Projects:
Bacula Projects Roadmap
- Status updated 12 January 2007
+ Status updated 26 January 2007
+ After re-ordering in vote priority
Summary:
-Item 1: Accurate restoration of renamed/deleted files
-Item 2: Implement a Bacula GUI/management tool.
-Item 3: Implement Base jobs.
-Item 4: Implement from-client and to-client on restore command line.
-Item 5: Implement creation and maintenance of copy pools
-Item 6: Merge multiple backups (Synthetic Backup or Consolidation).
-Item 7: Deletion of Disk-Based Bacula Volumes
-Item 8: Implement a Python interface to the Bacula catalog.
-Item 9: Archival (removal) of User Files to Tape
-Item 10: Add Plug-ins to the FileSet Include statements.
-Item 11: Implement more Python events in Bacula.
-Item 12: Quick release of FD-SD connection after backup.
-Item 13: Implement huge exclude list support using hashing.
-Item 14: Allow skipping execution of Jobs
-Item 15: Tray monitor window cleanups
-Item 16: Split documentation
-Item 17: Automatic promotion of backup levels
-Item 18: Add an override in Schedule for Pools based on backup types.
-Item 10: An option to operate on all pools with update vol parameters
-Item 20: Include JobID in spool file name
-Item 21: Include timestamp of job launch in "stat clients" output
-Item 22: Message mailing based on backup types
-Item 23: Allow inclusion/exclusion of files in a fileset by creation/mod times
-Item 24: Add a scheduling syntax that permits weekly rotations
-Item 25: Improve Bacula's tape and drive usage and cleaning management.
-Item 26: Implement support for stacking arbitrary stream filters, sinks.
-Item 27: Allow FD to initiate a backup
-Item 28: Directive/mode to backup only file changes, not entire file
-Item 29: Automatic disabling of devices
-Item 30: Incorporation of XACML2/SAML2 parsing
-Item 31: Clustered file-daemons
-Item 32: Commercial database support
-Item 33: Archive data
-Item 34: Filesystem watch triggered backup.
-Item 35: Implement multiple numeric backup levels as supported by dump
-Item 36: Implement a server-side compression feature
-Item 37: Cause daemons to use a specific IP address to source communications
-Item 38: Multiple threads in file daemon for the same job
-Item 39: Restore only file attributes (permissions, ACL, owner, group...)
-Item 40: Add an item to the restore option where you can select a pool
-
-Below, you will find more information on future projects:
+Item: 1 Accurate restoration of renamed/deleted files
+Item: 2 Implement a Bacula GUI/management tool.
+Item: 3 Allow FD to initiate a backup
+Item: 4 Merge multiple backups (Synthetic Backup or Consolidation).
+Item: 5 Deletion of Disk-Based Bacula Volumes
+Item: 6 Implement Base jobs.
+Item: 7 Implement creation and maintenance of copy pools
+Item: 8 Directive/mode to backup only file changes, not entire file
+Item: 9 Implement a server-side compression feature
+Item: 10 Improve Bacula's tape and drive usage and cleaning management.
+Item: 11 Allow skipping execution of Jobs
+Item: 12 Add a scheduling syntax that permits weekly rotations
+Item: 13 Archival (removal) of User Files to Tape
+Item: 14 Cause daemons to use a specific IP address to source communications
+Item: 15 Multiple threads in file daemon for the same job
+Item: 16 Add Plug-ins to the FileSet Include statements.
+Item: 17 Restore only file attributes (permissions, ACL, owner, group...)
+Item: 18 Quick release of FD-SD connection after backup.
+Item: 19 Implement a Python interface to the Bacula catalog.
+Item: 20 Archive data
+Item: 21 Split documentation
+Item: 22 Implement support for stacking arbitrary stream filters, sinks.
+Item: 23 Implement from-client and to-client on restore command line.
+Item: 24 Add an override in Schedule for Pools based on backup types.
+Item: 25 Implement huge exclude list support using hashing.
+Item: 26 Implement more Python events in Bacula.
+Item: 27 Incorporation of XACML2/SAML2 parsing
+Item: 28 Filesystem watch triggered backup.
+Item: 29 Allow inclusion/exclusion of files in a fileset by creation/mod times
+Item: 30 Tray monitor window cleanups
+Item: 31 Implement multiple numeric backup levels as supported by dump
+Item: 32 Automatic promotion of backup levels
+Item: 33 Clustered file-daemons
+Item: 34 Commercial database support
+Item: 35 Automatic disabling of devices
+Item: 36 An option to operate on all pools with update vol parameters
+Item: 37 Add an item to the restore option where you can select a pool
+Item: 38 Include timestamp of job launch in "stat clients" output
+Item: 39 Message mailing based on backup types
+Item: 40 Include JobID in spool file name
+
Item 1: Accurate restoration of renamed/deleted files
Date: 28 November 2005
Lucas Di Pentima <lucas at lunix dot com dot ar> but
it is no longer being developed.
+Item 3: Allow FD to initiate a backup
+ Origin: Frank Volf (frank at deze dot org)
+ Date: 17 November 2005
+ Status:
+
+ What: Provide some means, possibly by a restricted console that
+ allows a FD to initiate a backup, and that uses the connection
+ established by the FD to the Director for the backup so that
+ a Director that is firewalled can do the backup.
+
+ Why: Makes backup of laptops much easier.
+
+
+Item 4: Merge multiple backups (Synthetic Backup or Consolidation).
+ Origin: Marc Cousin and Eric Bollengier
+ Date: 15 November 2005
+ Status: Waiting implementation. Depends on first implementing
+ project Item 2 (Migration) which is now done.
+
+ What: A merged backup is a backup made without connecting to the Client.
+ It would be a Merge of existing backups into a single backup.
+ In effect, it is like a restore but to the backup medium.
+
+ For instance, say that last Sunday we made a full backup. Then
+ all week long, we created incremental backups, in order to do
+ them fast. Now comes Sunday again, and we need another full.
+ The merged backup makes it possible to do instead an incremental
+ backup (during the night for instance), and then create a merged
+ backup during the day, by using the full and incrementals from
+ the week. The merged backup will be exactly like a full made
+ Sunday night on the tape, but the production interruption on the
+ Client will be minimal, as the Client will only have to send
+ incrementals.
+
+ In fact, if it's done correctly, you could merge all the
+ Incrementals into single Incremental, or all the Incrementals
+ and the last Differential into a new Differential, or the Full,
+ last differential and all the Incrementals into a new Full
+ backup. And there is no need to involve the Client.
+
+ Why: The benefit is that :
+ - the Client just does an incremental ;
+ - the merged backup on tape is just as a single full backup,
+ and can be restored very fast.
+
+ This is also a way of reducing the backup data since the old
+ data can then be pruned (or not) from the catalog, possibly
+ allowing older volumes to be recycled
+
+Item 5: Deletion of Disk-Based Bacula Volumes
+ Date: Nov 25, 2005
+ Origin: Ross Boylan <RossBoylan at stanfordalumni dot org> (edited
+ by Kern)
+ Status:
+
+ What: Provide a way for Bacula to automatically remove Volumes
+ from the filesystem, or optionally to truncate them.
+ Obviously, the Volume must be pruned prior removal.
+
+ Why: This would allow users more control over their Volumes and
+ prevent disk based volumes from consuming too much space.
+
+ Notes: The following two directives might do the trick:
+
+ Volume Data Retention = <time period>
+ Remove Volume After = <time period>
+
+ The migration project should also remove a Volume that is
+ migrated. This might also work for tape Volumes.
-Item 3: Implement Base jobs.
+Item 6: Implement Base jobs.
Date: 28 October 2005
Origin: Kern
Status:
FD a list of files/attribs, and the FD must search the
list and compare it for each file to be saved.
