<Value>ARM_MATH_CM4=true</Value>\r
<Value>BOARD=SAM4S_EK</Value>\r
<Value>__SAM4S16C__</Value>\r
+ <Value>XMEGA=0</Value>\r
+ <Value>MEGA=0</Value>\r
+ <Value>UC3=0</Value>\r
</ListValues>\r
</armgcc.compiler.symbols.DefSymbols>\r
<armgcc.compiler.directories.IncludePaths>\r
<Value>../src/asf/thirdparty/CMSIS/Include</Value>\r
<Value>../src/asf/thirdparty/CMSIS/Lib/GCC</Value>\r
<Value>../src/config</Value>\r
- <Value>../src/FreeRTOS-Source/include</Value>\r
- <Value>../src/FreeRTOS-Source/portable/GCC/ARM_CM3</Value>\r
+ <Value>../src/asf/thirdparty/FreeRTOS/include</Value>\r
+ <Value>../src/asf/thirdparty/FreeRTOS/portable/GCC/ARM_CM3</Value>\r
<Value>../src/Common-Demo-Source/include</Value>\r
</ListValues>\r
</armgcc.compiler.directories.IncludePaths>\r
- <armgcc.compiler.optimization.level>Optimize (-O1)</armgcc.compiler.optimization.level>\r
<armgcc.compiler.optimization.OtherFlags>-fdata-sections</armgcc.compiler.optimization.OtherFlags>\r
<armgcc.compiler.optimization.PrepareFunctionsForGarbageCollection>True</armgcc.compiler.optimization.PrepareFunctionsForGarbageCollection>\r
<armgcc.compiler.optimization.DebugLevel>Maximum (-g3)</armgcc.compiler.optimization.DebugLevel>\r
<armgcc.compiler.warnings.AllWarnings>True</armgcc.compiler.warnings.AllWarnings>\r
- <armgcc.compiler.miscellaneous.OtherFlags>-pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Werror-implicit-function-declaration -Wpointer-arith -std=gnu99 -ffunction-sections -fdata-sections -Wchar-subscripts -Wcomment -Wformat=2 -Wimplicit-int -Wmain -Wparentheses -Wsequence-point -Wreturn-type -Wswitch -Wtrigraphs -Wunused -Wuninitialized -Wunknown-pragmas -Wfloat-equal -Wundef -Wshadow -Wbad-function-cast -Wwrite-strings -Wsign-compare -Waggregate-return -Wmissing-declarations -Wformat -Wmissing-format-attribute -Wno-deprecated-declarations -Wpacked -Wredundant-decls -Wnested-externs -Winline -Wlong-long -Wunreachable-code -Wcast-align --param max-inline-insns-single=500 -Dprintf=iprintf</armgcc.compiler.miscellaneous.OtherFlags>\r
+ <armgcc.compiler.miscellaneous.OtherFlags>-pipe -Wall -Wextra -std=gnu99 -ffunction-sections -fdata-sections --param max-inline-insns-single=500 -Dprintf=iprintf</armgcc.compiler.miscellaneous.OtherFlags>\r
<armgcc.linker.libraries.Libraries>\r
<ListValues>\r
<Value>arm_cortexM4l_math</Value>\r
<Compile Include="src\asf\sam\utils\cmsis\sam4s\source\templates\system_sam4s.c">\r
<SubType>compile</SubType>\r
</Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\croutine.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\FreeRTOS.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\list.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\mpu_wrappers.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\portable.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\projdefs.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\queue.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\semphr.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\StackMacros.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\task.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\include\timers.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\list.c">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\portable\GCC\ARM_CM3\port.c">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\portable\GCC\ARM_CM3\portmacro.h">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\portable\MemMang\heap_2.c">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\queue.c">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\tasks.c">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
+ <Compile Include="src\asf\thirdparty\FreeRTOS\timers.c">\r
+ <SubType>compile</SubType>\r
+ </Compile>\r
<Compile Include="src\Common-Demo-Source\BlockQ.c">\r
<SubType>compile</SubType>\r
</Compile>\r
<Compile Include="src\Common-Demo-Source\semtest.c">\r
<SubType>compile</SubType>\r
</Compile>\r
- <Compile Include="src\FreeRTOS-Source\include\FreeRTOS.h">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\include\queue.h">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\include\semphr.h">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\include\task.h">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\include\timers.h">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\list.c">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\portable\GCC\ARM_CM3\port.c">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\portable\MemMang\heap_2.c">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\queue.c">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\tasks.c">\r
- <SubType>compile</SubType>\r
- </Compile>\r
- <Compile Include="src\FreeRTOS-Source\timers.c">\r
+ <Compile Include="src\FreeRTOSConfig.h">\r
<SubType>compile</SubType>\r
</Compile>\r
<Compile Include="src\main.c">\r
<Folder Include="src\asf\thirdparty\CMSIS\Include\" />\r
<Folder Include="src\asf\thirdparty\CMSIS\Lib\" />\r
<Folder Include="src\asf\thirdparty\CMSIS\Lib\GCC\" />\r
+ <Folder Include="src\asf\thirdparty\FreeRTOS\" />\r
+ <Folder Include="src\asf\thirdparty\FreeRTOS\include\" />\r
+ <Folder Include="src\asf\thirdparty\FreeRTOS\portable\" />\r
+ <Folder Include="src\asf\thirdparty\FreeRTOS\portable\GCC\" />\r
+ <Folder Include="src\asf\thirdparty\FreeRTOS\portable\GCC\ARM_CM3\" />\r
+ <Folder Include="src\asf\thirdparty\FreeRTOS\portable\MemMang\" />\r
<Folder Include="src\Common-Demo-Source\include" />\r
<Folder Include="src\config\" />\r
- <Folder Include="src\FreeRTOS-Source" />\r
- <Folder Include="src\FreeRTOS-Source\include" />\r
- <Folder Include="src\FreeRTOS-Source\portable" />\r
- <Folder Include="src\FreeRTOS-Source\portable\GCC" />\r
- <Folder Include="src\FreeRTOS-Source\portable\GCC\ARM_CM3" />\r
<Folder Include="src\Common-Demo-Source" />\r
- <Folder Include="src\FreeRTOS-Source\portable\MemMang" />\r
</ItemGroup>\r
<Import Project="$(AVRSTUDIO_EXE_PATH)\\Vs\\Compiler.targets" />\r
</Project>
\ No newline at end of file
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
- \r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-#ifndef INC_FREERTOS_H\r
-#define INC_FREERTOS_H\r
-\r
-\r
-/*\r
- * Include the generic headers required for the FreeRTOS port being used.\r
- */\r
-#include <stddef.h>\r
-\r
-/* Basic FreeRTOS definitions. */\r
-#include "projdefs.h"\r
-\r
-/* Application specific configuration options. */\r
-#include "FreeRTOSConfig.h"\r
-\r
-/* Definitions specific to the port being used. */\r
-#include "portable.h"\r
-\r
-\r
-/* Defines the prototype to which the application task hook function must\r
-conform. */\r
-typedef portBASE_TYPE (*pdTASK_HOOK_CODE)( void * );\r
-\r
-\r
-\r
-\r
-\r
-/*\r
- * Check all the required application specific macros have been defined.\r
- * These macros are application specific and (as downloaded) are defined\r
- * within FreeRTOSConfig.h.\r
- */\r
-\r
-#ifndef configUSE_PREEMPTION\r
- #error Missing definition: configUSE_PREEMPTION should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef configUSE_IDLE_HOOK\r
- #error Missing definition: configUSE_IDLE_HOOK should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef configUSE_TICK_HOOK\r
- #error Missing definition: configUSE_TICK_HOOK should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef configUSE_CO_ROUTINES\r
- #error Missing definition: configUSE_CO_ROUTINES should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef INCLUDE_vTaskPrioritySet\r
- #error Missing definition: INCLUDE_vTaskPrioritySet should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef INCLUDE_uxTaskPriorityGet\r
- #error Missing definition: INCLUDE_uxTaskPriorityGet should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef INCLUDE_vTaskDelete \r
- #error Missing definition: INCLUDE_vTaskDelete should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef INCLUDE_vTaskSuspend \r
- #error Missing definition: INCLUDE_vTaskSuspend should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef INCLUDE_vTaskDelayUntil\r
- #error Missing definition: INCLUDE_vTaskDelayUntil should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef INCLUDE_vTaskDelay\r
- #error Missing definition: INCLUDE_vTaskDelay should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef configUSE_16_BIT_TICKS\r
- #error Missing definition: configUSE_16_BIT_TICKS should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
-#endif\r
-\r
-#ifndef INCLUDE_xTaskGetIdleTaskHandle\r
- #define INCLUDE_xTaskGetIdleTaskHandle 0\r
-#endif\r
-\r
-#ifndef INCLUDE_xTimerGetTimerDaemonTaskHandle\r
- #define INCLUDE_xTimerGetTimerDaemonTaskHandle 0\r
-#endif\r
-\r
-#ifndef INCLUDE_xQueueGetMutexHolder\r
- #define INCLUDE_xQueueGetMutexHolder 0\r
-#endif\r
-\r
-#ifndef INCLUDE_pcTaskGetTaskName\r
- #define INCLUDE_pcTaskGetTaskName 0\r
-#endif\r
-\r
-#ifndef configUSE_APPLICATION_TASK_TAG\r
- #define configUSE_APPLICATION_TASK_TAG 0\r
-#endif\r
-\r
-#ifndef INCLUDE_uxTaskGetStackHighWaterMark\r
- #define INCLUDE_uxTaskGetStackHighWaterMark 0\r
-#endif\r
-\r
-#ifndef configUSE_RECURSIVE_MUTEXES\r
- #define configUSE_RECURSIVE_MUTEXES 0\r
-#endif\r
-\r
-#ifndef configUSE_MUTEXES\r
- #define configUSE_MUTEXES 0\r
-#endif\r
-\r
-#ifndef configUSE_TIMERS\r
- #define configUSE_TIMERS 0\r
-#endif\r
-\r
-#ifndef configUSE_COUNTING_SEMAPHORES\r
- #define configUSE_COUNTING_SEMAPHORES 0\r
-#endif\r
-\r
-#ifndef configUSE_ALTERNATIVE_API\r
- #define configUSE_ALTERNATIVE_API 0\r
-#endif\r
-\r
-#ifndef portCRITICAL_NESTING_IN_TCB\r
- #define portCRITICAL_NESTING_IN_TCB 0\r
-#endif\r
-\r
-#ifndef configMAX_TASK_NAME_LEN\r
- #define configMAX_TASK_NAME_LEN 16\r
-#endif\r
-\r
-#ifndef configIDLE_SHOULD_YIELD\r
- #define configIDLE_SHOULD_YIELD 1\r
-#endif\r
-\r
-#if configMAX_TASK_NAME_LEN < 1\r
- #error configMAX_TASK_NAME_LEN must be set to a minimum of 1 in FreeRTOSConfig.h\r
-#endif\r
-\r
-#ifndef INCLUDE_xTaskResumeFromISR\r
- #define INCLUDE_xTaskResumeFromISR 1\r
-#endif\r
-\r
-#ifndef configASSERT\r
- #define configASSERT( x )\r
-#endif\r
-\r
-#ifndef portALIGNMENT_ASSERT_pxCurrentTCB\r
- #define portALIGNMENT_ASSERT_pxCurrentTCB configASSERT\r
-#endif\r
-\r
-/* The timers module relies on xTaskGetSchedulerState(). */\r
-#if configUSE_TIMERS == 1\r
-\r
- #ifndef configTIMER_TASK_PRIORITY\r
- #error If configUSE_TIMERS is set to 1 then configTIMER_TASK_PRIORITY must also be defined.\r
- #endif /* configTIMER_TASK_PRIORITY */\r
-\r
- #ifndef configTIMER_QUEUE_LENGTH\r
- #error If configUSE_TIMERS is set to 1 then configTIMER_QUEUE_LENGTH must also be defined.\r
- #endif /* configTIMER_QUEUE_LENGTH */\r
-\r
- #ifndef configTIMER_TASK_STACK_DEPTH\r
- #error If configUSE_TIMERS is set to 1 then configTIMER_TASK_STACK_DEPTH must also be defined.\r
- #endif /* configTIMER_TASK_STACK_DEPTH */\r
-\r
-#endif /* configUSE_TIMERS */\r
-\r
-#ifndef INCLUDE_xTaskGetSchedulerState\r
- #define INCLUDE_xTaskGetSchedulerState 0\r
-#endif\r
-\r
-#ifndef INCLUDE_xTaskGetCurrentTaskHandle\r
- #define INCLUDE_xTaskGetCurrentTaskHandle 0\r
-#endif\r
-\r
-\r
-#ifndef portSET_INTERRUPT_MASK_FROM_ISR\r
- #define portSET_INTERRUPT_MASK_FROM_ISR() 0\r
-#endif\r
-\r
-#ifndef portCLEAR_INTERRUPT_MASK_FROM_ISR\r
- #define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue ) ( void ) uxSavedStatusValue\r
-#endif\r
-\r
-#ifndef portCLEAN_UP_TCB\r
- #define portCLEAN_UP_TCB( pxTCB ) ( void ) pxTCB\r
-#endif\r
-\r
-#ifndef portSETUP_TCB\r
- #define portSETUP_TCB( pxTCB ) ( void ) pxTCB\r
-#endif\r
-\r
-#ifndef configQUEUE_REGISTRY_SIZE\r
- #define configQUEUE_REGISTRY_SIZE 0U\r
-#endif\r
-\r
-#if ( configQUEUE_REGISTRY_SIZE < 1 )\r
- #define vQueueAddToRegistry( xQueue, pcName )\r
- #define vQueueUnregisterQueue( xQueue )\r
-#endif\r
-\r
-#ifndef portPOINTER_SIZE_TYPE\r
- #define portPOINTER_SIZE_TYPE unsigned long\r
-#endif\r
-\r
-/* Remove any unused trace macros. */\r
-#ifndef traceSTART\r
- /* Used to perform any necessary initialisation - for example, open a file\r
- into which trace is to be written. */\r
- #define traceSTART()\r
-#endif\r
-\r
-#ifndef traceEND\r
- /* Use to close a trace, for example close a file into which trace has been\r
- written. */\r
- #define traceEND()\r
-#endif\r
-\r
-#ifndef traceTASK_SWITCHED_IN\r
- /* Called after a task has been selected to run. pxCurrentTCB holds a pointer\r
- to the task control block of the selected task. */\r
- #define traceTASK_SWITCHED_IN()\r
-#endif\r
-\r
-#ifndef traceTASK_SWITCHED_OUT\r
- /* Called before a task has been selected to run. pxCurrentTCB holds a pointer\r
- to the task control block of the task being switched out. */\r
- #define traceTASK_SWITCHED_OUT()\r
-#endif\r
-\r
-#ifndef traceTASK_PRIORITY_INHERIT\r
- /* Called when a task attempts to take a mutex that is already held by a\r
- lower priority task. pxTCBOfMutexHolder is a pointer to the TCB of the task\r
- that holds the mutex. uxInheritedPriority is the priority the mutex holder\r
- will inherit (the priority of the task that is attempting to obtain the\r
- muted. */\r
- #define traceTASK_PRIORITY_INHERIT( pxTCBOfMutexHolder, uxInheritedPriority )\r
-#endif\r
-\r
-#ifndef traceTASK_PRIORITY_DISINHERIT\r
- /* Called when a task releases a mutex, the holding of which had resulted in\r
- the task inheriting the priority of a higher priority task. \r
- pxTCBOfMutexHolder is a pointer to the TCB of the task that is releasing the\r
- mutex. uxOriginalPriority is the task's configured (base) priority. */\r
- #define traceTASK_PRIORITY_DISINHERIT( pxTCBOfMutexHolder, uxOriginalPriority )\r
-#endif\r
-\r
-#ifndef traceBLOCKING_ON_QUEUE_RECEIVE\r
- /* Task is about to block because it cannot read from a\r
- queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore\r
- upon which the read was attempted. pxCurrentTCB points to the TCB of the\r
- task that attempted the read. */\r
- #define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue )\r
-#endif\r
-\r
-#ifndef traceBLOCKING_ON_QUEUE_SEND\r
- /* Task is about to block because it cannot write to a\r
- queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore\r
- upon which the write was attempted. pxCurrentTCB points to the TCB of the\r
- task that attempted the write. */\r
- #define traceBLOCKING_ON_QUEUE_SEND( pxQueue )\r
-#endif\r
-\r
-#ifndef configCHECK_FOR_STACK_OVERFLOW\r
- #define configCHECK_FOR_STACK_OVERFLOW 0\r
-#endif\r
-\r
-/* The following event macros are embedded in the kernel API calls. */\r
-\r
-#ifndef traceMOVED_TASK_TO_READY_STATE\r
- #define traceMOVED_TASK_TO_READY_STATE( pxTCB )\r
-#endif\r
-\r
-#ifndef traceQUEUE_CREATE \r
- #define traceQUEUE_CREATE( pxNewQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_CREATE_FAILED\r
- #define traceQUEUE_CREATE_FAILED( ucQueueType )\r
-#endif\r
-\r
-#ifndef traceCREATE_MUTEX\r
- #define traceCREATE_MUTEX( pxNewQueue )\r
-#endif\r
-\r
-#ifndef traceCREATE_MUTEX_FAILED\r
- #define traceCREATE_MUTEX_FAILED()\r
-#endif\r
-\r
-#ifndef traceGIVE_MUTEX_RECURSIVE\r
- #define traceGIVE_MUTEX_RECURSIVE( pxMutex )\r
-#endif\r
-\r
-#ifndef traceGIVE_MUTEX_RECURSIVE_FAILED\r
- #define traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex )\r
-#endif\r
-\r
-#ifndef traceTAKE_MUTEX_RECURSIVE\r
- #define traceTAKE_MUTEX_RECURSIVE( pxMutex )\r
-#endif\r
-\r
-#ifndef traceTAKE_MUTEX_RECURSIVE_FAILED\r
- #define traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex )\r
-#endif\r
-\r
-#ifndef traceCREATE_COUNTING_SEMAPHORE\r
- #define traceCREATE_COUNTING_SEMAPHORE()\r
-#endif\r
-\r
-#ifndef traceCREATE_COUNTING_SEMAPHORE_FAILED\r
- #define traceCREATE_COUNTING_SEMAPHORE_FAILED()\r
-#endif\r
-\r
-#ifndef traceQUEUE_SEND\r
- #define traceQUEUE_SEND( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_SEND_FAILED\r
- #define traceQUEUE_SEND_FAILED( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_RECEIVE\r
- #define traceQUEUE_RECEIVE( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_PEEK\r
- #define traceQUEUE_PEEK( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_RECEIVE_FAILED\r
- #define traceQUEUE_RECEIVE_FAILED( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_SEND_FROM_ISR\r
- #define traceQUEUE_SEND_FROM_ISR( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_SEND_FROM_ISR_FAILED\r
- #define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_RECEIVE_FROM_ISR\r
- #define traceQUEUE_RECEIVE_FROM_ISR( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_RECEIVE_FROM_ISR_FAILED\r
- #define traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue )\r
-#endif\r
-\r
-#ifndef traceQUEUE_DELETE\r
- #define traceQUEUE_DELETE( pxQueue )\r
-#endif\r
-\r
-#ifndef traceTASK_CREATE\r
- #define traceTASK_CREATE( pxNewTCB )\r
-#endif\r
-\r
-#ifndef traceTASK_CREATE_FAILED\r
- #define traceTASK_CREATE_FAILED()\r
-#endif\r
-\r
-#ifndef traceTASK_DELETE\r
- #define traceTASK_DELETE( pxTaskToDelete )\r
-#endif\r
-\r
-#ifndef traceTASK_DELAY_UNTIL\r
- #define traceTASK_DELAY_UNTIL()\r
-#endif\r
-\r
-#ifndef traceTASK_DELAY\r
- #define traceTASK_DELAY()\r
-#endif\r
-\r
-#ifndef traceTASK_PRIORITY_SET\r
- #define traceTASK_PRIORITY_SET( pxTask, uxNewPriority )\r
-#endif\r
-\r
-#ifndef traceTASK_SUSPEND\r
- #define traceTASK_SUSPEND( pxTaskToSuspend )\r
-#endif\r
-\r
-#ifndef traceTASK_RESUME\r
- #define traceTASK_RESUME( pxTaskToResume )\r
-#endif\r
-\r
-#ifndef traceTASK_RESUME_FROM_ISR\r
- #define traceTASK_RESUME_FROM_ISR( pxTaskToResume )\r
-#endif\r
-\r
-#ifndef traceTASK_INCREMENT_TICK\r
- #define traceTASK_INCREMENT_TICK( xTickCount )\r
-#endif\r
-\r
-#ifndef traceTIMER_CREATE\r
- #define traceTIMER_CREATE( pxNewTimer )\r
-#endif\r
-\r
-#ifndef traceTIMER_CREATE_FAILED\r
- #define traceTIMER_CREATE_FAILED()\r
-#endif\r
-\r
-#ifndef traceTIMER_COMMAND_SEND\r
- #define traceTIMER_COMMAND_SEND( xTimer, xMessageID, xMessageValueValue, xReturn )\r
-#endif\r
-\r
-#ifndef traceTIMER_EXPIRED\r
- #define traceTIMER_EXPIRED( pxTimer )\r
-#endif\r
-\r
-#ifndef traceTIMER_COMMAND_RECEIVED\r
- #define traceTIMER_COMMAND_RECEIVED( pxTimer, xMessageID, xMessageValue )\r
-#endif\r
-\r
-#ifndef configGENERATE_RUN_TIME_STATS\r
- #define configGENERATE_RUN_TIME_STATS 0\r
-#endif\r
-\r
-#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
-\r
- #ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS\r
- #error If configGENERATE_RUN_TIME_STATS is defined then portCONFIGURE_TIMER_FOR_RUN_TIME_STATS must also be defined. portCONFIGURE_TIMER_FOR_RUN_TIME_STATS should call a port layer function to setup a peripheral timer/counter that can then be used as the run time counter time base.\r
- #endif /* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS */\r
-\r
- #ifndef portGET_RUN_TIME_COUNTER_VALUE\r
- #ifndef portALT_GET_RUN_TIME_COUNTER_VALUE\r
- #error If configGENERATE_RUN_TIME_STATS is defined then either portGET_RUN_TIME_COUNTER_VALUE or portALT_GET_RUN_TIME_COUNTER_VALUE must also be defined. See the examples provided and the FreeRTOS web site for more information.\r
- #endif /* portALT_GET_RUN_TIME_COUNTER_VALUE */\r
- #endif /* portGET_RUN_TIME_COUNTER_VALUE */\r
-\r
-#endif /* configGENERATE_RUN_TIME_STATS */\r
-\r
-#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS\r
- #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS()\r
-#endif\r
-\r
-#ifndef configUSE_MALLOC_FAILED_HOOK\r
- #define configUSE_MALLOC_FAILED_HOOK 0\r
-#endif\r
-\r
-#ifndef portPRIVILEGE_BIT\r
- #define portPRIVILEGE_BIT ( ( unsigned portBASE_TYPE ) 0x00 )\r
-#endif\r
-\r
-#ifndef portYIELD_WITHIN_API\r
- #define portYIELD_WITHIN_API portYIELD\r
-#endif\r
-\r
-#ifndef pvPortMallocAligned\r
- #define pvPortMallocAligned( x, puxStackBuffer ) ( ( ( puxStackBuffer ) == NULL ) ? ( pvPortMalloc( ( x ) ) ) : ( puxStackBuffer ) )\r
-#endif\r
-\r
-#ifndef vPortFreeAligned\r
- #define vPortFreeAligned( pvBlockToFree ) vPortFree( pvBlockToFree )\r
-#endif\r
-\r
-#endif /* INC_FREERTOS_H */\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-#ifndef STACK_MACROS_H\r
-#define STACK_MACROS_H\r
-\r
-/*\r
- * Call the stack overflow hook function if the stack of the task being swapped\r
- * out is currently overflowed, or looks like it might have overflowed in the\r
- * past.\r
- *\r
- * Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check\r
- * the current stack state only - comparing the current top of stack value to\r
- * the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1\r
- * will also cause the last few stack bytes to be checked to ensure the value\r
- * to which the bytes were set when the task was created have not been\r
- * overwritten. Note this second test does not guarantee that an overflowed\r
- * stack will always be recognised.\r
- */\r
-\r
-/*-----------------------------------------------------------*/\r
-\r
-#if( configCHECK_FOR_STACK_OVERFLOW == 0 )\r
-\r
- /* FreeRTOSConfig.h is not set to check for stack overflows. */\r
- #define taskFIRST_CHECK_FOR_STACK_OVERFLOW()\r
- #define taskSECOND_CHECK_FOR_STACK_OVERFLOW()\r
-\r
-#endif /* configCHECK_FOR_STACK_OVERFLOW == 0 */\r
-/*-----------------------------------------------------------*/\r
-\r
-#if( configCHECK_FOR_STACK_OVERFLOW == 1 )\r
-\r
- /* FreeRTOSConfig.h is only set to use the first method of\r
- overflow checking. */\r
- #define taskSECOND_CHECK_FOR_STACK_OVERFLOW()\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if( ( configCHECK_FOR_STACK_OVERFLOW > 0 ) && ( portSTACK_GROWTH < 0 ) )\r
-\r
- /* Only the current stack state is to be checked. */\r
- #define taskFIRST_CHECK_FOR_STACK_OVERFLOW() \\r
- { \\r
- /* Is the currently saved stack pointer within the stack limit? */ \\r
- if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \\r
- { \\r
- vApplicationStackOverflowHook( ( xTaskHandle ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \\r
- } \\r
- }\r
-\r
-#endif /* configCHECK_FOR_STACK_OVERFLOW > 0 */\r
-/*-----------------------------------------------------------*/\r
-\r
-#if( ( configCHECK_FOR_STACK_OVERFLOW > 0 ) && ( portSTACK_GROWTH > 0 ) )\r
-\r
- /* Only the current stack state is to be checked. */\r
- #define taskFIRST_CHECK_FOR_STACK_OVERFLOW() \\r
- { \\r
- \\r
- /* Is the currently saved stack pointer within the stack limit? */ \\r
- if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \\r
- { \\r
- vApplicationStackOverflowHook( ( xTaskHandle ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \\r
- } \\r
- }\r
-\r
-#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */\r
-/*-----------------------------------------------------------*/\r
-\r
-#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )\r
-\r
- #define taskSECOND_CHECK_FOR_STACK_OVERFLOW() \\r
- { \\r
- static const unsigned char ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
- tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
- tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
- tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
- tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \\r
- \\r
- \\r
- /* Has the extremity of the task stack ever been written over? */ \\r
- if( memcmp( ( void * ) pxCurrentTCB->pxStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \\r
- { \\r
- vApplicationStackOverflowHook( ( xTaskHandle ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \\r
- } \\r
- }\r
-\r
-#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */\r
-/*-----------------------------------------------------------*/\r
-\r
-#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )\r
-\r
- #define taskSECOND_CHECK_FOR_STACK_OVERFLOW() \\r
- { \\r
- char *pcEndOfStack = ( char * ) pxCurrentTCB->pxEndOfStack; \\r
- static const unsigned char ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
- tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
- tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
- tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
- tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \\r
- \\r
- \\r
- pcEndOfStack -= sizeof( ucExpectedStackBytes ); \\r
- \\r
- /* Has the extremity of the task stack ever been written over? */ \\r
- if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \\r
- { \\r
- vApplicationStackOverflowHook( ( xTaskHandle ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \\r
- } \\r
- }\r
-\r
-#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */\r
-/*-----------------------------------------------------------*/\r
-\r
-#endif /* STACK_MACROS_H */\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-#ifndef CO_ROUTINE_H\r
-#define CO_ROUTINE_H\r
-\r
-#ifndef INC_FREERTOS_H\r
- #error "include FreeRTOS.h must appear in source files before include croutine.h"\r
-#endif\r
-\r
-#include "list.h"\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-/* Used to hide the implementation of the co-routine control block. The\r
-control block structure however has to be included in the header due to\r
-the macro implementation of the co-routine functionality. */\r
-typedef void * xCoRoutineHandle;\r
-\r
-/* Defines the prototype to which co-routine functions must conform. */\r
-typedef void (*crCOROUTINE_CODE)( xCoRoutineHandle, unsigned portBASE_TYPE );\r
-\r
-typedef struct corCoRoutineControlBlock\r
-{\r
- crCOROUTINE_CODE pxCoRoutineFunction;\r
- xListItem xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */\r
- xListItem xEventListItem; /*< List item used to place the CRCB in event lists. */\r
- unsigned portBASE_TYPE uxPriority; /*< The priority of the co-routine in relation to other co-routines. */\r
- unsigned portBASE_TYPE uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */\r
- unsigned short uxState; /*< Used internally by the co-routine implementation. */\r
-} corCRCB; /* Co-routine control block. Note must be identical in size down to uxPriority with tskTCB. */\r
-\r
-/**\r
- * croutine. h\r
- *<pre>\r
- portBASE_TYPE xCoRoutineCreate(\r
- crCOROUTINE_CODE pxCoRoutineCode,\r
- unsigned portBASE_TYPE uxPriority,\r
- unsigned portBASE_TYPE uxIndex\r
- );</pre>\r
- *\r
- * Create a new co-routine and add it to the list of co-routines that are\r
- * ready to run.\r
- *\r
- * @param pxCoRoutineCode Pointer to the co-routine function. Co-routine\r
- * functions require special syntax - see the co-routine section of the WEB\r
- * documentation for more information.\r
- *\r
- * @param uxPriority The priority with respect to other co-routines at which\r
- * the co-routine will run.\r
- *\r
- * @param uxIndex Used to distinguish between different co-routines that\r
- * execute the same function. See the example below and the co-routine section\r
- * of the WEB documentation for further information.\r
- *\r
- * @return pdPASS if the co-routine was successfully created and added to a ready\r
- * list, otherwise an error code defined with ProjDefs.h.\r
- *\r
- * Example usage:\r
- <pre>\r
- // Co-routine to be created.\r
- void vFlashCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
- {\r
- // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
- // This may not be necessary for const variables.\r
- static const char cLedToFlash[ 2 ] = { 5, 6 };\r
- static const portTickType uxFlashRates[ 2 ] = { 200, 400 };\r
-\r
- // Must start every co-routine with a call to crSTART();\r
- crSTART( xHandle );\r
-\r
- for( ;; )\r
- {\r
- // This co-routine just delays for a fixed period, then toggles\r
- // an LED. Two co-routines are created using this function, so\r
- // the uxIndex parameter is used to tell the co-routine which\r
- // LED to flash and how long to delay. This assumes xQueue has\r
- // already been created.\r
- vParTestToggleLED( cLedToFlash[ uxIndex ] );\r
- crDELAY( xHandle, uxFlashRates[ uxIndex ] );\r
- }\r
-\r
- // Must end every co-routine with a call to crEND();\r
- crEND();\r
- }\r
-\r
- // Function that creates two co-routines.\r
- void vOtherFunction( void )\r
- {\r
- unsigned char ucParameterToPass;\r
- xTaskHandle xHandle;\r
- \r
- // Create two co-routines at priority 0. The first is given index 0\r
- // so (from the code above) toggles LED 5 every 200 ticks. The second\r
- // is given index 1 so toggles LED 6 every 400 ticks.\r
- for( uxIndex = 0; uxIndex < 2; uxIndex++ )\r
- {\r
- xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );\r
- }\r
- }\r
- </pre>\r
- * \defgroup xCoRoutineCreate xCoRoutineCreate\r
- * \ingroup Tasks\r
- */\r
-signed portBASE_TYPE xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, unsigned portBASE_TYPE uxPriority, unsigned portBASE_TYPE uxIndex );\r
-\r
-\r
-/**\r
- * croutine. h\r
- *<pre>\r
- void vCoRoutineSchedule( void );</pre>\r
- *\r
- * Run a co-routine.\r
- *\r
- * vCoRoutineSchedule() executes the highest priority co-routine that is able\r
- * to run. The co-routine will execute until it either blocks, yields or is\r
- * preempted by a task. Co-routines execute cooperatively so one\r
- * co-routine cannot be preempted by another, but can be preempted by a task.\r
- *\r
- * If an application comprises of both tasks and co-routines then\r
- * vCoRoutineSchedule should be called from the idle task (in an idle task\r
- * hook).\r
- *\r
- * Example usage:\r
- <pre>\r
- // This idle task hook will schedule a co-routine each time it is called.\r
- // The rest of the idle task will execute between co-routine calls.\r
- void vApplicationIdleHook( void )\r
- {\r
- vCoRoutineSchedule();\r
- }\r
-\r
- // Alternatively, if you do not require any other part of the idle task to\r
- // execute, the idle task hook can call vCoRoutineScheduler() within an\r
- // infinite loop.\r
- void vApplicationIdleHook( void )\r
- {\r
- for( ;; )\r
- {\r
- vCoRoutineSchedule();\r
- }\r
- }\r
- </pre>\r
- * \defgroup vCoRoutineSchedule vCoRoutineSchedule\r
- * \ingroup Tasks\r
- */\r
-void vCoRoutineSchedule( void );\r
-\r
-/**\r
- * croutine. h\r
- * <pre>\r
- crSTART( xCoRoutineHandle xHandle );</pre>\r
- *\r
- * This macro MUST always be called at the start of a co-routine function.\r
- *\r
- * Example usage:\r
- <pre>\r
- // Co-routine to be created.\r
- void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
- {\r
- // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
- static long ulAVariable;\r
-\r
- // Must start every co-routine with a call to crSTART();\r
- crSTART( xHandle );\r
-\r
- for( ;; )\r
- {\r
- // Co-routine functionality goes here.\r
- }\r
-\r
- // Must end every co-routine with a call to crEND();\r
- crEND();\r
- }</pre>\r
- * \defgroup crSTART crSTART\r
- * \ingroup Tasks\r
- */\r
-#define crSTART( pxCRCB ) switch( ( ( corCRCB * )( pxCRCB ) )->uxState ) { case 0:\r
-\r
-/**\r
- * croutine. h\r
- * <pre>\r
- crEND();</pre>\r
- *\r
- * This macro MUST always be called at the end of a co-routine function.\r
- *\r
- * Example usage:\r
- <pre>\r
- // Co-routine to be created.\r
- void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
- {\r
- // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
- static long ulAVariable;\r
-\r
- // Must start every co-routine with a call to crSTART();\r
- crSTART( xHandle );\r
-\r
- for( ;; )\r
- {\r
- // Co-routine functionality goes here.\r
- }\r
-\r
- // Must end every co-routine with a call to crEND();\r
- crEND();\r
- }</pre>\r
- * \defgroup crSTART crSTART\r
- * \ingroup Tasks\r
- */\r
-#define crEND() }\r
-\r
-/*\r
- * These macros are intended for internal use by the co-routine implementation\r
- * only. The macros should not be used directly by application writers.\r
- */\r
-#define crSET_STATE0( xHandle ) ( ( corCRCB * )( xHandle ) )->uxState = (__LINE__ * 2); return; case (__LINE__ * 2):\r
-#define crSET_STATE1( xHandle ) ( ( corCRCB * )( xHandle ) )->uxState = ((__LINE__ * 2)+1); return; case ((__LINE__ * 2)+1):\r
-\r
-/**\r
- * croutine. h\r
- *<pre>\r
- crDELAY( xCoRoutineHandle xHandle, portTickType xTicksToDelay );</pre>\r
- *\r
- * Delay a co-routine for a fixed period of time.\r
- *\r
- * crDELAY can only be called from the co-routine function itself - not\r
- * from within a function called by the co-routine function. This is because\r
- * co-routines do not maintain their own stack.\r
- *\r
- * @param xHandle The handle of the co-routine to delay. This is the xHandle\r
- * parameter of the co-routine function.\r
- *\r
- * @param xTickToDelay The number of ticks that the co-routine should delay\r
- * for. The actual amount of time this equates to is defined by\r
- * configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_RATE_MS\r
- * can be used to convert ticks to milliseconds.\r
- *\r
- * Example usage:\r
- <pre>\r
- // Co-routine to be created.\r
- void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
- {\r
- // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
- // This may not be necessary for const variables.\r
- // We are to delay for 200ms.\r
- static const xTickType xDelayTime = 200 / portTICK_RATE_MS;\r
-\r
- // Must start every co-routine with a call to crSTART();\r
- crSTART( xHandle );\r
-\r
- for( ;; )\r
- {\r
- // Delay for 200ms.\r
- crDELAY( xHandle, xDelayTime );\r
-\r
- // Do something here.\r
- }\r
-\r
- // Must end every co-routine with a call to crEND();\r
- crEND();\r
- }</pre>\r
- * \defgroup crDELAY crDELAY\r
- * \ingroup Tasks\r
- */\r
-#define crDELAY( xHandle, xTicksToDelay ) \\r
- if( ( xTicksToDelay ) > 0 ) \\r
- { \\r
- vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \\r
- } \\r
- crSET_STATE0( ( xHandle ) );\r
-\r
-/**\r
- * <pre>\r
- crQUEUE_SEND(\r
- xCoRoutineHandle xHandle,\r
- xQueueHandle pxQueue,\r
- void *pvItemToQueue,\r
- portTickType xTicksToWait,\r
- portBASE_TYPE *pxResult\r
- )</pre>\r
- *\r
- * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine\r
- * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.\r
- *\r
- * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas\r
- * xQueueSend() and xQueueReceive() can only be used from tasks.\r
- *\r
- * crQUEUE_SEND can only be called from the co-routine function itself - not\r
- * from within a function called by the co-routine function. This is because\r
- * co-routines do not maintain their own stack.\r
- *\r
- * See the co-routine section of the WEB documentation for information on\r
- * passing data between tasks and co-routines and between ISR's and\r
- * co-routines.\r
- *\r
- * @param xHandle The handle of the calling co-routine. This is the xHandle\r
- * parameter of the co-routine function.\r
- *\r
- * @param pxQueue The handle of the queue on which the data will be posted.\r
- * The handle is obtained as the return value when the queue is created using\r
- * the xQueueCreate() API function.\r
- *\r
- * @param pvItemToQueue A pointer to the data being posted onto the queue.\r
- * The number of bytes of each queued item is specified when the queue is\r
- * created. This number of bytes is copied from pvItemToQueue into the queue\r
- * itself.\r
- *\r
- * @param xTickToDelay The number of ticks that the co-routine should block\r
- * to wait for space to become available on the queue, should space not be\r
- * available immediately. The actual amount of time this equates to is defined\r
- * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant\r
- * portTICK_RATE_MS can be used to convert ticks to milliseconds (see example\r
- * below).\r
- *\r
- * @param pxResult The variable pointed to by pxResult will be set to pdPASS if\r
- * data was successfully posted onto the queue, otherwise it will be set to an\r
- * error defined within ProjDefs.h.\r
- *\r
- * Example usage:\r
- <pre>\r
- // Co-routine function that blocks for a fixed period then posts a number onto\r
- // a queue.\r
- static void prvCoRoutineFlashTask( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
- {\r
- // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
- static portBASE_TYPE xNumberToPost = 0;\r
- static portBASE_TYPE xResult;\r
-\r
- // Co-routines must begin with a call to crSTART().\r
- crSTART( xHandle );\r
-\r
- for( ;; )\r
- {\r
- // This assumes the queue has already been created.\r
- crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );\r
-\r
- if( xResult != pdPASS )\r
- {\r
- // The message was not posted!\r
- }\r
-\r
- // Increment the number to be posted onto the queue.\r
- xNumberToPost++;\r
-\r
- // Delay for 100 ticks.\r
- crDELAY( xHandle, 100 );\r
- }\r
-\r
- // Co-routines must end with a call to crEND().\r
- crEND();\r
- }</pre>\r
- * \defgroup crQUEUE_SEND crQUEUE_SEND\r
- * \ingroup Tasks\r
- */\r
-#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \\r
-{ \\r
- *( pxResult ) = xQueueCRSend( ( pxQueue) , ( pvItemToQueue) , ( xTicksToWait ) ); \\r
- if( *( pxResult ) == errQUEUE_BLOCKED ) \\r
- { \\r
- crSET_STATE0( ( xHandle ) ); \\r
- *pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \\r
- } \\r
- if( *pxResult == errQUEUE_YIELD ) \\r
- { \\r
- crSET_STATE1( ( xHandle ) ); \\r
- *pxResult = pdPASS; \\r
- } \\r
-}\r
-\r
-/**\r
- * croutine. h\r
- * <pre>\r
- crQUEUE_RECEIVE(\r
- xCoRoutineHandle xHandle,\r
- xQueueHandle pxQueue,\r
- void *pvBuffer,\r
- portTickType xTicksToWait,\r
- portBASE_TYPE *pxResult\r
- )</pre>\r
- *\r
- * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine\r
- * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.\r
- *\r
- * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas\r
- * xQueueSend() and xQueueReceive() can only be used from tasks.\r
- *\r
- * crQUEUE_RECEIVE can only be called from the co-routine function itself - not\r
- * from within a function called by the co-routine function. This is because\r
- * co-routines do not maintain their own stack.\r
- *\r
- * See the co-routine section of the WEB documentation for information on\r
- * passing data between tasks and co-routines and between ISR's and\r
- * co-routines.\r
- *\r
- * @param xHandle The handle of the calling co-routine. This is the xHandle\r
- * parameter of the co-routine function.\r
- *\r
- * @param pxQueue The handle of the queue from which the data will be received.\r
- * The handle is obtained as the return value when the queue is created using\r
- * the xQueueCreate() API function.\r
- *\r
- * @param pvBuffer The buffer into which the received item is to be copied.\r
- * The number of bytes of each queued item is specified when the queue is\r
- * created. This number of bytes is copied into pvBuffer.\r
- *\r
- * @param xTickToDelay The number of ticks that the co-routine should block\r
- * to wait for data to become available from the queue, should data not be\r
- * available immediately. The actual amount of time this equates to is defined\r
- * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant\r
- * portTICK_RATE_MS can be used to convert ticks to milliseconds (see the\r
- * crQUEUE_SEND example).\r
- *\r
- * @param pxResult The variable pointed to by pxResult will be set to pdPASS if\r
- * data was successfully retrieved from the queue, otherwise it will be set to\r
- * an error code as defined within ProjDefs.h.\r
- *\r
- * Example usage:\r
- <pre>\r
- // A co-routine receives the number of an LED to flash from a queue. It\r
- // blocks on the queue until the number is received.\r
- static void prvCoRoutineFlashWorkTask( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
- {\r
- // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
- static portBASE_TYPE xResult;\r
- static unsigned portBASE_TYPE uxLEDToFlash;\r
-\r
- // All co-routines must start with a call to crSTART().\r
- crSTART( xHandle );\r
-\r
- for( ;; )\r
- {\r
- // Wait for data to become available on the queue.\r
- crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );\r
-\r
- if( xResult == pdPASS )\r
- {\r
- // We received the LED to flash - flash it!\r
- vParTestToggleLED( uxLEDToFlash );\r
- }\r
- }\r
-\r
- crEND();\r
- }</pre>\r
- * \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE\r
- * \ingroup Tasks\r
- */\r
-#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \\r
-{ \\r
- *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), ( xTicksToWait ) ); \\r
- if( *( pxResult ) == errQUEUE_BLOCKED ) \\r
- { \\r
- crSET_STATE0( ( xHandle ) ); \\r
- *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), 0 ); \\r
- } \\r
- if( *( pxResult ) == errQUEUE_YIELD ) \\r
- { \\r
- crSET_STATE1( ( xHandle ) ); \\r
- *( pxResult ) = pdPASS; \\r
- } \\r
-}\r
-\r
-/**\r
- * croutine. h\r
- * <pre>\r
- crQUEUE_SEND_FROM_ISR(\r
- xQueueHandle pxQueue,\r
- void *pvItemToQueue,\r
- portBASE_TYPE xCoRoutinePreviouslyWoken\r
- )</pre>\r
- *\r
- * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the\r
- * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()\r
- * functions used by tasks.\r
- *\r
- * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to\r
- * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and\r
- * xQueueReceiveFromISR() can only be used to pass data between a task and and\r
- * ISR.\r
- *\r
- * crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue\r
- * that is being used from within a co-routine.\r
- *\r
- * See the co-routine section of the WEB documentation for information on\r
- * passing data between tasks and co-routines and between ISR's and\r
- * co-routines.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto\r
- * the same queue multiple times from a single interrupt. The first call\r
- * should always pass in pdFALSE. Subsequent calls should pass in\r
- * the value returned from the previous call.\r
- *\r
- * @return pdTRUE if a co-routine was woken by posting onto the queue. This is\r
- * used by the ISR to determine if a context switch may be required following\r
- * the ISR.\r
- *\r
- * Example usage:\r
- <pre>\r
- // A co-routine that blocks on a queue waiting for characters to be received.\r
- static void vReceivingCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
- {\r
- char cRxedChar;\r
- portBASE_TYPE xResult;\r
-\r
- // All co-routines must start with a call to crSTART().\r
- crSTART( xHandle );\r
-\r
- for( ;; )\r
- {\r
- // Wait for data to become available on the queue. This assumes the\r
- // queue xCommsRxQueue has already been created!\r
- crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );\r
-\r
- // Was a character received?\r
- if( xResult == pdPASS )\r
- {\r
- // Process the character here.\r
- }\r
- }\r
-\r
- // All co-routines must end with a call to crEND().\r
- crEND();\r
- }\r
-\r
- // An ISR that uses a queue to send characters received on a serial port to\r
- // a co-routine.\r
- void vUART_ISR( void )\r
- {\r
- char cRxedChar;\r
- portBASE_TYPE xCRWokenByPost = pdFALSE;\r
-\r
- // We loop around reading characters until there are none left in the UART.\r
- while( UART_RX_REG_NOT_EMPTY() )\r
- {\r
- // Obtain the character from the UART.\r
- cRxedChar = UART_RX_REG;\r
-\r
- // Post the character onto a queue. xCRWokenByPost will be pdFALSE\r
- // the first time around the loop. If the post causes a co-routine\r
- // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.\r
- // In this manner we can ensure that if more than one co-routine is\r
- // blocked on the queue only one is woken by this ISR no matter how\r
- // many characters are posted to the queue.\r
- xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );\r
- }\r
- }</pre>\r
- * \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR\r
- * \ingroup Tasks\r
- */\r
-#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )\r
-\r
-\r
-/**\r
- * croutine. h\r
- * <pre>\r
- crQUEUE_SEND_FROM_ISR(\r
- xQueueHandle pxQueue,\r
- void *pvBuffer,\r
- portBASE_TYPE * pxCoRoutineWoken\r
- )</pre>\r
- *\r
- * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the\r
- * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()\r
- * functions used by tasks.\r
- *\r
- * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to\r
- * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and\r
- * xQueueReceiveFromISR() can only be used to pass data between a task and and\r
- * ISR.\r
- *\r
- * crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data\r
- * from a queue that is being used from within a co-routine (a co-routine\r
- * posted to the queue).\r
- *\r
- * See the co-routine section of the WEB documentation for information on\r
- * passing data between tasks and co-routines and between ISR's and\r
- * co-routines.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvBuffer A pointer to a buffer into which the received item will be\r
- * placed. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from the queue into\r
- * pvBuffer.\r
- *\r
- * @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become\r
- * available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a\r
- * co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise\r
- * *pxCoRoutineWoken will remain unchanged.\r
- *\r
- * @return pdTRUE an item was successfully received from the queue, otherwise\r
- * pdFALSE.\r
- *\r
- * Example usage:\r
- <pre>\r
- // A co-routine that posts a character to a queue then blocks for a fixed\r
- // period. The character is incremented each time.\r
- static void vSendingCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
- {\r
- // cChar holds its value while this co-routine is blocked and must therefore\r
- // be declared static.\r
- static char cCharToTx = 'a';\r
- portBASE_TYPE xResult;\r
-\r
- // All co-routines must start with a call to crSTART().\r
- crSTART( xHandle );\r
-\r
- for( ;; )\r
- {\r
- // Send the next character to the queue.\r
- crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );\r
-\r
- if( xResult == pdPASS )\r
- {\r
- // The character was successfully posted to the queue.\r
- }\r
- else\r
- {\r
- // Could not post the character to the queue.\r
- }\r
-\r
- // Enable the UART Tx interrupt to cause an interrupt in this\r
- // hypothetical UART. The interrupt will obtain the character\r
- // from the queue and send it.\r
- ENABLE_RX_INTERRUPT();\r
-\r
- // Increment to the next character then block for a fixed period.\r
- // cCharToTx will maintain its value across the delay as it is\r
- // declared static.\r
- cCharToTx++;\r
- if( cCharToTx > 'x' )\r
- {\r
- cCharToTx = 'a';\r
- }\r
- crDELAY( 100 );\r
- }\r
-\r
- // All co-routines must end with a call to crEND().\r
- crEND();\r
- }\r
-\r
- // An ISR that uses a queue to receive characters to send on a UART.\r
- void vUART_ISR( void )\r
- {\r
- char cCharToTx;\r
- portBASE_TYPE xCRWokenByPost = pdFALSE;\r
-\r
- while( UART_TX_REG_EMPTY() )\r
- {\r
- // Are there any characters in the queue waiting to be sent?\r
- // xCRWokenByPost will automatically be set to pdTRUE if a co-routine\r
- // is woken by the post - ensuring that only a single co-routine is\r
- // woken no matter how many times we go around this loop.\r
- if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )\r
- {\r
- SEND_CHARACTER( cCharToTx );\r
- }\r
- }\r
- }</pre>\r
- * \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR\r
- * \ingroup Tasks\r
- */\r
-#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )\r
-\r
-/*\r
- * This function is intended for internal use by the co-routine macros only.\r
- * The macro nature of the co-routine implementation requires that the\r
- * prototype appears here. The function should not be used by application\r
- * writers.\r
- *\r
- * Removes the current co-routine from its ready list and places it in the\r
- * appropriate delayed list.\r
- */\r
-void vCoRoutineAddToDelayedList( portTickType xTicksToDelay, xList *pxEventList );\r
-\r
-/*\r
- * This function is intended for internal use by the queue implementation only.\r
- * The function should not be used by application writers.\r
- *\r
- * Removes the highest priority co-routine from the event list and places it in\r
- * the pending ready list.\r
- */\r
-signed portBASE_TYPE xCoRoutineRemoveFromEventList( const xList *pxEventList );\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif /* CO_ROUTINE_H */\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-/*\r
- * This is the list implementation used by the scheduler. While it is tailored\r
- * heavily for the schedulers needs, it is also available for use by\r
- * application code.\r
- *\r
- * xLists can only store pointers to xListItems. Each xListItem contains a\r
- * numeric value (xItemValue). Most of the time the lists are sorted in\r
- * descending item value order.\r
- *\r
- * Lists are created already containing one list item. The value of this\r
- * item is the maximum possible that can be stored, it is therefore always at\r
- * the end of the list and acts as a marker. The list member pxHead always\r
- * points to this marker - even though it is at the tail of the list. This\r
- * is because the tail contains a wrap back pointer to the true head of\r
- * the list.\r
- *\r
- * In addition to it's value, each list item contains a pointer to the next\r
- * item in the list (pxNext), a pointer to the list it is in (pxContainer)\r
- * and a pointer to back to the object that contains it. These later two\r
- * pointers are included for efficiency of list manipulation. There is\r
- * effectively a two way link between the object containing the list item and\r
- * the list item itself.\r
- *\r
- *\r
- * \page ListIntroduction List Implementation\r
- * \ingroup FreeRTOSIntro\r
- */\r
-\r
-\r
-#ifndef LIST_H\r
-#define LIST_H\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-/*\r
- * Definition of the only type of object that a list can contain.\r
- */\r
-struct xLIST_ITEM\r
-{\r
- portTickType xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */\r
- volatile struct xLIST_ITEM * pxNext; /*< Pointer to the next xListItem in the list. */\r
- volatile struct xLIST_ITEM * pxPrevious;/*< Pointer to the previous xListItem in the list. */\r
- void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */\r
- void * pvContainer; /*< Pointer to the list in which this list item is placed (if any). */\r
-};\r
-typedef struct xLIST_ITEM xListItem; /* For some reason lint wants this as two separate definitions. */\r
-\r
-struct xMINI_LIST_ITEM\r
-{\r
- portTickType xItemValue;\r
- volatile struct xLIST_ITEM *pxNext;\r
- volatile struct xLIST_ITEM *pxPrevious;\r
-};\r
-typedef struct xMINI_LIST_ITEM xMiniListItem;\r
-\r
-/*\r
- * Definition of the type of queue used by the scheduler.\r
- */\r
-typedef struct xLIST\r
-{\r
- volatile unsigned portBASE_TYPE uxNumberOfItems;\r
- volatile xListItem * pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to pvListGetOwnerOfNextEntry (). */\r
- volatile xMiniListItem xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */\r
-} xList;\r
-\r
-/*\r
- * Access macro to set the owner of a list item. The owner of a list item\r
- * is the object (usually a TCB) that contains the list item.\r
- *\r
- * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER\r
- * \ingroup LinkedList\r
- */\r
-#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( pxListItem )->pvOwner = ( void * ) ( pxOwner )\r
-\r
-/*\r
- * Access macro to get the owner of a list item. The owner of a list item\r
- * is the object (usually a TCB) that contains the list item.\r
- *\r
- * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER\r
- * \ingroup LinkedList\r
- */\r
-#define listGET_LIST_ITEM_OWNER( pxListItem ) ( pxListItem )->pvOwner\r
-\r
-/*\r
- * Access macro to set the value of the list item. In most cases the value is\r
- * used to sort the list in descending order.\r
- *\r
- * \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE\r
- * \ingroup LinkedList\r
- */\r
-#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( pxListItem )->xItemValue = ( xValue )\r
-\r
-/*\r
- * Access macro to retrieve the value of the list item. The value can\r
- * represent anything - for example a the priority of a task, or the time at\r
- * which a task should be unblocked.\r
- *\r
- * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE\r
- * \ingroup LinkedList\r
- */\r
-#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )\r
-\r
-/*\r
- * Access macro the retrieve the value of the list item at the head of a given\r
- * list.\r
- *\r
- * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE\r
- * \ingroup LinkedList\r
- */\r
-#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( (&( ( pxList )->xListEnd ))->pxNext->xItemValue )\r
-\r
-/*\r
- * Access macro to determine if a list contains any items. The macro will\r
- * only have the value true if the list is empty.\r
- *\r
- * \page listLIST_IS_EMPTY listLIST_IS_EMPTY\r
- * \ingroup LinkedList\r
- */\r
-#define listLIST_IS_EMPTY( pxList ) ( ( pxList )->uxNumberOfItems == ( unsigned portBASE_TYPE ) 0 )\r
-\r
-/*\r
- * Access macro to return the number of items in the list.\r
- */\r
-#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )\r
-\r
-/*\r
- * Access function to obtain the owner of the next entry in a list.\r
- *\r
- * The list member pxIndex is used to walk through a list. Calling\r
- * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list\r
- * and returns that entries pxOwner parameter. Using multiple calls to this\r
- * function it is therefore possible to move through every item contained in\r
- * a list.\r
- *\r
- * The pxOwner parameter of a list item is a pointer to the object that owns\r
- * the list item. In the scheduler this is normally a task control block.\r
- * The pxOwner parameter effectively creates a two way link between the list\r
- * item and its owner.\r
- *\r
- * @param pxList The list from which the next item owner is to be returned.\r
- *\r
- * \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY\r
- * \ingroup LinkedList\r
- */\r
-#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \\r
-{ \\r
-xList * const pxConstList = ( pxList ); \\r
- /* Increment the index to the next item and return the item, ensuring */ \\r
- /* we don't return the marker used at the end of the list. */ \\r
- ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \\r
- if( ( pxConstList )->pxIndex == ( xListItem * ) &( ( pxConstList )->xListEnd ) ) \\r
- { \\r
- ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \\r
- } \\r
- ( pxTCB ) = ( pxConstList )->pxIndex->pvOwner; \\r
-}\r
-\r
-\r
-/*\r
- * Access function to obtain the owner of the first entry in a list. Lists\r
- * are normally sorted in ascending item value order.\r
- *\r
- * This function returns the pxOwner member of the first item in the list.\r
- * The pxOwner parameter of a list item is a pointer to the object that owns\r
- * the list item. In the scheduler this is normally a task control block.\r
- * The pxOwner parameter effectively creates a two way link between the list\r
- * item and its owner.\r
- *\r
- * @param pxList The list from which the owner of the head item is to be\r
- * returned.\r
- *\r
- * \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY\r
- * \ingroup LinkedList\r
- */\r
-#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( (&( ( pxList )->xListEnd ))->pxNext->pvOwner )\r
-\r
-/*\r
- * Check to see if a list item is within a list. The list item maintains a\r
- * "container" pointer that points to the list it is in. All this macro does\r
- * is check to see if the container and the list match.\r
- *\r
- * @param pxList The list we want to know if the list item is within.\r
- * @param pxListItem The list item we want to know if is in the list.\r
- * @return pdTRUE is the list item is in the list, otherwise pdFALSE.\r
- * pointer against\r
- */\r
-#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( pxListItem )->pvContainer == ( void * ) ( pxList ) )\r
-\r
-/*\r
- * This provides a crude means of knowing if a list has been initialised, as\r
- * pxList->xListEnd.xItemValue is set to portMAX_DELAY by the vListInitialise()\r
- * function.\r
- */\r
-#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY )\r
-\r
-/*\r
- * Must be called before a list is used! This initialises all the members\r
- * of the list structure and inserts the xListEnd item into the list as a\r
- * marker to the back of the list.\r
- *\r
- * @param pxList Pointer to the list being initialised.\r
- *\r
- * \page vListInitialise vListInitialise\r
- * \ingroup LinkedList\r
- */\r
-void vListInitialise( xList *pxList );\r
-\r
-/*\r
- * Must be called before a list item is used. This sets the list container to\r
- * null so the item does not think that it is already contained in a list.\r
- *\r
- * @param pxItem Pointer to the list item being initialised.\r
- *\r
- * \page vListInitialiseItem vListInitialiseItem\r
- * \ingroup LinkedList\r
- */\r
-void vListInitialiseItem( xListItem *pxItem );\r
-\r
-/*\r
- * Insert a list item into a list. The item will be inserted into the list in\r
- * a position determined by its item value (descending item value order).\r
- *\r
- * @param pxList The list into which the item is to be inserted.\r
- *\r
- * @param pxNewListItem The item to that is to be placed in the list.\r
- *\r
- * \page vListInsert vListInsert\r
- * \ingroup LinkedList\r
- */\r
-void vListInsert( xList *pxList, xListItem *pxNewListItem );\r
-\r
-/*\r
- * Insert a list item into a list. The item will be inserted in a position\r
- * such that it will be the last item within the list returned by multiple\r
- * calls to listGET_OWNER_OF_NEXT_ENTRY.\r
- *\r
- * The list member pvIndex is used to walk through a list. Calling\r
- * listGET_OWNER_OF_NEXT_ENTRY increments pvIndex to the next item in the list.\r
- * Placing an item in a list using vListInsertEnd effectively places the item\r
- * in the list position pointed to by pvIndex. This means that every other\r
- * item within the list will be returned by listGET_OWNER_OF_NEXT_ENTRY before\r
- * the pvIndex parameter again points to the item being inserted.\r
- *\r
- * @param pxList The list into which the item is to be inserted.\r
- *\r
- * @param pxNewListItem The list item to be inserted into the list.\r
- *\r
- * \page vListInsertEnd vListInsertEnd\r
- * \ingroup LinkedList\r
- */\r
-void vListInsertEnd( xList *pxList, xListItem *pxNewListItem );\r
-\r
-/*\r
- * Remove an item from a list. The list item has a pointer to the list that\r
- * it is in, so only the list item need be passed into the function.\r
- *\r
- * @param vListRemove The item to be removed. The item will remove itself from\r
- * the list pointed to by it's pxContainer parameter.\r
- *\r
- * \page vListRemove vListRemove\r
- * \ingroup LinkedList\r
- */\r
-void vListRemove( xListItem *pxItemToRemove );\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-#ifndef MPU_WRAPPERS_H\r
-#define MPU_WRAPPERS_H\r
-\r
-/* This file redefines API functions to be called through a wrapper macro, but\r
-only for ports that are using the MPU. */\r
-#ifdef portUSING_MPU_WRAPPERS\r
-\r
- /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE will be defined when this file is\r
- included from queue.c or task.c to prevent it from having an effect within\r
- those files. */\r
- #ifndef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
- #define xTaskGenericCreate MPU_xTaskGenericCreate\r
- #define vTaskAllocateMPURegions MPU_vTaskAllocateMPURegions\r
- #define vTaskDelete MPU_vTaskDelete\r
- #define vTaskDelayUntil MPU_vTaskDelayUntil\r
- #define vTaskDelay MPU_vTaskDelay\r
- #define uxTaskPriorityGet MPU_uxTaskPriorityGet\r
- #define vTaskPrioritySet MPU_vTaskPrioritySet\r
- #define vTaskSuspend MPU_vTaskSuspend\r
- #define xTaskIsTaskSuspended MPU_xTaskIsTaskSuspended\r
- #define vTaskResume MPU_vTaskResume\r
- #define vTaskSuspendAll MPU_vTaskSuspendAll\r
- #define xTaskResumeAll MPU_xTaskResumeAll\r
- #define xTaskGetTickCount MPU_xTaskGetTickCount\r
- #define uxTaskGetNumberOfTasks MPU_uxTaskGetNumberOfTasks\r
- #define vTaskList MPU_vTaskList\r
- #define vTaskGetRunTimeStats MPU_vTaskGetRunTimeStats\r
- #define vTaskStartTrace MPU_vTaskStartTrace\r
- #define ulTaskEndTrace MPU_ulTaskEndTrace\r
- #define vTaskSetApplicationTaskTag MPU_vTaskSetApplicationTaskTag\r
- #define xTaskGetApplicationTaskTag MPU_xTaskGetApplicationTaskTag\r
- #define xTaskCallApplicationTaskHook MPU_xTaskCallApplicationTaskHook\r
- #define uxTaskGetStackHighWaterMark MPU_uxTaskGetStackHighWaterMark\r
- #define xTaskGetCurrentTaskHandle MPU_xTaskGetCurrentTaskHandle\r
- #define xTaskGetSchedulerState MPU_xTaskGetSchedulerState\r
-\r
- #define xQueueGenericCreate MPU_xQueueGenericCreate\r
- #define xQueueCreateMutex MPU_xQueueCreateMutex\r
- #define xQueueGiveMutexRecursive MPU_xQueueGiveMutexRecursive\r
- #define xQueueTakeMutexRecursive MPU_xQueueTakeMutexRecursive\r
- #define xQueueCreateCountingSemaphore MPU_xQueueCreateCountingSemaphore\r
- #define xQueueGenericSend MPU_xQueueGenericSend\r
- #define xQueueAltGenericSend MPU_xQueueAltGenericSend\r
- #define xQueueAltGenericReceive MPU_xQueueAltGenericReceive\r
- #define xQueueGenericReceive MPU_xQueueGenericReceive\r
- #define uxQueueMessagesWaiting MPU_uxQueueMessagesWaiting\r
- #define vQueueDelete MPU_vQueueDelete\r
-\r
- #define pvPortMalloc MPU_pvPortMalloc\r
- #define vPortFree MPU_vPortFree\r
- #define xPortGetFreeHeapSize MPU_xPortGetFreeHeapSize\r
- #define vPortInitialiseBlocks MPU_vPortInitialiseBlocks\r
-\r
- #if configQUEUE_REGISTRY_SIZE > 0\r
- #define vQueueAddToRegistry MPU_vQueueAddToRegistry\r
- #define vQueueUnregisterQueue MPU_vQueueUnregisterQueue\r
- #endif\r
-\r
- /* Remove the privileged function macro. */\r
- #define PRIVILEGED_FUNCTION\r
-\r
- #else /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */\r
-\r
- /* Ensure API functions go in the privileged execution section. */\r
- #define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions")))\r
- #define PRIVILEGED_DATA __attribute__((section("privileged_data")))\r
- //#define PRIVILEGED_DATA\r
-\r
- #endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */\r
-\r
-#else /* portUSING_MPU_WRAPPERS */\r
-\r
- #define PRIVILEGED_FUNCTION\r
- #define PRIVILEGED_DATA\r
- #define portUSING_MPU_WRAPPERS 0\r
-\r
-#endif /* portUSING_MPU_WRAPPERS */\r
-\r
-\r
-#endif /* MPU_WRAPPERS_H */\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-/*-----------------------------------------------------------\r
- * Portable layer API. Each function must be defined for each port.\r
- *----------------------------------------------------------*/\r
-\r
-#ifndef PORTABLE_H\r
-#define PORTABLE_H\r
-\r
-/* Include the macro file relevant to the port being used. */\r
-\r
-#ifdef OPEN_WATCOM_INDUSTRIAL_PC_PORT\r
- #include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h"\r
- typedef void ( __interrupt __far *pxISR )();\r
-#endif\r
-\r
-#ifdef OPEN_WATCOM_FLASH_LITE_186_PORT\r
- #include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h"\r
- typedef void ( __interrupt __far *pxISR )();\r
-#endif\r
-\r
-#ifdef GCC_MEGA_AVR\r
- #include "../portable/GCC/ATMega323/portmacro.h"\r
-#endif\r
-\r
-#ifdef IAR_MEGA_AVR\r
- #include "../portable/IAR/ATMega323/portmacro.h"\r
-#endif\r
-\r
-#ifdef MPLAB_PIC24_PORT\r
- #include "..\..\Source\portable\MPLAB\PIC24_dsPIC\portmacro.h"\r
-#endif\r
-\r
-#ifdef MPLAB_DSPIC_PORT\r
- #include "..\..\Source\portable\MPLAB\PIC24_dsPIC\portmacro.h"\r
-#endif\r
-\r
-#ifdef MPLAB_PIC18F_PORT\r
- #include "..\..\Source\portable\MPLAB\PIC18F\portmacro.h"\r
-#endif\r
-\r
-#ifdef MPLAB_PIC32MX_PORT\r
- #include "..\..\Source\portable\MPLAB\PIC32MX\portmacro.h"\r
-#endif\r
-\r
-#ifdef _FEDPICC\r
- #include "libFreeRTOS/Include/portmacro.h"\r
-#endif\r
-\r
-#ifdef SDCC_CYGNAL\r
- #include "../../Source/portable/SDCC/Cygnal/portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_ARM7\r
- #include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_ARM7_ECLIPSE\r
- #include "portmacro.h"\r
-#endif\r
-\r
-#ifdef ROWLEY_LPC23xx\r
- #include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h"\r
-#endif\r
-\r
-#ifdef IAR_MSP430\r
- #include "..\..\Source\portable\IAR\MSP430\portmacro.h" \r
-#endif\r
- \r
-#ifdef GCC_MSP430\r
- #include "../../Source/portable/GCC/MSP430F449/portmacro.h"\r
-#endif\r
-\r
-#ifdef ROWLEY_MSP430\r
- #include "../../Source/portable/Rowley/MSP430F449/portmacro.h"\r
-#endif\r
-\r
-#ifdef ARM7_LPC21xx_KEIL_RVDS\r
- #include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h"\r
-#endif\r
-\r
-#ifdef SAM7_GCC\r
- #include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h"\r
-#endif\r
-\r
-#ifdef SAM7_IAR\r
- #include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h"\r
-#endif\r
-\r
-#ifdef SAM9XE_IAR\r
- #include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h"\r
-#endif\r
-\r
-#ifdef LPC2000_IAR\r
- #include "..\..\Source\portable\IAR\LPC2000\portmacro.h"\r
-#endif\r
-\r
-#ifdef STR71X_IAR\r
- #include "..\..\Source\portable\IAR\STR71x\portmacro.h"\r
-#endif\r
-\r
-#ifdef STR75X_IAR\r
- #include "..\..\Source\portable\IAR\STR75x\portmacro.h"\r
-#endif\r
- \r
-#ifdef STR75X_GCC\r
- #include "..\..\Source\portable\GCC\STR75x\portmacro.h"\r
-#endif\r
-\r
-#ifdef STR91X_IAR\r
- #include "..\..\Source\portable\IAR\STR91x\portmacro.h"\r
-#endif\r
- \r
-#ifdef GCC_H8S\r
- #include "../../Source/portable/GCC/H8S2329/portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_AT91FR40008\r
- #include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h"\r
-#endif\r
-\r
-#ifdef RVDS_ARMCM3_LM3S102\r
- #include "../../Source/portable/RVDS/ARM_CM3/portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_ARMCM3_LM3S102\r
- #include "../../Source/portable/GCC/ARM_CM3/portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_ARMCM3\r
- #include "../../Source/portable/GCC/ARM_CM3/portmacro.h"\r
-#endif\r
-\r
-#ifdef IAR_ARM_CM3\r
- #include "../../Source/portable/IAR/ARM_CM3/portmacro.h"\r
-#endif\r
-\r
-#ifdef IAR_ARMCM3_LM\r
- #include "../../Source/portable/IAR/ARM_CM3/portmacro.h"\r
-#endif\r
- \r
-#ifdef HCS12_CODE_WARRIOR\r
- #include "../../Source/portable/CodeWarrior/HCS12/portmacro.h"\r
-#endif \r
-\r
-#ifdef MICROBLAZE_GCC\r
- #include "../../Source/portable/GCC/MicroBlaze/portmacro.h"\r
-#endif\r
-\r
-#ifdef TERN_EE\r
- #include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_HCS12\r
- #include "../../Source/portable/GCC/HCS12/portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_MCF5235\r
- #include "../../Source/portable/GCC/MCF5235/portmacro.h"\r
-#endif\r
-\r
-#ifdef COLDFIRE_V2_GCC\r
- #include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h"\r
-#endif\r
-\r
-#ifdef COLDFIRE_V2_CODEWARRIOR\r
- #include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_PPC405\r
- #include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h"\r
-#endif\r
-\r
-#ifdef GCC_PPC440\r
- #include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h"\r
-#endif\r
-\r
-#ifdef _16FX_SOFTUNE\r
- #include "..\..\Source\portable\Softune\MB96340\portmacro.h"\r
-#endif\r
-\r
-#ifdef BCC_INDUSTRIAL_PC_PORT\r
- /* A short file name has to be used in place of the normal\r
- FreeRTOSConfig.h when using the Borland compiler. */\r
- #include "frconfig.h"\r
- #include "..\portable\BCC\16BitDOS\PC\prtmacro.h"\r
- typedef void ( __interrupt __far *pxISR )();\r
-#endif\r
-\r
-#ifdef BCC_FLASH_LITE_186_PORT\r
- /* A short file name has to be used in place of the normal\r
- FreeRTOSConfig.h when using the Borland compiler. */\r
- #include "frconfig.h"\r
- #include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h"\r
- typedef void ( __interrupt __far *pxISR )();\r
-#endif\r
-\r
-#ifdef __GNUC__\r
- #ifdef __AVR32_AVR32A__\r
- #include "portmacro.h"\r
- #endif\r
-#endif\r
-\r
-#ifdef __ICCAVR32__\r
- #ifdef __CORE__\r
- #if __CORE__ == __AVR32A__\r
- #include "portmacro.h"\r
- #endif\r
- #endif\r
-#endif\r
-\r
-#ifdef __91467D\r
- #include "portmacro.h"\r
-#endif\r
-\r
-#ifdef __96340\r
- #include "portmacro.h"\r
-#endif\r
-\r
-\r
-#ifdef __IAR_V850ES_Fx3__\r
- #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
-#endif\r
-\r
-#ifdef __IAR_V850ES_Jx3__\r
- #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
-#endif\r
-\r
-#ifdef __IAR_V850ES_Jx3_L__\r
- #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
-#endif\r
-\r
-#ifdef __IAR_V850ES_Jx2__\r
- #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
-#endif\r
-\r
-#ifdef __IAR_V850ES_Hx2__\r
- #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
-#endif\r
-\r
-#ifdef __IAR_78K0R_Kx3__\r
- #include "../../Source/portable/IAR/78K0R/portmacro.h"\r
-#endif\r
- \r
-#ifdef __IAR_78K0R_Kx3L__\r
- #include "../../Source/portable/IAR/78K0R/portmacro.h"\r
-#endif\r
- \r
-/* Catch all to ensure portmacro.h is included in the build. Newer demos\r
-have the path as part of the project options, rather than as relative from\r
-the project location. If portENTER_CRITICAL() has not been defined then\r
-portmacro.h has not yet been included - as every portmacro.h provides a\r
-portENTER_CRITICAL() definition. Check the demo application for your demo\r
-to find the path to the correct portmacro.h file. */\r
-#ifndef portENTER_CRITICAL\r
- #include "portmacro.h" \r
-#endif\r
- \r
-#if portBYTE_ALIGNMENT == 8\r
- #define portBYTE_ALIGNMENT_MASK ( 0x0007 )\r
-#endif\r
-\r
-#if portBYTE_ALIGNMENT == 4\r
- #define portBYTE_ALIGNMENT_MASK ( 0x0003 )\r
-#endif\r
-\r
-#if portBYTE_ALIGNMENT == 2\r
- #define portBYTE_ALIGNMENT_MASK ( 0x0001 )\r
-#endif\r
-\r
-#if portBYTE_ALIGNMENT == 1\r
- #define portBYTE_ALIGNMENT_MASK ( 0x0000 )\r
-#endif\r
-\r
-#ifndef portBYTE_ALIGNMENT_MASK\r
- #error "Invalid portBYTE_ALIGNMENT definition"\r
-#endif\r
-\r
-#ifndef portNUM_CONFIGURABLE_REGIONS\r
- #define portNUM_CONFIGURABLE_REGIONS 1\r
-#endif\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-#include "mpu_wrappers.h"\r
-\r
-/*\r
- * Setup the stack of a new task so it is ready to be placed under the\r
- * scheduler control. The registers have to be placed on the stack in\r
- * the order that the port expects to find them.\r
- *\r
- */\r
-#if( portUSING_MPU_WRAPPERS == 1 )\r
- portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters, portBASE_TYPE xRunPrivileged ) PRIVILEGED_FUNCTION;\r
-#else\r
- portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters );\r
-#endif\r
-\r
-/*\r
- * Map to the memory management routines required for the port.\r
- */\r
-void *pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;\r
-void vPortFree( void *pv ) PRIVILEGED_FUNCTION;\r
-void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;\r
-size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Setup the hardware ready for the scheduler to take control. This generally\r
- * sets up a tick interrupt and sets timers for the correct tick frequency.\r
- */\r
-portBASE_TYPE xPortStartScheduler( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Undo any hardware/ISR setup that was performed by xPortStartScheduler() so\r
- * the hardware is left in its original condition after the scheduler stops\r
