+++ /dev/null
-build
-bin
-test.out
-wierd-files
+++ /dev/null
- Bacula Regression
- Kern Sibbald
- April 2003
-
-This is Bacula's regression script directory.
-
-To set it up, first edit Makefile and set BACULA-SOURCE to point
-to your source.
-
-Second, make sure that depkgs is in the parent directory of this
-directory (i.e. at the same level) and that it is pre-built.
-
-Then do:
-
- make setup
-
-You run the above one time.
-
-Then you can run any of the tests in the tests subdirectory.
-Each test whose name ends in -root requires you to be root for
-a resonable run. Each test is totally independent of any other
-test. Aside from the required "make setup", each test is totally
-self-initalizing and should clean up after itself.
-
-Not all the tests yet report OK. This is simply because there are
-some spurious differences that I haven't yet taken the time to
-eliminate. The working scrips as of 24 Apr 03 are:
-
-backup-bacula-test
-sparse-test
-compressed-test
-sparse-compressed-test
-two-jobs-test
-wierd-files-test
-
-The tests expect you to execute them from the main regress
-directory!
-
-You can run them individually as:
-
- tests/two-jobs-test
-
-or all tests:
-
- su
- ./all-tests
-
-or all non-root tests
-
- ./all-non-root-tests
-
-after running the root tests, while still root, it is a good idea
-to do:
-
- make reset
-
-this cleans up any files that may be created with root permissions.
+++ /dev/null
-#!/bin/sh
-#
-# Run all tests
-#
-tests/test0
-tests/backup-bacula-test
-tests/sparse-test
-tests/compressed-test
-tests/sparse-compressed-test
-tests/wierd-files-test
-tests/two-jobs-test
-echo " "
-echo " "
-echo "Test results"
-echo " "
-cat test.out
+++ /dev/null
-#!/bin/sh
-#
-# Run all tests
-#
-tests/test0
-tests/backup-bacula-test
-tests/sparse-test
-tests/compressed-test
-tests/sparse-compressed-test
-tests/wierd-files-test
-tests/two-jobs-test
-tests/dev-test-root
-tests/etc-test-root
-tests/lib-test-root
-cat test.out
+++ /dev/null
-bacula-dir.conf
-bacula-fd.conf
-bacula-sd.conf
-console.conf
-test-bacula-dir.conf
-test-bacula-fd.conf
-test-bacula-sd.conf
-test-console.conf
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/console.conf bin/console.conf
+++ /dev/null
-#!/bin/sh
-/bin/cp -f scripts/test-bacula-dir.conf bin/bacula-dir.conf
-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf
-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf
-/bin/cp -f scripts/test-console.conf bin/console.conf
+++ /dev/null
-#!/bin/sh
-out="/tmp/sed_tmp"
-cwd=`pwd`
-# Create sed command script
-echo "s%@sbindir@%${cwd}/bin%g" >${out}
-echo "s%@scriptdir@%${cwd}/bin%g" >>${out}
-echo "s%@working_dir@%${cwd}/bin/working%g" >>${out}
-echo "s%@piddir@%${cwd}/bin/working%g" >>${out}
-echo "s%@subsysdir@%${cwd}/bin/working%g" >>${out}
-
-# process .in files with sed script
-sed -f ${out} ${cwd}/scripts/test-bacula-dir.conf.in >${cwd}/scripts/test-bacula-dir.conf
-sed -f ${out} ${cwd}/scripts/test-bacula-fd.conf.in >${cwd}/scripts/test-bacula-fd.conf
-sed -f ${out} ${cwd}/scripts/test-bacula-sd.conf.in >${cwd}/scripts/test-bacula-sd.conf
-sed -f ${out} ${cwd}/scripts/test-console.conf.in >${cwd}/scripts/test-console.conf
-
-rm -f ${out}
+++ /dev/null
-dev/ptmx
-dev/pts
-dev/rd/c5d2
-dev/rd
-dev/shm
+++ /dev/null
-etc/mail/statistics
+++ /dev/null
-lib/ld-2.2.5.so
-lib/libtermcap.so.2.0.8
-lib/libc-2.2.5.so
-lib/libnsl-2.2.5.so
-lib/libnss_files-2.2.5.so
+++ /dev/null
-#!/bin/sh
-#
-# This is the configuration script for regression testing
-#
-
-CFLAGS="-g -O2 -Wall" \
- ./configure \
- --sbindir=$1/bin \
- --sysconfdir=$1/bin \
- --with-pid-dir=$1/bin/working \
- --with-subsys-dir=$1/bin/working \
- --enable-smartalloc \
- --with-sqlite=$1/../depkgs/sqlite \
- --with-working-dir=$1/bin/working \
- --with-dump-email=kern+ok@sibbald.com \
- --with-job-email=kern+ok@sibbald.com \
- --with-baseport=8101
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#
-# Script to setup running Bacula regression tests
-#
-cwd=`pwd`
-if [ $# != 1 ] ; then
- echo "Arg 1 must be a Bacula release directory."