-Item 4: Implement from-client and to-client on restore command line.
- Date: 11 December 2006
- Origin: Discussion on Bacula-users entitled 'Scripted restores to
- different clients', December 2006
- Status: New feature request
-
- What: While using bconsole interactively, you can specify the client
- that a backup job is to be restored for, and then you can
- specify later a different client to send the restored files
- back to. However, using the 'restore' command with all options
- on the command line, this cannot be done, due to the ambiguous
- 'client' parameter. Additionally, this parameter means different
- things depending on if it's specified on the command line or
- afterwards, in the Modify Job screens.
-
- Why: This feature would enable restore jobs to be more completely
- automated, for example by a web or GUI front-end.
-
- Notes: client can also be implied by specifying the jobid on the command
- line
-
-Item 5: Implement creation and maintenance of copy pools
+Item 7: Implement creation and maintenance of copy pools
Date: 27 November 2005
Origin: David Boyes (dboyes at sinenomine dot net)
Status:
Notes: I would commit some of my developers' time if we can agree
on the design and behavior.
-Item 6: Merge multiple backups (Synthetic Backup or Consolidation).
- Origin: Marc Cousin and Eric Bollengier
- Date: 15 November 2005
- Status: Waiting implementation. Depends on first implementing
- project Item 2 (Migration) which is now done.
+Item 8: Directive/mode to backup only file changes, not entire file
+ Date: 11 November 2005
+ Origin: Joshua Kugler <joshua dot kugler at uaf dot edu>
+ Marek Bajon <mbajon at bimsplus dot com dot pl>
+ Status:
- What: A merged backup is a backup made without connecting to the Client.
- It would be a Merge of existing backups into a single backup.
- In effect, it is like a restore but to the backup medium.
+ What: Currently when a file changes, the entire file will be backed up in
+ the next incremental or full backup. To save space on the tapes
+ it would be nice to have a mode whereby only the changes to the
+ file would be backed up when it is changed.
- For instance, say that last Sunday we made a full backup. Then
- all week long, we created incremental backups, in order to do
- them fast. Now comes Sunday again, and we need another full.
- The merged backup makes it possible to do instead an incremental
- backup (during the night for instance), and then create a merged
- backup during the day, by using the full and incrementals from
- the week. The merged backup will be exactly like a full made
- Sunday night on the tape, but the production interruption on the
- Client will be minimal, as the Client will only have to send
- incrementals.
+ Why: This would save lots of space when backing up large files such as
+ logs, mbox files, Outlook PST files and the like.
- In fact, if it's done correctly, you could merge all the
- Incrementals into single Incremental, or all the Incrementals
- and the last Differential into a new Differential, or the Full,
- last differential and all the Incrementals into a new Full
- backup. And there is no need to involve the Client.
+ Notes: This would require the usage of disk-based volumes as comparing
+ files would not be feasible using a tape drive.
- Why: The benefit is that :
- - the Client just does an incremental ;
- - the merged backup on tape is just as a single full backup,
- and can be restored very fast.
+Item 9: Implement a server-side compression feature
+ Date: 18 December 2006
+ Origin: Vadim A. Umanski , e-mail umanski@ext.ru
+ Status:
+ What: The ability to compress backup data on server receiving data
+ instead of doing that on client sending data.
+ Why: The need is practical. I've got some machines that can send
+ data to the network 4 or 5 times faster than compressing
+ them (I've measured that). They're using fast enough SCSI/FC
+ disk subsystems but rather slow CPUs (ex. UltraSPARC II).
+ And the backup server has got a quite fast CPUs (ex. Dual P4
+ Xeons) and quite a low load. When you have 20, 50 or 100 GB
+ of raw data - running a job 4 to 5 times faster - that
+ really matters. On the other hand, the data can be
+ compressed 50% or better - so losing twice more space for
+ disk backup is not good at all. And the network is all mine
+ (I have a dedicated management/provisioning network) and I
+ can get as high bandwidth as I need - 100Mbps, 1000Mbps...
+ That's why the server-side compression feature is needed!
+ Notes:
- This is also a way of reducing the backup data since the old
- data can then be pruned (or not) from the catalog, possibly
- allowing older volumes to be recycled
+Item 10: Improve Bacula's tape and drive usage and cleaning management.
+ Date: 8 November 2005, November 11, 2005
+ Origin: Adam Thornton <athornton at sinenomine dot net>,
+ Arno Lehmann <al at its-lehmann dot de>
+ Status:
-Item 7: Deletion of Disk-Based Bacula Volumes
- Date: Nov 25, 2005
- Origin: Ross Boylan <RossBoylan at stanfordalumni dot org> (edited
- by Kern)
- Status:
+ What: Make Bacula manage tape life cycle information, tape reuse
+ times and drive cleaning cycles.
- What: Provide a way for Bacula to automatically remove Volumes
- from the filesystem, or optionally to truncate them.
- Obviously, the Volume must be pruned prior removal.
+ Why: All three parts of this project are important when operating
+ backups.
+ We need to know which tapes need replacement, and we need to
+ make sure the drives are cleaned when necessary. While many
+ tape libraries and even autoloaders can handle all this
+ automatically, support by Bacula can be helpful for smaller
+ (older) libraries and single drives. Limiting the number of
+ times a tape is used might prevent tape errors when using
+ tapes until the drives can't read it any more. Also, checking
+ drive status during operation can prevent some failures (as I
+ [Arno] had to learn the hard way...)
- Why: This would allow users more control over their Volumes and
- prevent disk based volumes from consuming too much space.
+ Notes: First, Bacula could (and even does, to some limited extent)
+ record tape and drive usage. For tapes, the number of mounts,
+ the amount of data, and the time the tape has actually been
+ running could be recorded. Data fields for Read and Write
+ time and Number of mounts already exist in the catalog (I'm
+ not sure if VolBytes is the sum of all bytes ever written to
+ that volume by Bacula). This information can be important
+ when determining which media to replace. The ability to mark
+ Volumes as "used up" after a given number of write cycles
+ should also be implemented so that a tape is never actually
+ worn out. For the tape drives known to Bacula, similar
+ information is interesting to determine the device status and
+ expected life time: Time it's been Reading and Writing, number
+ of tape Loads / Unloads / Errors. This information is not yet
+ recorded as far as I [Arno] know. A new volume status would
+ be necessary for the new state, like "Used up" or "Worn out".
+ Volumes with this state could be used for restores, but not
+ for writing. These volumes should be migrated first (assuming
+ migration is implemented) and, once they are no longer needed,
+ could be moved to a Trash pool.
- Notes: The following two directives might do the trick:
+ The next step would be to implement a drive cleaning setup.
+ Bacula already has knowledge about cleaning tapes. Once it
+ has some information about cleaning cycles (measured in drive
+ run time, number of tapes used, or calender days, for example)
+ it can automatically execute tape cleaning (with an
+ autochanger, obviously) or ask for operator assistance loading
+ a cleaning tape.
- Volume Data Retention = <time period>
- Remove Volume After = <time period>
+ The final step would be to implement TAPEALERT checks not only
+ when changing tapes and only sending the information to the
+ administrator, but rather checking after each tape error,
+ checking on a regular basis (for example after each tape
+ file), and also before unloading and after loading a new tape.
+ Then, depending on the drives TAPEALERT state and the known
+ drive cleaning state Bacula could automatically schedule later
+ cleaning, clean immediately, or inform the operator.
- The migration project should also remove a Volume that is
- migrated. This might also work for tape Volumes.
+ Implementing this would perhaps require another catalog change
+ and perhaps major changes in SD code and the DIR-SD protocol,
+ so I'd only consider this worth implementing if it would
+ actually be used or even needed by many people.