- * executing.\r
- */\r
-void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * The structures and methods of manipulating the MPU are contained within the\r
- * port layer.\r
- *\r
- * Fills the xMPUSettings structure with the memory region information\r
- * contained in xRegions.\r
- */\r
-#if( portUSING_MPU_WRAPPERS == 1 ) \r
- struct xMEMORY_REGION;\r
- void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, portSTACK_TYPE *pxBottomOfStack, unsigned short usStackDepth ) PRIVILEGED_FUNCTION;\r
-#endif\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif /* PORTABLE_H */\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-#ifndef PROJDEFS_H\r
-#define PROJDEFS_H\r
-\r
-/* Defines the prototype to which task functions must conform. */\r
-typedef void (*pdTASK_CODE)( void * );\r
-\r
-#define pdTRUE ( 1 )\r
-#define pdFALSE ( 0 )\r
-\r
-#define pdPASS ( 1 )\r
-#define pdFAIL ( 0 )\r
-#define errQUEUE_EMPTY ( 0 )\r
-#define errQUEUE_FULL ( 0 )\r
-\r
-/* Error definitions. */\r
-#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY ( -1 )\r
-#define errNO_TASK_TO_RUN ( -2 )\r
-#define errQUEUE_BLOCKED ( -4 )\r
-#define errQUEUE_YIELD ( -5 )\r
-\r
-#endif /* PROJDEFS_H */\r
-\r
-\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-\r
-#ifndef QUEUE_H\r
-#define QUEUE_H\r
-\r
-#ifndef INC_FREERTOS_H\r
- #error "include FreeRTOS.h" must appear in source files before "include queue.h"\r
-#endif\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-\r
-#include "mpu_wrappers.h"\r
-\r
-/**\r
- * Type by which queues are referenced. For example, a call to xQueueCreate\r
- * returns (via a pointer parameter) an xQueueHandle variable that can then\r
- * be used as a parameter to xQueueSend(), xQueueReceive(), etc.\r
- */\r
-typedef void * xQueueHandle;\r
-\r
-\r
-/* For internal use only. */\r
-#define queueSEND_TO_BACK ( 0 )\r
-#define queueSEND_TO_FRONT ( 1 )\r
-\r
-/* For internal use only. These definitions *must* match those in queue.c. */\r
-#define queueQUEUE_TYPE_BASE ( 0U )\r
-#define queueQUEUE_TYPE_MUTEX ( 1U )\r
-#define queueQUEUE_TYPE_COUNTING_SEMAPHORE ( 2U )\r
-#define queueQUEUE_TYPE_BINARY_SEMAPHORE ( 3U )\r
-#define queueQUEUE_TYPE_RECURSIVE_MUTEX ( 4U )\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- xQueueHandle xQueueCreate(\r
- unsigned portBASE_TYPE uxQueueLength,\r
- unsigned portBASE_TYPE uxItemSize\r
- );\r
- * </pre>\r
- *\r
- * Creates a new queue instance. This allocates the storage required by the\r
- * new queue and returns a handle for the queue.\r
- *\r
- * @param uxQueueLength The maximum number of items that the queue can contain.\r
- *\r
- * @param uxItemSize The number of bytes each item in the queue will require.\r
- * Items are queued by copy, not by reference, so this is the number of bytes\r
- * that will be copied for each posted item. Each item on the queue must be\r
- * the same size.\r
- *\r
- * @return If the queue is successfully create then a handle to the newly\r
- * created queue is returned. If the queue cannot be created then 0 is\r
- * returned.\r
- *\r
- * Example usage:\r
- <pre>\r
- struct AMessage\r
- {\r
- char ucMessageID;\r
- char ucData[ 20 ];\r
- };\r
-\r
- void vATask( void *pvParameters )\r
- {\r
- xQueueHandle xQueue1, xQueue2;\r
-\r
- // Create a queue capable of containing 10 unsigned long values.\r
- xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
- if( xQueue1 == 0 )\r
- {\r
- // Queue was not created and must not be used.\r
- }\r
-\r
- // Create a queue capable of containing 10 pointers to AMessage structures.\r
- // These should be passed by pointer as they contain a lot of data.\r
- xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
- if( xQueue2 == 0 )\r
- {\r
- // Queue was not created and must not be used.\r
- }\r
-\r
- // ... Rest of task code.\r
- }\r
- </pre>\r
- * \defgroup xQueueCreate xQueueCreate\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueueCreate( uxQueueLength, uxItemSize ) xQueueGenericCreate( uxQueueLength, uxItemSize, queueQUEUE_TYPE_BASE )\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueSendToToFront(\r
- xQueueHandle xQueue,\r
- const void * pvItemToQueue,\r
- portTickType xTicksToWait\r
- );\r
- * </pre>\r
- *\r
- * This is a macro that calls xQueueGenericSend().\r
- *\r
- * Post an item to the front of a queue. The item is queued by copy, not by\r
- * reference. This function must not be called from an interrupt service\r
- * routine. See xQueueSendFromISR () for an alternative which may be used\r
- * in an ISR.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param xTicksToWait The maximum amount of time the task should block\r
- * waiting for space to become available on the queue, should it already\r
- * be full. The call will return immediately if this is set to 0 and the\r
- * queue is full. The time is defined in tick periods so the constant\r
- * portTICK_RATE_MS should be used to convert to real time if this is required.\r
- *\r
- * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.\r
- *\r
- * Example usage:\r
- <pre>\r
- struct AMessage\r
- {\r
- char ucMessageID;\r
- char ucData[ 20 ];\r
- } xMessage;\r
-\r
- unsigned long ulVar = 10UL;\r
-\r
- void vATask( void *pvParameters )\r
- {\r
- xQueueHandle xQueue1, xQueue2;\r
- struct AMessage *pxMessage;\r
-\r
- // Create a queue capable of containing 10 unsigned long values.\r
- xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
-\r
- // Create a queue capable of containing 10 pointers to AMessage structures.\r
- // These should be passed by pointer as they contain a lot of data.\r
- xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
-\r
- // ...\r
-\r
- if( xQueue1 != 0 )\r
- {\r
- // Send an unsigned long. Wait for 10 ticks for space to become\r
- // available if necessary.\r
- if( xQueueSendToFront( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )\r
- {\r
- // Failed to post the message, even after 10 ticks.\r
- }\r
- }\r
-\r
- if( xQueue2 != 0 )\r
- {\r
- // Send a pointer to a struct AMessage object. Don't block if the\r
- // queue is already full.\r
- pxMessage = & xMessage;\r
- xQueueSendToFront( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );\r
- }\r
-\r
- // ... Rest of task code.\r
- }\r
- </pre>\r
- * \defgroup xQueueSend xQueueSend\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueueSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_FRONT )\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueSendToBack(\r
- xQueueHandle xQueue,\r
- const void * pvItemToQueue,\r
- portTickType xTicksToWait\r
- );\r
- * </pre>\r
- *\r
- * This is a macro that calls xQueueGenericSend().\r
- *\r
- * Post an item to the back of a queue. The item is queued by copy, not by\r
- * reference. This function must not be called from an interrupt service\r
- * routine. See xQueueSendFromISR () for an alternative which may be used\r
- * in an ISR.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param xTicksToWait The maximum amount of time the task should block\r
- * waiting for space to become available on the queue, should it already\r
- * be full. The call will return immediately if this is set to 0 and the queue\r
- * is full. The time is defined in tick periods so the constant\r
- * portTICK_RATE_MS should be used to convert to real time if this is required.\r
- *\r
- * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.\r
- *\r
- * Example usage:\r
- <pre>\r
- struct AMessage\r
- {\r
- char ucMessageID;\r
- char ucData[ 20 ];\r
- } xMessage;\r
-\r
- unsigned long ulVar = 10UL;\r
-\r
- void vATask( void *pvParameters )\r
- {\r
- xQueueHandle xQueue1, xQueue2;\r
- struct AMessage *pxMessage;\r
-\r
- // Create a queue capable of containing 10 unsigned long values.\r
- xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
-\r
- // Create a queue capable of containing 10 pointers to AMessage structures.\r
- // These should be passed by pointer as they contain a lot of data.\r
- xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
-\r
- // ...\r
-\r
- if( xQueue1 != 0 )\r
- {\r
- // Send an unsigned long. Wait for 10 ticks for space to become\r
- // available if necessary.\r
- if( xQueueSendToBack( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )\r
- {\r
- // Failed to post the message, even after 10 ticks.\r
- }\r
- }\r
-\r
- if( xQueue2 != 0 )\r
- {\r
- // Send a pointer to a struct AMessage object. Don't block if the\r
- // queue is already full.\r
- pxMessage = & xMessage;\r
- xQueueSendToBack( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );\r
- }\r
-\r
- // ... Rest of task code.\r
- }\r
- </pre>\r
- * \defgroup xQueueSend xQueueSend\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueueSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueSend(\r
- xQueueHandle xQueue,\r
- const void * pvItemToQueue,\r
- portTickType xTicksToWait\r
- );\r
- * </pre>\r
- *\r
- * This is a macro that calls xQueueGenericSend(). It is included for\r
- * backward compatibility with versions of FreeRTOS.org that did not\r
- * include the xQueueSendToFront() and xQueueSendToBack() macros. It is\r
- * equivalent to xQueueSendToBack().\r
- *\r
- * Post an item on a queue. The item is queued by copy, not by reference.\r
- * This function must not be called from an interrupt service routine.\r
- * See xQueueSendFromISR () for an alternative which may be used in an ISR.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param xTicksToWait The maximum amount of time the task should block\r
- * waiting for space to become available on the queue, should it already\r
- * be full. The call will return immediately if this is set to 0 and the\r
- * queue is full. The time is defined in tick periods so the constant\r
- * portTICK_RATE_MS should be used to convert to real time if this is required.\r
- *\r
- * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.\r
- *\r
- * Example usage:\r
- <pre>\r
- struct AMessage\r
- {\r
- char ucMessageID;\r
- char ucData[ 20 ];\r
- } xMessage;\r
-\r
- unsigned long ulVar = 10UL;\r
-\r
- void vATask( void *pvParameters )\r
- {\r
- xQueueHandle xQueue1, xQueue2;\r
- struct AMessage *pxMessage;\r
-\r
- // Create a queue capable of containing 10 unsigned long values.\r
- xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
-\r
- // Create a queue capable of containing 10 pointers to AMessage structures.\r
- // These should be passed by pointer as they contain a lot of data.\r
- xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
-\r
- // ...\r
-\r
- if( xQueue1 != 0 )\r
- {\r
- // Send an unsigned long. Wait for 10 ticks for space to become\r
- // available if necessary.\r
- if( xQueueSend( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )\r
- {\r
- // Failed to post the message, even after 10 ticks.\r
- }\r
- }\r
-\r
- if( xQueue2 != 0 )\r
- {\r
- // Send a pointer to a struct AMessage object. Don't block if the\r
- // queue is already full.\r
- pxMessage = & xMessage;\r
- xQueueSend( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );\r
- }\r
-\r
- // ... Rest of task code.\r
- }\r
- </pre>\r
- * \defgroup xQueueSend xQueueSend\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )\r
-\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueGenericSend(\r
- xQueueHandle xQueue,\r
- const void * pvItemToQueue,\r
- portTickType xTicksToWait\r
- portBASE_TYPE xCopyPosition\r
- );\r
- * </pre>\r
- *\r
- * It is preferred that the macros xQueueSend(), xQueueSendToFront() and\r
- * xQueueSendToBack() are used in place of calling this function directly.\r
- *\r
- * Post an item on a queue. The item is queued by copy, not by reference.\r
- * This function must not be called from an interrupt service routine.\r
- * See xQueueSendFromISR () for an alternative which may be used in an ISR.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param xTicksToWait The maximum amount of time the task should block\r
- * waiting for space to become available on the queue, should it already\r
- * be full. The call will return immediately if this is set to 0 and the\r
- * queue is full. The time is defined in tick periods so the constant\r
- * portTICK_RATE_MS should be used to convert to real time if this is required.\r
- *\r
- * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the\r
- * item at the back of the queue, or queueSEND_TO_FRONT to place the item\r
- * at the front of the queue (for high priority messages).\r
- *\r
- * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.\r
- *\r
- * Example usage:\r
- <pre>\r
- struct AMessage\r
- {\r
- char ucMessageID;\r
- char ucData[ 20 ];\r
- } xMessage;\r
-\r
- unsigned long ulVar = 10UL;\r
-\r
- void vATask( void *pvParameters )\r
- {\r
- xQueueHandle xQueue1, xQueue2;\r
- struct AMessage *pxMessage;\r
-\r
- // Create a queue capable of containing 10 unsigned long values.\r
- xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
-\r
- // Create a queue capable of containing 10 pointers to AMessage structures.\r
- // These should be passed by pointer as they contain a lot of data.\r
- xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
-\r
- // ...\r
-\r
- if( xQueue1 != 0 )\r
- {\r
- // Send an unsigned long. Wait for 10 ticks for space to become\r
- // available if necessary.\r
- if( xQueueGenericSend( xQueue1, ( void * ) &ulVar, ( portTickType ) 10, queueSEND_TO_BACK ) != pdPASS )\r
- {\r
- // Failed to post the message, even after 10 ticks.\r
- }\r
- }\r
-\r
- if( xQueue2 != 0 )\r
- {\r
- // Send a pointer to a struct AMessage object. Don't block if the\r
- // queue is already full.\r
- pxMessage = & xMessage;\r
- xQueueGenericSend( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0, queueSEND_TO_BACK );\r
- }\r
-\r
- // ... Rest of task code.\r
- }\r
- </pre>\r
- * \defgroup xQueueSend xQueueSend\r
- * \ingroup QueueManagement\r
- */\r
-signed portBASE_TYPE xQueueGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition );\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueuePeek(\r
- xQueueHandle xQueue,\r
- void *pvBuffer,\r
- portTickType xTicksToWait\r
- );</pre>\r
- *\r
- * This is a macro that calls the xQueueGenericReceive() function.\r
- *\r
- * Receive an item from a queue without removing the item from the queue.\r
- * The item is received by copy so a buffer of adequate size must be\r
- * provided. The number of bytes copied into the buffer was defined when\r
- * the queue was created.\r
- *\r
- * Successfully received items remain on the queue so will be returned again\r
- * by the next call, or a call to xQueueReceive().\r
- *\r
- * This macro must not be used in an interrupt service routine.\r
- *\r
- * @param pxQueue The handle to the queue from which the item is to be\r
- * received.\r
- *\r
- * @param pvBuffer Pointer to the buffer into which the received item will\r
- * be copied.\r
- *\r
- * @param xTicksToWait The maximum amount of time the task should block\r
- * waiting for an item to receive should the queue be empty at the time\r
- * of the call. The time is defined in tick periods so the constant\r
- * portTICK_RATE_MS should be used to convert to real time if this is required.\r
- * xQueuePeek() will return immediately if xTicksToWait is 0 and the queue\r
- * is empty.\r
- *\r
- * @return pdTRUE if an item was successfully received from the queue,\r
- * otherwise pdFALSE.\r
- *\r
- * Example usage:\r
- <pre>\r
- struct AMessage\r
- {\r
- char ucMessageID;\r
- char ucData[ 20 ];\r
- } xMessage;\r
-\r
- xQueueHandle xQueue;\r
-\r
- // Task to create a queue and post a value.\r
- void vATask( void *pvParameters )\r
- {\r
- struct AMessage *pxMessage;\r
-\r
- // Create a queue capable of containing 10 pointers to AMessage structures.\r
- // These should be passed by pointer as they contain a lot of data.\r
- xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
- if( xQueue == 0 )\r
- {\r
- // Failed to create the queue.\r
- }\r
-\r
- // ...\r
-\r
- // Send a pointer to a struct AMessage object. Don't block if the\r
- // queue is already full.\r
- pxMessage = & xMessage;\r
- xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );\r
-\r
- // ... Rest of task code.\r
- }\r
-\r
- // Task to peek the data from the queue.\r
- void vADifferentTask( void *pvParameters )\r
- {\r
- struct AMessage *pxRxedMessage;\r
-\r
- if( xQueue != 0 )\r
- {\r
- // Peek a message on the created queue. Block for 10 ticks if a\r
- // message is not immediately available.\r
- if( xQueuePeek( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )\r
- {\r
- // pcRxedMessage now points to the struct AMessage variable posted\r
- // by vATask, but the item still remains on the queue.\r
- }\r
- }\r
-\r
- // ... Rest of task code.\r
- }\r
- </pre>\r
- * \defgroup xQueueReceive xQueueReceive\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueuePeek( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdTRUE )\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueReceive(\r
- xQueueHandle xQueue,\r
- void *pvBuffer,\r
- portTickType xTicksToWait\r
- );</pre>\r
- *\r
- * This is a macro that calls the xQueueGenericReceive() function.\r
- *\r
- * Receive an item from a queue. The item is received by copy so a buffer of\r
- * adequate size must be provided. The number of bytes copied into the buffer\r
- * was defined when the queue was created.\r
- *\r
- * Successfully received items are removed from the queue.\r
- *\r
- * This function must not be used in an interrupt service routine. See\r
- * xQueueReceiveFromISR for an alternative that can.\r
- *\r
- * @param pxQueue The handle to the queue from which the item is to be\r
- * received.\r
- *\r
- * @param pvBuffer Pointer to the buffer into which the received item will\r
- * be copied.\r
- *\r
- * @param xTicksToWait The maximum amount of time the task should block\r
- * waiting for an item to receive should the queue be empty at the time\r
- * of the call. xQueueReceive() will return immediately if xTicksToWait\r
- * is zero and the queue is empty. The time is defined in tick periods so the\r
- * constant portTICK_RATE_MS should be used to convert to real time if this is\r
- * required.\r
- *\r
- * @return pdTRUE if an item was successfully received from the queue,\r
- * otherwise pdFALSE.\r
- *\r
- * Example usage:\r
- <pre>\r
- struct AMessage\r
- {\r
- char ucMessageID;\r
- char ucData[ 20 ];\r
- } xMessage;\r
-\r
- xQueueHandle xQueue;\r
-\r
- // Task to create a queue and post a value.\r
- void vATask( void *pvParameters )\r
- {\r
- struct AMessage *pxMessage;\r
-\r
- // Create a queue capable of containing 10 pointers to AMessage structures.\r
- // These should be passed by pointer as they contain a lot of data.\r
- xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
- if( xQueue == 0 )\r
- {\r
- // Failed to create the queue.\r
- }\r
-\r
- // ...\r
-\r
- // Send a pointer to a struct AMessage object. Don't block if the\r
- // queue is already full.\r
- pxMessage = & xMessage;\r
- xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );\r
-\r
- // ... Rest of task code.\r
- }\r
-\r
- // Task to receive from the queue.\r
- void vADifferentTask( void *pvParameters )\r
- {\r
- struct AMessage *pxRxedMessage;\r
-\r
- if( xQueue != 0 )\r
- {\r
- // Receive a message on the created queue. Block for 10 ticks if a\r
- // message is not immediately available.\r
- if( xQueueReceive( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )\r
- {\r
- // pcRxedMessage now points to the struct AMessage variable posted\r
- // by vATask.\r
- }\r
- }\r
-\r
- // ... Rest of task code.\r
- }\r
- </pre>\r
- * \defgroup xQueueReceive xQueueReceive\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueueReceive( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdFALSE )\r
-\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueGenericReceive(\r
- xQueueHandle xQueue,\r
- void *pvBuffer,\r
- portTickType xTicksToWait\r
- portBASE_TYPE xJustPeek\r
- );</pre>\r
- *\r
- * It is preferred that the macro xQueueReceive() be used rather than calling\r
- * this function directly.\r
- *\r
- * Receive an item from a queue. The item is received by copy so a buffer of\r
- * adequate size must be provided. The number of bytes copied into the buffer\r
- * was defined when the queue was created.\r
- *\r
- * This function must not be used in an interrupt service routine. See\r
- * xQueueReceiveFromISR for an alternative that can.\r
- *\r
- * @param pxQueue The handle to the queue from which the item is to be\r
- * received.\r
- *\r
- * @param pvBuffer Pointer to the buffer into which the received item will\r
- * be copied.\r
- *\r
- * @param xTicksToWait The maximum amount of time the task should block\r
- * waiting for an item to receive should the queue be empty at the time\r
- * of the call. The time is defined in tick periods so the constant\r
- * portTICK_RATE_MS should be used to convert to real time if this is required.\r
- * xQueueGenericReceive() will return immediately if the queue is empty and\r
- * xTicksToWait is 0.\r
- *\r
- * @param xJustPeek When set to true, the item received from the queue is not\r
- * actually removed from the queue - meaning a subsequent call to\r
- * xQueueReceive() will return the same item. When set to false, the item\r
- * being received from the queue is also removed from the queue.\r
- *\r
- * @return pdTRUE if an item was successfully received from the queue,\r
- * otherwise pdFALSE.\r
- *\r
- * Example usage:\r
- <pre>\r
- struct AMessage\r
- {\r
- char ucMessageID;\r
- char ucData[ 20 ];\r
- } xMessage;\r
-\r
- xQueueHandle xQueue;\r
-\r
- // Task to create a queue and post a value.\r
- void vATask( void *pvParameters )\r
- {\r
- struct AMessage *pxMessage;\r
-\r
- // Create a queue capable of containing 10 pointers to AMessage structures.\r
- // These should be passed by pointer as they contain a lot of data.\r
- xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
- if( xQueue == 0 )\r
- {\r
- // Failed to create the queue.\r
- }\r
-\r
- // ...\r
-\r
- // Send a pointer to a struct AMessage object. Don't block if the\r
- // queue is already full.\r
- pxMessage = & xMessage;\r
- xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );\r
-\r
- // ... Rest of task code.\r
- }\r
-\r
- // Task to receive from the queue.\r
- void vADifferentTask( void *pvParameters )\r
- {\r
- struct AMessage *pxRxedMessage;\r
-\r
- if( xQueue != 0 )\r
- {\r
- // Receive a message on the created queue. Block for 10 ticks if a\r
- // message is not immediately available.\r
- if( xQueueGenericReceive( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )\r
- {\r
- // pcRxedMessage now points to the struct AMessage variable posted\r
- // by vATask.\r
- }\r
- }\r
-\r
- // ... Rest of task code.\r
- }\r
- </pre>\r
- * \defgroup xQueueReceive xQueueReceive\r
- * \ingroup QueueManagement\r
- */\r
-signed portBASE_TYPE xQueueGenericReceive( xQueueHandle xQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeek );\r
-\r
-/**\r
- * queue. h\r
- * <pre>unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle xQueue );</pre>\r
- *\r
- * Return the number of messages stored in a queue.\r
- *\r
- * @param xQueue A handle to the queue being queried.\r
- *\r
- * @return The number of messages available in the queue.\r
- *\r
- * \page uxQueueMessagesWaiting uxQueueMessagesWaiting\r
- * \ingroup QueueManagement\r
- */\r
-unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle xQueue );\r
-\r
-/**\r
- * queue. h\r
- * <pre>void vQueueDelete( xQueueHandle xQueue );</pre>\r
- *\r
- * Delete a queue - freeing all the memory allocated for storing of items\r
- * placed on the queue.\r
- *\r
- * @param xQueue A handle to the queue to be deleted.\r
- *\r
- * \page vQueueDelete vQueueDelete\r
- * \ingroup QueueManagement\r
- */\r
-void vQueueDelete( xQueueHandle pxQueue );\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueSendToFrontFromISR(\r
- xQueueHandle pxQueue,\r
- const void *pvItemToQueue,\r
- portBASE_TYPE *pxHigherPriorityTaskWoken\r
- );\r
- </pre>\r
- *\r
- * This is a macro that calls xQueueGenericSendFromISR().\r
- *\r
- * Post an item to the front of a queue. It is safe to use this macro from\r
- * within an interrupt service routine.\r
- *\r
- * Items are queued by copy not reference so it is preferable to only\r
- * queue small items, especially when called from an ISR. In most cases\r
- * it would be preferable to store a pointer to the item being queued.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param pxHigherPriorityTaskWoken xQueueSendToFrontFromISR() will set\r
- * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task\r
- * to unblock, and the unblocked task has a priority higher than the currently\r
- * running task. If xQueueSendToFromFromISR() sets this value to pdTRUE then\r
- * a context switch should be requested before the interrupt is exited.\r
- *\r
- * @return pdTRUE if the data was successfully sent to the queue, otherwise\r
- * errQUEUE_FULL.\r
- *\r
- * Example usage for buffered IO (where the ISR can obtain more than one value\r
- * per call):\r
- <pre>\r
- void vBufferISR( void )\r
- {\r
- char cIn;\r
- portBASE_TYPE xHigherPrioritTaskWoken;\r
-\r
- // We have not woken a task at the start of the ISR.\r
- xHigherPriorityTaskWoken = pdFALSE;\r
-\r
- // Loop until the buffer is empty.\r
- do\r
- {\r
- // Obtain a byte from the buffer.\r
- cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );\r
-\r
- // Post the byte.\r
- xQueueSendToFrontFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );\r
-\r
- } while( portINPUT_BYTE( BUFFER_COUNT ) );\r
-\r
- // Now the buffer is empty we can switch context if necessary.\r
- if( xHigherPriorityTaskWoken )\r
- {\r
- taskYIELD ();\r
- }\r
- }\r
- </pre>\r
- *\r
- * \defgroup xQueueSendFromISR xQueueSendFromISR\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueueSendToFrontFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_FRONT )\r
-\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueSendToBackFromISR(\r
- xQueueHandle pxQueue,\r
- const void *pvItemToQueue,\r
- portBASE_TYPE *pxHigherPriorityTaskWoken\r
- );\r
- </pre>\r
- *\r
- * This is a macro that calls xQueueGenericSendFromISR().\r
- *\r
- * Post an item to the back of a queue. It is safe to use this macro from\r
- * within an interrupt service routine.\r
- *\r
- * Items are queued by copy not reference so it is preferable to only\r
- * queue small items, especially when called from an ISR. In most cases\r
- * it would be preferable to store a pointer to the item being queued.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param pxHigherPriorityTaskWoken xQueueSendToBackFromISR() will set\r
- * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task\r
- * to unblock, and the unblocked task has a priority higher than the currently\r
- * running task. If xQueueSendToBackFromISR() sets this value to pdTRUE then\r
- * a context switch should be requested before the interrupt is exited.\r
- *\r
- * @return pdTRUE if the data was successfully sent to the queue, otherwise\r
- * errQUEUE_FULL.\r
- *\r
- * Example usage for buffered IO (where the ISR can obtain more than one value\r
- * per call):\r
- <pre>\r
- void vBufferISR( void )\r
- {\r
- char cIn;\r
- portBASE_TYPE xHigherPriorityTaskWoken;\r
-\r
- // We have not woken a task at the start of the ISR.\r
- xHigherPriorityTaskWoken = pdFALSE;\r
-\r
- // Loop until the buffer is empty.\r
- do\r
- {\r
- // Obtain a byte from the buffer.\r
- cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );\r
-\r
- // Post the byte.\r
- xQueueSendToBackFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );\r
-\r
- } while( portINPUT_BYTE( BUFFER_COUNT ) );\r
-\r
- // Now the buffer is empty we can switch context if necessary.\r
- if( xHigherPriorityTaskWoken )\r
- {\r
- taskYIELD ();\r
- }\r
- }\r
- </pre>\r
- *\r
- * \defgroup xQueueSendFromISR xQueueSendFromISR\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueueSendToBackFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueSendFromISR(\r
- xQueueHandle pxQueue,\r
- const void *pvItemToQueue,\r
- portBASE_TYPE *pxHigherPriorityTaskWoken\r
- );\r
- </pre>\r
- *\r
- * This is a macro that calls xQueueGenericSendFromISR(). It is included\r
- * for backward compatibility with versions of FreeRTOS.org that did not\r
- * include the xQueueSendToBackFromISR() and xQueueSendToFrontFromISR()\r
- * macros.\r
- *\r
- * Post an item to the back of a queue. It is safe to use this function from\r
- * within an interrupt service routine.\r
- *\r
- * Items are queued by copy not reference so it is preferable to only\r
- * queue small items, especially when called from an ISR. In most cases\r
- * it would be preferable to store a pointer to the item being queued.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param pxHigherPriorityTaskWoken xQueueSendFromISR() will set\r
- * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task\r
- * to unblock, and the unblocked task has a priority higher than the currently\r
- * running task. If xQueueSendFromISR() sets this value to pdTRUE then\r
- * a context switch should be requested before the interrupt is exited.\r
- *\r
- * @return pdTRUE if the data was successfully sent to the queue, otherwise\r
- * errQUEUE_FULL.\r
- *\r
- * Example usage for buffered IO (where the ISR can obtain more than one value\r
- * per call):\r
- <pre>\r
- void vBufferISR( void )\r
- {\r
- char cIn;\r
- portBASE_TYPE xHigherPriorityTaskWoken;\r
-\r
- // We have not woken a task at the start of the ISR.\r
- xHigherPriorityTaskWoken = pdFALSE;\r
-\r
- // Loop until the buffer is empty.\r
- do\r
- {\r
- // Obtain a byte from the buffer.\r
- cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );\r
-\r
- // Post the byte.\r
- xQueueSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );\r
-\r
- } while( portINPUT_BYTE( BUFFER_COUNT ) );\r
-\r
- // Now the buffer is empty we can switch context if necessary.\r
- if( xHigherPriorityTaskWoken )\r
- {\r
- // Actual macro used here is port specific.\r
- taskYIELD_FROM_ISR ();\r
- }\r
- }\r
- </pre>\r
- *\r
- * \defgroup xQueueSendFromISR xQueueSendFromISR\r
- * \ingroup QueueManagement\r
- */\r
-#define xQueueSendFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueGenericSendFromISR(\r
- xQueueHandle pxQueue,\r
- const void *pvItemToQueue,\r
- portBASE_TYPE *pxHigherPriorityTaskWoken,\r
- portBASE_TYPE xCopyPosition\r
- );\r
- </pre>\r
- *\r
- * It is preferred that the macros xQueueSendFromISR(),\r
- * xQueueSendToFrontFromISR() and xQueueSendToBackFromISR() be used in place\r
- * of calling this function directly.\r
- *\r
- * Post an item on a queue. It is safe to use this function from within an\r
- * interrupt service routine.\r
- *\r
- * Items are queued by copy not reference so it is preferable to only\r
- * queue small items, especially when called from an ISR. In most cases\r
- * it would be preferable to store a pointer to the item being queued.\r
- *\r
- * @param xQueue The handle to the queue on which the item is to be posted.\r
- *\r
- * @param pvItemToQueue A pointer to the item that is to be placed on the\r
- * queue. The size of the items the queue will hold was defined when the\r
- * queue was created, so this many bytes will be copied from pvItemToQueue\r
- * into the queue storage area.\r
- *\r
- * @param pxHigherPriorityTaskWoken xQueueGenericSendFromISR() will set\r
- * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task\r
- * to unblock, and the unblocked task has a priority higher than the currently\r
- * running task. If xQueueGenericSendFromISR() sets this value to pdTRUE then\r
- * a context switch should be requested before the interrupt is exited.\r
- *\r
- * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the\r
- * item at the back of the queue, or queueSEND_TO_FRONT to place the item\r
- * at the front of the queue (for high priority messages).\r
- *\r
- * @return pdTRUE if the data was successfully sent to the queue, otherwise\r
- * errQUEUE_FULL.\r
- *\r
- * Example usage for buffered IO (where the ISR can obtain more than one value\r
- * per call):\r
- <pre>\r
- void vBufferISR( void )\r
- {\r
- char cIn;\r
- portBASE_TYPE xHigherPriorityTaskWokenByPost;\r
-\r
- // We have not woken a task at the start of the ISR.\r
- xHigherPriorityTaskWokenByPost = pdFALSE;\r
-\r
- // Loop until the buffer is empty.\r
- do\r
- {\r
- // Obtain a byte from the buffer.\r
- cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );\r
-\r
- // Post each byte.\r
- xQueueGenericSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWokenByPost, queueSEND_TO_BACK );\r
-\r
- } while( portINPUT_BYTE( BUFFER_COUNT ) );\r
-\r
- // Now the buffer is empty we can switch context if necessary. Note that the\r
- // name of the yield function required is port specific.\r
- if( xHigherPriorityTaskWokenByPost )\r
- {\r
- taskYIELD_YIELD_FROM_ISR();\r
- }\r
- }\r
- </pre>\r
- *\r
- * \defgroup xQueueSendFromISR xQueueSendFromISR\r
- * \ingroup QueueManagement\r
- */\r
-signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition );\r
-\r
-/**\r
- * queue. h\r
- * <pre>\r
- portBASE_TYPE xQueueReceiveFromISR(\r
- xQueueHandle pxQueue,\r
- void *pvBuffer,\r
- portBASE_TYPE *pxTaskWoken\r
- );\r
- * </pre>\r
- *\r
- * Receive an item from a queue. It is safe to use this function from within an\r
- * interrupt service routine.\r
- *\r
- * @param pxQueue The handle to the queue from which the item is to be\r
- * received.\r
- *\r
- * @param pvBuffer Pointer to the buffer into which the received item will\r
- * be copied.\r
- *\r
- * @param pxTaskWoken A task may be blocked waiting for space to become\r
- * available on the queue. If xQueueReceiveFromISR causes such a task to\r
- * unblock *pxTaskWoken will get set to pdTRUE, otherwise *pxTaskWoken will\r
- * remain unchanged.\r
- *\r
- * @return pdTRUE if an item was successfully received from the queue,\r
- * otherwise pdFALSE.\r
- *\r
- * Example usage:\r
- <pre>\r
-\r
- xQueueHandle xQueue;\r
-\r
- // Function to create a queue and post some values.\r
- void vAFunction( void *pvParameters )\r
- {\r
- char cValueToPost;\r
- const portTickType xBlockTime = ( portTickType )0xff;\r
-\r
- // Create a queue capable of containing 10 characters.\r
- xQueue = xQueueCreate( 10, sizeof( char ) );\r
- if( xQueue == 0 )\r
- {\r
- // Failed to create the queue.\r
- }\r
-\r
- // ...\r
-\r
- // Post some characters that will be used within an ISR. If the queue\r
- // is full then this task will block for xBlockTime ticks.\r
- cValueToPost = 'a';\r
- xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );\r
- cValueToPost = 'b';\r
- xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );\r
-\r
- // ... keep posting characters ... this task may block when the queue\r
- // becomes full.\r
-\r
- cValueToPost = 'c';\r
- xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );\r
- }\r
-\r
- // ISR that outputs all the characters received on the queue.\r
- void vISR_Routine( void )\r
- {\r
- portBASE_TYPE xTaskWokenByReceive = pdFALSE;\r
- char cRxedChar;\r
-\r
- while( xQueueReceiveFromISR( xQueue, ( void * ) &cRxedChar, &xTaskWokenByReceive) )\r
- {\r
- // A character was received. Output the character now.\r
- vOutputCharacter( cRxedChar );\r
-\r
- // If removing the character from the queue woke the task that was\r
- // posting onto the queue cTaskWokenByReceive will have been set to\r
- // pdTRUE. No matter how many times this loop iterates only one\r
- // task will be woken.\r
- }\r
-\r
- if( cTaskWokenByPost != ( char ) pdFALSE;\r
- {\r
- taskYIELD ();\r
- }\r
- }\r
- </pre>\r
- * \defgroup xQueueReceiveFromISR xQueueReceiveFromISR\r
- * \ingroup QueueManagement\r
- */\r
-signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxHigherPriorityTaskWoken );\r
-\r
-/*\r
- * Utilities to query queues that are safe to use from an ISR. These utilities\r
- * should be used only from witin an ISR, or within a critical section.\r
- */\r
-signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue );\r
-signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue );\r
-unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue );\r
-\r
-\r
-/*\r
- * xQueueAltGenericSend() is an alternative version of xQueueGenericSend().\r
- * Likewise xQueueAltGenericReceive() is an alternative version of\r
- * xQueueGenericReceive().\r
- *\r
- * The source code that implements the alternative (Alt) API is much\r
- * simpler because it executes everything from within a critical section.\r
- * This is the approach taken by many other RTOSes, but FreeRTOS.org has the\r
- * preferred fully featured API too. The fully featured API has more\r
- * complex code that takes longer to execute, but makes much less use of\r
- * critical sections. Therefore the alternative API sacrifices interrupt\r
- * responsiveness to gain execution speed, whereas the fully featured API\r
- * sacrifices execution speed to ensure better interrupt responsiveness.\r
- */\r
-signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition );\r
-signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking );\r
-#define xQueueAltSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueAltGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_FRONT )\r
-#define xQueueAltSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueAltGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )\r
-#define xQueueAltReceive( xQueue, pvBuffer, xTicksToWait ) xQueueAltGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdFALSE )\r
-#define xQueueAltPeek( xQueue, pvBuffer, xTicksToWait ) xQueueAltGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdTRUE )\r
-\r
-/*\r
- * The functions defined above are for passing data to and from tasks. The\r
- * functions below are the equivalents for passing data to and from\r
- * co-routines.\r
- *\r
- * These functions are called from the co-routine macro implementation and\r
- * should not be called directly from application code. Instead use the macro\r
- * wrappers defined within croutine.h.\r
- */\r
-signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken );\r
-signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxTaskWoken );\r
-signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait );\r
-signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait );\r
-\r
-/*\r
- * For internal use only. Use xSemaphoreCreateMutex(), \r
- * xSemaphoreCreateCounting() or xSemaphoreGetMutexHolder() instead of calling \r
- * these functions directly.\r
- */\r
-xQueueHandle xQueueCreateMutex( unsigned char ucQueueType );\r
-xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount );\r
-void* xQueueGetMutexHolder( xQueueHandle xSemaphore );\r
-\r
-/*\r
- * For internal use only. Use xSemaphoreTakeMutexRecursive() or\r
- * xSemaphoreGiveMutexRecursive() instead of calling these functions directly.\r
- */\r
-portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle pxMutex, portTickType xBlockTime );\r
-portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle pxMutex );\r
-\r
-/*\r
- * Reset a queue back to its original empty state. pdPASS is returned if the\r
- * queue is successfully reset. pdFAIL is returned if the queue could not be\r
- * reset because there are tasks blocked on the queue waiting to either\r
- * receive from the queue or send to the queue.\r
- */\r
-#define xQueueReset( pxQueue ) xQueueGenericReset( pxQueue, pdFALSE )\r
-\r
-/*\r
- * The registry is provided as a means for kernel aware debuggers to\r
- * locate queues, semaphores and mutexes. Call vQueueAddToRegistry() add\r
- * a queue, semaphore or mutex handle to the registry if you want the handle\r
- * to be available to a kernel aware debugger. If you are not using a kernel\r
- * aware debugger then this function can be ignored.\r
- *\r
- * configQUEUE_REGISTRY_SIZE defines the maximum number of handles the\r
- * registry can hold. configQUEUE_REGISTRY_SIZE must be greater than 0\r
- * within FreeRTOSConfig.h for the registry to be available. Its value\r
- * does not effect the number of queues, semaphores and mutexes that can be\r
- * created - just the number that the registry can hold.\r
- *\r
- * @param xQueue The handle of the queue being added to the registry. This\r
- * is the handle returned by a call to xQueueCreate(). Semaphore and mutex\r
- * handles can also be passed in here.\r
- *\r
- * @param pcName The name to be associated with the handle. This is the\r
- * name that the kernel aware debugger will display.\r
- */\r
-#if configQUEUE_REGISTRY_SIZE > 0U\r
- void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcName );\r
-#endif\r
-\r
-/*\r
- * Generic version of the queue creation function, which is in turn called by \r
- * any queue, semaphore or mutex creation function or macro.\r
- */\r
-xQueueHandle xQueueGenericCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize, unsigned char ucQueueType );\r
-\r
-/* Not public API functions. */\r
-void vQueueWaitForMessageRestricted( xQueueHandle pxQueue, portTickType xTicksToWait );\r
-portBASE_TYPE xQueueGenericReset( xQueueHandle pxQueue, portBASE_TYPE xNewQueue );\r
-\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif /* QUEUE_H */\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-#ifndef SEMAPHORE_H\r
-#define SEMAPHORE_H\r
-\r
-#ifndef INC_FREERTOS_H\r
- #error "include FreeRTOS.h" must appear in source files before "include semphr.h"\r
-#endif\r
-\r
-#include "queue.h"\r
-\r
-typedef xQueueHandle xSemaphoreHandle;\r
-\r
-#define semBINARY_SEMAPHORE_QUEUE_LENGTH ( ( unsigned char ) 1U )\r
-#define semSEMAPHORE_QUEUE_ITEM_LENGTH ( ( unsigned char ) 0U )\r
-#define semGIVE_BLOCK_TIME ( ( portTickType ) 0U )\r
-\r
-\r
-/**\r
- * semphr. h\r
- * <pre>vSemaphoreCreateBinary( xSemaphoreHandle xSemaphore )</pre>\r
- *\r
- * <i>Macro</i> that implements a semaphore by using the existing queue mechanism.\r
- * The queue length is 1 as this is a binary semaphore. The data size is 0\r
- * as we don't want to actually store any data - we just want to know if the\r
- * queue is empty or full.\r
- *\r
- * This type of semaphore can be used for pure synchronisation between tasks or\r
- * between an interrupt and a task. The semaphore need not be given back once\r
- * obtained, so one task/interrupt can continuously 'give' the semaphore while\r
- * another continuously 'takes' the semaphore. For this reason this type of\r
- * semaphore does not use a priority inheritance mechanism. For an alternative\r
- * that does use priority inheritance see xSemaphoreCreateMutex().\r
- *\r
- * @param xSemaphore Handle to the created semaphore. Should be of type xSemaphoreHandle.\r
- *\r
- * Example usage:\r
- <pre>\r
- xSemaphoreHandle xSemaphore;\r
-\r
- void vATask( void * pvParameters )\r
- {\r
- // Semaphore cannot be used before a call to vSemaphoreCreateBinary ().\r
- // This is a macro so pass the variable in directly.\r
- vSemaphoreCreateBinary( xSemaphore );\r
-\r
- if( xSemaphore != NULL )\r
- {\r
- // The semaphore was created successfully.\r
- // The semaphore can now be used. \r
- }\r
- }\r
- </pre>\r
- * \defgroup vSemaphoreCreateBinary vSemaphoreCreateBinary\r
- * \ingroup Semaphores\r
- */\r
-#define vSemaphoreCreateBinary( xSemaphore ) \\r
- { \\r
- ( xSemaphore ) = xQueueGenericCreate( ( unsigned portBASE_TYPE ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE ); \\r
- if( ( xSemaphore ) != NULL ) \\r
- { \\r
- xSemaphoreGive( ( xSemaphore ) ); \\r
- } \\r
- }\r
-\r
-/**\r
- * semphr. h\r
- * <pre>xSemaphoreTake( \r
- * xSemaphoreHandle xSemaphore, \r
- * portTickType xBlockTime \r
- * )</pre>\r
- *\r
- * <i>Macro</i> to obtain a semaphore. The semaphore must have previously been\r
- * created with a call to vSemaphoreCreateBinary(), xSemaphoreCreateMutex() or\r
- * xSemaphoreCreateCounting().\r
- *\r
- * @param xSemaphore A handle to the semaphore being taken - obtained when\r
- * the semaphore was created.\r
- *\r
- * @param xBlockTime The time in ticks to wait for the semaphore to become\r
- * available. The macro portTICK_RATE_MS can be used to convert this to a\r
- * real time. A block time of zero can be used to poll the semaphore. A block\r
- * time of portMAX_DELAY can be used to block indefinitely (provided\r
- * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h).\r
- *\r
- * @return pdTRUE if the semaphore was obtained. pdFALSE\r
- * if xBlockTime expired without the semaphore becoming available.\r
- *\r
- * Example usage:\r
- <pre>\r
- xSemaphoreHandle xSemaphore = NULL;\r
-\r
- // A task that creates a semaphore.\r
- void vATask( void * pvParameters )\r
- {\r
- // Create the semaphore to guard a shared resource.\r
- vSemaphoreCreateBinary( xSemaphore );\r
- }\r
-\r
- // A task that uses the semaphore.\r
- void vAnotherTask( void * pvParameters )\r
- {\r
- // ... Do other things.\r
-\r
- if( xSemaphore != NULL )\r
- {\r
- // See if we can obtain the semaphore. If the semaphore is not available\r
- // wait 10 ticks to see if it becomes free. \r
- if( xSemaphoreTake( xSemaphore, ( portTickType ) 10 ) == pdTRUE )\r
- {\r
- // We were able to obtain the semaphore and can now access the\r
- // shared resource.\r
-\r
- // ...\r
-\r
- // We have finished accessing the shared resource. Release the \r
- // semaphore.\r
- xSemaphoreGive( xSemaphore );\r
- }\r
- else\r
- {\r
- // We could not obtain the semaphore and can therefore not access\r
- // the shared resource safely.\r
- }\r
- }\r
- }\r
- </pre>\r
- * \defgroup xSemaphoreTake xSemaphoreTake\r
- * \ingroup Semaphores\r
- */\r
-#define xSemaphoreTake( xSemaphore, xBlockTime ) xQueueGenericReceive( ( xQueueHandle ) ( xSemaphore ), NULL, ( xBlockTime ), pdFALSE )\r
-\r
-/**\r
- * semphr. h\r
- * xSemaphoreTakeRecursive( \r
- * xSemaphoreHandle xMutex, \r
- * portTickType xBlockTime \r
- * )\r
- *\r
- * <i>Macro</i> to recursively obtain, or 'take', a mutex type semaphore. \r
- * The mutex must have previously been created using a call to \r
- * xSemaphoreCreateRecursiveMutex();\r
- * \r
- * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this\r
- * macro to be available.\r
- * \r
- * This macro must not be used on mutexes created using xSemaphoreCreateMutex().\r
- *\r
- * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex \r
- * doesn't become available again until the owner has called \r
- * xSemaphoreGiveRecursive() for each successful 'take' request. For example, \r
- * if a task successfully 'takes' the same mutex 5 times then the mutex will \r
- * not be available to any other task until it has also 'given' the mutex back\r
- * exactly five times.\r
- *\r
- * @param xMutex A handle to the mutex being obtained. This is the\r
- * handle returned by xSemaphoreCreateRecursiveMutex();\r
- *\r
- * @param xBlockTime The time in ticks to wait for the semaphore to become\r
- * available. The macro portTICK_RATE_MS can be used to convert this to a\r
- * real time. A block time of zero can be used to poll the semaphore. If\r
- * the task already owns the semaphore then xSemaphoreTakeRecursive() will\r
- * return immediately no matter what the value of xBlockTime. \r
- *\r
- * @return pdTRUE if the semaphore was obtained. pdFALSE if xBlockTime\r
- * expired without the semaphore becoming available.\r
- *\r
- * Example usage:\r
- <pre>\r
- xSemaphoreHandle xMutex = NULL;\r
-\r
- // A task that creates a mutex.\r
- void vATask( void * pvParameters )\r
- {\r
- // Create the mutex to guard a shared resource.\r
- xMutex = xSemaphoreCreateRecursiveMutex();\r
- }\r
-\r
- // A task that uses the mutex.\r
- void vAnotherTask( void * pvParameters )\r
- {\r
- // ... Do other things.\r
-\r
- if( xMutex != NULL )\r
- {\r
- // See if we can obtain the mutex. If the mutex is not available\r
- // wait 10 ticks to see if it becomes free. \r
- if( xSemaphoreTakeRecursive( xSemaphore, ( portTickType ) 10 ) == pdTRUE )\r
- {\r
- // We were able to obtain the mutex and can now access the\r
- // shared resource.\r
-\r
- // ...\r
- // For some reason due to the nature of the code further calls to \r
- // xSemaphoreTakeRecursive() are made on the same mutex. In real\r
- // code these would not be just sequential calls as this would make\r
- // no sense. Instead the calls are likely to be buried inside\r
- // a more complex call structure.\r
- xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );\r
- xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );\r
-\r
- // The mutex has now been 'taken' three times, so will not be \r
- // available to another task until it has also been given back\r
- // three times. Again it is unlikely that real code would have\r
- // these calls sequentially, but instead buried in a more complex\r
- // call structure. This is just for illustrative purposes.\r
- xSemaphoreGiveRecursive( xMutex );\r
- xSemaphoreGiveRecursive( xMutex );\r
- xSemaphoreGiveRecursive( xMutex );\r
-\r
- // Now the mutex can be taken by other tasks.\r
- }\r
- else\r
- {\r
- // We could not obtain the mutex and can therefore not access\r
- // the shared resource safely.\r
- }\r
- }\r
- }\r
- </pre>\r
- * \defgroup xSemaphoreTakeRecursive xSemaphoreTakeRecursive\r
- * \ingroup Semaphores\r
- */\r
-#define xSemaphoreTakeRecursive( xMutex, xBlockTime ) xQueueTakeMutexRecursive( ( xMutex ), ( xBlockTime ) )\r
-\r
-\r
-/* \r
- * xSemaphoreAltTake() is an alternative version of xSemaphoreTake().\r
- *\r
- * The source code that implements the alternative (Alt) API is much \r
- * simpler because it executes everything from within a critical section. \r
- * This is the approach taken by many other RTOSes, but FreeRTOS.org has the \r
- * preferred fully featured API too. The fully featured API has more \r
- * complex code that takes longer to execute, but makes much less use of \r
- * critical sections. Therefore the alternative API sacrifices interrupt \r
- * responsiveness to gain execution speed, whereas the fully featured API\r
- * sacrifices execution speed to ensure better interrupt responsiveness.\r
- */\r
-#define xSemaphoreAltTake( xSemaphore, xBlockTime ) xQueueAltGenericReceive( ( xQueueHandle ) ( xSemaphore ), NULL, ( xBlockTime ), pdFALSE )\r
-\r
-/**\r
- * semphr. h\r
- * <pre>xSemaphoreGive( xSemaphoreHandle xSemaphore )</pre>\r
- *\r
- * <i>Macro</i> to release a semaphore. The semaphore must have previously been\r
- * created with a call to vSemaphoreCreateBinary(), xSemaphoreCreateMutex() or\r
- * xSemaphoreCreateCounting(). and obtained using sSemaphoreTake().\r
- *\r
- * This macro must not be used from an ISR. See xSemaphoreGiveFromISR () for\r
- * an alternative which can be used from an ISR.\r
- *\r
- * This macro must also not be used on semaphores created using \r
- * xSemaphoreCreateRecursiveMutex().\r
- *\r
- * @param xSemaphore A handle to the semaphore being released. This is the\r
- * handle returned when the semaphore was created.\r
- *\r
- * @return pdTRUE if the semaphore was released. pdFALSE if an error occurred.\r
- * Semaphores are implemented using queues. An error can occur if there is\r
- * no space on the queue to post a message - indicating that the \r
- * semaphore was not first obtained correctly.\r
- *\r
- * Example usage:\r
- <pre>\r
- xSemaphoreHandle xSemaphore = NULL;\r
-\r
- void vATask( void * pvParameters )\r
- {\r
- // Create the semaphore to guard a shared resource.\r
- vSemaphoreCreateBinary( xSemaphore );\r
-\r
- if( xSemaphore != NULL )\r
- {\r
- if( xSemaphoreGive( xSemaphore ) != pdTRUE )\r
- {\r
- // We would expect this call to fail because we cannot give\r
- // a semaphore without first "taking" it!\r
- }\r
-\r
- // Obtain the semaphore - don't block if the semaphore is not\r
- // immediately available.\r
- if( xSemaphoreTake( xSemaphore, ( portTickType ) 0 ) )\r
- {\r
- // We now have the semaphore and can access the shared resource.\r
-\r
- // ...\r
-\r
- // We have finished accessing the shared resource so can free the\r
- // semaphore.\r
- if( xSemaphoreGive( xSemaphore ) != pdTRUE )\r
- {\r
- // We would not expect this call to fail because we must have\r
- // obtained the semaphore to get here.\r
- }\r
- }\r
- }\r
- }\r
- </pre>\r
- * \defgroup xSemaphoreGive xSemaphoreGive\r
- * \ingroup Semaphores\r
- */\r
-#define xSemaphoreGive( xSemaphore ) xQueueGenericSend( ( xQueueHandle ) ( xSemaphore ), NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK )\r
-\r
-/**\r
- * semphr. h\r
- * <pre>xSemaphoreGiveRecursive( xSemaphoreHandle xMutex )</pre>\r
- *\r
- * <i>Macro</i> to recursively release, or 'give', a mutex type semaphore.\r
- * The mutex must have previously been created using a call to \r
- * xSemaphoreCreateRecursiveMutex();\r
- * \r
- * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this\r
- * macro to be available.\r
- *\r
- * This macro must not be used on mutexes created using xSemaphoreCreateMutex().\r
- * \r
- * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex \r
- * doesn't become available again until the owner has called \r
- * xSemaphoreGiveRecursive() for each successful 'take' request. For example, \r
- * if a task successfully 'takes' the same mutex 5 times then the mutex will \r
- * not be available to any other task until it has also 'given' the mutex back\r
- * exactly five times.\r
- *\r
- * @param xMutex A handle to the mutex being released, or 'given'. This is the\r
- * handle returned by xSemaphoreCreateMutex();\r
- *\r
- * @return pdTRUE if the semaphore was given.\r
- *\r
- * Example usage:\r
- <pre>\r
- xSemaphoreHandle xMutex = NULL;\r
-\r
- // A task that creates a mutex.\r
- void vATask( void * pvParameters )\r
- {\r
- // Create the mutex to guard a shared resource.\r
- xMutex = xSemaphoreCreateRecursiveMutex();\r
- }\r
-\r
- // A task that uses the mutex.\r
- void vAnotherTask( void * pvParameters )\r
- {\r
- // ... Do other things.\r
-\r
- if( xMutex != NULL )\r
- {\r
- // See if we can obtain the mutex. If the mutex is not available\r
- // wait 10 ticks to see if it becomes free. \r
- if( xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 ) == pdTRUE )\r
- {\r
- // We were able to obtain the mutex and can now access the\r
- // shared resource.\r
-\r
- // ...\r
- // For some reason due to the nature of the code further calls to \r
- // xSemaphoreTakeRecursive() are made on the same mutex. In real\r
- // code these would not be just sequential calls as this would make\r
- // no sense. Instead the calls are likely to be buried inside\r
- // a more complex call structure.\r
- xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );\r
- xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );\r
-\r
- // The mutex has now been 'taken' three times, so will not be \r
- // available to another task until it has also been given back\r
- // three times. Again it is unlikely that real code would have\r
- // these calls sequentially, it would be more likely that the calls\r
- // to xSemaphoreGiveRecursive() would be called as a call stack\r
- // unwound. This is just for demonstrative purposes.\r
- xSemaphoreGiveRecursive( xMutex );\r
- xSemaphoreGiveRecursive( xMutex );\r
- xSemaphoreGiveRecursive( xMutex );\r
-\r
- // Now the mutex can be taken by other tasks.\r
- }\r
- else\r
- {\r
- // We could not obtain the mutex and can therefore not access\r
- // the shared resource safely.\r
- }\r
- }\r
- }\r
- </pre>\r
- * \defgroup xSemaphoreGiveRecursive xSemaphoreGiveRecursive\r
- * \ingroup Semaphores\r
- */\r
-#define xSemaphoreGiveRecursive( xMutex ) xQueueGiveMutexRecursive( ( xMutex ) )\r
-\r
-/* \r
- * xSemaphoreAltGive() is an alternative version of xSemaphoreGive().\r
- *\r
- * The source code that implements the alternative (Alt) API is much \r
- * simpler because it executes everything from within a critical section. \r
- * This is the approach taken by many other RTOSes, but FreeRTOS.org has the \r
- * preferred fully featured API too. The fully featured API has more \r
- * complex code that takes longer to execute, but makes much less use of \r
- * critical sections. Therefore the alternative API sacrifices interrupt \r
- * responsiveness to gain execution speed, whereas the fully featured API\r
- * sacrifices execution speed to ensure better interrupt responsiveness.\r
- */\r
-#define xSemaphoreAltGive( xSemaphore ) xQueueAltGenericSend( ( xQueueHandle ) ( xSemaphore ), NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK )\r
-\r
-/**\r
- * semphr. h\r
- * <pre>\r
- xSemaphoreGiveFromISR( \r
- xSemaphoreHandle xSemaphore, \r
- signed portBASE_TYPE *pxHigherPriorityTaskWoken\r
- )</pre>\r
- *\r
- * <i>Macro</i> to release a semaphore. The semaphore must have previously been\r
- * created with a call to vSemaphoreCreateBinary() or xSemaphoreCreateCounting().\r
- *\r
- * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())\r
- * must not be used with this macro.\r
- *\r
- * This macro can be used from an ISR.\r
- *\r
- * @param xSemaphore A handle to the semaphore being released. This is the\r
- * handle returned when the semaphore was created.\r
- *\r
- * @param pxHigherPriorityTaskWoken xSemaphoreGiveFromISR() will set\r
- * *pxHigherPriorityTaskWoken to pdTRUE if giving the semaphore caused a task\r
- * to unblock, and the unblocked task has a priority higher than the currently\r
- * running task. If xSemaphoreGiveFromISR() sets this value to pdTRUE then\r
- * a context switch should be requested before the interrupt is exited.\r
- *\r
- * @return pdTRUE if the semaphore was successfully given, otherwise errQUEUE_FULL.\r
- *\r
- * Example usage:\r
- <pre>\r
- \#define LONG_TIME 0xffff\r
- \#define TICKS_TO_WAIT 10\r
- xSemaphoreHandle xSemaphore = NULL;\r
-\r
- // Repetitive task.\r
- void vATask( void * pvParameters )\r
- {\r
- for( ;; )\r
- {\r
- // We want this task to run every 10 ticks of a timer. The semaphore \r
- // was created before this task was started.\r
-\r
- // Block waiting for the semaphore to become available.\r
- if( xSemaphoreTake( xSemaphore, LONG_TIME ) == pdTRUE )\r
- {\r
- // It is time to execute.\r
-\r
- // ...\r
-\r
- // We have finished our task. Return to the top of the loop where\r
- // we will block on the semaphore until it is time to execute \r
- // again. Note when using the semaphore for synchronisation with an\r
- // ISR in this manner there is no need to 'give' the semaphore back.\r
- }\r
- }\r
- }\r
-\r
- // Timer ISR\r
- void vTimerISR( void * pvParameters )\r
- {\r
- static unsigned char ucLocalTickCount = 0;\r
- static signed portBASE_TYPE xHigherPriorityTaskWoken;\r
-\r
- // A timer tick has occurred.\r
-\r
- // ... Do other time functions.\r
-\r
- // Is it time for vATask () to run?\r
- xHigherPriorityTaskWoken = pdFALSE;\r
- ucLocalTickCount++;\r
- if( ucLocalTickCount >= TICKS_TO_WAIT )\r
- {\r
- // Unblock the task by releasing the semaphore.\r
- xSemaphoreGiveFromISR( xSemaphore, &xHigherPriorityTaskWoken );\r
-\r
- // Reset the count so we release the semaphore again in 10 ticks time.\r
- ucLocalTickCount = 0;\r
- }\r
-\r
- if( xHigherPriorityTaskWoken != pdFALSE )\r
- {\r
- // We can force a context switch here. Context switching from an\r
- // ISR uses port specific syntax. Check the demo task for your port\r
- // to find the syntax required.\r
- }\r
- }\r
- </pre>\r
- * \defgroup xSemaphoreGiveFromISR xSemaphoreGiveFromISR\r
- * \ingroup Semaphores\r
- */\r
-#define xSemaphoreGiveFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueueHandle ) ( xSemaphore ), NULL, ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )\r
-\r
-/**\r
- * semphr. h\r
- * <pre>\r
- xSemaphoreTakeFromISR( \r
- xSemaphoreHandle xSemaphore, \r
- signed portBASE_TYPE *pxHigherPriorityTaskWoken\r
- )</pre>\r
- *\r
- * <i>Macro</i> to take a semaphore from an ISR. The semaphore must have \r
- * previously been created with a call to vSemaphoreCreateBinary() or \r
- * xSemaphoreCreateCounting().\r
- *\r
- * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())\r
- * must not be used with this macro.\r
- *\r
- * This macro can be used from an ISR, however taking a semaphore from an ISR\r
- * is not a common operation. It is likely to only be useful when taking a\r
- * counting semaphore when an interrupt is obtaining an object from a resource\r
- * pool (when the semaphore count indicates the number of resources available).\r
- *\r
- * @param xSemaphore A handle to the semaphore being taken. This is the\r
- * handle returned when the semaphore was created.\r
- *\r
- * @param pxHigherPriorityTaskWoken xSemaphoreTakeFromISR() will set\r
- * *pxHigherPriorityTaskWoken to pdTRUE if taking the semaphore caused a task\r
- * to unblock, and the unblocked task has a priority higher than the currently\r
- * running task. If xSemaphoreTakeFromISR() sets this value to pdTRUE then\r
- * a context switch should be requested before the interrupt is exited.\r
- *\r
- * @return pdTRUE if the semaphore was successfully taken, otherwise \r
- * pdFALSE\r
- */\r
-#define xSemaphoreTakeFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueReceiveFromISR( ( xQueueHandle ) ( xSemaphore ), NULL, ( pxHigherPriorityTaskWoken ) )\r
-\r
-/**\r
- * semphr. h\r
- * <pre>xSemaphoreHandle xSemaphoreCreateMutex( void )</pre>\r
- *\r
- * <i>Macro</i> that implements a mutex semaphore by using the existing queue \r
- * mechanism.\r
- *\r
- * Mutexes created using this macro can be accessed using the xSemaphoreTake()\r
- * and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and \r
- * xSemaphoreGiveRecursive() macros should not be used.\r
- * \r
- * This type of semaphore uses a priority inheritance mechanism so a task \r
- * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the \r
- * semaphore it is no longer required. \r
- *\r
- * Mutex type semaphores cannot be used from within interrupt service routines. \r
- *\r
- * See vSemaphoreCreateBinary() for an alternative implementation that can be \r
- * used for pure synchronisation (where one task or interrupt always 'gives' the \r
- * semaphore and another always 'takes' the semaphore) and from within interrupt \r
- * service routines.\r
- *\r
- * @return xSemaphore Handle to the created mutex semaphore. Should be of type \r
- * xSemaphoreHandle.\r
- *\r
- * Example usage:\r
- <pre>\r
- xSemaphoreHandle xSemaphore;\r
-\r
- void vATask( void * pvParameters )\r
- {\r
- // Semaphore cannot be used before a call to xSemaphoreCreateMutex().\r
- // This is a macro so pass the variable in directly.\r
- xSemaphore = xSemaphoreCreateMutex();\r
-\r
- if( xSemaphore != NULL )\r
- {\r
- // The semaphore was created successfully.\r
- // The semaphore can now be used. \r
- }\r
- }\r
- </pre>\r
- * \defgroup vSemaphoreCreateMutex vSemaphoreCreateMutex\r
- * \ingroup Semaphores\r
- */\r
-#define xSemaphoreCreateMutex() xQueueCreateMutex( queueQUEUE_TYPE_MUTEX )\r
-\r
-\r
-/**\r
- * semphr. h\r
- * <pre>xSemaphoreHandle xSemaphoreCreateRecursiveMutex( void )</pre>\r
- *\r
- * <i>Macro</i> that implements a recursive mutex by using the existing queue \r
- * mechanism.\r
- *\r
- * Mutexes created using this macro can be accessed using the \r
- * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The \r
- * xSemaphoreTake() and xSemaphoreGive() macros should not be used.\r
- *\r
- * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex \r
- * doesn't become available again until the owner has called \r
- * xSemaphoreGiveRecursive() for each successful 'take' request. For example, \r
- * if a task successfully 'takes' the same mutex 5 times then the mutex will \r
- * not be available to any other task until it has also 'given' the mutex back\r
- * exactly five times.\r
- * \r
- * This type of semaphore uses a priority inheritance mechanism so a task \r
- * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the \r
- * semaphore it is no longer required. \r
- *\r
- * Mutex type semaphores cannot be used from within interrupt service routines. \r
- *\r
- * See vSemaphoreCreateBinary() for an alternative implementation that can be \r
- * used for pure synchronisation (where one task or interrupt always 'gives' the \r
- * semaphore and another always 'takes' the semaphore) and from within interrupt \r
- * service routines.\r
- *\r
- * @return xSemaphore Handle to the created mutex semaphore. Should be of type \r
- * xSemaphoreHandle.\r
- *\r
- * Example usage:\r
- <pre>\r
- xSemaphoreHandle xSemaphore;\r
-\r
- void vATask( void * pvParameters )\r
- {\r
- // Semaphore cannot be used before a call to xSemaphoreCreateMutex().\r
- // This is a macro so pass the variable in directly.\r
- xSemaphore = xSemaphoreCreateRecursiveMutex();\r
-\r
- if( xSemaphore != NULL )\r
- {\r
- // The semaphore was created successfully.\r
- // The semaphore can now be used. \r
- }\r
- }\r
- </pre>\r
- * \defgroup vSemaphoreCreateMutex vSemaphoreCreateMutex\r
- * \ingroup Semaphores\r
- */\r
-#define xSemaphoreCreateRecursiveMutex() xQueueCreateMutex( queueQUEUE_TYPE_RECURSIVE_MUTEX )\r
-\r
-/**\r
- * semphr. h\r
- * <pre>xSemaphoreHandle xSemaphoreCreateCounting( unsigned portBASE_TYPE uxMaxCount, unsigned portBASE_TYPE uxInitialCount )</pre>\r
- *\r
- * <i>Macro</i> that creates a counting semaphore by using the existing \r
- * queue mechanism. \r
- *\r
- * Counting semaphores are typically used for two things:\r
- *\r
- * 1) Counting events. \r
- *\r
- * In this usage scenario an event handler will 'give' a semaphore each time\r
- * an event occurs (incrementing the semaphore count value), and a handler \r
- * task will 'take' a semaphore each time it processes an event \r
- * (decrementing the semaphore count value). The count value is therefore \r
- * the difference between the number of events that have occurred and the \r
- * number that have been processed. In this case it is desirable for the \r
- * initial count value to be zero.\r
- *\r
- * 2) Resource management.\r
- *\r
- * In this usage scenario the count value indicates the number of resources\r
- * available. To obtain control of a resource a task must first obtain a \r
- * semaphore - decrementing the semaphore count value. When the count value\r
- * reaches zero there are no free resources. When a task finishes with the\r
- * resource it 'gives' the semaphore back - incrementing the semaphore count\r
- * value. In this case it is desirable for the initial count value to be\r
- * equal to the maximum count value, indicating that all resources are free.\r
- *\r
- * @param uxMaxCount The maximum count value that can be reached. When the \r
- * semaphore reaches this value it can no longer be 'given'.\r
- *\r
- * @param uxInitialCount The count value assigned to the semaphore when it is\r
- * created.\r
- *\r
- * @return Handle to the created semaphore. Null if the semaphore could not be\r
- * created.\r
- * \r
- * Example usage:\r
- <pre>\r
- xSemaphoreHandle xSemaphore;\r
-\r
- void vATask( void * pvParameters )\r
- {\r
- xSemaphoreHandle xSemaphore = NULL;\r
-\r
- // Semaphore cannot be used before a call to xSemaphoreCreateCounting().\r
- // The max value to which the semaphore can count should be 10, and the\r
- // initial value assigned to the count should be 0.\r
- xSemaphore = xSemaphoreCreateCounting( 10, 0 );\r
-\r
- if( xSemaphore != NULL )\r
- {\r
- // The semaphore was created successfully.\r
- // The semaphore can now be used. \r
- }\r
- }\r
- </pre>\r
- * \defgroup xSemaphoreCreateCounting xSemaphoreCreateCounting\r
- * \ingroup Semaphores\r
- */\r
-#define xSemaphoreCreateCounting( uxMaxCount, uxInitialCount ) xQueueCreateCountingSemaphore( ( uxMaxCount ), ( uxInitialCount ) )\r
-\r
-/**\r
- * semphr. h\r
- * <pre>void vSemaphoreDelete( xSemaphoreHandle xSemaphore );</pre>\r
- *\r
- * Delete a semaphore. This function must be used with care. For example,\r
- * do not delete a mutex type semaphore if the mutex is held by a task.\r
- *\r
- * @param xSemaphore A handle to the semaphore to be deleted.\r
- *\r
- * \page vSemaphoreDelete vSemaphoreDelete\r
- * \ingroup Semaphores\r
- */\r
-#define vSemaphoreDelete( xSemaphore ) vQueueDelete( ( xQueueHandle ) ( xSemaphore ) )\r
-\r
-/**\r
- * semphr.h\r
- * <pre>xTaskHandle xSemaphoreGetMutexHolder( xSemaphoreHandle xMutex );</pre>\r
- *\r
- * If xMutex is indeed a mutex type semaphore, return the current mutex holder.\r
- * If xMutex is not a mutex type semaphore, or the mutex is available (not held\r
- * by a task), return NULL.\r
- *\r
- * Note: This Is is a good way of determining if the calling task is the mutex \r
- * holder, but not a good way of determining the identity of the mutex holder as\r
- * the holder may change between the function exiting and the returned value\r
- * being tested.\r
- */\r
-#define xSemaphoreGetMutexHolder( xSemaphore ) xQueueGetMutexHolder( ( xSemaphore ) )\r
-\r
-#endif /* SEMAPHORE_H */\r
-\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
-\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - Selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-\r
-#ifndef TASK_H\r
-#define TASK_H\r
-\r
-#ifndef INC_FREERTOS_H\r
- #error "include FreeRTOS.h must appear in source files before include task.h"\r
-#endif\r
-\r
-#include "portable.h"\r
-#include "list.h"\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-/*-----------------------------------------------------------\r
- * MACROS AND DEFINITIONS\r
- *----------------------------------------------------------*/\r
-\r
-#define tskKERNEL_VERSION_NUMBER "V7.1.1"\r
-\r
-/**\r
- * task. h\r
- *\r
- * Type by which tasks are referenced. For example, a call to xTaskCreate\r
- * returns (via a pointer parameter) an xTaskHandle variable that can then\r
- * be used as a parameter to vTaskDelete to delete the task.\r
- *\r
- * \page xTaskHandle xTaskHandle\r
- * \ingroup Tasks\r
- */\r
-typedef void * xTaskHandle;\r
-\r
-/*\r
- * Used internally only.\r
- */\r
-typedef struct xTIME_OUT\r
-{\r
- portBASE_TYPE xOverflowCount;\r
- portTickType xTimeOnEntering;\r
-} xTimeOutType;\r
-\r
-/*\r
- * Defines the memory ranges allocated to the task when an MPU is used.\r
- */\r
-typedef struct xMEMORY_REGION\r
-{\r
- void *pvBaseAddress;\r
- unsigned long ulLengthInBytes;\r
- unsigned long ulParameters;\r
-} xMemoryRegion;\r
-\r
-/*\r
- * Parameters required to create an MPU protected task.\r
- */\r
-typedef struct xTASK_PARAMTERS\r
-{\r
- pdTASK_CODE pvTaskCode;\r
- const signed char * const pcName;\r
- unsigned short usStackDepth;\r
- void *pvParameters;\r
- unsigned portBASE_TYPE uxPriority;\r
- portSTACK_TYPE *puxStackBuffer;\r
- xMemoryRegion xRegions[ portNUM_CONFIGURABLE_REGIONS ];\r
