Revert "cortex_m3: add auto maskisr"

This reverts commit ff640f197a9a343b2f3ed10e9174e35282334e8c.

Original patch reverted as Author's name was incorrectly set.

diff --git a/doc/openocd.texi b/doc/openocd.texi
index fd92d51acfcca70ac993859f1e866cdc9032b378..892661fd4a48dd0cf8952405300842634c33ea46 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -6720,21 +6720,8 @@ If @var{value} is defined, first assigns that.
 @subsection Cortex-M3 specific commands
 @cindex Cortex-M3
 
-@deffn Command {cortex_m3 maskisr} (@option{auto}|@option{on}|@option{off})
+@deffn Command {cortex_m3 maskisr} (@option{on}|@option{off})
 Control masking (disabling) interrupts during target step/resume.
-
-The @option{auto} option handles interrupts during stepping a way they get
-served but don't disturb the program flow. The step command first allows
-pending interrupt handlers to execute, then disables interrupts and steps over
-the next instruction where the core was halted. After the step interrupts
-are enabled again. If the interrupt handlers don't complete within 500ms,
-the step command leaves with the core running.
-
-Note that a free breakpoint is required for the @option{auto} option. If no
-breakpoint is available at the time of the step, then the step is taken
-with interrupts enabled, i.e. the same way the @option{off} option does.
-
-Default is @option{auto}.
 @end deffn
 
 @deffn Command {cortex_m3 vector_catch} [@option{all}|@option{none}|list]

diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c
index 98a775c30c6a100378ca35b11ff52224354426e8..9c3d2d9d691ffa9b13f1fd9bbbaa4518f5cc43c5 100644 (file)
--- a/src/target/cortex_m3.c
+++ b/src/target/cortex_m3.c
@@ -39,7 +39,6 @@
 #include "register.h"
 #include "arm_opcodes.h"
 #include "arm_semihosting.h"
-#include <helper/time_support.h>
 
 /* NOTE:  most of this should work fine for the Cortex-M1 and
  * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
@@ -859,8 +858,6 @@ static int cortex_m3_step(struct target *target, int current,
        struct breakpoint *breakpoint = NULL;
        struct reg *pc = armv7m->arm.pc;
        bool bkpt_inst_found = false;
-       int retval;
-       bool isr_timed_out = false;
 
        if (target->state != TARGET_HALTED)
        {
@@ -894,79 +891,11 @@ static int cortex_m3_step(struct target *target, int current,
         * instruction - as such simulate a step */
        if (bkpt_inst_found == false)
        {
-               /* Automatic ISR masking mode off: Just step over the next instruction */
-               if ((cortex_m3->isrmasking_mode != CORTEX_M3_ISRMASK_AUTO))
-               {
-                       cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
-               }
-               else
-               {
-                       /* Process interrupts during stepping in a way they don't interfere
-                        * debugging.
-                        *
-                        * Principle:
-                        *
-                        * Set a temporary break point at the current pc and let the core run
-                        * with interrupts enabled. Pending interrupts get served and we run
-                        * into the breakpoint again afterwards. Then we step over the next
-                        * instruction with interrupts disabled.
-                        *
-                        * If the pending interrupts don't complete within time, we leave the
-                        * core running. This may happen if the interrupts trigger faster
-                        * than the core can process them or the handler doesn't return.
-                        *
-                        * If no more breakpoints are available we simply do a step with
-                        * interrupts enabled.
-                        *
-                        */
-
-                       /* Set a temporary break point */
-                       retval = breakpoint_add(target, pc_value , 2, BKPT_TYPE_BY_ADDR(pc_value));
-                       bool tmp_bp_set = (retval == ERROR_OK);
-
-                       /* No more breakpoints left, just do a step */
-                       if (!tmp_bp_set)
-                       {
-                               cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
-                       }
-                       else
-                       {
-                               /* Start the core */
-                               LOG_DEBUG("Starting core to serve pending interrupts");
-                               int64_t t_start = timeval_ms();
-                               cortex_m3_write_debug_halt_mask(target, 0, C_HALT | C_STEP);
-
-                               /* Wait for pending handlers to complete or timeout */
-                               do {
-                                       retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
-                                       if (retval != ERROR_OK)
-                                       {
-                                               target->state = TARGET_UNKNOWN;
-                                               return retval;
-                                       }
-                                       isr_timed_out = ((timeval_ms() - t_start) > 500);
-                               } while (!((cortex_m3->dcb_dhcsr & S_HALT) || isr_timed_out));
-
-                               /* Remove the temporary breakpoint */
-                               breakpoint_remove(target, pc_value);
-
-                               if (isr_timed_out)
-                               {
-                                       LOG_DEBUG("Interrupt handlers didn't complete within time, "
-                                                       "leaving target running");
-                               }
-                               else
-                               {
-                                       /* Step over next instruction with interrupts disabled */
-                                       cortex_m3_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
-                                       cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
-                                       /* Re-enable interrupts */
-                                       cortex_m3_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
-                               }
-                       }
-               }
+               /* set step and clear halt */
+               cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
        }
 
