This doesn't seem to make any sense.
Change-Id: I272de0ea3c0e86cc9a798cbd864050aaa597c3f0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/3933
Tested-by: jenkins
LOG_INFO("JTAG and SWD modes enabled");
else
LOG_INFO("JTAG only mode enabled (specify swclk and swdio gpio to add SWD mode)");
- if (!is_gpio_valid(trst_gpio) && !is_gpio_valid(srst_gpio)) {
- LOG_ERROR("Require at least one of trst or srst gpios to be specified");
- return ERROR_JTAG_INIT_FAILED;
- }
} else if (bcm2835gpio_swd_mode_possible()) {
LOG_INFO("SWD only mode enabled (specify tck, tms, tdi and tdo gpios to add JTAG mode)");
} else {
LOG_INFO("JTAG and SWD modes enabled");
else
LOG_INFO("JTAG only mode enabled (specify swclk and swdio gpio to add SWD mode)");
- if (!is_gpio_valid(trst_gpio) && !is_gpio_valid(srst_gpio)) {
- LOG_ERROR("Require at least one of trst or srst gpios to be specified");
- return ERROR_JTAG_INIT_FAILED;
- }
} else if (sysfsgpio_swd_mode_possible()) {
LOG_INFO("SWD only mode enabled (specify tck, tms, tdi and tdo gpios to add JTAG mode)");
} else {