-} xTaskParameters;\r
-\r
-/*\r
- * Defines the priority used by the idle task. This must not be modified.\r
- *\r
- * \ingroup TaskUtils\r
- */\r
-#define tskIDLE_PRIORITY ( ( unsigned portBASE_TYPE ) 0U )\r
-\r
-/**\r
- * task. h\r
- *\r
- * Macro for forcing a context switch.\r
- *\r
- * \page taskYIELD taskYIELD\r
- * \ingroup SchedulerControl\r
- */\r
-#define taskYIELD() portYIELD()\r
-\r
-/**\r
- * task. h\r
- *\r
- * Macro to mark the start of a critical code region. Preemptive context\r
- * switches cannot occur when in a critical region.\r
- *\r
- * NOTE: This may alter the stack (depending on the portable implementation)\r
- * so must be used with care!\r
- *\r
- * \page taskENTER_CRITICAL taskENTER_CRITICAL\r
- * \ingroup SchedulerControl\r
- */\r
-#define taskENTER_CRITICAL() portENTER_CRITICAL()\r
-\r
-/**\r
- * task. h\r
- *\r
- * Macro to mark the end of a critical code region. Preemptive context\r
- * switches cannot occur when in a critical region.\r
- *\r
- * NOTE: This may alter the stack (depending on the portable implementation)\r
- * so must be used with care!\r
- *\r
- * \page taskEXIT_CRITICAL taskEXIT_CRITICAL\r
- * \ingroup SchedulerControl\r
- */\r
-#define taskEXIT_CRITICAL() portEXIT_CRITICAL()\r
-\r
-/**\r
- * task. h\r
- *\r
- * Macro to disable all maskable interrupts.\r
- *\r
- * \page taskDISABLE_INTERRUPTS taskDISABLE_INTERRUPTS\r
- * \ingroup SchedulerControl\r
- */\r
-#define taskDISABLE_INTERRUPTS() portDISABLE_INTERRUPTS()\r
-\r
-/**\r
- * task. h\r
- *\r
- * Macro to enable microcontroller interrupts.\r
- *\r
- * \page taskENABLE_INTERRUPTS taskENABLE_INTERRUPTS\r
- * \ingroup SchedulerControl\r
- */\r
-#define taskENABLE_INTERRUPTS() portENABLE_INTERRUPTS()\r
-\r
-/* Definitions returned by xTaskGetSchedulerState(). */\r
-#define taskSCHEDULER_NOT_STARTED 0\r
-#define taskSCHEDULER_RUNNING 1\r
-#define taskSCHEDULER_SUSPENDED 2\r
-\r
-/*-----------------------------------------------------------\r
- * TASK CREATION API\r
- *----------------------------------------------------------*/\r
-\r
-/**\r
- * task. h\r
- *<pre>\r
- portBASE_TYPE xTaskCreate(\r
- pdTASK_CODE pvTaskCode,\r
- const char * const pcName,\r
- unsigned short usStackDepth,\r
- void *pvParameters,\r
- unsigned portBASE_TYPE uxPriority,\r
- xTaskHandle *pvCreatedTask\r
- );</pre>\r
- *\r
- * Create a new task and add it to the list of tasks that are ready to run.\r
- *\r
- * xTaskCreate() can only be used to create a task that has unrestricted\r
- * access to the entire microcontroller memory map. Systems that include MPU\r
- * support can alternatively create an MPU constrained task using\r
- * xTaskCreateRestricted().\r
- *\r
- * @param pvTaskCode Pointer to the task entry function. Tasks\r
- * must be implemented to never return (i.e. continuous loop).\r
- *\r
- * @param pcName A descriptive name for the task. This is mainly used to\r
- * facilitate debugging. Max length defined by tskMAX_TASK_NAME_LEN - default\r
- * is 16.\r
- *\r
- * @param usStackDepth The size of the task stack specified as the number of\r
- * variables the stack can hold - not the number of bytes. For example, if\r
- * the stack is 16 bits wide and usStackDepth is defined as 100, 200 bytes\r
- * will be allocated for stack storage.\r
- *\r
- * @param pvParameters Pointer that will be used as the parameter for the task\r
- * being created.\r
- *\r
- * @param uxPriority The priority at which the task should run. Systems that\r
- * include MPU support can optionally create tasks in a privileged (system)\r
- * mode by setting bit portPRIVILEGE_BIT of the priority parameter. For\r
- * example, to create a privileged task at priority 2 the uxPriority parameter\r
- * should be set to ( 2 | portPRIVILEGE_BIT ).\r
- *\r
- * @param pvCreatedTask Used to pass back a handle by which the created task\r
- * can be referenced.\r
- *\r
- * @return pdPASS if the task was successfully created and added to a ready\r
- * list, otherwise an error code defined in the file errors. h\r
- *\r
- * Example usage:\r
- <pre>\r
- // Task to be created.\r
- void vTaskCode( void * pvParameters )\r
- {\r
- for( ;; )\r
- {\r
- // Task code goes here.\r
- }\r
- }\r
-\r
- // Function that creates a task.\r
- void vOtherFunction( void )\r
- {\r
- static unsigned char ucParameterToPass;\r
- xTaskHandle xHandle;\r
-\r
- // Create the task, storing the handle. Note that the passed parameter ucParameterToPass\r
- // must exist for the lifetime of the task, so in this case is declared static. If it was just an\r
- // an automatic stack variable it might no longer exist, or at least have been corrupted, by the time\r
- // the new task attempts to access it.\r
- xTaskCreate( vTaskCode, "NAME", STACK_SIZE, &ucParameterToPass, tskIDLE_PRIORITY, &xHandle );\r
-\r
- // Use the handle to delete the task.\r
- vTaskDelete( xHandle );\r
- }\r
- </pre>\r
- * \defgroup xTaskCreate xTaskCreate\r
- * \ingroup Tasks\r
- */\r
-#define xTaskCreate( pvTaskCode, pcName, usStackDepth, pvParameters, uxPriority, pxCreatedTask ) xTaskGenericCreate( ( pvTaskCode ), ( pcName ), ( usStackDepth ), ( pvParameters ), ( uxPriority ), ( pxCreatedTask ), ( NULL ), ( NULL ) )\r
-\r
-/**\r
- * task. h\r
- *<pre>\r
- portBASE_TYPE xTaskCreateRestricted( xTaskParameters *pxTaskDefinition, xTaskHandle *pxCreatedTask );</pre>\r
- *\r
- * xTaskCreateRestricted() should only be used in systems that include an MPU\r
- * implementation.\r
- *\r
- * Create a new task and add it to the list of tasks that are ready to run.\r
- * The function parameters define the memory regions and associated access\r
- * permissions allocated to the task.\r
- *\r
- * @param pxTaskDefinition Pointer to a structure that contains a member\r
- * for each of the normal xTaskCreate() parameters (see the xTaskCreate() API\r
- * documentation) plus an optional stack buffer and the memory region\r
- * definitions.\r
- *\r
- * @param pxCreatedTask Used to pass back a handle by which the created task\r
- * can be referenced.\r
- *\r
- * @return pdPASS if the task was successfully created and added to a ready\r
- * list, otherwise an error code defined in the file errors. h\r
- *\r
- * Example usage:\r
- <pre>\r
-// Create an xTaskParameters structure that defines the task to be created.\r
-static const xTaskParameters xCheckTaskParameters =\r
-{\r
- vATask, // pvTaskCode - the function that implements the task.\r
- "ATask", // pcName - just a text name for the task to assist debugging.\r
- 100, // usStackDepth - the stack size DEFINED IN WORDS.\r
- NULL, // pvParameters - passed into the task function as the function parameters.\r
- ( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.\r
- cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.\r
-\r
- // xRegions - Allocate up to three separate memory regions for access by\r
- // the task, with appropriate access permissions. Different processors have\r
- // different memory alignment requirements - refer to the FreeRTOS documentation\r
- // for full information.\r
- { \r
- // Base address Length Parameters\r
- { cReadWriteArray, 32, portMPU_REGION_READ_WRITE },\r
- { cReadOnlyArray, 32, portMPU_REGION_READ_ONLY },\r
- { cPrivilegedOnlyAccessArray, 128, portMPU_REGION_PRIVILEGED_READ_WRITE }\r
- }\r
-};\r
-\r
-int main( void )\r
-{\r
-xTaskHandle xHandle;\r
-\r
- // Create a task from the const structure defined above. The task handle\r
- // is requested (the second parameter is not NULL) but in this case just for\r
- // demonstration purposes as its not actually used.\r
- xTaskCreateRestricted( &xRegTest1Parameters, &xHandle );\r
-\r
- // Start the scheduler.\r
- vTaskStartScheduler();\r
-\r
- // Will only get here if there was insufficient memory to create the idle\r
- // task.\r
- for( ;; );\r
-}\r
- </pre>\r
- * \defgroup xTaskCreateRestricted xTaskCreateRestricted\r
- * \ingroup Tasks\r
- */\r
-#define xTaskCreateRestricted( x, pxCreatedTask ) xTaskGenericCreate( ((x)->pvTaskCode), ((x)->pcName), ((x)->usStackDepth), ((x)->pvParameters), ((x)->uxPriority), (pxCreatedTask), ((x)->puxStackBuffer), ((x)->xRegions) )\r
-\r
-/**\r
- * task. h\r
- *<pre>\r
- void vTaskAllocateMPURegions( xTaskHandle xTask, const xMemoryRegion * const pxRegions );</pre>\r
- *\r
- * Memory regions are assigned to a restricted task when the task is created by\r
- * a call to xTaskCreateRestricted(). These regions can be redefined using\r
- * vTaskAllocateMPURegions().\r
- *\r
- * @param xTask The handle of the task being updated.\r
- *\r
- * @param xRegions A pointer to an xMemoryRegion structure that contains the\r
- * new memory region definitions.\r
- *\r
- * Example usage:\r
- <pre>\r
-// Define an array of xMemoryRegion structures that configures an MPU region\r
-// allowing read/write access for 1024 bytes starting at the beginning of the\r
-// ucOneKByte array. The other two of the maximum 3 definable regions are\r
-// unused so set to zero.\r
-static const xMemoryRegion xAltRegions[ portNUM_CONFIGURABLE_REGIONS ] =\r
-{ \r
- // Base address Length Parameters\r
- { ucOneKByte, 1024, portMPU_REGION_READ_WRITE },\r
- { 0, 0, 0 },\r
- { 0, 0, 0 }\r
-};\r
-\r
-void vATask( void *pvParameters )\r
-{\r
- // This task was created such that it has access to certain regions of\r
- // memory as defined by the MPU configuration. At some point it is\r
- // desired that these MPU regions are replaced with that defined in the\r
- // xAltRegions const struct above. Use a call to vTaskAllocateMPURegions()\r
- // for this purpose. NULL is used as the task handle to indicate that this\r
- // function should modify the MPU regions of the calling task.\r
- vTaskAllocateMPURegions( NULL, xAltRegions );\r
- \r
- // Now the task can continue its function, but from this point on can only\r
- // access its stack and the ucOneKByte array (unless any other statically\r
- // defined or shared regions have been declared elsewhere).\r
-}\r
- </pre>\r
- * \defgroup xTaskCreateRestricted xTaskCreateRestricted\r
- * \ingroup Tasks\r
- */\r
-void vTaskAllocateMPURegions( xTaskHandle xTask, const xMemoryRegion * const pxRegions ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskDelete( xTaskHandle pxTask );</pre>\r
- *\r
- * INCLUDE_vTaskDelete must be defined as 1 for this function to be available.\r
- * See the configuration section for more information.\r
- *\r
- * Remove a task from the RTOS real time kernels management. The task being\r
- * deleted will be removed from all ready, blocked, suspended and event lists.\r
- *\r
- * NOTE: The idle task is responsible for freeing the kernel allocated\r
- * memory from tasks that have been deleted. It is therefore important that\r
- * the idle task is not starved of microcontroller processing time if your\r
- * application makes any calls to vTaskDelete (). Memory allocated by the\r
- * task code is not automatically freed, and should be freed before the task\r
- * is deleted.\r
- *\r
- * See the demo application file death.c for sample code that utilises\r
- * vTaskDelete ().\r
- *\r
- * @param pxTask The handle of the task to be deleted. Passing NULL will\r
- * cause the calling task to be deleted.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vOtherFunction( void )\r
- {\r
- xTaskHandle xHandle;\r
-\r
- // Create the task, storing the handle.\r
- xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
-\r
- // Use the handle to delete the task.\r
- vTaskDelete( xHandle );\r
- }\r
- </pre>\r
- * \defgroup vTaskDelete vTaskDelete\r
- * \ingroup Tasks\r
- */\r
-void vTaskDelete( xTaskHandle pxTaskToDelete ) PRIVILEGED_FUNCTION;\r
-\r
-/*-----------------------------------------------------------\r
- * TASK CONTROL API\r
- *----------------------------------------------------------*/\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskDelay( portTickType xTicksToDelay );</pre>\r
- *\r
- * Delay a task for a given number of ticks. The actual time that the\r
- * task remains blocked depends on the tick rate. The constant\r
- * portTICK_RATE_MS can be used to calculate real time from the tick\r
- * rate - with the resolution of one tick period.\r
- *\r
- * INCLUDE_vTaskDelay must be defined as 1 for this function to be available.\r
- * See the configuration section for more information.\r
- *\r
- *\r
- * vTaskDelay() specifies a time at which the task wishes to unblock relative to\r
- * the time at which vTaskDelay() is called. For example, specifying a block\r
- * period of 100 ticks will cause the task to unblock 100 ticks after\r
- * vTaskDelay() is called. vTaskDelay() does not therefore provide a good method\r
- * of controlling the frequency of a cyclical task as the path taken through the\r
- * code, as well as other task and interrupt activity, will effect the frequency\r
- * at which vTaskDelay() gets called and therefore the time at which the task\r
- * next executes. See vTaskDelayUntil() for an alternative API function designed\r
- * to facilitate fixed frequency execution. It does this by specifying an\r
- * absolute time (rather than a relative time) at which the calling task should\r
- * unblock.\r
- *\r
- * @param xTicksToDelay The amount of time, in tick periods, that\r
- * the calling task should block.\r
- *\r
- * Example usage:\r
-\r
- void vTaskFunction( void * pvParameters )\r
- {\r
- void vTaskFunction( void * pvParameters )\r
- {\r
- // Block for 500ms.\r
- const portTickType xDelay = 500 / portTICK_RATE_MS;\r
-\r
- for( ;; )\r
- {\r
- // Simply toggle the LED every 500ms, blocking between each toggle.\r
- vToggleLED();\r
- vTaskDelay( xDelay );\r
- }\r
- }\r
-\r
- * \defgroup vTaskDelay vTaskDelay\r
- * \ingroup TaskCtrl\r
- */\r
-void vTaskDelay( portTickType xTicksToDelay ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskDelayUntil( portTickType *pxPreviousWakeTime, portTickType xTimeIncrement );</pre>\r
- *\r
- * INCLUDE_vTaskDelayUntil must be defined as 1 for this function to be available.\r
- * See the configuration section for more information.\r
- *\r
- * Delay a task until a specified time. This function can be used by cyclical\r
- * tasks to ensure a constant execution frequency.\r
- *\r
- * This function differs from vTaskDelay () in one important aspect: vTaskDelay () will\r
- * cause a task to block for the specified number of ticks from the time vTaskDelay () is\r
- * called. It is therefore difficult to use vTaskDelay () by itself to generate a fixed\r
- * execution frequency as the time between a task starting to execute and that task\r
- * calling vTaskDelay () may not be fixed [the task may take a different path though the\r
- * code between calls, or may get interrupted or preempted a different number of times\r
- * each time it executes].\r
- *\r
- * Whereas vTaskDelay () specifies a wake time relative to the time at which the function\r
- * is called, vTaskDelayUntil () specifies the absolute (exact) time at which it wishes to\r
- * unblock.\r
- *\r
- * The constant portTICK_RATE_MS can be used to calculate real time from the tick\r
- * rate - with the resolution of one tick period.\r
- *\r
- * @param pxPreviousWakeTime Pointer to a variable that holds the time at which the\r
- * task was last unblocked. The variable must be initialised with the current time\r
- * prior to its first use (see the example below). Following this the variable is\r
- * automatically updated within vTaskDelayUntil ().\r
- *\r
- * @param xTimeIncrement The cycle time period. The task will be unblocked at\r
- * time *pxPreviousWakeTime + xTimeIncrement. Calling vTaskDelayUntil with the\r
- * same xTimeIncrement parameter value will cause the task to execute with\r
- * a fixed interface period.\r
- *\r
- * Example usage:\r
- <pre>\r
- // Perform an action every 10 ticks.\r
- void vTaskFunction( void * pvParameters )\r
- {\r
- portTickType xLastWakeTime;\r
- const portTickType xFrequency = 10;\r
-\r
- // Initialise the xLastWakeTime variable with the current time.\r
- xLastWakeTime = xTaskGetTickCount ();\r
- for( ;; )\r
- {\r
- // Wait for the next cycle.\r
- vTaskDelayUntil( &xLastWakeTime, xFrequency );\r
-\r
- // Perform action here.\r
- }\r
- }\r
- </pre>\r
- * \defgroup vTaskDelayUntil vTaskDelayUntil\r
- * \ingroup TaskCtrl\r
- */\r
-void vTaskDelayUntil( portTickType * const pxPreviousWakeTime, portTickType xTimeIncrement ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask );</pre>\r
- *\r
- * INCLUDE_xTaskPriorityGet must be defined as 1 for this function to be available.\r
- * See the configuration section for more information.\r
- *\r
- * Obtain the priority of any task.\r
- *\r
- * @param pxTask Handle of the task to be queried. Passing a NULL\r
- * handle results in the priority of the calling task being returned.\r
- *\r
- * @return The priority of pxTask.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vAFunction( void )\r
- {\r
- xTaskHandle xHandle;\r
-\r
- // Create a task, storing the handle.\r
- xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
-\r
- // ...\r
-\r
- // Use the handle to obtain the priority of the created task.\r
- // It was created with tskIDLE_PRIORITY, but may have changed\r
- // it itself.\r
- if( uxTaskPriorityGet( xHandle ) != tskIDLE_PRIORITY )\r
- {\r
- // The task has changed it's priority.\r
- }\r
-\r
- // ...\r
-\r
- // Is our priority higher than the created task?\r
- if( uxTaskPriorityGet( xHandle ) < uxTaskPriorityGet( NULL ) )\r
- {\r
- // Our priority (obtained using NULL handle) is higher.\r
- }\r
- }\r
- </pre>\r
- * \defgroup uxTaskPriorityGet uxTaskPriorityGet\r
- * \ingroup TaskCtrl\r
- */\r
-unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority );</pre>\r
- *\r
- * INCLUDE_vTaskPrioritySet must be defined as 1 for this function to be available.\r
- * See the configuration section for more information.\r
- *\r
- * Set the priority of any task.\r
- *\r
- * A context switch will occur before the function returns if the priority\r
- * being set is higher than the currently executing task.\r
- *\r
- * @param pxTask Handle to the task for which the priority is being set.\r
- * Passing a NULL handle results in the priority of the calling task being set.\r
- *\r
- * @param uxNewPriority The priority to which the task will be set.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vAFunction( void )\r
- {\r
- xTaskHandle xHandle;\r
-\r
- // Create a task, storing the handle.\r
- xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
-\r
- // ...\r
-\r
- // Use the handle to raise the priority of the created task.\r
- vTaskPrioritySet( xHandle, tskIDLE_PRIORITY + 1 );\r
-\r
- // ...\r
-\r
- // Use a NULL handle to raise our priority to the same value.\r
- vTaskPrioritySet( NULL, tskIDLE_PRIORITY + 1 );\r
- }\r
- </pre>\r
- * \defgroup vTaskPrioritySet vTaskPrioritySet\r
- * \ingroup TaskCtrl\r
- */\r
-void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskSuspend( xTaskHandle pxTaskToSuspend );</pre>\r
- *\r
- * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.\r
- * See the configuration section for more information.\r
- *\r
- * Suspend any task. When suspended a task will never get any microcontroller\r
- * processing time, no matter what its priority.\r
- *\r
- * Calls to vTaskSuspend are not accumulative -\r
- * i.e. calling vTaskSuspend () twice on the same task still only requires one\r
- * call to vTaskResume () to ready the suspended task.\r
- *\r
- * @param pxTaskToSuspend Handle to the task being suspended. Passing a NULL\r
- * handle will cause the calling task to be suspended.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vAFunction( void )\r
- {\r
- xTaskHandle xHandle;\r
-\r
- // Create a task, storing the handle.\r
- xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
-\r
- // ...\r
-\r
- // Use the handle to suspend the created task.\r
- vTaskSuspend( xHandle );\r
-\r
- // ...\r
-\r
- // The created task will not run during this period, unless\r
- // another task calls vTaskResume( xHandle ).\r
-\r
- //...\r
-\r
-\r
- // Suspend ourselves.\r
- vTaskSuspend( NULL );\r
-\r
- // We cannot get here unless another task calls vTaskResume\r
- // with our handle as the parameter.\r
- }\r
- </pre>\r
- * \defgroup vTaskSuspend vTaskSuspend\r
- * \ingroup TaskCtrl\r
- */\r
-void vTaskSuspend( xTaskHandle pxTaskToSuspend ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskResume( xTaskHandle pxTaskToResume );</pre>\r
- *\r
- * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.\r
- * See the configuration section for more information.\r
- *\r
- * Resumes a suspended task.\r
- *\r
- * A task that has been suspended by one of more calls to vTaskSuspend ()\r
- * will be made available for running again by a single call to\r
- * vTaskResume ().\r
- *\r
- * @param pxTaskToResume Handle to the task being readied.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vAFunction( void )\r
- {\r
- xTaskHandle xHandle;\r
-\r
- // Create a task, storing the handle.\r
- xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
-\r
- // ...\r
-\r
- // Use the handle to suspend the created task.\r
- vTaskSuspend( xHandle );\r
-\r
- // ...\r
-\r
- // The created task will not run during this period, unless\r
- // another task calls vTaskResume( xHandle ).\r
-\r
- //...\r
-\r
-\r
- // Resume the suspended task ourselves.\r
- vTaskResume( xHandle );\r
-\r
- // The created task will once again get microcontroller processing\r
- // time in accordance with it priority within the system.\r
- }\r
- </pre>\r
- * \defgroup vTaskResume vTaskResume\r
- * \ingroup TaskCtrl\r
- */\r
-void vTaskResume( xTaskHandle pxTaskToResume ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>void xTaskResumeFromISR( xTaskHandle pxTaskToResume );</pre>\r
- *\r
- * INCLUDE_xTaskResumeFromISR must be defined as 1 for this function to be\r
- * available. See the configuration section for more information.\r
- *\r
- * An implementation of vTaskResume() that can be called from within an ISR.\r
- *\r
- * A task that has been suspended by one of more calls to vTaskSuspend ()\r
- * will be made available for running again by a single call to\r
- * xTaskResumeFromISR ().\r
- *\r
- * @param pxTaskToResume Handle to the task being readied.\r
- *\r
- * \defgroup vTaskResumeFromISR vTaskResumeFromISR\r
- * \ingroup TaskCtrl\r
- */\r
-portBASE_TYPE xTaskResumeFromISR( xTaskHandle pxTaskToResume ) PRIVILEGED_FUNCTION;\r
-\r
-/*-----------------------------------------------------------\r
- * SCHEDULER CONTROL\r
- *----------------------------------------------------------*/\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskStartScheduler( void );</pre>\r
- *\r
- * Starts the real time kernel tick processing. After calling the kernel\r
- * has control over which tasks are executed and when. This function\r
- * does not return until an executing task calls vTaskEndScheduler ().\r
- *\r
- * At least one task should be created via a call to xTaskCreate ()\r
- * before calling vTaskStartScheduler (). The idle task is created\r
- * automatically when the first application task is created.\r
- *\r
- * See the demo application file main.c for an example of creating\r
- * tasks and starting the kernel.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vAFunction( void )\r
- {\r
- // Create at least one task before starting the kernel.\r
- xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );\r
-\r
- // Start the real time kernel with preemption.\r
- vTaskStartScheduler ();\r
-\r
- // Will not get here unless a task calls vTaskEndScheduler ()\r
- }\r
- </pre>\r
- *\r
- * \defgroup vTaskStartScheduler vTaskStartScheduler\r
- * \ingroup SchedulerControl\r
- */\r
-void vTaskStartScheduler( void ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskEndScheduler( void );</pre>\r
- *\r
- * Stops the real time kernel tick. All created tasks will be automatically\r
- * deleted and multitasking (either preemptive or cooperative) will\r
- * stop. Execution then resumes from the point where vTaskStartScheduler ()\r
- * was called, as if vTaskStartScheduler () had just returned.\r
- *\r
- * See the demo application file main. c in the demo/PC directory for an\r
- * example that uses vTaskEndScheduler ().\r
- *\r
- * vTaskEndScheduler () requires an exit function to be defined within the\r
- * portable layer (see vPortEndScheduler () in port. c for the PC port). This\r
- * performs hardware specific operations such as stopping the kernel tick.\r
- *\r
- * vTaskEndScheduler () will cause all of the resources allocated by the\r
- * kernel to be freed - but will not free resources allocated by application\r
- * tasks.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vTaskCode( void * pvParameters )\r
- {\r
- for( ;; )\r
- {\r
- // Task code goes here.\r
-\r
- // At some point we want to end the real time kernel processing\r
- // so call ...\r
- vTaskEndScheduler ();\r
- }\r
- }\r
-\r
- void vAFunction( void )\r
- {\r
- // Create at least one task before starting the kernel.\r
- xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );\r
-\r
- // Start the real time kernel with preemption.\r
- vTaskStartScheduler ();\r
-\r
- // Will only get here when the vTaskCode () task has called\r
- // vTaskEndScheduler (). When we get here we are back to single task\r
- // execution.\r
- }\r
- </pre>\r
- *\r
- * \defgroup vTaskEndScheduler vTaskEndScheduler\r
- * \ingroup SchedulerControl\r
- */\r
-void vTaskEndScheduler( void ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>void vTaskSuspendAll( void );</pre>\r
- *\r
- * Suspends all real time kernel activity while keeping interrupts (including the\r
- * kernel tick) enabled.\r
- *\r
- * After calling vTaskSuspendAll () the calling task will continue to execute\r
- * without risk of being swapped out until a call to xTaskResumeAll () has been\r
- * made.\r
- *\r
- * API functions that have the potential to cause a context switch (for example,\r
- * vTaskDelayUntil(), xQueueSend(), etc.) must not be called while the scheduler\r
- * is suspended.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vTask1( void * pvParameters )\r
- {\r
- for( ;; )\r
- {\r
- // Task code goes here.\r
-\r
- // ...\r
-\r
- // At some point the task wants to perform a long operation during\r
- // which it does not want to get swapped out. It cannot use\r
- // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the\r
- // operation may cause interrupts to be missed - including the\r
- // ticks.\r
-\r
- // Prevent the real time kernel swapping out the task.\r
- vTaskSuspendAll ();\r
-\r
- // Perform the operation here. There is no need to use critical\r
- // sections as we have all the microcontroller processing time.\r
- // During this time interrupts will still operate and the kernel\r
- // tick count will be maintained.\r
-\r
- // ...\r
-\r
- // The operation is complete. Restart the kernel.\r
- xTaskResumeAll ();\r
- }\r
- }\r
- </pre>\r
- * \defgroup vTaskSuspendAll vTaskSuspendAll\r
- * \ingroup SchedulerControl\r
- */\r
-void vTaskSuspendAll( void ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>char xTaskResumeAll( void );</pre>\r
- *\r
- * Resumes real time kernel activity following a call to vTaskSuspendAll ().\r
- * After a call to vTaskSuspendAll () the kernel will take control of which\r
- * task is executing at any time.\r
- *\r
- * @return If resuming the scheduler caused a context switch then pdTRUE is\r
- * returned, otherwise pdFALSE is returned.\r
- *\r
- * Example usage:\r
- <pre>\r
- void vTask1( void * pvParameters )\r
- {\r
- for( ;; )\r
- {\r
- // Task code goes here.\r
-\r
- // ...\r
-\r
- // At some point the task wants to perform a long operation during\r
- // which it does not want to get swapped out. It cannot use\r
- // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the\r
- // operation may cause interrupts to be missed - including the\r
- // ticks.\r
-\r
- // Prevent the real time kernel swapping out the task.\r
- vTaskSuspendAll ();\r
-\r
- // Perform the operation here. There is no need to use critical\r
- // sections as we have all the microcontroller processing time.\r
- // During this time interrupts will still operate and the real\r
- // time kernel tick count will be maintained.\r
-\r
- // ...\r
-\r
- // The operation is complete. Restart the kernel. We want to force\r
- // a context switch - but there is no point if resuming the scheduler\r
- // caused a context switch already.\r
- if( !xTaskResumeAll () )\r
- {\r
- taskYIELD ();\r
- }\r
- }\r
- }\r
- </pre>\r
- * \defgroup xTaskResumeAll xTaskResumeAll\r
- * \ingroup SchedulerControl\r
- */\r
-signed portBASE_TYPE xTaskResumeAll( void ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <pre>signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask );</pre>\r
- *\r
- * Utility task that simply returns pdTRUE if the task referenced by xTask is\r
- * currently in the Suspended state, or pdFALSE if the task referenced by xTask\r
- * is in any other state.\r
- *\r
- */\r
-signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask ) PRIVILEGED_FUNCTION;\r
-\r
-/*-----------------------------------------------------------\r
- * TASK UTILITIES\r
- *----------------------------------------------------------*/\r
-\r
-/**\r
- * task. h\r
- * <PRE>portTickType xTaskGetTickCount( void );</PRE>\r
- *\r
- * @return The count of ticks since vTaskStartScheduler was called.\r
- *\r
- * \page xTaskGetTickCount xTaskGetTickCount\r
- * \ingroup TaskUtils\r
- */\r
-portTickType xTaskGetTickCount( void ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <PRE>portTickType xTaskGetTickCountFromISR( void );</PRE>\r
- *\r
- * @return The count of ticks since vTaskStartScheduler was called.\r
- *\r
- * This is a version of xTaskGetTickCount() that is safe to be called from an\r
- * ISR - provided that portTickType is the natural word size of the\r
- * microcontroller being used or interrupt nesting is either not supported or\r
- * not being used.\r
- *\r
- * \page xTaskGetTickCount xTaskGetTickCount\r
- * \ingroup TaskUtils\r
- */\r
-portTickType xTaskGetTickCountFromISR( void ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <PRE>unsigned short uxTaskGetNumberOfTasks( void );</PRE>\r
- *\r
- * @return The number of tasks that the real time kernel is currently managing.\r
- * This includes all ready, blocked and suspended tasks. A task that\r
- * has been deleted but not yet freed by the idle task will also be\r
- * included in the count.\r
- *\r
- * \page uxTaskGetNumberOfTasks uxTaskGetNumberOfTasks\r
- * \ingroup TaskUtils\r
- */\r
-unsigned portBASE_TYPE uxTaskGetNumberOfTasks( void ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <PRE>signed char *pcTaskGetTaskName( xTaskHandle xTaskToQuery );</PRE>\r
- *\r
- * @return The text (human readable) name of the task referenced by the handle\r
- * xTaskToQueury. A task can query its own name by either passing in its own\r
- * handle, or by setting xTaskToQuery to NULL. INCLUDE_pcTaskGetTaskName must be\r
- * set to 1 in FreeRTOSConfig.h for pcTaskGetTaskName() to be available.\r
- *\r
- * \page pcTaskGetTaskName pcTaskGetTaskName\r
- * \ingroup TaskUtils\r
- */\r
-signed char *pcTaskGetTaskName( xTaskHandle xTaskToQuery );\r
-\r
-/**\r
- * task. h\r
- * <PRE>void vTaskList( char *pcWriteBuffer );</PRE>\r
- *\r
- * configUSE_TRACE_FACILITY must be defined as 1 for this function to be\r
- * available. See the configuration section for more information.\r
- *\r
- * NOTE: This function will disable interrupts for its duration. It is\r
- * not intended for normal application runtime use but as a debug aid.\r
- *\r
- * Lists all the current tasks, along with their current state and stack\r
- * usage high water mark.\r
- *\r
- * Tasks are reported as blocked ('B'), ready ('R'), deleted ('D') or\r
- * suspended ('S').\r
- *\r
- * @param pcWriteBuffer A buffer into which the above mentioned details\r
- * will be written, in ascii form. This buffer is assumed to be large\r
- * enough to contain the generated report. Approximately 40 bytes per\r
- * task should be sufficient.\r
- *\r
- * \page vTaskList vTaskList\r
- * \ingroup TaskUtils\r
- */\r
-void vTaskList( signed char *pcWriteBuffer ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <PRE>void vTaskGetRunTimeStats( char *pcWriteBuffer );</PRE>\r
- *\r
- * configGENERATE_RUN_TIME_STATS must be defined as 1 for this function\r
- * to be available. The application must also then provide definitions\r
- * for portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() and\r
- * portGET_RUN_TIME_COUNTER_VALUE to configure a peripheral timer/counter\r
- * and return the timers current count value respectively. The counter\r
- * should be at least 10 times the frequency of the tick count.\r
- *\r
- * NOTE: This function will disable interrupts for its duration. It is\r
- * not intended for normal application runtime use but as a debug aid.\r
- *\r
- * Setting configGENERATE_RUN_TIME_STATS to 1 will result in a total\r
- * accumulated execution time being stored for each task. The resolution\r
- * of the accumulated time value depends on the frequency of the timer\r
- * configured by the portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() macro.\r
- * Calling vTaskGetRunTimeStats() writes the total execution time of each\r
- * task into a buffer, both as an absolute count value and as a percentage\r
- * of the total system execution time.\r
- *\r
- * @param pcWriteBuffer A buffer into which the execution times will be\r
- * written, in ascii form. This buffer is assumed to be large enough to\r
- * contain the generated report. Approximately 40 bytes per task should\r
- * be sufficient.\r
- *\r
- * \page vTaskGetRunTimeStats vTaskGetRunTimeStats\r
- * \ingroup TaskUtils\r
- */\r
-void vTaskGetRunTimeStats( signed char *pcWriteBuffer ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <PRE>void vTaskStartTrace( char * pcBuffer, unsigned portBASE_TYPE uxBufferSize );</PRE>\r
- *\r
- * Starts a real time kernel activity trace. The trace logs the identity of\r
- * which task is running when.\r
- *\r
- * The trace file is stored in binary format. A separate DOS utility called\r
- * convtrce.exe is used to convert this into a tab delimited text file which\r
- * can be viewed and plotted in a spread sheet.\r
- *\r
- * @param pcBuffer The buffer into which the trace will be written.\r
- *\r
- * @param ulBufferSize The size of pcBuffer in bytes. The trace will continue\r
- * until either the buffer in full, or ulTaskEndTrace () is called.\r
- *\r
- * \page vTaskStartTrace vTaskStartTrace\r
- * \ingroup TaskUtils\r
- */\r
-void vTaskStartTrace( signed char * pcBuffer, unsigned long ulBufferSize ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task. h\r
- * <PRE>unsigned long ulTaskEndTrace( void );</PRE>\r
- *\r
- * Stops a kernel activity trace. See vTaskStartTrace ().\r
- *\r
- * @return The number of bytes that have been written into the trace buffer.\r
- *\r
- * \page usTaskEndTrace usTaskEndTrace\r
- * \ingroup TaskUtils\r
- */\r
-unsigned long ulTaskEndTrace( void ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * task.h\r
- * <PRE>unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask );</PRE>\r
- *\r
- * INCLUDE_uxTaskGetStackHighWaterMark must be set to 1 in FreeRTOSConfig.h for\r
- * this function to be available.\r
- *\r
- * Returns the high water mark of the stack associated with xTask. That is,\r
- * the minimum free stack space there has been (in words, so on a 32 bit machine\r
- * a value of 1 means 4 bytes) since the task started. The smaller the returned\r
- * number the closer the task has come to overflowing its stack.\r
- *\r
- * @param xTask Handle of the task associated with the stack to be checked.\r
- * Set xTask to NULL to check the stack of the calling task.\r
- *\r
- * @return The smallest amount of free stack space there has been (in bytes)\r
- * since the task referenced by xTask was created.\r
- */\r
-unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask ) PRIVILEGED_FUNCTION;\r
-\r
-/* When using trace macros it is sometimes necessary to include tasks.h before\r
-FreeRTOS.h. When this is done pdTASK_HOOK_CODE will not yet have been defined,\r
-so the following two prototypes will cause a compilation error. This can be\r
-fixed by simply guarding against the inclusion of these two prototypes unless\r
-they are explicitly required by the configUSE_APPLICATION_TASK_TAG configuration\r
-constant. */\r
-#ifdef configUSE_APPLICATION_TASK_TAG\r
- #if configUSE_APPLICATION_TASK_TAG == 1\r
- /**\r
- * task.h\r
- * <pre>void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction );</pre>\r
- *\r
- * Sets pxHookFunction to be the task hook function used by the task xTask.\r
- * Passing xTask as NULL has the effect of setting the calling tasks hook\r
- * function.\r
- */\r
- void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction ) PRIVILEGED_FUNCTION;\r
-\r
- /**\r
- * task.h\r
- * <pre>void xTaskGetApplicationTaskTag( xTaskHandle xTask );</pre>\r
- *\r
- * Returns the pxHookFunction value assigned to the task xTask.\r
- */\r
- pdTASK_HOOK_CODE xTaskGetApplicationTaskTag( xTaskHandle xTask ) PRIVILEGED_FUNCTION;\r
- #endif /* configUSE_APPLICATION_TASK_TAG ==1 */\r
-#endif /* ifdef configUSE_APPLICATION_TASK_TAG */\r
-\r
-/**\r
- * task.h\r
- * <pre>portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction );</pre>\r
- *\r
- * Calls the hook function associated with xTask. Passing xTask as NULL has\r
- * the effect of calling the Running tasks (the calling task) hook function.\r
- *\r
- * pvParameter is passed to the hook function for the task to interpret as it\r
- * wants.\r
- */\r
-portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, void *pvParameter ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * xTaskGetIdleTaskHandle() is only available if \r
- * INCLUDE_xTaskGetIdleTaskHandle is set to 1 in FreeRTOSConfig.h.\r
- *\r
- * Simply returns the handle of the idle task. It is not valid to call\r
- * xTaskGetIdleTaskHandle() before the scheduler has been started.\r
- */\r
-xTaskHandle xTaskGetIdleTaskHandle( void );\r
-\r
-/*-----------------------------------------------------------\r
- * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES\r
- *----------------------------------------------------------*/\r
-\r
-/*\r
- * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS ONLY\r
- * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS\r
- * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
- *\r
- * Called from the real time kernel tick (either preemptive or cooperative),\r
- * this increments the tick count and checks if any tasks that are blocked\r
- * for a finite period required removing from a blocked list and placing on\r
- * a ready list.\r
- */\r
-void vTaskIncrementTick( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN\r
- * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
- *\r
- * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.\r
- *\r
- * Removes the calling task from the ready list and places it both\r
- * on the list of tasks waiting for a particular event, and the\r
- * list of delayed tasks. The task will be removed from both lists\r
- * and replaced on the ready list should either the event occur (and\r
- * there be no higher priority tasks waiting on the same event) or\r
- * the delay period expires.\r
- *\r
- * @param pxEventList The list containing tasks that are blocked waiting\r
- * for the event to occur.\r
- *\r
- * @param xTicksToWait The maximum amount of time that the task should wait\r
- * for the event to occur. This is specified in kernel ticks,the constant\r
- * portTICK_RATE_MS can be used to convert kernel ticks into a real time\r
- * period.\r
- */\r
-void vTaskPlaceOnEventList( const xList * const pxEventList, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN\r
- * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
- *\r
- * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.\r
- *\r
- * This function performs nearly the same function as vTaskPlaceOnEventList().\r
- * The difference being that this function does not permit tasks to block\r
- * indefinitely, whereas vTaskPlaceOnEventList() does.\r
- *\r
- * @return pdTRUE if the task being removed has a higher priority than the task\r
- * making the call, otherwise pdFALSE.\r
- */\r
-void vTaskPlaceOnEventListRestricted( const xList * const pxEventList, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN\r
- * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
- *\r
- * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.\r
- *\r
- * Removes a task from both the specified event list and the list of blocked\r
- * tasks, and places it on a ready queue.\r
- *\r
- * xTaskRemoveFromEventList () will be called if either an event occurs to\r
- * unblock a task, or the block timeout period expires.\r
- *\r
- * @return pdTRUE if the task being removed has a higher priority than the task\r
- * making the call, otherwise pdFALSE.\r
- */\r
-signed portBASE_TYPE xTaskRemoveFromEventList( const xList * const pxEventList ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS ONLY\r
- * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS\r
- * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
- *\r
- * Sets the pointer to the current TCB to the TCB of the highest priority task\r
- * that is ready to run.\r
- */\r
-void vTaskSwitchContext( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Return the handle of the calling task.\r
- */\r
-xTaskHandle xTaskGetCurrentTaskHandle( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Capture the current time status for future reference.\r
- */\r
-void vTaskSetTimeOutState( xTimeOutType * const pxTimeOut ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Compare the time status now with that previously captured to see if the\r
- * timeout has expired.\r
- */\r
-portBASE_TYPE xTaskCheckForTimeOut( xTimeOutType * const pxTimeOut, portTickType * const pxTicksToWait ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Shortcut used by the queue implementation to prevent unnecessary call to\r
- * taskYIELD();\r
- */\r
-void vTaskMissedYield( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Returns the scheduler state as taskSCHEDULER_RUNNING,\r
- * taskSCHEDULER_NOT_STARTED or taskSCHEDULER_SUSPENDED.\r
- */\r
-portBASE_TYPE xTaskGetSchedulerState( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Raises the priority of the mutex holder to that of the calling task should\r
- * the mutex holder have a priority less than the calling task.\r
- */\r
-void vTaskPriorityInherit( xTaskHandle * const pxMutexHolder ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Set the priority of a task back to its proper priority in the case that it\r
- * inherited a higher priority while it was holding a semaphore.\r
- */\r
-void vTaskPriorityDisinherit( xTaskHandle * const pxMutexHolder ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Generic version of the task creation function which is in turn called by the\r
- * xTaskCreate() and xTaskCreateRestricted() macros.\r
- */\r
-signed portBASE_TYPE xTaskGenericCreate( pdTASK_CODE pxTaskCode, const signed char * const pcName, unsigned short usStackDepth, void *pvParameters, unsigned portBASE_TYPE uxPriority, xTaskHandle *pxCreatedTask, portSTACK_TYPE *puxStackBuffer, const xMemoryRegion * const xRegions ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Get the uxTCBNumber assigned to the task referenced by the xTask parameter.\r
- */\r
-unsigned portBASE_TYPE uxTaskGetTaskNumber( xTaskHandle xTask );\r
-\r
-/* \r
- * Set the uxTCBNumber of the task referenced by the xTask parameter to\r
- * ucHandle.\r
- */\r
-void vTaskSetTaskNumber( xTaskHandle xTask, unsigned portBASE_TYPE uxHandle );\r
-\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-#endif /* TASK_H */\r
-\r
-\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-\r
-#ifndef TIMERS_H\r
-#define TIMERS_H\r
-\r
-#ifndef INC_FREERTOS_H\r
- #error "include FreeRTOS.h must appear in source files before include timers.h"\r
-#endif\r
-\r
-#include "portable.h"\r
-#include "list.h"\r
-#include "task.h"\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-/* IDs for commands that can be sent/received on the timer queue. These are to\r
-be used solely through the macros that make up the public software timer API,\r
-as defined below. */\r
-#define tmrCOMMAND_START 0\r
-#define tmrCOMMAND_STOP 1\r
-#define tmrCOMMAND_CHANGE_PERIOD 2\r
-#define tmrCOMMAND_DELETE 3\r
-\r
-/*-----------------------------------------------------------\r
- * MACROS AND DEFINITIONS\r
- *----------------------------------------------------------*/\r
-\r
- /**\r
- * Type by which software timers are referenced. For example, a call to\r
- * xTimerCreate() returns an xTimerHandle variable that can then be used to\r
- * reference the subject timer in calls to other software timer API functions\r
- * (for example, xTimerStart(), xTimerReset(), etc.).\r
- */\r
-typedef void * xTimerHandle;\r
-\r
-/* Define the prototype to which timer callback functions must conform. */\r
-typedef void (*tmrTIMER_CALLBACK)( xTimerHandle xTimer );\r
-\r
-/**\r
- * xTimerHandle xTimerCreate( const signed char *pcTimerName,\r
- * portTickType xTimerPeriodInTicks,\r
- * unsigned portBASE_TYPE uxAutoReload,\r
- * void * pvTimerID,\r
- * tmrTIMER_CALLBACK pxCallbackFunction );\r
- *\r
- * Creates a new software timer instance. This allocates the storage required\r
- * by the new timer, initialises the new timers internal state, and returns a\r
- * handle by which the new timer can be referenced.\r
- *\r
- * Timers are created in the dormant state. The xTimerStart(), xTimerReset(),\r
- * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and\r
- * xTimerChangePeriodFromISR() API functions can all be used to transition a timer into the\r
- * active state.\r
- *\r
- * @param pcTimerName A text name that is assigned to the timer. This is done\r
- * purely to assist debugging. The kernel itself only ever references a timer by\r
- * its handle, and never by its name.\r
- *\r
- * @param xTimerPeriodInTicks The timer period. The time is defined in tick periods so\r
- * the constant portTICK_RATE_MS can be used to convert a time that has been\r
- * specified in milliseconds. For example, if the timer must expire after 100\r
- * ticks, then xTimerPeriodInTicks should be set to 100. Alternatively, if the timer\r
- * must expire after 500ms, then xPeriod can be set to ( 500 / portTICK_RATE_MS )\r
- * provided configTICK_RATE_HZ is less than or equal to 1000.\r
- *\r
- * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will\r
- * expire repeatedly with a frequency set by the xTimerPeriodInTicks parameter. If\r
- * uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and\r
- * enter the dormant state after it expires.\r
- *\r
- * @param pvTimerID An identifier that is assigned to the timer being created.\r
- * Typically this would be used in the timer callback function to identify which\r
- * timer expired when the same callback function is assigned to more than one\r
- * timer.\r
- *\r
- * @param pxCallbackFunction The function to call when the timer expires.\r
- * Callback functions must have the prototype defined by tmrTIMER_CALLBACK,\r
- * which is "void vCallbackFunction( xTimerHandle xTimer );".\r
- *\r
- * @return If the timer is successfully create then a handle to the newly\r
- * created timer is returned. If the timer cannot be created (because either\r
- * there is insufficient FreeRTOS heap remaining to allocate the timer\r
- * structures, or the timer period was set to 0) then 0 is returned.\r
- *\r
- * Example usage:\r
- *\r
- * #define NUM_TIMERS 5\r
- *\r
- * // An array to hold handles to the created timers.\r
- * xTimerHandle xTimers[ NUM_TIMERS ];\r
- *\r
- * // An array to hold a count of the number of times each timer expires.\r
- * long lExpireCounters[ NUM_TIMERS ] = { 0 };\r
- *\r
- * // Define a callback function that will be used by multiple timer instances.\r
- * // The callback function does nothing but count the number of times the\r
- * // associated timer expires, and stop the timer once the timer has expired\r
- * // 10 times.\r
- * void vTimerCallback( xTimerHandle pxTimer )\r
- * {\r
- * long lArrayIndex;\r
- * const long xMaxExpiryCountBeforeStopping = 10;\r
- *\r
- * // Optionally do something if the pxTimer parameter is NULL.\r
- * configASSERT( pxTimer );\r
- * \r
- * // Which timer expired?\r
- * lArrayIndex = ( long ) pvTimerGetTimerID( pxTimer );\r
- *\r
- * // Increment the number of times that pxTimer has expired.\r
- * lExpireCounters[ lArrayIndex ] += 1;\r
- *\r
- * // If the timer has expired 10 times then stop it from running.\r
- * if( lExpireCounters[ lArrayIndex ] == xMaxExpiryCountBeforeStopping )\r
- * {\r
- * // Do not use a block time if calling a timer API function from a\r
- * // timer callback function, as doing so could cause a deadlock!\r
- * xTimerStop( pxTimer, 0 );\r
- * }\r
- * }\r
- *\r
- * void main( void )\r
- * {\r
- * long x;\r
- *\r
- * // Create then start some timers. Starting the timers before the scheduler\r
- * // has been started means the timers will start running immediately that\r
- * // the scheduler starts.\r
- * for( x = 0; x < NUM_TIMERS; x++ )\r
- * {\r
- * xTimers[ x ] = xTimerCreate( "Timer", // Just a text name, not used by the kernel.\r
- * ( 100 * x ), // The timer period in ticks.\r
- * pdTRUE, // The timers will auto-reload themselves when they expire.\r
- * ( void * ) x, // Assign each timer a unique id equal to its array index.\r
- * vTimerCallback // Each timer calls the same callback when it expires.\r
- * );\r
- *\r
- * if( xTimers[ x ] == NULL )\r
- * {\r
- * // The timer was not created.\r
- * }\r
- * else\r
- * {\r
- * // Start the timer. No block time is specified, and even if one was\r
- * // it would be ignored because the scheduler has not yet been\r
- * // started.\r
- * if( xTimerStart( xTimers[ x ], 0 ) != pdPASS )\r
- * {\r
- * // The timer could not be set into the Active state.\r
- * }\r
- * }\r
- * }\r
- *\r
- * // ...\r
- * // Create tasks here.\r
- * // ...\r
- *\r
- * // Starting the scheduler will start the timers running as they have already\r
- * // been set into the active state.\r
- * xTaskStartScheduler();\r
- *\r
- * // Should not reach here.\r
- * for( ;; );\r
- * }\r
- */\r
-xTimerHandle xTimerCreate( const signed char *pcTimerName, portTickType xTimerPeriodInTicks, unsigned portBASE_TYPE uxAutoReload, void * pvTimerID, tmrTIMER_CALLBACK pxCallbackFunction ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * void *pvTimerGetTimerID( xTimerHandle xTimer );\r
- *\r
- * Returns the ID assigned to the timer.\r
- *\r
- * IDs are assigned to timers using the pvTimerID parameter of the call to\r
- * xTimerCreated() that was used to create the timer.\r
- *\r
- * If the same callback function is assigned to multiple timers then the timer\r
- * ID can be used within the callback function to identify which timer actually\r
- * expired.\r
- *\r
- * @param xTimer The timer being queried.\r
- *\r
- * @return The ID assigned to the timer being queried.\r
- *\r
- * Example usage:\r
- *\r
- * See the xTimerCreate() API function example usage scenario.\r
- */\r
-void *pvTimerGetTimerID( xTimerHandle xTimer ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * portBASE_TYPE xTimerIsTimerActive( xTimerHandle xTimer );\r
- *\r
- * Queries a timer to see if it is active or dormant.\r
- *\r
- * A timer will be dormant if:\r
- * 1) It has been created but not started, or\r
- * 2) It is an expired on-shot timer that has not been restarted.\r
- *\r
- * Timers are created in the dormant state. The xTimerStart(), xTimerReset(),\r
- * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and\r
- * xTimerChangePeriodFromISR() API functions can all be used to transition a timer into the\r
- * active state.\r
- *\r
- * @param xTimer The timer being queried.\r
- *\r
- * @return pdFALSE will be returned if the timer is dormant. A value other than\r
- * pdFALSE will be returned if the timer is active.\r
- *\r
- * Example usage:\r
- *\r
- * // This function assumes xTimer has already been created.\r
- * void vAFunction( xTimerHandle xTimer )\r
- * {\r
- * if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"\r
- * {\r
- * // xTimer is active, do something.\r
- * }\r
- * else\r
- * {\r
- * // xTimer is not active, do something else.\r
- * }\r
- * }\r
- */\r
-portBASE_TYPE xTimerIsTimerActive( xTimerHandle xTimer ) PRIVILEGED_FUNCTION;\r
-\r
-/**\r
- * xTimerGetTimerDaemonTaskHandle() is only available if \r
- * INCLUDE_xTimerGetTimerDaemonTaskHandle is set to 1 in FreeRTOSConfig.h.\r
- *\r
- * Simply returns the handle of the timer service/daemon task. It it not valid\r
- * to call xTimerGetTimerDaemonTaskHandle() before the scheduler has been started.\r
- */\r
-xTaskHandle xTimerGetTimerDaemonTaskHandle( void );\r
-\r
-/**\r
- * portBASE_TYPE xTimerStart( xTimerHandle xTimer, portTickType xBlockTime );\r
- *\r
- * Timer functionality is provided by a timer service/daemon task. Many of the\r
- * public FreeRTOS timer API functions send commands to the timer service task\r
- * though a queue called the timer command queue. The timer command queue is\r
- * private to the kernel itself and is not directly accessible to application\r
- * code. The length of the timer command queue is set by the\r
- * configTIMER_QUEUE_LENGTH configuration constant.\r
- *\r
- * xTimerStart() starts a timer that was previously created using the\r
- * xTimerCreate() API function. If the timer had already been started and was\r
- * already in the active state, then xTimerStart() has equivalent functionality\r
- * to the xTimerReset() API function.\r
- *\r
- * Starting a timer ensures the timer is in the active state. If the timer\r
- * is not stopped, deleted, or reset in the mean time, the callback function\r
- * associated with the timer will get called 'n' ticks after xTimerStart() was\r
- * called, where 'n' is the timers defined period.\r
- *\r
- * It is valid to call xTimerStart() before the scheduler has been started, but\r
- * when this is done the timer will not actually start until the scheduler is\r
- * started, and the timers expiry time will be relative to when the scheduler is\r
- * started, not relative to when xTimerStart() was called.\r
- *\r
- * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStart()\r
- * to be available.\r
- *\r
- * @param xTimer The handle of the timer being started/restarted.\r
- *\r
- * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
- * be held in the Blocked state to wait for the start command to be successfully\r
- * sent to the timer command queue, should the queue already be full when\r
- * xTimerStart() was called. xBlockTime is ignored if xTimerStart() is called\r
- * before the scheduler is started.\r
- *\r
- * @return pdFAIL will be returned if the start command could not be sent to\r
- * the timer command queue even after xBlockTime ticks had passed. pdPASS will\r
- * be returned if the command was successfully sent to the timer command queue.\r
- * When the command is actually processed will depend on the priority of the\r
- * timer service/daemon task relative to other tasks in the system, although the\r
- * timers expiry time is relative to when xTimerStart() is actually called. The\r
- * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY\r
- * configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * See the xTimerCreate() API function example usage scenario.\r
- *\r
- */\r
-#define xTimerStart( xTimer, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCount() ), NULL, ( xBlockTime ) )\r
-\r
-/**\r
- * portBASE_TYPE xTimerStop( xTimerHandle xTimer, portTickType xBlockTime );\r
- *\r
- * Timer functionality is provided by a timer service/daemon task. Many of the\r
- * public FreeRTOS timer API functions send commands to the timer service task\r
- * though a queue called the timer command queue. The timer command queue is\r
- * private to the kernel itself and is not directly accessible to application\r
- * code. The length of the timer command queue is set by the\r
- * configTIMER_QUEUE_LENGTH configuration constant.\r
- *\r
- * xTimerStop() stops a timer that was previously started using either of the\r
- * The xTimerStart(), xTimerReset(), xTimerStartFromISR(), xTimerResetFromISR(),\r
- * xTimerChangePeriod() or xTimerChangePeriodFromISR() API functions.\r
- *\r
- * Stopping a timer ensures the timer is not in the active state.\r
- *\r
- * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStop()\r
- * to be available.\r
- *\r
- * @param xTimer The handle of the timer being stopped.\r
- *\r
- * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
- * be held in the Blocked state to wait for the stop command to be successfully\r
- * sent to the timer command queue, should the queue already be full when\r
- * xTimerStop() was called. xBlockTime is ignored if xTimerStop() is called\r
- * before the scheduler is started.\r
- *\r
- * @return pdFAIL will be returned if the stop command could not be sent to\r
- * the timer command queue even after xBlockTime ticks had passed. pdPASS will\r
- * be returned if the command was successfully sent to the timer command queue.\r
- * When the command is actually processed will depend on the priority of the\r
- * timer service/daemon task relative to other tasks in the system. The timer\r
- * service/daemon task priority is set by the configTIMER_TASK_PRIORITY\r
- * configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * See the xTimerCreate() API function example usage scenario.\r
- *\r
- */\r
-#define xTimerStop( xTimer, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP, 0U, NULL, ( xBlockTime ) )\r
-\r
-/**\r
- * portBASE_TYPE xTimerChangePeriod( xTimerHandle xTimer,\r
- * portTickType xNewPeriod,\r
- * portTickType xBlockTime );\r
- *\r
- * Timer functionality is provided by a timer service/daemon task. Many of the\r
- * public FreeRTOS timer API functions send commands to the timer service task\r
- * though a queue called the timer command queue. The timer command queue is\r
- * private to the kernel itself and is not directly accessible to application\r
- * code. The length of the timer command queue is set by the\r
- * configTIMER_QUEUE_LENGTH configuration constant.\r
- *\r
- * xTimerChangePeriod() changes the period of a timer that was previously\r
- * created using the xTimerCreate() API function.\r
- *\r
- * xTimerChangePeriod() can be called to change the period of an active or\r
- * dormant state timer.\r
- *\r
- * The configUSE_TIMERS configuration constant must be set to 1 for\r
- * xTimerChangePeriod() to be available.\r
- *\r
- * @param xTimer The handle of the timer that is having its period changed.\r
- *\r
- * @param xNewPeriod The new period for xTimer. Timer periods are specified in\r
- * tick periods, so the constant portTICK_RATE_MS can be used to convert a time\r
- * that has been specified in milliseconds. For example, if the timer must\r
- * expire after 100 ticks, then xNewPeriod should be set to 100. Alternatively,\r
- * if the timer must expire after 500ms, then xNewPeriod can be set to\r
- * ( 500 / portTICK_RATE_MS ) provided configTICK_RATE_HZ is less than\r
- * or equal to 1000.\r
- *\r
- * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
- * be held in the Blocked state to wait for the change period command to be\r
- * successfully sent to the timer command queue, should the queue already be\r
- * full when xTimerChangePeriod() was called. xBlockTime is ignored if\r
- * xTimerChangePeriod() is called before the scheduler is started.\r
- *\r
- * @return pdFAIL will be returned if the change period command could not be\r
- * sent to the timer command queue even after xBlockTime ticks had passed.\r
- * pdPASS will be returned if the command was successfully sent to the timer\r
- * command queue. When the command is actually processed will depend on the\r
- * priority of the timer service/daemon task relative to other tasks in the\r
- * system. The timer service/daemon task priority is set by the\r
- * configTIMER_TASK_PRIORITY configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * // This function assumes xTimer has already been created. If the timer\r
- * // referenced by xTimer is already active when it is called, then the timer\r
- * // is deleted. If the timer referenced by xTimer is not active when it is\r
- * // called, then the period of the timer is set to 500ms and the timer is\r
- * // started.\r
- * void vAFunction( xTimerHandle xTimer )\r
- * {\r
- * if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"\r
- * {\r
- * // xTimer is already active - delete it.\r
- * xTimerDelete( xTimer );\r
- * }\r
- * else\r
- * {\r
- * // xTimer is not active, change its period to 500ms. This will also\r
- * // cause the timer to start. Block for a maximum of 100 ticks if the\r
- * // change period command cannot immediately be sent to the timer\r
- * // command queue.\r
- * if( xTimerChangePeriod( xTimer, 500 / portTICK_RATE_MS, 100 ) == pdPASS )\r
- * {\r
- * // The command was successfully sent.\r
- * }\r
- * else\r
- * {\r
- * // The command could not be sent, even after waiting for 100 ticks\r
- * // to pass. Take appropriate action here.\r
- * }\r
- * }\r
- * }\r
- */\r
- #define xTimerChangePeriod( xTimer, xNewPeriod, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD, ( xNewPeriod ), NULL, ( xBlockTime ) )\r
-\r
-/**\r
- * portBASE_TYPE xTimerDelete( xTimerHandle xTimer, portTickType xBlockTime );\r
- *\r
- * Timer functionality is provided by a timer service/daemon task. Many of the\r
- * public FreeRTOS timer API functions send commands to the timer service task\r
- * though a queue called the timer command queue. The timer command queue is\r
- * private to the kernel itself and is not directly accessible to application\r
- * code. The length of the timer command queue is set by the\r
- * configTIMER_QUEUE_LENGTH configuration constant.\r
- *\r
- * xTimerDelete() deletes a timer that was previously created using the\r
- * xTimerCreate() API function.\r
- *\r
- * The configUSE_TIMERS configuration constant must be set to 1 for\r
- * xTimerDelete() to be available.\r
- *\r
- * @param xTimer The handle of the timer being deleted.\r
- *\r
- * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
- * be held in the Blocked state to wait for the delete command to be\r
- * successfully sent to the timer command queue, should the queue already be\r
- * full when xTimerDelete() was called. xBlockTime is ignored if xTimerDelete()\r
- * is called before the scheduler is started.\r
- *\r
- * @return pdFAIL will be returned if the delete command could not be sent to\r
- * the timer command queue even after xBlockTime ticks had passed. pdPASS will\r
- * be returned if the command was successfully sent to the timer command queue.\r
- * When the command is actually processed will depend on the priority of the\r
- * timer service/daemon task relative to other tasks in the system. The timer\r
- * service/daemon task priority is set by the configTIMER_TASK_PRIORITY\r
- * configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * See the xTimerChangePeriod() API function example usage scenario.\r
- */\r
-#define xTimerDelete( xTimer, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_DELETE, 0U, NULL, ( xBlockTime ) )\r
-\r
-/**\r
- * portBASE_TYPE xTimerReset( xTimerHandle xTimer, portTickType xBlockTime );\r
- *\r
- * Timer functionality is provided by a timer service/daemon task. Many of the\r
- * public FreeRTOS timer API functions send commands to the timer service task\r
- * though a queue called the timer command queue. The timer command queue is\r
- * private to the kernel itself and is not directly accessible to application\r
- * code. The length of the timer command queue is set by the\r
- * configTIMER_QUEUE_LENGTH configuration constant.\r
- *\r
- * xTimerReset() re-starts a timer that was previously created using the\r
- * xTimerCreate() API function. If the timer had already been started and was\r
- * already in the active state, then xTimerReset() will cause the timer to\r
- * re-evaluate its expiry time so that it is relative to when xTimerReset() was\r
- * called. If the timer was in the dormant state then xTimerReset() has\r
- * equivalent functionality to the xTimerStart() API function.\r
- *\r
- * Resetting a timer ensures the timer is in the active state. If the timer\r
- * is not stopped, deleted, or reset in the mean time, the callback function\r
- * associated with the timer will get called 'n' ticks after xTimerReset() was\r
- * called, where 'n' is the timers defined period.\r
- *\r
- * It is valid to call xTimerReset() before the scheduler has been started, but\r
- * when this is done the timer will not actually start until the scheduler is\r
- * started, and the timers expiry time will be relative to when the scheduler is\r
- * started, not relative to when xTimerReset() was called.\r
- *\r
- * The configUSE_TIMERS configuration constant must be set to 1 for xTimerReset()\r
- * to be available.\r
- *\r
- * @param xTimer The handle of the timer being reset/started/restarted.\r
- *\r
- * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
- * be held in the Blocked state to wait for the reset command to be successfully\r
- * sent to the timer command queue, should the queue already be full when\r
- * xTimerReset() was called. xBlockTime is ignored if xTimerReset() is called\r
- * before the scheduler is started.\r
- *\r
- * @return pdFAIL will be returned if the reset command could not be sent to\r
- * the timer command queue even after xBlockTime ticks had passed. pdPASS will\r
- * be returned if the command was successfully sent to the timer command queue.\r
- * When the command is actually processed will depend on the priority of the\r
- * timer service/daemon task relative to other tasks in the system, although the\r
- * timers expiry time is relative to when xTimerStart() is actually called. The\r
- * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY\r
- * configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * // When a key is pressed, an LCD back-light is switched on. If 5 seconds pass\r
- * // without a key being pressed, then the LCD back-light is switched off. In\r
- * // this case, the timer is a one-shot timer.\r
- *\r
- * xTimerHandle xBacklightTimer = NULL;\r
- *\r
- * // The callback function assigned to the one-shot timer. In this case the\r
- * // parameter is not used.\r
- * void vBacklightTimerCallback( xTimerHandle pxTimer )\r
- * {\r
- * // The timer expired, therefore 5 seconds must have passed since a key\r
- * // was pressed. Switch off the LCD back-light.\r
- * vSetBacklightState( BACKLIGHT_OFF );\r
- * }\r
- *\r
- * // The key press event handler.\r
- * void vKeyPressEventHandler( char cKey )\r
- * {\r
- * // Ensure the LCD back-light is on, then reset the timer that is\r
- * // responsible for turning the back-light off after 5 seconds of\r
- * // key inactivity. Wait 10 ticks for the command to be successfully sent\r
- * // if it cannot be sent immediately.\r
- * vSetBacklightState( BACKLIGHT_ON );\r
- * if( xTimerReset( xBacklightTimer, 100 ) != pdPASS )\r
- * {\r
- * // The reset command was not executed successfully. Take appropriate\r
- * // action here.\r
- * }\r
- *\r
- * // Perform the rest of the key processing here.\r
- * }\r
- *\r
- * void main( void )\r
- * {\r
- * long x;\r
- *\r
- * // Create then start the one-shot timer that is responsible for turning\r
- * // the back-light off if no keys are pressed within a 5 second period.\r
- * xBacklightTimer = xTimerCreate( "BacklightTimer", // Just a text name, not used by the kernel.\r
- * ( 5000 / portTICK_RATE_MS), // The timer period in ticks.\r
- * pdFALSE, // The timer is a one-shot timer.\r
- * 0, // The id is not used by the callback so can take any value.\r
- * vBacklightTimerCallback // The callback function that switches the LCD back-light off.\r
- * );\r
- *\r
- * if( xBacklightTimer == NULL )\r
- * {\r
- * // The timer was not created.\r
- * }\r
- * else\r
- * {\r
- * // Start the timer. No block time is specified, and even if one was\r
- * // it would be ignored because the scheduler has not yet been\r
- * // started.\r
- * if( xTimerStart( xBacklightTimer, 0 ) != pdPASS )\r
- * {\r
- * // The timer could not be set into the Active state.\r
- * }\r
- * }\r
- *\r
- * // ...\r
- * // Create tasks here.\r
- * // ...\r
- *\r
- * // Starting the scheduler will start the timer running as it has already\r
- * // been set into the active state.\r
- * xTaskStartScheduler();\r
- *\r
- * // Should not reach here.\r
- * for( ;; );\r
- * }\r
- */\r
-#define xTimerReset( xTimer, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCount() ), NULL, ( xBlockTime ) )\r
-\r
-/**\r
- * portBASE_TYPE xTimerStartFromISR( xTimerHandle xTimer,\r
- * portBASE_TYPE *pxHigherPriorityTaskWoken );\r
- *\r
- * A version of xTimerStart() that can be called from an interrupt service\r
- * routine.\r
- *\r
- * @param xTimer The handle of the timer being started/restarted.\r
- *\r
- * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most\r
- * of its time in the Blocked state, waiting for messages to arrive on the timer\r
- * command queue. Calling xTimerStartFromISR() writes a message to the timer\r
- * command queue, so has the potential to transition the timer service/daemon\r
- * task out of the Blocked state. If calling xTimerStartFromISR() causes the\r
- * timer service/daemon task to leave the Blocked state, and the timer service/\r
- * daemon task has a priority equal to or greater than the currently executing\r
- * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will\r
- * get set to pdTRUE internally within the xTimerStartFromISR() function. If\r
- * xTimerStartFromISR() sets this value to pdTRUE then a context switch should\r
- * be performed before the interrupt exits.\r
- *\r
- * @return pdFAIL will be returned if the start command could not be sent to\r
- * the timer command queue. pdPASS will be returned if the command was\r
- * successfully sent to the timer command queue. When the command is actually\r
- * processed will depend on the priority of the timer service/daemon task\r
- * relative to other tasks in the system, although the timers expiry time is\r