- echo " "
- exit 1
-fi
-if [ ! -d $1 ] ; then
- echo "Arg 1 must be a Bacula release directory."
- echo " "
- exit 1
-fi
-if [ ! -d ../depkgs ] ; then
- cd ..
- cwd=`pwd`
- echo "The regression scripts require ${cwd}/depkgs but not found!"
- echo " "
- exit 1
-fi
-rm -rf build bin
-cp -rp $1 build
-cp scripts/regress-config build
-cd build
-./regress-config ${cwd}
-make
-make install
-cp src/tools/testls ../bin
-
-cd ..
-bin/bacula stop
-bin/create_sqlite_database
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/bacula stop
-#
-# Save Bacula default conf files for later use
-#
-cp -f bin/*.conf scripts
-scripts/do_sed
+++ /dev/null
-#
-# Default Bacula Director Configuration file
-#
-# The only thing that MUST be changed is to add one or more
-# file or directory names in the Include directive of the
-# FileSet resource.
-#
-# For Bacula release 1.30 (12 April 2003) -- redhat 7.3
-#
-# You might also want to change the default email address
-# from root to your address. See the "mail" and "operator"
-# directives in the Messages resource.
-#
-
-Director { # define myself
- Name = rufus-dir
- DIRport = 8101 # where we listen for UA connections
- QueryFile = "@scriptdir@/query.sql"
- WorkingDirectory = "@working_dir@"
- PidDirectory = "@piddir@"
- SubSysDirectory = "@subsysdir@"
- Maximum Concurrent Jobs = 1
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3" # Console password
- Messages = Standard
-}
-
-#
-# Define the main nightly save backup job
-# By default, this job will back up to disk in /tmp
-Job {
- Name = "NightlySave"
- Type = Backup
- Client=rufus-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "SparseTest"
- Type = Backup
- Client=rufus-fd
- FileSet="SparseSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "CompressedTest"
- Type = Backup
- Client=rufus-fd
- FileSet="CompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-Job {
- Name = "SparseCompressedTest"
- Type = Backup
- Client=rufus-fd
- FileSet="SparseCompressedSet"
- Storage = File
- Messages = Standard
- Pool = Default
- Write Bootstrap = "@working_dir@/NightlySave.bsr"
-}
-
-
-
-
-# Backup the catalog database (after the nightly save)
-Job {
- Name = "BackupCatalog"
- Type = Backup
- Client=rufus-fd
- FileSet="Catalog"
-# Schedule = "WeeklyCycleAfterBackup"
- Storage = File
- Messages = Standard
- Pool = Default
- # This creates an ASCII copy of the catalog
- RunBeforeJob = "@sbindir@/make_catalog_backup -u bacula"
- # This deletes the copy of the catalog
- RunAfterJob = "@sbindir@/delete_catalog_backup"
- Write Bootstrap = "@working_dir@/BackupCatalog.bsr"
-}
-
-# Standard Restore template, to be changed by Console program
-Job {
- Name = "RestoreFiles"
- Type = Restore
- Client=rufus-fd
- FileSet="Full Set"
- Storage = File
- Messages = Standard
- Pool = Default
- Where = /tmp/bacula-restores
-}
-
-
-# List of files to be backed up
-FileSet {
- Name = "Full Set"
- Include = signature=MD5 {
- </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseSet"
- Include = signature=MD5 sparse=yes {
- </tmp/file-list
- }
-}
-
-FileSet {
- Name = "CompressedSet"
- Include = signature=MD5 compression=GZIP {
- </tmp/file-list
- }
-}
-
-FileSet {
- Name = "SparseCompressedSet"
- Include = signature=MD5 compression=GZIP {
- </tmp/file-list
- }
-}
-
-
-
-#
-# When to do the backups, full backup on first sunday of the month,
-# differential (i.e. incremental since full) every other sunday,
-# and incremental backups other days
-Schedule {
- Name = "WeeklyCycle"
- Run = Full 1st sun at 1:05
- Run = Differential 2nd-5th sun at 1:05
- Run = Incremental mon-sat at 1:05
-}
-
-# This schedule does the catalog. It starts after the WeeklyCycle
-Schedule {
- Name = "WeeklyCycleAfterBackup"
- Run = Full sun-sat at 1:10
-}
-
-# This is the backup of the catalog
-FileSet {
- Name = "Catalog"
- Include = signature=MD5 {
- /home/kern/bacula/regress/bin/working/bacula.sql