-Item 8: Implement a Python interface to the Bacula catalog.
- Date: 28 October 2005
- Origin: Kern
- Status:
+ Implementation of these projects could happen in three distinct
+ sub-projects: Measuring Tape and Drive usage, retiring
+ volumes, and handling drive cleaning and TAPEALERTs.
- What: Implement an interface for Python scripts to access
- the catalog through Bacula.
+Item 11: Allow skipping execution of Jobs
+ Date: 29 November 2005
+ Origin: Florian Schnabel <florian.schnabel at docufy dot de>
+ Status:
- Why: This will permit users to customize Bacula through
- Python scripts.
+ What: An easy option to skip a certain job on a certain date.
+ Why: You could then easily skip tape backups on holidays. Especially
+ if you got no autochanger and can only fit one backup on a tape
+ that would be really handy, other jobs could proceed normally
+ and you won't get errors that way.
-Item 9: Archival (removal) of User Files to Tape
+Item 12: Add a scheduling syntax that permits weekly rotations
+ Date: 15 December 2006
+ Origin: Gregory Brauer (greg at wildbrain dot com)
+ Status:
- Date: Nov. 24/2005
+ What: Currently, Bacula only understands how to deal with weeks of the
+ month or weeks of the year in schedules. This makes it impossible
+ to do a true weekly rotation of tapes. There will always be a
+ discontinuity that will require disruptive manual intervention at
+ least monthly or yearly because week boundaries never align with
+ month or year boundaries.
- Origin: Ray Pengelly [ray at biomed dot queensu dot ca
- Status:
+ A solution would be to add a new syntax that defines (at least)
+ a start timestamp, and repetition period.
- What: The ability to archive data to storage based on certain parameters
- such as age, size, or location. Once the data has been written to
- storage and logged it is then pruned from the originating
- filesystem. Note! We are talking about user's files and not
- Bacula Volumes.
+ Why: Rotated backups done at weekly intervals are useful, and Bacula
+ cannot currently do them without extensive hacking.
+
+ Notes: Here is an example syntax showing a 3-week rotation where full
+ Backups would be performed every week on Saturday, and an
+ incremental would be performed every week on Tuesday. Each
+ set of tapes could be removed from the loader for the following
+ two cycles before coming back and being reused on the third
+ week. Since the execution times are determined by intervals
+ from a given point in time, there will never be any issues with
+ having to adjust to any sort of arbitrary time boundary. In
+ the example provided, I even define the starting schedule
+ as crossing both a year and a month boundary, but the run times
+ would be based on the "Repeat" value and would therefore happen
+ weekly as desired.
+
+
+ Schedule {
+ Name = "Week 1 Rotation"
+ #Saturday. Would run Dec 30, Jan 20, Feb 10, etc.
+ Run {
+ Options {
+ Type = Full
+ Start = 2006-12-30 01:00
+ Repeat = 3w
+ }
+ }
+ #Tuesday. Would run Jan 2, Jan 23, Feb 13, etc.
+ Run {
+ Options {
+ Type = Incremental
+ Start = 2007-01-02 01:00
+ Repeat = 3w
+ }
+ }
+ }
+
+ Schedule {
+ Name = "Week 2 Rotation"
+ #Saturday. Would run Jan 6, Jan 27, Feb 17, etc.
+ Run {
+ Options {
+ Type = Full
+ Start = 2007-01-06 01:00
+ Repeat = 3w
+ }
+ }
+ #Tuesday. Would run Jan 9, Jan 30, Feb 20, etc.
+ Run {
+ Options {
+ Type = Incremental
+ Start = 2007-01-09 01:00
+ Repeat = 3w
+ }
+ }
+ }
+
+ Schedule {
+ Name = "Week 3 Rotation"
+ #Saturday. Would run Jan 13, Feb 3, Feb 24, etc.
+ Run {
+ Options {
+ Type = Full
+ Start = 2007-01-13 01:00
+ Repeat = 3w
+ }
+ }
+ #Tuesday. Would run Jan 16, Feb 6, Feb 27, etc.
+ Run {
+ Options {
+ Type = Incremental
+ Start = 2007-01-16 01:00
+ Repeat = 3w
+ }
+ }
+ }
+
+Item 13: Archival (removal) of User Files to Tape
+ Date: Nov. 24/2005
+ Origin: Ray Pengelly [ray at biomed dot queensu dot ca
+ Status:
+
+ What: The ability to archive data to storage based on certain parameters
+ such as age, size, or location. Once the data has been written to
+ storage and logged it is then pruned from the originating
+ filesystem. Note! We are talking about user's files and not
+ Bacula Volumes.
Why: This would allow fully automatic storage management which becomes
useful for large datastores. It would also allow for auto-staging
access time. Then after another 6 months (or possibly as one
storage pool gets full) data is migrated to Tape.
-Item 10: Add Plug-ins to the FileSet Include statements.
+Item 14: Cause daemons to use a specific IP address to source communications
+ Origin: Bill Moran <wmoran@collaborativefusion.com>
+ Date: 18 Dec 2006
+ Status:
+ What: Cause Bacula daemons (dir, fd, sd) to always use the ip address
+ specified in the [DIR|DF|SD]Addr directive as the source IP
+ for initiating communication.
+ Why: On complex networks, as well as extremely secure networks, it's
+ not unusual to have multiple possible routes through the network.
+ Often, each of these routes is secured by different policies
+ (effectively, firewalls allow or deny different traffic depending
+ on the source address)
+ Unfortunately, it can sometimes be difficult or impossible to
+ represent this in a system routing table, as the result is
+ excessive subnetting that quickly exhausts available IP space.
+ The best available workaround is to provide multiple IPs to
+ a single machine that are all on the same subnet. In order
+ for this to work properly, applications must support the ability
+ to bind outgoing connections to a specified address, otherwise
+ the operating system will always choose the first IP that
+ matches the required route.
+ Notes: Many other programs support this. For example, the following
+ can be configured in BIND:
+ query-source address 10.0.0.1;
+ transfer-source 10.0.0.2;
+ Which means queries from this server will always come from
+ 10.0.0.1 and zone transfers will always originate from
+ 10.0.0.2.
+
+Item 15: Multiple threads in file daemon for the same job
+ Date: 27 November 2005
+ Origin: Ove Risberg (Ove.Risberg at octocode dot com)
+ Status:
+
+ What: I want the file daemon to start multiple threads for a backup
+ job so the fastest possible backup can be made.
+
+ The file daemon could parse the FileSet information and start
+ one thread for each File entry located on a separate
+ filesystem.
+
+ A confiuration option in the job section should be used to
+ enable or disable this feature. The confgutration option could
+ specify the maximum number of threads in the file daemon.
+
+ If the theads could spool the data to separate spool files
+ the restore process will not be much slower.
+
+ Why: Multiple concurrent backups of a large fileserver with many
+ disks and controllers will be much faster.
+
+Item 16: Add Plug-ins to the FileSet Include statements.
Date: 28 October 2005
Origin:
Status: Partially coded in 1.37 -- much more to do.
plug-in knows how to backup his Oracle database without
stopping/starting it, for example.
-Item 11: Implement more Python events in Bacula.
- Date: 28 October 2005
- Origin: Kern
- Status:
-
- What: Allow Python scripts to be called at more places
- within Bacula and provide additional access to Bacula
- internal variables.
-
- Why: This will permit users to customize Bacula through
- Python scripts.
+Item 17: Restore only file attributes (permissions, ACL, owner, group...)
+ Origin: Eric Bollengier
+ Date: 30/12/2006
+ Status:
- Notes: Recycle event
- Scratch pool event
- NeedVolume event
- MediaFull event
-
- Also add a way to get a listing of currently running
- jobs (possibly also scheduled jobs).