- * relative to when xTimerStartFromISR() is actually called. The timer service/daemon\r
- * task priority is set by the configTIMER_TASK_PRIORITY configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * // This scenario assumes xBacklightTimer has already been created. When a\r
- * // key is pressed, an LCD back-light is switched on. If 5 seconds pass\r
- * // without a key being pressed, then the LCD back-light is switched off. In\r
- * // this case, the timer is a one-shot timer, and unlike the example given for\r
- * // the xTimerReset() function, the key press event handler is an interrupt\r
- * // service routine.\r
- *\r
- * // The callback function assigned to the one-shot timer. In this case the\r
- * // parameter is not used.\r
- * void vBacklightTimerCallback( xTimerHandle pxTimer )\r
- * {\r
- * // The timer expired, therefore 5 seconds must have passed since a key\r
- * // was pressed. Switch off the LCD back-light.\r
- * vSetBacklightState( BACKLIGHT_OFF );\r
- * }\r
- *\r
- * // The key press interrupt service routine.\r
- * void vKeyPressEventInterruptHandler( void )\r
- * {\r
- * portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
- *\r
- * // Ensure the LCD back-light is on, then restart the timer that is\r
- * // responsible for turning the back-light off after 5 seconds of\r
- * // key inactivity. This is an interrupt service routine so can only\r
- * // call FreeRTOS API functions that end in "FromISR".\r
- * vSetBacklightState( BACKLIGHT_ON );\r
- *\r
- * // xTimerStartFromISR() or xTimerResetFromISR() could be called here\r
- * // as both cause the timer to re-calculate its expiry time.\r
- * // xHigherPriorityTaskWoken was initialised to pdFALSE when it was\r
- * // declared (in this function).\r
- * if( xTimerStartFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )\r
- * {\r
- * // The start command was not executed successfully. Take appropriate\r
- * // action here.\r
- * }\r
- *\r
- * // Perform the rest of the key processing here.\r
- *\r
- * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch\r
- * // should be performed. The syntax required to perform a context switch\r
- * // from inside an ISR varies from port to port, and from compiler to\r
- * // compiler. Inspect the demos for the port you are using to find the\r
- * // actual syntax required.\r
- * if( xHigherPriorityTaskWoken != pdFALSE )\r
- * {\r
- * // Call the interrupt safe yield function here (actual function\r
- * // depends on the FreeRTOS port being used.\r
- * }\r
- * }\r
- */\r
-#define xTimerStartFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )\r
-\r
-/**\r
- * portBASE_TYPE xTimerStopFromISR( xTimerHandle xTimer,\r
- * portBASE_TYPE *pxHigherPriorityTaskWoken );\r
- *\r
- * A version of xTimerStop() that can be called from an interrupt service\r
- * routine.\r
- *\r
- * @param xTimer The handle of the timer being stopped.\r
- *\r
- * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most\r
- * of its time in the Blocked state, waiting for messages to arrive on the timer\r
- * command queue. Calling xTimerStopFromISR() writes a message to the timer\r
- * command queue, so has the potential to transition the timer service/daemon\r
- * task out of the Blocked state. If calling xTimerStopFromISR() causes the\r
- * timer service/daemon task to leave the Blocked state, and the timer service/\r
- * daemon task has a priority equal to or greater than the currently executing\r
- * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will\r
- * get set to pdTRUE internally within the xTimerStopFromISR() function. If\r
- * xTimerStopFromISR() sets this value to pdTRUE then a context switch should\r
- * be performed before the interrupt exits.\r
- *\r
- * @return pdFAIL will be returned if the stop command could not be sent to\r
- * the timer command queue. pdPASS will be returned if the command was\r
- * successfully sent to the timer command queue. When the command is actually\r
- * processed will depend on the priority of the timer service/daemon task\r
- * relative to other tasks in the system. The timer service/daemon task\r
- * priority is set by the configTIMER_TASK_PRIORITY configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * // This scenario assumes xTimer has already been created and started. When\r
- * // an interrupt occurs, the timer should be simply stopped.\r
- *\r
- * // The interrupt service routine that stops the timer.\r
- * void vAnExampleInterruptServiceRoutine( void )\r
- * {\r
- * portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
- *\r
- * // The interrupt has occurred - simply stop the timer.\r
- * // xHigherPriorityTaskWoken was set to pdFALSE where it was defined\r
- * // (within this function). As this is an interrupt service routine, only\r
- * // FreeRTOS API functions that end in "FromISR" can be used.\r
- * if( xTimerStopFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )\r
- * {\r
- * // The stop command was not executed successfully. Take appropriate\r
- * // action here.\r
- * }\r
- *\r
- * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch\r
- * // should be performed. The syntax required to perform a context switch\r
- * // from inside an ISR varies from port to port, and from compiler to\r
- * // compiler. Inspect the demos for the port you are using to find the\r
- * // actual syntax required.\r
- * if( xHigherPriorityTaskWoken != pdFALSE )\r
- * {\r
- * // Call the interrupt safe yield function here (actual function\r
- * // depends on the FreeRTOS port being used.\r
- * }\r
- * }\r
- */\r
-#define xTimerStopFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP, 0, ( pxHigherPriorityTaskWoken ), 0U )\r
-\r
-/**\r
- * portBASE_TYPE xTimerChangePeriodFromISR( xTimerHandle xTimer,\r
- * portTickType xNewPeriod,\r
- * portBASE_TYPE *pxHigherPriorityTaskWoken );\r
- *\r
- * A version of xTimerChangePeriod() that can be called from an interrupt\r
- * service routine.\r
- *\r
- * @param xTimer The handle of the timer that is having its period changed.\r
- *\r
- * @param xNewPeriod The new period for xTimer. Timer periods are specified in\r
- * tick periods, so the constant portTICK_RATE_MS can be used to convert a time\r
- * that has been specified in milliseconds. For example, if the timer must\r
- * expire after 100 ticks, then xNewPeriod should be set to 100. Alternatively,\r
- * if the timer must expire after 500ms, then xNewPeriod can be set to\r
- * ( 500 / portTICK_RATE_MS ) provided configTICK_RATE_HZ is less than\r
- * or equal to 1000.\r
- *\r
- * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most\r
- * of its time in the Blocked state, waiting for messages to arrive on the timer\r
- * command queue. Calling xTimerChangePeriodFromISR() writes a message to the\r
- * timer command queue, so has the potential to transition the timer service/\r
- * daemon task out of the Blocked state. If calling xTimerChangePeriodFromISR()\r
- * causes the timer service/daemon task to leave the Blocked state, and the\r
- * timer service/daemon task has a priority equal to or greater than the\r
- * currently executing task (the task that was interrupted), then\r
- * *pxHigherPriorityTaskWoken will get set to pdTRUE internally within the\r
- * xTimerChangePeriodFromISR() function. If xTimerChangePeriodFromISR() sets\r
- * this value to pdTRUE then a context switch should be performed before the\r
- * interrupt exits.\r
- *\r
- * @return pdFAIL will be returned if the command to change the timers period\r
- * could not be sent to the timer command queue. pdPASS will be returned if the\r
- * command was successfully sent to the timer command queue. When the command\r
- * is actually processed will depend on the priority of the timer service/daemon\r
- * task relative to other tasks in the system. The timer service/daemon task\r
- * priority is set by the configTIMER_TASK_PRIORITY configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * // This scenario assumes xTimer has already been created and started. When\r
- * // an interrupt occurs, the period of xTimer should be changed to 500ms.\r
- *\r
- * // The interrupt service routine that changes the period of xTimer.\r
- * void vAnExampleInterruptServiceRoutine( void )\r
- * {\r
- * portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
- *\r
- * // The interrupt has occurred - change the period of xTimer to 500ms.\r
- * // xHigherPriorityTaskWoken was set to pdFALSE where it was defined\r
- * // (within this function). As this is an interrupt service routine, only\r
- * // FreeRTOS API functions that end in "FromISR" can be used.\r
- * if( xTimerChangePeriodFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )\r
- * {\r
- * // The command to change the timers period was not executed\r
- * // successfully. Take appropriate action here.\r
- * }\r
- *\r
- * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch\r
- * // should be performed. The syntax required to perform a context switch\r
- * // from inside an ISR varies from port to port, and from compiler to\r
- * // compiler. Inspect the demos for the port you are using to find the\r
- * // actual syntax required.\r
- * if( xHigherPriorityTaskWoken != pdFALSE )\r
- * {\r
- * // Call the interrupt safe yield function here (actual function\r
- * // depends on the FreeRTOS port being used.\r
- * }\r
- * }\r
- */\r
-#define xTimerChangePeriodFromISR( xTimer, xNewPeriod, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD, ( xNewPeriod ), ( pxHigherPriorityTaskWoken ), 0U )\r
-\r
-/**\r
- * portBASE_TYPE xTimerResetFromISR( xTimerHandle xTimer,\r
- * portBASE_TYPE *pxHigherPriorityTaskWoken );\r
- *\r
- * A version of xTimerReset() that can be called from an interrupt service\r
- * routine.\r
- *\r
- * @param xTimer The handle of the timer that is to be started, reset, or\r
- * restarted.\r
- *\r
- * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most\r
- * of its time in the Blocked state, waiting for messages to arrive on the timer\r
- * command queue. Calling xTimerResetFromISR() writes a message to the timer\r
- * command queue, so has the potential to transition the timer service/daemon\r
- * task out of the Blocked state. If calling xTimerResetFromISR() causes the\r
- * timer service/daemon task to leave the Blocked state, and the timer service/\r
- * daemon task has a priority equal to or greater than the currently executing\r
- * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will\r
- * get set to pdTRUE internally within the xTimerResetFromISR() function. If\r
- * xTimerResetFromISR() sets this value to pdTRUE then a context switch should\r
- * be performed before the interrupt exits.\r
- *\r
- * @return pdFAIL will be returned if the reset command could not be sent to\r
- * the timer command queue. pdPASS will be returned if the command was\r
- * successfully sent to the timer command queue. When the command is actually\r
- * processed will depend on the priority of the timer service/daemon task\r
- * relative to other tasks in the system, although the timers expiry time is\r
- * relative to when xTimerResetFromISR() is actually called. The timer service/daemon\r
- * task priority is set by the configTIMER_TASK_PRIORITY configuration constant.\r
- *\r
- * Example usage:\r
- *\r
- * // This scenario assumes xBacklightTimer has already been created. When a\r
- * // key is pressed, an LCD back-light is switched on. If 5 seconds pass\r
- * // without a key being pressed, then the LCD back-light is switched off. In\r
- * // this case, the timer is a one-shot timer, and unlike the example given for\r
- * // the xTimerReset() function, the key press event handler is an interrupt\r
- * // service routine.\r
- *\r
- * // The callback function assigned to the one-shot timer. In this case the\r
- * // parameter is not used.\r
- * void vBacklightTimerCallback( xTimerHandle pxTimer )\r
- * {\r
- * // The timer expired, therefore 5 seconds must have passed since a key\r
- * // was pressed. Switch off the LCD back-light.\r
- * vSetBacklightState( BACKLIGHT_OFF );\r
- * }\r
- *\r
- * // The key press interrupt service routine.\r
- * void vKeyPressEventInterruptHandler( void )\r
- * {\r
- * portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
- *\r
- * // Ensure the LCD back-light is on, then reset the timer that is\r
- * // responsible for turning the back-light off after 5 seconds of\r
- * // key inactivity. This is an interrupt service routine so can only\r
- * // call FreeRTOS API functions that end in "FromISR".\r
- * vSetBacklightState( BACKLIGHT_ON );\r
- *\r
- * // xTimerStartFromISR() or xTimerResetFromISR() could be called here\r
- * // as both cause the timer to re-calculate its expiry time.\r
- * // xHigherPriorityTaskWoken was initialised to pdFALSE when it was\r
- * // declared (in this function).\r
- * if( xTimerResetFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )\r
- * {\r
- * // The reset command was not executed successfully. Take appropriate\r
- * // action here.\r
- * }\r
- *\r
- * // Perform the rest of the key processing here.\r
- *\r
- * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch\r
- * // should be performed. The syntax required to perform a context switch\r
- * // from inside an ISR varies from port to port, and from compiler to\r
- * // compiler. Inspect the demos for the port you are using to find the\r
- * // actual syntax required.\r
- * if( xHigherPriorityTaskWoken != pdFALSE )\r
- * {\r
- * // Call the interrupt safe yield function here (actual function\r
- * // depends on the FreeRTOS port being used.\r
- * }\r
- * }\r
- */\r
-#define xTimerResetFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )\r
-\r
-/*\r
- * Functions beyond this part are not part of the public API and are intended\r
- * for use by the kernel only.\r
- */\r
-portBASE_TYPE xTimerCreateTimerTask( void ) PRIVILEGED_FUNCTION;\r
-portBASE_TYPE xTimerGenericCommand( xTimerHandle xTimer, portBASE_TYPE xCommandID, portTickType xOptionalValue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portTickType xBlockTime ) PRIVILEGED_FUNCTION;\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-#endif /* TIMERS_H */\r
-\r
-\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-\r
-#include <stdlib.h>\r
-#include "FreeRTOS.h"\r
-#include "list.h"\r
-\r
-/*-----------------------------------------------------------\r
- * PUBLIC LIST API documented in list.h\r
- *----------------------------------------------------------*/\r
-\r
-void vListInitialise( xList *pxList )\r
-{\r
- /* The list structure contains a list item which is used to mark the\r
- end of the list. To initialise the list the list end is inserted\r
- as the only list entry. */\r
- pxList->pxIndex = ( xListItem * ) &( pxList->xListEnd );\r
-\r
- /* The list end value is the highest possible value in the list to\r
- ensure it remains at the end of the list. */\r
- pxList->xListEnd.xItemValue = portMAX_DELAY;\r
-\r
- /* The list end next and previous pointers point to itself so we know\r
- when the list is empty. */\r
- pxList->xListEnd.pxNext = ( xListItem * ) &( pxList->xListEnd );\r
- pxList->xListEnd.pxPrevious = ( xListItem * ) &( pxList->xListEnd );\r
-\r
- pxList->uxNumberOfItems = ( unsigned portBASE_TYPE ) 0U;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vListInitialiseItem( xListItem *pxItem )\r
-{\r
- /* Make sure the list item is not recorded as being on a list. */\r
- pxItem->pvContainer = NULL;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vListInsertEnd( xList *pxList, xListItem *pxNewListItem )\r
-{\r
-volatile xListItem * pxIndex;\r
-\r
- /* Insert a new list item into pxList, but rather than sort the list,\r
- makes the new list item the last item to be removed by a call to\r
- pvListGetOwnerOfNextEntry. This means it has to be the item pointed to by\r
- the pxIndex member. */\r
- pxIndex = pxList->pxIndex;\r
-\r
- pxNewListItem->pxNext = pxIndex->pxNext;\r
- pxNewListItem->pxPrevious = pxList->pxIndex;\r
- pxIndex->pxNext->pxPrevious = ( volatile xListItem * ) pxNewListItem;\r
- pxIndex->pxNext = ( volatile xListItem * ) pxNewListItem;\r
- pxList->pxIndex = ( volatile xListItem * ) pxNewListItem;\r
-\r
- /* Remember which list the item is in. */\r
- pxNewListItem->pvContainer = ( void * ) pxList;\r
-\r
- ( pxList->uxNumberOfItems )++;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vListInsert( xList *pxList, xListItem *pxNewListItem )\r
-{\r
-volatile xListItem *pxIterator;\r
-portTickType xValueOfInsertion;\r
-\r
- /* Insert the new list item into the list, sorted in ulListItem order. */\r
- xValueOfInsertion = pxNewListItem->xItemValue;\r
-\r
- /* If the list already contains a list item with the same item value then\r
- the new list item should be placed after it. This ensures that TCB's which\r
- are stored in ready lists (all of which have the same ulListItem value)\r
- get an equal share of the CPU. However, if the xItemValue is the same as\r
- the back marker the iteration loop below will not end. This means we need\r
- to guard against this by checking the value first and modifying the\r
- algorithm slightly if necessary. */\r
- if( xValueOfInsertion == portMAX_DELAY )\r
- {\r
- pxIterator = pxList->xListEnd.pxPrevious;\r
- }\r
- else\r
- {\r
- /* *** NOTE ***********************************************************\r
- If you find your application is crashing here then likely causes are:\r
- 1) Stack overflow -\r
- see http://www.freertos.org/Stacks-and-stack-overflow-checking.html\r
- 2) Incorrect interrupt priority assignment, especially on Cortex-M3\r
- parts where numerically high priority values denote low actual\r
- interrupt priories, which can seem counter intuitive. See\r
- configMAX_SYSCALL_INTERRUPT_PRIORITY on http://www.freertos.org/a00110.html\r
- 3) Calling an API function from within a critical section or when\r
- the scheduler is suspended.\r
- 4) Using a queue or semaphore before it has been initialised or\r
- before the scheduler has been started (are interrupts firing\r
- before vTaskStartScheduler() has been called?).\r
- See http://www.freertos.org/FAQHelp.html for more tips.\r
- **********************************************************************/\r
- \r
- for( pxIterator = ( xListItem * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext )\r
- {\r
- /* There is nothing to do here, we are just iterating to the\r
- wanted insertion position. */\r
- }\r
- }\r
-\r
- pxNewListItem->pxNext = pxIterator->pxNext;\r
- pxNewListItem->pxNext->pxPrevious = ( volatile xListItem * ) pxNewListItem;\r
- pxNewListItem->pxPrevious = pxIterator;\r
- pxIterator->pxNext = ( volatile xListItem * ) pxNewListItem;\r
-\r
- /* Remember which list the item is in. This allows fast removal of the\r
- item later. */\r
- pxNewListItem->pvContainer = ( void * ) pxList;\r
-\r
- ( pxList->uxNumberOfItems )++;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vListRemove( xListItem *pxItemToRemove )\r
-{\r
-xList * pxList;\r
-\r
- pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;\r
- pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;\r
- \r
- /* The list item knows which list it is in. Obtain the list from the list\r
- item. */\r
- pxList = ( xList * ) pxItemToRemove->pvContainer;\r
-\r
- /* Make sure the index is left pointing to a valid item. */\r
- if( pxList->pxIndex == pxItemToRemove )\r
- {\r
- pxList->pxIndex = pxItemToRemove->pxPrevious;\r
- }\r
-\r
- pxItemToRemove->pvContainer = NULL;\r
- ( pxList->uxNumberOfItems )--;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-/*-----------------------------------------------------------\r
- * Implementation of functions defined in portable.h for the ARM CM3 port.\r
- *----------------------------------------------------------*/\r
-\r
-/* Scheduler includes. */\r
-#include "FreeRTOS.h"\r
-#include "task.h"\r
-\r
-/* For backward compatibility, ensure configKERNEL_INTERRUPT_PRIORITY is\r
-defined. The value should also ensure backward compatibility.\r
-FreeRTOS.org versions prior to V4.4.0 did not include this definition. */\r
-#ifndef configKERNEL_INTERRUPT_PRIORITY\r
- #define configKERNEL_INTERRUPT_PRIORITY 255\r
-#endif\r
-\r
-#if configMAX_SYSCALL_INTERRUPT_PRIORITY == 0\r
- #error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html\r
-#endif\r
-\r
-/* Constants required to manipulate the NVIC. */\r
-#define portNVIC_SYSTICK_CTRL ( ( volatile unsigned long *) 0xe000e010 )\r
-#define portNVIC_SYSTICK_LOAD ( ( volatile unsigned long *) 0xe000e014 )\r
-#define portNVIC_INT_CTRL ( ( volatile unsigned long *) 0xe000ed04 )\r
-#define portNVIC_SYSPRI2 ( ( volatile unsigned long *) 0xe000ed20 )\r
-#define portNVIC_SYSTICK_CLK 0x00000004\r
-#define portNVIC_SYSTICK_INT 0x00000002\r
-#define portNVIC_SYSTICK_ENABLE 0x00000001\r
-#define portNVIC_PENDSVSET 0x10000000\r
-#define portNVIC_PENDSV_PRI ( ( ( unsigned long ) configKERNEL_INTERRUPT_PRIORITY ) << 16 )\r
-#define portNVIC_SYSTICK_PRI ( ( ( unsigned long ) configKERNEL_INTERRUPT_PRIORITY ) << 24 )\r
-\r
-/* Constants required to set up the initial stack. */\r
-#define portINITIAL_XPSR ( 0x01000000 )\r
-\r
-/* The priority used by the kernel is assigned to a variable to make access\r
-from inline assembler easier. */\r
-const unsigned long ulKernelPriority = configKERNEL_INTERRUPT_PRIORITY;\r
-\r
-/* Each task maintains its own interrupt status in the critical nesting\r
-variable. */\r
-static unsigned portBASE_TYPE uxCriticalNesting = 0xaaaaaaaa;\r
-\r
-/*\r
- * Setup the timer to generate the tick interrupts.\r
- */\r
-static void prvSetupTimerInterrupt( void );\r
-\r
-/*\r
- * Exception handlers.\r
- */\r
-void xPortPendSVHandler( void ) __attribute__ (( naked ));\r
-void xPortSysTickHandler( void );\r
-void vPortSVCHandler( void ) __attribute__ (( naked ));\r
-\r
-/*\r
- * Start first task is a separate function so it can be tested in isolation.\r
- */\r
-static void prvPortStartFirstTask( void ) __attribute__ (( naked ));\r
-\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * See header file for description.\r
- */\r
-portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )\r
-{\r
- /* Simulate the stack frame as it would be created by a context switch\r
- interrupt. */\r
- pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */\r
- *pxTopOfStack = portINITIAL_XPSR; /* xPSR */\r
- pxTopOfStack--;\r
- *pxTopOfStack = ( portSTACK_TYPE ) pxCode; /* PC */\r
- pxTopOfStack--;\r
- *pxTopOfStack = 0; /* LR */\r
- pxTopOfStack -= 5; /* R12, R3, R2 and R1. */\r
- *pxTopOfStack = ( portSTACK_TYPE ) pvParameters; /* R0 */\r
- pxTopOfStack -= 8; /* R11, R10, R9, R8, R7, R6, R5 and R4. */\r
-\r
- return pxTopOfStack;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vPortSVCHandler( void )\r
-{\r
- __asm volatile (\r
- " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */\r
- " ldr r1, [r3] \n" /* Use pxCurrentTCBConst to get the pxCurrentTCB address. */\r
- " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */\r
- " ldmia r0!, {r4-r11} \n" /* Pop the registers that are not automatically saved on exception entry and the critical nesting count. */\r
- " msr psp, r0 \n" /* Restore the task stack pointer. */\r
- " mov r0, #0 \n"\r
- " msr basepri, r0 \n"\r
- " orr r14, #0xd \n"\r
- " bx r14 \n"\r
- " \n"\r
- " .align 2 \n"\r
- "pxCurrentTCBConst2: .word pxCurrentTCB \n"\r
- );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvPortStartFirstTask( void )\r
-{\r
- __asm volatile(\r
- " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */\r
- " ldr r0, [r0] \n"\r
- " ldr r0, [r0] \n"\r
- " msr msp, r0 \n" /* Set the msp back to the start of the stack. */\r
- " cpsie i \n" /* Globally enable interrupts. */\r
- " svc 0 \n" /* System call to start first task. */\r
- " nop \n"\r
- );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * See header file for description.\r
- */\r
-portBASE_TYPE xPortStartScheduler( void )\r
-{\r
- /* Make PendSV, CallSV and SysTick the same priroity as the kernel. */\r
- *(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;\r
- *(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;\r
-\r
- /* Start the timer that generates the tick ISR. Interrupts are disabled\r
- here already. */\r
- prvSetupTimerInterrupt();\r
-\r
- /* Initialise the critical nesting count ready for the first task. */\r
- uxCriticalNesting = 0;\r
-\r
- /* Start the first task. */\r
- prvPortStartFirstTask();\r
-\r
- /* Should not get here! */\r
- return 0;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vPortEndScheduler( void )\r
-{\r
- /* It is unlikely that the CM3 port will require this function as there\r
- is nothing to return to. */\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vPortYieldFromISR( void )\r
-{\r
- /* Set a PendSV to request a context switch. */\r
- *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vPortEnterCritical( void )\r
-{\r
- portDISABLE_INTERRUPTS();\r
- uxCriticalNesting++;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vPortExitCritical( void )\r
-{\r
- uxCriticalNesting--;\r
- if( uxCriticalNesting == 0 )\r
- {\r
- portENABLE_INTERRUPTS();\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void xPortPendSVHandler( void )\r
-{\r
- /* This is a naked function. */\r
-\r
- __asm volatile\r
- (\r
- " mrs r0, psp \n"\r
- " \n"\r
- " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */\r
- " ldr r2, [r3] \n"\r
- " \n"\r
- " stmdb r0!, {r4-r11} \n" /* Save the remaining registers. */\r
- " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */\r
- " \n"\r
- " stmdb sp!, {r3, r14} \n"\r
- " mov r0, %0 \n"\r
- " msr basepri, r0 \n"\r
- " bl vTaskSwitchContext \n"\r
- " mov r0, #0 \n"\r
- " msr basepri, r0 \n"\r
- " ldmia sp!, {r3, r14} \n"\r
- " \n" /* Restore the context, including the critical nesting count. */\r
- " ldr r1, [r3] \n"\r
- " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */\r
- " ldmia r0!, {r4-r11} \n" /* Pop the registers. */\r
- " msr psp, r0 \n"\r
- " bx r14 \n"\r
- " \n"\r
- " .align 2 \n"\r
- "pxCurrentTCBConst: .word pxCurrentTCB \n"\r
- ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY)\r
- );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void xPortSysTickHandler( void )\r
-{\r
-unsigned long ulDummy;\r
-\r
- /* If using preemption, also force a context switch. */\r
- #if configUSE_PREEMPTION == 1\r
- *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET;\r
- #endif\r
-\r
- ulDummy = portSET_INTERRUPT_MASK_FROM_ISR();\r
- {\r
- vTaskIncrementTick();\r
- }\r
- portCLEAR_INTERRUPT_MASK_FROM_ISR( ulDummy );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * Setup the systick timer to generate the tick interrupts at the required\r
- * frequency.\r
- */\r
-void prvSetupTimerInterrupt( void )\r
-{\r
- /* Configure SysTick to interrupt at the requested rate. */\r
- *(portNVIC_SYSTICK_LOAD) = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;\r
- *(portNVIC_SYSTICK_CTRL) = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
- \r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-\r
-#ifndef PORTMACRO_H\r
-#define PORTMACRO_H\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-/*-----------------------------------------------------------\r
- * Port specific definitions. \r
- *\r
- * The settings in this file configure FreeRTOS correctly for the\r
- * given hardware and compiler.\r
- *\r
- * These settings should not be altered.\r
- *-----------------------------------------------------------\r
- */\r
-\r
-/* Type definitions. */\r
-#define portCHAR char\r
-#define portFLOAT float\r
-#define portDOUBLE double\r
-#define portLONG long\r
-#define portSHORT short\r
-#define portSTACK_TYPE unsigned portLONG\r
-#define portBASE_TYPE long\r
-\r
-#if( configUSE_16_BIT_TICKS == 1 )\r
- typedef unsigned portSHORT portTickType;\r
- #define portMAX_DELAY ( portTickType ) 0xffff\r
-#else\r
- typedef unsigned portLONG portTickType;\r
- #define portMAX_DELAY ( portTickType ) 0xffffffff\r
-#endif\r
-/*-----------------------------------------------------------*/ \r
-\r
-/* Architecture specifics. */\r
-#define portSTACK_GROWTH ( -1 )\r
-#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ ) \r
-#define portBYTE_ALIGNMENT 8\r
-/*-----------------------------------------------------------*/ \r
-\r
-\r
-/* Scheduler utilities. */\r
-extern void vPortYieldFromISR( void );\r
-\r
-#define portYIELD() vPortYieldFromISR()\r
-\r
-#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) vPortYieldFromISR()\r
-/*-----------------------------------------------------------*/\r
-\r
-\r
-/* Critical section management. */\r
-\r
-/* \r
- * Set basepri to portMAX_SYSCALL_INTERRUPT_PRIORITY without effecting other\r
- * registers. r0 is clobbered.\r
- */ \r
-#define portSET_INTERRUPT_MASK() \\r
- __asm volatile \\r
- ( \\r
- " mov r0, %0 \n" \\r
- " msr basepri, r0 \n" \\r
- ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY):"r0" \\r
- )\r
- \r
-/*\r
- * Set basepri back to 0 without effective other registers.\r
- * r0 is clobbered.\r
- */\r
-#define portCLEAR_INTERRUPT_MASK() \\r
- __asm volatile \\r
- ( \\r
- " mov r0, #0 \n" \\r
- " msr basepri, r0 \n" \\r
- :::"r0" \\r
- )\r
-\r
-#define portSET_INTERRUPT_MASK_FROM_ISR() 0;portSET_INTERRUPT_MASK()\r
-#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) portCLEAR_INTERRUPT_MASK();(void)x\r
-\r
-\r
-extern void vPortEnterCritical( void );\r
-extern void vPortExitCritical( void );\r
-\r
-#define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()\r
-#define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()\r
-#define portENTER_CRITICAL() vPortEnterCritical()\r
-#define portEXIT_CRITICAL() vPortExitCritical()\r
-/*-----------------------------------------------------------*/\r
-\r
-/* Task function macros as described on the FreeRTOS.org WEB site. */\r
-#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )\r
-#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )\r
-\r
-#define portNOP()\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif /* PORTMACRO_H */\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
- \r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-/*\r
- * A sample implementation of pvPortMalloc() and vPortFree() that permits\r
- * allocated blocks to be freed, but does not combine adjacent free blocks\r
- * into a single larger block.\r
- *\r
- * See heap_1.c and heap_3.c for alternative implementations, and the memory\r
- * management pages of http://www.FreeRTOS.org for more information.\r
- */\r
-#include <stdlib.h>\r
-\r
-/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining\r
-all the API functions to use the MPU wrappers. That should only be done when\r
-task.h is included from an application file. */\r
-#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
-#include "FreeRTOS.h"\r
-#include "task.h"\r
-\r
-#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
-/* Allocate the memory for the heap. The struct is used to force byte\r
-alignment without using any non-portable code. */\r
-static union xRTOS_HEAP\r
-{\r
- #if portBYTE_ALIGNMENT == 8\r
- volatile portDOUBLE dDummy;\r
- #else\r
- volatile unsigned long ulDummy;\r
- #endif\r
- unsigned char ucHeap[ configTOTAL_HEAP_SIZE ];\r
-} xHeap;\r
-\r
-/* Define the linked list structure. This is used to link free blocks in order\r
-of their size. */\r
-typedef struct A_BLOCK_LINK\r
-{\r
- struct A_BLOCK_LINK *pxNextFreeBlock; /*<< The next free block in the list. */\r
- size_t xBlockSize; /*<< The size of the free block. */\r
-} xBlockLink;\r
-\r
-\r
-static const unsigned short heapSTRUCT_SIZE = ( sizeof( xBlockLink ) + portBYTE_ALIGNMENT - ( sizeof( xBlockLink ) % portBYTE_ALIGNMENT ) );\r
-#define heapMINIMUM_BLOCK_SIZE ( ( size_t ) ( heapSTRUCT_SIZE * 2 ) )\r
-\r
-/* Create a couple of list links to mark the start and end of the list. */\r
-static xBlockLink xStart, xEnd;\r
-\r
-/* Keeps track of the number of free bytes remaining, but says nothing about\r
-fragmentation. */\r
-static size_t xFreeBytesRemaining = configTOTAL_HEAP_SIZE;\r
-\r
-/* STATIC FUNCTIONS ARE DEFINED AS MACROS TO MINIMIZE THE FUNCTION CALL DEPTH. */\r
-\r
-/*\r
- * Insert a block into the list of free blocks - which is ordered by size of\r
- * the block. Small blocks at the start of the list and large blocks at the end\r
- * of the list.\r
- */\r
-#define prvInsertBlockIntoFreeList( pxBlockToInsert ) \\r
-{ \\r
-xBlockLink *pxIterator; \\r
-size_t xBlockSize; \\r
- \\r
- xBlockSize = pxBlockToInsert->xBlockSize; \\r
- \\r
- /* Iterate through the list until a block is found that has a larger size */ \\r
- /* than the block we are inserting. */ \\r
- for( pxIterator = &xStart; pxIterator->pxNextFreeBlock->xBlockSize < xBlockSize; pxIterator = pxIterator->pxNextFreeBlock ) \\r
- { \\r
- /* There is nothing to do here - just iterate to the correct position. */ \\r
- } \\r
- \\r
- /* Update the list to include the block being inserted in the correct */ \\r
- /* position. */ \\r
- pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock; \\r
- pxIterator->pxNextFreeBlock = pxBlockToInsert; \\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#define prvHeapInit() \\r
-{ \\r
-xBlockLink *pxFirstFreeBlock; \\r
- \\r
- /* xStart is used to hold a pointer to the first item in the list of free */ \\r
- /* blocks. The void cast is used to prevent compiler warnings. */ \\r
- xStart.pxNextFreeBlock = ( void * ) xHeap.ucHeap; \\r
- xStart.xBlockSize = ( size_t ) 0; \\r
- \\r
- /* xEnd is used to mark the end of the list of free blocks. */ \\r
- xEnd.xBlockSize = configTOTAL_HEAP_SIZE; \\r
- xEnd.pxNextFreeBlock = NULL; \\r
- \\r
- /* To start with there is a single free block that is sized to take up the \\r
- entire heap space. */ \\r
- pxFirstFreeBlock = ( void * ) xHeap.ucHeap; \\r
- pxFirstFreeBlock->xBlockSize = configTOTAL_HEAP_SIZE; \\r
- pxFirstFreeBlock->pxNextFreeBlock = &xEnd; \\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void *pvPortMalloc( size_t xWantedSize )\r
-{\r
-xBlockLink *pxBlock, *pxPreviousBlock, *pxNewBlockLink;\r
-static portBASE_TYPE xHeapHasBeenInitialised = pdFALSE;\r
-void *pvReturn = NULL;\r
-\r
- vTaskSuspendAll();\r
- {\r
- /* If this is the first call to malloc then the heap will require\r
- initialisation to setup the list of free blocks. */\r
- if( xHeapHasBeenInitialised == pdFALSE )\r
- {\r
- prvHeapInit();\r
- xHeapHasBeenInitialised = pdTRUE;\r
- }\r
-\r
- /* The wanted size is increased so it can contain a xBlockLink\r
- structure in addition to the requested amount of bytes. */\r
- if( xWantedSize > 0 )\r
- {\r
- xWantedSize += heapSTRUCT_SIZE;\r
-\r
- /* Ensure that blocks are always aligned to the required number of bytes. */\r
- if( xWantedSize & portBYTE_ALIGNMENT_MASK )\r
- {\r
- /* Byte alignment required. */\r
- xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );\r
- }\r
- }\r
-\r
- if( ( xWantedSize > 0 ) && ( xWantedSize < configTOTAL_HEAP_SIZE ) )\r
- {\r
- /* Blocks are stored in byte order - traverse the list from the start\r
- (smallest) block until one of adequate size is found. */\r
- pxPreviousBlock = &xStart;\r
- pxBlock = xStart.pxNextFreeBlock;\r
- while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock ) )\r
- {\r
- pxPreviousBlock = pxBlock;\r
- pxBlock = pxBlock->pxNextFreeBlock;\r
- }\r
-\r
- /* If we found the end marker then a block of adequate size was not found. */\r
- if( pxBlock != &xEnd )\r
- {\r
- /* Return the memory space - jumping over the xBlockLink structure\r
- at its start. */\r
- pvReturn = ( void * ) ( ( ( unsigned char * ) pxPreviousBlock->pxNextFreeBlock ) + heapSTRUCT_SIZE );\r
-\r
- /* This block is being returned for use so must be taken our of the\r
- list of free blocks. */\r
- pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;\r
-\r
- /* If the block is larger than required it can be split into two. */\r
- if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )\r
- {\r
- /* This block is to be split into two. Create a new block\r
- following the number of bytes requested. The void cast is\r
- used to prevent byte alignment warnings from the compiler. */\r
- pxNewBlockLink = ( void * ) ( ( ( unsigned char * ) pxBlock ) + xWantedSize );\r
-\r
- /* Calculate the sizes of two blocks split from the single\r
- block. */\r
- pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;\r
- pxBlock->xBlockSize = xWantedSize;\r
-\r
- /* Insert the new block into the list of free blocks. */\r
- prvInsertBlockIntoFreeList( ( pxNewBlockLink ) );\r
- }\r
- \r
- xFreeBytesRemaining -= pxBlock->xBlockSize;\r
- }\r
- }\r
- }\r
- xTaskResumeAll();\r
-\r
- #if( configUSE_MALLOC_FAILED_HOOK == 1 )\r
- {\r
- if( pvReturn == NULL )\r
- {\r
- extern void vApplicationMallocFailedHook( void );\r
- vApplicationMallocFailedHook();\r
- }\r
- }\r
- #endif\r
-\r
- return pvReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vPortFree( void *pv )\r
-{\r
-unsigned char *puc = ( unsigned char * ) pv;\r
-xBlockLink *pxLink;\r
-\r
- if( pv )\r
- {\r
- /* The memory being freed will have an xBlockLink structure immediately\r
- before it. */\r
- puc -= heapSTRUCT_SIZE;\r
-\r
- /* This casting is to keep the compiler from issuing warnings. */\r
- pxLink = ( void * ) puc;\r
-\r
- vTaskSuspendAll();\r
- {\r
- /* Add this block to the list of free blocks. */\r
- prvInsertBlockIntoFreeList( ( ( xBlockLink * ) pxLink ) );\r
- xFreeBytesRemaining += pxLink->xBlockSize;\r
- }\r
- xTaskResumeAll();\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-size_t xPortGetFreeHeapSize( void )\r
-{\r
- return xFreeBytesRemaining;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vPortInitialiseBlocks( void )\r
-{\r
- /* This just exists to keep the linker quiet. */\r
-}\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-#include <stdlib.h>\r
-#include <string.h>\r
-\r
-/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining\r
-all the API functions to use the MPU wrappers. That should only be done when\r
-task.h is included from an application file. */\r
-#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
-#include "FreeRTOS.h"\r
-#include "task.h"\r
-\r
-#if ( configUSE_CO_ROUTINES == 1 )\r
- #include "croutine.h"\r
-#endif\r
-\r
-#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
-/*-----------------------------------------------------------\r
- * PUBLIC LIST API documented in list.h\r
- *----------------------------------------------------------*/\r
-\r
-/* Constants used with the cRxLock and cTxLock structure members. */\r
-#define queueUNLOCKED ( ( signed portBASE_TYPE ) -1 )\r
-#define queueLOCKED_UNMODIFIED ( ( signed portBASE_TYPE ) 0 )\r
-\r
-#define queueERRONEOUS_UNBLOCK ( -1 )\r
-\r
-/* For internal use only. */\r
-#define queueSEND_TO_BACK ( 0 )\r
-#define queueSEND_TO_FRONT ( 1 )\r
-\r
-/* Effectively make a union out of the xQUEUE structure. */\r
-#define pxMutexHolder pcTail\r
-#define uxQueueType pcHead\r
-#define uxRecursiveCallCount pcReadFrom\r
-#define queueQUEUE_IS_MUTEX NULL\r
-\r
-/* Semaphores do not actually store or copy data, so have an items size of\r
-zero. */\r
-#define queueSEMAPHORE_QUEUE_ITEM_LENGTH ( ( unsigned portBASE_TYPE ) 0 )\r
-#define queueDONT_BLOCK ( ( portTickType ) 0U )\r
-#define queueMUTEX_GIVE_BLOCK_TIME ( ( portTickType ) 0U )\r
-\r
-/* These definitions *must* match those in queue.h. */\r
-#define queueQUEUE_TYPE_BASE ( 0U )\r
-#define queueQUEUE_TYPE_MUTEX ( 1U )\r
-#define queueQUEUE_TYPE_COUNTING_SEMAPHORE ( 2U )\r
-#define queueQUEUE_TYPE_BINARY_SEMAPHORE ( 3U )\r
-#define queueQUEUE_TYPE_RECURSIVE_MUTEX ( 4U )\r
-\r
-/*\r
- * Definition of the queue used by the scheduler.\r
- * Items are queued by copy, not reference.\r
- */\r
-typedef struct QueueDefinition\r
-{\r
- signed char *pcHead; /*< Points to the beginning of the queue storage area. */\r
- signed char *pcTail; /*< Points to the byte at the end of the queue storage area. Once more byte is allocated than necessary to store the queue items, this is used as a marker. */\r
-\r
- signed char *pcWriteTo; /*< Points to the free next place in the storage area. */\r
- signed char *pcReadFrom; /*< Points to the last place that a queued item was read from. */\r
-\r
- xList xTasksWaitingToSend; /*< List of tasks that are blocked waiting to post onto this queue. Stored in priority order. */\r
- xList xTasksWaitingToReceive; /*< List of tasks that are blocked waiting to read from this queue. Stored in priority order. */\r
-\r
- volatile unsigned portBASE_TYPE uxMessagesWaiting;/*< The number of items currently in the queue. */\r
- unsigned portBASE_TYPE uxLength; /*< The length of the queue defined as the number of items it will hold, not the number of bytes. */\r
- unsigned portBASE_TYPE uxItemSize; /*< The size of each items that the queue will hold. */\r
-\r
- signed portBASE_TYPE xRxLock; /*< Stores the number of items received from the queue (removed from the queue) while the queue was locked. Set to queueUNLOCKED when the queue is not locked. */\r
- signed portBASE_TYPE xTxLock; /*< Stores the number of items transmitted to the queue (added to the queue) while the queue was locked. Set to queueUNLOCKED when the queue is not locked. */\r
- \r
- #if ( configUSE_TRACE_FACILITY == 1 )\r
- unsigned char ucQueueNumber;\r
- unsigned char ucQueueType;\r
- #endif\r
-\r
-} xQUEUE;\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * Inside this file xQueueHandle is a pointer to a xQUEUE structure.\r
- * To keep the definition private the API header file defines it as a\r
- * pointer to void.\r
- */\r
-typedef xQUEUE * xQueueHandle;\r
-\r
-/*\r
- * Prototypes for public functions are included here so we don't have to\r
- * include the API header file (as it defines xQueueHandle differently). These\r
- * functions are documented in the API header file.\r
- */\r
-xQueueHandle xQueueGenericCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize, unsigned char ucQueueType ) PRIVILEGED_FUNCTION;\r
-signed portBASE_TYPE xQueueGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;\r
-unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-void vQueueDelete( xQueueHandle xQueue ) PRIVILEGED_FUNCTION;\r
-signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;\r
-signed portBASE_TYPE xQueueGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking ) PRIVILEGED_FUNCTION;\r
-signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;\r
-xQueueHandle xQueueCreateMutex( unsigned char ucQueueType ) PRIVILEGED_FUNCTION;\r
-xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount ) PRIVILEGED_FUNCTION;\r
-portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle xMutex, portTickType xBlockTime ) PRIVILEGED_FUNCTION;\r
-portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle xMutex ) PRIVILEGED_FUNCTION;\r
-signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;\r
-signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking ) PRIVILEGED_FUNCTION;\r
-signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-void vQueueWaitForMessageRestricted( xQueueHandle pxQueue, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
-unsigned char ucQueueGetQueueNumber( xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-void vQueueSetQueueNumber( xQueueHandle pxQueue, unsigned char ucQueueNumber ) PRIVILEGED_FUNCTION;\r
-unsigned char ucQueueGetQueueType( xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-portBASE_TYPE xQueueGenericReset( xQueueHandle pxQueue, portBASE_TYPE xNewQueue ) PRIVILEGED_FUNCTION;\r
-xTaskHandle xQueueGetMutexHolder( xQueueHandle xSemaphore ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Co-routine queue functions differ from task queue functions. Co-routines are\r
- * an optional component.\r
- */\r
-#if configUSE_CO_ROUTINES == 1\r
- signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken ) PRIVILEGED_FUNCTION;\r
- signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxTaskWoken ) PRIVILEGED_FUNCTION;\r
- signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
- signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
-#endif\r
-\r
-/*\r
- * The queue registry is just a means for kernel aware debuggers to locate\r
- * queue structures. It has no other purpose so is an optional component.\r
- */\r
-#if configQUEUE_REGISTRY_SIZE > 0\r
-\r
- /* The type stored within the queue registry array. This allows a name\r
- to be assigned to each queue making kernel aware debugging a little\r
- more user friendly. */\r
- typedef struct QUEUE_REGISTRY_ITEM\r
- {\r
- signed char *pcQueueName;\r
- xQueueHandle xHandle;\r
- } xQueueRegistryItem;\r
-\r
- /* The queue registry is simply an array of xQueueRegistryItem structures.\r
- The pcQueueName member of a structure being NULL is indicative of the\r
- array position being vacant. */\r
- xQueueRegistryItem xQueueRegistry[ configQUEUE_REGISTRY_SIZE ];\r
-\r
- /* Removes a queue from the registry by simply setting the pcQueueName\r
- member to NULL. */\r
- static void vQueueUnregisterQueue( xQueueHandle xQueue ) PRIVILEGED_FUNCTION;\r
- void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcQueueName ) PRIVILEGED_FUNCTION;\r
-#endif\r
-\r
-/*\r
- * Unlocks a queue locked by a call to prvLockQueue. Locking a queue does not\r
- * prevent an ISR from adding or removing items to the queue, but does prevent\r
- * an ISR from removing tasks from the queue event lists. If an ISR finds a\r
- * queue is locked it will instead increment the appropriate queue lock count\r
- * to indicate that a task may require unblocking. When the queue in unlocked\r
- * these lock counts are inspected, and the appropriate action taken.\r
- */\r
-static void prvUnlockQueue( xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Uses a critical section to determine if there is any data in a queue.\r
- *\r
- * @return pdTRUE if the queue contains no items, otherwise pdFALSE.\r
- */\r
-static signed portBASE_TYPE prvIsQueueEmpty( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Uses a critical section to determine if there is any space in a queue.\r
- *\r
- * @return pdTRUE if there is no space, otherwise pdFALSE;\r
- */\r
-static signed portBASE_TYPE prvIsQueueFull( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Copies an item into the queue, either at the front of the queue or the\r
- * back of the queue.\r
- */\r
-static void prvCopyDataToQueue( xQUEUE *pxQueue, const void *pvItemToQueue, portBASE_TYPE xPosition ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Copies an item out of a queue.\r
- */\r
-static void prvCopyDataFromQueue( xQUEUE * const pxQueue, const void *pvBuffer ) PRIVILEGED_FUNCTION;\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * Macro to mark a queue as locked. Locking a queue prevents an ISR from\r
- * accessing the queue event lists.\r
- */\r
-#define prvLockQueue( pxQueue ) \\r
- taskENTER_CRITICAL(); \\r
- { \\r
- if( ( pxQueue )->xRxLock == queueUNLOCKED ) \\r
- { \\r
- ( pxQueue )->xRxLock = queueLOCKED_UNMODIFIED; \\r
- } \\r
- if( ( pxQueue )->xTxLock == queueUNLOCKED ) \\r
- { \\r
- ( pxQueue )->xTxLock = queueLOCKED_UNMODIFIED; \\r
- } \\r
- } \\r
- taskEXIT_CRITICAL()\r
-/*-----------------------------------------------------------*/\r
-\r
-\r
-/*-----------------------------------------------------------\r
- * PUBLIC QUEUE MANAGEMENT API documented in queue.h\r
- *----------------------------------------------------------*/\r
-\r
-portBASE_TYPE xQueueGenericReset( xQueueHandle pxQueue, portBASE_TYPE xNewQueue )\r
-{\r
- configASSERT( pxQueue );\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- pxQueue->pcTail = pxQueue->pcHead + ( pxQueue->uxLength * pxQueue->uxItemSize );\r
- pxQueue->uxMessagesWaiting = ( unsigned portBASE_TYPE ) 0U;\r
- pxQueue->pcWriteTo = pxQueue->pcHead;\r
- pxQueue->pcReadFrom = pxQueue->pcHead + ( ( pxQueue->uxLength - ( unsigned portBASE_TYPE ) 1U ) * pxQueue->uxItemSize );\r
- pxQueue->xRxLock = queueUNLOCKED;\r
- pxQueue->xTxLock = queueUNLOCKED;\r
-\r
- if( xNewQueue == pdFALSE )\r
- {\r
- /* If there are tasks blocked waiting to read from the queue, then \r
- the tasks will remain blocked as after this function exits the queue \r
- will still be empty. If there are tasks blocked waiting to write to \r
- the queue, then one should be unblocked as after this function exits \r
- it will be possible to write to it. */\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
- {\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
- else\r
- {\r
- /* Ensure the event queues start in the correct state. */\r
- vListInitialise( &( pxQueue->xTasksWaitingToSend ) );\r
- vListInitialise( &( pxQueue->xTasksWaitingToReceive ) ); \r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- /* A value is returned for calling semantic consistency with previous\r
- versions. */\r
- return pdPASS;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-xQueueHandle xQueueGenericCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize, unsigned char ucQueueType )\r
-{\r
-xQUEUE *pxNewQueue;\r
-size_t xQueueSizeInBytes;\r
-xQueueHandle xReturn = NULL;\r
-\r
- /* Remove compiler warnings about unused parameters should\r
- configUSE_TRACE_FACILITY not be set to 1. */\r
- ( void ) ucQueueType;\r
-\r
- /* Allocate the new queue structure. */\r
- if( uxQueueLength > ( unsigned portBASE_TYPE ) 0 )\r
- {\r
- pxNewQueue = ( xQUEUE * ) pvPortMalloc( sizeof( xQUEUE ) );\r
- if( pxNewQueue != NULL )\r
- {\r
- /* Create the list of pointers to queue items. The queue is one byte\r
- longer than asked for to make wrap checking easier/faster. */\r
- xQueueSizeInBytes = ( size_t ) ( uxQueueLength * uxItemSize ) + ( size_t ) 1;\r
-\r
- pxNewQueue->pcHead = ( signed char * ) pvPortMalloc( xQueueSizeInBytes );\r
- if( pxNewQueue->pcHead != NULL )\r
- {\r
- /* Initialise the queue members as described above where the\r
- queue type is defined. */\r
- pxNewQueue->uxLength = uxQueueLength;\r
- pxNewQueue->uxItemSize = uxItemSize;\r
- xQueueGenericReset( pxNewQueue, pdTRUE );\r
- #if ( configUSE_TRACE_FACILITY == 1 )\r
- {\r
- pxNewQueue->ucQueueType = ucQueueType;\r
- }\r
- #endif /* configUSE_TRACE_FACILITY */\r
-\r
- traceQUEUE_CREATE( pxNewQueue );\r
- xReturn = pxNewQueue;\r
- }\r
- else\r
- {\r
- traceQUEUE_CREATE_FAILED( ucQueueType );\r
- vPortFree( pxNewQueue );\r
- }\r
- }\r
- }\r
-\r
- configASSERT( xReturn );\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_MUTEXES == 1 )\r
-\r
- xQueueHandle xQueueCreateMutex( unsigned char ucQueueType )\r
- {\r
- xQUEUE *pxNewQueue;\r
-\r
- /* Prevent compiler warnings about unused parameters if\r
- configUSE_TRACE_FACILITY does not equal 1. */\r
- ( void ) ucQueueType;\r
-\r
- /* Allocate the new queue structure. */\r
- pxNewQueue = ( xQUEUE * ) pvPortMalloc( sizeof( xQUEUE ) );\r
- if( pxNewQueue != NULL )\r
- {\r
- /* Information required for priority inheritance. */\r
- pxNewQueue->pxMutexHolder = NULL;\r
- pxNewQueue->uxQueueType = queueQUEUE_IS_MUTEX;\r
-\r
- /* Queues used as a mutex no data is actually copied into or out\r
- of the queue. */\r
- pxNewQueue->pcWriteTo = NULL;\r
- pxNewQueue->pcReadFrom = NULL;\r
-\r
- /* Each mutex has a length of 1 (like a binary semaphore) and\r
- an item size of 0 as nothing is actually copied into or out\r
- of the mutex. */\r
- pxNewQueue->uxMessagesWaiting = ( unsigned portBASE_TYPE ) 0U;\r
- pxNewQueue->uxLength = ( unsigned portBASE_TYPE ) 1U;\r
- pxNewQueue->uxItemSize = ( unsigned portBASE_TYPE ) 0U;\r
- pxNewQueue->xRxLock = queueUNLOCKED;\r
- pxNewQueue->xTxLock = queueUNLOCKED;\r
-\r
- #if ( configUSE_TRACE_FACILITY == 1 )\r
- {\r
- pxNewQueue->ucQueueType = ucQueueType;\r
- }\r
- #endif\r
-\r
- /* Ensure the event queues start with the correct state. */\r
- vListInitialise( &( pxNewQueue->xTasksWaitingToSend ) );\r
- vListInitialise( &( pxNewQueue->xTasksWaitingToReceive ) );\r
-\r
- traceCREATE_MUTEX( pxNewQueue );\r
-\r
- /* Start with the semaphore in the expected state. */\r
- xQueueGenericSend( pxNewQueue, NULL, ( portTickType ) 0U, queueSEND_TO_BACK );\r
- }\r
- else\r
- {\r
- traceCREATE_MUTEX_FAILED();\r
- }\r
-\r
- configASSERT( pxNewQueue );\r
- return pxNewQueue;\r
- }\r
-\r
-#endif /* configUSE_MUTEXES */\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( ( configUSE_MUTEXES == 1 ) && ( INCLUDE_xQueueGetMutexHolder == 1 ) )\r
-\r
- void* xQueueGetMutexHolder( xQueueHandle xSemaphore )\r
- {\r
- void *pxReturn;\r
-\r
- /* This function is called by xSemaphoreGetMutexHolder(), and should not\r
- be called directly. Note: This is is a good way of determining if the\r
- calling task is the mutex holder, but not a good way of determining the\r
- identity of the mutex holder, as the holder may change between the \r
- following critical section exiting and the function returning. */\r
- taskENTER_CRITICAL();\r
- {\r
- if( xSemaphore->uxQueueType == queueQUEUE_IS_MUTEX )\r
- {\r
- pxReturn = ( void * ) xSemaphore->pxMutexHolder;\r
- }\r
- else\r
- {\r
- pxReturn = NULL;\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
- \r
- return pxReturn;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_RECURSIVE_MUTEXES == 1 )\r
-\r
- portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle pxMutex )\r
- {\r
- portBASE_TYPE xReturn;\r
-\r
- configASSERT( pxMutex );\r
-\r
- /* If this is the task that holds the mutex then pxMutexHolder will not\r
- change outside of this task. If this task does not hold the mutex then\r
- pxMutexHolder can never coincidentally equal the tasks handle, and as\r
- this is the only condition we are interested in it does not matter if\r
- pxMutexHolder is accessed simultaneously by another task. Therefore no\r
- mutual exclusion is required to test the pxMutexHolder variable. */\r
- if( pxMutex->pxMutexHolder == xTaskGetCurrentTaskHandle() )\r
- {\r
- traceGIVE_MUTEX_RECURSIVE( pxMutex );\r
-\r
- /* uxRecursiveCallCount cannot be zero if pxMutexHolder is equal to\r
- the task handle, therefore no underflow check is required. Also,\r
- uxRecursiveCallCount is only modified by the mutex holder, and as\r
- there can only be one, no mutual exclusion is required to modify the\r
- uxRecursiveCallCount member. */\r
- ( pxMutex->uxRecursiveCallCount )--;\r
-\r
- /* Have we unwound the call count? */\r
- if( pxMutex->uxRecursiveCallCount == 0 )\r
- {\r
- /* Return the mutex. This will automatically unblock any other\r
- task that might be waiting to access the mutex. */\r
- xQueueGenericSend( pxMutex, NULL, queueMUTEX_GIVE_BLOCK_TIME, queueSEND_TO_BACK );\r
- }\r
-\r
- xReturn = pdPASS;\r
- }\r
- else\r
- {\r
- /* We cannot give the mutex because we are not the holder. */\r
- xReturn = pdFAIL;\r
-\r
- traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex );\r
- }\r
-\r
- return xReturn;\r
- }\r
-\r
-#endif /* configUSE_RECURSIVE_MUTEXES */\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_RECURSIVE_MUTEXES == 1\r
-\r
- portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle pxMutex, portTickType xBlockTime )\r
- {\r
- portBASE_TYPE xReturn;\r
-\r
- configASSERT( pxMutex );\r
-\r
- /* Comments regarding mutual exclusion as per those within\r
- xQueueGiveMutexRecursive(). */\r
-\r
- traceTAKE_MUTEX_RECURSIVE( pxMutex );\r
-\r
- if( pxMutex->pxMutexHolder == xTaskGetCurrentTaskHandle() )\r
- {\r
- ( pxMutex->uxRecursiveCallCount )++;\r
- xReturn = pdPASS;\r
- }\r
- else\r
- {\r
- xReturn = xQueueGenericReceive( pxMutex, NULL, xBlockTime, pdFALSE );\r
-\r
- /* pdPASS will only be returned if we successfully obtained the mutex,\r
- we may have blocked to reach here. */\r
- if( xReturn == pdPASS )\r
- {\r
- ( pxMutex->uxRecursiveCallCount )++;\r
- }\r
- else\r
- {\r
- traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex );\r
- }\r
- }\r
-\r
- return xReturn;\r
- }\r
-\r
-#endif /* configUSE_RECURSIVE_MUTEXES */\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_COUNTING_SEMAPHORES == 1\r
-\r
- xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount )\r
- {\r
- xQueueHandle pxHandle;\r
-\r
- pxHandle = xQueueGenericCreate( ( unsigned portBASE_TYPE ) uxCountValue, queueSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_COUNTING_SEMAPHORE );\r
-\r
- if( pxHandle != NULL )\r
- {\r
- pxHandle->uxMessagesWaiting = uxInitialCount;\r
-\r
- traceCREATE_COUNTING_SEMAPHORE();\r
- }\r
- else\r
- {\r
- traceCREATE_COUNTING_SEMAPHORE_FAILED();\r
- }\r
-\r
- configASSERT( pxHandle );\r
- return pxHandle;\r
- }\r
-\r
-#endif /* configUSE_COUNTING_SEMAPHORES */\r
-/*-----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xQueueGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition )\r
-{\r
-signed portBASE_TYPE xEntryTimeSet = pdFALSE;\r
-xTimeOutType xTimeOut;\r
-\r
- configASSERT( pxQueue );\r
- configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
-\r
- /* This function relaxes the coding standard somewhat to allow return\r
- statements within the function itself. This is done in the interest\r
- of execution time efficiency. */\r
- for( ;; )\r
- {\r
- taskENTER_CRITICAL();\r
- {\r
- /* Is there room on the queue now? To be running we must be\r
- the highest priority task wanting to access the queue. */\r
- if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
- {\r
- traceQUEUE_SEND( pxQueue );\r
- prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );\r
-\r
- /* If there was a task waiting for data to arrive on the\r
- queue then unblock it now. */\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
- {\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) == pdTRUE )\r
- {\r
- /* The unblocked task has a priority higher than\r
- our own so yield immediately. Yes it is ok to do\r
- this from within the critical section - the kernel\r
- takes care of that. */\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
-\r
- taskEXIT_CRITICAL();\r
-\r
- /* Return to the original privilege level before exiting the\r
- function. */\r
- return pdPASS;\r
- }\r
- else\r
- {\r
- if( xTicksToWait == ( portTickType ) 0 )\r
- {\r
- /* The queue was full and no block time is specified (or\r
- the block time has expired) so leave now. */\r
- taskEXIT_CRITICAL();\r
-\r
- /* Return to the original privilege level before exiting\r
- the function. */\r
- traceQUEUE_SEND_FAILED( pxQueue );\r
- return errQUEUE_FULL;\r
- }\r
- else if( xEntryTimeSet == pdFALSE )\r
- {\r
- /* The queue was full and a block time was specified so\r
- configure the timeout structure. */\r
- vTaskSetTimeOutState( &xTimeOut );\r
- xEntryTimeSet = pdTRUE;\r
- }\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- /* Interrupts and other tasks can send to and receive from the queue\r
- now the critical section has been exited. */\r
-\r
- vTaskSuspendAll();\r
- prvLockQueue( pxQueue );\r
-\r
- /* Update the timeout state to see if it has expired yet. */\r
- if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )\r
- {\r
- if( prvIsQueueFull( pxQueue ) != pdFALSE )\r
- {\r
- traceBLOCKING_ON_QUEUE_SEND( pxQueue );\r
- vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );\r
-\r
- /* Unlocking the queue means queue events can effect the\r
- event list. It is possible that interrupts occurring now\r
- remove this task from the event list again - but as the\r
- scheduler is suspended the task will go onto the pending\r
- ready last instead of the actual ready list. */\r
- prvUnlockQueue( pxQueue );\r
-\r
- /* Resuming the scheduler will move tasks from the pending\r
- ready list into the ready list - so it is feasible that this\r
- task is already in a ready list before it yields - in which\r
- case the yield will not cause a context switch unless there\r
- is also a higher priority task in the pending ready list. */\r
- if( xTaskResumeAll() == pdFALSE )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- else\r
- {\r
- /* Try again. */\r
- prvUnlockQueue( pxQueue );\r
- ( void ) xTaskResumeAll();\r
- }\r
- }\r
- else\r
- {\r
- /* The timeout has expired. */\r
- prvUnlockQueue( pxQueue );\r
- ( void ) xTaskResumeAll();\r
-\r
- /* Return to the original privilege level before exiting the\r
- function. */\r
- traceQUEUE_SEND_FAILED( pxQueue );\r
- return errQUEUE_FULL;\r
- }\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_ALTERNATIVE_API == 1\r
-\r
- signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition )\r
- {\r
- signed portBASE_TYPE xEntryTimeSet = pdFALSE;\r
- xTimeOutType xTimeOut;\r
-\r
- configASSERT( pxQueue );\r
- configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
-\r
- for( ;; )\r
- {\r
- taskENTER_CRITICAL();\r
- {\r
- /* Is there room on the queue now? To be running we must be\r
- the highest priority task wanting to access the queue. */\r
- if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
- {\r
- traceQUEUE_SEND( pxQueue );\r
- prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );\r
-\r
- /* If there was a task waiting for data to arrive on the\r
- queue then unblock it now. */\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
- {\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) == pdTRUE )\r
- {\r
- /* The unblocked task has a priority higher than\r
- our own so yield immediately. */\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
-\r
- taskEXIT_CRITICAL();\r
- return pdPASS;\r
- }\r
- else\r
- {\r
- if( xTicksToWait == ( portTickType ) 0 )\r
- {\r
- taskEXIT_CRITICAL();\r
- return errQUEUE_FULL;\r
- }\r
- else if( xEntryTimeSet == pdFALSE )\r
- {\r
- vTaskSetTimeOutState( &xTimeOut );\r
- xEntryTimeSet = pdTRUE;\r
- }\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )\r
- {\r
- if( prvIsQueueFull( pxQueue ) != pdFALSE )\r
- {\r
- traceBLOCKING_ON_QUEUE_SEND( pxQueue );\r
- vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- else\r
- {\r
- taskEXIT_CRITICAL();\r
- traceQUEUE_SEND_FAILED( pxQueue );\r
- return errQUEUE_FULL;\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
- }\r
- }\r
-\r
-#endif /* configUSE_ALTERNATIVE_API */\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_ALTERNATIVE_API == 1\r
-\r
- signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking )\r
- {\r
- signed portBASE_TYPE xEntryTimeSet = pdFALSE;\r
- xTimeOutType xTimeOut;\r
- signed char *pcOriginalReadPosition;\r
-\r
- configASSERT( pxQueue );\r
- configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
-\r
- for( ;; )\r
- {\r
- taskENTER_CRITICAL();\r
- {\r
- if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
- {\r
- /* Remember our read position in case we are just peeking. */\r
- pcOriginalReadPosition = pxQueue->pcReadFrom;\r
-\r
- prvCopyDataFromQueue( pxQueue, pvBuffer );\r
-\r
- if( xJustPeeking == pdFALSE )\r
- {\r
- traceQUEUE_RECEIVE( pxQueue );\r
-\r
- /* We are actually removing data. */\r
- --( pxQueue->uxMessagesWaiting );\r
-\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
- {\r
- /* Record the information required to implement\r
- priority inheritance should it become necessary. */\r
- pxQueue->pxMutexHolder = xTaskGetCurrentTaskHandle();\r
- }\r
- }\r
- #endif\r
-\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
- {\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
- else\r
- {\r
- traceQUEUE_PEEK( pxQueue );\r
-\r
- /* We are not removing the data, so reset our read\r
- pointer. */\r
- pxQueue->pcReadFrom = pcOriginalReadPosition;\r
-\r
- /* The data is being left in the queue, so see if there are\r
- any other tasks waiting for the data. */\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
- {\r
- /* Tasks that are removed from the event list will get added to\r
- the pending ready list as the scheduler is still suspended. */\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
- {\r
- /* The task waiting has a higher priority than this task. */\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
-\r
- }\r
-\r
- taskEXIT_CRITICAL();\r
- return pdPASS;\r
- }\r
- else\r
- {\r
- if( xTicksToWait == ( portTickType ) 0 )\r
- {\r
- taskEXIT_CRITICAL();\r
- traceQUEUE_RECEIVE_FAILED( pxQueue );\r
- return errQUEUE_EMPTY;\r
- }\r
- else if( xEntryTimeSet == pdFALSE )\r
- {\r
- vTaskSetTimeOutState( &xTimeOut );\r
- xEntryTimeSet = pdTRUE;\r
- }\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )\r
- {\r
- if( prvIsQueueEmpty( pxQueue ) != pdFALSE )\r
- {\r
- traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );\r
-\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
- {\r
- portENTER_CRITICAL();\r
- vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );\r
- portEXIT_CRITICAL();\r
- }\r
- }\r
- #endif\r
-\r
- vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- else\r
- {\r
- taskEXIT_CRITICAL();\r
- traceQUEUE_RECEIVE_FAILED( pxQueue );\r
- return errQUEUE_EMPTY;\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
- }\r
- }\r
-\r
-\r
-#endif /* configUSE_ALTERNATIVE_API */\r
-/*-----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-unsigned portBASE_TYPE uxSavedInterruptStatus;\r
-\r
- configASSERT( pxQueue );\r
- configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
-\r
- /* Similar to xQueueGenericSend, except we don't block if there is no room\r
- in the queue. Also we don't directly wake a task that was blocked on a\r
- queue read, instead we return a flag to say whether a context switch is\r
- required or not (i.e. has a task with a higher priority than us been woken\r
- by this post). */\r
- uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
- {\r
- if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
- {\r
- traceQUEUE_SEND_FROM_ISR( pxQueue );\r
-\r
- prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );\r
-\r
- /* If the queue is locked we do not alter the event list. This will\r
- be done when the queue is unlocked later. */\r
- if( pxQueue->xTxLock == queueUNLOCKED )\r
- {\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
- {\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
- {\r
- /* The task waiting has a higher priority so record that a\r
- context switch is required. */\r
- if( pxHigherPriorityTaskWoken != NULL )\r
- {\r
- *pxHigherPriorityTaskWoken = pdTRUE;\r
- }\r
- }\r
- }\r
- }\r
- else\r
- {\r
- /* Increment the lock count so the task that unlocks the queue\r
- knows that data was posted while it was locked. */\r
- ++( pxQueue->xTxLock );\r
- }\r
-\r
- xReturn = pdPASS;\r
- }\r
- else\r
- {\r
- traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );\r
- xReturn = errQUEUE_FULL;\r
- }\r
- }\r
- portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xQueueGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking )\r
-{\r
-signed portBASE_TYPE xEntryTimeSet = pdFALSE;\r
-xTimeOutType xTimeOut;\r
-signed char *pcOriginalReadPosition;\r
-\r
- configASSERT( pxQueue );\r
- configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
-\r
- /* This function relaxes the coding standard somewhat to allow return\r
- statements within the function itself. This is done in the interest\r
- of execution time efficiency. */\r
-\r
- for( ;; )\r
- {\r
- taskENTER_CRITICAL();\r
- {\r
- /* Is there data in the queue now? To be running we must be\r
- the highest priority task wanting to access the queue. */\r
- if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
- {\r
- /* Remember our read position in case we are just peeking. */\r
- pcOriginalReadPosition = pxQueue->pcReadFrom;\r
-\r
- prvCopyDataFromQueue( pxQueue, pvBuffer );\r
-\r
- if( xJustPeeking == pdFALSE )\r
- {\r
- traceQUEUE_RECEIVE( pxQueue );\r
-\r
- /* We are actually removing data. */\r
- --( pxQueue->uxMessagesWaiting );\r
-\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
- {\r
- /* Record the information required to implement\r
- priority inheritance should it become necessary. */\r
- pxQueue->pxMutexHolder = xTaskGetCurrentTaskHandle();\r
- }\r
- }\r
- #endif\r
-\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
- {\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
- else\r
- {\r
- traceQUEUE_PEEK( pxQueue );\r
-\r
- /* We are not removing the data, so reset our read\r
- pointer. */\r
- pxQueue->pcReadFrom = pcOriginalReadPosition;\r
-\r
- /* The data is being left in the queue, so see if there are\r
- any other tasks waiting for the data. */\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
- {\r
- /* Tasks that are removed from the event list will get added to\r
- the pending ready list as the scheduler is still suspended. */\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
- {\r
- /* The task waiting has a higher priority than this task. */\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
-\r
- taskEXIT_CRITICAL();\r
- return pdPASS;\r
- }\r
- else\r
- {\r
- if( xTicksToWait == ( portTickType ) 0 )\r
- {\r
- /* The queue was empty and no block time is specified (or\r
- the block time has expired) so leave now. */\r
- taskEXIT_CRITICAL();\r
- traceQUEUE_RECEIVE_FAILED( pxQueue );\r
- return errQUEUE_EMPTY;\r
- }\r
- else if( xEntryTimeSet == pdFALSE )\r
- {\r
- /* The queue was empty and a block time was specified so\r
- configure the timeout structure. */\r
- vTaskSetTimeOutState( &xTimeOut );\r
- xEntryTimeSet = pdTRUE;\r
- }\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- /* Interrupts and other tasks can send to and receive from the queue\r
- now the critical section has been exited. */\r
-\r
- vTaskSuspendAll();\r
- prvLockQueue( pxQueue );\r
-\r
- /* Update the timeout state to see if it has expired yet. */\r
- if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )\r
- {\r
- if( prvIsQueueEmpty( pxQueue ) != pdFALSE )\r
- {\r
- traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );\r
-\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
- {\r
- portENTER_CRITICAL();\r
- {\r
- vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );\r
- }\r
- portEXIT_CRITICAL();\r
- }\r
- }\r
- #endif\r
-\r
- vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );\r
- prvUnlockQueue( pxQueue );\r
- if( xTaskResumeAll() == pdFALSE )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- else\r
- {\r
- /* Try again. */\r
- prvUnlockQueue( pxQueue );\r
- ( void ) xTaskResumeAll();\r
- }\r
- }\r
- else\r
- {\r
- prvUnlockQueue( pxQueue );\r
- ( void ) xTaskResumeAll();\r
- traceQUEUE_RECEIVE_FAILED( pxQueue );\r
- return errQUEUE_EMPTY;\r
- }\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxHigherPriorityTaskWoken )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-unsigned portBASE_TYPE uxSavedInterruptStatus;\r
-\r
- configASSERT( pxQueue );\r
- configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
-\r
- uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
- {\r
- /* We cannot block from an ISR, so check there is data available. */\r