- }
-}
-
-# Client (File Services) to backup
-Client {
- Name = rufus-fd
- Address = rufus
- FDPort = 8102
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
-}
-
-# Definiton of file storage device
-Storage {
- Name = File
- Address = rufus # N.B. Use a fully qualified name here
- SDPort = 8103
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
- Device = FileStorage
- Media Type = File
-}
-
-# Definition of DLT tape storage device
-#Storage {
-# Name = DLTDrive
-# Address = rufus # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = "HP DLT 80" # must be same as Device in Storage daemon
-# Media Type = DLT8000 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of DDS tape storage device
-#Storage {
-# Name = SDT-10000
-# Address = rufus # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
-# Device = SDT-10000 # must be same as Device in Storage daemon
-# Media Type = DDS-4 # must be same as MediaType in Storage daemon
-#}
-
-# Definition of 8mm tape storage device
-#Storage {
-# Name = "8mmDrive"
-# Address = rufus # N.B. Use a fully qualified name here
-# SDPort = 8103
-# Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-# Device = "Exabyte 8mm"
-# MediaType = "8mm"
-#}
-
-
-# Generic catalog service
-Catalog {
- Name = MyCatalog
- dbname = bacula; user = bacula; password = ""
-}
-
-# Reasonable message delivery -- send most everything to email address
-# and to the console
-Messages {
- Name = Standard
- mailcommand = "@sbindir@/smtp -h localhost -f \"\(Bacula\) %r\" -s \"Bacula: %t %e of %c %l\" %r"
- operatorcommand = "@sbindir@/smtp -h localhost -f \"\(Bacula\) %r\" -s \"Bacula: Intervention needed for %j\" %r"
- MailOnError = kern+ok@sibbald.com = all
- operator = kern+ok@sibbald.com = mount
- console = all, !skipped
-#
-# WARNING! the following will create a file that you must cycle from
-# time to time as it will grow indefinitely. However, it will
-# also keep all your messages if the scroll off the console.
-#
- append = "@working_dir@/log" = all, !skipped
-}
-
-# Default pool definition
-Pool {
- Name = Default
- Pool Type = Backup
- Recycle = yes # Bacula can automatically recycle Volumes
- AutoPrune = yes # Prune expired volumes
- Volume Retention = 365d # one year
- Accept Any Volume = yes # write on any volume in the pool
-}
+++ /dev/null
-#
-# Default Bacula File Daemon Configuration file
-#
-# For Bacula release 1.30 (12 April 2003) -- redhat 7.3
-#
-# There is not much to change here except perhaps the
-# File daemon Name to
-#
-
-#
-# List Directors who are permitted to contact this File daemon
-#
-Director {
- Name = rufus-dir
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc"
-}
-
-#
-# "Global" File daemon configuration specifications
-#
-FileDaemon { # this is me
- Name = rufus-fd
- FDport = 8102 # where we listen for the director
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- SubSys Directory = "@subsysdir@"
-}
-
-# Send all messages except skipped files back to Director
-Messages {
- Name = Standard
- director = rufus-dir = all
-}
+++ /dev/null
-#
-# Default Bacula Storage Daemon Configuration file
-#
-# For Bacula release 1.30 (12 April 2003) -- redhat 7.3
-#
-# You may need to change the name of your tape drive
-# on the "Archive Device" directive in the Device
-# resource. If you change the Name and/or the
-# "Media Type" in the Device resource, please ensure
-# that dird.conf has corresponding changes.
-#
-
-Storage { # definition of myself
- Name = rufus-sd
- SDPort = 8103 # Director's port
- WorkingDirectory = "@working_dir@"
- Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
-}
-
-#
-# List Directors who are permitted to contact Storage daemon
-#
-Director {
- Name = rufus-dir
- Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9"
-}
-
-#
-# Devices supported by this Storage daemon
-# To connect, the Director's bacula-dir.conf must have the
-# same Name and MediaType.
