock() and unlock() methods in DEVICE class.
- Implement block() and set_block(xx) methods in DEVICE class.
-kes Modify bnet_connect() so that it uses time() to check for the
- wait time expiring (on some OSes, some system calls may not
- return immediately).
-kes Modify Verify to obtain the previous JobId when it is actually
- running rather than at schedule time (as it was in 1.38.x).
-kes Fix src/job.c to handle MaxWaitTime correctly. This should
- fix bug #802.
-kes When checking pid in pid file, continue running if the pid is
- the same as ours. This occurs on IRIX after a system crash.
- Fixes bug #797.
-10Mar07
-kes Extend new GUI API.
-kes Make the ua structure a class, and implement send_msg(),
- error_msg(), warning_msg(), and info_msg().
-08Mar07
-kes Apply fix from for building wx-console on the Mac from
- bug #798.
-kes Implement new select mechanism for GUI programs.
-kes Reorganize initialization of stackedWidgets in bat.
-07Mar07
-kes Add updated nagios plugin supplied by Christian Masopust.
-05Mar07
-kes More bat implementation.
-kes File migrate bug with Pool Occupancy using mediaid instead
- of jobids. Fixes bug #795.
-kes Fix orphaned buffers in filed backup and verify due to
- crypto buffers not freed during errors. Fixes bug #789.
-kes Extend new GUI api code to tree commands.
-kes Ensure that tree and dot commands check console ACLs.
-kes Permit marking directory with trailing slash.
-kes Allow 20 console connections (instead of only 10).
-04Mar07
-kes Add smartctl call to bacula-sd.conf as an example of getting
- tape alert info.
-02Mar07
-kes Modify jobq.c to let simultaneous restore jobs run. This may
- cause them to fail if they cannot get a drive.
-kes Add Client Connect Wait to Storage daemon to permit users to
- modify the time the SD waits for a FD connection.
-29Feb07
-kes Correct virtual changer check which was backwards. This caused
- volumes to be unloaded into slots already occupied.
-28Feb07
-kes Apply Command ACL filter to JobId list in restore command.
-kes Correct typeo in var.c patch.
-27Feb07
-kes Don't let Bacula prune File or Job records for the current Job.
-kes Fix variable substitution pad + inc bug reported (with patch)
- in bug #791.
-26Feb07
-kes Correct SQLite log table index as reported by Luca Berra.
-24Feb07
-ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
-22Feb07
-kes Begin implementing new comm signals for API.
-kes Fix a few places in lib/message.c where the open fd may
- not be zeroed.
-kes Continue implementing lib/bsock.c (real class). Make jcr,
- who, host, and port private. There are new methods to access
- them for non-class use. This required touching a number of files.
-21Feb07
-kes Add LANG=C to autoconf/randpass so it works with languages other
- than English. Fixes bug #788.
-20Feb07
-ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
- This fixes bug #780
- You will not be able to generate Include/Exclude list any more.
- It will be fixed soon.
- If you want to use this, you can apply
- trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
-19Feb07
-kes Restore of sockets created false error messages because Bacula
- no longer restores sockets, but the code was still trying to
- set the attributes on a non-existent file. Reported by a user.
-ebl finish RecyclePool feature
- Media will takes Pool.RecyclePool
- when moving from Scratch to a Pool or when user will do
- update volume=xxx frompool
- To use it, add RecyclePool = aPool to your Pool resource
- Pool {
- Name = Default
- RecyclePool = Scratch
- ...
- }
- TODO: update manual
-kes Expand new BSOCK class adding signal() and new BNET signals.
-kes Begin enhancing the dot commands adding a new API function
- that returns more information and will make it easier
- to interface to the Director from a program.
-18Feb07
-kes Make DEVICE fd private. Its new name is m_fd, and can be
- obtained with dev->fd() outside the class. This is the
- first of many DEVICE members to be made private.
-kes Implement Michael Renner's idea on having a virtual disk
- changer. I made some minor modifications (e.g. I did not
- implement the Virtual Changer directive, but simply set
- the Changer Command to an empty string.
-17Feb07
-kes Implement a BSOCK send() method that writes the whole record
- in a single write() request rather than in two.
-ebl add update volume=xxx recyclepool=yyyy
- volume takes recyclepool from pool when using update volume=xxx from pool
-16Feb07
-kes Fix encryption deblocking bug, which caused some restored files
- to be truncated. This fixes bug #763.
-kes Add FD event sequence order prepared by Eric -- for RunScripts.
-kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
-13Feb07
-kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
-ebl Use btime_t instead of uint64_t in media patch.
-11Feb07
-kes Optimize the use of the database a bit in the Status dir command.
- Only open it when needed, ensure that if any previous database
- was opened, it is closed.
-10Feb07
-kes Correct VolCatBytes bug from media patch.
-kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
- in the case of orphaned records.
-kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
- and File records in 300K chunks to be more efficient. This
- idea came from Juan Luis Frances (if I remember right).
-kes Apply Eric's scratch patch that moves a purged Volume to
- the RecyclePool. Question: how is RecyclePool set? what
- happens to the ScratchPool?