- if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
- {\r
- traceQUEUE_RECEIVE_FROM_ISR( pxQueue );\r
-\r
- prvCopyDataFromQueue( pxQueue, pvBuffer );\r
- --( pxQueue->uxMessagesWaiting );\r
-\r
- /* If the queue is locked we will not modify the event list. Instead\r
- we update the lock count so the task that unlocks the queue will know\r
- that an ISR has removed data while the queue was locked. */\r
- if( pxQueue->xRxLock == queueUNLOCKED )\r
- {\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
- {\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )\r
- {\r
- /* The task waiting has a higher priority than us so\r
- force a context switch. */\r
- if( pxHigherPriorityTaskWoken != NULL )\r
- {\r
- *pxHigherPriorityTaskWoken = pdTRUE;\r
- }\r
- }\r
- }\r
- }\r
- else\r
- {\r
- /* Increment the lock count so the task that unlocks the queue\r
- knows that data was removed while it was locked. */\r
- ++( pxQueue->xRxLock );\r
- }\r
-\r
- xReturn = pdPASS;\r
- }\r
- else\r
- {\r
- xReturn = pdFAIL;\r
- traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue );\r
- }\r
- }\r
- portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle pxQueue )\r
-{\r
-unsigned portBASE_TYPE uxReturn;\r
-\r
- configASSERT( pxQueue );\r
-\r
- taskENTER_CRITICAL();\r
- uxReturn = pxQueue->uxMessagesWaiting;\r
- taskEXIT_CRITICAL();\r
-\r
- return uxReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue )\r
-{\r
-unsigned portBASE_TYPE uxReturn;\r
-\r
- configASSERT( pxQueue );\r
-\r
- uxReturn = pxQueue->uxMessagesWaiting;\r
-\r
- return uxReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vQueueDelete( xQueueHandle pxQueue )\r
-{\r
- configASSERT( pxQueue );\r
-\r
- traceQUEUE_DELETE( pxQueue );\r
- vQueueUnregisterQueue( pxQueue );\r
- vPortFree( pxQueue->pcHead );\r
- vPortFree( pxQueue );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_TRACE_FACILITY == 1 )\r
-\r
- unsigned char ucQueueGetQueueNumber( xQueueHandle pxQueue )\r
- {\r
- return pxQueue->ucQueueNumber;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_TRACE_FACILITY == 1 )\r
-\r
- void vQueueSetQueueNumber( xQueueHandle pxQueue, unsigned char ucQueueNumber )\r
- {\r
- pxQueue->ucQueueNumber = ucQueueNumber;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_TRACE_FACILITY == 1 )\r
-\r
- unsigned char ucQueueGetQueueType( xQueueHandle pxQueue )\r
- {\r
- return pxQueue->ucQueueType;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvCopyDataToQueue( xQUEUE *pxQueue, const void *pvItemToQueue, portBASE_TYPE xPosition )\r
-{\r
- if( pxQueue->uxItemSize == ( unsigned portBASE_TYPE ) 0 )\r
- {\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
- {\r
- /* The mutex is no longer being held. */\r
- vTaskPriorityDisinherit( ( void * ) pxQueue->pxMutexHolder );\r
- pxQueue->pxMutexHolder = NULL;\r
- }\r
- }\r
- #endif\r
- }\r
- else if( xPosition == queueSEND_TO_BACK )\r
- {\r
- memcpy( ( void * ) pxQueue->pcWriteTo, pvItemToQueue, ( unsigned ) pxQueue->uxItemSize );\r
- pxQueue->pcWriteTo += pxQueue->uxItemSize;\r
- if( pxQueue->pcWriteTo >= pxQueue->pcTail )\r
- {\r
- pxQueue->pcWriteTo = pxQueue->pcHead;\r
- }\r
- }\r
- else\r
- {\r
- memcpy( ( void * ) pxQueue->pcReadFrom, pvItemToQueue, ( unsigned ) pxQueue->uxItemSize );\r
- pxQueue->pcReadFrom -= pxQueue->uxItemSize;\r
- if( pxQueue->pcReadFrom < pxQueue->pcHead )\r
- {\r
- pxQueue->pcReadFrom = ( pxQueue->pcTail - pxQueue->uxItemSize );\r
- }\r
- }\r
-\r
- ++( pxQueue->uxMessagesWaiting );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvCopyDataFromQueue( xQUEUE * const pxQueue, const void *pvBuffer )\r
-{\r
- if( pxQueue->uxQueueType != queueQUEUE_IS_MUTEX )\r
- {\r
- pxQueue->pcReadFrom += pxQueue->uxItemSize;\r
- if( pxQueue->pcReadFrom >= pxQueue->pcTail )\r
- {\r
- pxQueue->pcReadFrom = pxQueue->pcHead;\r
- }\r
- memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvUnlockQueue( xQueueHandle pxQueue )\r
-{\r
- /* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. */\r
-\r
- /* The lock counts contains the number of extra data items placed or\r
- removed from the queue while the queue was locked. When a queue is\r
- locked items can be added or removed, but the event lists cannot be\r
- updated. */\r
- taskENTER_CRITICAL();\r
- {\r
- /* See if data was added to the queue while it was locked. */\r
- while( pxQueue->xTxLock > queueLOCKED_UNMODIFIED )\r
- {\r
- /* Data was posted while the queue was locked. Are any tasks\r
- blocked waiting for data to become available? */\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
- {\r
- /* Tasks that are removed from the event list will get added to\r
- the pending ready list as the scheduler is still suspended. */\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
- {\r
- /* The task waiting has a higher priority so record that a\r
- context switch is required. */\r
- vTaskMissedYield();\r
- }\r
-\r
- --( pxQueue->xTxLock );\r
- }\r
- else\r
- {\r
- break;\r
- }\r
- }\r
-\r
- pxQueue->xTxLock = queueUNLOCKED;\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- /* Do the same for the Rx lock. */\r
- taskENTER_CRITICAL();\r
- {\r
- while( pxQueue->xRxLock > queueLOCKED_UNMODIFIED )\r
- {\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
- {\r
- if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )\r
- {\r
- vTaskMissedYield();\r
- }\r
-\r
- --( pxQueue->xRxLock );\r
- }\r
- else\r
- {\r
- break;\r
- }\r
- }\r
-\r
- pxQueue->xRxLock = queueUNLOCKED;\r
- }\r
- taskEXIT_CRITICAL();\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static signed portBASE_TYPE prvIsQueueEmpty( const xQueueHandle pxQueue )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-\r
- taskENTER_CRITICAL();\r
- xReturn = ( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 );\r
- taskEXIT_CRITICAL();\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-\r
- configASSERT( pxQueue );\r
- xReturn = ( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 );\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static signed portBASE_TYPE prvIsQueueFull( const xQueueHandle pxQueue )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-\r
- taskENTER_CRITICAL();\r
- xReturn = ( pxQueue->uxMessagesWaiting == pxQueue->uxLength );\r
- taskEXIT_CRITICAL();\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-\r
- configASSERT( pxQueue );\r
- xReturn = ( pxQueue->uxMessagesWaiting == pxQueue->uxLength );\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_CO_ROUTINES == 1\r
-signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-\r
- /* If the queue is already full we may have to block. A critical section\r
- is required to prevent an interrupt removing something from the queue\r
- between the check to see if the queue is full and blocking on the queue. */\r
- portDISABLE_INTERRUPTS();\r
- {\r
- if( prvIsQueueFull( pxQueue ) != pdFALSE )\r
- {\r
- /* The queue is full - do we want to block or just leave without\r
- posting? */\r
- if( xTicksToWait > ( portTickType ) 0 )\r
- {\r
- /* As this is called from a coroutine we cannot block directly, but\r
- return indicating that we need to block. */\r
- vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToSend ) );\r
- portENABLE_INTERRUPTS();\r
- return errQUEUE_BLOCKED;\r
- }\r
- else\r
- {\r
- portENABLE_INTERRUPTS();\r
- return errQUEUE_FULL;\r
- }\r
- }\r
- }\r
- portENABLE_INTERRUPTS();\r
-\r
- portNOP();\r
-\r
- portDISABLE_INTERRUPTS();\r
- {\r
- if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
- {\r
- /* There is room in the queue, copy the data into the queue. */\r
- prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );\r
- xReturn = pdPASS;\r
-\r
- /* Were any co-routines waiting for data to become available? */\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
- {\r
- /* In this instance the co-routine could be placed directly\r
- into the ready list as we are within a critical section.\r
- Instead the same pending ready list mechanism is used as if\r
- the event were caused from within an interrupt. */\r
- if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
- {\r
- /* The co-routine waiting has a higher priority so record\r
- that a yield might be appropriate. */\r
- xReturn = errQUEUE_YIELD;\r
- }\r
- }\r
- }\r
- else\r
- {\r
- xReturn = errQUEUE_FULL;\r
- }\r
- }\r
- portENABLE_INTERRUPTS();\r
-\r
- return xReturn;\r
-}\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_CO_ROUTINES == 1\r
-signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-\r
- /* If the queue is already empty we may have to block. A critical section\r
- is required to prevent an interrupt adding something to the queue\r
- between the check to see if the queue is empty and blocking on the queue. */\r
- portDISABLE_INTERRUPTS();\r
- {\r
- if( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 )\r
- {\r
- /* There are no messages in the queue, do we want to block or just\r
- leave with nothing? */\r
- if( xTicksToWait > ( portTickType ) 0 )\r
- {\r
- /* As this is a co-routine we cannot block directly, but return\r
- indicating that we need to block. */\r
- vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToReceive ) );\r
- portENABLE_INTERRUPTS();\r
- return errQUEUE_BLOCKED;\r
- }\r
- else\r
- {\r
- portENABLE_INTERRUPTS();\r
- return errQUEUE_FULL;\r
- }\r
- }\r
- }\r
- portENABLE_INTERRUPTS();\r
-\r
- portNOP();\r
-\r
- portDISABLE_INTERRUPTS();\r
- {\r
- if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
- {\r
- /* Data is available from the queue. */\r
- pxQueue->pcReadFrom += pxQueue->uxItemSize;\r
- if( pxQueue->pcReadFrom >= pxQueue->pcTail )\r
- {\r
- pxQueue->pcReadFrom = pxQueue->pcHead;\r
- }\r
- --( pxQueue->uxMessagesWaiting );\r
- memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );\r
-\r
- xReturn = pdPASS;\r
-\r
- /* Were any co-routines waiting for space to become available? */\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
- {\r
- /* In this instance the co-routine could be placed directly\r
- into the ready list as we are within a critical section.\r
- Instead the same pending ready list mechanism is used as if\r
- the event were caused from within an interrupt. */\r
- if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )\r
- {\r
- xReturn = errQUEUE_YIELD;\r
- }\r
- }\r
- }\r
- else\r
- {\r
- xReturn = pdFAIL;\r
- }\r
- }\r
- portENABLE_INTERRUPTS();\r
-\r
- return xReturn;\r
-}\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-\r
-\r
-#if configUSE_CO_ROUTINES == 1\r
-signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken )\r
-{\r
- /* Cannot block within an ISR so if there is no space on the queue then\r
- exit without doing anything. */\r
- if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
- {\r
- prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );\r
-\r
- /* We only want to wake one co-routine per ISR, so check that a\r
- co-routine has not already been woken. */\r
- if( xCoRoutinePreviouslyWoken == pdFALSE )\r
- {\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
- {\r
- if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
- {\r
- return pdTRUE;\r
- }\r
- }\r
- }\r
- }\r
-\r
- return xCoRoutinePreviouslyWoken;\r
-}\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_CO_ROUTINES == 1\r
-signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxCoRoutineWoken )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-\r
- /* We cannot block from an ISR, so check there is data available. If\r
- not then just leave without doing anything. */\r
- if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
- {\r
- /* Copy the data from the queue. */\r
- pxQueue->pcReadFrom += pxQueue->uxItemSize;\r
- if( pxQueue->pcReadFrom >= pxQueue->pcTail )\r
- {\r
- pxQueue->pcReadFrom = pxQueue->pcHead;\r
- }\r
- --( pxQueue->uxMessagesWaiting );\r
- memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );\r
-\r
- if( ( *pxCoRoutineWoken ) == pdFALSE )\r
- {\r
- if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
- {\r
- if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )\r
- {\r
- *pxCoRoutineWoken = pdTRUE;\r
- }\r
- }\r
- }\r
-\r
- xReturn = pdPASS;\r
- }\r
- else\r
- {\r
- xReturn = pdFAIL;\r
- }\r
-\r
- return xReturn;\r
-}\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configQUEUE_REGISTRY_SIZE > 0\r
-\r
- void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcQueueName )\r
- {\r
- unsigned portBASE_TYPE ux;\r
-\r
- /* See if there is an empty space in the registry. A NULL name denotes\r
- a free slot. */\r
- for( ux = ( unsigned portBASE_TYPE ) 0U; ux < ( unsigned portBASE_TYPE ) configQUEUE_REGISTRY_SIZE; ux++ )\r
- {\r
- if( xQueueRegistry[ ux ].pcQueueName == NULL )\r
- {\r
- /* Store the information on this queue. */\r
- xQueueRegistry[ ux ].pcQueueName = pcQueueName;\r
- xQueueRegistry[ ux ].xHandle = xQueue;\r
- break;\r
- }\r
- }\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configQUEUE_REGISTRY_SIZE > 0\r
-\r
- static void vQueueUnregisterQueue( xQueueHandle xQueue )\r
- {\r
- unsigned portBASE_TYPE ux;\r
-\r
- /* See if the handle of the queue being unregistered in actually in the\r
- registry. */\r
- for( ux = ( unsigned portBASE_TYPE ) 0U; ux < ( unsigned portBASE_TYPE ) configQUEUE_REGISTRY_SIZE; ux++ )\r
- {\r
- if( xQueueRegistry[ ux ].xHandle == xQueue )\r
- {\r
- /* Set the name to NULL to show that this slot if free again. */\r
- xQueueRegistry[ ux ].pcQueueName = NULL;\r
- break;\r
- }\r
- }\r
-\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_TIMERS == 1\r
-\r
- void vQueueWaitForMessageRestricted( xQueueHandle pxQueue, portTickType xTicksToWait )\r
- {\r
- /* This function should not be called by application code hence the\r
- 'Restricted' in its name. It is not part of the public API. It is\r
- designed for use by kernel code, and has special calling requirements.\r
- It can result in vListInsert() being called on a list that can only\r
- possibly ever have one item in it, so the list will be fast, but even\r
- so it should be called with the scheduler locked and not from a critical\r
- section. */\r
-\r
- /* Only do anything if there are no messages in the queue. This function\r
- will not actually cause the task to block, just place it on a blocked\r
- list. It will not block until the scheduler is unlocked - at which\r
- time a yield will be performed. If an item is added to the queue while\r
- the queue is locked, and the calling task blocks on the queue, then the\r
- calling task will be immediately unblocked when the queue is unlocked. */\r
- prvLockQueue( pxQueue );\r
- if( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0U )\r
- {\r
- /* There is nothing in the queue, block for the specified period. */\r
- vTaskPlaceOnEventListRestricted( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );\r
- }\r
- prvUnlockQueue( pxQueue );\r
- }\r
-\r
-#endif\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
- \r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-\r
-#include <stdio.h>\r
-#include <stdlib.h>\r
-#include <string.h>\r
-\r
-/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining\r
-all the API functions to use the MPU wrappers. That should only be done when\r
-task.h is included from an application file. */\r
-#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
-#include "FreeRTOS.h"\r
-#include "task.h"\r
-#include "timers.h"\r
-#include "StackMacros.h"\r
-\r
-#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
-/*\r
- * Macro to define the amount of stack available to the idle task.\r
- */\r
-#define tskIDLE_STACK_SIZE configMINIMAL_STACK_SIZE\r
-\r
-/*\r
- * Task control block. A task control block (TCB) is allocated to each task,\r
- * and stores the context of the task.\r
- */\r
-typedef struct tskTaskControlBlock\r
-{\r
- volatile portSTACK_TYPE *pxTopOfStack; /*< Points to the location of the last item placed on the tasks stack. THIS MUST BE THE FIRST MEMBER OF THE STRUCT. */\r
-\r
- #if ( portUSING_MPU_WRAPPERS == 1 )\r
- xMPU_SETTINGS xMPUSettings; /*< The MPU settings are defined as part of the port layer. THIS MUST BE THE SECOND MEMBER OF THE STRUCT. */\r
- #endif \r
- \r
- xListItem xGenericListItem; /*< List item used to place the TCB in ready and blocked queues. */\r
- xListItem xEventListItem; /*< List item used to place the TCB in event lists. */\r
- unsigned portBASE_TYPE uxPriority; /*< The priority of the task where 0 is the lowest priority. */\r
- portSTACK_TYPE *pxStack; /*< Points to the start of the stack. */\r
- signed char pcTaskName[ configMAX_TASK_NAME_LEN ];/*< Descriptive name given to the task when created. Facilitates debugging only. */\r
-\r
- #if ( portSTACK_GROWTH > 0 )\r
- portSTACK_TYPE *pxEndOfStack; /*< Used for stack overflow checking on architectures where the stack grows up from low memory. */\r
- #endif\r
-\r
- #if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
- unsigned portBASE_TYPE uxCriticalNesting;\r
- #endif\r
-\r
- #if ( configUSE_TRACE_FACILITY == 1 )\r
- unsigned portBASE_TYPE uxTCBNumber; /*< This stores a number that increments each time a TCB is created. It allows debuggers to determine when a task has been deleted and then recreated. */\r
- unsigned portBASE_TYPE uxTaskNumber; /*< This stores a number specifically for use by third party trace code. */\r
- #endif\r
-\r
- #if ( configUSE_MUTEXES == 1 )\r
- unsigned portBASE_TYPE uxBasePriority; /*< The priority last assigned to the task - used by the priority inheritance mechanism. */\r
- #endif\r
-\r
- #if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
- pdTASK_HOOK_CODE pxTaskTag;\r
- #endif\r
-\r
- #if ( configGENERATE_RUN_TIME_STATS == 1 )\r
- unsigned long ulRunTimeCounter; /*< Used for calculating how much CPU time each task is utilising. */\r
- #endif\r
-\r
-} tskTCB;\r
-\r
-\r
-/*\r
- * Some kernel aware debuggers require data to be viewed to be global, rather\r
- * than file scope.\r
- */\r
-#ifdef portREMOVE_STATIC_QUALIFIER\r
- #define static\r
-#endif\r
-\r
-/*lint -e956 */\r
-PRIVILEGED_DATA tskTCB * volatile pxCurrentTCB = NULL;\r
-\r
-/* Lists for ready and blocked tasks. --------------------*/\r
-\r
-PRIVILEGED_DATA static xList pxReadyTasksLists[ configMAX_PRIORITIES ]; /*< Prioritised ready tasks. */\r
-PRIVILEGED_DATA static xList xDelayedTaskList1; /*< Delayed tasks. */\r
-PRIVILEGED_DATA static xList xDelayedTaskList2; /*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */\r
-PRIVILEGED_DATA static xList * volatile pxDelayedTaskList ; /*< Points to the delayed task list currently being used. */\r
-PRIVILEGED_DATA static xList * volatile pxOverflowDelayedTaskList; /*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */\r
-PRIVILEGED_DATA static xList xPendingReadyList; /*< Tasks that have been readied while the scheduler was suspended. They will be moved to the ready queue when the scheduler is resumed. */\r
-\r
-#if ( INCLUDE_vTaskDelete == 1 )\r
-\r
- PRIVILEGED_DATA static xList xTasksWaitingTermination; /*< Tasks that have been deleted - but the their memory not yet freed. */\r
- PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxTasksDeleted = ( unsigned portBASE_TYPE ) 0U;\r
-\r
-#endif\r
-\r
-#if ( INCLUDE_vTaskSuspend == 1 )\r
-\r
- PRIVILEGED_DATA static xList xSuspendedTaskList; /*< Tasks that are currently suspended. */\r
-\r
-#endif\r
-\r
-#if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )\r
- \r
- PRIVILEGED_DATA static xTaskHandle xIdleTaskHandle = NULL;\r
- \r
-#endif\r
-\r
-/* File private variables. --------------------------------*/\r
-PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxCurrentNumberOfTasks = ( unsigned portBASE_TYPE ) 0U;\r
-PRIVILEGED_DATA static volatile portTickType xTickCount = ( portTickType ) 0U;\r
-PRIVILEGED_DATA static unsigned portBASE_TYPE uxTopUsedPriority = tskIDLE_PRIORITY;\r
-PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxTopReadyPriority = tskIDLE_PRIORITY;\r
-PRIVILEGED_DATA static volatile signed portBASE_TYPE xSchedulerRunning = pdFALSE;\r
-PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxSchedulerSuspended = ( unsigned portBASE_TYPE ) pdFALSE;\r
-PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxMissedTicks = ( unsigned portBASE_TYPE ) 0U;\r
-PRIVILEGED_DATA static volatile portBASE_TYPE xMissedYield = ( portBASE_TYPE ) pdFALSE;\r
-PRIVILEGED_DATA static volatile portBASE_TYPE xNumOfOverflows = ( portBASE_TYPE ) 0;\r
-PRIVILEGED_DATA static unsigned portBASE_TYPE uxTaskNumber = ( unsigned portBASE_TYPE ) 0U;\r
-PRIVILEGED_DATA static portTickType xNextTaskUnblockTime = ( portTickType ) portMAX_DELAY;\r
-\r
-#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
-\r
- PRIVILEGED_DATA static char pcStatsString[ 50 ] ;\r
- PRIVILEGED_DATA static unsigned long ulTaskSwitchedInTime = 0UL; /*< Holds the value of a timer/counter the last time a task was switched in. */\r
- static void prvGenerateRunTimeStatsForTasksInList( const signed char *pcWriteBuffer, xList *pxList, unsigned long ulTotalRunTime ) PRIVILEGED_FUNCTION;\r
-\r
-#endif\r
-\r
-/* Debugging and trace facilities private variables and macros. ------------*/\r
-\r
-/*\r
- * The value used to fill the stack of a task when the task is created. This\r
- * is used purely for checking the high water mark for tasks.\r
- */\r
-#define tskSTACK_FILL_BYTE ( 0xa5U )\r
-\r
-/*\r
- * Macros used by vListTask to indicate which state a task is in.\r
- */\r
-#define tskBLOCKED_CHAR ( ( signed char ) 'B' )\r
-#define tskREADY_CHAR ( ( signed char ) 'R' )\r
-#define tskDELETED_CHAR ( ( signed char ) 'D' )\r
-#define tskSUSPENDED_CHAR ( ( signed char ) 'S' )\r
-\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * Place the task represented by pxTCB into the appropriate ready queue for\r
- * the task. It is inserted at the end of the list. One quirk of this is\r
- * that if the task being inserted is at the same priority as the currently\r
- * executing task, then it will only be rescheduled after the currently\r
- * executing task has been rescheduled.\r
- */\r
-#define prvAddTaskToReadyQueue( pxTCB ) \\r
- traceMOVED_TASK_TO_READY_STATE( pxTCB ) \\r
- if( ( pxTCB )->uxPriority > uxTopReadyPriority ) \\r
- { \\r
- uxTopReadyPriority = ( pxTCB )->uxPriority; \\r
- } \\r
- vListInsertEnd( ( xList * ) &( pxReadyTasksLists[ ( pxTCB )->uxPriority ] ), &( ( pxTCB )->xGenericListItem ) )\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * Macro that looks at the list of tasks that are currently delayed to see if\r
- * any require waking.\r
- *\r
- * Tasks are stored in the queue in the order of their wake time - meaning\r
- * once one tasks has been found whose timer has not expired we need not look\r
- * any further down the list.\r
- */\r
-#define prvCheckDelayedTasks() \\r
-{ \\r
-portTickType xItemValue; \\r
- \\r
- /* Is the tick count greater than or equal to the wake time of the first \\r
- task referenced from the delayed tasks list? */ \\r
- if( xTickCount >= xNextTaskUnblockTime ) \\r
- { \\r
- for( ;; ) \\r
- { \\r
- if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE ) \\r
- { \\r
- /* The delayed list is empty. Set xNextTaskUnblockTime to the \\r
- maximum possible value so it is extremely unlikely that the \\r
- if( xTickCount >= xNextTaskUnblockTime ) test will pass next \\r
- time through. */ \\r
- xNextTaskUnblockTime = portMAX_DELAY; \\r
- break; \\r
- } \\r
- else \\r
- { \\r
- /* The delayed list is not empty, get the value of the item at \\r
- the head of the delayed list. This is the time at which the \\r
- task at the head of the delayed list should be removed from \\r
- the Blocked state. */ \\r
- pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList ); \\r
- xItemValue = listGET_LIST_ITEM_VALUE( &( pxTCB->xGenericListItem ) ); \\r
- \\r
- if( xTickCount < xItemValue ) \\r
- { \\r
- /* It is not time to unblock this item yet, but the item \\r
- value is the time at which the task at the head of the \\r
- blocked list should be removed from the Blocked state - \\r
- so record the item value in xNextTaskUnblockTime. */ \\r
- xNextTaskUnblockTime = xItemValue; \\r
- break; \\r
- } \\r
- \\r
- /* It is time to remove the item from the Blocked state. */ \\r
- vListRemove( &( pxTCB->xGenericListItem ) ); \\r
- \\r
- /* Is the task waiting on an event also? */ \\r
- if( pxTCB->xEventListItem.pvContainer != NULL ) \\r
- { \\r
- vListRemove( &( pxTCB->xEventListItem ) ); \\r
- } \\r
- prvAddTaskToReadyQueue( pxTCB ); \\r
- } \\r
- } \\r
- } \\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * Several functions take an xTaskHandle parameter that can optionally be NULL,\r
- * where NULL is used to indicate that the handle of the currently executing\r
- * task should be used in place of the parameter. This macro simply checks to\r
- * see if the parameter is NULL and returns a pointer to the appropriate TCB.\r
- */\r
-#define prvGetTCBFromHandle( pxHandle ) ( ( ( pxHandle ) == NULL ) ? ( tskTCB * ) pxCurrentTCB : ( tskTCB * ) ( pxHandle ) )\r
-\r
-/* Callback function prototypes. --------------------------*/\r
-extern void vApplicationStackOverflowHook( xTaskHandle pxTask, signed char *pcTaskName );\r
-extern void vApplicationTickHook( void );\r
- \r
-/* File private functions. --------------------------------*/\r
-\r
-/*\r
- * Utility to ready a TCB for a given task. Mainly just copies the parameters\r
- * into the TCB structure.\r
- */\r
-static void prvInitialiseTCBVariables( tskTCB *pxTCB, const signed char * const pcName, unsigned portBASE_TYPE uxPriority, const xMemoryRegion * const xRegions, unsigned short usStackDepth ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Utility to ready all the lists used by the scheduler. This is called\r
- * automatically upon the creation of the first task.\r
- */\r
-static void prvInitialiseTaskLists( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * The idle task, which as all tasks is implemented as a never ending loop.\r
- * The idle task is automatically created and added to the ready lists upon\r
- * creation of the first user task.\r
- *\r
- * The portTASK_FUNCTION_PROTO() macro is used to allow port/compiler specific\r
- * language extensions. The equivalent prototype for this function is:\r
- *\r
- * void prvIdleTask( void *pvParameters );\r
- *\r
- */\r
-static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );\r
-\r
-/*\r
- * Utility to free all memory allocated by the scheduler to hold a TCB,\r
- * including the stack pointed to by the TCB.\r
- *\r
- * This does not free memory allocated by the task itself (i.e. memory\r
- * allocated by calls to pvPortMalloc from within the tasks application code).\r
- */\r
-#if ( INCLUDE_vTaskDelete == 1 )\r
-\r
- static void prvDeleteTCB( tskTCB *pxTCB ) PRIVILEGED_FUNCTION;\r
-\r
-#endif\r
-\r
-/*\r
- * Used only by the idle task. This checks to see if anything has been placed\r
- * in the list of tasks waiting to be deleted. If so the task is cleaned up\r
- * and its TCB deleted.\r
- */\r
-static void prvCheckTasksWaitingTermination( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * The currently executing task is entering the Blocked state. Add the task to\r
- * either the current or the overflow delayed task list.\r
- */\r
-static void prvAddCurrentTaskToDelayedList( portTickType xTimeToWake ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Allocates memory from the heap for a TCB and associated stack. Checks the\r
- * allocation was successful.\r
- */\r
-static tskTCB *prvAllocateTCBAndStack( unsigned short usStackDepth, portSTACK_TYPE *puxStackBuffer ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Called from vTaskList. vListTasks details all the tasks currently under\r
- * control of the scheduler. The tasks may be in one of a number of lists.\r
- * prvListTaskWithinSingleList accepts a list and details the tasks from\r
- * within just that list.\r
- *\r
- * THIS FUNCTION IS INTENDED FOR DEBUGGING ONLY, AND SHOULD NOT BE CALLED FROM\r
- * NORMAL APPLICATION CODE.\r
- */\r
-#if ( configUSE_TRACE_FACILITY == 1 )\r
-\r
- static void prvListTaskWithinSingleList( const signed char *pcWriteBuffer, xList *pxList, signed char cStatus ) PRIVILEGED_FUNCTION;\r
-\r
-#endif\r
-\r
-/*\r
- * When a task is created, the stack of the task is filled with a known value.\r
- * This function determines the 'high water mark' of the task stack by\r
- * determining how much of the stack remains at the original preset value.\r
- */\r
-#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
-\r
- static unsigned short usTaskCheckFreeStackSpace( const unsigned char * pucStackByte ) PRIVILEGED_FUNCTION;\r
-\r
-#endif\r
-\r
-\r
-/*lint +e956 */\r
-\r
-\r
-\r
-/*-----------------------------------------------------------\r
- * TASK CREATION API documented in task.h\r
- *----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xTaskGenericCreate( pdTASK_CODE pxTaskCode, const signed char * const pcName, unsigned short usStackDepth, void *pvParameters, unsigned portBASE_TYPE uxPriority, xTaskHandle *pxCreatedTask, portSTACK_TYPE *puxStackBuffer, const xMemoryRegion * const xRegions )\r
-{\r
-signed portBASE_TYPE xReturn;\r
-tskTCB * pxNewTCB;\r
-\r
- configASSERT( pxTaskCode );\r
- configASSERT( ( uxPriority < configMAX_PRIORITIES ) );\r
-\r
- /* Allocate the memory required by the TCB and stack for the new task,\r
- checking that the allocation was successful. */\r
- pxNewTCB = prvAllocateTCBAndStack( usStackDepth, puxStackBuffer );\r
-\r
- if( pxNewTCB != NULL )\r
- {\r
- portSTACK_TYPE *pxTopOfStack;\r
-\r
- #if( portUSING_MPU_WRAPPERS == 1 )\r
- /* Should the task be created in privileged mode? */\r
- portBASE_TYPE xRunPrivileged;\r
- if( ( uxPriority & portPRIVILEGE_BIT ) != 0U )\r
- {\r
- xRunPrivileged = pdTRUE;\r
- }\r
- else\r
- {\r
- xRunPrivileged = pdFALSE;\r
- }\r
- uxPriority &= ~portPRIVILEGE_BIT;\r
- #endif /* portUSING_MPU_WRAPPERS == 1 */\r
-\r
- /* Calculate the top of stack address. This depends on whether the\r
- stack grows from high memory to low (as per the 80x86) or visa versa.\r
- portSTACK_GROWTH is used to make the result positive or negative as\r
- required by the port. */\r
- #if( portSTACK_GROWTH < 0 )\r
- {\r
- pxTopOfStack = pxNewTCB->pxStack + ( usStackDepth - ( unsigned short ) 1 );\r
- pxTopOfStack = ( portSTACK_TYPE * ) ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack ) & ( ( portPOINTER_SIZE_TYPE ) ~portBYTE_ALIGNMENT_MASK ) );\r
-\r
- /* Check the alignment of the calculated top of stack is correct. */\r
- configASSERT( ( ( ( unsigned long ) pxTopOfStack & ( unsigned long ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
- }\r
- #else\r
- {\r
- pxTopOfStack = pxNewTCB->pxStack;\r
- \r
- /* Check the alignment of the stack buffer is correct. */\r
- configASSERT( ( ( ( unsigned long ) pxNewTCB->pxStack & ( unsigned long ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
-\r
- /* If we want to use stack checking on architectures that use\r
- a positive stack growth direction then we also need to store the\r
- other extreme of the stack space. */\r
- pxNewTCB->pxEndOfStack = pxNewTCB->pxStack + ( usStackDepth - 1 );\r
- }\r
- #endif\r
-\r
- /* Setup the newly allocated TCB with the initial state of the task. */\r
- prvInitialiseTCBVariables( pxNewTCB, pcName, uxPriority, xRegions, usStackDepth );\r
-\r
- /* Initialize the TCB stack to look as if the task was already running,\r
- but had been interrupted by the scheduler. The return address is set\r
- to the start of the task function. Once the stack has been initialised\r
- the top of stack variable is updated. */\r
- #if( portUSING_MPU_WRAPPERS == 1 )\r
- {\r
- pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );\r
- }\r
- #else\r
- {\r
- pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );\r
- }\r
- #endif\r
-\r
- /* Check the alignment of the initialised stack. */\r
- portALIGNMENT_ASSERT_pxCurrentTCB( ( ( ( unsigned long ) pxNewTCB->pxTopOfStack & ( unsigned long ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
-\r
- if( ( void * ) pxCreatedTask != NULL )\r
- {\r
- /* Pass the TCB out - in an anonymous way. The calling function/\r
- task can use this as a handle to delete the task later if\r
- required.*/\r
- *pxCreatedTask = ( xTaskHandle ) pxNewTCB;\r
- }\r
- \r
- /* We are going to manipulate the task queues to add this task to a\r
- ready list, so must make sure no interrupts occur. */\r
- taskENTER_CRITICAL();\r
- {\r
- uxCurrentNumberOfTasks++;\r
- if( pxCurrentTCB == NULL )\r
- {\r
- /* There are no other tasks, or all the other tasks are in\r
- the suspended state - make this the current task. */\r
- pxCurrentTCB = pxNewTCB;\r
-\r
- if( uxCurrentNumberOfTasks == ( unsigned portBASE_TYPE ) 1 )\r
- {\r
- /* This is the first task to be created so do the preliminary\r
- initialisation required. We will not recover if this call\r
- fails, but we will report the failure. */\r
- prvInitialiseTaskLists();\r
- }\r
- }\r
- else\r
- {\r
- /* If the scheduler is not already running, make this task the\r
- current task if it is the highest priority task to be created\r
- so far. */\r
- if( xSchedulerRunning == pdFALSE )\r
- {\r
- if( pxCurrentTCB->uxPriority <= uxPriority )\r
- {\r
- pxCurrentTCB = pxNewTCB;\r
- }\r
- }\r
- }\r
-\r
- /* Remember the top priority to make context switching faster. Use\r
- the priority in pxNewTCB as this has been capped to a valid value. */\r
- if( pxNewTCB->uxPriority > uxTopUsedPriority )\r
- {\r
- uxTopUsedPriority = pxNewTCB->uxPriority;\r
- }\r
-\r
- #if ( configUSE_TRACE_FACILITY == 1 )\r
- {\r
- /* Add a counter into the TCB for tracing only. */\r
- pxNewTCB->uxTCBNumber = uxTaskNumber;\r
- }\r
- #endif\r
- uxTaskNumber++;\r
-\r
- prvAddTaskToReadyQueue( pxNewTCB );\r
-\r
- xReturn = pdPASS;\r
- portSETUP_TCB( pxNewTCB );\r
- traceTASK_CREATE( pxNewTCB );\r
- }\r
- taskEXIT_CRITICAL();\r
- }\r
- else\r
- {\r
- xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;\r
- traceTASK_CREATE_FAILED();\r
- }\r
-\r
- if( xReturn == pdPASS )\r
- {\r
- if( xSchedulerRunning != pdFALSE )\r
- {\r
- /* If the created task is of a higher priority than the current task\r
- then it should run now. */\r
- if( pxCurrentTCB->uxPriority < uxPriority )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_vTaskDelete == 1 )\r
-\r
- void vTaskDelete( xTaskHandle pxTaskToDelete )\r
- {\r
- tskTCB *pxTCB;\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- /* Ensure a yield is performed if the current task is being\r
- deleted. */\r
- if( pxTaskToDelete == pxCurrentTCB )\r
- {\r
- pxTaskToDelete = NULL;\r
- }\r
-\r
- /* If null is passed in here then we are deleting ourselves. */\r
- pxTCB = prvGetTCBFromHandle( pxTaskToDelete );\r
-\r
- /* Remove task from the ready list and place in the termination list.\r
- This will stop the task from be scheduled. The idle task will check\r
- the termination list and free up any memory allocated by the\r
- scheduler for the TCB and stack. */\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
-\r
- /* Is the task waiting on an event also? */\r
- if( pxTCB->xEventListItem.pvContainer != NULL )\r
- {\r
- vListRemove( &( pxTCB->xEventListItem ) );\r
- }\r
-\r
- vListInsertEnd( ( xList * ) &xTasksWaitingTermination, &( pxTCB->xGenericListItem ) );\r
-\r
- /* Increment the ucTasksDeleted variable so the idle task knows\r
- there is a task that has been deleted and that it should therefore\r
- check the xTasksWaitingTermination list. */\r
- ++uxTasksDeleted;\r
-\r
- /* Increment the uxTaskNumberVariable also so kernel aware debuggers\r
- can detect that the task lists need re-generating. */\r
- uxTaskNumber++;\r
-\r
- traceTASK_DELETE( pxTCB );\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- /* Force a reschedule if we have just deleted the current task. */\r
- if( xSchedulerRunning != pdFALSE )\r
- {\r
- if( ( void * ) pxTaskToDelete == NULL )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
-\r
-#endif\r
-\r
-\r
-\r
-\r
-\r
-\r
-/*-----------------------------------------------------------\r
- * TASK CONTROL API documented in task.h\r
- *----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_vTaskDelayUntil == 1 )\r
-\r
- void vTaskDelayUntil( portTickType * const pxPreviousWakeTime, portTickType xTimeIncrement )\r
- {\r
- portTickType xTimeToWake;\r
- portBASE_TYPE xAlreadyYielded, xShouldDelay = pdFALSE;\r
-\r
- configASSERT( pxPreviousWakeTime );\r
- configASSERT( ( xTimeIncrement > 0U ) );\r
-\r
- vTaskSuspendAll();\r
- {\r
- /* Generate the tick time at which the task wants to wake. */\r
- xTimeToWake = *pxPreviousWakeTime + xTimeIncrement;\r
-\r
- if( xTickCount < *pxPreviousWakeTime )\r
- {\r
- /* The tick count has overflowed since this function was\r
- lasted called. In this case the only time we should ever\r
- actually delay is if the wake time has also overflowed,\r
- and the wake time is greater than the tick time. When this\r
- is the case it is as if neither time had overflowed. */\r
- if( ( xTimeToWake < *pxPreviousWakeTime ) && ( xTimeToWake > xTickCount ) )\r
- {\r
- xShouldDelay = pdTRUE;\r
- }\r
- }\r
- else\r
- {\r
- /* The tick time has not overflowed. In this case we will\r
- delay if either the wake time has overflowed, and/or the\r
- tick time is less than the wake time. */\r
- if( ( xTimeToWake < *pxPreviousWakeTime ) || ( xTimeToWake > xTickCount ) )\r
- {\r
- xShouldDelay = pdTRUE;\r
- }\r
- }\r
-\r
- /* Update the wake time ready for the next call. */\r
- *pxPreviousWakeTime = xTimeToWake;\r
-\r
- if( xShouldDelay != pdFALSE )\r
- {\r
- traceTASK_DELAY_UNTIL();\r
-\r
- /* We must remove ourselves from the ready list before adding\r
- ourselves to the blocked list as the same list item is used for\r
- both lists. */\r
- vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
- prvAddCurrentTaskToDelayedList( xTimeToWake );\r
- }\r
- }\r
- xAlreadyYielded = xTaskResumeAll();\r
-\r
- /* Force a reschedule if xTaskResumeAll has not already done so, we may\r
- have put ourselves to sleep. */\r
- if( xAlreadyYielded == pdFALSE )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_vTaskDelay == 1 )\r
-\r
- void vTaskDelay( portTickType xTicksToDelay )\r
- {\r
- portTickType xTimeToWake;\r
- signed portBASE_TYPE xAlreadyYielded = pdFALSE;\r
-\r
- /* A delay time of zero just forces a reschedule. */\r
- if( xTicksToDelay > ( portTickType ) 0U )\r
- {\r
- vTaskSuspendAll();\r
- {\r
- traceTASK_DELAY();\r
-\r
- /* A task that is removed from the event list while the\r
- scheduler is suspended will not get placed in the ready\r
- list or removed from the blocked list until the scheduler\r
- is resumed.\r
-\r
- This task cannot be in an event list as it is the currently\r
- executing task. */\r
-\r
- /* Calculate the time to wake - this may overflow but this is\r
- not a problem. */\r
- xTimeToWake = xTickCount + xTicksToDelay;\r
-\r
- /* We must remove ourselves from the ready list before adding\r
- ourselves to the blocked list as the same list item is used for\r
- both lists. */\r
- vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
- prvAddCurrentTaskToDelayedList( xTimeToWake );\r
- }\r
- xAlreadyYielded = xTaskResumeAll();\r
- }\r
-\r
- /* Force a reschedule if xTaskResumeAll has not already done so, we may\r
- have put ourselves to sleep. */\r
- if( xAlreadyYielded == pdFALSE )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_uxTaskPriorityGet == 1 )\r
-\r
- unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask )\r
- {\r
- tskTCB *pxTCB;\r
- unsigned portBASE_TYPE uxReturn;\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- /* If null is passed in here then we are changing the\r
- priority of the calling function. */\r
- pxTCB = prvGetTCBFromHandle( pxTask );\r
- uxReturn = pxTCB->uxPriority;\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- return uxReturn;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_vTaskPrioritySet == 1 )\r
-\r
- void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority )\r
- {\r
- tskTCB *pxTCB;\r
- unsigned portBASE_TYPE uxCurrentPriority;\r
- portBASE_TYPE xYieldRequired = pdFALSE;\r
-\r
- configASSERT( ( uxNewPriority < configMAX_PRIORITIES ) );\r
-\r
- /* Ensure the new priority is valid. */\r
- if( uxNewPriority >= configMAX_PRIORITIES )\r
- {\r
- uxNewPriority = configMAX_PRIORITIES - ( unsigned portBASE_TYPE ) 1U;\r
- }\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- if( pxTask == pxCurrentTCB )\r
- {\r
- pxTask = NULL;\r
- }\r
-\r
- /* If null is passed in here then we are changing the\r
- priority of the calling function. */\r
- pxTCB = prvGetTCBFromHandle( pxTask );\r
-\r
- traceTASK_PRIORITY_SET( pxTCB, uxNewPriority );\r
-\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- uxCurrentPriority = pxTCB->uxBasePriority;\r
- }\r
- #else\r
- {\r
- uxCurrentPriority = pxTCB->uxPriority;\r
- }\r
- #endif\r
-\r
- if( uxCurrentPriority != uxNewPriority )\r
- {\r
- /* The priority change may have readied a task of higher\r
- priority than the calling task. */\r
- if( uxNewPriority > uxCurrentPriority )\r
- {\r
- if( pxTask != NULL )\r
- {\r
- /* The priority of another task is being raised. If we\r
- were raising the priority of the currently running task\r
- there would be no need to switch as it must have already\r
- been the highest priority task. */\r
- xYieldRequired = pdTRUE;\r
- }\r
- }\r
- else if( pxTask == NULL )\r
- {\r
- /* Setting our own priority down means there may now be another\r
- task of higher priority that is ready to execute. */\r
- xYieldRequired = pdTRUE;\r
- }\r
-\r
-\r
-\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- /* Only change the priority being used if the task is not\r
- currently using an inherited priority. */\r
- if( pxTCB->uxBasePriority == pxTCB->uxPriority )\r
- {\r
- pxTCB->uxPriority = uxNewPriority;\r
- }\r
-\r
- /* The base priority gets set whatever. */\r
- pxTCB->uxBasePriority = uxNewPriority;\r
- }\r
- #else\r
- {\r
- pxTCB->uxPriority = uxNewPriority;\r
- }\r
- #endif\r
-\r
- listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( configMAX_PRIORITIES - ( portTickType ) uxNewPriority ) );\r
-\r
- /* If the task is in the blocked or suspended list we need do\r
- nothing more than change it's priority variable. However, if\r
- the task is in a ready list it needs to be removed and placed\r
- in the queue appropriate to its new priority. */\r
- if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxCurrentPriority ] ), &( pxTCB->xGenericListItem ) ) )\r
- {\r
- /* The task is currently in its ready list - remove before adding\r
- it to it's new ready list. As we are in a critical section we\r
- can do this even if the scheduler is suspended. */\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
- prvAddTaskToReadyQueue( pxTCB );\r
- }\r
-\r
- if( xYieldRequired == pdTRUE )\r
- {\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_vTaskSuspend == 1 )\r
-\r
- void vTaskSuspend( xTaskHandle pxTaskToSuspend )\r
- {\r
- tskTCB *pxTCB;\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- /* Ensure a yield is performed if the current task is being\r
- suspended. */\r
- if( pxTaskToSuspend == pxCurrentTCB )\r
- {\r
- pxTaskToSuspend = NULL;\r
- }\r
-\r
- /* If null is passed in here then we are suspending ourselves. */\r
- pxTCB = prvGetTCBFromHandle( pxTaskToSuspend );\r
-\r
- traceTASK_SUSPEND( pxTCB );\r
-\r
- /* Remove task from the ready/delayed list and place in the suspended list. */\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
-\r
- /* Is the task waiting on an event also? */\r
- if( pxTCB->xEventListItem.pvContainer != NULL )\r
- {\r
- vListRemove( &( pxTCB->xEventListItem ) );\r
- }\r
-\r
- vListInsertEnd( ( xList * ) &xSuspendedTaskList, &( pxTCB->xGenericListItem ) );\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- if( ( void * ) pxTaskToSuspend == NULL )\r
- {\r
- if( xSchedulerRunning != pdFALSE )\r
- {\r
- /* We have just suspended the current task. */\r
- portYIELD_WITHIN_API();\r
- }\r
- else\r
- {\r
- /* The scheduler is not running, but the task that was pointed\r
- to by pxCurrentTCB has just been suspended and pxCurrentTCB\r
- must be adjusted to point to a different task. */\r
- if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == uxCurrentNumberOfTasks )\r
- {\r
- /* No other tasks are ready, so set pxCurrentTCB back to\r
- NULL so when the next task is created pxCurrentTCB will\r
- be set to point to it no matter what its relative priority\r
- is. */\r
- pxCurrentTCB = NULL;\r
- }\r
- else\r
- {\r
- vTaskSwitchContext();\r
- }\r
- }\r
- }\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_vTaskSuspend == 1 )\r
-\r
- signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask )\r
- {\r
- portBASE_TYPE xReturn = pdFALSE;\r
- const tskTCB * const pxTCB = ( tskTCB * ) xTask;\r
-\r
- /* It does not make sense to check if the calling task is suspended. */\r
- configASSERT( xTask );\r
-\r
- /* Is the task we are attempting to resume actually in the\r
- suspended list? */\r
- if( listIS_CONTAINED_WITHIN( &xSuspendedTaskList, &( pxTCB->xGenericListItem ) ) != pdFALSE )\r
- {\r
- /* Has the task already been resumed from within an ISR? */\r
- if( listIS_CONTAINED_WITHIN( &xPendingReadyList, &( pxTCB->xEventListItem ) ) != pdTRUE )\r
- {\r
- /* Is it in the suspended list because it is in the\r
- Suspended state? It is possible to be in the suspended\r
- list because it is blocked on a task with no timeout\r
- specified. */\r
- if( listIS_CONTAINED_WITHIN( NULL, &( pxTCB->xEventListItem ) ) == pdTRUE )\r
- {\r
- xReturn = pdTRUE;\r
- }\r
- }\r
- }\r
-\r
- return xReturn;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_vTaskSuspend == 1 )\r
-\r
- void vTaskResume( xTaskHandle pxTaskToResume )\r
- {\r
- tskTCB *pxTCB;\r
-\r
- /* It does not make sense to resume the calling task. */\r
- configASSERT( pxTaskToResume );\r
-\r
- /* Remove the task from whichever list it is currently in, and place\r
- it in the ready list. */\r
- pxTCB = ( tskTCB * ) pxTaskToResume;\r
-\r
- /* The parameter cannot be NULL as it is impossible to resume the\r
- currently executing task. */\r
- if( ( pxTCB != NULL ) && ( pxTCB != pxCurrentTCB ) )\r
- {\r
- taskENTER_CRITICAL();\r
- {\r
- if( xTaskIsTaskSuspended( pxTCB ) == pdTRUE )\r
- {\r
- traceTASK_RESUME( pxTCB );\r
-\r
- /* As we are in a critical section we can access the ready\r
- lists even if the scheduler is suspended. */\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
- prvAddTaskToReadyQueue( pxTCB );\r
-\r
- /* We may have just resumed a higher priority task. */\r
- if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
- {\r
- /* This yield may not cause the task just resumed to run, but\r
- will leave the lists in the correct state for the next yield. */\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
- }\r
- }\r
-\r
-#endif\r
-\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) )\r
-\r
- portBASE_TYPE xTaskResumeFromISR( xTaskHandle pxTaskToResume )\r
- {\r
- portBASE_TYPE xYieldRequired = pdFALSE;\r
- tskTCB *pxTCB;\r
- unsigned portBASE_TYPE uxSavedInterruptStatus;\r
-\r
- configASSERT( pxTaskToResume );\r
-\r
- pxTCB = ( tskTCB * ) pxTaskToResume;\r
-\r
- uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
- {\r
- if( xTaskIsTaskSuspended( pxTCB ) == pdTRUE )\r
- {\r
- traceTASK_RESUME_FROM_ISR( pxTCB );\r
-\r
- if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
- {\r
- xYieldRequired = ( pxTCB->uxPriority >= pxCurrentTCB->uxPriority );\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
- prvAddTaskToReadyQueue( pxTCB );\r
- }\r
- else\r
- {\r
- /* We cannot access the delayed or ready lists, so will hold this\r
- task pending until the scheduler is resumed, at which point a\r
- yield will be performed if necessary. */\r
- vListInsertEnd( ( xList * ) &( xPendingReadyList ), &( pxTCB->xEventListItem ) );\r
- }\r
- }\r
- }\r
- portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
-\r
- return xYieldRequired;\r
- }\r
-\r
-#endif\r
-\r
-\r
-\r
-\r
-/*-----------------------------------------------------------\r
- * PUBLIC SCHEDULER CONTROL documented in task.h\r
- *----------------------------------------------------------*/\r
-\r
-\r
-void vTaskStartScheduler( void )\r
-{\r
-portBASE_TYPE xReturn;\r
-\r
- /* Add the idle task at the lowest priority. */\r
- #if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )\r
- {\r
- /* Create the idle task, storing its handle in xIdleTaskHandle so it can\r
- be returned by the xTaskGetIdleTaskHandle() function. */\r
- xReturn = xTaskCreate( prvIdleTask, ( signed char * ) "IDLE", tskIDLE_STACK_SIZE, ( void * ) NULL, ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ), &xIdleTaskHandle );\r
- }\r
- #else\r
- {\r
- /* Create the idle task without storing its handle. */\r
- xReturn = xTaskCreate( prvIdleTask, ( signed char * ) "IDLE", tskIDLE_STACK_SIZE, ( void * ) NULL, ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ), NULL );\r
- }\r
- #endif\r
-\r
- #if ( configUSE_TIMERS == 1 )\r
- {\r
- if( xReturn == pdPASS )\r
- {\r
- xReturn = xTimerCreateTimerTask();\r
- }\r
- }\r
- #endif\r
-\r
- if( xReturn == pdPASS )\r
- {\r
- /* Interrupts are turned off here, to ensure a tick does not occur\r
- before or during the call to xPortStartScheduler(). The stacks of\r
- the created tasks contain a status word with interrupts switched on\r
- so interrupts will automatically get re-enabled when the first task\r
- starts to run.\r
-\r
- STEPPING THROUGH HERE USING A DEBUGGER CAN CAUSE BIG PROBLEMS IF THE\r
- DEBUGGER ALLOWS INTERRUPTS TO BE PROCESSED. */\r
- portDISABLE_INTERRUPTS();\r
-\r
- xSchedulerRunning = pdTRUE;\r
- xTickCount = ( portTickType ) 0U;\r
-\r
- /* If configGENERATE_RUN_TIME_STATS is defined then the following\r
- macro must be defined to configure the timer/counter used to generate\r
- the run time counter time base. */\r
- portCONFIGURE_TIMER_FOR_RUN_TIME_STATS();\r
- \r
- /* Setting up the timer tick is hardware specific and thus in the\r
- portable interface. */\r
- if( xPortStartScheduler() != pdFALSE )\r
- {\r
- /* Should not reach here as if the scheduler is running the\r
- function will not return. */\r
- }\r
- else\r
- {\r
- /* Should only reach here if a task calls xTaskEndScheduler(). */\r
- }\r
- }\r
-\r
- /* This line will only be reached if the kernel could not be started. */\r
- configASSERT( xReturn );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vTaskEndScheduler( void )\r
-{\r
- /* Stop the scheduler interrupts and call the portable scheduler end\r
- routine so the original ISRs can be restored if necessary. The port\r
- layer must ensure interrupts enable bit is left in the correct state. */\r
- portDISABLE_INTERRUPTS();\r
- xSchedulerRunning = pdFALSE;\r
- vPortEndScheduler();\r
-}\r
-/*----------------------------------------------------------*/\r
-\r
-void vTaskSuspendAll( void )\r
-{\r
- /* A critical section is not required as the variable is of type\r
- portBASE_TYPE. */\r
- ++uxSchedulerSuspended;\r
-}\r
-/*----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xTaskResumeAll( void )\r
-{\r
-register tskTCB *pxTCB;\r
-signed portBASE_TYPE xAlreadyYielded = pdFALSE;\r
-\r
- /* If uxSchedulerSuspended is zero then this function does not match a\r
- previous call to vTaskSuspendAll(). */\r
- configASSERT( uxSchedulerSuspended );\r
-\r
- /* It is possible that an ISR caused a task to be removed from an event\r
- list while the scheduler was suspended. If this was the case then the\r
- removed task will have been added to the xPendingReadyList. Once the\r
- scheduler has been resumed it is safe to move all the pending ready\r
- tasks from this list into their appropriate ready list. */\r
- taskENTER_CRITICAL();\r
- {\r
- --uxSchedulerSuspended;\r
-\r
- if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
- {\r
- if( uxCurrentNumberOfTasks > ( unsigned portBASE_TYPE ) 0U )\r
- {\r
- portBASE_TYPE xYieldRequired = pdFALSE;\r
-\r
- /* Move any readied tasks from the pending list into the\r
- appropriate ready list. */\r
- while( listLIST_IS_EMPTY( ( xList * ) &xPendingReadyList ) == pdFALSE )\r
- {\r
- pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( ( ( xList * ) &xPendingReadyList ) );\r
- vListRemove( &( pxTCB->xEventListItem ) );\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
- prvAddTaskToReadyQueue( pxTCB );\r
-\r
- /* If we have moved a task that has a priority higher than\r
- the current task then we should yield. */\r
- if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
- {\r
- xYieldRequired = pdTRUE;\r
- }\r
- }\r
-\r
- /* If any ticks occurred while the scheduler was suspended then\r
- they should be processed now. This ensures the tick count does not\r
- slip, and that any delayed tasks are resumed at the correct time. */\r
- if( uxMissedTicks > ( unsigned portBASE_TYPE ) 0U )\r
- {\r
- while( uxMissedTicks > ( unsigned portBASE_TYPE ) 0U )\r
- {\r
- vTaskIncrementTick();\r
- --uxMissedTicks;\r
- }\r
-\r
- /* As we have processed some ticks it is appropriate to yield\r
- to ensure the highest priority task that is ready to run is\r
- the task actually running. */\r
- #if configUSE_PREEMPTION == 1\r
- {\r
- xYieldRequired = pdTRUE;\r
- }\r
- #endif\r
- }\r
-\r
- if( ( xYieldRequired == pdTRUE ) || ( xMissedYield == pdTRUE ) )\r
- {\r
- xAlreadyYielded = pdTRUE;\r
- xMissedYield = pdFALSE;\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- return xAlreadyYielded;\r
-}\r
-\r
-\r
-\r
-\r
-\r
-\r
-/*-----------------------------------------------------------\r
- * PUBLIC TASK UTILITIES documented in task.h\r
- *----------------------------------------------------------*/\r
-\r
-\r
-\r
-portTickType xTaskGetTickCount( void )\r
-{\r
-portTickType xTicks;\r
-\r
- /* Critical section required if running on a 16 bit processor. */\r
- taskENTER_CRITICAL();\r
- {\r
- xTicks = xTickCount;\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- return xTicks;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-portTickType xTaskGetTickCountFromISR( void )\r
-{\r
-portTickType xReturn;\r
-unsigned portBASE_TYPE uxSavedInterruptStatus;\r
-\r
- uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
- xReturn = xTickCount;\r
- portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-unsigned portBASE_TYPE uxTaskGetNumberOfTasks( void )\r
-{\r
- /* A critical section is not required because the variables are of type\r
- portBASE_TYPE. */\r
- return uxCurrentNumberOfTasks;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_pcTaskGetTaskName == 1 )\r
-\r
- signed char *pcTaskGetTaskName( xTaskHandle xTaskToQuery )\r
- {\r
- tskTCB *pxTCB;\r
-\r
- /* If null is passed in here then the name of the calling task is being queried. */\r
- pxTCB = prvGetTCBFromHandle( xTaskToQuery );\r
- configASSERT( pxTCB );\r
- return &( pxTCB->pcTaskName[ 0 ] );\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_TRACE_FACILITY == 1 )\r
-\r
- void vTaskList( signed char *pcWriteBuffer )\r
- {\r
- unsigned portBASE_TYPE uxQueue;\r
-\r
- /* This is a VERY costly function that should be used for debug only.\r
- It leaves interrupts disabled for a LONG time. */\r
-\r
- vTaskSuspendAll();\r
- {\r
- /* Run through all the lists that could potentially contain a TCB and\r
- report the task name, state and stack high water mark. */\r
-\r
- *pcWriteBuffer = ( signed char ) 0x00;\r
- strcat( ( char * ) pcWriteBuffer, ( const char * ) "\r\n" );\r
-\r
- uxQueue = uxTopUsedPriority + ( unsigned portBASE_TYPE ) 1U;\r
-\r
- do\r
- {\r
- uxQueue--;\r
-\r
- if( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxQueue ] ) ) == pdFALSE )\r
- {\r
- prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) &( pxReadyTasksLists[ uxQueue ] ), tskREADY_CHAR );\r
- }\r
- }while( uxQueue > ( unsigned short ) tskIDLE_PRIORITY );\r
-\r
- if( listLIST_IS_EMPTY( pxDelayedTaskList ) == pdFALSE )\r
- {\r
- prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) pxDelayedTaskList, tskBLOCKED_CHAR );\r
- }\r
-\r
- if( listLIST_IS_EMPTY( pxOverflowDelayedTaskList ) == pdFALSE )\r
- {\r
- prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) pxOverflowDelayedTaskList, tskBLOCKED_CHAR );\r
- }\r
-\r
- #if( INCLUDE_vTaskDelete == 1 )\r
- {\r
- if( listLIST_IS_EMPTY( &xTasksWaitingTermination ) == pdFALSE )\r
- {\r
- prvListTaskWithinSingleList( pcWriteBuffer, &xTasksWaitingTermination, tskDELETED_CHAR );\r
- }\r
- }\r
- #endif\r
-\r
- #if ( INCLUDE_vTaskSuspend == 1 )\r
- {\r
- if( listLIST_IS_EMPTY( &xSuspendedTaskList ) == pdFALSE )\r
- {\r
- prvListTaskWithinSingleList( pcWriteBuffer, &xSuspendedTaskList, tskSUSPENDED_CHAR );\r
- }\r
- }\r
- #endif\r
- }\r
- xTaskResumeAll();\r
- }\r
-\r
-#endif\r
-/*----------------------------------------------------------*/\r
-\r
-#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
-\r
- void vTaskGetRunTimeStats( signed char *pcWriteBuffer )\r
- {\r
- unsigned portBASE_TYPE uxQueue;\r
- unsigned long ulTotalRunTime;\r
-\r
- /* This is a VERY costly function that should be used for debug only.\r
- It leaves interrupts disabled for a LONG time. */\r
-\r
- vTaskSuspendAll();\r
- {\r
- #ifdef portALT_GET_RUN_TIME_COUNTER_VALUE\r
- portALT_GET_RUN_TIME_COUNTER_VALUE( ulTotalRunTime );\r
- #else\r
- ulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();\r
- #endif\r
-\r
- /* Divide ulTotalRunTime by 100 to make the percentage caluclations\r
- simpler in the prvGenerateRunTimeStatsForTasksInList() function. */\r
- ulTotalRunTime /= 100UL;\r
- \r
- /* Run through all the lists that could potentially contain a TCB,\r
- generating a table of run timer percentages in the provided\r
- buffer. */\r
-\r
- *pcWriteBuffer = ( signed char ) 0x00;\r
- strcat( ( char * ) pcWriteBuffer, ( const char * ) "\r\n" );\r
-\r
- uxQueue = uxTopUsedPriority + ( unsigned portBASE_TYPE ) 1U;\r
-\r
- do\r
- {\r
- uxQueue--;\r
-\r
- if( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxQueue ] ) ) == pdFALSE )\r
- {\r
- prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) &( pxReadyTasksLists[ uxQueue ] ), ulTotalRunTime );\r
- }\r
- }while( uxQueue > ( unsigned short ) tskIDLE_PRIORITY );\r
-\r
- if( listLIST_IS_EMPTY( pxDelayedTaskList ) == pdFALSE )\r
- {\r
- prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) pxDelayedTaskList, ulTotalRunTime );\r
- }\r
-\r
- if( listLIST_IS_EMPTY( pxOverflowDelayedTaskList ) == pdFALSE )\r
- {\r
- prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) pxOverflowDelayedTaskList, ulTotalRunTime );\r
- }\r
-\r
- #if ( INCLUDE_vTaskDelete == 1 )\r
- {\r
- if( listLIST_IS_EMPTY( &xTasksWaitingTermination ) == pdFALSE )\r
- {\r
- prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, &xTasksWaitingTermination, ulTotalRunTime );\r
- }\r
- }\r
- #endif\r
-\r
- #if ( INCLUDE_vTaskSuspend == 1 )\r
- {\r
- if( listLIST_IS_EMPTY( &xSuspendedTaskList ) == pdFALSE )\r
- {\r
- prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, &xSuspendedTaskList, ulTotalRunTime );\r
- }\r
- }\r
- #endif\r
- }\r
- xTaskResumeAll();\r
- }\r
-\r
-#endif\r
-/*----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )\r
-\r
- xTaskHandle xTaskGetIdleTaskHandle( void )\r
- {\r
- /* If xTaskGetIdleTaskHandle() is called before the scheduler has been\r
- started, then xIdleTaskHandle will be NULL. */\r
- configASSERT( ( xIdleTaskHandle != NULL ) );\r
- return xIdleTaskHandle;\r
- }\r
- \r
-#endif\r
-\r
-/*-----------------------------------------------------------\r
- * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES\r
- * documented in task.h\r
- *----------------------------------------------------------*/\r
-\r
-void vTaskIncrementTick( void )\r
-{\r
-tskTCB * pxTCB;\r
-\r
- /* Called by the portable layer each time a tick interrupt occurs.\r
- Increments the tick then checks to see if the new tick value will cause any\r
- tasks to be unblocked. */\r
- if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
- {\r
- ++xTickCount;\r
- if( xTickCount == ( portTickType ) 0U )\r
- {\r
- xList *pxTemp;\r
-\r
- /* Tick count has overflowed so we need to swap the delay lists.\r
- If there are any items in pxDelayedTaskList here then there is\r
- an error! */\r
- configASSERT( ( listLIST_IS_EMPTY( pxDelayedTaskList ) ) );\r
- \r
- pxTemp = pxDelayedTaskList;\r
- pxDelayedTaskList = pxOverflowDelayedTaskList;\r
- pxOverflowDelayedTaskList = pxTemp;\r
- xNumOfOverflows++;\r
- \r
- if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )\r
- {\r
- /* The new current delayed list is empty. Set\r
- xNextTaskUnblockTime to the maximum possible value so it is\r
- extremely unlikely that the \r
- if( xTickCount >= xNextTaskUnblockTime ) test will pass until\r
- there is an item in the delayed list. */\r
- xNextTaskUnblockTime = portMAX_DELAY;\r
- }\r
- else\r
- {\r
- /* The new current delayed list is not empty, get the value of\r
- the item at the head of the delayed list. This is the time at\r
- which the task at the head of the delayed list should be removed\r
- from the Blocked state. */\r
- pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList );\r
- xNextTaskUnblockTime = listGET_LIST_ITEM_VALUE( &( pxTCB->xGenericListItem ) );\r
- }\r
- }\r
-\r
- /* See if this tick has made a timeout expire. */\r
- prvCheckDelayedTasks();\r
- }\r
- else\r
- {\r
- ++uxMissedTicks;\r
-\r
- /* The tick hook gets called at regular intervals, even if the\r
- scheduler is locked. */\r
- #if ( configUSE_TICK_HOOK == 1 )\r
- {\r
- vApplicationTickHook();\r
- }\r
- #endif\r
- }\r
-\r
- #if ( configUSE_TICK_HOOK == 1 )\r
- {\r
- /* Guard against the tick hook being called when the missed tick\r
- count is being unwound (when the scheduler is being unlocked. */\r
- if( uxMissedTicks == ( unsigned portBASE_TYPE ) 0U )\r
- {\r
- vApplicationTickHook();\r
- }\r
- }\r
- #endif\r
-\r
- traceTASK_INCREMENT_TICK( xTickCount );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
-\r
- void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction )\r
- {\r
- tskTCB *xTCB;\r
-\r
- /* If xTask is NULL then we are setting our own task hook. */\r
- if( xTask == NULL )\r
- {\r
- xTCB = ( tskTCB * ) pxCurrentTCB;\r
- }\r
- else\r
- {\r
- xTCB = ( tskTCB * ) xTask;\r
- }\r
-\r
- /* Save the hook function in the TCB. A critical section is required as\r
- the value can be accessed from an interrupt. */\r
- taskENTER_CRITICAL();\r
- xTCB->pxTaskTag = pxHookFunction;\r
- taskEXIT_CRITICAL();\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
-\r
- pdTASK_HOOK_CODE xTaskGetApplicationTaskTag( xTaskHandle xTask )\r
- {\r
- tskTCB *xTCB;\r
- pdTASK_HOOK_CODE xReturn;\r
-\r
- /* If xTask is NULL then we are setting our own task hook. */\r
- if( xTask == NULL )\r
- {\r
- xTCB = ( tskTCB * ) pxCurrentTCB;\r
- }\r
- else\r
- {\r
- xTCB = ( tskTCB * ) xTask;\r
- }\r
-\r
- /* Save the hook function in the TCB. A critical section is required as\r
- the value can be accessed from an interrupt. */\r
- taskENTER_CRITICAL();\r
- xReturn = xTCB->pxTaskTag;\r
- taskEXIT_CRITICAL();\r
-\r
- return xReturn;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
-\r
- portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, void *pvParameter )\r
- {\r
- tskTCB *xTCB;\r
- portBASE_TYPE xReturn;\r
-\r
- /* If xTask is NULL then we are calling our own task hook. */\r
- if( xTask == NULL )\r
- {\r
- xTCB = ( tskTCB * ) pxCurrentTCB;\r
- }\r
- else\r
- {\r
- xTCB = ( tskTCB * ) xTask;\r
- }\r
-\r
- if( xTCB->pxTaskTag != NULL )\r
- {\r
- xReturn = xTCB->pxTaskTag( pvParameter );\r
- }\r
- else\r
- {\r
- xReturn = pdFAIL;\r
- }\r
-\r
- return xReturn;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-void vTaskSwitchContext( void )\r
-{\r
- if( uxSchedulerSuspended != ( unsigned portBASE_TYPE ) pdFALSE )\r
- {\r
- /* The scheduler is currently suspended - do not allow a context\r
- switch. */\r
- xMissedYield = pdTRUE;\r
- }\r
- else\r
- {\r
- traceTASK_SWITCHED_OUT();\r
- \r
- #if ( configGENERATE_RUN_TIME_STATS == 1 )\r
- {\r
- unsigned long ulTempCounter;\r
- \r
- #ifdef portALT_GET_RUN_TIME_COUNTER_VALUE\r
- portALT_GET_RUN_TIME_COUNTER_VALUE( ulTempCounter );\r
- #else\r
- ulTempCounter = portGET_RUN_TIME_COUNTER_VALUE();\r
- #endif\r
- \r
- /* Add the amount of time the task has been running to the accumulated\r
- time so far. The time the task started running was stored in\r
- ulTaskSwitchedInTime. Note that there is no overflow protection here\r
- so count values are only valid until the timer overflows. Generally\r
- this will be about 1 hour assuming a 1uS timer increment. */\r
- pxCurrentTCB->ulRunTimeCounter += ( ulTempCounter - ulTaskSwitchedInTime );\r
- ulTaskSwitchedInTime = ulTempCounter;\r
- }\r
- #endif\r
- \r
- taskFIRST_CHECK_FOR_STACK_OVERFLOW();\r
- taskSECOND_CHECK_FOR_STACK_OVERFLOW();\r
- \r
- /* Find the highest priority queue that contains ready tasks. */\r
- while( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxTopReadyPriority ] ) ) )\r
- {\r
- configASSERT( uxTopReadyPriority );\r
- --uxTopReadyPriority;\r
- }\r
- \r
- /* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the tasks of the\r
- same priority get an equal share of the processor time. */\r
- listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopReadyPriority ] ) );\r
- \r
- traceTASK_SWITCHED_IN();\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vTaskPlaceOnEventList( const xList * const pxEventList, portTickType xTicksToWait )\r
-{\r
-portTickType xTimeToWake;\r
-\r
- configASSERT( pxEventList );\r
-\r
- /* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED OR THE\r
- SCHEDULER SUSPENDED. */\r
-\r
- /* Place the event list item of the TCB in the appropriate event list.\r
- This is placed in the list in priority order so the highest priority task\r
- is the first to be woken by the event. */\r
- vListInsert( ( xList * ) pxEventList, ( xListItem * ) &( pxCurrentTCB->xEventListItem ) );\r
-\r
- /* We must remove ourselves from the ready list before adding ourselves\r
- to the blocked list as the same list item is used for both lists. We have\r
- exclusive access to the ready lists as the scheduler is locked. */\r
- vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
-\r
-\r
- #if ( INCLUDE_vTaskSuspend == 1 )\r
- {\r
- if( xTicksToWait == portMAX_DELAY )\r
- {\r
- /* Add ourselves to the suspended task list instead of a delayed task\r
- list to ensure we are not woken by a timing event. We will block\r
- indefinitely. */\r
- vListInsertEnd( ( xList * ) &xSuspendedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
- }\r
- else\r
- {\r
- /* Calculate the time at which the task should be woken if the event does\r
- not occur. This may overflow but this doesn't matter. */\r
- xTimeToWake = xTickCount + xTicksToWait;\r
- prvAddCurrentTaskToDelayedList( xTimeToWake );\r
- }\r
- }\r
- #else\r
- {\r
- /* Calculate the time at which the task should be woken if the event does\r
- not occur. This may overflow but this doesn't matter. */\r
- xTimeToWake = xTickCount + xTicksToWait;\r
- prvAddCurrentTaskToDelayedList( xTimeToWake );\r
- }\r
- #endif\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if configUSE_TIMERS == 1\r
-\r
- void vTaskPlaceOnEventListRestricted( const xList * const pxEventList, portTickType xTicksToWait )\r
- {\r
- portTickType xTimeToWake;\r
-\r
- configASSERT( pxEventList );\r
-\r
- /* This function should not be called by application code hence the\r
- 'Restricted' in its name. It is not part of the public API. It is\r
- designed for use by kernel code, and has special calling requirements -\r
- it should be called from a critical section. */\r
-\r
- \r
- /* Place the event list item of the TCB in the appropriate event list.\r
- In this case it is assume that this is the only task that is going to\r
- be waiting on this event list, so the faster vListInsertEnd() function\r
- can be used in place of vListInsert. */\r
- vListInsertEnd( ( xList * ) pxEventList, ( xListItem * ) &( pxCurrentTCB->xEventListItem ) );\r
-\r
- /* We must remove this task from the ready list before adding it to the\r
- blocked list as the same list item is used for both lists. This\r
- function is called form a critical section. */\r
- vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
-\r
- /* Calculate the time at which the task should be woken if the event does\r
- not occur. This may overflow but this doesn't matter. */\r
- xTimeToWake = xTickCount + xTicksToWait;\r
- prvAddCurrentTaskToDelayedList( xTimeToWake );\r
- }\r
- \r
-#endif /* configUSE_TIMERS */\r
-/*-----------------------------------------------------------*/\r
-\r
-signed portBASE_TYPE xTaskRemoveFromEventList( const xList * const pxEventList )\r
-{\r
-tskTCB *pxUnblockedTCB;\r
-portBASE_TYPE xReturn;\r
-\r
- /* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED OR THE\r
- SCHEDULER SUSPENDED. It can also be called from within an ISR. */\r
-\r
- /* The event list is sorted in priority order, so we can remove the\r
- first in the list, remove the TCB from the delayed list, and add\r
- it to the ready list.\r
-\r
- If an event is for a queue that is locked then this function will never\r
- get called - the lock count on the queue will get modified instead. This\r
- means we can always expect exclusive access to the event list here.\r
- \r
- This function assumes that a check has already been made to ensure that\r
- pxEventList is not empty. */\r
- pxUnblockedTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );\r
- configASSERT( pxUnblockedTCB );\r
- vListRemove( &( pxUnblockedTCB->xEventListItem ) );\r
-\r
- if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
- {\r
- vListRemove( &( pxUnblockedTCB->xGenericListItem ) );\r
- prvAddTaskToReadyQueue( pxUnblockedTCB );\r
- }\r
- else\r
- {\r
- /* We cannot access the delayed or ready lists, so will hold this\r
- task pending until the scheduler is resumed. */\r
- vListInsertEnd( ( xList * ) &( xPendingReadyList ), &( pxUnblockedTCB->xEventListItem ) );\r
- }\r
-\r
- if( pxUnblockedTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
- {\r
- /* Return true if the task removed from the event list has\r
- a higher priority than the calling task. This allows\r
- the calling task to know if it should force a context\r
- switch now. */\r
- xReturn = pdTRUE;\r
- }\r
- else\r
- {\r
- xReturn = pdFALSE;\r
- }\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vTaskSetTimeOutState( xTimeOutType * const pxTimeOut )\r
-{\r
- configASSERT( pxTimeOut );\r
- pxTimeOut->xOverflowCount = xNumOfOverflows;\r