+ What: The goal of this project is to be able to restore only rights
+ and attributes of files without crushing them.
+ Why: Who have never had to repair a chmod -R 777, or a wild update
+ of recursive right under Windows? At this time, you must have
+ enough space to restore data, dump attributes (easy with acl,
+ more complex with unix/windows rights) and apply them to your
+ broken tree. With this options, it will be very easy to compare
+ right or ACL over the time.
-Item 12: Quick release of FD-SD connection after backup.
+ Notes: If the file is here, we skip restore and we change rights.
+ If the file isn't here, we can create an empty one and apply
+ rights or do nothing.
+Item 18: Quick release of FD-SD connection after backup.
Origin: Frank Volf (frank at deze dot org)
Date: 17 November 2005
- Status:
+ Status: Done -- implemented by Kern -- in CVS 26Jan07
What: In the Bacula implementation a backup is finished after all data
and attributes are successfully written to storage. When using a
Why: Makes backup of laptops much faster.
-
-
-Item 13: Implement huge exclude list support using hashing.
+Item 19: Implement a Python interface to the Bacula catalog.
Date: 28 October 2005
Origin: Kern
Status:
- What: Allow users to specify very large exclude list (currently
- more than about 1000 files is too many).
-
- Why: This would give the users the ability to exclude all
- files that are loaded with the OS (e.g. using rpms
- or debs). If the user can restore the base OS from
- CDs, there is no need to backup all those files. A
- complete restore would be to restore the base OS, then
- do a Bacula restore. By excluding the base OS files, the
- backup set will be *much* smaller.
+ What: Implement an interface for Python scripts to access
+ the catalog through Bacula.
+ Why: This will permit users to customize Bacula through
+ Python scripts.
-Item 14: Allow skipping execution of Jobs
- Date: 29 November 2005
- Origin: Florian Schnabel <florian.schnabel at docufy dot de>
+Item 20: Archive data
+ Date: 15/5/2006
+ Origin: calvin streeting calvin at absentdream dot com
Status:
- What: An easy option to skip a certain job on a certain date.
- Why: You could then easily skip tape backups on holidays. Especially
- if you got no autochanger and can only fit one backup on a tape
- that would be really handy, other jobs could proceed normally
- and you won't get errors that way.
-
+ What: The abilty to archive to media (dvd/cd) in a uncompressed format
+ for dead filing (archiving not backing up)
-Item 15: Tray monitor window cleanups
- Origin: Alan Brown ajb2 at mssl dot ucl dot ac dot uk
- Date: 24 July 2006
- Status:
- What: Resizeable and scrollable windows in the tray monitor.
+ Why: At my works when jobs are finished and moved off of the main file
+ servers (raid based systems) onto a simple linux file server (ide based
+ system) so users can find old information without contacting the IT
+ dept.
- Why: With multiple clients, or with many jobs running, the displayed
- window often ends up larger than the available screen, making
- the trailing items difficult to read.
+ So this data dosn't realy change it only gets added to,
+ But it also needs backing up. At the moment it takes
+ about 8 hours to back up our servers (working data) so
+ rather than add more time to existing backups i am trying
+ to implement a system where we backup the acrhive data to
+ cd/dvd these disks would only need to be appended to
+ (burn only new/changed files to new disks for off site
+ storage). basialy understand the differnce between
+ achive data and live data.
+ Notes: Scan the data and email me when it needs burning divide
+ into predifind chunks keep a recored of what is on what
+ disk make me a label (simple php->mysql=>pdf stuff) i
+ could do this bit ability to save data uncompresed so
+ it can be read in any other system (future proof data)
+ save the catalog with the disk as some kind of menu
+ system
-Item 16: Split documentation
+Item 21: Split documentation
Origin: Maxx <maxxatworkat gmail dot com>
Date: 27th July 2006
Status:
etc.
+Item 22: Implement support for stacking arbitrary stream filters, sinks.
+Date: 23 November 2006
+Origin: Landon Fuller <landonf@threerings.net>
+Status: Planning. Assigned to landonf.
-Item 17: Automatic promotion of backup levels
- Date: 19 January 2006
- Origin: Adam Thornton <athornton@sinenomine.net>
- Status:
-
- What: Amanda has a feature whereby it estimates the space that a
- differential, incremental, and full backup would take. If the
- difference in space required between the scheduled level and the next
- level up is beneath some user-defined critical threshold, the backup
- level is bumped to the next type. Doing this minimizes the number of
- volumes necessary during a restore, with a fairly minimal cost in
- backup media space.
+ What: Implement support for the following:
+ - Stacking arbitrary stream filters (eg, encryption, compression,
+ sparse data handling))
+ - Attaching file sinks to terminate stream filters (ie, write out
+ the resultant data to a file)
+ - Refactor the restoration state machine accordingly
- Why: I know at least one (quite sophisticated and smart) user
- for whom the absence of this feature is a deal-breaker in terms of
- using Bacula; if we had it it would eliminate the one cool thing
- Amanda can do and we can't (at least, the one cool thing I know of).
+ Why: The existing stream implementation suffers from the following:
+ - All state (compression, encryption, stream restoration), is
+ global across the entire restore process, for all streams. There are
+ multiple entry and exit points in the restoration state machine, and
+ thus multiple places where state must be allocated, deallocated,
+ initialized, or reinitialized. This results in exceptional complexity
+ for the author of a stream filter.
+ - The developer must enumerate all possible combinations of filters
+ and stream types (ie, win32 data with encryption, without encryption,
+ with encryption AND compression, etc).
+ Notes: This feature request only covers implementing the stream filters/
+ sinks, and refactoring the file daemon's restoration implementation
+ accordingly. If I have extra time, I will also rewrite the backup
+ implementation. My intent in implementing the restoration first is to
+ solve pressing bugs in the restoration handling, and to ensure that
+ the new restore implementation handles existing backups correctly.
+
+ I do not plan on changing the network or tape data structures to
+ support defining arbitrary stream filters, but supporting that
+ functionality is the ultimate goal.
+
+ Assistance with either code or testing would be fantastic.
+
+Item 23: Implement from-client and to-client on restore command line.
+ Date: 11 December 2006
+ Origin: Discussion on Bacula-users entitled 'Scripted restores to
+ different clients', December 2006
+ Status: New feature request
+
+ What: While using bconsole interactively, you can specify the client
+ that a backup job is to be restored for, and then you can
+ specify later a different client to send the restored files
+ back to. However, using the 'restore' command with all options
+ on the command line, this cannot be done, due to the ambiguous
+ 'client' parameter. Additionally, this parameter means different
+ things depending on if it's specified on the command line or
+ afterwards, in the Modify Job screens.
+
+ Why: This feature would enable restore jobs to be more completely
+ automated, for example by a web or GUI front-end.
+
+ Notes: client can also be implied by specifying the jobid on the command
+ line
-Item 18: Add an override in Schedule for Pools based on backup types.
+Item 24: Add an override in Schedule for Pools based on backup types.
Date: 19 Jan 2005
Origin: Chad Slater <chad.slater@clickfox.com>
Status:
backups, then the Full job would use the proper Storage device, which
has more capacity (i.e. a 8TB tape library.
-Item 19: An option to operate on all pools with update vol parameters
- Origin: Dmitriy Pinchukov <absh@bossdev.kiev.ua>
- Date: 16 August 2006
- Status:
-
- What: When I do update -> Volume parameters -> All Volumes
- from Pool, then I have to select pools one by one. I'd like
- console to have an option like "0: All Pools" in the list of
- defined pools.
-
- Why: I have many pools and therefore unhappy with manually
- updating each of them using update -> Volume parameters -> All
- Volumes from Pool -> pool #.
-
-
+Item 25: Implement huge exclude list support using hashing.