-kes Apply Eric's media patch that collects read/write media
- times as well as byte counts. This patch requires a
- simultaneous upgrade of the DIR and SD. Note, there
- should be some way to turn off timing. I'm not sure
- times are in Bacula units.
-kes Apply Eric's batch-insert patch.
-09Feb07
-kes Update projects list.
-08Feb07
-kes Implement Include/Exclude file lists in FD as dlists using
- the new dlistString class. This permits efficiently having
- large include/exclude lists and completes project Item 25.
-kes Fix dird/ua_cmds.c so that a cancel command checks if the
- console is authorized to cancel the job. This fixes bug
- #767.
-kes Modify SD so that the VolCatJobs medium record is updated
- at the beginning of a Job rather than the end. This
- fixes bug #775 where exceeding MaxVolJobs caused jobs
- to fail.
-kes Added a mutex around getting and setting Volume information
- so that multiple simultaneous jobs will single thread.
-07Feb07
- Switch to using Subversion
-kes Remove src/pygtk-console/ from configure
-06Feb07
-kes Delete src/lib/btree.c from win32 build, then add rblist.c
- plus the entrypoints.
-kes Apply patch supplied that corrects debug print
- in canceling jobs for max run time. Supplied as
- part of bug #621, which was previously fixed.
-05Feb07
-kes Test on job_canceled() and sd_msg_thread_done inside
- loop starting the message thread to avoid a race condition.
- Fixes bug #771.
-kes Remove rl_catch_signal from console.c as it conflicted
- with the header definition. Fixes bug #765.
-ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
-04Feb07
-kes Clarify some stored/acquire messages to indicate if the
- problem is with read or append.
-02Feb07
-kes Fix memory leak with storage ids in cats/sql_get.c
-kes Terminate watchdog earlier to avoid reference to released
- memory -- reported by Jason Austin.
-kes Move closing the database from jobq.c to the director daemon
- termination routine. This fixes memory leaks for shadow jobs
- (i.e. migration jobs).
-kes Free up the unique jobid chain items in migrate.c. This fixes
- a memory leak problem.
-kes Convert some ugly looking for statements to use foreach_alist
- in findlib/find.c. This will facilitate converting the structures
- to use dlist (for large include/exclude lists).
-kes Fix a bug in the btree.c and btree.h routines, then rename them
- rblist and add them to be built in src/lib. Include some new
- methods written by Rudolf Cejka that make the code more readable
- (hides some of the ugly casting).
-kes Add set_next() and set_prev() methods which make the code much more
- readable. Also add a new dlistString class that facilitates storing
- strings in dlists. To be used in the large include/exclude lists.
-kes Make some trivial modifications to lib/tree.h that use rblist
- rather than dlist for storing the tree links. This was suggested
- by Rudolf Cejka. The result of this is that the restore tree now
- uses red-black binary trees rather than simple linked lists. This
- should give rather dramatic speed improvements for directories
- contining large numbers of directories/files (more than 10000).
-28Jan07
-kes Fix maxruntime bug #621.
-26Jan07
-ebl Implement the include JobID in spool file name project.
-kes Reorder projects file in order determined by Jan 2007 vote.
-kes Implement item #12 on project list -- quick release of FD by
- the SD.
-kes Fix open of SQLite3 db where user does not have write permission
- so that DIR does not crash. Fixes bug #761.
-25Jan07
-kes Add back missing @ in Win32 Makefile.
-kes Change 'Device not configured to autolabel' from INFO
- to WARNING.
-kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
- which should restart an indefinite # of times.
-kes Fix configure --help to print --with-mysql[=DIR]. Same for
- other DIR specifications.
-23Jan07
-rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
- Fix path quoting in SQLite scripts.
- Fix problems with SHGetFolderPath.
-19Jan07
-kes Create patches/2.0.1-restart.patch. Fixes bug #755.
-18Jan07
-kes Fix Job restart on error bug that promotes an Inc to a Full
- backup. This should fix bug #755.
-kes Add qt-console and first cut of code.
-
-Version 2.0.1
-12Jan07
-kes Fix Bacula->Documentation link on Win32 to point to index.html
- instead of bacula.html. Fixed bug #750.
-kes Return JobId in db_get_job_record() when JobId==0. This should
- fix bug #741.
-kes Do not release source pointers when restarting a failed job.
-11Jan07
-kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
- This *should* fix bug #747.
-kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
- bug #742.
-09Jan07
-kes Modify USTORE constructor to set an empty store_source string,
- and don't copy the store_source string in a cancel. Hopefully
- this will fix Arno's seg fault, bug #744.
-kes Add back code to disable conio in configure. Fixes bug #743.
-kes Correct the Options scanner in the FD to correctly handle
- SHA1 option, which was eating the next option. Reported by
- Sebastien Guilbaud.
-kes Add code to indicate when the SD is spooling, spool wait, and
- despooling as requested by Alan Brown.
-
-Version 2.0.0 released: 4 January 2007
+Release Version 2.2.8
projects / bacula / bacula / commitdiff