-#
-
-Device {
- Name = FileStorage
- Media Type = File
- Archive Device = /tmp
- LabelMedia = yes; # lets Bacula label unlabelled media
- Random Access = Yes;
- AutomaticMount = yes; # when device opened, read it
- RemovableMedia = no;
- AlwaysOpen = no;
-}
-
-#Device {
-# Name = "HP DLT 80"
-# Media Type = DLT8000
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#Device {
-# Name = SDT-7000 #
-# Media Type = DDS-2
-# Archive Device = /dev/nst0
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = yes;
-# RemovableMedia = yes;
-#}
-
-#Device {
-# Name = Floppy
-# Media Type = Floppy
-# Archive Device = /mnt/floppy
-# RemovableMedia = yes;
-# Random Access = Yes;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = no;
-#}
-
-#
-# A very old Exabyte with no end of media detection
-#
-#Device {
-# Name = "Exabyte 8mm"
-# Media Type = "8mm"
-# Archive Device = /dev/nst0
-# Hardware end of medium = No;
-# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = Yes;
-# RemovableMedia = yes;
-#}
-
-#
-# Send all messages to the Director,
-# mount messages also are sent to the email address
-#
-Messages {
- Name = Standard
- director = rufus-dir = all
-}
+++ /dev/null
-#
-# Bacula User Agent (or Console) Configuration File
-#
-
-Director {
- Name = rufus-dir
- DIRport = 8101
- address = rufus
- Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
-}
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-confs
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores
-bin/bacula stop
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/console -c bin/console.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output
-label
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-restore
-5
-done
-yes
-@sleep 1
-wait
-@output /dev/null
-messages
-quit
-END_OF_DATA
-sleep 2
-bin/bacula stop
-diff -ur build /tmp/bacula-restores${cwd}/build
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== Backup Bacula Test failed!!! ===== "
- echo " ===== Backup Bacula Test failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== Backup Bacula Test OK ===== "
- echo " ===== Backup Bacula Test OK ===== " >>test.out
-fi
-rm -rf /tmp/bacula-restores
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores
-echo "${cwd}/build" >/tmp/file-list
-bin/bacula stop
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/console -c bin/console.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output
-label
-TestVolume001
-run job=CompressedTest
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-restore
-5
-done
-yes
-wait
-@output /dev/null
-messages
-quit
-END_OF_DATA
-bin/bacula stop
-diff -ur build /tmp/bacula-restores${cwd}/build
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== compressed-test Bacula source failed!!! ===== "
- echo " ===== compressed-test failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== compressed-test Bacula source OK ===== "
- echo " ===== compressed-test OK ===== " >>test.out
-fi
-rm -rf /tmp/bacula-restores
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-echo " "
-echo " "
-echo " === /dev save/restore test ==="
-echo " "
-echo " "
-if [ $UID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== dev test failed!!! ===== "
- echo " ===== dev test failed!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/copy-test-confs
-echo "/dev" >/tmp/file-list
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores
-bin/bacula stop
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/console -c bin/console.conf <<END_OF_DATA
-@output /dev/null
-messages
-label
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-restore
-5
-done
-yes
-@sleep 1
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >/tmp/original
-cd /tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >/tmp/restored
-diff /tmp/original /tmp/restored
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== dev test failed!!! ===== "
- echo " ===== dev test failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== dev test OK ===== "
- echo " ===== dev test OK ===== " >>test.out
- rm -rf /tmp/bacula-restores /tmp/original /tmp/restored
- rm -rf /tmp/file-list /tmp/job /tmp/TestVolume001
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-echo " "
-echo " "
-echo " === /etc save/restore test ==="
-echo " "
-echo " "
-if [ $UID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== Test4 failed!!! ===== "
- echo " ===== Test4 failed!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/copy-test-confs
-echo "/etc" >/tmp/file-list
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores
-bin/bacula stop
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/console -c bin/console.conf <<END_OF_DATA
-@output /dev/null
-messages
-label
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-restore
-5
-done
-yes
-@sleep 1
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >/tmp/original
-cd /tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >/tmp/restored
-diff /tmp/original /tmp/restored
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== Test4 /etc failed!!! ===== "
- echo " ===== Test4 failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== Test4 /etc OK ===== "
- echo " ===== Test4 OK ===== " >>test.out
- rm -rf /tmp/bacula-restores /tmp/original /tmp/restored
- rm -rf /tmp/file-list /tmp/job /tmp/TestVolume001
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory
-# then restore it.
-#
-echo " "
-echo " "
-echo " === /lib save/restore test ==="
-echo " "
-echo " "
-if [ $UID != 0 ] ; then
- echo " "
- echo "You must be root to run this test."