+ Date: 28 October 2005
+ Origin: Kern
+ Status:
-Item 20: Include JobID in spool file name
- Origin: Mark Bergman <mark.bergman@uphs.upenn.edu>
- Date: Tue Aug 22 17:13:39 EDT 2006
- Status: Ok (patches/testing/project-include-jobid-in-spool-name.patch)
+ What: Allow users to specify very large exclude list (currently
+ more than about 1000 files is too many).
- What: Change the name of the spool file to include the JobID
+ Why: This would give the users the ability to exclude all
+ files that are loaded with the OS (e.g. using rpms
+ or debs). If the user can restore the base OS from
+ CDs, there is no need to backup all those files. A
+ complete restore would be to restore the base OS, then
+ do a Bacula restore. By excluding the base OS files, the
+ backup set will be *much* smaller.
- Why: JobIDs are the common key used to refer to jobs, yet the
- spoolfile name doesn't include that information. The date/time
- stamp is useful (and should be retained).
+Item 26: Implement more Python events in Bacula.
+ Date: 28 October 2005
+ Origin: Kern
+ Status:
+ What: Allow Python scripts to be called at more places
+ within Bacula and provide additional access to Bacula
+ internal variables.
+ Why: This will permit users to customize Bacula through
+ Python scripts.
-Item 21: Include timestamp of job launch in "stat clients" output
- Origin: Mark Bergman <mark.bergman@uphs.upenn.edu>
- Date: Tue Aug 22 17:13:39 EDT 2006
- Status:
+ Notes: Recycle event
+ Scratch pool event
+ NeedVolume event
+ MediaFull event
+
+ Also add a way to get a listing of currently running
+ jobs (possibly also scheduled jobs).
- What: The "stat clients" command doesn't include any detail on when
- the active backup jobs were launched.
- Why: Including the timestamp would make it much easier to decide whether
- a job is running properly.
+Item 27: Incorporation of XACML2/SAML2 parsing
+ Date: 19 January 2006
+ Origin: Adam Thornton <athornton@sinenomine.net>
+ Status: Blue sky
- Notes: It may be helpful to have the output from "stat clients" formatted
- more like that from "stat dir" (and other commands), in a column
- format. The per-client information that's currently shown (level,
- client name, JobId, Volume, pool, device, Files, etc.) is good, but
- somewhat hard to parse (both programmatically and visually),
- particularly when there are many active clients.
+ What: XACML is "eXtensible Access Control Markup Language" and
+ "SAML is the "Security Assertion Markup Language"--an XML standard
+ for making statements about identity and authorization. Having these
+ would give us a framework to approach ACLs in a generic manner, and
+ in a way flexible enough to support the four major sorts of ACLs I
+ see as a concern to Bacula at this point, as well as (probably) to
+ deal with new sorts of ACLs that may appear in the future.
+ Why: Bacula is beginning to need to back up systems with ACLs
+ that do not map cleanly onto traditional Unix permissions. I see
+ four sets of ACLs--in general, mutually incompatible with one
+ another--that we're going to need to deal with. These are: NTFS
+ ACLs, POSIX ACLs, NFSv4 ACLS, and AFS ACLS. (Some may question the
+ relevance of AFS; AFS is one of Sine Nomine's core consulting
+ businesses, and having a reputable file-level backup and restore
+ technology for it (as Tivoli is probably going to drop AFS support
+ soon since IBM no longer supports AFS) would be of huge benefit to
+ our customers; we'd most likely create the AFS support at Sine Nomine
+ for inclusion into the Bacula (and perhaps some changes to the
+ OpenAFS volserver) core code.)
+ Now, obviously, Bacula already handles NTFS just fine. However, I
+ think there's a lot of value in implementing a generic ACL model, so
+ that it's easy to support whatever particular instances of ACLs come
+ down the pike: POSIX ACLS (think SELinux) and NFSv4 are the obvious
+ things arriving in the Linux world in a big way in the near future.
+ XACML, although overcomplicated for our needs, provides this
+ framework, and we should be able to leverage other people's
+ implementations to minimize the amount of work *we* have to do to get
+ a generic ACL framework. Basically, the costs of implementation are
+ high, but they're largely both external to Bacula and already sunk.
-Item 22: Message mailing based on backup types
- Origin: Evan Kaufman <evan.kaufman@gmail.com>
- Date: January 6, 2006
- Status:
+Item 28: Filesystem watch triggered backup.
+ Date: 31 August 2006
+ Origin: Jesper Krogh <jesper@krogh.cc>
+ Status: Unimplemented, depends probably on "client initiated backups"
- What: In the "Messages" resource definitions, allowing messages
- to be mailed based on the type (backup, restore, etc.) and level
- (full, differential, etc) of job that created the originating
- message(s).
+ What: With inotify and similar filesystem triggeret notification
+ systems is it possible to have the file-daemon to monitor
+ filesystem changes and initiate backup.
- Why: It would, for example, allow someone's boss to be emailed
- automatically only when a Full Backup job runs, so he can
- retrieve the tapes for offsite storage, even if the IT dept.
- doesn't (or can't) explicitly notify him. At the same time, his
- mailbox wouldnt be filled by notifications of Verifies, Restores,
- or Incremental/Differential Backups (which would likely be kept
- onsite).
+ Why: There are 2 situations where this is nice to have.
+ 1) It is possible to get a much finer-grained backup than
+ the fixed schedules used now.. A file created and deleted
+ a few hours later, can automatically be caught.
- Notes: One way this could be done is through additional message types, for example:
+ 2) The introduced load on the system will probably be
+ distributed more even on the system.
- Messages {
- # email the boss only on full system backups
- Mail = boss@mycompany.com = full, !incremental, !differential, !restore,
- !verify, !admin
- # email us only when something breaks
- MailOnError = itdept@mycompany.com = all
- }
+ Notes: This can be combined with configration that specifies
+ something like: "at most every 15 minutes or when changes
+ consumed XX MB".
+Kern Notes: I would rather see this implemented by an external program
+ that monitors the Filesystem changes, then uses the console
+ to start the appropriate job.
-Item 23: Allow inclusion/exclusion of files in a fileset by creation/mod times
+Item 29: Allow inclusion/exclusion of files in a fileset by creation/mod times
Origin: Evan Kaufman <evan.kaufman@gmail.com>
Date: January 11, 2006
Status:
or 'since'.
-Item 24: Add a scheduling syntax that permits weekly rotations
- Date: 15 December 2006
- Origin: Gregory Brauer (greg at wildbrain dot com)
+Item 30: Tray monitor window cleanups
+ Origin: Alan Brown ajb2 at mssl dot ucl dot ac dot uk
+ Date: 24 July 2006
Status:
+ What: Resizeable and scrollable windows in the tray monitor.
- What: Currently, Bacula only understands how to deal with weeks of the
- month or weeks of the year in schedules. This makes it impossible
- to do a true weekly rotation of tapes. There will always be a
- discontinuity that will require disruptive manual intervention at
- least monthly or yearly because week boundaries never align with
- month or year boundaries.
+ Why: With multiple clients, or with many jobs running, the displayed
+ window often ends up larger than the available screen, making
+ the trailing items difficult to read.
- A solution would be to add a new syntax that defines (at least)
- a start timestamp, and repetition period.
- Why: Rotated backups done at weekly intervals are useful, and Bacula
- cannot currently do them without extensive hacking.
+Item 31: Implement multiple numeric backup levels as supported by dump
+Date: 3 April 2006
+Origin: Daniel Rich <drich@employees.org>
+Status:
+What: Dump allows specification of backup levels numerically instead of just
+ "full", "incr", and "diff". In this system, at any given level, all
+ files are backed up that were were modified since the last backup of a
+ higher level (with 0 being the highest and 9 being the lowest). A
+ level 0 is therefore equivalent to a full, level 9 an incremental, and
+ the levels 1 through 8 are varying levels of differentials. For
+ bacula's sake, these could be represented as "full", "incr", and
+ "diff1", "diff2", etc.