+       int retval;
        retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
        if (retval != ERROR_OK)
                return retval;
@@ -977,13 +906,6 @@ static int cortex_m3_step(struct target *target, int current,
        if (breakpoint)
                cortex_m3_set_breakpoint(target, breakpoint);
 
-       if (isr_timed_out) {
-               /* Leave the core running. The user has to stop execution manually. */
-               target->debug_reason = DBG_REASON_NOTHALTED;
-               target->state = TARGET_RUNNING;
-               return ERROR_OK;
-       }
-
        LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
                        " nvic_icsr = 0x%" PRIx32,
                        cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr);
@@ -2182,15 +2104,6 @@ COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command)
        struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
        int retval;
 
-       static const Jim_Nvp nvp_maskisr_modes[] = {
-               { .name = "auto", .value = CORTEX_M3_ISRMASK_AUTO },
-               { .name = "off" , .value = CORTEX_M3_ISRMASK_OFF },
-               { .name = "on"  , .value = CORTEX_M3_ISRMASK_ON },
-               { .name = NULL  , .value = -1 },
-       };
-       const Jim_Nvp *n;
-
-
        retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
        if (retval != ERROR_OK)
                return retval;
@@ -2203,26 +2116,15 @@ COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command)
 
        if (CMD_ARGC > 0)
        {
-               n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
-               if (n->name == NULL)
-               {
-                       return ERROR_COMMAND_SYNTAX_ERROR;
-               }
-               cortex_m3->isrmasking_mode = n->value;
-
-
-               if(cortex_m3->isrmasking_mode == CORTEX_M3_ISRMASK_ON)
-               {
-                       cortex_m3_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
-               }
-               else
-               {
-                       cortex_m3_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
-               }
+               bool enable;
+               COMMAND_PARSE_ON_OFF(CMD_ARGV[0], enable);
+               uint32_t mask_on = C_HALT | (enable ? C_MASKINTS : 0);
+               uint32_t mask_off = enable ? 0 : C_MASKINTS;
+               cortex_m3_write_debug_halt_mask(target, mask_on, mask_off);
        }
 
-       n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m3->isrmasking_mode);
-       command_print(CMD_CTX, "cortex_m3 interrupt mask %s", n->name);
+       command_print(CMD_CTX, "cortex_m3 interrupt mask %s",
+                       (cortex_m3->dcb_dhcsr & C_MASKINTS) ? "on" : "off");
 
        return ERROR_OK;
 }
@@ -2272,7 +2174,7 @@ static const struct command_registration cortex_m3_exec_command_handlers[] = {
                .handler = handle_cortex_m3_mask_interrupts_command,
                .mode = COMMAND_EXEC,
                .help = "mask cortex_m3 interrupts",
-               .usage = "['auto'|'on'|'off']",
+               .usage = "['on'|'off']",
        },
        {
                .name = "vector_catch",

diff --git a/src/target/cortex_m3.h b/src/target/cortex_m3.h
index e16aa89feb96544664d4997f8e032843656341bd..e1f8ef8039018f642c068cb5216f6f7dfacb6bfc 100644 (file)
--- a/src/target/cortex_m3.h
+++ b/src/target/cortex_m3.h
@@ -140,13 +140,6 @@ enum cortex_m3_soft_reset_config
        CORTEX_M3_RESET_VECTRESET,
 };
 
-enum cortex_m3_isrmasking_mode
-{
-       CORTEX_M3_ISRMASK_AUTO,
-       CORTEX_M3_ISRMASK_OFF,
-       CORTEX_M3_ISRMASK_ON,
-};
-
 struct cortex_m3_common
 {
        int common_magic;
@@ -173,8 +166,6 @@ struct cortex_m3_common
 
        enum cortex_m3_soft_reset_config soft_reset_config;
 
-       enum cortex_m3_isrmasking_mode isrmasking_mode;
-
        struct armv7m_common armv7m;
 };