- pxTimeOut->xTimeOnEntering = xTickCount;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-portBASE_TYPE xTaskCheckForTimeOut( xTimeOutType * const pxTimeOut, portTickType * const pxTicksToWait )\r
-{\r
-portBASE_TYPE xReturn;\r
-\r
- configASSERT( pxTimeOut );\r
- configASSERT( pxTicksToWait );\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- #if ( INCLUDE_vTaskSuspend == 1 )\r
- /* If INCLUDE_vTaskSuspend is set to 1 and the block time specified is\r
- the maximum block time then the task should block indefinitely, and\r
- therefore never time out. */\r
- if( *pxTicksToWait == portMAX_DELAY )\r
- {\r
- xReturn = pdFALSE;\r
- }\r
- else /* We are not blocking indefinitely, perform the checks below. */\r
- #endif\r
-\r
- if( ( xNumOfOverflows != pxTimeOut->xOverflowCount ) && ( ( portTickType ) xTickCount >= ( portTickType ) pxTimeOut->xTimeOnEntering ) )\r
- {\r
- /* The tick count is greater than the time at which vTaskSetTimeout()\r
- was called, but has also overflowed since vTaskSetTimeOut() was called.\r
- It must have wrapped all the way around and gone past us again. This\r
- passed since vTaskSetTimeout() was called. */\r
- xReturn = pdTRUE;\r
- }\r
- else if( ( ( portTickType ) ( ( portTickType ) xTickCount - ( portTickType ) pxTimeOut->xTimeOnEntering ) ) < ( portTickType ) *pxTicksToWait )\r
- {\r
- /* Not a genuine timeout. Adjust parameters for time remaining. */\r
- *pxTicksToWait -= ( ( portTickType ) xTickCount - ( portTickType ) pxTimeOut->xTimeOnEntering );\r
- vTaskSetTimeOutState( pxTimeOut );\r
- xReturn = pdFALSE;\r
- }\r
- else\r
- {\r
- xReturn = pdTRUE;\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void vTaskMissedYield( void )\r
-{\r
- xMissedYield = pdTRUE;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_TRACE_FACILITY == 1 )\r
- unsigned portBASE_TYPE uxTaskGetTaskNumber( xTaskHandle xTask )\r
- {\r
- unsigned portBASE_TYPE uxReturn;\r
- tskTCB *pxTCB;\r
- \r
- if( xTask != NULL )\r
- {\r
- pxTCB = ( tskTCB * ) xTask;\r
- uxReturn = pxTCB->uxTaskNumber;\r
- }\r
- else\r
- {\r
- uxReturn = 0U;\r
- }\r
- \r
- return uxReturn;\r
- }\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_TRACE_FACILITY == 1 )\r
- void vTaskSetTaskNumber( xTaskHandle xTask, unsigned portBASE_TYPE uxHandle )\r
- {\r
- tskTCB *pxTCB;\r
- \r
- if( xTask != NULL )\r
- {\r
- pxTCB = ( tskTCB * ) xTask;\r
- pxTCB->uxTaskNumber = uxHandle;\r
- }\r
- }\r
-#endif\r
-\r
-\r
-/*\r
- * -----------------------------------------------------------\r
- * The Idle task.\r
- * ----------------------------------------------------------\r
- *\r
- * The portTASK_FUNCTION() macro is used to allow port/compiler specific\r
- * language extensions. The equivalent prototype for this function is:\r
- *\r
- * void prvIdleTask( void *pvParameters );\r
- *\r
- */\r
-static portTASK_FUNCTION( prvIdleTask, pvParameters )\r
-{\r
- /* Stop warnings. */\r
- ( void ) pvParameters;\r
-\r
- for( ;; )\r
- {\r
- /* See if any tasks have been deleted. */\r
- prvCheckTasksWaitingTermination();\r
-\r
- #if ( configUSE_PREEMPTION == 0 )\r
- {\r
- /* If we are not using preemption we keep forcing a task switch to\r
- see if any other task has become available. If we are using\r
- preemption we don't need to do this as any task becoming available\r
- will automatically get the processor anyway. */\r
- taskYIELD();\r
- }\r
- #endif\r
-\r
- #if ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) )\r
- {\r
- /* When using preemption tasks of equal priority will be\r
- timesliced. If a task that is sharing the idle priority is ready\r
- to run then the idle task should yield before the end of the\r
- timeslice.\r
-\r
- A critical region is not required here as we are just reading from\r
- the list, and an occasional incorrect value will not matter. If\r
- the ready list at the idle priority contains more than one task\r
- then a task other than the idle task is ready to execute. */\r
- if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > ( unsigned portBASE_TYPE ) 1 )\r
- {\r
- taskYIELD();\r
- }\r
- }\r
- #endif\r
-\r
- #if ( configUSE_IDLE_HOOK == 1 )\r
- {\r
- extern void vApplicationIdleHook( void );\r
-\r
- /* Call the user defined function from within the idle task. This\r
- allows the application designer to add background functionality\r
- without the overhead of a separate task.\r
- NOTE: vApplicationIdleHook() MUST NOT, UNDER ANY CIRCUMSTANCES,\r
- CALL A FUNCTION THAT MIGHT BLOCK. */\r
- vApplicationIdleHook();\r
- }\r
- #endif\r
- }\r
-} /*lint !e715 pvParameters is not accessed but all task functions require the same prototype. */\r
-\r
-\r
-\r
-\r
-\r
-\r
-\r
-/*-----------------------------------------------------------\r
- * File private functions documented at the top of the file.\r
- *----------------------------------------------------------*/\r
-\r
-\r
-\r
-static void prvInitialiseTCBVariables( tskTCB *pxTCB, const signed char * const pcName, unsigned portBASE_TYPE uxPriority, const xMemoryRegion * const xRegions, unsigned short usStackDepth )\r
-{\r
- /* Store the function name in the TCB. */\r
- #if configMAX_TASK_NAME_LEN > 1\r
- {\r
- /* Don't bring strncpy into the build unnecessarily. */\r
- strncpy( ( char * ) pxTCB->pcTaskName, ( const char * ) pcName, ( unsigned short ) configMAX_TASK_NAME_LEN );\r
- }\r
- #endif\r
- pxTCB->pcTaskName[ ( unsigned short ) configMAX_TASK_NAME_LEN - ( unsigned short ) 1 ] = ( signed char ) '\0';\r
-\r
- /* This is used as an array index so must ensure it's not too large. First\r
- remove the privilege bit if one is present. */\r
- if( uxPriority >= configMAX_PRIORITIES )\r
- {\r
- uxPriority = configMAX_PRIORITIES - ( unsigned portBASE_TYPE ) 1U;\r
- }\r
-\r
- pxTCB->uxPriority = uxPriority;\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- pxTCB->uxBasePriority = uxPriority;\r
- }\r
- #endif\r
-\r
- vListInitialiseItem( &( pxTCB->xGenericListItem ) );\r
- vListInitialiseItem( &( pxTCB->xEventListItem ) );\r
-\r
- /* Set the pxTCB as a link back from the xListItem. This is so we can get\r
- back to the containing TCB from a generic item in a list. */\r
- listSET_LIST_ITEM_OWNER( &( pxTCB->xGenericListItem ), pxTCB );\r
-\r
- /* Event lists are always in priority order. */\r
- listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) uxPriority );\r
- listSET_LIST_ITEM_OWNER( &( pxTCB->xEventListItem ), pxTCB );\r
-\r
- #if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
- {\r
- pxTCB->uxCriticalNesting = ( unsigned portBASE_TYPE ) 0U;\r
- }\r
- #endif\r
-\r
- #if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
- {\r
- pxTCB->pxTaskTag = NULL;\r
- }\r
- #endif\r
-\r
- #if ( configGENERATE_RUN_TIME_STATS == 1 )\r
- {\r
- pxTCB->ulRunTimeCounter = 0UL;\r
- }\r
- #endif\r
-\r
- #if ( portUSING_MPU_WRAPPERS == 1 )\r
- {\r
- vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, pxTCB->pxStack, usStackDepth );\r
- }\r
- #else\r
- {\r
- ( void ) xRegions;\r
- ( void ) usStackDepth;\r
- }\r
- #endif\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( portUSING_MPU_WRAPPERS == 1 )\r
-\r
- void vTaskAllocateMPURegions( xTaskHandle xTaskToModify, const xMemoryRegion * const xRegions )\r
- {\r
- tskTCB *pxTCB;\r
- \r
- if( xTaskToModify == pxCurrentTCB )\r
- {\r
- xTaskToModify = NULL;\r
- }\r
-\r
- /* If null is passed in here then we are deleting ourselves. */\r
- pxTCB = prvGetTCBFromHandle( xTaskToModify );\r
-\r
- vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, NULL, 0 );\r
- }\r
- /*-----------------------------------------------------------*/\r
-#endif\r
-\r
-static void prvInitialiseTaskLists( void )\r
-{\r
-unsigned portBASE_TYPE uxPriority;\r
-\r
- for( uxPriority = ( unsigned portBASE_TYPE ) 0U; uxPriority < configMAX_PRIORITIES; uxPriority++ )\r
- {\r
- vListInitialise( ( xList * ) &( pxReadyTasksLists[ uxPriority ] ) );\r
- }\r
-\r
- vListInitialise( ( xList * ) &xDelayedTaskList1 );\r
- vListInitialise( ( xList * ) &xDelayedTaskList2 );\r
- vListInitialise( ( xList * ) &xPendingReadyList );\r
-\r
- #if ( INCLUDE_vTaskDelete == 1 )\r
- {\r
- vListInitialise( ( xList * ) &xTasksWaitingTermination );\r
- }\r
- #endif\r
-\r
- #if ( INCLUDE_vTaskSuspend == 1 )\r
- {\r
- vListInitialise( ( xList * ) &xSuspendedTaskList );\r
- }\r
- #endif\r
-\r
- /* Start with pxDelayedTaskList using list1 and the pxOverflowDelayedTaskList\r
- using list2. */\r
- pxDelayedTaskList = &xDelayedTaskList1;\r
- pxOverflowDelayedTaskList = &xDelayedTaskList2;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvCheckTasksWaitingTermination( void )\r
-{\r
- #if ( INCLUDE_vTaskDelete == 1 )\r
- {\r
- portBASE_TYPE xListIsEmpty;\r
-\r
- /* ucTasksDeleted is used to prevent vTaskSuspendAll() being called\r
- too often in the idle task. */\r
- if( uxTasksDeleted > ( unsigned portBASE_TYPE ) 0U )\r
- {\r
- vTaskSuspendAll();\r
- xListIsEmpty = listLIST_IS_EMPTY( &xTasksWaitingTermination );\r
- xTaskResumeAll();\r
-\r
- if( xListIsEmpty == pdFALSE )\r
- {\r
- tskTCB *pxTCB;\r
-\r
- taskENTER_CRITICAL();\r
- {\r
- pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( ( ( xList * ) &xTasksWaitingTermination ) );\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
- --uxCurrentNumberOfTasks;\r
- --uxTasksDeleted;\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- prvDeleteTCB( pxTCB );\r
- }\r
- }\r
- }\r
- #endif\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvAddCurrentTaskToDelayedList( portTickType xTimeToWake )\r
-{\r
- /* The list item will be inserted in wake time order. */\r
- listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xGenericListItem ), xTimeToWake );\r
-\r
- if( xTimeToWake < xTickCount )\r
- {\r
- /* Wake time has overflowed. Place this item in the overflow list. */\r
- vListInsert( ( xList * ) pxOverflowDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
- }\r
- else\r
- {\r
- /* The wake time has not overflowed, so we can use the current block list. */\r
- vListInsert( ( xList * ) pxDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
-\r
- /* If the task entering the blocked state was placed at the head of the\r
- list of blocked tasks then xNextTaskUnblockTime needs to be updated\r
- too. */\r
- if( xTimeToWake < xNextTaskUnblockTime )\r
- {\r
- xNextTaskUnblockTime = xTimeToWake;\r
- }\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static tskTCB *prvAllocateTCBAndStack( unsigned short usStackDepth, portSTACK_TYPE *puxStackBuffer )\r
-{\r
-tskTCB *pxNewTCB;\r
-\r
- /* Allocate space for the TCB. Where the memory comes from depends on\r
- the implementation of the port malloc function. */\r
- pxNewTCB = ( tskTCB * ) pvPortMalloc( sizeof( tskTCB ) );\r
-\r
- if( pxNewTCB != NULL )\r
- {\r
- /* Allocate space for the stack used by the task being created.\r
- The base of the stack memory stored in the TCB so the task can\r
- be deleted later if required. */\r
- pxNewTCB->pxStack = ( portSTACK_TYPE * ) pvPortMallocAligned( ( ( ( size_t )usStackDepth ) * sizeof( portSTACK_TYPE ) ), puxStackBuffer );\r
-\r
- if( pxNewTCB->pxStack == NULL )\r
- {\r
- /* Could not allocate the stack. Delete the allocated TCB. */\r
- vPortFree( pxNewTCB );\r
- pxNewTCB = NULL;\r
- }\r
- else\r
- {\r
- /* Just to help debugging. */\r
- memset( pxNewTCB->pxStack, ( int ) tskSTACK_FILL_BYTE, ( size_t ) usStackDepth * sizeof( portSTACK_TYPE ) );\r
- }\r
- }\r
-\r
- return pxNewTCB;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_TRACE_FACILITY == 1 )\r
-\r
- static void prvListTaskWithinSingleList( const signed char *pcWriteBuffer, xList *pxList, signed char cStatus )\r
- {\r
- volatile tskTCB *pxNextTCB, *pxFirstTCB;\r
- unsigned short usStackRemaining;\r
- PRIVILEGED_DATA static char pcStatusString[ configMAX_TASK_NAME_LEN + 30 ];\r
-\r
- /* Write the details of all the TCB's in pxList into the buffer. */\r
- listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );\r
- do\r
- {\r
- listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );\r
- #if ( portSTACK_GROWTH > 0 )\r
- {\r
- usStackRemaining = usTaskCheckFreeStackSpace( ( unsigned char * ) pxNextTCB->pxEndOfStack );\r
- }\r
- #else\r
- {\r
- usStackRemaining = usTaskCheckFreeStackSpace( ( unsigned char * ) pxNextTCB->pxStack );\r
- }\r
- #endif \r
- \r
- sprintf( pcStatusString, ( char * ) "%s\t\t%c\t%u\t%u\t%u\r\n", pxNextTCB->pcTaskName, cStatus, ( unsigned int ) pxNextTCB->uxPriority, usStackRemaining, ( unsigned int ) pxNextTCB->uxTCBNumber );\r
- strcat( ( char * ) pcWriteBuffer, ( char * ) pcStatusString );\r
-\r
- } while( pxNextTCB != pxFirstTCB );\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
-\r
- static void prvGenerateRunTimeStatsForTasksInList( const signed char *pcWriteBuffer, xList *pxList, unsigned long ulTotalRunTime )\r
- {\r
- volatile tskTCB *pxNextTCB, *pxFirstTCB;\r
- unsigned long ulStatsAsPercentage;\r
-\r
- /* Write the run time stats of all the TCB's in pxList into the buffer. */\r
- listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );\r
- do\r
- {\r
- /* Get next TCB in from the list. */\r
- listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );\r
-\r
- /* Divide by zero check. */\r
- if( ulTotalRunTime > 0UL )\r
- {\r
- /* Has the task run at all? */\r
- if( pxNextTCB->ulRunTimeCounter == 0UL )\r
- {\r
- /* The task has used no CPU time at all. */\r
- sprintf( pcStatsString, ( char * ) "%s\t\t0\t\t0%%\r\n", pxNextTCB->pcTaskName );\r
- }\r
- else\r
- {\r
- /* What percentage of the total run time has the task used?\r
- This will always be rounded down to the nearest integer.\r
- ulTotalRunTime has already been divided by 100. */\r
- ulStatsAsPercentage = pxNextTCB->ulRunTimeCounter / ulTotalRunTime;\r
-\r
- if( ulStatsAsPercentage > 0UL )\r
- {\r
- #ifdef portLU_PRINTF_SPECIFIER_REQUIRED\r
- {\r
- sprintf( pcStatsString, ( char * ) "%s\t\t%lu\t\t%lu%%\r\n", pxNextTCB->pcTaskName, pxNextTCB->ulRunTimeCounter, ulStatsAsPercentage ); \r
- }\r
- #else\r
- {\r
- /* sizeof( int ) == sizeof( long ) so a smaller\r
- printf() library can be used. */\r
- sprintf( pcStatsString, ( char * ) "%s\t\t%u\t\t%u%%\r\n", pxNextTCB->pcTaskName, ( unsigned int ) pxNextTCB->ulRunTimeCounter, ( unsigned int ) ulStatsAsPercentage );\r
- }\r
- #endif\r
- }\r
- else\r
- {\r
- /* If the percentage is zero here then the task has\r
- consumed less than 1% of the total run time. */\r
- #ifdef portLU_PRINTF_SPECIFIER_REQUIRED\r
- {\r
- sprintf( pcStatsString, ( char * ) "%s\t\t%lu\t\t<1%%\r\n", pxNextTCB->pcTaskName, pxNextTCB->ulRunTimeCounter ); \r
- }\r
- #else\r
- {\r
- /* sizeof( int ) == sizeof( long ) so a smaller\r
- printf() library can be used. */\r
- sprintf( pcStatsString, ( char * ) "%s\t\t%u\t\t<1%%\r\n", pxNextTCB->pcTaskName, ( unsigned int ) pxNextTCB->ulRunTimeCounter );\r
- }\r
- #endif\r
- }\r
- }\r
-\r
- strcat( ( char * ) pcWriteBuffer, ( char * ) pcStatsString );\r
- }\r
-\r
- } while( pxNextTCB != pxFirstTCB );\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
-\r
- static unsigned short usTaskCheckFreeStackSpace( const unsigned char * pucStackByte )\r
- {\r
- register unsigned short usCount = 0U;\r
-\r
- while( *pucStackByte == tskSTACK_FILL_BYTE )\r
- {\r
- pucStackByte -= portSTACK_GROWTH;\r
- usCount++;\r
- }\r
-\r
- usCount /= sizeof( portSTACK_TYPE );\r
-\r
- return usCount;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_uxTaskGetStackHighWaterMark == 1 )\r
-\r
- unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask )\r
- {\r
- tskTCB *pxTCB;\r
- unsigned char *pcEndOfStack;\r
- unsigned portBASE_TYPE uxReturn;\r
-\r
- pxTCB = prvGetTCBFromHandle( xTask );\r
-\r
- #if portSTACK_GROWTH < 0\r
- {\r
- pcEndOfStack = ( unsigned char * ) pxTCB->pxStack;\r
- }\r
- #else\r
- {\r
- pcEndOfStack = ( unsigned char * ) pxTCB->pxEndOfStack;\r
- }\r
- #endif\r
-\r
- uxReturn = ( unsigned portBASE_TYPE ) usTaskCheckFreeStackSpace( pcEndOfStack );\r
-\r
- return uxReturn;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_vTaskDelete == 1 )\r
-\r
- static void prvDeleteTCB( tskTCB *pxTCB )\r
- {\r
- /* This call is required specifically for the TriCore port. It must be\r
- above the vPortFree() calls. The call is also used by ports/demos that\r
- want to allocate and clean RAM statically. */\r
- portCLEAN_UP_TCB( pxTCB );\r
-\r
- /* Free up the memory allocated by the scheduler for the task. It is up to\r
- the task to free any memory allocated at the application level. */\r
- vPortFreeAligned( pxTCB->pxStack );\r
- vPortFree( pxTCB );\r
- }\r
-\r
-#endif\r
-\r
-\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) )\r
-\r
- xTaskHandle xTaskGetCurrentTaskHandle( void )\r
- {\r
- xTaskHandle xReturn;\r
-\r
- /* A critical section is not required as this is not called from\r
- an interrupt and the current TCB will always be the same for any\r
- individual execution thread. */\r
- xReturn = pxCurrentTCB;\r
-\r
- return xReturn;\r
- }\r
-\r
-#endif\r
-\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )\r
-\r
- portBASE_TYPE xTaskGetSchedulerState( void )\r
- {\r
- portBASE_TYPE xReturn;\r
-\r
- if( xSchedulerRunning == pdFALSE )\r
- {\r
- xReturn = taskSCHEDULER_NOT_STARTED;\r
- }\r
- else\r
- {\r
- if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
- {\r
- xReturn = taskSCHEDULER_RUNNING;\r
- }\r
- else\r
- {\r
- xReturn = taskSCHEDULER_SUSPENDED;\r
- }\r
- }\r
-\r
- return xReturn;\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_MUTEXES == 1 )\r
-\r
- void vTaskPriorityInherit( xTaskHandle * const pxMutexHolder )\r
- {\r
- tskTCB * const pxTCB = ( tskTCB * ) pxMutexHolder;\r
-\r
- configASSERT( pxMutexHolder );\r
-\r
- if( pxTCB->uxPriority < pxCurrentTCB->uxPriority )\r
- {\r
- /* Adjust the mutex holder state to account for its new priority. */\r
- listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) pxCurrentTCB->uxPriority );\r
-\r
- /* If the task being modified is in the ready state it will need to\r
- be moved in to a new list. */\r
- if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ pxTCB->uxPriority ] ), &( pxTCB->xGenericListItem ) ) != pdFALSE )\r
- {\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
-\r
- /* Inherit the priority before being moved into the new list. */\r
- pxTCB->uxPriority = pxCurrentTCB->uxPriority;\r
- prvAddTaskToReadyQueue( pxTCB );\r
- }\r
- else\r
- {\r
- /* Just inherit the priority. */\r
- pxTCB->uxPriority = pxCurrentTCB->uxPriority;\r
- }\r
-\r
- traceTASK_PRIORITY_INHERIT( pxTCB, pxCurrentTCB->uxPriority );\r
- }\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( configUSE_MUTEXES == 1 )\r
-\r
- void vTaskPriorityDisinherit( xTaskHandle * const pxMutexHolder )\r
- {\r
- tskTCB * const pxTCB = ( tskTCB * ) pxMutexHolder;\r
-\r
- if( pxMutexHolder != NULL )\r
- {\r
- if( pxTCB->uxPriority != pxTCB->uxBasePriority )\r
- {\r
- /* We must be the running task to be able to give the mutex back.\r
- Remove ourselves from the ready list we currently appear in. */\r
- vListRemove( &( pxTCB->xGenericListItem ) );\r
-\r
- /* Disinherit the priority before adding the task into the new\r
- ready list. */\r
- traceTASK_PRIORITY_DISINHERIT( pxTCB, pxTCB->uxBasePriority );\r
- pxTCB->uxPriority = pxTCB->uxBasePriority;\r
- listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) pxTCB->uxPriority );\r
- prvAddTaskToReadyQueue( pxTCB );\r
- }\r
- }\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
-\r
- void vTaskEnterCritical( void )\r
- {\r
- portDISABLE_INTERRUPTS();\r
-\r
- if( xSchedulerRunning != pdFALSE )\r
- {\r
- ( pxCurrentTCB->uxCriticalNesting )++;\r
- }\r
- }\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
-\r
-void vTaskExitCritical( void )\r
-{\r
- if( xSchedulerRunning != pdFALSE )\r
- {\r
- if( pxCurrentTCB->uxCriticalNesting > 0U )\r
- {\r
- ( pxCurrentTCB->uxCriticalNesting )--;\r
-\r
- if( pxCurrentTCB->uxCriticalNesting == 0U )\r
- {\r
- portENABLE_INTERRUPTS();\r
- }\r
- }\r
- }\r
-}\r
-\r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-\r
-\r
-\r
+++ /dev/null
-/*\r
- FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
-\r
-\r
- ***************************************************************************\r
- * *\r
- * FreeRTOS tutorial books are available in pdf and paperback. *\r
- * Complete, revised, and edited pdf reference manuals are also *\r
- * available. *\r
- * *\r
- * Purchasing FreeRTOS documentation will not only help you, by *\r
- * ensuring you get running as quickly as possible and with an *\r
- * in-depth knowledge of how to use FreeRTOS, it will also help *\r
- * the FreeRTOS project to continue with its mission of providing *\r
- * professional grade, cross platform, de facto standard solutions *\r
- * for microcontrollers - completely free of charge! *\r
- * *\r
- * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
- * *\r
- * Thank you for using FreeRTOS, and thank you for your support! *\r
- * *\r
- ***************************************************************************\r
-\r
-\r
- This file is part of the FreeRTOS distribution.\r
-\r
- FreeRTOS is free software; you can redistribute it and/or modify it under\r
- the terms of the GNU General Public License (version 2) as published by the\r
- Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
- >>>NOTE<<< The modification to the GPL is included to allow you to\r
- distribute a combined work that includes FreeRTOS without being obliged to\r
- provide the source code for proprietary components outside of the FreeRTOS\r
- kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
- WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
- more details. You should have received a copy of the GNU General Public\r
- License and the FreeRTOS license exception along with FreeRTOS; if not it\r
- can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
- by writing to Richard Barry, contact details for whom are available on the\r
- FreeRTOS WEB site.\r
-\r
- 1 tab == 4 spaces!\r
- \r
- ***************************************************************************\r
- * *\r
- * Having a problem? Start by reading the FAQ "My application does *\r
- * not run, what could be wrong? *\r
- * *\r
- * http://www.FreeRTOS.org/FAQHelp.html *\r
- * *\r
- ***************************************************************************\r
-\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
- license and contact details.\r
- \r
- http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
- including FreeRTOS+Trace - an indispensable productivity tool.\r
-\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
- the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
- the SafeRTOS brand: http://www.SafeRTOS.com.\r
-*/\r
-\r
-/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining\r
-all the API functions to use the MPU wrappers. That should only be done when\r
-task.h is included from an application file. */\r
-#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
-#include "FreeRTOS.h"\r
-#include "task.h"\r
-#include "queue.h"\r
-#include "timers.h"\r
-\r
-#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
-\r
-/* This entire source file will be skipped if the application is not configured\r
-to include software timer functionality. This #if is closed at the very bottom\r
-of this file. If you want to include software timer functionality then ensure\r
-configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */\r
-#if ( configUSE_TIMERS == 1 )\r
-\r
-/* Misc definitions. */\r
-#define tmrNO_DELAY ( portTickType ) 0U\r
-\r
-/* The definition of the timers themselves. */\r
-typedef struct tmrTimerControl\r
-{\r
- const signed char *pcTimerName; /*<< Text name. This is not used by the kernel, it is included simply to make debugging easier. */\r
- xListItem xTimerListItem; /*<< Standard linked list item as used by all kernel features for event management. */\r
- portTickType xTimerPeriodInTicks;/*<< How quickly and often the timer expires. */\r
- unsigned portBASE_TYPE uxAutoReload; /*<< Set to pdTRUE if the timer should be automatically restarted once expired. Set to pdFALSE if the timer is, in effect, a one shot timer. */\r
- void *pvTimerID; /*<< An ID to identify the timer. This allows the timer to be identified when the same callback is used for multiple timers. */\r
- tmrTIMER_CALLBACK pxCallbackFunction; /*<< The function that will be called when the timer expires. */\r
-} xTIMER;\r
-\r
-/* The definition of messages that can be sent and received on the timer\r
-queue. */\r
-typedef struct tmrTimerQueueMessage\r
-{\r
- portBASE_TYPE xMessageID; /*<< The command being sent to the timer service task. */\r
- portTickType xMessageValue; /*<< An optional value used by a subset of commands, for example, when changing the period of a timer. */\r
- xTIMER * pxTimer; /*<< The timer to which the command will be applied. */\r
-} xTIMER_MESSAGE;\r
-\r
-\r
-/* The list in which active timers are stored. Timers are referenced in expire\r
-time order, with the nearest expiry time at the front of the list. Only the\r
-timer service task is allowed to access xActiveTimerList. */\r
-PRIVILEGED_DATA static xList xActiveTimerList1;\r
-PRIVILEGED_DATA static xList xActiveTimerList2;\r
-PRIVILEGED_DATA static xList *pxCurrentTimerList;\r
-PRIVILEGED_DATA static xList *pxOverflowTimerList;\r
-\r
-/* A queue that is used to send commands to the timer service task. */\r
-PRIVILEGED_DATA static xQueueHandle xTimerQueue = NULL;\r
-\r
-#if ( INCLUDE_xTimerGetTimerDaemonTaskHandle == 1 )\r
- \r
- PRIVILEGED_DATA static xTaskHandle xTimerTaskHandle = NULL;\r
- \r
-#endif\r
-\r
-/*-----------------------------------------------------------*/\r
-\r
-/*\r
- * Initialise the infrastructure used by the timer service task if it has not\r
- * been initialised already.\r
- */\r
-static void prvCheckForValidListAndQueue( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * The timer service task (daemon). Timer functionality is controlled by this\r
- * task. Other tasks communicate with the timer service task using the\r
- * xTimerQueue queue.\r
- */\r
-static void prvTimerTask( void *pvParameters ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Called by the timer service task to interpret and process a command it\r
- * received on the timer queue.\r
- */\r
-static void prvProcessReceivedCommands( void ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Insert the timer into either xActiveTimerList1, or xActiveTimerList2,\r
- * depending on if the expire time causes a timer counter overflow.\r
- */\r
-static portBASE_TYPE prvInsertTimerInActiveList( xTIMER *pxTimer, portTickType xNextExpiryTime, portTickType xTimeNow, portTickType xCommandTime ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * An active timer has reached its expire time. Reload the timer if it is an\r
- * auto reload timer, then call its callback.\r
- */\r
-static void prvProcessExpiredTimer( portTickType xNextExpireTime, portTickType xTimeNow ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * The tick count has overflowed. Switch the timer lists after ensuring the\r
- * current timer list does not still reference some timers.\r
- */\r
-static void prvSwitchTimerLists( portTickType xLastTime ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * Obtain the current tick count, setting *pxTimerListsWereSwitched to pdTRUE\r
- * if a tick count overflow occurred since prvSampleTimeNow() was last called.\r
- */\r
-static portTickType prvSampleTimeNow( portBASE_TYPE *pxTimerListsWereSwitched ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * If the timer list contains any active timers then return the expire time of\r
- * the timer that will expire first and set *pxListWasEmpty to false. If the\r
- * timer list does not contain any timers then return 0 and set *pxListWasEmpty\r
- * to pdTRUE.\r
- */\r
-static portTickType prvGetNextExpireTime( portBASE_TYPE *pxListWasEmpty ) PRIVILEGED_FUNCTION;\r
-\r
-/*\r
- * If a timer has expired, process it. Otherwise, block the timer service task\r
- * until either a timer does expire or a command is received.\r
- */\r
-static void prvProcessTimerOrBlockTask( portTickType xNextExpireTime, portBASE_TYPE xListWasEmpty ) PRIVILEGED_FUNCTION;\r
-\r
-/*-----------------------------------------------------------*/\r
-\r
-portBASE_TYPE xTimerCreateTimerTask( void )\r
-{\r
-portBASE_TYPE xReturn = pdFAIL;\r
-\r
- /* This function is called when the scheduler is started if\r
- configUSE_TIMERS is set to 1. Check that the infrastructure used by the\r
- timer service task has been created/initialised. If timers have already\r
- been created then the initialisation will already have been performed. */\r
- prvCheckForValidListAndQueue();\r
-\r
- if( xTimerQueue != NULL )\r
- {\r
- #if ( INCLUDE_xTimerGetTimerDaemonTaskHandle == 1 )\r
- {\r
- /* Create the timer task, storing its handle in xTimerTaskHandle so\r
- it can be returned by the xTimerGetTimerDaemonTaskHandle() function. */\r
- xReturn = xTaskCreate( prvTimerTask, ( const signed char * ) "Tmr Svc", ( unsigned short ) configTIMER_TASK_STACK_DEPTH, NULL, ( unsigned portBASE_TYPE ) configTIMER_TASK_PRIORITY, &xTimerTaskHandle ); \r
- }\r
- #else\r
- {\r
- /* Create the timer task without storing its handle. */\r
- xReturn = xTaskCreate( prvTimerTask, ( const signed char * ) "Tmr Svc", ( unsigned short ) configTIMER_TASK_STACK_DEPTH, NULL, ( unsigned portBASE_TYPE ) configTIMER_TASK_PRIORITY, NULL);\r
- }\r
- #endif\r
- }\r
-\r
- configASSERT( xReturn );\r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-xTimerHandle xTimerCreate( const signed char *pcTimerName, portTickType xTimerPeriodInTicks, unsigned portBASE_TYPE uxAutoReload, void *pvTimerID, tmrTIMER_CALLBACK pxCallbackFunction )\r
-{\r
-xTIMER *pxNewTimer;\r
-\r
- /* Allocate the timer structure. */\r
- if( xTimerPeriodInTicks == ( portTickType ) 0U )\r
- {\r
- pxNewTimer = NULL;\r
- configASSERT( ( xTimerPeriodInTicks > 0 ) );\r
- }\r
- else\r
- {\r
- pxNewTimer = ( xTIMER * ) pvPortMalloc( sizeof( xTIMER ) );\r
- if( pxNewTimer != NULL )\r
- {\r
- /* Ensure the infrastructure used by the timer service task has been\r
- created/initialised. */\r
- prvCheckForValidListAndQueue();\r
- \r
- /* Initialise the timer structure members using the function parameters. */\r
- pxNewTimer->pcTimerName = pcTimerName;\r
- pxNewTimer->xTimerPeriodInTicks = xTimerPeriodInTicks;\r
- pxNewTimer->uxAutoReload = uxAutoReload;\r
- pxNewTimer->pvTimerID = pvTimerID;\r
- pxNewTimer->pxCallbackFunction = pxCallbackFunction;\r
- vListInitialiseItem( &( pxNewTimer->xTimerListItem ) );\r
- \r
- traceTIMER_CREATE( pxNewTimer );\r
- }\r
- else\r
- {\r
- traceTIMER_CREATE_FAILED();\r
- }\r
- }\r
- \r
- return ( xTimerHandle ) pxNewTimer;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-portBASE_TYPE xTimerGenericCommand( xTimerHandle xTimer, portBASE_TYPE xCommandID, portTickType xOptionalValue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portTickType xBlockTime )\r
-{\r
-portBASE_TYPE xReturn = pdFAIL;\r
-xTIMER_MESSAGE xMessage;\r
-\r
- /* Send a message to the timer service task to perform a particular action\r
- on a particular timer definition. */\r
- if( xTimerQueue != NULL )\r
- {\r
- /* Send a command to the timer service task to start the xTimer timer. */\r
- xMessage.xMessageID = xCommandID;\r
- xMessage.xMessageValue = xOptionalValue;\r
- xMessage.pxTimer = ( xTIMER * ) xTimer;\r
-\r
- if( pxHigherPriorityTaskWoken == NULL )\r
- {\r
- if( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )\r
- {\r
- xReturn = xQueueSendToBack( xTimerQueue, &xMessage, xBlockTime );\r
- }\r
- else\r
- {\r
- xReturn = xQueueSendToBack( xTimerQueue, &xMessage, tmrNO_DELAY );\r
- }\r
- }\r
- else\r
- {\r
- xReturn = xQueueSendToBackFromISR( xTimerQueue, &xMessage, pxHigherPriorityTaskWoken );\r
- }\r
- \r
- traceTIMER_COMMAND_SEND( xTimer, xCommandID, xOptionalValue, xReturn );\r
- }\r
- \r
- return xReturn;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if ( INCLUDE_xTimerGetTimerDaemonTaskHandle == 1 )\r
-\r
- xTaskHandle xTimerGetTimerDaemonTaskHandle( void )\r
- {\r
- /* If xTimerGetTimerDaemonTaskHandle() is called before the scheduler has been\r
- started, then xTimerTaskHandle will be NULL. */\r
- configASSERT( ( xTimerTaskHandle != NULL ) );\r
- return xTimerTaskHandle;\r
- }\r
- \r
-#endif\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvProcessExpiredTimer( portTickType xNextExpireTime, portTickType xTimeNow )\r
-{\r
-xTIMER *pxTimer;\r
-portBASE_TYPE xResult;\r
-\r
- /* Remove the timer from the list of active timers. A check has already\r
- been performed to ensure the list is not empty. */\r
- pxTimer = ( xTIMER * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );\r
- vListRemove( &( pxTimer->xTimerListItem ) );\r
- traceTIMER_EXPIRED( pxTimer );\r
-\r
- /* If the timer is an auto reload timer then calculate the next\r
- expiry time and re-insert the timer in the list of active timers. */\r
- if( pxTimer->uxAutoReload == ( unsigned portBASE_TYPE ) pdTRUE )\r
- {\r
- /* This is the only time a timer is inserted into a list using\r
- a time relative to anything other than the current time. It\r
- will therefore be inserted into the correct list relative to\r
- the time this task thinks it is now, even if a command to\r
- switch lists due to a tick count overflow is already waiting in\r
- the timer queue. */\r
- if( prvInsertTimerInActiveList( pxTimer, ( xNextExpireTime + pxTimer->xTimerPeriodInTicks ), xTimeNow, xNextExpireTime ) == pdTRUE )\r
- {\r
- /* The timer expired before it was added to the active timer\r
- list. Reload it now. */\r
- xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START, xNextExpireTime, NULL, tmrNO_DELAY );\r
- configASSERT( xResult );\r
- ( void ) xResult;\r
- }\r
- }\r
-\r
- /* Call the timer callback. */\r
- pxTimer->pxCallbackFunction( ( xTimerHandle ) pxTimer );\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvTimerTask( void *pvParameters )\r
-{\r
-portTickType xNextExpireTime;\r
-portBASE_TYPE xListWasEmpty;\r
-\r
- /* Just to avoid compiler warnings. */\r
- ( void ) pvParameters;\r
-\r
- for( ;; )\r
- {\r
- /* Query the timers list to see if it contains any timers, and if so,\r
- obtain the time at which the next timer will expire. */\r
- xNextExpireTime = prvGetNextExpireTime( &xListWasEmpty );\r
-\r
- /* If a timer has expired, process it. Otherwise, block this task\r
- until either a timer does expire, or a command is received. */\r
- prvProcessTimerOrBlockTask( xNextExpireTime, xListWasEmpty );\r
- \r
- /* Empty the command queue. */\r
- prvProcessReceivedCommands(); \r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvProcessTimerOrBlockTask( portTickType xNextExpireTime, portBASE_TYPE xListWasEmpty )\r
-{\r
-portTickType xTimeNow;\r
-portBASE_TYPE xTimerListsWereSwitched;\r
-\r
- vTaskSuspendAll();\r
- {\r
- /* Obtain the time now to make an assessment as to whether the timer\r
- has expired or not. If obtaining the time causes the lists to switch\r
- then don't process this timer as any timers that remained in the list\r
- when the lists were switched will have been processed within the\r
- prvSampelTimeNow() function. */\r
- xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );\r
- if( xTimerListsWereSwitched == pdFALSE )\r
- {\r
- /* The tick count has not overflowed, has the timer expired? */\r
- if( ( xListWasEmpty == pdFALSE ) && ( xNextExpireTime <= xTimeNow ) )\r
- {\r
- xTaskResumeAll();\r
- prvProcessExpiredTimer( xNextExpireTime, xTimeNow );\r
- }\r
- else\r
- {\r
- /* The tick count has not overflowed, and the next expire\r
- time has not been reached yet. This task should therefore\r
- block to wait for the next expire time or a command to be\r
- received - whichever comes first. The following line cannot\r
- be reached unless xNextExpireTime > xTimeNow, except in the\r
- case when the current timer list is empty. */\r
- vQueueWaitForMessageRestricted( xTimerQueue, ( xNextExpireTime - xTimeNow ) );\r
-\r
- if( xTaskResumeAll() == pdFALSE )\r
- {\r
- /* Yield to wait for either a command to arrive, or the block time\r
- to expire. If a command arrived between the critical section being\r
- exited and this yield then the yield will not cause the task\r
- to block. */\r
- portYIELD_WITHIN_API();\r
- }\r
- }\r
- }\r
- else\r
- {\r
- xTaskResumeAll();\r
- }\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static portTickType prvGetNextExpireTime( portBASE_TYPE *pxListWasEmpty )\r
-{\r
-portTickType xNextExpireTime;\r
-\r
- /* Timers are listed in expiry time order, with the head of the list\r
- referencing the task that will expire first. Obtain the time at which\r
- the timer with the nearest expiry time will expire. If there are no\r
- active timers then just set the next expire time to 0. That will cause\r
- this task to unblock when the tick count overflows, at which point the\r
- timer lists will be switched and the next expiry time can be\r
- re-assessed. */\r
- *pxListWasEmpty = listLIST_IS_EMPTY( pxCurrentTimerList );\r
- if( *pxListWasEmpty == pdFALSE )\r
- {\r
- xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );\r
- }\r
- else\r
- {\r
- /* Ensure the task unblocks when the tick count rolls over. */\r
- xNextExpireTime = ( portTickType ) 0U;\r
- }\r
-\r
- return xNextExpireTime;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static portTickType prvSampleTimeNow( portBASE_TYPE *pxTimerListsWereSwitched )\r
-{\r
-portTickType xTimeNow;\r
-static portTickType xLastTime = ( portTickType ) 0U;\r
-\r
- xTimeNow = xTaskGetTickCount();\r
- \r
- if( xTimeNow < xLastTime )\r
- {\r
- prvSwitchTimerLists( xLastTime );\r
- *pxTimerListsWereSwitched = pdTRUE;\r
- }\r
- else\r
- {\r
- *pxTimerListsWereSwitched = pdFALSE;\r
- }\r
- \r
- xLastTime = xTimeNow;\r
- \r
- return xTimeNow;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static portBASE_TYPE prvInsertTimerInActiveList( xTIMER *pxTimer, portTickType xNextExpiryTime, portTickType xTimeNow, portTickType xCommandTime )\r
-{\r
-portBASE_TYPE xProcessTimerNow = pdFALSE;\r
-\r
- listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xNextExpiryTime );\r
- listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );\r
- \r
- if( xNextExpiryTime <= xTimeNow )\r
- {\r
- /* Has the expiry time elapsed between the command to start/reset a\r
- timer was issued, and the time the command was processed? */\r
- if( ( ( portTickType ) ( xTimeNow - xCommandTime ) ) >= pxTimer->xTimerPeriodInTicks )\r
- {\r
- /* The time between a command being issued and the command being\r
- processed actually exceeds the timers period. */\r
- xProcessTimerNow = pdTRUE;\r
- }\r
- else\r
- {\r
- vListInsert( pxOverflowTimerList, &( pxTimer->xTimerListItem ) );\r
- }\r
- }\r
- else\r
- {\r
- if( ( xTimeNow < xCommandTime ) && ( xNextExpiryTime >= xCommandTime ) )\r
- {\r
- /* If, since the command was issued, the tick count has overflowed\r
- but the expiry time has not, then the timer must have already passed\r
- its expiry time and should be processed immediately. */\r
- xProcessTimerNow = pdTRUE;\r
- }\r
- else\r
- {\r
- vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );\r
- }\r
- }\r
-\r
- return xProcessTimerNow;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvProcessReceivedCommands( void )\r
-{\r
-xTIMER_MESSAGE xMessage;\r
-xTIMER *pxTimer;\r
-portBASE_TYPE xTimerListsWereSwitched, xResult;\r
-portTickType xTimeNow;\r
-\r
- /* In this case the xTimerListsWereSwitched parameter is not used, but it\r
- must be present in the function call. */\r
- xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );\r
-\r
- while( xQueueReceive( xTimerQueue, &xMessage, tmrNO_DELAY ) != pdFAIL )\r
- {\r
- pxTimer = xMessage.pxTimer;\r
-\r
- /* Is the timer already in a list of active timers? When the command\r
- is trmCOMMAND_PROCESS_TIMER_OVERFLOW, the timer will be NULL as the\r
- command is to the task rather than to an individual timer. */\r
- if( pxTimer != NULL )\r
- {\r
- if( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) == pdFALSE )\r
- {\r
- /* The timer is in a list, remove it. */\r
- vListRemove( &( pxTimer->xTimerListItem ) );\r
- }\r
- }\r
-\r
- traceTIMER_COMMAND_RECEIVED( pxTimer, xMessage.xMessageID, xMessage.xMessageValue );\r
- \r
- switch( xMessage.xMessageID )\r
- {\r
- case tmrCOMMAND_START : \r
- /* Start or restart a timer. */\r
- if( prvInsertTimerInActiveList( pxTimer, xMessage.xMessageValue + pxTimer->xTimerPeriodInTicks, xTimeNow, xMessage.xMessageValue ) == pdTRUE )\r
- {\r
- /* The timer expired before it was added to the active timer\r
- list. Process it now. */\r
- pxTimer->pxCallbackFunction( ( xTimerHandle ) pxTimer );\r
-\r
- if( pxTimer->uxAutoReload == ( unsigned portBASE_TYPE ) pdTRUE )\r
- {\r
- xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START, xMessage.xMessageValue + pxTimer->xTimerPeriodInTicks, NULL, tmrNO_DELAY );\r
- configASSERT( xResult );\r
- ( void ) xResult;\r
- }\r
- }\r
- break;\r
-\r
- case tmrCOMMAND_STOP : \r
- /* The timer has already been removed from the active list.\r
- There is nothing to do here. */\r
- break;\r
-\r
- case tmrCOMMAND_CHANGE_PERIOD :\r
- pxTimer->xTimerPeriodInTicks = xMessage.xMessageValue;\r
- configASSERT( ( pxTimer->xTimerPeriodInTicks > 0 ) );\r
- prvInsertTimerInActiveList( pxTimer, ( xTimeNow + pxTimer->xTimerPeriodInTicks ), xTimeNow, xTimeNow );\r
- break;\r
-\r
- case tmrCOMMAND_DELETE :\r
- /* The timer has already been removed from the active list,\r
- just free up the memory. */\r
- vPortFree( pxTimer );\r
- break;\r
-\r
- default : \r
- /* Don't expect to get here. */\r
- break;\r
- }\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvSwitchTimerLists( portTickType xLastTime )\r
-{\r
-portTickType xNextExpireTime, xReloadTime;\r
-xList *pxTemp;\r
-xTIMER *pxTimer;\r
-portBASE_TYPE xResult;\r
-\r
- /* Remove compiler warnings if configASSERT() is not defined. */\r
- ( void ) xLastTime;\r
- \r
- /* The tick count has overflowed. The timer lists must be switched.\r
- If there are any timers still referenced from the current timer list\r
- then they must have expired and should be processed before the lists\r
- are switched. */\r
- while( listLIST_IS_EMPTY( pxCurrentTimerList ) == pdFALSE )\r
- {\r
- xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );\r
-\r
- /* Remove the timer from the list. */\r
- pxTimer = ( xTIMER * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );\r
- vListRemove( &( pxTimer->xTimerListItem ) );\r
-\r
- /* Execute its callback, then send a command to restart the timer if\r
- it is an auto-reload timer. It cannot be restarted here as the lists\r
- have not yet been switched. */\r
- pxTimer->pxCallbackFunction( ( xTimerHandle ) pxTimer );\r
-\r
- if( pxTimer->uxAutoReload == ( unsigned portBASE_TYPE ) pdTRUE )\r
- {\r
- /* Calculate the reload value, and if the reload value results in\r
- the timer going into the same timer list then it has already expired\r
- and the timer should be re-inserted into the current list so it is\r
- processed again within this loop. Otherwise a command should be sent\r
- to restart the timer to ensure it is only inserted into a list after\r
- the lists have been swapped. */\r
- xReloadTime = ( xNextExpireTime + pxTimer->xTimerPeriodInTicks );\r
- if( xReloadTime > xNextExpireTime )\r
- {\r
- listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xReloadTime );\r
- listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );\r
- vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );\r
- }\r
- else\r
- {\r
- xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START, xNextExpireTime, NULL, tmrNO_DELAY );\r
- configASSERT( xResult );\r
- ( void ) xResult;\r
- }\r
- }\r
- }\r
-\r
- pxTemp = pxCurrentTimerList;\r
- pxCurrentTimerList = pxOverflowTimerList;\r
- pxOverflowTimerList = pxTemp;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvCheckForValidListAndQueue( void )\r
-{\r
- /* Check that the list from which active timers are referenced, and the\r
- queue used to communicate with the timer service, have been\r
- initialised. */\r
- taskENTER_CRITICAL();\r
- {\r
- if( xTimerQueue == NULL )\r
- {\r
- vListInitialise( &xActiveTimerList1 );\r
- vListInitialise( &xActiveTimerList2 );\r
- pxCurrentTimerList = &xActiveTimerList1;\r
- pxOverflowTimerList = &xActiveTimerList2;\r
- xTimerQueue = xQueueCreate( ( unsigned portBASE_TYPE ) configTIMER_QUEUE_LENGTH, sizeof( xTIMER_MESSAGE ) );\r
- }\r
- }\r
- taskEXIT_CRITICAL();\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-portBASE_TYPE xTimerIsTimerActive( xTimerHandle xTimer )\r
-{\r
-portBASE_TYPE xTimerIsInActiveList;\r
-xTIMER *pxTimer = ( xTIMER * ) xTimer;\r
-\r
- /* Is the timer in the list of active timers? */\r
- taskENTER_CRITICAL();\r
- {\r
- /* Checking to see if it is in the NULL list in effect checks to see if\r
- it is referenced from either the current or the overflow timer lists in\r
- one go, but the logic has to be reversed, hence the '!'. */\r
- xTimerIsInActiveList = !( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) );\r
- }\r
- taskEXIT_CRITICAL();\r
-\r
- return xTimerIsInActiveList;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-void *pvTimerGetTimerID( xTimerHandle xTimer )\r
-{\r
-xTIMER *pxTimer = ( xTIMER * ) xTimer;\r
-\r
- return pxTimer->pvTimerID;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-/* This entire source file will be skipped if the application is not configured\r
-to include software timer functionality. If you want to include software timer\r
-functionality then ensure configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */\r
-#endif /* configUSE_TIMERS == 1 */\r
* executed prior to this project being built. Once it has been executed \r
* remove the #error line below.\r
*/\r
-#error Ensure CreateProjectDirectoryStructure.bat has been executed before building. See comment immediately above.\r
+//#error Ensure CreateProjectDirectoryStructure.bat has been executed before building. See comment immediately above.\r
\r
/*-----------------------------------------------------------\r
* Application specific definitions.\r
\r
void vParTestInitialise( void )\r
{\r
-long l;\r
+unsigned long ul;\r
\r
for( l = 0; l < partestNUM_LEDS; l++ )\r
{\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+ \r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+#ifndef INC_FREERTOS_H\r
+#define INC_FREERTOS_H\r
+\r
+\r
+/*\r
+ * Include the generic headers required for the FreeRTOS port being used.\r
+ */\r
+#include <stddef.h>\r
+\r
+/* Basic FreeRTOS definitions. */\r
+#include "projdefs.h"\r
+\r
+/* Application specific configuration options. */\r
+#include "FreeRTOSConfig.h"\r
+\r
+/* Definitions specific to the port being used. */\r
+#include "portable.h"\r
+\r
+\r
+/* Defines the prototype to which the application task hook function must\r
+conform. */\r
+typedef portBASE_TYPE (*pdTASK_HOOK_CODE)( void * );\r
+\r
+\r
+\r
+\r
+\r
+/*\r
+ * Check all the required application specific macros have been defined.\r
+ * These macros are application specific and (as downloaded) are defined\r
+ * within FreeRTOSConfig.h.\r
+ */\r
+\r
+#ifndef configUSE_PREEMPTION\r
+ #error Missing definition: configUSE_PREEMPTION should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef configUSE_IDLE_HOOK\r
+ #error Missing definition: configUSE_IDLE_HOOK should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef configUSE_TICK_HOOK\r
+ #error Missing definition: configUSE_TICK_HOOK should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef configUSE_CO_ROUTINES\r
+ #error Missing definition: configUSE_CO_ROUTINES should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef INCLUDE_vTaskPrioritySet\r
+ #error Missing definition: INCLUDE_vTaskPrioritySet should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef INCLUDE_uxTaskPriorityGet\r
+ #error Missing definition: INCLUDE_uxTaskPriorityGet should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef INCLUDE_vTaskDelete \r
+ #error Missing definition: INCLUDE_vTaskDelete should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef INCLUDE_vTaskSuspend \r
+ #error Missing definition: INCLUDE_vTaskSuspend should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef INCLUDE_vTaskDelayUntil\r
+ #error Missing definition: INCLUDE_vTaskDelayUntil should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef INCLUDE_vTaskDelay\r
+ #error Missing definition: INCLUDE_vTaskDelay should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef configUSE_16_BIT_TICKS\r
+ #error Missing definition: configUSE_16_BIT_TICKS should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.\r
+#endif\r
+\r
+#ifndef INCLUDE_xTaskGetIdleTaskHandle\r
+ #define INCLUDE_xTaskGetIdleTaskHandle 0\r
+#endif\r
+\r
+#ifndef INCLUDE_xTimerGetTimerDaemonTaskHandle\r
+ #define INCLUDE_xTimerGetTimerDaemonTaskHandle 0\r
+#endif\r
+\r
+#ifndef INCLUDE_xQueueGetMutexHolder\r
+ #define INCLUDE_xQueueGetMutexHolder 0\r
+#endif\r
+\r
+#ifndef INCLUDE_pcTaskGetTaskName\r
+ #define INCLUDE_pcTaskGetTaskName 0\r
+#endif\r
+\r
+#ifndef configUSE_APPLICATION_TASK_TAG\r
+ #define configUSE_APPLICATION_TASK_TAG 0\r
+#endif\r
+\r
+#ifndef INCLUDE_uxTaskGetStackHighWaterMark\r
+ #define INCLUDE_uxTaskGetStackHighWaterMark 0\r
+#endif\r
+\r
+#ifndef configUSE_RECURSIVE_MUTEXES\r
+ #define configUSE_RECURSIVE_MUTEXES 0\r
+#endif\r
+\r
+#ifndef configUSE_MUTEXES\r
+ #define configUSE_MUTEXES 0\r
+#endif\r
+\r
+#ifndef configUSE_TIMERS\r
+ #define configUSE_TIMERS 0\r
+#endif\r
+\r
+#ifndef configUSE_COUNTING_SEMAPHORES\r
+ #define configUSE_COUNTING_SEMAPHORES 0\r
+#endif\r
+\r
+#ifndef configUSE_ALTERNATIVE_API\r
+ #define configUSE_ALTERNATIVE_API 0\r
+#endif\r
+\r
+#ifndef portCRITICAL_NESTING_IN_TCB\r
+ #define portCRITICAL_NESTING_IN_TCB 0\r
+#endif\r
+\r
+#ifndef configMAX_TASK_NAME_LEN\r
+ #define configMAX_TASK_NAME_LEN 16\r
+#endif\r
+\r
+#ifndef configIDLE_SHOULD_YIELD\r
+ #define configIDLE_SHOULD_YIELD 1\r
+#endif\r
+\r
+#if configMAX_TASK_NAME_LEN < 1\r
+ #error configMAX_TASK_NAME_LEN must be set to a minimum of 1 in FreeRTOSConfig.h\r
+#endif\r
+\r
+#ifndef INCLUDE_xTaskResumeFromISR\r
+ #define INCLUDE_xTaskResumeFromISR 1\r
+#endif\r
+\r
+#ifndef configASSERT\r
+ #define configASSERT( x )\r
+#endif\r
+\r
+#ifndef portALIGNMENT_ASSERT_pxCurrentTCB\r
+ #define portALIGNMENT_ASSERT_pxCurrentTCB configASSERT\r
+#endif\r
+\r
+/* The timers module relies on xTaskGetSchedulerState(). */\r
+#if configUSE_TIMERS == 1\r
+\r
+ #ifndef configTIMER_TASK_PRIORITY\r
+ #error If configUSE_TIMERS is set to 1 then configTIMER_TASK_PRIORITY must also be defined.\r
+ #endif /* configTIMER_TASK_PRIORITY */\r
+\r
+ #ifndef configTIMER_QUEUE_LENGTH\r
+ #error If configUSE_TIMERS is set to 1 then configTIMER_QUEUE_LENGTH must also be defined.\r
+ #endif /* configTIMER_QUEUE_LENGTH */\r
+\r
+ #ifndef configTIMER_TASK_STACK_DEPTH\r
+ #error If configUSE_TIMERS is set to 1 then configTIMER_TASK_STACK_DEPTH must also be defined.\r
+ #endif /* configTIMER_TASK_STACK_DEPTH */\r
+\r
+#endif /* configUSE_TIMERS */\r
+\r
+#ifndef INCLUDE_xTaskGetSchedulerState\r
+ #define INCLUDE_xTaskGetSchedulerState 0\r
+#endif\r
+\r
+#ifndef INCLUDE_xTaskGetCurrentTaskHandle\r
+ #define INCLUDE_xTaskGetCurrentTaskHandle 0\r
+#endif\r
+\r
+\r
+#ifndef portSET_INTERRUPT_MASK_FROM_ISR\r
+ #define portSET_INTERRUPT_MASK_FROM_ISR() 0\r
+#endif\r
+\r
+#ifndef portCLEAR_INTERRUPT_MASK_FROM_ISR\r
+ #define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue ) ( void ) uxSavedStatusValue\r
+#endif\r
+\r
+#ifndef portCLEAN_UP_TCB\r
+ #define portCLEAN_UP_TCB( pxTCB ) ( void ) pxTCB\r
+#endif\r
+\r
+#ifndef portSETUP_TCB\r
+ #define portSETUP_TCB( pxTCB ) ( void ) pxTCB\r
+#endif\r
+\r
+#ifndef configQUEUE_REGISTRY_SIZE\r
+ #define configQUEUE_REGISTRY_SIZE 0U\r
+#endif\r
+\r
+#if ( configQUEUE_REGISTRY_SIZE < 1 )\r
+ #define vQueueAddToRegistry( xQueue, pcName )\r
+ #define vQueueUnregisterQueue( xQueue )\r
+#endif\r
+\r
+#ifndef portPOINTER_SIZE_TYPE\r
+ #define portPOINTER_SIZE_TYPE unsigned long\r
+#endif\r
+\r
+/* Remove any unused trace macros. */\r
+#ifndef traceSTART\r
+ /* Used to perform any necessary initialisation - for example, open a file\r
+ into which trace is to be written. */\r
+ #define traceSTART()\r
+#endif\r
+\r
+#ifndef traceEND\r
+ /* Use to close a trace, for example close a file into which trace has been\r
+ written. */\r
+ #define traceEND()\r
+#endif\r
+\r
+#ifndef traceTASK_SWITCHED_IN\r
+ /* Called after a task has been selected to run. pxCurrentTCB holds a pointer\r
+ to the task control block of the selected task. */\r
+ #define traceTASK_SWITCHED_IN()\r
+#endif\r
+\r
+#ifndef traceTASK_SWITCHED_OUT\r
+ /* Called before a task has been selected to run. pxCurrentTCB holds a pointer\r
+ to the task control block of the task being switched out. */\r
+ #define traceTASK_SWITCHED_OUT()\r
+#endif\r
+\r
+#ifndef traceTASK_PRIORITY_INHERIT\r
+ /* Called when a task attempts to take a mutex that is already held by a\r
+ lower priority task. pxTCBOfMutexHolder is a pointer to the TCB of the task\r
+ that holds the mutex. uxInheritedPriority is the priority the mutex holder\r
+ will inherit (the priority of the task that is attempting to obtain the\r
+ muted. */\r
+ #define traceTASK_PRIORITY_INHERIT( pxTCBOfMutexHolder, uxInheritedPriority )\r
+#endif\r
+\r
+#ifndef traceTASK_PRIORITY_DISINHERIT\r
+ /* Called when a task releases a mutex, the holding of which had resulted in\r
+ the task inheriting the priority of a higher priority task. \r
+ pxTCBOfMutexHolder is a pointer to the TCB of the task that is releasing the\r
+ mutex. uxOriginalPriority is the task's configured (base) priority. */\r
+ #define traceTASK_PRIORITY_DISINHERIT( pxTCBOfMutexHolder, uxOriginalPriority )\r
+#endif\r
+\r
+#ifndef traceBLOCKING_ON_QUEUE_RECEIVE\r
+ /* Task is about to block because it cannot read from a\r
+ queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore\r
+ upon which the read was attempted. pxCurrentTCB points to the TCB of the\r
+ task that attempted the read. */\r
+ #define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue )\r
+#endif\r
+\r
+#ifndef traceBLOCKING_ON_QUEUE_SEND\r
+ /* Task is about to block because it cannot write to a\r
+ queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore\r
+ upon which the write was attempted. pxCurrentTCB points to the TCB of the\r
+ task that attempted the write. */\r
+ #define traceBLOCKING_ON_QUEUE_SEND( pxQueue )\r
+#endif\r
+\r
+#ifndef configCHECK_FOR_STACK_OVERFLOW\r
+ #define configCHECK_FOR_STACK_OVERFLOW 0\r
+#endif\r
+\r
+/* The following event macros are embedded in the kernel API calls. */\r
+\r
+#ifndef traceMOVED_TASK_TO_READY_STATE\r
+ #define traceMOVED_TASK_TO_READY_STATE( pxTCB )\r
+#endif\r
+\r
+#ifndef traceQUEUE_CREATE \r
+ #define traceQUEUE_CREATE( pxNewQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_CREATE_FAILED\r
+ #define traceQUEUE_CREATE_FAILED( ucQueueType )\r
+#endif\r
+\r
+#ifndef traceCREATE_MUTEX\r
+ #define traceCREATE_MUTEX( pxNewQueue )\r
+#endif\r
+\r
+#ifndef traceCREATE_MUTEX_FAILED\r
+ #define traceCREATE_MUTEX_FAILED()\r
+#endif\r
+\r
+#ifndef traceGIVE_MUTEX_RECURSIVE\r
+ #define traceGIVE_MUTEX_RECURSIVE( pxMutex )\r
+#endif\r
+\r
+#ifndef traceGIVE_MUTEX_RECURSIVE_FAILED\r
+ #define traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex )\r
+#endif\r
+\r
+#ifndef traceTAKE_MUTEX_RECURSIVE\r
+ #define traceTAKE_MUTEX_RECURSIVE( pxMutex )\r
+#endif\r
+\r
+#ifndef traceTAKE_MUTEX_RECURSIVE_FAILED\r
+ #define traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex )\r
+#endif\r
+\r
+#ifndef traceCREATE_COUNTING_SEMAPHORE\r
+ #define traceCREATE_COUNTING_SEMAPHORE()\r
+#endif\r
+\r
+#ifndef traceCREATE_COUNTING_SEMAPHORE_FAILED\r
+ #define traceCREATE_COUNTING_SEMAPHORE_FAILED()\r
+#endif\r
+\r
+#ifndef traceQUEUE_SEND\r
+ #define traceQUEUE_SEND( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_SEND_FAILED\r
+ #define traceQUEUE_SEND_FAILED( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_RECEIVE\r
+ #define traceQUEUE_RECEIVE( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_PEEK\r
+ #define traceQUEUE_PEEK( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_RECEIVE_FAILED\r
+ #define traceQUEUE_RECEIVE_FAILED( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_SEND_FROM_ISR\r
+ #define traceQUEUE_SEND_FROM_ISR( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_SEND_FROM_ISR_FAILED\r
+ #define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_RECEIVE_FROM_ISR\r
+ #define traceQUEUE_RECEIVE_FROM_ISR( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_RECEIVE_FROM_ISR_FAILED\r
+ #define traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue )\r
+#endif\r
+\r
+#ifndef traceQUEUE_DELETE\r
+ #define traceQUEUE_DELETE( pxQueue )\r
+#endif\r
+\r
+#ifndef traceTASK_CREATE\r
+ #define traceTASK_CREATE( pxNewTCB )\r
+#endif\r
+\r
+#ifndef traceTASK_CREATE_FAILED\r
+ #define traceTASK_CREATE_FAILED()\r
+#endif\r
+\r
+#ifndef traceTASK_DELETE\r
+ #define traceTASK_DELETE( pxTaskToDelete )\r
+#endif\r
+\r
+#ifndef traceTASK_DELAY_UNTIL\r
+ #define traceTASK_DELAY_UNTIL()\r
+#endif\r
+\r
+#ifndef traceTASK_DELAY\r
+ #define traceTASK_DELAY()\r
+#endif\r
+\r
+#ifndef traceTASK_PRIORITY_SET\r
+ #define traceTASK_PRIORITY_SET( pxTask, uxNewPriority )\r
+#endif\r
+\r
+#ifndef traceTASK_SUSPEND\r
+ #define traceTASK_SUSPEND( pxTaskToSuspend )\r
+#endif\r
+\r
+#ifndef traceTASK_RESUME\r
+ #define traceTASK_RESUME( pxTaskToResume )\r
+#endif\r
+\r
+#ifndef traceTASK_RESUME_FROM_ISR\r
+ #define traceTASK_RESUME_FROM_ISR( pxTaskToResume )\r
+#endif\r
+\r
+#ifndef traceTASK_INCREMENT_TICK\r
+ #define traceTASK_INCREMENT_TICK( xTickCount )\r
+#endif\r
+\r
+#ifndef traceTIMER_CREATE\r
+ #define traceTIMER_CREATE( pxNewTimer )\r
+#endif\r
+\r
+#ifndef traceTIMER_CREATE_FAILED\r
+ #define traceTIMER_CREATE_FAILED()\r
+#endif\r
+\r
+#ifndef traceTIMER_COMMAND_SEND\r
+ #define traceTIMER_COMMAND_SEND( xTimer, xMessageID, xMessageValueValue, xReturn )\r
+#endif\r
+\r
+#ifndef traceTIMER_EXPIRED\r
+ #define traceTIMER_EXPIRED( pxTimer )\r
+#endif\r
+\r
+#ifndef traceTIMER_COMMAND_RECEIVED\r
+ #define traceTIMER_COMMAND_RECEIVED( pxTimer, xMessageID, xMessageValue )\r
+#endif\r
+\r
+#ifndef configGENERATE_RUN_TIME_STATS\r
+ #define configGENERATE_RUN_TIME_STATS 0\r
+#endif\r
+\r
+#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+\r
+ #ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS\r
+ #error If configGENERATE_RUN_TIME_STATS is defined then portCONFIGURE_TIMER_FOR_RUN_TIME_STATS must also be defined. portCONFIGURE_TIMER_FOR_RUN_TIME_STATS should call a port layer function to setup a peripheral timer/counter that can then be used as the run time counter time base.\r
+ #endif /* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS */\r
+\r
+ #ifndef portGET_RUN_TIME_COUNTER_VALUE\r
+ #ifndef portALT_GET_RUN_TIME_COUNTER_VALUE\r
+ #error If configGENERATE_RUN_TIME_STATS is defined then either portGET_RUN_TIME_COUNTER_VALUE or portALT_GET_RUN_TIME_COUNTER_VALUE must also be defined. See the examples provided and the FreeRTOS web site for more information.\r
+ #endif /* portALT_GET_RUN_TIME_COUNTER_VALUE */\r
+ #endif /* portGET_RUN_TIME_COUNTER_VALUE */\r
+\r
+#endif /* configGENERATE_RUN_TIME_STATS */\r
+\r
+#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS\r
+ #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS()\r
+#endif\r
+\r
+#ifndef configUSE_MALLOC_FAILED_HOOK\r
+ #define configUSE_MALLOC_FAILED_HOOK 0\r
+#endif\r
+\r
+#ifndef portPRIVILEGE_BIT\r
+ #define portPRIVILEGE_BIT ( ( unsigned portBASE_TYPE ) 0x00 )\r
+#endif\r
+\r
+#ifndef portYIELD_WITHIN_API\r
+ #define portYIELD_WITHIN_API portYIELD\r
+#endif\r
+\r
+#ifndef pvPortMallocAligned\r
+ #define pvPortMallocAligned( x, puxStackBuffer ) ( ( ( puxStackBuffer ) == NULL ) ? ( pvPortMalloc( ( x ) ) ) : ( puxStackBuffer ) )\r
+#endif\r
+\r
+#ifndef vPortFreeAligned\r
+ #define vPortFreeAligned( pvBlockToFree ) vPortFree( pvBlockToFree )\r
+#endif\r
+\r
+#endif /* INC_FREERTOS_H */\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+#ifndef STACK_MACROS_H\r
+#define STACK_MACROS_H\r
+\r
+/*\r
+ * Call the stack overflow hook function if the stack of the task being swapped\r
+ * out is currently overflowed, or looks like it might have overflowed in the\r
+ * past.\r
+ *\r
+ * Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check\r
+ * the current stack state only - comparing the current top of stack value to\r
+ * the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1\r
+ * will also cause the last few stack bytes to be checked to ensure the value\r
+ * to which the bytes were set when the task was created have not been\r
+ * overwritten. Note this second test does not guarantee that an overflowed\r
+ * stack will always be recognised.\r
+ */\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( configCHECK_FOR_STACK_OVERFLOW == 0 )\r
+\r
+ /* FreeRTOSConfig.h is not set to check for stack overflows. */\r
+ #define taskFIRST_CHECK_FOR_STACK_OVERFLOW()\r
+ #define taskSECOND_CHECK_FOR_STACK_OVERFLOW()\r
+\r
+#endif /* configCHECK_FOR_STACK_OVERFLOW == 0 */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( configCHECK_FOR_STACK_OVERFLOW == 1 )\r
+\r
+ /* FreeRTOSConfig.h is only set to use the first method of\r
+ overflow checking. */\r
+ #define taskSECOND_CHECK_FOR_STACK_OVERFLOW()\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 0 ) && ( portSTACK_GROWTH < 0 ) )\r
+\r
+ /* Only the current stack state is to be checked. */\r
+ #define taskFIRST_CHECK_FOR_STACK_OVERFLOW() \\r
+ { \\r
+ /* Is the currently saved stack pointer within the stack limit? */ \\r
+ if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \\r
+ { \\r
+ vApplicationStackOverflowHook( ( xTaskHandle ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \\r
+ } \\r
+ }\r
+\r
+#endif /* configCHECK_FOR_STACK_OVERFLOW > 0 */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 0 ) && ( portSTACK_GROWTH > 0 ) )\r
+\r
+ /* Only the current stack state is to be checked. */\r
+ #define taskFIRST_CHECK_FOR_STACK_OVERFLOW() \\r
+ { \\r
+ \\r
+ /* Is the currently saved stack pointer within the stack limit? */ \\r
+ if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \\r
+ { \\r
+ vApplicationStackOverflowHook( ( xTaskHandle ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \\r
+ } \\r
+ }\r
+\r
+#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )\r
+\r
+ #define taskSECOND_CHECK_FOR_STACK_OVERFLOW() \\r
+ { \\r
+ static const unsigned char ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \\r
+ \\r
+ \\r
+ /* Has the extremity of the task stack ever been written over? */ \\r
+ if( memcmp( ( void * ) pxCurrentTCB->pxStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \\r
+ { \\r
+ vApplicationStackOverflowHook( ( xTaskHandle ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \\r
+ } \\r
+ }\r
+\r
+#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )\r
+\r
+ #define taskSECOND_CHECK_FOR_STACK_OVERFLOW() \\r
+ { \\r
+ char *pcEndOfStack = ( char * ) pxCurrentTCB->pxEndOfStack; \\r
+ static const unsigned char ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \\r
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \\r
+ \\r
+ \\r
+ pcEndOfStack -= sizeof( ucExpectedStackBytes ); \\r
+ \\r
+ /* Has the extremity of the task stack ever been written over? */ \\r
+ if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \\r
+ { \\r
+ vApplicationStackOverflowHook( ( xTaskHandle ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \\r
+ } \\r
+ }\r
+\r
+#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */\r
+/*-----------------------------------------------------------*/\r
+\r
+#endif /* STACK_MACROS_H */\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+#ifndef CO_ROUTINE_H\r
+#define CO_ROUTINE_H\r
+\r
+#ifndef INC_FREERTOS_H\r
+ #error "include FreeRTOS.h must appear in source files before include croutine.h"\r
+#endif\r
+\r
+#include "list.h"\r
+\r
+#ifdef __cplusplus\r
+extern "C" {\r
+#endif\r
+\r
+/* Used to hide the implementation of the co-routine control block. The\r
+control block structure however has to be included in the header due to\r
+the macro implementation of the co-routine functionality. */\r
+typedef void * xCoRoutineHandle;\r
+\r
+/* Defines the prototype to which co-routine functions must conform. */\r
+typedef void (*crCOROUTINE_CODE)( xCoRoutineHandle, unsigned portBASE_TYPE );\r
+\r
+typedef struct corCoRoutineControlBlock\r
+{\r
+ crCOROUTINE_CODE pxCoRoutineFunction;\r
+ xListItem xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */\r
+ xListItem xEventListItem; /*< List item used to place the CRCB in event lists. */\r
+ unsigned portBASE_TYPE uxPriority; /*< The priority of the co-routine in relation to other co-routines. */\r
+ unsigned portBASE_TYPE uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */\r
+ unsigned short uxState; /*< Used internally by the co-routine implementation. */\r
+} corCRCB; /* Co-routine control block. Note must be identical in size down to uxPriority with tskTCB. */\r
+\r
+/**\r
+ * croutine. h\r
+ *<pre>\r
+ portBASE_TYPE xCoRoutineCreate(\r
+ crCOROUTINE_CODE pxCoRoutineCode,\r
+ unsigned portBASE_TYPE uxPriority,\r
+ unsigned portBASE_TYPE uxIndex\r
+ );</pre>\r
+ *\r
+ * Create a new co-routine and add it to the list of co-routines that are\r
+ * ready to run.\r
+ *\r
+ * @param pxCoRoutineCode Pointer to the co-routine function. Co-routine\r
+ * functions require special syntax - see the co-routine section of the WEB\r
+ * documentation for more information.\r
+ *\r
+ * @param uxPriority The priority with respect to other co-routines at which\r
+ * the co-routine will run.\r
+ *\r
+ * @param uxIndex Used to distinguish between different co-routines that\r
+ * execute the same function. See the example below and the co-routine section\r
+ * of the WEB documentation for further information.\r
+ *\r
+ * @return pdPASS if the co-routine was successfully created and added to a ready\r
+ * list, otherwise an error code defined with ProjDefs.h.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // Co-routine to be created.\r
+ void vFlashCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
+ {\r
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
+ // This may not be necessary for const variables.\r
+ static const char cLedToFlash[ 2 ] = { 5, 6 };\r
+ static const portTickType uxFlashRates[ 2 ] = { 200, 400 };\r
+\r
+ // Must start every co-routine with a call to crSTART();\r
+ crSTART( xHandle );\r
+\r
+ for( ;; )\r
+ {\r
+ // This co-routine just delays for a fixed period, then toggles\r
+ // an LED. Two co-routines are created using this function, so\r
+ // the uxIndex parameter is used to tell the co-routine which\r
+ // LED to flash and how long to delay. This assumes xQueue has\r
+ // already been created.\r
+ vParTestToggleLED( cLedToFlash[ uxIndex ] );\r
+ crDELAY( xHandle, uxFlashRates[ uxIndex ] );\r
+ }\r
+\r
+ // Must end every co-routine with a call to crEND();\r
+ crEND();\r
+ }\r
+\r
+ // Function that creates two co-routines.\r
+ void vOtherFunction( void )\r
+ {\r
+ unsigned char ucParameterToPass;\r
+ xTaskHandle xHandle;\r
+ \r
+ // Create two co-routines at priority 0. The first is given index 0\r
+ // so (from the code above) toggles LED 5 every 200 ticks. The second\r
+ // is given index 1 so toggles LED 6 every 400 ticks.\r
+ for( uxIndex = 0; uxIndex < 2; uxIndex++ )\r
+ {\r
+ xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xCoRoutineCreate xCoRoutineCreate\r
+ * \ingroup Tasks\r
+ */\r
+signed portBASE_TYPE xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, unsigned portBASE_TYPE uxPriority, unsigned portBASE_TYPE uxIndex );\r
+\r
+\r
+/**\r
+ * croutine. h\r
+ *<pre>\r
+ void vCoRoutineSchedule( void );</pre>\r
+ *\r
+ * Run a co-routine.\r
+ *\r
+ * vCoRoutineSchedule() executes the highest priority co-routine that is able\r
+ * to run. The co-routine will execute until it either blocks, yields or is\r
+ * preempted by a task. Co-routines execute cooperatively so one\r
+ * co-routine cannot be preempted by another, but can be preempted by a task.\r
+ *\r
+ * If an application comprises of both tasks and co-routines then\r
+ * vCoRoutineSchedule should be called from the idle task (in an idle task\r
+ * hook).\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // This idle task hook will schedule a co-routine each time it is called.\r
+ // The rest of the idle task will execute between co-routine calls.\r
+ void vApplicationIdleHook( void )\r
+ {\r
+ vCoRoutineSchedule();\r
+ }\r
+\r
+ // Alternatively, if you do not require any other part of the idle task to\r
+ // execute, the idle task hook can call vCoRoutineScheduler() within an\r
+ // infinite loop.\r
+ void vApplicationIdleHook( void )\r
+ {\r
+ for( ;; )\r
+ {\r
+ vCoRoutineSchedule();\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup vCoRoutineSchedule vCoRoutineSchedule\r
+ * \ingroup Tasks\r
+ */\r
+void vCoRoutineSchedule( void );\r
+\r
+/**\r
+ * croutine. h\r
+ * <pre>\r
+ crSTART( xCoRoutineHandle xHandle );</pre>\r
+ *\r
+ * This macro MUST always be called at the start of a co-routine function.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // Co-routine to be created.\r
+ void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
+ {\r
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
+ static long ulAVariable;\r
+\r
+ // Must start every co-routine with a call to crSTART();\r
+ crSTART( xHandle );\r
+\r
+ for( ;; )\r
+ {\r
+ // Co-routine functionality goes here.\r
+ }\r
+\r
+ // Must end every co-routine with a call to crEND();\r
+ crEND();\r
+ }</pre>\r
+ * \defgroup crSTART crSTART\r
+ * \ingroup Tasks\r
+ */\r
+#define crSTART( pxCRCB ) switch( ( ( corCRCB * )( pxCRCB ) )->uxState ) { case 0:\r
+\r
+/**\r
+ * croutine. h\r
+ * <pre>\r
+ crEND();</pre>\r
+ *\r
+ * This macro MUST always be called at the end of a co-routine function.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // Co-routine to be created.\r
+ void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
+ {\r
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
+ static long ulAVariable;\r
+\r
+ // Must start every co-routine with a call to crSTART();\r
+ crSTART( xHandle );\r
+\r
+ for( ;; )\r
+ {\r
+ // Co-routine functionality goes here.\r
+ }\r
+\r
+ // Must end every co-routine with a call to crEND();\r
+ crEND();\r
+ }</pre>\r
+ * \defgroup crSTART crSTART\r
+ * \ingroup Tasks\r
+ */\r
+#define crEND() }\r
+\r
+/*\r