- echo " ===== Test5 failed!!! ===== "
- echo " ===== Test5 failed!!! ===== " >>test.out
- echo " "
- exit 1
-fi
-cwd=`pwd`
-scripts/copy-test-confs
-echo "/lib" >/tmp/file-list
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores
-bin/bacula stop
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/console -c bin/console.conf <<END_OF_DATA
-@output /dev/null
-messages
-label
-TestVolume001
-run job=NightlySave
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-restore
-5
-done
-yes
-@sleep 1
-wait
-messages
-@output
-quit
-END_OF_DATA
-bin/bacula stop
-cd /
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-lib-test lib >/tmp/original
-cd /tmp/bacula-restores
-${cwd}/bin/testls -e ${cwd}/scripts/exclude-lib-test lib >/tmp/restored
-diff /tmp/original /tmp/restored
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== Test5 /lib failed!!! ===== "
- echo " ===== Test5 failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== Test5 /lib OK ===== "
- echo " ===== Test5 OK ===== " >>test.out
- rm -rf /tmp/bacula-restores /tmp/original /tmp/restored
- rm -rf /tmp/file-list /tmp/job /tmp/TestVolume001
-fi
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the Sparse option
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores
-echo "${cwd}/build" >/tmp/file-list
-bin/bacula stop
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/console -c bin/console.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output
-label
-TestVolume001
-run job=SparseCompressedTest
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-restore
-5
-done
-yes
-wait
-@output /dev/null
-messages
-quit
-END_OF_DATA
-bin/bacula stop
-diff -ur build /tmp/bacula-restores${cwd}/build
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== sparse-compressed-test Bacula source failed!!! ===== "
- echo " ===== sparse-compressed-test failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== sparse-compressed-test Bacula source OK ===== "
- echo " ===== sparse-compressed-test OK ===== " >>test.out
-fi
-rm -rf /tmp/bacula-restores
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the Sparse option
-# then restore it.
-#
-cwd=`pwd`
-scripts/copy-test-confs
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores
-echo "${cwd}/build" >/tmp/file-list
-bin/bacula stop
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/console -c bin/console.conf <<END_OF_DATA
-@output /dev/null
-messages
-@output
-label
-TestVolume001
-run job=SparseTest
-yes
-wait
-messages
-@#
-@# now do a restore
-@#
-restore
-5
-done
-yes
-wait
-@output /dev/null
-messages
-quit
-END_OF_DATA
-bin/bacula stop
-diff -ur build /tmp/bacula-restores${cwd}/build
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== sparse-test Bacula source failed!!! ===== "
- echo " ===== sparse-test failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== sparse-test Bacula source OK ===== "
- echo " ===== sparse-test OK ===== " >>test.out
-fi
-rm -rf /tmp/bacula-restores
+++ /dev/null
-#!/bin/sh
-echo " " >test.out
+++ /dev/null
-#!/bin/sh
-#
-# Run a simple backup of the Bacula build directory using the compressed option
-# then backup a second time and finally restore it
-#
-cwd=`pwd`
-scripts/copy-test-confs
-rm -rf /tmp/TestVolume001 /tmp/bacula-restores
-echo "${cwd}/build" >/tmp/file-list
-bin/bacula stop
-bin/drop_sqlite_tables
-bin/make_sqlite_tables
-bin/bacula start
-bin/console -c bin/console.conf <<END_OF_DATA
-@output /dev/null
-messages
-label
-TestVolume001
-run job=CompressedTest
-yes
-wait
-messages
-quit
-END_OF_DATA
-echo "Backup 1 done"
-touch ${cwd}/build/src/dird/*.c
-bin/console -c bin/console.conf <<END_OF_DATA
-run job=CompressedTest
-yes
-wait
-messages
-@output
-@#
-@# now do a restore
-@#
-restore
-5
-done
-yes
-wait
-@output /dev/null
-messages
-quit
-END_OF_DATA
-bin/bacula stop
-diff -ur build /tmp/bacula-restores${cwd}/build
-if [ $? != 0 ] ; then
- echo " "
- echo " "
- echo " ===== two-jobs-test Bacula source failed!!! ===== "
- echo " ===== two-jobs-test failed!!! ===== " >>test.out
- echo " "
-else
- echo " ===== two-jobs-test Bacula source OK ===== "
- echo " ===== two-jobs-test OK ===== " >>test.out
-fi
-rm -rf /tmp/bacula-restores
projects / bacula / bacula / commitdiff