- Notes: Here is an example syntax showing a 3-week rotation where full
- Backups would be performed every week on Saturday, and an
- incremental would be performed every week on Tuesday. Each
- set of tapes could be removed from the loader for the following
- two cycles before coming back and being reused on the third
- week. Since the execution times are determined by intervals
- from a given point in time, there will never be any issues with
- having to adjust to any sort of arbitrary time boundary. In
- the example provided, I even define the starting schedule
- as crossing both a year and a month boundary, but the run times
- would be based on the "Repeat" value and would therefore happen
- weekly as desired.
+Why: Support of multiple backup levels would provide for more advanced backup
+ rotation schemes such as "Towers of Hanoi". This would allow better
+ flexibility in performing backups, and can lead to shorter recover
+ times.
+Notes: Legato Networker supports a similar system with full, incr, and 1-9 as
+ levels.
+
+Item 32: Automatic promotion of backup levels
+ Date: 19 January 2006
+ Origin: Adam Thornton <athornton@sinenomine.net>
+ Status:
- Schedule {
- Name = "Week 1 Rotation"
- #Saturday. Would run Dec 30, Jan 20, Feb 10, etc.
- Run {
- Options {
- Type = Full
- Start = 2006-12-30 01:00
- Repeat = 3w
- }
- }
- #Tuesday. Would run Jan 2, Jan 23, Feb 13, etc.
- Run {
- Options {
- Type = Incremental
- Start = 2007-01-02 01:00
- Repeat = 3w
- }
- }
- }
-
- Schedule {
- Name = "Week 2 Rotation"
- #Saturday. Would run Jan 6, Jan 27, Feb 17, etc.
- Run {
- Options {
- Type = Full
- Start = 2007-01-06 01:00
- Repeat = 3w
- }
- }
- #Tuesday. Would run Jan 9, Jan 30, Feb 20, etc.
- Run {
- Options {
- Type = Incremental
- Start = 2007-01-09 01:00
- Repeat = 3w
- }
- }
- }
-
- Schedule {
- Name = "Week 3 Rotation"
- #Saturday. Would run Jan 13, Feb 3, Feb 24, etc.
- Run {
- Options {
- Type = Full
- Start = 2007-01-13 01:00
- Repeat = 3w
- }
- }
- #Tuesday. Would run Jan 16, Feb 6, Feb 27, etc.
- Run {
- Options {
- Type = Incremental
- Start = 2007-01-16 01:00
- Repeat = 3w
- }
- }
- }
-
-
-Item 25: Improve Bacula's tape and drive usage and cleaning management.
- Date: 8 November 2005, November 11, 2005
- Origin: Adam Thornton <athornton at sinenomine dot net>,
- Arno Lehmann <al at its-lehmann dot de>
- Status:
-
- What: Make Bacula manage tape life cycle information, tape reuse
- times and drive cleaning cycles.
-
- Why: All three parts of this project are important when operating
- backups.
- We need to know which tapes need replacement, and we need to
- make sure the drives are cleaned when necessary. While many
- tape libraries and even autoloaders can handle all this
- automatically, support by Bacula can be helpful for smaller
- (older) libraries and single drives. Limiting the number of
- times a tape is used might prevent tape errors when using
- tapes until the drives can't read it any more. Also, checking
- drive status during operation can prevent some failures (as I
- [Arno] had to learn the hard way...)
-
- Notes: First, Bacula could (and even does, to some limited extent)
- record tape and drive usage. For tapes, the number of mounts,
- the amount of data, and the time the tape has actually been
- running could be recorded. Data fields for Read and Write
- time and Number of mounts already exist in the catalog (I'm
- not sure if VolBytes is the sum of all bytes ever written to
- that volume by Bacula). This information can be important
- when determining which media to replace. The ability to mark
- Volumes as "used up" after a given number of write cycles
- should also be implemented so that a tape is never actually
- worn out. For the tape drives known to Bacula, similar
- information is interesting to determine the device status and
- expected life time: Time it's been Reading and Writing, number
- of tape Loads / Unloads / Errors. This information is not yet
- recorded as far as I [Arno] know. A new volume status would
- be necessary for the new state, like "Used up" or "Worn out".
- Volumes with this state could be used for restores, but not
- for writing. These volumes should be migrated first (assuming
- migration is implemented) and, once they are no longer needed,
- could be moved to a Trash pool.
-
- The next step would be to implement a drive cleaning setup.
- Bacula already has knowledge about cleaning tapes. Once it
- has some information about cleaning cycles (measured in drive
- run time, number of tapes used, or calender days, for example)
- it can automatically execute tape cleaning (with an
- autochanger, obviously) or ask for operator assistance loading
- a cleaning tape.
-
- The final step would be to implement TAPEALERT checks not only
- when changing tapes and only sending the information to the
- administrator, but rather checking after each tape error,
- checking on a regular basis (for example after each tape
- file), and also before unloading and after loading a new tape.
- Then, depending on the drives TAPEALERT state and the known
- drive cleaning state Bacula could automatically schedule later
- cleaning, clean immediately, or inform the operator.
-
- Implementing this would perhaps require another catalog change
- and perhaps major changes in SD code and the DIR-SD protocol,
- so I'd only consider this worth implementing if it would
- actually be used or even needed by many people.
-
- Implementation of these projects could happen in three distinct
- sub-projects: Measuring Tape and Drive usage, retiring
- volumes, and handling drive cleaning and TAPEALERTs.
-
-Item 26: Implement support for stacking arbitrary stream filters, sinks.
-Date: 23 November 2006
-Origin: Landon Fuller <landonf@threerings.net>
-Status: Planning. Assigned to landonf.
-
- What: Implement support for the following:
- - Stacking arbitrary stream filters (eg, encryption, compression,
- sparse data handling))
- - Attaching file sinks to terminate stream filters (ie, write out
- the resultant data to a file)
- - Refactor the restoration state machine accordingly
-
- Why: The existing stream implementation suffers from the following:
- - All state (compression, encryption, stream restoration), is
- global across the entire restore process, for all streams. There are
- multiple entry and exit points in the restoration state machine, and
- thus multiple places where state must be allocated, deallocated,
- initialized, or reinitialized. This results in exceptional complexity
- for the author of a stream filter.
- - The developer must enumerate all possible combinations of filters
- and stream types (ie, win32 data with encryption, without encryption,
- with encryption AND compression, etc).
-
- Notes: This feature request only covers implementing the stream filters/
- sinks, and refactoring the file daemon's restoration implementation
- accordingly. If I have extra time, I will also rewrite the backup
- implementation. My intent in implementing the restoration first is to
- solve pressing bugs in the restoration handling, and to ensure that
- the new restore implementation handles existing backups correctly.
-
- I do not plan on changing the network or tape data structures to
- support defining arbitrary stream filters, but supporting that
- functionality is the ultimate goal.
-
- Assistance with either code or testing would be fantastic.
-
-Item 27: Allow FD to initiate a backup
- Origin: Frank Volf (frank at deze dot org)
- Date: 17 November 2005
- Status:
-
- What: Provide some means, possibly by a restricted console that
- allows a FD to initiate a backup, and that uses the connection
- established by the FD to the Director for the backup so that
- a Director that is firewalled can do the backup.
-
- Why: Makes backup of laptops much easier.