+ * These macros are intended for internal use by the co-routine implementation\r
+ * only. The macros should not be used directly by application writers.\r
+ */\r
+#define crSET_STATE0( xHandle ) ( ( corCRCB * )( xHandle ) )->uxState = (__LINE__ * 2); return; case (__LINE__ * 2):\r
+#define crSET_STATE1( xHandle ) ( ( corCRCB * )( xHandle ) )->uxState = ((__LINE__ * 2)+1); return; case ((__LINE__ * 2)+1):\r
+\r
+/**\r
+ * croutine. h\r
+ *<pre>\r
+ crDELAY( xCoRoutineHandle xHandle, portTickType xTicksToDelay );</pre>\r
+ *\r
+ * Delay a co-routine for a fixed period of time.\r
+ *\r
+ * crDELAY can only be called from the co-routine function itself - not\r
+ * from within a function called by the co-routine function. This is because\r
+ * co-routines do not maintain their own stack.\r
+ *\r
+ * @param xHandle The handle of the co-routine to delay. This is the xHandle\r
+ * parameter of the co-routine function.\r
+ *\r
+ * @param xTickToDelay The number of ticks that the co-routine should delay\r
+ * for. The actual amount of time this equates to is defined by\r
+ * configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_RATE_MS\r
+ * can be used to convert ticks to milliseconds.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // Co-routine to be created.\r
+ void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
+ {\r
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
+ // This may not be necessary for const variables.\r
+ // We are to delay for 200ms.\r
+ static const xTickType xDelayTime = 200 / portTICK_RATE_MS;\r
+\r
+ // Must start every co-routine with a call to crSTART();\r
+ crSTART( xHandle );\r
+\r
+ for( ;; )\r
+ {\r
+ // Delay for 200ms.\r
+ crDELAY( xHandle, xDelayTime );\r
+\r
+ // Do something here.\r
+ }\r
+\r
+ // Must end every co-routine with a call to crEND();\r
+ crEND();\r
+ }</pre>\r
+ * \defgroup crDELAY crDELAY\r
+ * \ingroup Tasks\r
+ */\r
+#define crDELAY( xHandle, xTicksToDelay ) \\r
+ if( ( xTicksToDelay ) > 0 ) \\r
+ { \\r
+ vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \\r
+ } \\r
+ crSET_STATE0( ( xHandle ) );\r
+\r
+/**\r
+ * <pre>\r
+ crQUEUE_SEND(\r
+ xCoRoutineHandle xHandle,\r
+ xQueueHandle pxQueue,\r
+ void *pvItemToQueue,\r
+ portTickType xTicksToWait,\r
+ portBASE_TYPE *pxResult\r
+ )</pre>\r
+ *\r
+ * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine\r
+ * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.\r
+ *\r
+ * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas\r
+ * xQueueSend() and xQueueReceive() can only be used from tasks.\r
+ *\r
+ * crQUEUE_SEND can only be called from the co-routine function itself - not\r
+ * from within a function called by the co-routine function. This is because\r
+ * co-routines do not maintain their own stack.\r
+ *\r
+ * See the co-routine section of the WEB documentation for information on\r
+ * passing data between tasks and co-routines and between ISR's and\r
+ * co-routines.\r
+ *\r
+ * @param xHandle The handle of the calling co-routine. This is the xHandle\r
+ * parameter of the co-routine function.\r
+ *\r
+ * @param pxQueue The handle of the queue on which the data will be posted.\r
+ * The handle is obtained as the return value when the queue is created using\r
+ * the xQueueCreate() API function.\r
+ *\r
+ * @param pvItemToQueue A pointer to the data being posted onto the queue.\r
+ * The number of bytes of each queued item is specified when the queue is\r
+ * created. This number of bytes is copied from pvItemToQueue into the queue\r
+ * itself.\r
+ *\r
+ * @param xTickToDelay The number of ticks that the co-routine should block\r
+ * to wait for space to become available on the queue, should space not be\r
+ * available immediately. The actual amount of time this equates to is defined\r
+ * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant\r
+ * portTICK_RATE_MS can be used to convert ticks to milliseconds (see example\r
+ * below).\r
+ *\r
+ * @param pxResult The variable pointed to by pxResult will be set to pdPASS if\r
+ * data was successfully posted onto the queue, otherwise it will be set to an\r
+ * error defined within ProjDefs.h.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // Co-routine function that blocks for a fixed period then posts a number onto\r
+ // a queue.\r
+ static void prvCoRoutineFlashTask( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
+ {\r
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
+ static portBASE_TYPE xNumberToPost = 0;\r
+ static portBASE_TYPE xResult;\r
+\r
+ // Co-routines must begin with a call to crSTART().\r
+ crSTART( xHandle );\r
+\r
+ for( ;; )\r
+ {\r
+ // This assumes the queue has already been created.\r
+ crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );\r
+\r
+ if( xResult != pdPASS )\r
+ {\r
+ // The message was not posted!\r
+ }\r
+\r
+ // Increment the number to be posted onto the queue.\r
+ xNumberToPost++;\r
+\r
+ // Delay for 100 ticks.\r
+ crDELAY( xHandle, 100 );\r
+ }\r
+\r
+ // Co-routines must end with a call to crEND().\r
+ crEND();\r
+ }</pre>\r
+ * \defgroup crQUEUE_SEND crQUEUE_SEND\r
+ * \ingroup Tasks\r
+ */\r
+#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \\r
+{ \\r
+ *( pxResult ) = xQueueCRSend( ( pxQueue) , ( pvItemToQueue) , ( xTicksToWait ) ); \\r
+ if( *( pxResult ) == errQUEUE_BLOCKED ) \\r
+ { \\r
+ crSET_STATE0( ( xHandle ) ); \\r
+ *pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \\r
+ } \\r
+ if( *pxResult == errQUEUE_YIELD ) \\r
+ { \\r
+ crSET_STATE1( ( xHandle ) ); \\r
+ *pxResult = pdPASS; \\r
+ } \\r
+}\r
+\r
+/**\r
+ * croutine. h\r
+ * <pre>\r
+ crQUEUE_RECEIVE(\r
+ xCoRoutineHandle xHandle,\r
+ xQueueHandle pxQueue,\r
+ void *pvBuffer,\r
+ portTickType xTicksToWait,\r
+ portBASE_TYPE *pxResult\r
+ )</pre>\r
+ *\r
+ * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine\r
+ * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.\r
+ *\r
+ * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas\r
+ * xQueueSend() and xQueueReceive() can only be used from tasks.\r
+ *\r
+ * crQUEUE_RECEIVE can only be called from the co-routine function itself - not\r
+ * from within a function called by the co-routine function. This is because\r
+ * co-routines do not maintain their own stack.\r
+ *\r
+ * See the co-routine section of the WEB documentation for information on\r
+ * passing data between tasks and co-routines and between ISR's and\r
+ * co-routines.\r
+ *\r
+ * @param xHandle The handle of the calling co-routine. This is the xHandle\r
+ * parameter of the co-routine function.\r
+ *\r
+ * @param pxQueue The handle of the queue from which the data will be received.\r
+ * The handle is obtained as the return value when the queue is created using\r
+ * the xQueueCreate() API function.\r
+ *\r
+ * @param pvBuffer The buffer into which the received item is to be copied.\r
+ * The number of bytes of each queued item is specified when the queue is\r
+ * created. This number of bytes is copied into pvBuffer.\r
+ *\r
+ * @param xTickToDelay The number of ticks that the co-routine should block\r
+ * to wait for data to become available from the queue, should data not be\r
+ * available immediately. The actual amount of time this equates to is defined\r
+ * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant\r
+ * portTICK_RATE_MS can be used to convert ticks to milliseconds (see the\r
+ * crQUEUE_SEND example).\r
+ *\r
+ * @param pxResult The variable pointed to by pxResult will be set to pdPASS if\r
+ * data was successfully retrieved from the queue, otherwise it will be set to\r
+ * an error code as defined within ProjDefs.h.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // A co-routine receives the number of an LED to flash from a queue. It\r
+ // blocks on the queue until the number is received.\r
+ static void prvCoRoutineFlashWorkTask( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
+ {\r
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.\r
+ static portBASE_TYPE xResult;\r
+ static unsigned portBASE_TYPE uxLEDToFlash;\r
+\r
+ // All co-routines must start with a call to crSTART().\r
+ crSTART( xHandle );\r
+\r
+ for( ;; )\r
+ {\r
+ // Wait for data to become available on the queue.\r
+ crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );\r
+\r
+ if( xResult == pdPASS )\r
+ {\r
+ // We received the LED to flash - flash it!\r
+ vParTestToggleLED( uxLEDToFlash );\r
+ }\r
+ }\r
+\r
+ crEND();\r
+ }</pre>\r
+ * \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE\r
+ * \ingroup Tasks\r
+ */\r
+#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \\r
+{ \\r
+ *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), ( xTicksToWait ) ); \\r
+ if( *( pxResult ) == errQUEUE_BLOCKED ) \\r
+ { \\r
+ crSET_STATE0( ( xHandle ) ); \\r
+ *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), 0 ); \\r
+ } \\r
+ if( *( pxResult ) == errQUEUE_YIELD ) \\r
+ { \\r
+ crSET_STATE1( ( xHandle ) ); \\r
+ *( pxResult ) = pdPASS; \\r
+ } \\r
+}\r
+\r
+/**\r
+ * croutine. h\r
+ * <pre>\r
+ crQUEUE_SEND_FROM_ISR(\r
+ xQueueHandle pxQueue,\r
+ void *pvItemToQueue,\r
+ portBASE_TYPE xCoRoutinePreviouslyWoken\r
+ )</pre>\r
+ *\r
+ * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the\r
+ * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()\r
+ * functions used by tasks.\r
+ *\r
+ * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to\r
+ * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and\r
+ * xQueueReceiveFromISR() can only be used to pass data between a task and and\r
+ * ISR.\r
+ *\r
+ * crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue\r
+ * that is being used from within a co-routine.\r
+ *\r
+ * See the co-routine section of the WEB documentation for information on\r
+ * passing data between tasks and co-routines and between ISR's and\r
+ * co-routines.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto\r
+ * the same queue multiple times from a single interrupt. The first call\r
+ * should always pass in pdFALSE. Subsequent calls should pass in\r
+ * the value returned from the previous call.\r
+ *\r
+ * @return pdTRUE if a co-routine was woken by posting onto the queue. This is\r
+ * used by the ISR to determine if a context switch may be required following\r
+ * the ISR.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // A co-routine that blocks on a queue waiting for characters to be received.\r
+ static void vReceivingCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
+ {\r
+ char cRxedChar;\r
+ portBASE_TYPE xResult;\r
+\r
+ // All co-routines must start with a call to crSTART().\r
+ crSTART( xHandle );\r
+\r
+ for( ;; )\r
+ {\r
+ // Wait for data to become available on the queue. This assumes the\r
+ // queue xCommsRxQueue has already been created!\r
+ crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );\r
+\r
+ // Was a character received?\r
+ if( xResult == pdPASS )\r
+ {\r
+ // Process the character here.\r
+ }\r
+ }\r
+\r
+ // All co-routines must end with a call to crEND().\r
+ crEND();\r
+ }\r
+\r
+ // An ISR that uses a queue to send characters received on a serial port to\r
+ // a co-routine.\r
+ void vUART_ISR( void )\r
+ {\r
+ char cRxedChar;\r
+ portBASE_TYPE xCRWokenByPost = pdFALSE;\r
+\r
+ // We loop around reading characters until there are none left in the UART.\r
+ while( UART_RX_REG_NOT_EMPTY() )\r
+ {\r
+ // Obtain the character from the UART.\r
+ cRxedChar = UART_RX_REG;\r
+\r
+ // Post the character onto a queue. xCRWokenByPost will be pdFALSE\r
+ // the first time around the loop. If the post causes a co-routine\r
+ // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.\r
+ // In this manner we can ensure that if more than one co-routine is\r
+ // blocked on the queue only one is woken by this ISR no matter how\r
+ // many characters are posted to the queue.\r
+ xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );\r
+ }\r
+ }</pre>\r
+ * \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR\r
+ * \ingroup Tasks\r
+ */\r
+#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )\r
+\r
+\r
+/**\r
+ * croutine. h\r
+ * <pre>\r
+ crQUEUE_SEND_FROM_ISR(\r
+ xQueueHandle pxQueue,\r
+ void *pvBuffer,\r
+ portBASE_TYPE * pxCoRoutineWoken\r
+ )</pre>\r
+ *\r
+ * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the\r
+ * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()\r
+ * functions used by tasks.\r
+ *\r
+ * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to\r
+ * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and\r
+ * xQueueReceiveFromISR() can only be used to pass data between a task and and\r
+ * ISR.\r
+ *\r
+ * crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data\r
+ * from a queue that is being used from within a co-routine (a co-routine\r
+ * posted to the queue).\r
+ *\r
+ * See the co-routine section of the WEB documentation for information on\r
+ * passing data between tasks and co-routines and between ISR's and\r
+ * co-routines.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvBuffer A pointer to a buffer into which the received item will be\r
+ * placed. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from the queue into\r
+ * pvBuffer.\r
+ *\r
+ * @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become\r
+ * available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a\r
+ * co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise\r
+ * *pxCoRoutineWoken will remain unchanged.\r
+ *\r
+ * @return pdTRUE an item was successfully received from the queue, otherwise\r
+ * pdFALSE.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // A co-routine that posts a character to a queue then blocks for a fixed\r
+ // period. The character is incremented each time.\r
+ static void vSendingCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )\r
+ {\r
+ // cChar holds its value while this co-routine is blocked and must therefore\r
+ // be declared static.\r
+ static char cCharToTx = 'a';\r
+ portBASE_TYPE xResult;\r
+\r
+ // All co-routines must start with a call to crSTART().\r
+ crSTART( xHandle );\r
+\r
+ for( ;; )\r
+ {\r
+ // Send the next character to the queue.\r
+ crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );\r
+\r
+ if( xResult == pdPASS )\r
+ {\r
+ // The character was successfully posted to the queue.\r
+ }\r
+ else\r
+ {\r
+ // Could not post the character to the queue.\r
+ }\r
+\r
+ // Enable the UART Tx interrupt to cause an interrupt in this\r
+ // hypothetical UART. The interrupt will obtain the character\r
+ // from the queue and send it.\r
+ ENABLE_RX_INTERRUPT();\r
+\r
+ // Increment to the next character then block for a fixed period.\r
+ // cCharToTx will maintain its value across the delay as it is\r
+ // declared static.\r
+ cCharToTx++;\r
+ if( cCharToTx > 'x' )\r
+ {\r
+ cCharToTx = 'a';\r
+ }\r
+ crDELAY( 100 );\r
+ }\r
+\r
+ // All co-routines must end with a call to crEND().\r
+ crEND();\r
+ }\r
+\r
+ // An ISR that uses a queue to receive characters to send on a UART.\r
+ void vUART_ISR( void )\r
+ {\r
+ char cCharToTx;\r
+ portBASE_TYPE xCRWokenByPost = pdFALSE;\r
+\r
+ while( UART_TX_REG_EMPTY() )\r
+ {\r
+ // Are there any characters in the queue waiting to be sent?\r
+ // xCRWokenByPost will automatically be set to pdTRUE if a co-routine\r
+ // is woken by the post - ensuring that only a single co-routine is\r
+ // woken no matter how many times we go around this loop.\r
+ if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )\r
+ {\r
+ SEND_CHARACTER( cCharToTx );\r
+ }\r
+ }\r
+ }</pre>\r
+ * \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR\r
+ * \ingroup Tasks\r
+ */\r
+#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )\r
+\r
+/*\r
+ * This function is intended for internal use by the co-routine macros only.\r
+ * The macro nature of the co-routine implementation requires that the\r
+ * prototype appears here. The function should not be used by application\r
+ * writers.\r
+ *\r
+ * Removes the current co-routine from its ready list and places it in the\r
+ * appropriate delayed list.\r
+ */\r
+void vCoRoutineAddToDelayedList( portTickType xTicksToDelay, xList *pxEventList );\r
+\r
+/*\r
+ * This function is intended for internal use by the queue implementation only.\r
+ * The function should not be used by application writers.\r
+ *\r
+ * Removes the highest priority co-routine from the event list and places it in\r
+ * the pending ready list.\r
+ */\r
+signed portBASE_TYPE xCoRoutineRemoveFromEventList( const xList *pxEventList );\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+\r
+#endif /* CO_ROUTINE_H */\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+/*\r
+ * This is the list implementation used by the scheduler. While it is tailored\r
+ * heavily for the schedulers needs, it is also available for use by\r
+ * application code.\r
+ *\r
+ * xLists can only store pointers to xListItems. Each xListItem contains a\r
+ * numeric value (xItemValue). Most of the time the lists are sorted in\r
+ * descending item value order.\r
+ *\r
+ * Lists are created already containing one list item. The value of this\r
+ * item is the maximum possible that can be stored, it is therefore always at\r
+ * the end of the list and acts as a marker. The list member pxHead always\r
+ * points to this marker - even though it is at the tail of the list. This\r
+ * is because the tail contains a wrap back pointer to the true head of\r
+ * the list.\r
+ *\r
+ * In addition to it's value, each list item contains a pointer to the next\r
+ * item in the list (pxNext), a pointer to the list it is in (pxContainer)\r
+ * and a pointer to back to the object that contains it. These later two\r
+ * pointers are included for efficiency of list manipulation. There is\r
+ * effectively a two way link between the object containing the list item and\r
+ * the list item itself.\r
+ *\r
+ *\r
+ * \page ListIntroduction List Implementation\r
+ * \ingroup FreeRTOSIntro\r
+ */\r
+\r
+\r
+#ifndef LIST_H\r
+#define LIST_H\r
+\r
+#ifdef __cplusplus\r
+extern "C" {\r
+#endif\r
+/*\r
+ * Definition of the only type of object that a list can contain.\r
+ */\r
+struct xLIST_ITEM\r
+{\r
+ portTickType xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */\r
+ volatile struct xLIST_ITEM * pxNext; /*< Pointer to the next xListItem in the list. */\r
+ volatile struct xLIST_ITEM * pxPrevious;/*< Pointer to the previous xListItem in the list. */\r
+ void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */\r
+ void * pvContainer; /*< Pointer to the list in which this list item is placed (if any). */\r
+};\r
+typedef struct xLIST_ITEM xListItem; /* For some reason lint wants this as two separate definitions. */\r
+\r
+struct xMINI_LIST_ITEM\r
+{\r
+ portTickType xItemValue;\r
+ volatile struct xLIST_ITEM *pxNext;\r
+ volatile struct xLIST_ITEM *pxPrevious;\r
+};\r
+typedef struct xMINI_LIST_ITEM xMiniListItem;\r
+\r
+/*\r
+ * Definition of the type of queue used by the scheduler.\r
+ */\r
+typedef struct xLIST\r
+{\r
+ volatile unsigned portBASE_TYPE uxNumberOfItems;\r
+ volatile xListItem * pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to pvListGetOwnerOfNextEntry (). */\r
+ volatile xMiniListItem xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */\r
+} xList;\r
+\r
+/*\r
+ * Access macro to set the owner of a list item. The owner of a list item\r
+ * is the object (usually a TCB) that contains the list item.\r
+ *\r
+ * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER\r
+ * \ingroup LinkedList\r
+ */\r
+#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( pxListItem )->pvOwner = ( void * ) ( pxOwner )\r
+\r
+/*\r
+ * Access macro to get the owner of a list item. The owner of a list item\r
+ * is the object (usually a TCB) that contains the list item.\r
+ *\r
+ * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER\r
+ * \ingroup LinkedList\r
+ */\r
+#define listGET_LIST_ITEM_OWNER( pxListItem ) ( pxListItem )->pvOwner\r
+\r
+/*\r
+ * Access macro to set the value of the list item. In most cases the value is\r
+ * used to sort the list in descending order.\r
+ *\r
+ * \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE\r
+ * \ingroup LinkedList\r
+ */\r
+#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( pxListItem )->xItemValue = ( xValue )\r
+\r
+/*\r
+ * Access macro to retrieve the value of the list item. The value can\r
+ * represent anything - for example a the priority of a task, or the time at\r
+ * which a task should be unblocked.\r
+ *\r
+ * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE\r
+ * \ingroup LinkedList\r
+ */\r
+#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )\r
+\r
+/*\r
+ * Access macro the retrieve the value of the list item at the head of a given\r
+ * list.\r
+ *\r
+ * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE\r
+ * \ingroup LinkedList\r
+ */\r
+#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( (&( ( pxList )->xListEnd ))->pxNext->xItemValue )\r
+\r
+/*\r
+ * Access macro to determine if a list contains any items. The macro will\r
+ * only have the value true if the list is empty.\r
+ *\r
+ * \page listLIST_IS_EMPTY listLIST_IS_EMPTY\r
+ * \ingroup LinkedList\r
+ */\r
+#define listLIST_IS_EMPTY( pxList ) ( ( pxList )->uxNumberOfItems == ( unsigned portBASE_TYPE ) 0 )\r
+\r
+/*\r
+ * Access macro to return the number of items in the list.\r
+ */\r
+#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )\r
+\r
+/*\r
+ * Access function to obtain the owner of the next entry in a list.\r
+ *\r
+ * The list member pxIndex is used to walk through a list. Calling\r
+ * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list\r
+ * and returns that entries pxOwner parameter. Using multiple calls to this\r
+ * function it is therefore possible to move through every item contained in\r
+ * a list.\r
+ *\r
+ * The pxOwner parameter of a list item is a pointer to the object that owns\r
+ * the list item. In the scheduler this is normally a task control block.\r
+ * The pxOwner parameter effectively creates a two way link between the list\r
+ * item and its owner.\r
+ *\r
+ * @param pxList The list from which the next item owner is to be returned.\r
+ *\r
+ * \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY\r
+ * \ingroup LinkedList\r
+ */\r
+#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \\r
+{ \\r
+xList * const pxConstList = ( pxList ); \\r
+ /* Increment the index to the next item and return the item, ensuring */ \\r
+ /* we don't return the marker used at the end of the list. */ \\r
+ ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \\r
+ if( ( pxConstList )->pxIndex == ( xListItem * ) &( ( pxConstList )->xListEnd ) ) \\r
+ { \\r
+ ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \\r
+ } \\r
+ ( pxTCB ) = ( pxConstList )->pxIndex->pvOwner; \\r
+}\r
+\r
+\r
+/*\r
+ * Access function to obtain the owner of the first entry in a list. Lists\r
+ * are normally sorted in ascending item value order.\r
+ *\r
+ * This function returns the pxOwner member of the first item in the list.\r
+ * The pxOwner parameter of a list item is a pointer to the object that owns\r
+ * the list item. In the scheduler this is normally a task control block.\r
+ * The pxOwner parameter effectively creates a two way link between the list\r
+ * item and its owner.\r
+ *\r
+ * @param pxList The list from which the owner of the head item is to be\r
+ * returned.\r
+ *\r
+ * \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY\r
+ * \ingroup LinkedList\r
+ */\r
+#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( (&( ( pxList )->xListEnd ))->pxNext->pvOwner )\r
+\r
+/*\r
+ * Check to see if a list item is within a list. The list item maintains a\r
+ * "container" pointer that points to the list it is in. All this macro does\r
+ * is check to see if the container and the list match.\r
+ *\r
+ * @param pxList The list we want to know if the list item is within.\r
+ * @param pxListItem The list item we want to know if is in the list.\r
+ * @return pdTRUE is the list item is in the list, otherwise pdFALSE.\r
+ * pointer against\r
+ */\r
+#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( pxListItem )->pvContainer == ( void * ) ( pxList ) )\r
+\r
+/*\r
+ * This provides a crude means of knowing if a list has been initialised, as\r
+ * pxList->xListEnd.xItemValue is set to portMAX_DELAY by the vListInitialise()\r
+ * function.\r
+ */\r
+#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY )\r
+\r
+/*\r
+ * Must be called before a list is used! This initialises all the members\r
+ * of the list structure and inserts the xListEnd item into the list as a\r
+ * marker to the back of the list.\r
+ *\r
+ * @param pxList Pointer to the list being initialised.\r
+ *\r
+ * \page vListInitialise vListInitialise\r
+ * \ingroup LinkedList\r
+ */\r
+void vListInitialise( xList *pxList );\r
+\r
+/*\r
+ * Must be called before a list item is used. This sets the list container to\r
+ * null so the item does not think that it is already contained in a list.\r
+ *\r
+ * @param pxItem Pointer to the list item being initialised.\r
+ *\r
+ * \page vListInitialiseItem vListInitialiseItem\r
+ * \ingroup LinkedList\r
+ */\r
+void vListInitialiseItem( xListItem *pxItem );\r
+\r
+/*\r
+ * Insert a list item into a list. The item will be inserted into the list in\r
+ * a position determined by its item value (descending item value order).\r
+ *\r
+ * @param pxList The list into which the item is to be inserted.\r
+ *\r
+ * @param pxNewListItem The item to that is to be placed in the list.\r
+ *\r
+ * \page vListInsert vListInsert\r
+ * \ingroup LinkedList\r
+ */\r
+void vListInsert( xList *pxList, xListItem *pxNewListItem );\r
+\r
+/*\r
+ * Insert a list item into a list. The item will be inserted in a position\r
+ * such that it will be the last item within the list returned by multiple\r
+ * calls to listGET_OWNER_OF_NEXT_ENTRY.\r
+ *\r
+ * The list member pvIndex is used to walk through a list. Calling\r
+ * listGET_OWNER_OF_NEXT_ENTRY increments pvIndex to the next item in the list.\r
+ * Placing an item in a list using vListInsertEnd effectively places the item\r
+ * in the list position pointed to by pvIndex. This means that every other\r
+ * item within the list will be returned by listGET_OWNER_OF_NEXT_ENTRY before\r
+ * the pvIndex parameter again points to the item being inserted.\r
+ *\r
+ * @param pxList The list into which the item is to be inserted.\r
+ *\r
+ * @param pxNewListItem The list item to be inserted into the list.\r
+ *\r
+ * \page vListInsertEnd vListInsertEnd\r
+ * \ingroup LinkedList\r
+ */\r
+void vListInsertEnd( xList *pxList, xListItem *pxNewListItem );\r
+\r
+/*\r
+ * Remove an item from a list. The list item has a pointer to the list that\r
+ * it is in, so only the list item need be passed into the function.\r
+ *\r
+ * @param vListRemove The item to be removed. The item will remove itself from\r
+ * the list pointed to by it's pxContainer parameter.\r
+ *\r
+ * \page vListRemove vListRemove\r
+ * \ingroup LinkedList\r
+ */\r
+void vListRemove( xListItem *pxItemToRemove );\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+\r
+#endif\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+#ifndef MPU_WRAPPERS_H\r
+#define MPU_WRAPPERS_H\r
+\r
+/* This file redefines API functions to be called through a wrapper macro, but\r
+only for ports that are using the MPU. */\r
+#ifdef portUSING_MPU_WRAPPERS\r
+\r
+ /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE will be defined when this file is\r
+ included from queue.c or task.c to prevent it from having an effect within\r
+ those files. */\r
+ #ifndef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+ #define xTaskGenericCreate MPU_xTaskGenericCreate\r
+ #define vTaskAllocateMPURegions MPU_vTaskAllocateMPURegions\r
+ #define vTaskDelete MPU_vTaskDelete\r
+ #define vTaskDelayUntil MPU_vTaskDelayUntil\r
+ #define vTaskDelay MPU_vTaskDelay\r
+ #define uxTaskPriorityGet MPU_uxTaskPriorityGet\r
+ #define vTaskPrioritySet MPU_vTaskPrioritySet\r
+ #define vTaskSuspend MPU_vTaskSuspend\r
+ #define xTaskIsTaskSuspended MPU_xTaskIsTaskSuspended\r
+ #define vTaskResume MPU_vTaskResume\r
+ #define vTaskSuspendAll MPU_vTaskSuspendAll\r
+ #define xTaskResumeAll MPU_xTaskResumeAll\r
+ #define xTaskGetTickCount MPU_xTaskGetTickCount\r
+ #define uxTaskGetNumberOfTasks MPU_uxTaskGetNumberOfTasks\r
+ #define vTaskList MPU_vTaskList\r
+ #define vTaskGetRunTimeStats MPU_vTaskGetRunTimeStats\r
+ #define vTaskStartTrace MPU_vTaskStartTrace\r
+ #define ulTaskEndTrace MPU_ulTaskEndTrace\r
+ #define vTaskSetApplicationTaskTag MPU_vTaskSetApplicationTaskTag\r
+ #define xTaskGetApplicationTaskTag MPU_xTaskGetApplicationTaskTag\r
+ #define xTaskCallApplicationTaskHook MPU_xTaskCallApplicationTaskHook\r
+ #define uxTaskGetStackHighWaterMark MPU_uxTaskGetStackHighWaterMark\r
+ #define xTaskGetCurrentTaskHandle MPU_xTaskGetCurrentTaskHandle\r
+ #define xTaskGetSchedulerState MPU_xTaskGetSchedulerState\r
+\r
+ #define xQueueGenericCreate MPU_xQueueGenericCreate\r
+ #define xQueueCreateMutex MPU_xQueueCreateMutex\r
+ #define xQueueGiveMutexRecursive MPU_xQueueGiveMutexRecursive\r
+ #define xQueueTakeMutexRecursive MPU_xQueueTakeMutexRecursive\r
+ #define xQueueCreateCountingSemaphore MPU_xQueueCreateCountingSemaphore\r
+ #define xQueueGenericSend MPU_xQueueGenericSend\r
+ #define xQueueAltGenericSend MPU_xQueueAltGenericSend\r
+ #define xQueueAltGenericReceive MPU_xQueueAltGenericReceive\r
+ #define xQueueGenericReceive MPU_xQueueGenericReceive\r
+ #define uxQueueMessagesWaiting MPU_uxQueueMessagesWaiting\r
+ #define vQueueDelete MPU_vQueueDelete\r
+\r
+ #define pvPortMalloc MPU_pvPortMalloc\r
+ #define vPortFree MPU_vPortFree\r
+ #define xPortGetFreeHeapSize MPU_xPortGetFreeHeapSize\r
+ #define vPortInitialiseBlocks MPU_vPortInitialiseBlocks\r
+\r
+ #if configQUEUE_REGISTRY_SIZE > 0\r
+ #define vQueueAddToRegistry MPU_vQueueAddToRegistry\r
+ #define vQueueUnregisterQueue MPU_vQueueUnregisterQueue\r
+ #endif\r
+\r
+ /* Remove the privileged function macro. */\r
+ #define PRIVILEGED_FUNCTION\r
+\r
+ #else /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */\r
+\r
+ /* Ensure API functions go in the privileged execution section. */\r
+ #define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions")))\r
+ #define PRIVILEGED_DATA __attribute__((section("privileged_data")))\r
+ //#define PRIVILEGED_DATA\r
+\r
+ #endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */\r
+\r
+#else /* portUSING_MPU_WRAPPERS */\r
+\r
+ #define PRIVILEGED_FUNCTION\r
+ #define PRIVILEGED_DATA\r
+ #define portUSING_MPU_WRAPPERS 0\r
+\r
+#endif /* portUSING_MPU_WRAPPERS */\r
+\r
+\r
+#endif /* MPU_WRAPPERS_H */\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+/*-----------------------------------------------------------\r
+ * Portable layer API. Each function must be defined for each port.\r
+ *----------------------------------------------------------*/\r
+\r
+#ifndef PORTABLE_H\r
+#define PORTABLE_H\r
+\r
+/* Include the macro file relevant to the port being used. */\r
+\r
+#ifdef OPEN_WATCOM_INDUSTRIAL_PC_PORT\r
+ #include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h"\r
+ typedef void ( __interrupt __far *pxISR )();\r
+#endif\r
+\r
+#ifdef OPEN_WATCOM_FLASH_LITE_186_PORT\r
+ #include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h"\r
+ typedef void ( __interrupt __far *pxISR )();\r
+#endif\r
+\r
+#ifdef GCC_MEGA_AVR\r
+ #include "../portable/GCC/ATMega323/portmacro.h"\r
+#endif\r
+\r
+#ifdef IAR_MEGA_AVR\r
+ #include "../portable/IAR/ATMega323/portmacro.h"\r
+#endif\r
+\r
+#ifdef MPLAB_PIC24_PORT\r
+ #include "..\..\Source\portable\MPLAB\PIC24_dsPIC\portmacro.h"\r
+#endif\r
+\r
+#ifdef MPLAB_DSPIC_PORT\r
+ #include "..\..\Source\portable\MPLAB\PIC24_dsPIC\portmacro.h"\r
+#endif\r
+\r
+#ifdef MPLAB_PIC18F_PORT\r
+ #include "..\..\Source\portable\MPLAB\PIC18F\portmacro.h"\r
+#endif\r
+\r
+#ifdef MPLAB_PIC32MX_PORT\r
+ #include "..\..\Source\portable\MPLAB\PIC32MX\portmacro.h"\r
+#endif\r
+\r
+#ifdef _FEDPICC\r
+ #include "libFreeRTOS/Include/portmacro.h"\r
+#endif\r
+\r
+#ifdef SDCC_CYGNAL\r
+ #include "../../Source/portable/SDCC/Cygnal/portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_ARM7\r
+ #include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_ARM7_ECLIPSE\r
+ #include "portmacro.h"\r
+#endif\r
+\r
+#ifdef ROWLEY_LPC23xx\r
+ #include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h"\r
+#endif\r
+\r
+#ifdef IAR_MSP430\r
+ #include "..\..\Source\portable\IAR\MSP430\portmacro.h" \r
+#endif\r
+ \r
+#ifdef GCC_MSP430\r
+ #include "../../Source/portable/GCC/MSP430F449/portmacro.h"\r
+#endif\r
+\r
+#ifdef ROWLEY_MSP430\r
+ #include "../../Source/portable/Rowley/MSP430F449/portmacro.h"\r
+#endif\r
+\r
+#ifdef ARM7_LPC21xx_KEIL_RVDS\r
+ #include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h"\r
+#endif\r
+\r
+#ifdef SAM7_GCC\r
+ #include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h"\r
+#endif\r
+\r
+#ifdef SAM7_IAR\r
+ #include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h"\r
+#endif\r
+\r
+#ifdef SAM9XE_IAR\r
+ #include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h"\r
+#endif\r
+\r
+#ifdef LPC2000_IAR\r
+ #include "..\..\Source\portable\IAR\LPC2000\portmacro.h"\r
+#endif\r
+\r
+#ifdef STR71X_IAR\r
+ #include "..\..\Source\portable\IAR\STR71x\portmacro.h"\r
+#endif\r
+\r
+#ifdef STR75X_IAR\r
+ #include "..\..\Source\portable\IAR\STR75x\portmacro.h"\r
+#endif\r
+ \r
+#ifdef STR75X_GCC\r
+ #include "..\..\Source\portable\GCC\STR75x\portmacro.h"\r
+#endif\r
+\r
+#ifdef STR91X_IAR\r
+ #include "..\..\Source\portable\IAR\STR91x\portmacro.h"\r
+#endif\r
+ \r
+#ifdef GCC_H8S\r
+ #include "../../Source/portable/GCC/H8S2329/portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_AT91FR40008\r
+ #include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h"\r
+#endif\r
+\r
+#ifdef RVDS_ARMCM3_LM3S102\r
+ #include "../../Source/portable/RVDS/ARM_CM3/portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_ARMCM3_LM3S102\r
+ #include "../../Source/portable/GCC/ARM_CM3/portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_ARMCM3\r
+ #include "../../Source/portable/GCC/ARM_CM3/portmacro.h"\r
+#endif\r
+\r
+#ifdef IAR_ARM_CM3\r
+ #include "../../Source/portable/IAR/ARM_CM3/portmacro.h"\r
+#endif\r
+\r
+#ifdef IAR_ARMCM3_LM\r
+ #include "../../Source/portable/IAR/ARM_CM3/portmacro.h"\r
+#endif\r
+ \r
+#ifdef HCS12_CODE_WARRIOR\r
+ #include "../../Source/portable/CodeWarrior/HCS12/portmacro.h"\r
+#endif \r
+\r
+#ifdef MICROBLAZE_GCC\r
+ #include "../../Source/portable/GCC/MicroBlaze/portmacro.h"\r
+#endif\r
+\r
+#ifdef TERN_EE\r
+ #include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_HCS12\r
+ #include "../../Source/portable/GCC/HCS12/portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_MCF5235\r
+ #include "../../Source/portable/GCC/MCF5235/portmacro.h"\r
+#endif\r
+\r
+#ifdef COLDFIRE_V2_GCC\r
+ #include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h"\r
+#endif\r
+\r
+#ifdef COLDFIRE_V2_CODEWARRIOR\r
+ #include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_PPC405\r
+ #include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h"\r
+#endif\r
+\r
+#ifdef GCC_PPC440\r
+ #include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h"\r
+#endif\r
+\r
+#ifdef _16FX_SOFTUNE\r
+ #include "..\..\Source\portable\Softune\MB96340\portmacro.h"\r
+#endif\r
+\r
+#ifdef BCC_INDUSTRIAL_PC_PORT\r
+ /* A short file name has to be used in place of the normal\r
+ FreeRTOSConfig.h when using the Borland compiler. */\r
+ #include "frconfig.h"\r
+ #include "..\portable\BCC\16BitDOS\PC\prtmacro.h"\r
+ typedef void ( __interrupt __far *pxISR )();\r
+#endif\r
+\r
+#ifdef BCC_FLASH_LITE_186_PORT\r
+ /* A short file name has to be used in place of the normal\r
+ FreeRTOSConfig.h when using the Borland compiler. */\r
+ #include "frconfig.h"\r
+ #include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h"\r
+ typedef void ( __interrupt __far *pxISR )();\r
+#endif\r
+\r
+#ifdef __GNUC__\r
+ #ifdef __AVR32_AVR32A__\r
+ #include "portmacro.h"\r
+ #endif\r
+#endif\r
+\r
+#ifdef __ICCAVR32__\r
+ #ifdef __CORE__\r
+ #if __CORE__ == __AVR32A__\r
+ #include "portmacro.h"\r
+ #endif\r
+ #endif\r
+#endif\r
+\r
+#ifdef __91467D\r
+ #include "portmacro.h"\r
+#endif\r
+\r
+#ifdef __96340\r
+ #include "portmacro.h"\r
+#endif\r
+\r
+\r
+#ifdef __IAR_V850ES_Fx3__\r
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
+#endif\r
+\r
+#ifdef __IAR_V850ES_Jx3__\r
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
+#endif\r
+\r
+#ifdef __IAR_V850ES_Jx3_L__\r
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
+#endif\r
+\r
+#ifdef __IAR_V850ES_Jx2__\r
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
+#endif\r
+\r
+#ifdef __IAR_V850ES_Hx2__\r
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"\r
+#endif\r
+\r
+#ifdef __IAR_78K0R_Kx3__\r
+ #include "../../Source/portable/IAR/78K0R/portmacro.h"\r
+#endif\r
+ \r
+#ifdef __IAR_78K0R_Kx3L__\r
+ #include "../../Source/portable/IAR/78K0R/portmacro.h"\r
+#endif\r
+ \r
+/* Catch all to ensure portmacro.h is included in the build. Newer demos\r
+have the path as part of the project options, rather than as relative from\r
+the project location. If portENTER_CRITICAL() has not been defined then\r
+portmacro.h has not yet been included - as every portmacro.h provides a\r
+portENTER_CRITICAL() definition. Check the demo application for your demo\r
+to find the path to the correct portmacro.h file. */\r
+#ifndef portENTER_CRITICAL\r
+ #include "portmacro.h" \r
+#endif\r
+ \r
+#if portBYTE_ALIGNMENT == 8\r
+ #define portBYTE_ALIGNMENT_MASK ( 0x0007 )\r
+#endif\r
+\r
+#if portBYTE_ALIGNMENT == 4\r
+ #define portBYTE_ALIGNMENT_MASK ( 0x0003 )\r
+#endif\r
+\r
+#if portBYTE_ALIGNMENT == 2\r
+ #define portBYTE_ALIGNMENT_MASK ( 0x0001 )\r
+#endif\r
+\r
+#if portBYTE_ALIGNMENT == 1\r
+ #define portBYTE_ALIGNMENT_MASK ( 0x0000 )\r
+#endif\r
+\r
+#ifndef portBYTE_ALIGNMENT_MASK\r
+ #error "Invalid portBYTE_ALIGNMENT definition"\r
+#endif\r
+\r
+#ifndef portNUM_CONFIGURABLE_REGIONS\r
+ #define portNUM_CONFIGURABLE_REGIONS 1\r
+#endif\r
+\r
+#ifdef __cplusplus\r
+extern "C" {\r
+#endif\r
+\r
+#include "mpu_wrappers.h"\r
+\r
+/*\r
+ * Setup the stack of a new task so it is ready to be placed under the\r
+ * scheduler control. The registers have to be placed on the stack in\r
+ * the order that the port expects to find them.\r
+ *\r
+ */\r
+#if( portUSING_MPU_WRAPPERS == 1 )\r
+ portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters, portBASE_TYPE xRunPrivileged ) PRIVILEGED_FUNCTION;\r
+#else\r
+ portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters );\r
+#endif\r
+\r
+/*\r
+ * Map to the memory management routines required for the port.\r
+ */\r
+void *pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;\r
+void vPortFree( void *pv ) PRIVILEGED_FUNCTION;\r
+void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;\r
+size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Setup the hardware ready for the scheduler to take control. This generally\r
+ * sets up a tick interrupt and sets timers for the correct tick frequency.\r
+ */\r
+portBASE_TYPE xPortStartScheduler( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Undo any hardware/ISR setup that was performed by xPortStartScheduler() so\r
+ * the hardware is left in its original condition after the scheduler stops\r
+ * executing.\r
+ */\r
+void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * The structures and methods of manipulating the MPU are contained within the\r
+ * port layer.\r
+ *\r
+ * Fills the xMPUSettings structure with the memory region information\r
+ * contained in xRegions.\r
+ */\r
+#if( portUSING_MPU_WRAPPERS == 1 ) \r
+ struct xMEMORY_REGION;\r
+ void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, portSTACK_TYPE *pxBottomOfStack, unsigned short usStackDepth ) PRIVILEGED_FUNCTION;\r
+#endif\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+\r
+#endif /* PORTABLE_H */\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+#ifndef PROJDEFS_H\r
+#define PROJDEFS_H\r
+\r
+/* Defines the prototype to which task functions must conform. */\r
+typedef void (*pdTASK_CODE)( void * );\r
+\r
+#define pdTRUE ( 1 )\r
+#define pdFALSE ( 0 )\r
+\r
+#define pdPASS ( 1 )\r
+#define pdFAIL ( 0 )\r
+#define errQUEUE_EMPTY ( 0 )\r
+#define errQUEUE_FULL ( 0 )\r
+\r
+/* Error definitions. */\r
+#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY ( -1 )\r
+#define errNO_TASK_TO_RUN ( -2 )\r
+#define errQUEUE_BLOCKED ( -4 )\r
+#define errQUEUE_YIELD ( -5 )\r
+\r
+#endif /* PROJDEFS_H */\r
+\r
+\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+\r
+#ifndef QUEUE_H\r
+#define QUEUE_H\r
+\r
+#ifndef INC_FREERTOS_H\r
+ #error "include FreeRTOS.h" must appear in source files before "include queue.h"\r
+#endif\r
+\r
+#ifdef __cplusplus\r
+extern "C" {\r
+#endif\r
+\r
+\r
+#include "mpu_wrappers.h"\r
+\r
+/**\r
+ * Type by which queues are referenced. For example, a call to xQueueCreate\r
+ * returns (via a pointer parameter) an xQueueHandle variable that can then\r
+ * be used as a parameter to xQueueSend(), xQueueReceive(), etc.\r
+ */\r
+typedef void * xQueueHandle;\r
+\r
+\r
+/* For internal use only. */\r
+#define queueSEND_TO_BACK ( 0 )\r
+#define queueSEND_TO_FRONT ( 1 )\r
+\r
+/* For internal use only. These definitions *must* match those in queue.c. */\r
+#define queueQUEUE_TYPE_BASE ( 0U )\r
+#define queueQUEUE_TYPE_MUTEX ( 1U )\r
+#define queueQUEUE_TYPE_COUNTING_SEMAPHORE ( 2U )\r
+#define queueQUEUE_TYPE_BINARY_SEMAPHORE ( 3U )\r
+#define queueQUEUE_TYPE_RECURSIVE_MUTEX ( 4U )\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ xQueueHandle xQueueCreate(\r
+ unsigned portBASE_TYPE uxQueueLength,\r
+ unsigned portBASE_TYPE uxItemSize\r
+ );\r
+ * </pre>\r
+ *\r
+ * Creates a new queue instance. This allocates the storage required by the\r
+ * new queue and returns a handle for the queue.\r
+ *\r
+ * @param uxQueueLength The maximum number of items that the queue can contain.\r
+ *\r
+ * @param uxItemSize The number of bytes each item in the queue will require.\r
+ * Items are queued by copy, not by reference, so this is the number of bytes\r
+ * that will be copied for each posted item. Each item on the queue must be\r
+ * the same size.\r
+ *\r
+ * @return If the queue is successfully create then a handle to the newly\r
+ * created queue is returned. If the queue cannot be created then 0 is\r
+ * returned.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ struct AMessage\r
+ {\r
+ char ucMessageID;\r
+ char ucData[ 20 ];\r
+ };\r
+\r
+ void vATask( void *pvParameters )\r
+ {\r
+ xQueueHandle xQueue1, xQueue2;\r
+\r
+ // Create a queue capable of containing 10 unsigned long values.\r
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
+ if( xQueue1 == 0 )\r
+ {\r
+ // Queue was not created and must not be used.\r
+ }\r
+\r
+ // Create a queue capable of containing 10 pointers to AMessage structures.\r
+ // These should be passed by pointer as they contain a lot of data.\r
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
+ if( xQueue2 == 0 )\r
+ {\r
+ // Queue was not created and must not be used.\r
+ }\r
+\r
+ // ... Rest of task code.\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueCreate xQueueCreate\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueueCreate( uxQueueLength, uxItemSize ) xQueueGenericCreate( uxQueueLength, uxItemSize, queueQUEUE_TYPE_BASE )\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueSendToToFront(\r
+ xQueueHandle xQueue,\r
+ const void * pvItemToQueue,\r
+ portTickType xTicksToWait\r
+ );\r
+ * </pre>\r
+ *\r
+ * This is a macro that calls xQueueGenericSend().\r
+ *\r
+ * Post an item to the front of a queue. The item is queued by copy, not by\r
+ * reference. This function must not be called from an interrupt service\r
+ * routine. See xQueueSendFromISR () for an alternative which may be used\r
+ * in an ISR.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param xTicksToWait The maximum amount of time the task should block\r
+ * waiting for space to become available on the queue, should it already\r
+ * be full. The call will return immediately if this is set to 0 and the\r
+ * queue is full. The time is defined in tick periods so the constant\r
+ * portTICK_RATE_MS should be used to convert to real time if this is required.\r
+ *\r
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ struct AMessage\r
+ {\r
+ char ucMessageID;\r
+ char ucData[ 20 ];\r
+ } xMessage;\r
+\r
+ unsigned long ulVar = 10UL;\r
+\r
+ void vATask( void *pvParameters )\r
+ {\r
+ xQueueHandle xQueue1, xQueue2;\r
+ struct AMessage *pxMessage;\r
+\r
+ // Create a queue capable of containing 10 unsigned long values.\r
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
+\r
+ // Create a queue capable of containing 10 pointers to AMessage structures.\r
+ // These should be passed by pointer as they contain a lot of data.\r
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
+\r
+ // ...\r
+\r
+ if( xQueue1 != 0 )\r
+ {\r
+ // Send an unsigned long. Wait for 10 ticks for space to become\r
+ // available if necessary.\r
+ if( xQueueSendToFront( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )\r
+ {\r
+ // Failed to post the message, even after 10 ticks.\r
+ }\r
+ }\r
+\r
+ if( xQueue2 != 0 )\r
+ {\r
+ // Send a pointer to a struct AMessage object. Don't block if the\r
+ // queue is already full.\r
+ pxMessage = & xMessage;\r
+ xQueueSendToFront( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );\r
+ }\r
+\r
+ // ... Rest of task code.\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueSend xQueueSend\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueueSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_FRONT )\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueSendToBack(\r
+ xQueueHandle xQueue,\r
+ const void * pvItemToQueue,\r
+ portTickType xTicksToWait\r
+ );\r
+ * </pre>\r
+ *\r
+ * This is a macro that calls xQueueGenericSend().\r
+ *\r
+ * Post an item to the back of a queue. The item is queued by copy, not by\r
+ * reference. This function must not be called from an interrupt service\r
+ * routine. See xQueueSendFromISR () for an alternative which may be used\r
+ * in an ISR.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param xTicksToWait The maximum amount of time the task should block\r
+ * waiting for space to become available on the queue, should it already\r
+ * be full. The call will return immediately if this is set to 0 and the queue\r
+ * is full. The time is defined in tick periods so the constant\r
+ * portTICK_RATE_MS should be used to convert to real time if this is required.\r
+ *\r
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ struct AMessage\r
+ {\r
+ char ucMessageID;\r
+ char ucData[ 20 ];\r
+ } xMessage;\r
+\r
+ unsigned long ulVar = 10UL;\r
+\r
+ void vATask( void *pvParameters )\r
+ {\r
+ xQueueHandle xQueue1, xQueue2;\r
+ struct AMessage *pxMessage;\r
+\r
+ // Create a queue capable of containing 10 unsigned long values.\r
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
+\r
+ // Create a queue capable of containing 10 pointers to AMessage structures.\r
+ // These should be passed by pointer as they contain a lot of data.\r
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
+\r
+ // ...\r
+\r
+ if( xQueue1 != 0 )\r
+ {\r
+ // Send an unsigned long. Wait for 10 ticks for space to become\r
+ // available if necessary.\r
+ if( xQueueSendToBack( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )\r
+ {\r
+ // Failed to post the message, even after 10 ticks.\r
+ }\r
+ }\r
+\r
+ if( xQueue2 != 0 )\r
+ {\r
+ // Send a pointer to a struct AMessage object. Don't block if the\r
+ // queue is already full.\r
+ pxMessage = & xMessage;\r
+ xQueueSendToBack( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );\r
+ }\r
+\r
+ // ... Rest of task code.\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueSend xQueueSend\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueueSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueSend(\r
+ xQueueHandle xQueue,\r
+ const void * pvItemToQueue,\r
+ portTickType xTicksToWait\r
+ );\r
+ * </pre>\r
+ *\r
+ * This is a macro that calls xQueueGenericSend(). It is included for\r
+ * backward compatibility with versions of FreeRTOS.org that did not\r
+ * include the xQueueSendToFront() and xQueueSendToBack() macros. It is\r
+ * equivalent to xQueueSendToBack().\r
+ *\r
+ * Post an item on a queue. The item is queued by copy, not by reference.\r
+ * This function must not be called from an interrupt service routine.\r
+ * See xQueueSendFromISR () for an alternative which may be used in an ISR.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param xTicksToWait The maximum amount of time the task should block\r
+ * waiting for space to become available on the queue, should it already\r
+ * be full. The call will return immediately if this is set to 0 and the\r
+ * queue is full. The time is defined in tick periods so the constant\r
+ * portTICK_RATE_MS should be used to convert to real time if this is required.\r
+ *\r
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ struct AMessage\r
+ {\r
+ char ucMessageID;\r
+ char ucData[ 20 ];\r
+ } xMessage;\r
+\r
+ unsigned long ulVar = 10UL;\r
+\r
+ void vATask( void *pvParameters )\r
+ {\r
+ xQueueHandle xQueue1, xQueue2;\r
+ struct AMessage *pxMessage;\r
+\r
+ // Create a queue capable of containing 10 unsigned long values.\r
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
+\r
+ // Create a queue capable of containing 10 pointers to AMessage structures.\r
+ // These should be passed by pointer as they contain a lot of data.\r
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
+\r
+ // ...\r
+\r
+ if( xQueue1 != 0 )\r
+ {\r
+ // Send an unsigned long. Wait for 10 ticks for space to become\r
+ // available if necessary.\r
+ if( xQueueSend( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )\r
+ {\r
+ // Failed to post the message, even after 10 ticks.\r
+ }\r
+ }\r
+\r
+ if( xQueue2 != 0 )\r
+ {\r
+ // Send a pointer to a struct AMessage object. Don't block if the\r
+ // queue is already full.\r
+ pxMessage = & xMessage;\r
+ xQueueSend( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );\r
+ }\r
+\r
+ // ... Rest of task code.\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueSend xQueueSend\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )\r
+\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueGenericSend(\r
+ xQueueHandle xQueue,\r
+ const void * pvItemToQueue,\r
+ portTickType xTicksToWait\r
+ portBASE_TYPE xCopyPosition\r
+ );\r
+ * </pre>\r
+ *\r
+ * It is preferred that the macros xQueueSend(), xQueueSendToFront() and\r
+ * xQueueSendToBack() are used in place of calling this function directly.\r
+ *\r
+ * Post an item on a queue. The item is queued by copy, not by reference.\r
+ * This function must not be called from an interrupt service routine.\r
+ * See xQueueSendFromISR () for an alternative which may be used in an ISR.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param xTicksToWait The maximum amount of time the task should block\r
+ * waiting for space to become available on the queue, should it already\r
+ * be full. The call will return immediately if this is set to 0 and the\r
+ * queue is full. The time is defined in tick periods so the constant\r
+ * portTICK_RATE_MS should be used to convert to real time if this is required.\r
+ *\r
+ * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the\r
+ * item at the back of the queue, or queueSEND_TO_FRONT to place the item\r
+ * at the front of the queue (for high priority messages).\r
+ *\r
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ struct AMessage\r
+ {\r
+ char ucMessageID;\r
+ char ucData[ 20 ];\r
+ } xMessage;\r
+\r
+ unsigned long ulVar = 10UL;\r
+\r
+ void vATask( void *pvParameters )\r
+ {\r
+ xQueueHandle xQueue1, xQueue2;\r
+ struct AMessage *pxMessage;\r
+\r
+ // Create a queue capable of containing 10 unsigned long values.\r
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );\r
+\r
+ // Create a queue capable of containing 10 pointers to AMessage structures.\r
+ // These should be passed by pointer as they contain a lot of data.\r
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
+\r
+ // ...\r
+\r
+ if( xQueue1 != 0 )\r
+ {\r
+ // Send an unsigned long. Wait for 10 ticks for space to become\r
+ // available if necessary.\r
+ if( xQueueGenericSend( xQueue1, ( void * ) &ulVar, ( portTickType ) 10, queueSEND_TO_BACK ) != pdPASS )\r
+ {\r
+ // Failed to post the message, even after 10 ticks.\r
+ }\r
+ }\r
+\r
+ if( xQueue2 != 0 )\r
+ {\r
+ // Send a pointer to a struct AMessage object. Don't block if the\r
+ // queue is already full.\r
+ pxMessage = & xMessage;\r
+ xQueueGenericSend( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0, queueSEND_TO_BACK );\r
+ }\r
+\r
+ // ... Rest of task code.\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueSend xQueueSend\r
+ * \ingroup QueueManagement\r
+ */\r
+signed portBASE_TYPE xQueueGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition );\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueuePeek(\r
+ xQueueHandle xQueue,\r
+ void *pvBuffer,\r
+ portTickType xTicksToWait\r
+ );</pre>\r
+ *\r
+ * This is a macro that calls the xQueueGenericReceive() function.\r
+ *\r
+ * Receive an item from a queue without removing the item from the queue.\r
+ * The item is received by copy so a buffer of adequate size must be\r
+ * provided. The number of bytes copied into the buffer was defined when\r
+ * the queue was created.\r
+ *\r
+ * Successfully received items remain on the queue so will be returned again\r
+ * by the next call, or a call to xQueueReceive().\r
+ *\r
+ * This macro must not be used in an interrupt service routine.\r
+ *\r
+ * @param pxQueue The handle to the queue from which the item is to be\r
+ * received.\r
+ *\r
+ * @param pvBuffer Pointer to the buffer into which the received item will\r
+ * be copied.\r
+ *\r
+ * @param xTicksToWait The maximum amount of time the task should block\r
+ * waiting for an item to receive should the queue be empty at the time\r
+ * of the call. The time is defined in tick periods so the constant\r
+ * portTICK_RATE_MS should be used to convert to real time if this is required.\r
+ * xQueuePeek() will return immediately if xTicksToWait is 0 and the queue\r
+ * is empty.\r
+ *\r
+ * @return pdTRUE if an item was successfully received from the queue,\r
+ * otherwise pdFALSE.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ struct AMessage\r
+ {\r
+ char ucMessageID;\r
+ char ucData[ 20 ];\r
+ } xMessage;\r
+\r
+ xQueueHandle xQueue;\r
+\r
+ // Task to create a queue and post a value.\r
+ void vATask( void *pvParameters )\r
+ {\r
+ struct AMessage *pxMessage;\r
+\r
+ // Create a queue capable of containing 10 pointers to AMessage structures.\r
+ // These should be passed by pointer as they contain a lot of data.\r
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
+ if( xQueue == 0 )\r
+ {\r
+ // Failed to create the queue.\r
+ }\r
+\r
+ // ...\r
+\r
+ // Send a pointer to a struct AMessage object. Don't block if the\r
+ // queue is already full.\r
+ pxMessage = & xMessage;\r
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );\r
+\r
+ // ... Rest of task code.\r
+ }\r
+\r
+ // Task to peek the data from the queue.\r
+ void vADifferentTask( void *pvParameters )\r
+ {\r
+ struct AMessage *pxRxedMessage;\r
+\r
+ if( xQueue != 0 )\r
+ {\r
+ // Peek a message on the created queue. Block for 10 ticks if a\r
+ // message is not immediately available.\r
+ if( xQueuePeek( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )\r
+ {\r
+ // pcRxedMessage now points to the struct AMessage variable posted\r
+ // by vATask, but the item still remains on the queue.\r
+ }\r
+ }\r
+\r
+ // ... Rest of task code.\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueReceive xQueueReceive\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueuePeek( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdTRUE )\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueReceive(\r
+ xQueueHandle xQueue,\r
+ void *pvBuffer,\r
+ portTickType xTicksToWait\r
+ );</pre>\r
+ *\r
+ * This is a macro that calls the xQueueGenericReceive() function.\r
+ *\r
+ * Receive an item from a queue. The item is received by copy so a buffer of\r
+ * adequate size must be provided. The number of bytes copied into the buffer\r
+ * was defined when the queue was created.\r
+ *\r
+ * Successfully received items are removed from the queue.\r
+ *\r
+ * This function must not be used in an interrupt service routine. See\r
+ * xQueueReceiveFromISR for an alternative that can.\r
+ *\r
+ * @param pxQueue The handle to the queue from which the item is to be\r
+ * received.\r
+ *\r
+ * @param pvBuffer Pointer to the buffer into which the received item will\r
+ * be copied.\r
+ *\r
+ * @param xTicksToWait The maximum amount of time the task should block\r
+ * waiting for an item to receive should the queue be empty at the time\r
+ * of the call. xQueueReceive() will return immediately if xTicksToWait\r
+ * is zero and the queue is empty. The time is defined in tick periods so the\r
+ * constant portTICK_RATE_MS should be used to convert to real time if this is\r
+ * required.\r
+ *\r
+ * @return pdTRUE if an item was successfully received from the queue,\r
+ * otherwise pdFALSE.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ struct AMessage\r
+ {\r
+ char ucMessageID;\r
+ char ucData[ 20 ];\r
+ } xMessage;\r
+\r
+ xQueueHandle xQueue;\r
+\r
+ // Task to create a queue and post a value.\r
+ void vATask( void *pvParameters )\r
+ {\r
+ struct AMessage *pxMessage;\r
+\r
+ // Create a queue capable of containing 10 pointers to AMessage structures.\r
+ // These should be passed by pointer as they contain a lot of data.\r
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
+ if( xQueue == 0 )\r
+ {\r
+ // Failed to create the queue.\r
+ }\r
+\r
+ // ...\r
+\r
+ // Send a pointer to a struct AMessage object. Don't block if the\r
+ // queue is already full.\r
+ pxMessage = & xMessage;\r
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );\r
+\r
+ // ... Rest of task code.\r
+ }\r
+\r
+ // Task to receive from the queue.\r
+ void vADifferentTask( void *pvParameters )\r
+ {\r
+ struct AMessage *pxRxedMessage;\r
+\r
+ if( xQueue != 0 )\r
+ {\r
+ // Receive a message on the created queue. Block for 10 ticks if a\r
+ // message is not immediately available.\r
+ if( xQueueReceive( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )\r
+ {\r
+ // pcRxedMessage now points to the struct AMessage variable posted\r
+ // by vATask.\r
+ }\r
+ }\r
+\r
+ // ... Rest of task code.\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueReceive xQueueReceive\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueueReceive( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdFALSE )\r
+\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueGenericReceive(\r
+ xQueueHandle xQueue,\r
+ void *pvBuffer,\r
+ portTickType xTicksToWait\r
+ portBASE_TYPE xJustPeek\r
+ );</pre>\r
+ *\r
+ * It is preferred that the macro xQueueReceive() be used rather than calling\r
+ * this function directly.\r
+ *\r
+ * Receive an item from a queue. The item is received by copy so a buffer of\r
+ * adequate size must be provided. The number of bytes copied into the buffer\r
+ * was defined when the queue was created.\r
+ *\r
+ * This function must not be used in an interrupt service routine. See\r
+ * xQueueReceiveFromISR for an alternative that can.\r
+ *\r
+ * @param pxQueue The handle to the queue from which the item is to be\r
+ * received.\r
+ *\r
+ * @param pvBuffer Pointer to the buffer into which the received item will\r
+ * be copied.\r
+ *\r
+ * @param xTicksToWait The maximum amount of time the task should block\r
+ * waiting for an item to receive should the queue be empty at the time\r
+ * of the call. The time is defined in tick periods so the constant\r
+ * portTICK_RATE_MS should be used to convert to real time if this is required.\r
+ * xQueueGenericReceive() will return immediately if the queue is empty and\r
+ * xTicksToWait is 0.\r
+ *\r
+ * @param xJustPeek When set to true, the item received from the queue is not\r
+ * actually removed from the queue - meaning a subsequent call to\r
+ * xQueueReceive() will return the same item. When set to false, the item\r
+ * being received from the queue is also removed from the queue.\r
+ *\r
+ * @return pdTRUE if an item was successfully received from the queue,\r
+ * otherwise pdFALSE.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ struct AMessage\r
+ {\r
+ char ucMessageID;\r
+ char ucData[ 20 ];\r
+ } xMessage;\r
+\r
+ xQueueHandle xQueue;\r
+\r
+ // Task to create a queue and post a value.\r
+ void vATask( void *pvParameters )\r
+ {\r
+ struct AMessage *pxMessage;\r
+\r
+ // Create a queue capable of containing 10 pointers to AMessage structures.\r
+ // These should be passed by pointer as they contain a lot of data.\r
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );\r
+ if( xQueue == 0 )\r
+ {\r
+ // Failed to create the queue.\r
+ }\r
+\r
+ // ...\r
+\r
+ // Send a pointer to a struct AMessage object. Don't block if the\r
+ // queue is already full.\r
+ pxMessage = & xMessage;\r
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );\r
+\r
+ // ... Rest of task code.\r
+ }\r
+\r
+ // Task to receive from the queue.\r
+ void vADifferentTask( void *pvParameters )\r
+ {\r
+ struct AMessage *pxRxedMessage;\r
+\r
+ if( xQueue != 0 )\r
+ {\r
+ // Receive a message on the created queue. Block for 10 ticks if a\r
+ // message is not immediately available.\r
+ if( xQueueGenericReceive( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )\r
+ {\r
+ // pcRxedMessage now points to the struct AMessage variable posted\r
+ // by vATask.\r
+ }\r
+ }\r
+\r
+ // ... Rest of task code.\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueReceive xQueueReceive\r
+ * \ingroup QueueManagement\r
+ */\r
+signed portBASE_TYPE xQueueGenericReceive( xQueueHandle xQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeek );\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle xQueue );</pre>\r
+ *\r
+ * Return the number of messages stored in a queue.\r
+ *\r
+ * @param xQueue A handle to the queue being queried.\r
+ *\r
+ * @return The number of messages available in the queue.\r
+ *\r
+ * \page uxQueueMessagesWaiting uxQueueMessagesWaiting\r
+ * \ingroup QueueManagement\r
+ */\r
+unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle xQueue );\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>void vQueueDelete( xQueueHandle xQueue );</pre>\r
+ *\r
+ * Delete a queue - freeing all the memory allocated for storing of items\r
+ * placed on the queue.\r
+ *\r
+ * @param xQueue A handle to the queue to be deleted.\r
+ *\r
+ * \page vQueueDelete vQueueDelete\r
+ * \ingroup QueueManagement\r
+ */\r
+void vQueueDelete( xQueueHandle pxQueue );\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueSendToFrontFromISR(\r
+ xQueueHandle pxQueue,\r
+ const void *pvItemToQueue,\r
+ portBASE_TYPE *pxHigherPriorityTaskWoken\r
+ );\r
+ </pre>\r
+ *\r
+ * This is a macro that calls xQueueGenericSendFromISR().\r
+ *\r
+ * Post an item to the front of a queue. It is safe to use this macro from\r
+ * within an interrupt service routine.\r
+ *\r
+ * Items are queued by copy not reference so it is preferable to only\r
+ * queue small items, especially when called from an ISR. In most cases\r
+ * it would be preferable to store a pointer to the item being queued.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken xQueueSendToFrontFromISR() will set\r
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task\r
+ * to unblock, and the unblocked task has a priority higher than the currently\r
+ * running task. If xQueueSendToFromFromISR() sets this value to pdTRUE then\r
+ * a context switch should be requested before the interrupt is exited.\r
+ *\r
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise\r
+ * errQUEUE_FULL.\r
+ *\r
+ * Example usage for buffered IO (where the ISR can obtain more than one value\r
+ * per call):\r
+ <pre>\r
+ void vBufferISR( void )\r
+ {\r
+ char cIn;\r
+ portBASE_TYPE xHigherPrioritTaskWoken;\r
+\r
+ // We have not woken a task at the start of the ISR.\r
+ xHigherPriorityTaskWoken = pdFALSE;\r
+\r
+ // Loop until the buffer is empty.\r
+ do\r
+ {\r
+ // Obtain a byte from the buffer.\r
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );\r
+\r
+ // Post the byte.\r
+ xQueueSendToFrontFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );\r
+\r
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );\r
+\r
+ // Now the buffer is empty we can switch context if necessary.\r
+ if( xHigherPriorityTaskWoken )\r
+ {\r
+ taskYIELD ();\r
+ }\r
+ }\r
+ </pre>\r
+ *\r
+ * \defgroup xQueueSendFromISR xQueueSendFromISR\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueueSendToFrontFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_FRONT )\r
+\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueSendToBackFromISR(\r
+ xQueueHandle pxQueue,\r
+ const void *pvItemToQueue,\r
+ portBASE_TYPE *pxHigherPriorityTaskWoken\r
+ );\r
+ </pre>\r
+ *\r
+ * This is a macro that calls xQueueGenericSendFromISR().\r
+ *\r
+ * Post an item to the back of a queue. It is safe to use this macro from\r
+ * within an interrupt service routine.\r
+ *\r
+ * Items are queued by copy not reference so it is preferable to only\r
+ * queue small items, especially when called from an ISR. In most cases\r
+ * it would be preferable to store a pointer to the item being queued.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken xQueueSendToBackFromISR() will set\r
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task\r
+ * to unblock, and the unblocked task has a priority higher than the currently\r
+ * running task. If xQueueSendToBackFromISR() sets this value to pdTRUE then\r
+ * a context switch should be requested before the interrupt is exited.\r
+ *\r
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise\r
+ * errQUEUE_FULL.\r
+ *\r
+ * Example usage for buffered IO (where the ISR can obtain more than one value\r
+ * per call):\r
+ <pre>\r
+ void vBufferISR( void )\r
+ {\r
+ char cIn;\r
+ portBASE_TYPE xHigherPriorityTaskWoken;\r
+\r
+ // We have not woken a task at the start of the ISR.\r
+ xHigherPriorityTaskWoken = pdFALSE;\r
+\r
+ // Loop until the buffer is empty.\r
+ do\r
+ {\r
+ // Obtain a byte from the buffer.\r
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );\r
+\r
+ // Post the byte.\r
+ xQueueSendToBackFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );\r
+\r
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );\r
+\r
+ // Now the buffer is empty we can switch context if necessary.\r
+ if( xHigherPriorityTaskWoken )\r
+ {\r
+ taskYIELD ();\r
+ }\r
+ }\r
+ </pre>\r
+ *\r
+ * \defgroup xQueueSendFromISR xQueueSendFromISR\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueueSendToBackFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueSendFromISR(\r
+ xQueueHandle pxQueue,\r
+ const void *pvItemToQueue,\r
+ portBASE_TYPE *pxHigherPriorityTaskWoken\r
+ );\r
+ </pre>\r
+ *\r
+ * This is a macro that calls xQueueGenericSendFromISR(). It is included\r
+ * for backward compatibility with versions of FreeRTOS.org that did not\r
+ * include the xQueueSendToBackFromISR() and xQueueSendToFrontFromISR()\r
+ * macros.\r
+ *\r
+ * Post an item to the back of a queue. It is safe to use this function from\r
+ * within an interrupt service routine.\r
+ *\r
+ * Items are queued by copy not reference so it is preferable to only\r
+ * queue small items, especially when called from an ISR. In most cases\r
+ * it would be preferable to store a pointer to the item being queued.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken xQueueSendFromISR() will set\r
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task\r
+ * to unblock, and the unblocked task has a priority higher than the currently\r
+ * running task. If xQueueSendFromISR() sets this value to pdTRUE then\r
+ * a context switch should be requested before the interrupt is exited.\r
+ *\r
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise\r
+ * errQUEUE_FULL.\r
+ *\r
+ * Example usage for buffered IO (where the ISR can obtain more than one value\r
+ * per call):\r
+ <pre>\r
+ void vBufferISR( void )\r
+ {\r
+ char cIn;\r
+ portBASE_TYPE xHigherPriorityTaskWoken;\r
+\r
+ // We have not woken a task at the start of the ISR.\r
+ xHigherPriorityTaskWoken = pdFALSE;\r
+\r
+ // Loop until the buffer is empty.\r
+ do\r
+ {\r
+ // Obtain a byte from the buffer.\r
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );\r
+\r
+ // Post the byte.\r
+ xQueueSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );\r
+\r
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );\r
+\r
+ // Now the buffer is empty we can switch context if necessary.\r
+ if( xHigherPriorityTaskWoken )\r
+ {\r
+ // Actual macro used here is port specific.\r
+ taskYIELD_FROM_ISR ();\r
+ }\r
+ }\r
+ </pre>\r
+ *\r
+ * \defgroup xQueueSendFromISR xQueueSendFromISR\r
+ * \ingroup QueueManagement\r
+ */\r
+#define xQueueSendFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueGenericSendFromISR(\r
+ xQueueHandle pxQueue,\r
+ const void *pvItemToQueue,\r
+ portBASE_TYPE *pxHigherPriorityTaskWoken,\r
+ portBASE_TYPE xCopyPosition\r
+ );\r
+ </pre>\r
+ *\r
+ * It is preferred that the macros xQueueSendFromISR(),\r
+ * xQueueSendToFrontFromISR() and xQueueSendToBackFromISR() be used in place\r
+ * of calling this function directly.\r
+ *\r
+ * Post an item on a queue. It is safe to use this function from within an\r
+ * interrupt service routine.\r
+ *\r
+ * Items are queued by copy not reference so it is preferable to only\r
+ * queue small items, especially when called from an ISR. In most cases\r
+ * it would be preferable to store a pointer to the item being queued.\r
+ *\r
+ * @param xQueue The handle to the queue on which the item is to be posted.\r
+ *\r
+ * @param pvItemToQueue A pointer to the item that is to be placed on the\r
+ * queue. The size of the items the queue will hold was defined when the\r
+ * queue was created, so this many bytes will be copied from pvItemToQueue\r
