target: Pull out the jtag_rtck from iMX5x files

Pull the jtag_rtck setting from imx51.cfg and imx53.cfg . Since
not all boards using these CPUs do support RTCK signal, move the
configuration of RTCK into board files.

Change-Id: I632c5d38e00ada8779a451cd26428fd122452001
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/1460
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

diff --git a/tcl/board/efikamx.cfg b/tcl/board/efikamx.cfg
index f8ae25d82c4857c87a7c9abd74b3a0a27bde7eb4..007b312beb6318149af130ab36054ff80e19cca7 100644 (file)
--- a/tcl/board/efikamx.cfg
+++ b/tcl/board/efikamx.cfg
@@ -3,6 +3,7 @@
 
 # Fall back to 6MHz if RTCK is not supported
 jtag_rclk 6000
+$_TARGETNAME configure -event "reset-start" { jtag_rclk 6000 }
 
 source [find target/imx51.cfg]
 

diff --git a/tcl/board/icnova_imx53_sodimm.cfg b/tcl/board/icnova_imx53_sodimm.cfg
index e37887e558a602907e82f994930f816399de9457..aa6a148a0a9cd059f9716b17f4cab8cc9798d1bd 100644 (file)
--- a/tcl/board/icnova_imx53_sodimm.cfg
+++ b/tcl/board/icnova_imx53_sodimm.cfg
@@ -17,6 +17,10 @@ echo "i.MX53 SO-Dimm board lodaded."
 
 adapter_khz 3000
 
+# Slow speed to be sure it will work
+jtag_rclk 1000
+$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
+
 $_TARGETNAME configure -event "reset-assert" {
        echo "Reseting ...."
        #cortex_a dbginit

diff --git a/tcl/board/imx53loco.cfg b/tcl/board/imx53loco.cfg
index 4c8a8da129dbc005d6fc6cea2dcc16e3483702db..06c3993781e93d6eb1481ca1833f179022b87741 100644 (file)
--- a/tcl/board/imx53loco.cfg
+++ b/tcl/board/imx53loco.cfg
@@ -15,6 +15,10 @@ echo "iMX53 Loco board lodaded."
 
 adapter_khz 3000
 
+# Slow speed to be sure it will work
+jtag_rclk 1000
+$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
+
 #jtag_nsrst_delay 200
 #jtag_ntrst_delay 200
 

diff --git a/tcl/target/imx51.cfg b/tcl/target/imx51.cfg
index 0ee388c93ee682a3a2f5ee995ad763efc8661e54..15d5c048f2216ccc9eed63f57cce1384c940c192 100644 (file)
--- a/tcl/target/imx51.cfg
+++ b/tcl/target/imx51.cfg
@@ -44,8 +44,4 @@ proc imx51_dbginit {target} {
      cortex_a dbginit
 }
 
-# Slow speed to be sure it will work
-jtag_rclk 1000
-$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
-
 $_TARGETNAME configure -event reset-assert-post "imx51_dbginit $_TARGETNAME"

diff --git a/tcl/target/imx53.cfg b/tcl/target/imx53.cfg
index 61fabc8a73814afeba5f20ce4e0cbb4e3bd6f56a..e77bc340d0aaf3332c45ff68ce39be2997d93116 100644 (file)
--- a/tcl/target/imx53.cfg
+++ b/tcl/target/imx53.cfg
@@ -44,8 +44,4 @@ proc imx53_dbginit {target} {
      cortex_a dbginit
 }
 
-# Slow speed to be sure it will work
-jtag_rclk 1000
-$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
-
 $_TARGETNAME configure -event reset-assert-post "imx53_dbginit $_TARGETNAME"