-
-Item 28: Directive/mode to backup only file changes, not entire file
- Date: 11 November 2005
- Origin: Joshua Kugler <joshua dot kugler at uaf dot edu>
- Marek Bajon <mbajon at bimsplus dot com dot pl>
- Status:
-
- What: Currently when a file changes, the entire file will be backed up in
- the next incremental or full backup. To save space on the tapes
- it would be nice to have a mode whereby only the changes to the
- file would be backed up when it is changed.
-
- Why: This would save lots of space when backing up large files such as
- logs, mbox files, Outlook PST files and the like.
-
- Notes: This would require the usage of disk-based volumes as comparing
- files would not be feasible using a tape drive.
-
-Item 29: Automatic disabling of devices
- Date: 2005-11-11
- Origin: Peter Eriksson <peter at ifm.liu dot se>
- Status:
-
- What: After a configurable amount of fatal errors with a tape drive
- Bacula should automatically disable further use of a certain
- tape drive. There should also be "disable"/"enable" commands in
- the "bconsole" tool.
-
- Why: On a multi-drive jukebox there is a possibility of tape drives
- going bad during large backups (needing a cleaning tape run,
- tapes getting stuck). It would be advantageous if Bacula would
- automatically disable further use of a problematic tape drive
- after a configurable amount of errors has occurred.
-
- An example: I have a multi-drive jukebox (6 drives, 380+ slots)
- where tapes occasionally get stuck inside the drive. Bacula will
- notice that the "mtx-changer" command will fail and then fail
- any backup jobs trying to use that drive. However, it will still
- keep on trying to run new jobs using that drive and fail -
- forever, and thus failing lots and lots of jobs... Since we have
- many drives Bacula could have just automatically disabled
- further use of that drive and used one of the other ones
- instead.
-
-Item 30: Incorporation of XACML2/SAML2 parsing
- Date: 19 January 2006
- Origin: Adam Thornton <athornton@sinenomine.net>
- Status: Blue sky
-
- What: XACML is "eXtensible Access Control Markup Language" and
- "SAML is the "Security Assertion Markup Language"--an XML standard
- for making statements about identity and authorization. Having these
- would give us a framework to approach ACLs in a generic manner, and
- in a way flexible enough to support the four major sorts of ACLs I
- see as a concern to Bacula at this point, as well as (probably) to
- deal with new sorts of ACLs that may appear in the future.
-
- Why: Bacula is beginning to need to back up systems with ACLs
- that do not map cleanly onto traditional Unix permissions. I see
- four sets of ACLs--in general, mutually incompatible with one
- another--that we're going to need to deal with. These are: NTFS
- ACLs, POSIX ACLs, NFSv4 ACLS, and AFS ACLS. (Some may question the
- relevance of AFS; AFS is one of Sine Nomine's core consulting
- businesses, and having a reputable file-level backup and restore
- technology for it (as Tivoli is probably going to drop AFS support
- soon since IBM no longer supports AFS) would be of huge benefit to
- our customers; we'd most likely create the AFS support at Sine Nomine
- for inclusion into the Bacula (and perhaps some changes to the
- OpenAFS volserver) core code.)
-
- Now, obviously, Bacula already handles NTFS just fine. However, I
- think there's a lot of value in implementing a generic ACL model, so
- that it's easy to support whatever particular instances of ACLs come
- down the pike: POSIX ACLS (think SELinux) and NFSv4 are the obvious
- things arriving in the Linux world in a big way in the near future.
- XACML, although overcomplicated for our needs, provides this
- framework, and we should be able to leverage other people's
- implementations to minimize the amount of work *we* have to do to get
- a generic ACL framework. Basically, the costs of implementation are
- high, but they're largely both external to Bacula and already sunk.
+ What: Amanda has a feature whereby it estimates the space that a
+ differential, incremental, and full backup would take. If the
+ difference in space required between the scheduled level and the next
+ level up is beneath some user-defined critical threshold, the backup
+ level is bumped to the next type. Doing this minimizes the number of
+ volumes necessary during a restore, with a fairly minimal cost in
+ backup media space.
+ Why: I know at least one (quite sophisticated and smart) user
+ for whom the absence of this feature is a deal-breaker in terms of
+ using Bacula; if we had it it would eliminate the one cool thing
+ Amanda can do and we can't (at least, the one cool thing I know of).
-Item 31: Clustered file-daemons
+Item 33: Clustered file-daemons
Origin: Alan Brown ajb2 at mssl dot ucl dot ac dot uk
Date: 24 July 2006
Status:
Notes:
-Item 32: Commercial database support
+Item 34: Commercial database support
Origin: Russell Howe <russell_howe dot wreckage dot org>
Date: 26 July 2006
Status:
properly specced database server for storing Bacula's catalog, rather
than having to run a second DBMS.
-
-Item 33: Archive data
- Date: 15/5/2006
- Origin: calvin streeting calvin at absentdream dot com
- Status:
-
- What: The abilty to archive to media (dvd/cd) in a uncompressed format
- for dead filing (archiving not backing up)
-
- Why: At my works when jobs are finished and moved off of the main file
- servers (raid based systems) onto a simple linux file server (ide based
- system) so users can find old information without contacting the IT
- dept.
-
- So this data dosn't realy change it only gets added to,
- But it also needs backing up. At the moment it takes
- about 8 hours to back up our servers (working data) so
- rather than add more time to existing backups i am trying
- to implement a system where we backup the acrhive data to
- cd/dvd these disks would only need to be appended to
- (burn only new/changed files to new disks for off site
- storage). basialy understand the differnce between
- achive data and live data.
-
- Notes: Scan the data and email me when it needs burning divide
- into predifind chunks keep a recored of what is on what
- disk make me a label (simple php->mysql=>pdf stuff) i
- could do this bit ability to save data uncompresed so
- it can be read in any other system (future proof data)
- save the catalog with the disk as some kind of menu
- system
-
-Item 34: Filesystem watch triggered backup.
- Date: 31 August 2006
- Origin: Jesper Krogh <jesper@krogh.cc>
- Status: Unimplemented, depends probably on "client initiated backups"
-
- What: With inotify and similar filesystem triggeret notification
- systems is it possible to have the file-daemon to monitor
- filesystem changes and initiate backup.
-
- Why: There are 2 situations where this is nice to have.
- 1) It is possible to get a much finer-grained backup than
- the fixed schedules used now.. A file created and deleted
- a few hours later, can automatically be caught.
-
- 2) The introduced load on the system will probably be
- distributed more even on the system.
-
- Notes: This can be combined with configration that specifies
- something like: "at most every 15 minutes or when changes
- consumed XX MB".
-
-Kern Notes: I would rather see this implemented by an external program
- that monitors the Filesystem changes, then uses the console
- to start the appropriate job.
-
-Item 35: Implement multiple numeric backup levels as supported by dump
-Date: 3 April 2006
-Origin: Daniel Rich <drich@employees.org>
-Status:
-What: Dump allows specification of backup levels numerically instead of just
- "full", "incr", and "diff". In this system, at any given level, all
- files are backed up that were were modified since the last backup of a
- higher level (with 0 being the highest and 9 being the lowest). A
- level 0 is therefore equivalent to a full, level 9 an incremental, and
- the levels 1 through 8 are varying levels of differentials. For
- bacula's sake, these could be represented as "full", "incr", and
- "diff1", "diff2", etc.
-
-Why: Support of multiple backup levels would provide for more advanced backup
- rotation schemes such as "Towers of Hanoi". This would allow better
- flexibility in performing backups, and can lead to shorter recover
- times.
-
-Notes: Legato Networker supports a similar system with full, incr, and 1-9 as
- levels.
-
-Item 36: Implement a server-side compression feature
- Date: 18 December 2006
- Origin: Vadim A. Umanski , e-mail umanski@ext.ru
- Status:
- What: The ability to compress backup data on server receiving data
- instead of doing that on client sending data.
- Why: The need is practical. I've got some machines that can send
- data to the network 4 or 5 times faster than compressing
- them (I've measured that). They're using fast enough SCSI/FC
- disk subsystems but rather slow CPUs (ex. UltraSPARC II).
- And the backup server has got a quite fast CPUs (ex. Dual P4
- Xeons) and quite a low load. When you have 20, 50 or 100 GB
- of raw data - running a job 4 to 5 times faster - that
- really matters. On the other hand, the data can be
- compressed 50% or better - so losing twice more space for
- disk backup is not good at all. And the network is all mine
- (I have a dedicated management/provisioning network) and I
- can get as high bandwidth as I need - 100Mbps, 1000Mbps...
- That's why the server-side compression feature is needed!
- Notes:
-
-Item 37: Cause daemons to use a specific IP address to source communications
- Origin: Bill Moran <wmoran@collaborativefusion.com>
- Date: 18 Dec 2006
- Status:
- What: Cause Bacula daemons (dir, fd, sd) to always use the ip address
- specified in the [DIR|DF|SD]Addr directive as the source IP
- for initiating communication.
- Why: On complex networks, as well as extremely secure networks, it's
- not unusual to have multiple possible routes through the network.
- Often, each of these routes is secured by different policies
- (effectively, firewalls allow or deny different traffic depending
- on the source address)
- Unfortunately, it can sometimes be difficult or impossible to
- represent this in a system routing table, as the result is
- excessive subnetting that quickly exhausts available IP space.
- The best available workaround is to provide multiple IPs to
- a single machine that are all on the same subnet. In order
- for this to work properly, applications must support the ability
- to bind outgoing connections to a specified address, otherwise
- the operating system will always choose the first IP that
- matches the required route.
- Notes: Many other programs support this. For example, the following
- can be configured in BIND:
- query-source address 10.0.0.1;
- transfer-source 10.0.0.2;
- Which means queries from this server will always come from
- 10.0.0.1 and zone transfers will always originate from
- 10.0.0.2.
-
-Item 38: Multiple threads in file daemon for the same job
- Date: 27 November 2005
- Origin: Ove Risberg (Ove.Risberg at octocode dot com)
+Item 35: Automatic disabling of devices
+ Date: 2005-11-11
+ Origin: Peter Eriksson <peter at ifm.liu dot se>
Status:
- What: I want the file daemon to start multiple threads for a backup
- job so the fastest possible backup can be made.
-
- The file daemon could parse the FileSet information and start
- one thread for each File entry located on a separate
- filesystem.
-
- A confiuration option in the job section should be used to
- enable or disable this feature. The confgutration option could
- specify the maximum number of threads in the file daemon.
+ What: After a configurable amount of fatal errors with a tape drive
+ Bacula should automatically disable further use of a certain
+ tape drive. There should also be "disable"/"enable" commands in
+ the "bconsole" tool.
- If the theads could spool the data to separate spool files
- the restore process will not be much slower.
+ Why: On a multi-drive jukebox there is a possibility of tape drives
+ going bad during large backups (needing a cleaning tape run,
+ tapes getting stuck). It would be advantageous if Bacula would
+ automatically disable further use of a problematic tape drive
+ after a configurable amount of errors has occurred.
- Why: Multiple concurrent backups of a large fileserver with many
- disks and controllers will be much faster.
+ An example: I have a multi-drive jukebox (6 drives, 380+ slots)
+ where tapes occasionally get stuck inside the drive. Bacula will
+ notice that the "mtx-changer" command will fail and then fail
+ any backup jobs trying to use that drive. However, it will still
+ keep on trying to run new jobs using that drive and fail -
+ forever, and thus failing lots and lots of jobs... Since we have
+ many drives Bacula could have just automatically disabled
+ further use of that drive and used one of the other ones
+ instead.
-Item 39: Restore only file attributes (permissions, ACL, owner, group...)
- Origin: Eric Bollengier
- Date: 30/12/2006
+Item 36: An option to operate on all pools with update vol parameters
+ Origin: Dmitriy Pinchukov <absh@bossdev.kiev.ua>
+ Date: 16 August 2006
Status:
- What: The goal of this project is to be able to restore only rights
- and attributes of files without crushing them.
-
- Why: Who have never had to repair a chmod -R 777, or a wild update
- of recursive right under Windows? At this time, you must have
- enough space to restore data, dump attributes (easy with acl,
- more complex with unix/windows rights) and apply them to your
- broken tree. With this options, it will be very easy to compare
- right or ACL over the time.
+ What: When I do update -> Volume parameters -> All Volumes
+ from Pool, then I have to select pools one by one. I'd like
+ console to have an option like "0: All Pools" in the list of
+ defined pools.
- Notes: If the file is here, we skip restore and we change rights.
- If the file isn't here, we can create an empty one and apply
- rights or do nothing.
+ Why: I have many pools and therefore unhappy with manually
+ updating each of them using update -> Volume parameters -> All
+ Volumes from Pool -> pool #.
-Item 40: Add an item to the restore option where you can select a pool
+Item 37: Add an item to the restore option where you can select a pool
Origin: kshatriyak at gmail dot com
Date: 1/1/2006
Status:
when you have 2 pools is to manually search for the right
job-id's and enter them by hand, which is a bit fault tolerant.
+Item 38: Include timestamp of job launch in "stat clients" output
+ Origin: Mark Bergman <mark.bergman@uphs.upenn.edu>
+ Date: Tue Aug 22 17:13:39 EDT 2006
+ Status:
+
+ What: The "stat clients" command doesn't include any detail on when
+ the active backup jobs were launched.
+
+ Why: Including the timestamp would make it much easier to decide whether
+ a job is running properly.
+
+ Notes: It may be helpful to have the output from "stat clients" formatted
+ more like that from "stat dir" (and other commands), in a column
+ format. The per-client information that's currently shown (level,
+ client name, JobId, Volume, pool, device, Files, etc.) is good, but
+ somewhat hard to parse (both programmatically and visually),
+ particularly when there are many active clients.
+
+
+Item 39: Message mailing based on backup types
+ Origin: Evan Kaufman <evan.kaufman@gmail.com>
+ Date: January 6, 2006
+ Status:
+
+ What: In the "Messages" resource definitions, allowing messages
+ to be mailed based on the type (backup, restore, etc.) and level
+ (full, differential, etc) of job that created the originating
+ message(s).
+
+ Why: It would, for example, allow someone's boss to be emailed
+ automatically only when a Full Backup job runs, so he can
+ retrieve the tapes for offsite storage, even if the IT dept.
+ doesn't (or can't) explicitly notify him. At the same time, his
+ mailbox wouldnt be filled by notifications of Verifies, Restores,
+ or Incremental/Differential Backups (which would likely be kept
+ onsite).
+
+ Notes: One way this could be done is through additional message types, for example:
+
+ Messages {
+ # email the boss only on full system backups
+ Mail = boss@mycompany.com = full, !incremental, !differential, !restore,
+ !verify, !admin
+ # email us only when something breaks
+ MailOnError = itdept@mycompany.com = all
+ }
+
+
+Item 40: Include JobID in spool file name ****DONE****
+ Origin: Mark Bergman <mark.bergman@uphs.upenn.edu>
+ Date: Tue Aug 22 17:13:39 EDT 2006
+ Status: Done. (patches/testing/project-include-jobid-in-spool-name.patch)
+ No need to vote for this item.
+
+ What: Change the name of the spool file to include the JobID
+
+ Why: JobIDs are the common key used to refer to jobs, yet the
+ spoolfile name doesn't include that information. The date/time
+ stamp is useful (and should be retained).
+
============= Empty Feature Request form ===========
Item n: One line summary ...
Date: Date submitted
projects / bacula / bacula / commitdiff