+ * into the queue storage area.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken xQueueGenericSendFromISR() will set\r
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task\r
+ * to unblock, and the unblocked task has a priority higher than the currently\r
+ * running task. If xQueueGenericSendFromISR() sets this value to pdTRUE then\r
+ * a context switch should be requested before the interrupt is exited.\r
+ *\r
+ * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the\r
+ * item at the back of the queue, or queueSEND_TO_FRONT to place the item\r
+ * at the front of the queue (for high priority messages).\r
+ *\r
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise\r
+ * errQUEUE_FULL.\r
+ *\r
+ * Example usage for buffered IO (where the ISR can obtain more than one value\r
+ * per call):\r
+ <pre>\r
+ void vBufferISR( void )\r
+ {\r
+ char cIn;\r
+ portBASE_TYPE xHigherPriorityTaskWokenByPost;\r
+\r
+ // We have not woken a task at the start of the ISR.\r
+ xHigherPriorityTaskWokenByPost = pdFALSE;\r
+\r
+ // Loop until the buffer is empty.\r
+ do\r
+ {\r
+ // Obtain a byte from the buffer.\r
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );\r
+\r
+ // Post each byte.\r
+ xQueueGenericSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWokenByPost, queueSEND_TO_BACK );\r
+\r
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );\r
+\r
+ // Now the buffer is empty we can switch context if necessary. Note that the\r
+ // name of the yield function required is port specific.\r
+ if( xHigherPriorityTaskWokenByPost )\r
+ {\r
+ taskYIELD_YIELD_FROM_ISR();\r
+ }\r
+ }\r
+ </pre>\r
+ *\r
+ * \defgroup xQueueSendFromISR xQueueSendFromISR\r
+ * \ingroup QueueManagement\r
+ */\r
+signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition );\r
+\r
+/**\r
+ * queue. h\r
+ * <pre>\r
+ portBASE_TYPE xQueueReceiveFromISR(\r
+ xQueueHandle pxQueue,\r
+ void *pvBuffer,\r
+ portBASE_TYPE *pxTaskWoken\r
+ );\r
+ * </pre>\r
+ *\r
+ * Receive an item from a queue. It is safe to use this function from within an\r
+ * interrupt service routine.\r
+ *\r
+ * @param pxQueue The handle to the queue from which the item is to be\r
+ * received.\r
+ *\r
+ * @param pvBuffer Pointer to the buffer into which the received item will\r
+ * be copied.\r
+ *\r
+ * @param pxTaskWoken A task may be blocked waiting for space to become\r
+ * available on the queue. If xQueueReceiveFromISR causes such a task to\r
+ * unblock *pxTaskWoken will get set to pdTRUE, otherwise *pxTaskWoken will\r
+ * remain unchanged.\r
+ *\r
+ * @return pdTRUE if an item was successfully received from the queue,\r
+ * otherwise pdFALSE.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+\r
+ xQueueHandle xQueue;\r
+\r
+ // Function to create a queue and post some values.\r
+ void vAFunction( void *pvParameters )\r
+ {\r
+ char cValueToPost;\r
+ const portTickType xBlockTime = ( portTickType )0xff;\r
+\r
+ // Create a queue capable of containing 10 characters.\r
+ xQueue = xQueueCreate( 10, sizeof( char ) );\r
+ if( xQueue == 0 )\r
+ {\r
+ // Failed to create the queue.\r
+ }\r
+\r
+ // ...\r
+\r
+ // Post some characters that will be used within an ISR. If the queue\r
+ // is full then this task will block for xBlockTime ticks.\r
+ cValueToPost = 'a';\r
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );\r
+ cValueToPost = 'b';\r
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );\r
+\r
+ // ... keep posting characters ... this task may block when the queue\r
+ // becomes full.\r
+\r
+ cValueToPost = 'c';\r
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );\r
+ }\r
+\r
+ // ISR that outputs all the characters received on the queue.\r
+ void vISR_Routine( void )\r
+ {\r
+ portBASE_TYPE xTaskWokenByReceive = pdFALSE;\r
+ char cRxedChar;\r
+\r
+ while( xQueueReceiveFromISR( xQueue, ( void * ) &cRxedChar, &xTaskWokenByReceive) )\r
+ {\r
+ // A character was received. Output the character now.\r
+ vOutputCharacter( cRxedChar );\r
+\r
+ // If removing the character from the queue woke the task that was\r
+ // posting onto the queue cTaskWokenByReceive will have been set to\r
+ // pdTRUE. No matter how many times this loop iterates only one\r
+ // task will be woken.\r
+ }\r
+\r
+ if( cTaskWokenByPost != ( char ) pdFALSE;\r
+ {\r
+ taskYIELD ();\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xQueueReceiveFromISR xQueueReceiveFromISR\r
+ * \ingroup QueueManagement\r
+ */\r
+signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxHigherPriorityTaskWoken );\r
+\r
+/*\r
+ * Utilities to query queues that are safe to use from an ISR. These utilities\r
+ * should be used only from witin an ISR, or within a critical section.\r
+ */\r
+signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue );\r
+signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue );\r
+unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue );\r
+\r
+\r
+/*\r
+ * xQueueAltGenericSend() is an alternative version of xQueueGenericSend().\r
+ * Likewise xQueueAltGenericReceive() is an alternative version of\r
+ * xQueueGenericReceive().\r
+ *\r
+ * The source code that implements the alternative (Alt) API is much\r
+ * simpler because it executes everything from within a critical section.\r
+ * This is the approach taken by many other RTOSes, but FreeRTOS.org has the\r
+ * preferred fully featured API too. The fully featured API has more\r
+ * complex code that takes longer to execute, but makes much less use of\r
+ * critical sections. Therefore the alternative API sacrifices interrupt\r
+ * responsiveness to gain execution speed, whereas the fully featured API\r
+ * sacrifices execution speed to ensure better interrupt responsiveness.\r
+ */\r
+signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition );\r
+signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking );\r
+#define xQueueAltSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueAltGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_FRONT )\r
+#define xQueueAltSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueAltGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )\r
+#define xQueueAltReceive( xQueue, pvBuffer, xTicksToWait ) xQueueAltGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdFALSE )\r
+#define xQueueAltPeek( xQueue, pvBuffer, xTicksToWait ) xQueueAltGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdTRUE )\r
+\r
+/*\r
+ * The functions defined above are for passing data to and from tasks. The\r
+ * functions below are the equivalents for passing data to and from\r
+ * co-routines.\r
+ *\r
+ * These functions are called from the co-routine macro implementation and\r
+ * should not be called directly from application code. Instead use the macro\r
+ * wrappers defined within croutine.h.\r
+ */\r
+signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken );\r
+signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxTaskWoken );\r
+signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait );\r
+signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait );\r
+\r
+/*\r
+ * For internal use only. Use xSemaphoreCreateMutex(), \r
+ * xSemaphoreCreateCounting() or xSemaphoreGetMutexHolder() instead of calling \r
+ * these functions directly.\r
+ */\r
+xQueueHandle xQueueCreateMutex( unsigned char ucQueueType );\r
+xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount );\r
+void* xQueueGetMutexHolder( xQueueHandle xSemaphore );\r
+\r
+/*\r
+ * For internal use only. Use xSemaphoreTakeMutexRecursive() or\r
+ * xSemaphoreGiveMutexRecursive() instead of calling these functions directly.\r
+ */\r
+portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle pxMutex, portTickType xBlockTime );\r
+portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle pxMutex );\r
+\r
+/*\r
+ * Reset a queue back to its original empty state. pdPASS is returned if the\r
+ * queue is successfully reset. pdFAIL is returned if the queue could not be\r
+ * reset because there are tasks blocked on the queue waiting to either\r
+ * receive from the queue or send to the queue.\r
+ */\r
+#define xQueueReset( pxQueue ) xQueueGenericReset( pxQueue, pdFALSE )\r
+\r
+/*\r
+ * The registry is provided as a means for kernel aware debuggers to\r
+ * locate queues, semaphores and mutexes. Call vQueueAddToRegistry() add\r
+ * a queue, semaphore or mutex handle to the registry if you want the handle\r
+ * to be available to a kernel aware debugger. If you are not using a kernel\r
+ * aware debugger then this function can be ignored.\r
+ *\r
+ * configQUEUE_REGISTRY_SIZE defines the maximum number of handles the\r
+ * registry can hold. configQUEUE_REGISTRY_SIZE must be greater than 0\r
+ * within FreeRTOSConfig.h for the registry to be available. Its value\r
+ * does not effect the number of queues, semaphores and mutexes that can be\r
+ * created - just the number that the registry can hold.\r
+ *\r
+ * @param xQueue The handle of the queue being added to the registry. This\r
+ * is the handle returned by a call to xQueueCreate(). Semaphore and mutex\r
+ * handles can also be passed in here.\r
+ *\r
+ * @param pcName The name to be associated with the handle. This is the\r
+ * name that the kernel aware debugger will display.\r
+ */\r
+#if configQUEUE_REGISTRY_SIZE > 0U\r
+ void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcName );\r
+#endif\r
+\r
+/*\r
+ * Generic version of the queue creation function, which is in turn called by \r
+ * any queue, semaphore or mutex creation function or macro.\r
+ */\r
+xQueueHandle xQueueGenericCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize, unsigned char ucQueueType );\r
+\r
+/* Not public API functions. */\r
+void vQueueWaitForMessageRestricted( xQueueHandle pxQueue, portTickType xTicksToWait );\r
+portBASE_TYPE xQueueGenericReset( xQueueHandle pxQueue, portBASE_TYPE xNewQueue );\r
+\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+\r
+#endif /* QUEUE_H */\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+#ifndef SEMAPHORE_H\r
+#define SEMAPHORE_H\r
+\r
+#ifndef INC_FREERTOS_H\r
+ #error "include FreeRTOS.h" must appear in source files before "include semphr.h"\r
+#endif\r
+\r
+#include "queue.h"\r
+\r
+typedef xQueueHandle xSemaphoreHandle;\r
+\r
+#define semBINARY_SEMAPHORE_QUEUE_LENGTH ( ( unsigned char ) 1U )\r
+#define semSEMAPHORE_QUEUE_ITEM_LENGTH ( ( unsigned char ) 0U )\r
+#define semGIVE_BLOCK_TIME ( ( portTickType ) 0U )\r
+\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>vSemaphoreCreateBinary( xSemaphoreHandle xSemaphore )</pre>\r
+ *\r
+ * <i>Macro</i> that implements a semaphore by using the existing queue mechanism.\r
+ * The queue length is 1 as this is a binary semaphore. The data size is 0\r
+ * as we don't want to actually store any data - we just want to know if the\r
+ * queue is empty or full.\r
+ *\r
+ * This type of semaphore can be used for pure synchronisation between tasks or\r
+ * between an interrupt and a task. The semaphore need not be given back once\r
+ * obtained, so one task/interrupt can continuously 'give' the semaphore while\r
+ * another continuously 'takes' the semaphore. For this reason this type of\r
+ * semaphore does not use a priority inheritance mechanism. For an alternative\r
+ * that does use priority inheritance see xSemaphoreCreateMutex().\r
+ *\r
+ * @param xSemaphore Handle to the created semaphore. Should be of type xSemaphoreHandle.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ xSemaphoreHandle xSemaphore;\r
+\r
+ void vATask( void * pvParameters )\r
+ {\r
+ // Semaphore cannot be used before a call to vSemaphoreCreateBinary ().\r
+ // This is a macro so pass the variable in directly.\r
+ vSemaphoreCreateBinary( xSemaphore );\r
+\r
+ if( xSemaphore != NULL )\r
+ {\r
+ // The semaphore was created successfully.\r
+ // The semaphore can now be used. \r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup vSemaphoreCreateBinary vSemaphoreCreateBinary\r
+ * \ingroup Semaphores\r
+ */\r
+#define vSemaphoreCreateBinary( xSemaphore ) \\r
+ { \\r
+ ( xSemaphore ) = xQueueGenericCreate( ( unsigned portBASE_TYPE ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE ); \\r
+ if( ( xSemaphore ) != NULL ) \\r
+ { \\r
+ xSemaphoreGive( ( xSemaphore ) ); \\r
+ } \\r
+ }\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>xSemaphoreTake( \r
+ * xSemaphoreHandle xSemaphore, \r
+ * portTickType xBlockTime \r
+ * )</pre>\r
+ *\r
+ * <i>Macro</i> to obtain a semaphore. The semaphore must have previously been\r
+ * created with a call to vSemaphoreCreateBinary(), xSemaphoreCreateMutex() or\r
+ * xSemaphoreCreateCounting().\r
+ *\r
+ * @param xSemaphore A handle to the semaphore being taken - obtained when\r
+ * the semaphore was created.\r
+ *\r
+ * @param xBlockTime The time in ticks to wait for the semaphore to become\r
+ * available. The macro portTICK_RATE_MS can be used to convert this to a\r
+ * real time. A block time of zero can be used to poll the semaphore. A block\r
+ * time of portMAX_DELAY can be used to block indefinitely (provided\r
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h).\r
+ *\r
+ * @return pdTRUE if the semaphore was obtained. pdFALSE\r
+ * if xBlockTime expired without the semaphore becoming available.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ xSemaphoreHandle xSemaphore = NULL;\r
+\r
+ // A task that creates a semaphore.\r
+ void vATask( void * pvParameters )\r
+ {\r
+ // Create the semaphore to guard a shared resource.\r
+ vSemaphoreCreateBinary( xSemaphore );\r
+ }\r
+\r
+ // A task that uses the semaphore.\r
+ void vAnotherTask( void * pvParameters )\r
+ {\r
+ // ... Do other things.\r
+\r
+ if( xSemaphore != NULL )\r
+ {\r
+ // See if we can obtain the semaphore. If the semaphore is not available\r
+ // wait 10 ticks to see if it becomes free. \r
+ if( xSemaphoreTake( xSemaphore, ( portTickType ) 10 ) == pdTRUE )\r
+ {\r
+ // We were able to obtain the semaphore and can now access the\r
+ // shared resource.\r
+\r
+ // ...\r
+\r
+ // We have finished accessing the shared resource. Release the \r
+ // semaphore.\r
+ xSemaphoreGive( xSemaphore );\r
+ }\r
+ else\r
+ {\r
+ // We could not obtain the semaphore and can therefore not access\r
+ // the shared resource safely.\r
+ }\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xSemaphoreTake xSemaphoreTake\r
+ * \ingroup Semaphores\r
+ */\r
+#define xSemaphoreTake( xSemaphore, xBlockTime ) xQueueGenericReceive( ( xQueueHandle ) ( xSemaphore ), NULL, ( xBlockTime ), pdFALSE )\r
+\r
+/**\r
+ * semphr. h\r
+ * xSemaphoreTakeRecursive( \r
+ * xSemaphoreHandle xMutex, \r
+ * portTickType xBlockTime \r
+ * )\r
+ *\r
+ * <i>Macro</i> to recursively obtain, or 'take', a mutex type semaphore. \r
+ * The mutex must have previously been created using a call to \r
+ * xSemaphoreCreateRecursiveMutex();\r
+ * \r
+ * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this\r
+ * macro to be available.\r
+ * \r
+ * This macro must not be used on mutexes created using xSemaphoreCreateMutex().\r
+ *\r
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex \r
+ * doesn't become available again until the owner has called \r
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example, \r
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will \r
+ * not be available to any other task until it has also 'given' the mutex back\r
+ * exactly five times.\r
+ *\r
+ * @param xMutex A handle to the mutex being obtained. This is the\r
+ * handle returned by xSemaphoreCreateRecursiveMutex();\r
+ *\r
+ * @param xBlockTime The time in ticks to wait for the semaphore to become\r
+ * available. The macro portTICK_RATE_MS can be used to convert this to a\r
+ * real time. A block time of zero can be used to poll the semaphore. If\r
+ * the task already owns the semaphore then xSemaphoreTakeRecursive() will\r
+ * return immediately no matter what the value of xBlockTime. \r
+ *\r
+ * @return pdTRUE if the semaphore was obtained. pdFALSE if xBlockTime\r
+ * expired without the semaphore becoming available.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ xSemaphoreHandle xMutex = NULL;\r
+\r
+ // A task that creates a mutex.\r
+ void vATask( void * pvParameters )\r
+ {\r
+ // Create the mutex to guard a shared resource.\r
+ xMutex = xSemaphoreCreateRecursiveMutex();\r
+ }\r
+\r
+ // A task that uses the mutex.\r
+ void vAnotherTask( void * pvParameters )\r
+ {\r
+ // ... Do other things.\r
+\r
+ if( xMutex != NULL )\r
+ {\r
+ // See if we can obtain the mutex. If the mutex is not available\r
+ // wait 10 ticks to see if it becomes free. \r
+ if( xSemaphoreTakeRecursive( xSemaphore, ( portTickType ) 10 ) == pdTRUE )\r
+ {\r
+ // We were able to obtain the mutex and can now access the\r
+ // shared resource.\r
+\r
+ // ...\r
+ // For some reason due to the nature of the code further calls to \r
+ // xSemaphoreTakeRecursive() are made on the same mutex. In real\r
+ // code these would not be just sequential calls as this would make\r
+ // no sense. Instead the calls are likely to be buried inside\r
+ // a more complex call structure.\r
+ xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );\r
+ xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );\r
+\r
+ // The mutex has now been 'taken' three times, so will not be \r
+ // available to another task until it has also been given back\r
+ // three times. Again it is unlikely that real code would have\r
+ // these calls sequentially, but instead buried in a more complex\r
+ // call structure. This is just for illustrative purposes.\r
+ xSemaphoreGiveRecursive( xMutex );\r
+ xSemaphoreGiveRecursive( xMutex );\r
+ xSemaphoreGiveRecursive( xMutex );\r
+\r
+ // Now the mutex can be taken by other tasks.\r
+ }\r
+ else\r
+ {\r
+ // We could not obtain the mutex and can therefore not access\r
+ // the shared resource safely.\r
+ }\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xSemaphoreTakeRecursive xSemaphoreTakeRecursive\r
+ * \ingroup Semaphores\r
+ */\r
+#define xSemaphoreTakeRecursive( xMutex, xBlockTime ) xQueueTakeMutexRecursive( ( xMutex ), ( xBlockTime ) )\r
+\r
+\r
+/* \r
+ * xSemaphoreAltTake() is an alternative version of xSemaphoreTake().\r
+ *\r
+ * The source code that implements the alternative (Alt) API is much \r
+ * simpler because it executes everything from within a critical section. \r
+ * This is the approach taken by many other RTOSes, but FreeRTOS.org has the \r
+ * preferred fully featured API too. The fully featured API has more \r
+ * complex code that takes longer to execute, but makes much less use of \r
+ * critical sections. Therefore the alternative API sacrifices interrupt \r
+ * responsiveness to gain execution speed, whereas the fully featured API\r
+ * sacrifices execution speed to ensure better interrupt responsiveness.\r
+ */\r
+#define xSemaphoreAltTake( xSemaphore, xBlockTime ) xQueueAltGenericReceive( ( xQueueHandle ) ( xSemaphore ), NULL, ( xBlockTime ), pdFALSE )\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>xSemaphoreGive( xSemaphoreHandle xSemaphore )</pre>\r
+ *\r
+ * <i>Macro</i> to release a semaphore. The semaphore must have previously been\r
+ * created with a call to vSemaphoreCreateBinary(), xSemaphoreCreateMutex() or\r
+ * xSemaphoreCreateCounting(). and obtained using sSemaphoreTake().\r
+ *\r
+ * This macro must not be used from an ISR. See xSemaphoreGiveFromISR () for\r
+ * an alternative which can be used from an ISR.\r
+ *\r
+ * This macro must also not be used on semaphores created using \r
+ * xSemaphoreCreateRecursiveMutex().\r
+ *\r
+ * @param xSemaphore A handle to the semaphore being released. This is the\r
+ * handle returned when the semaphore was created.\r
+ *\r
+ * @return pdTRUE if the semaphore was released. pdFALSE if an error occurred.\r
+ * Semaphores are implemented using queues. An error can occur if there is\r
+ * no space on the queue to post a message - indicating that the \r
+ * semaphore was not first obtained correctly.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ xSemaphoreHandle xSemaphore = NULL;\r
+\r
+ void vATask( void * pvParameters )\r
+ {\r
+ // Create the semaphore to guard a shared resource.\r
+ vSemaphoreCreateBinary( xSemaphore );\r
+\r
+ if( xSemaphore != NULL )\r
+ {\r
+ if( xSemaphoreGive( xSemaphore ) != pdTRUE )\r
+ {\r
+ // We would expect this call to fail because we cannot give\r
+ // a semaphore without first "taking" it!\r
+ }\r
+\r
+ // Obtain the semaphore - don't block if the semaphore is not\r
+ // immediately available.\r
+ if( xSemaphoreTake( xSemaphore, ( portTickType ) 0 ) )\r
+ {\r
+ // We now have the semaphore and can access the shared resource.\r
+\r
+ // ...\r
+\r
+ // We have finished accessing the shared resource so can free the\r
+ // semaphore.\r
+ if( xSemaphoreGive( xSemaphore ) != pdTRUE )\r
+ {\r
+ // We would not expect this call to fail because we must have\r
+ // obtained the semaphore to get here.\r
+ }\r
+ }\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xSemaphoreGive xSemaphoreGive\r
+ * \ingroup Semaphores\r
+ */\r
+#define xSemaphoreGive( xSemaphore ) xQueueGenericSend( ( xQueueHandle ) ( xSemaphore ), NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK )\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>xSemaphoreGiveRecursive( xSemaphoreHandle xMutex )</pre>\r
+ *\r
+ * <i>Macro</i> to recursively release, or 'give', a mutex type semaphore.\r
+ * The mutex must have previously been created using a call to \r
+ * xSemaphoreCreateRecursiveMutex();\r
+ * \r
+ * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this\r
+ * macro to be available.\r
+ *\r
+ * This macro must not be used on mutexes created using xSemaphoreCreateMutex().\r
+ * \r
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex \r
+ * doesn't become available again until the owner has called \r
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example, \r
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will \r
+ * not be available to any other task until it has also 'given' the mutex back\r
+ * exactly five times.\r
+ *\r
+ * @param xMutex A handle to the mutex being released, or 'given'. This is the\r
+ * handle returned by xSemaphoreCreateMutex();\r
+ *\r
+ * @return pdTRUE if the semaphore was given.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ xSemaphoreHandle xMutex = NULL;\r
+\r
+ // A task that creates a mutex.\r
+ void vATask( void * pvParameters )\r
+ {\r
+ // Create the mutex to guard a shared resource.\r
+ xMutex = xSemaphoreCreateRecursiveMutex();\r
+ }\r
+\r
+ // A task that uses the mutex.\r
+ void vAnotherTask( void * pvParameters )\r
+ {\r
+ // ... Do other things.\r
+\r
+ if( xMutex != NULL )\r
+ {\r
+ // See if we can obtain the mutex. If the mutex is not available\r
+ // wait 10 ticks to see if it becomes free. \r
+ if( xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 ) == pdTRUE )\r
+ {\r
+ // We were able to obtain the mutex and can now access the\r
+ // shared resource.\r
+\r
+ // ...\r
+ // For some reason due to the nature of the code further calls to \r
+ // xSemaphoreTakeRecursive() are made on the same mutex. In real\r
+ // code these would not be just sequential calls as this would make\r
+ // no sense. Instead the calls are likely to be buried inside\r
+ // a more complex call structure.\r
+ xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );\r
+ xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );\r
+\r
+ // The mutex has now been 'taken' three times, so will not be \r
+ // available to another task until it has also been given back\r
+ // three times. Again it is unlikely that real code would have\r
+ // these calls sequentially, it would be more likely that the calls\r
+ // to xSemaphoreGiveRecursive() would be called as a call stack\r
+ // unwound. This is just for demonstrative purposes.\r
+ xSemaphoreGiveRecursive( xMutex );\r
+ xSemaphoreGiveRecursive( xMutex );\r
+ xSemaphoreGiveRecursive( xMutex );\r
+\r
+ // Now the mutex can be taken by other tasks.\r
+ }\r
+ else\r
+ {\r
+ // We could not obtain the mutex and can therefore not access\r
+ // the shared resource safely.\r
+ }\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xSemaphoreGiveRecursive xSemaphoreGiveRecursive\r
+ * \ingroup Semaphores\r
+ */\r
+#define xSemaphoreGiveRecursive( xMutex ) xQueueGiveMutexRecursive( ( xMutex ) )\r
+\r
+/* \r
+ * xSemaphoreAltGive() is an alternative version of xSemaphoreGive().\r
+ *\r
+ * The source code that implements the alternative (Alt) API is much \r
+ * simpler because it executes everything from within a critical section. \r
+ * This is the approach taken by many other RTOSes, but FreeRTOS.org has the \r
+ * preferred fully featured API too. The fully featured API has more \r
+ * complex code that takes longer to execute, but makes much less use of \r
+ * critical sections. Therefore the alternative API sacrifices interrupt \r
+ * responsiveness to gain execution speed, whereas the fully featured API\r
+ * sacrifices execution speed to ensure better interrupt responsiveness.\r
+ */\r
+#define xSemaphoreAltGive( xSemaphore ) xQueueAltGenericSend( ( xQueueHandle ) ( xSemaphore ), NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK )\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>\r
+ xSemaphoreGiveFromISR( \r
+ xSemaphoreHandle xSemaphore, \r
+ signed portBASE_TYPE *pxHigherPriorityTaskWoken\r
+ )</pre>\r
+ *\r
+ * <i>Macro</i> to release a semaphore. The semaphore must have previously been\r
+ * created with a call to vSemaphoreCreateBinary() or xSemaphoreCreateCounting().\r
+ *\r
+ * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())\r
+ * must not be used with this macro.\r
+ *\r
+ * This macro can be used from an ISR.\r
+ *\r
+ * @param xSemaphore A handle to the semaphore being released. This is the\r
+ * handle returned when the semaphore was created.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken xSemaphoreGiveFromISR() will set\r
+ * *pxHigherPriorityTaskWoken to pdTRUE if giving the semaphore caused a task\r
+ * to unblock, and the unblocked task has a priority higher than the currently\r
+ * running task. If xSemaphoreGiveFromISR() sets this value to pdTRUE then\r
+ * a context switch should be requested before the interrupt is exited.\r
+ *\r
+ * @return pdTRUE if the semaphore was successfully given, otherwise errQUEUE_FULL.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ \#define LONG_TIME 0xffff\r
+ \#define TICKS_TO_WAIT 10\r
+ xSemaphoreHandle xSemaphore = NULL;\r
+\r
+ // Repetitive task.\r
+ void vATask( void * pvParameters )\r
+ {\r
+ for( ;; )\r
+ {\r
+ // We want this task to run every 10 ticks of a timer. The semaphore \r
+ // was created before this task was started.\r
+\r
+ // Block waiting for the semaphore to become available.\r
+ if( xSemaphoreTake( xSemaphore, LONG_TIME ) == pdTRUE )\r
+ {\r
+ // It is time to execute.\r
+\r
+ // ...\r
+\r
+ // We have finished our task. Return to the top of the loop where\r
+ // we will block on the semaphore until it is time to execute \r
+ // again. Note when using the semaphore for synchronisation with an\r
+ // ISR in this manner there is no need to 'give' the semaphore back.\r
+ }\r
+ }\r
+ }\r
+\r
+ // Timer ISR\r
+ void vTimerISR( void * pvParameters )\r
+ {\r
+ static unsigned char ucLocalTickCount = 0;\r
+ static signed portBASE_TYPE xHigherPriorityTaskWoken;\r
+\r
+ // A timer tick has occurred.\r
+\r
+ // ... Do other time functions.\r
+\r
+ // Is it time for vATask () to run?\r
+ xHigherPriorityTaskWoken = pdFALSE;\r
+ ucLocalTickCount++;\r
+ if( ucLocalTickCount >= TICKS_TO_WAIT )\r
+ {\r
+ // Unblock the task by releasing the semaphore.\r
+ xSemaphoreGiveFromISR( xSemaphore, &xHigherPriorityTaskWoken );\r
+\r
+ // Reset the count so we release the semaphore again in 10 ticks time.\r
+ ucLocalTickCount = 0;\r
+ }\r
+\r
+ if( xHigherPriorityTaskWoken != pdFALSE )\r
+ {\r
+ // We can force a context switch here. Context switching from an\r
+ // ISR uses port specific syntax. Check the demo task for your port\r
+ // to find the syntax required.\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xSemaphoreGiveFromISR xSemaphoreGiveFromISR\r
+ * \ingroup Semaphores\r
+ */\r
+#define xSemaphoreGiveFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueueHandle ) ( xSemaphore ), NULL, ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>\r
+ xSemaphoreTakeFromISR( \r
+ xSemaphoreHandle xSemaphore, \r
+ signed portBASE_TYPE *pxHigherPriorityTaskWoken\r
+ )</pre>\r
+ *\r
+ * <i>Macro</i> to take a semaphore from an ISR. The semaphore must have \r
+ * previously been created with a call to vSemaphoreCreateBinary() or \r
+ * xSemaphoreCreateCounting().\r
+ *\r
+ * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())\r
+ * must not be used with this macro.\r
+ *\r
+ * This macro can be used from an ISR, however taking a semaphore from an ISR\r
+ * is not a common operation. It is likely to only be useful when taking a\r
+ * counting semaphore when an interrupt is obtaining an object from a resource\r
+ * pool (when the semaphore count indicates the number of resources available).\r
+ *\r
+ * @param xSemaphore A handle to the semaphore being taken. This is the\r
+ * handle returned when the semaphore was created.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken xSemaphoreTakeFromISR() will set\r
+ * *pxHigherPriorityTaskWoken to pdTRUE if taking the semaphore caused a task\r
+ * to unblock, and the unblocked task has a priority higher than the currently\r
+ * running task. If xSemaphoreTakeFromISR() sets this value to pdTRUE then\r
+ * a context switch should be requested before the interrupt is exited.\r
+ *\r
+ * @return pdTRUE if the semaphore was successfully taken, otherwise \r
+ * pdFALSE\r
+ */\r
+#define xSemaphoreTakeFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueReceiveFromISR( ( xQueueHandle ) ( xSemaphore ), NULL, ( pxHigherPriorityTaskWoken ) )\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>xSemaphoreHandle xSemaphoreCreateMutex( void )</pre>\r
+ *\r
+ * <i>Macro</i> that implements a mutex semaphore by using the existing queue \r
+ * mechanism.\r
+ *\r
+ * Mutexes created using this macro can be accessed using the xSemaphoreTake()\r
+ * and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and \r
+ * xSemaphoreGiveRecursive() macros should not be used.\r
+ * \r
+ * This type of semaphore uses a priority inheritance mechanism so a task \r
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the \r
+ * semaphore it is no longer required. \r
+ *\r
+ * Mutex type semaphores cannot be used from within interrupt service routines. \r
+ *\r
+ * See vSemaphoreCreateBinary() for an alternative implementation that can be \r
+ * used for pure synchronisation (where one task or interrupt always 'gives' the \r
+ * semaphore and another always 'takes' the semaphore) and from within interrupt \r
+ * service routines.\r
+ *\r
+ * @return xSemaphore Handle to the created mutex semaphore. Should be of type \r
+ * xSemaphoreHandle.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ xSemaphoreHandle xSemaphore;\r
+\r
+ void vATask( void * pvParameters )\r
+ {\r
+ // Semaphore cannot be used before a call to xSemaphoreCreateMutex().\r
+ // This is a macro so pass the variable in directly.\r
+ xSemaphore = xSemaphoreCreateMutex();\r
+\r
+ if( xSemaphore != NULL )\r
+ {\r
+ // The semaphore was created successfully.\r
+ // The semaphore can now be used. \r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup vSemaphoreCreateMutex vSemaphoreCreateMutex\r
+ * \ingroup Semaphores\r
+ */\r
+#define xSemaphoreCreateMutex() xQueueCreateMutex( queueQUEUE_TYPE_MUTEX )\r
+\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>xSemaphoreHandle xSemaphoreCreateRecursiveMutex( void )</pre>\r
+ *\r
+ * <i>Macro</i> that implements a recursive mutex by using the existing queue \r
+ * mechanism.\r
+ *\r
+ * Mutexes created using this macro can be accessed using the \r
+ * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The \r
+ * xSemaphoreTake() and xSemaphoreGive() macros should not be used.\r
+ *\r
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex \r
+ * doesn't become available again until the owner has called \r
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example, \r
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will \r
+ * not be available to any other task until it has also 'given' the mutex back\r
+ * exactly five times.\r
+ * \r
+ * This type of semaphore uses a priority inheritance mechanism so a task \r
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the \r
+ * semaphore it is no longer required. \r
+ *\r
+ * Mutex type semaphores cannot be used from within interrupt service routines. \r
+ *\r
+ * See vSemaphoreCreateBinary() for an alternative implementation that can be \r
+ * used for pure synchronisation (where one task or interrupt always 'gives' the \r
+ * semaphore and another always 'takes' the semaphore) and from within interrupt \r
+ * service routines.\r
+ *\r
+ * @return xSemaphore Handle to the created mutex semaphore. Should be of type \r
+ * xSemaphoreHandle.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ xSemaphoreHandle xSemaphore;\r
+\r
+ void vATask( void * pvParameters )\r
+ {\r
+ // Semaphore cannot be used before a call to xSemaphoreCreateMutex().\r
+ // This is a macro so pass the variable in directly.\r
+ xSemaphore = xSemaphoreCreateRecursiveMutex();\r
+\r
+ if( xSemaphore != NULL )\r
+ {\r
+ // The semaphore was created successfully.\r
+ // The semaphore can now be used. \r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup vSemaphoreCreateMutex vSemaphoreCreateMutex\r
+ * \ingroup Semaphores\r
+ */\r
+#define xSemaphoreCreateRecursiveMutex() xQueueCreateMutex( queueQUEUE_TYPE_RECURSIVE_MUTEX )\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>xSemaphoreHandle xSemaphoreCreateCounting( unsigned portBASE_TYPE uxMaxCount, unsigned portBASE_TYPE uxInitialCount )</pre>\r
+ *\r
+ * <i>Macro</i> that creates a counting semaphore by using the existing \r
+ * queue mechanism. \r
+ *\r
+ * Counting semaphores are typically used for two things:\r
+ *\r
+ * 1) Counting events. \r
+ *\r
+ * In this usage scenario an event handler will 'give' a semaphore each time\r
+ * an event occurs (incrementing the semaphore count value), and a handler \r
+ * task will 'take' a semaphore each time it processes an event \r
+ * (decrementing the semaphore count value). The count value is therefore \r
+ * the difference between the number of events that have occurred and the \r
+ * number that have been processed. In this case it is desirable for the \r
+ * initial count value to be zero.\r
+ *\r
+ * 2) Resource management.\r
+ *\r
+ * In this usage scenario the count value indicates the number of resources\r
+ * available. To obtain control of a resource a task must first obtain a \r
+ * semaphore - decrementing the semaphore count value. When the count value\r
+ * reaches zero there are no free resources. When a task finishes with the\r
+ * resource it 'gives' the semaphore back - incrementing the semaphore count\r
+ * value. In this case it is desirable for the initial count value to be\r
+ * equal to the maximum count value, indicating that all resources are free.\r
+ *\r
+ * @param uxMaxCount The maximum count value that can be reached. When the \r
+ * semaphore reaches this value it can no longer be 'given'.\r
+ *\r
+ * @param uxInitialCount The count value assigned to the semaphore when it is\r
+ * created.\r
+ *\r
+ * @return Handle to the created semaphore. Null if the semaphore could not be\r
+ * created.\r
+ * \r
+ * Example usage:\r
+ <pre>\r
+ xSemaphoreHandle xSemaphore;\r
+\r
+ void vATask( void * pvParameters )\r
+ {\r
+ xSemaphoreHandle xSemaphore = NULL;\r
+\r
+ // Semaphore cannot be used before a call to xSemaphoreCreateCounting().\r
+ // The max value to which the semaphore can count should be 10, and the\r
+ // initial value assigned to the count should be 0.\r
+ xSemaphore = xSemaphoreCreateCounting( 10, 0 );\r
+\r
+ if( xSemaphore != NULL )\r
+ {\r
+ // The semaphore was created successfully.\r
+ // The semaphore can now be used. \r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xSemaphoreCreateCounting xSemaphoreCreateCounting\r
+ * \ingroup Semaphores\r
+ */\r
+#define xSemaphoreCreateCounting( uxMaxCount, uxInitialCount ) xQueueCreateCountingSemaphore( ( uxMaxCount ), ( uxInitialCount ) )\r
+\r
+/**\r
+ * semphr. h\r
+ * <pre>void vSemaphoreDelete( xSemaphoreHandle xSemaphore );</pre>\r
+ *\r
+ * Delete a semaphore. This function must be used with care. For example,\r
+ * do not delete a mutex type semaphore if the mutex is held by a task.\r
+ *\r
+ * @param xSemaphore A handle to the semaphore to be deleted.\r
+ *\r
+ * \page vSemaphoreDelete vSemaphoreDelete\r
+ * \ingroup Semaphores\r
+ */\r
+#define vSemaphoreDelete( xSemaphore ) vQueueDelete( ( xQueueHandle ) ( xSemaphore ) )\r
+\r
+/**\r
+ * semphr.h\r
+ * <pre>xTaskHandle xSemaphoreGetMutexHolder( xSemaphoreHandle xMutex );</pre>\r
+ *\r
+ * If xMutex is indeed a mutex type semaphore, return the current mutex holder.\r
+ * If xMutex is not a mutex type semaphore, or the mutex is available (not held\r
+ * by a task), return NULL.\r
+ *\r
+ * Note: This Is is a good way of determining if the calling task is the mutex \r
+ * holder, but not a good way of determining the identity of the mutex holder as\r
+ * the holder may change between the function exiting and the returned value\r
+ * being tested.\r
+ */\r
+#define xSemaphoreGetMutexHolder( xSemaphore ) xQueueGetMutexHolder( ( xSemaphore ) )\r
+\r
+#endif /* SEMAPHORE_H */\r
+\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - Selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+\r
+#ifndef TASK_H\r
+#define TASK_H\r
+\r
+#ifndef INC_FREERTOS_H\r
+ #error "include FreeRTOS.h must appear in source files before include task.h"\r
+#endif\r
+\r
+#include "portable.h"\r
+#include "list.h"\r
+\r
+#ifdef __cplusplus\r
+extern "C" {\r
+#endif\r
+\r
+/*-----------------------------------------------------------\r
+ * MACROS AND DEFINITIONS\r
+ *----------------------------------------------------------*/\r
+\r
+#define tskKERNEL_VERSION_NUMBER "V7.1.1"\r
+\r
+/**\r
+ * task. h\r
+ *\r
+ * Type by which tasks are referenced. For example, a call to xTaskCreate\r
+ * returns (via a pointer parameter) an xTaskHandle variable that can then\r
+ * be used as a parameter to vTaskDelete to delete the task.\r
+ *\r
+ * \page xTaskHandle xTaskHandle\r
+ * \ingroup Tasks\r
+ */\r
+typedef void * xTaskHandle;\r
+\r
+/*\r
+ * Used internally only.\r
+ */\r
+typedef struct xTIME_OUT\r
+{\r
+ portBASE_TYPE xOverflowCount;\r
+ portTickType xTimeOnEntering;\r
+} xTimeOutType;\r
+\r
+/*\r
+ * Defines the memory ranges allocated to the task when an MPU is used.\r
+ */\r
+typedef struct xMEMORY_REGION\r
+{\r
+ void *pvBaseAddress;\r
+ unsigned long ulLengthInBytes;\r
+ unsigned long ulParameters;\r
+} xMemoryRegion;\r
+\r
+/*\r
+ * Parameters required to create an MPU protected task.\r
+ */\r
+typedef struct xTASK_PARAMTERS\r
+{\r
+ pdTASK_CODE pvTaskCode;\r
+ const signed char * const pcName;\r
+ unsigned short usStackDepth;\r
+ void *pvParameters;\r
+ unsigned portBASE_TYPE uxPriority;\r
+ portSTACK_TYPE *puxStackBuffer;\r
+ xMemoryRegion xRegions[ portNUM_CONFIGURABLE_REGIONS ];\r
+} xTaskParameters;\r
+\r
+/*\r
+ * Defines the priority used by the idle task. This must not be modified.\r
+ *\r
+ * \ingroup TaskUtils\r
+ */\r
+#define tskIDLE_PRIORITY ( ( unsigned portBASE_TYPE ) 0U )\r
+\r
+/**\r
+ * task. h\r
+ *\r
+ * Macro for forcing a context switch.\r
+ *\r
+ * \page taskYIELD taskYIELD\r
+ * \ingroup SchedulerControl\r
+ */\r
+#define taskYIELD() portYIELD()\r
+\r
+/**\r
+ * task. h\r
+ *\r
+ * Macro to mark the start of a critical code region. Preemptive context\r
+ * switches cannot occur when in a critical region.\r
+ *\r
+ * NOTE: This may alter the stack (depending on the portable implementation)\r
+ * so must be used with care!\r
+ *\r
+ * \page taskENTER_CRITICAL taskENTER_CRITICAL\r
+ * \ingroup SchedulerControl\r
+ */\r
+#define taskENTER_CRITICAL() portENTER_CRITICAL()\r
+\r
+/**\r
+ * task. h\r
+ *\r
+ * Macro to mark the end of a critical code region. Preemptive context\r
+ * switches cannot occur when in a critical region.\r
+ *\r
+ * NOTE: This may alter the stack (depending on the portable implementation)\r
+ * so must be used with care!\r
+ *\r
+ * \page taskEXIT_CRITICAL taskEXIT_CRITICAL\r
+ * \ingroup SchedulerControl\r
+ */\r
+#define taskEXIT_CRITICAL() portEXIT_CRITICAL()\r
+\r
+/**\r
+ * task. h\r
+ *\r
+ * Macro to disable all maskable interrupts.\r
+ *\r
+ * \page taskDISABLE_INTERRUPTS taskDISABLE_INTERRUPTS\r
+ * \ingroup SchedulerControl\r
+ */\r
+#define taskDISABLE_INTERRUPTS() portDISABLE_INTERRUPTS()\r
+\r
+/**\r
+ * task. h\r
+ *\r
+ * Macro to enable microcontroller interrupts.\r
+ *\r
+ * \page taskENABLE_INTERRUPTS taskENABLE_INTERRUPTS\r
+ * \ingroup SchedulerControl\r
+ */\r
+#define taskENABLE_INTERRUPTS() portENABLE_INTERRUPTS()\r
+\r
+/* Definitions returned by xTaskGetSchedulerState(). */\r
+#define taskSCHEDULER_NOT_STARTED 0\r
+#define taskSCHEDULER_RUNNING 1\r
+#define taskSCHEDULER_SUSPENDED 2\r
+\r
+/*-----------------------------------------------------------\r
+ * TASK CREATION API\r
+ *----------------------------------------------------------*/\r
+\r
+/**\r
+ * task. h\r
+ *<pre>\r
+ portBASE_TYPE xTaskCreate(\r
+ pdTASK_CODE pvTaskCode,\r
+ const char * const pcName,\r
+ unsigned short usStackDepth,\r
+ void *pvParameters,\r
+ unsigned portBASE_TYPE uxPriority,\r
+ xTaskHandle *pvCreatedTask\r
+ );</pre>\r
+ *\r
+ * Create a new task and add it to the list of tasks that are ready to run.\r
+ *\r
+ * xTaskCreate() can only be used to create a task that has unrestricted\r
+ * access to the entire microcontroller memory map. Systems that include MPU\r
+ * support can alternatively create an MPU constrained task using\r
+ * xTaskCreateRestricted().\r
+ *\r
+ * @param pvTaskCode Pointer to the task entry function. Tasks\r
+ * must be implemented to never return (i.e. continuous loop).\r
+ *\r
+ * @param pcName A descriptive name for the task. This is mainly used to\r
+ * facilitate debugging. Max length defined by tskMAX_TASK_NAME_LEN - default\r
+ * is 16.\r
+ *\r
+ * @param usStackDepth The size of the task stack specified as the number of\r
+ * variables the stack can hold - not the number of bytes. For example, if\r
+ * the stack is 16 bits wide and usStackDepth is defined as 100, 200 bytes\r
+ * will be allocated for stack storage.\r
+ *\r
+ * @param pvParameters Pointer that will be used as the parameter for the task\r
+ * being created.\r
+ *\r
+ * @param uxPriority The priority at which the task should run. Systems that\r
+ * include MPU support can optionally create tasks in a privileged (system)\r
+ * mode by setting bit portPRIVILEGE_BIT of the priority parameter. For\r
+ * example, to create a privileged task at priority 2 the uxPriority parameter\r
+ * should be set to ( 2 | portPRIVILEGE_BIT ).\r
+ *\r
+ * @param pvCreatedTask Used to pass back a handle by which the created task\r
+ * can be referenced.\r
+ *\r
+ * @return pdPASS if the task was successfully created and added to a ready\r
+ * list, otherwise an error code defined in the file errors. h\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // Task to be created.\r
+ void vTaskCode( void * pvParameters )\r
+ {\r
+ for( ;; )\r
+ {\r
+ // Task code goes here.\r
+ }\r
+ }\r
+\r
+ // Function that creates a task.\r
+ void vOtherFunction( void )\r
+ {\r
+ static unsigned char ucParameterToPass;\r
+ xTaskHandle xHandle;\r
+\r
+ // Create the task, storing the handle. Note that the passed parameter ucParameterToPass\r
+ // must exist for the lifetime of the task, so in this case is declared static. If it was just an\r
+ // an automatic stack variable it might no longer exist, or at least have been corrupted, by the time\r
+ // the new task attempts to access it.\r
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, &ucParameterToPass, tskIDLE_PRIORITY, &xHandle );\r
+\r
+ // Use the handle to delete the task.\r
+ vTaskDelete( xHandle );\r
+ }\r
+ </pre>\r
+ * \defgroup xTaskCreate xTaskCreate\r
+ * \ingroup Tasks\r
+ */\r
+#define xTaskCreate( pvTaskCode, pcName, usStackDepth, pvParameters, uxPriority, pxCreatedTask ) xTaskGenericCreate( ( pvTaskCode ), ( pcName ), ( usStackDepth ), ( pvParameters ), ( uxPriority ), ( pxCreatedTask ), ( NULL ), ( NULL ) )\r
+\r
+/**\r
+ * task. h\r
+ *<pre>\r
+ portBASE_TYPE xTaskCreateRestricted( xTaskParameters *pxTaskDefinition, xTaskHandle *pxCreatedTask );</pre>\r
+ *\r
+ * xTaskCreateRestricted() should only be used in systems that include an MPU\r
+ * implementation.\r
+ *\r
+ * Create a new task and add it to the list of tasks that are ready to run.\r
+ * The function parameters define the memory regions and associated access\r
+ * permissions allocated to the task.\r
+ *\r
+ * @param pxTaskDefinition Pointer to a structure that contains a member\r
+ * for each of the normal xTaskCreate() parameters (see the xTaskCreate() API\r
+ * documentation) plus an optional stack buffer and the memory region\r
+ * definitions.\r
+ *\r
+ * @param pxCreatedTask Used to pass back a handle by which the created task\r
+ * can be referenced.\r
+ *\r
+ * @return pdPASS if the task was successfully created and added to a ready\r
+ * list, otherwise an error code defined in the file errors. h\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+// Create an xTaskParameters structure that defines the task to be created.\r
+static const xTaskParameters xCheckTaskParameters =\r
+{\r
+ vATask, // pvTaskCode - the function that implements the task.\r
+ "ATask", // pcName - just a text name for the task to assist debugging.\r
+ 100, // usStackDepth - the stack size DEFINED IN WORDS.\r
+ NULL, // pvParameters - passed into the task function as the function parameters.\r
+ ( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.\r
+ cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.\r
+\r
+ // xRegions - Allocate up to three separate memory regions for access by\r
+ // the task, with appropriate access permissions. Different processors have\r
+ // different memory alignment requirements - refer to the FreeRTOS documentation\r
+ // for full information.\r
+ { \r
+ // Base address Length Parameters\r
+ { cReadWriteArray, 32, portMPU_REGION_READ_WRITE },\r
+ { cReadOnlyArray, 32, portMPU_REGION_READ_ONLY },\r
+ { cPrivilegedOnlyAccessArray, 128, portMPU_REGION_PRIVILEGED_READ_WRITE }\r
+ }\r
+};\r
+\r
+int main( void )\r
+{\r
+xTaskHandle xHandle;\r
+\r
+ // Create a task from the const structure defined above. The task handle\r
+ // is requested (the second parameter is not NULL) but in this case just for\r
+ // demonstration purposes as its not actually used.\r
+ xTaskCreateRestricted( &xRegTest1Parameters, &xHandle );\r
+\r
+ // Start the scheduler.\r
+ vTaskStartScheduler();\r
+\r
+ // Will only get here if there was insufficient memory to create the idle\r
+ // task.\r
+ for( ;; );\r
+}\r
+ </pre>\r
+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted\r
+ * \ingroup Tasks\r
+ */\r
+#define xTaskCreateRestricted( x, pxCreatedTask ) xTaskGenericCreate( ((x)->pvTaskCode), ((x)->pcName), ((x)->usStackDepth), ((x)->pvParameters), ((x)->uxPriority), (pxCreatedTask), ((x)->puxStackBuffer), ((x)->xRegions) )\r
+\r
+/**\r
+ * task. h\r
+ *<pre>\r
+ void vTaskAllocateMPURegions( xTaskHandle xTask, const xMemoryRegion * const pxRegions );</pre>\r
+ *\r
+ * Memory regions are assigned to a restricted task when the task is created by\r
+ * a call to xTaskCreateRestricted(). These regions can be redefined using\r
+ * vTaskAllocateMPURegions().\r
+ *\r
+ * @param xTask The handle of the task being updated.\r
+ *\r
+ * @param xRegions A pointer to an xMemoryRegion structure that contains the\r
+ * new memory region definitions.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+// Define an array of xMemoryRegion structures that configures an MPU region\r
+// allowing read/write access for 1024 bytes starting at the beginning of the\r
+// ucOneKByte array. The other two of the maximum 3 definable regions are\r
+// unused so set to zero.\r
+static const xMemoryRegion xAltRegions[ portNUM_CONFIGURABLE_REGIONS ] =\r
+{ \r
+ // Base address Length Parameters\r
+ { ucOneKByte, 1024, portMPU_REGION_READ_WRITE },\r
+ { 0, 0, 0 },\r
+ { 0, 0, 0 }\r
+};\r
+\r
+void vATask( void *pvParameters )\r
+{\r
+ // This task was created such that it has access to certain regions of\r
+ // memory as defined by the MPU configuration. At some point it is\r
+ // desired that these MPU regions are replaced with that defined in the\r
+ // xAltRegions const struct above. Use a call to vTaskAllocateMPURegions()\r
+ // for this purpose. NULL is used as the task handle to indicate that this\r
+ // function should modify the MPU regions of the calling task.\r
+ vTaskAllocateMPURegions( NULL, xAltRegions );\r
+ \r
+ // Now the task can continue its function, but from this point on can only\r
+ // access its stack and the ucOneKByte array (unless any other statically\r
+ // defined or shared regions have been declared elsewhere).\r
+}\r
+ </pre>\r
+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted\r
+ * \ingroup Tasks\r
+ */\r
+void vTaskAllocateMPURegions( xTaskHandle xTask, const xMemoryRegion * const pxRegions ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskDelete( xTaskHandle pxTask );</pre>\r
+ *\r
+ * INCLUDE_vTaskDelete must be defined as 1 for this function to be available.\r
+ * See the configuration section for more information.\r
+ *\r
+ * Remove a task from the RTOS real time kernels management. The task being\r
+ * deleted will be removed from all ready, blocked, suspended and event lists.\r
+ *\r
+ * NOTE: The idle task is responsible for freeing the kernel allocated\r
+ * memory from tasks that have been deleted. It is therefore important that\r
+ * the idle task is not starved of microcontroller processing time if your\r
+ * application makes any calls to vTaskDelete (). Memory allocated by the\r
+ * task code is not automatically freed, and should be freed before the task\r
+ * is deleted.\r
+ *\r
+ * See the demo application file death.c for sample code that utilises\r
+ * vTaskDelete ().\r
+ *\r
+ * @param pxTask The handle of the task to be deleted. Passing NULL will\r
+ * cause the calling task to be deleted.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vOtherFunction( void )\r
+ {\r
+ xTaskHandle xHandle;\r
+\r
+ // Create the task, storing the handle.\r
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
+\r
+ // Use the handle to delete the task.\r
+ vTaskDelete( xHandle );\r
+ }\r
+ </pre>\r
+ * \defgroup vTaskDelete vTaskDelete\r
+ * \ingroup Tasks\r
+ */\r
+void vTaskDelete( xTaskHandle pxTaskToDelete ) PRIVILEGED_FUNCTION;\r
+\r
+/*-----------------------------------------------------------\r
+ * TASK CONTROL API\r
+ *----------------------------------------------------------*/\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskDelay( portTickType xTicksToDelay );</pre>\r
+ *\r
+ * Delay a task for a given number of ticks. The actual time that the\r
+ * task remains blocked depends on the tick rate. The constant\r
+ * portTICK_RATE_MS can be used to calculate real time from the tick\r
+ * rate - with the resolution of one tick period.\r
+ *\r
+ * INCLUDE_vTaskDelay must be defined as 1 for this function to be available.\r
+ * See the configuration section for more information.\r
+ *\r
+ *\r
+ * vTaskDelay() specifies a time at which the task wishes to unblock relative to\r
+ * the time at which vTaskDelay() is called. For example, specifying a block\r
+ * period of 100 ticks will cause the task to unblock 100 ticks after\r
+ * vTaskDelay() is called. vTaskDelay() does not therefore provide a good method\r
+ * of controlling the frequency of a cyclical task as the path taken through the\r
+ * code, as well as other task and interrupt activity, will effect the frequency\r
+ * at which vTaskDelay() gets called and therefore the time at which the task\r
+ * next executes. See vTaskDelayUntil() for an alternative API function designed\r
+ * to facilitate fixed frequency execution. It does this by specifying an\r
+ * absolute time (rather than a relative time) at which the calling task should\r
+ * unblock.\r
+ *\r
+ * @param xTicksToDelay The amount of time, in tick periods, that\r
+ * the calling task should block.\r
+ *\r
+ * Example usage:\r
+\r
+ void vTaskFunction( void * pvParameters )\r
+ {\r
+ void vTaskFunction( void * pvParameters )\r
+ {\r
+ // Block for 500ms.\r
+ const portTickType xDelay = 500 / portTICK_RATE_MS;\r
+\r
+ for( ;; )\r
+ {\r
+ // Simply toggle the LED every 500ms, blocking between each toggle.\r
+ vToggleLED();\r
+ vTaskDelay( xDelay );\r
+ }\r
+ }\r
+\r
+ * \defgroup vTaskDelay vTaskDelay\r
+ * \ingroup TaskCtrl\r
+ */\r
+void vTaskDelay( portTickType xTicksToDelay ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskDelayUntil( portTickType *pxPreviousWakeTime, portTickType xTimeIncrement );</pre>\r
+ *\r
+ * INCLUDE_vTaskDelayUntil must be defined as 1 for this function to be available.\r
+ * See the configuration section for more information.\r
+ *\r
+ * Delay a task until a specified time. This function can be used by cyclical\r
+ * tasks to ensure a constant execution frequency.\r
+ *\r
+ * This function differs from vTaskDelay () in one important aspect: vTaskDelay () will\r
+ * cause a task to block for the specified number of ticks from the time vTaskDelay () is\r
+ * called. It is therefore difficult to use vTaskDelay () by itself to generate a fixed\r
+ * execution frequency as the time between a task starting to execute and that task\r
+ * calling vTaskDelay () may not be fixed [the task may take a different path though the\r
+ * code between calls, or may get interrupted or preempted a different number of times\r
+ * each time it executes].\r
+ *\r
+ * Whereas vTaskDelay () specifies a wake time relative to the time at which the function\r
+ * is called, vTaskDelayUntil () specifies the absolute (exact) time at which it wishes to\r
+ * unblock.\r
+ *\r
+ * The constant portTICK_RATE_MS can be used to calculate real time from the tick\r
+ * rate - with the resolution of one tick period.\r
+ *\r
+ * @param pxPreviousWakeTime Pointer to a variable that holds the time at which the\r
+ * task was last unblocked. The variable must be initialised with the current time\r
+ * prior to its first use (see the example below). Following this the variable is\r
+ * automatically updated within vTaskDelayUntil ().\r
+ *\r
+ * @param xTimeIncrement The cycle time period. The task will be unblocked at\r
+ * time *pxPreviousWakeTime + xTimeIncrement. Calling vTaskDelayUntil with the\r
+ * same xTimeIncrement parameter value will cause the task to execute with\r
+ * a fixed interface period.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ // Perform an action every 10 ticks.\r
+ void vTaskFunction( void * pvParameters )\r
+ {\r
+ portTickType xLastWakeTime;\r
+ const portTickType xFrequency = 10;\r
+\r
+ // Initialise the xLastWakeTime variable with the current time.\r
+ xLastWakeTime = xTaskGetTickCount ();\r
+ for( ;; )\r
+ {\r
+ // Wait for the next cycle.\r
+ vTaskDelayUntil( &xLastWakeTime, xFrequency );\r
+\r
+ // Perform action here.\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup vTaskDelayUntil vTaskDelayUntil\r
+ * \ingroup TaskCtrl\r
+ */\r
+void vTaskDelayUntil( portTickType * const pxPreviousWakeTime, portTickType xTimeIncrement ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask );</pre>\r
+ *\r
+ * INCLUDE_xTaskPriorityGet must be defined as 1 for this function to be available.\r
+ * See the configuration section for more information.\r
+ *\r
+ * Obtain the priority of any task.\r
+ *\r
+ * @param pxTask Handle of the task to be queried. Passing a NULL\r
+ * handle results in the priority of the calling task being returned.\r
+ *\r
+ * @return The priority of pxTask.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vAFunction( void )\r
+ {\r
+ xTaskHandle xHandle;\r
+\r
+ // Create a task, storing the handle.\r
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
+\r
+ // ...\r
+\r
+ // Use the handle to obtain the priority of the created task.\r
+ // It was created with tskIDLE_PRIORITY, but may have changed\r
+ // it itself.\r
+ if( uxTaskPriorityGet( xHandle ) != tskIDLE_PRIORITY )\r
+ {\r
+ // The task has changed it's priority.\r
+ }\r
+\r
+ // ...\r
+\r
+ // Is our priority higher than the created task?\r
+ if( uxTaskPriorityGet( xHandle ) < uxTaskPriorityGet( NULL ) )\r
+ {\r
+ // Our priority (obtained using NULL handle) is higher.\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup uxTaskPriorityGet uxTaskPriorityGet\r
+ * \ingroup TaskCtrl\r
+ */\r
+unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority );</pre>\r
+ *\r
+ * INCLUDE_vTaskPrioritySet must be defined as 1 for this function to be available.\r
+ * See the configuration section for more information.\r
+ *\r
+ * Set the priority of any task.\r
+ *\r
+ * A context switch will occur before the function returns if the priority\r
+ * being set is higher than the currently executing task.\r
+ *\r
+ * @param pxTask Handle to the task for which the priority is being set.\r
+ * Passing a NULL handle results in the priority of the calling task being set.\r
+ *\r
+ * @param uxNewPriority The priority to which the task will be set.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vAFunction( void )\r
+ {\r
+ xTaskHandle xHandle;\r
+\r
+ // Create a task, storing the handle.\r
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
+\r
+ // ...\r
+\r
+ // Use the handle to raise the priority of the created task.\r
+ vTaskPrioritySet( xHandle, tskIDLE_PRIORITY + 1 );\r
+\r
+ // ...\r
+\r
+ // Use a NULL handle to raise our priority to the same value.\r
+ vTaskPrioritySet( NULL, tskIDLE_PRIORITY + 1 );\r
+ }\r
+ </pre>\r
+ * \defgroup vTaskPrioritySet vTaskPrioritySet\r
+ * \ingroup TaskCtrl\r
+ */\r
+void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskSuspend( xTaskHandle pxTaskToSuspend );</pre>\r
+ *\r
+ * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.\r
+ * See the configuration section for more information.\r
+ *\r
+ * Suspend any task. When suspended a task will never get any microcontroller\r
+ * processing time, no matter what its priority.\r
+ *\r
+ * Calls to vTaskSuspend are not accumulative -\r
+ * i.e. calling vTaskSuspend () twice on the same task still only requires one\r
+ * call to vTaskResume () to ready the suspended task.\r
+ *\r
+ * @param pxTaskToSuspend Handle to the task being suspended. Passing a NULL\r
+ * handle will cause the calling task to be suspended.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vAFunction( void )\r
+ {\r
+ xTaskHandle xHandle;\r
+\r
+ // Create a task, storing the handle.\r
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
+\r
+ // ...\r
+\r
+ // Use the handle to suspend the created task.\r
+ vTaskSuspend( xHandle );\r
+\r
+ // ...\r
+\r
+ // The created task will not run during this period, unless\r
+ // another task calls vTaskResume( xHandle ).\r
+\r
+ //...\r
+\r
+\r
+ // Suspend ourselves.\r
+ vTaskSuspend( NULL );\r
+\r
+ // We cannot get here unless another task calls vTaskResume\r
+ // with our handle as the parameter.\r
+ }\r
+ </pre>\r
+ * \defgroup vTaskSuspend vTaskSuspend\r
+ * \ingroup TaskCtrl\r
+ */\r
+void vTaskSuspend( xTaskHandle pxTaskToSuspend ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskResume( xTaskHandle pxTaskToResume );</pre>\r
+ *\r
+ * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.\r
+ * See the configuration section for more information.\r
+ *\r
+ * Resumes a suspended task.\r
+ *\r
+ * A task that has been suspended by one of more calls to vTaskSuspend ()\r
+ * will be made available for running again by a single call to\r
+ * vTaskResume ().\r
+ *\r
+ * @param pxTaskToResume Handle to the task being readied.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vAFunction( void )\r
+ {\r
+ xTaskHandle xHandle;\r
+\r
+ // Create a task, storing the handle.\r
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );\r
+\r
+ // ...\r
+\r
+ // Use the handle to suspend the created task.\r
+ vTaskSuspend( xHandle );\r
+\r
+ // ...\r
+\r
+ // The created task will not run during this period, unless\r
+ // another task calls vTaskResume( xHandle ).\r
+\r
+ //...\r
+\r
+\r
+ // Resume the suspended task ourselves.\r
+ vTaskResume( xHandle );\r
+\r
+ // The created task will once again get microcontroller processing\r
+ // time in accordance with it priority within the system.\r
+ }\r
+ </pre>\r
+ * \defgroup vTaskResume vTaskResume\r
+ * \ingroup TaskCtrl\r
+ */\r
+void vTaskResume( xTaskHandle pxTaskToResume ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void xTaskResumeFromISR( xTaskHandle pxTaskToResume );</pre>\r
+ *\r
+ * INCLUDE_xTaskResumeFromISR must be defined as 1 for this function to be\r
+ * available. See the configuration section for more information.\r
+ *\r
+ * An implementation of vTaskResume() that can be called from within an ISR.\r
+ *\r
+ * A task that has been suspended by one of more calls to vTaskSuspend ()\r
+ * will be made available for running again by a single call to\r
+ * xTaskResumeFromISR ().\r
+ *\r
+ * @param pxTaskToResume Handle to the task being readied.\r
+ *\r
+ * \defgroup vTaskResumeFromISR vTaskResumeFromISR\r
+ * \ingroup TaskCtrl\r
+ */\r
+portBASE_TYPE xTaskResumeFromISR( xTaskHandle pxTaskToResume ) PRIVILEGED_FUNCTION;\r
+\r
+/*-----------------------------------------------------------\r
+ * SCHEDULER CONTROL\r
+ *----------------------------------------------------------*/\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskStartScheduler( void );</pre>\r
+ *\r
+ * Starts the real time kernel tick processing. After calling the kernel\r
+ * has control over which tasks are executed and when. This function\r
+ * does not return until an executing task calls vTaskEndScheduler ().\r
+ *\r
+ * At least one task should be created via a call to xTaskCreate ()\r
+ * before calling vTaskStartScheduler (). The idle task is created\r
+ * automatically when the first application task is created.\r
+ *\r
+ * See the demo application file main.c for an example of creating\r
+ * tasks and starting the kernel.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vAFunction( void )\r
+ {\r
+ // Create at least one task before starting the kernel.\r
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );\r
+\r
+ // Start the real time kernel with preemption.\r
+ vTaskStartScheduler ();\r
+\r
+ // Will not get here unless a task calls vTaskEndScheduler ()\r
+ }\r
+ </pre>\r
+ *\r
+ * \defgroup vTaskStartScheduler vTaskStartScheduler\r
+ * \ingroup SchedulerControl\r
+ */\r
+void vTaskStartScheduler( void ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskEndScheduler( void );</pre>\r
+ *\r
+ * Stops the real time kernel tick. All created tasks will be automatically\r
+ * deleted and multitasking (either preemptive or cooperative) will\r
+ * stop. Execution then resumes from the point where vTaskStartScheduler ()\r
+ * was called, as if vTaskStartScheduler () had just returned.\r
+ *\r
+ * See the demo application file main. c in the demo/PC directory for an\r
+ * example that uses vTaskEndScheduler ().\r
+ *\r
+ * vTaskEndScheduler () requires an exit function to be defined within the\r
+ * portable layer (see vPortEndScheduler () in port. c for the PC port). This\r
+ * performs hardware specific operations such as stopping the kernel tick.\r
+ *\r
+ * vTaskEndScheduler () will cause all of the resources allocated by the\r
+ * kernel to be freed - but will not free resources allocated by application\r
+ * tasks.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vTaskCode( void * pvParameters )\r
+ {\r
+ for( ;; )\r
+ {\r
+ // Task code goes here.\r
+\r
+ // At some point we want to end the real time kernel processing\r
+ // so call ...\r
+ vTaskEndScheduler ();\r
+ }\r
+ }\r
+\r
+ void vAFunction( void )\r
+ {\r
+ // Create at least one task before starting the kernel.\r
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );\r
+\r
+ // Start the real time kernel with preemption.\r
+ vTaskStartScheduler ();\r
+\r
+ // Will only get here when the vTaskCode () task has called\r
+ // vTaskEndScheduler (). When we get here we are back to single task\r
+ // execution.\r
+ }\r
+ </pre>\r
+ *\r
+ * \defgroup vTaskEndScheduler vTaskEndScheduler\r
+ * \ingroup SchedulerControl\r
+ */\r
+void vTaskEndScheduler( void ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>void vTaskSuspendAll( void );</pre>\r
+ *\r
+ * Suspends all real time kernel activity while keeping interrupts (including the\r
+ * kernel tick) enabled.\r
+ *\r
+ * After calling vTaskSuspendAll () the calling task will continue to execute\r
+ * without risk of being swapped out until a call to xTaskResumeAll () has been\r
+ * made.\r
+ *\r
+ * API functions that have the potential to cause a context switch (for example,\r
+ * vTaskDelayUntil(), xQueueSend(), etc.) must not be called while the scheduler\r
+ * is suspended.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vTask1( void * pvParameters )\r
+ {\r
+ for( ;; )\r
+ {\r
+ // Task code goes here.\r
+\r
+ // ...\r
+\r
+ // At some point the task wants to perform a long operation during\r
+ // which it does not want to get swapped out. It cannot use\r
+ // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the\r
+ // operation may cause interrupts to be missed - including the\r
+ // ticks.\r
+\r
+ // Prevent the real time kernel swapping out the task.\r
+ vTaskSuspendAll ();\r
+\r
+ // Perform the operation here. There is no need to use critical\r
+ // sections as we have all the microcontroller processing time.\r
+ // During this time interrupts will still operate and the kernel\r
+ // tick count will be maintained.\r
+\r
+ // ...\r
+\r
+ // The operation is complete. Restart the kernel.\r
+ xTaskResumeAll ();\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup vTaskSuspendAll vTaskSuspendAll\r
+ * \ingroup SchedulerControl\r
+ */\r
+void vTaskSuspendAll( void ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>char xTaskResumeAll( void );</pre>\r
+ *\r
+ * Resumes real time kernel activity following a call to vTaskSuspendAll ().\r
+ * After a call to vTaskSuspendAll () the kernel will take control of which\r
+ * task is executing at any time.\r
+ *\r
+ * @return If resuming the scheduler caused a context switch then pdTRUE is\r
+ * returned, otherwise pdFALSE is returned.\r
+ *\r
+ * Example usage:\r
+ <pre>\r
+ void vTask1( void * pvParameters )\r
+ {\r
+ for( ;; )\r
+ {\r
+ // Task code goes here.\r
+\r
+ // ...\r
+\r
+ // At some point the task wants to perform a long operation during\r
+ // which it does not want to get swapped out. It cannot use\r
+ // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the\r
+ // operation may cause interrupts to be missed - including the\r
+ // ticks.\r
+\r
+ // Prevent the real time kernel swapping out the task.\r
+ vTaskSuspendAll ();\r
+\r
+ // Perform the operation here. There is no need to use critical\r
+ // sections as we have all the microcontroller processing time.\r
+ // During this time interrupts will still operate and the real\r
+ // time kernel tick count will be maintained.\r
+\r
+ // ...\r
+\r
+ // The operation is complete. Restart the kernel. We want to force\r
+ // a context switch - but there is no point if resuming the scheduler\r
+ // caused a context switch already.\r
+ if( !xTaskResumeAll () )\r
+ {\r
+ taskYIELD ();\r
+ }\r
+ }\r
+ }\r
+ </pre>\r
+ * \defgroup xTaskResumeAll xTaskResumeAll\r
+ * \ingroup SchedulerControl\r
+ */\r
+signed portBASE_TYPE xTaskResumeAll( void ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <pre>signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask );</pre>\r
+ *\r
+ * Utility task that simply returns pdTRUE if the task referenced by xTask is\r
+ * currently in the Suspended state, or pdFALSE if the task referenced by xTask\r
+ * is in any other state.\r
+ *\r
+ */\r
+signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask ) PRIVILEGED_FUNCTION;\r
+\r
+/*-----------------------------------------------------------\r
+ * TASK UTILITIES\r
+ *----------------------------------------------------------*/\r
+\r
+/**\r
+ * task. h\r
+ * <PRE>portTickType xTaskGetTickCount( void );</PRE>\r
+ *\r
+ * @return The count of ticks since vTaskStartScheduler was called.\r
+ *\r
+ * \page xTaskGetTickCount xTaskGetTickCount\r
+ * \ingroup TaskUtils\r
+ */\r
+portTickType xTaskGetTickCount( void ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <PRE>portTickType xTaskGetTickCountFromISR( void );</PRE>\r
+ *\r
+ * @return The count of ticks since vTaskStartScheduler was called.\r
+ *\r
+ * This is a version of xTaskGetTickCount() that is safe to be called from an\r
+ * ISR - provided that portTickType is the natural word size of the\r
+ * microcontroller being used or interrupt nesting is either not supported or\r
+ * not being used.\r
+ *\r
+ * \page xTaskGetTickCount xTaskGetTickCount\r
+ * \ingroup TaskUtils\r
+ */\r
+portTickType xTaskGetTickCountFromISR( void ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <PRE>unsigned short uxTaskGetNumberOfTasks( void );</PRE>\r
+ *\r
+ * @return The number of tasks that the real time kernel is currently managing.\r
+ * This includes all ready, blocked and suspended tasks. A task that\r
+ * has been deleted but not yet freed by the idle task will also be\r
+ * included in the count.\r
+ *\r
+ * \page uxTaskGetNumberOfTasks uxTaskGetNumberOfTasks\r
+ * \ingroup TaskUtils\r
+ */\r
+unsigned portBASE_TYPE uxTaskGetNumberOfTasks( void ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <PRE>signed char *pcTaskGetTaskName( xTaskHandle xTaskToQuery );</PRE>\r
+ *\r
+ * @return The text (human readable) name of the task referenced by the handle\r
+ * xTaskToQueury. A task can query its own name by either passing in its own\r
+ * handle, or by setting xTaskToQuery to NULL. INCLUDE_pcTaskGetTaskName must be\r
+ * set to 1 in FreeRTOSConfig.h for pcTaskGetTaskName() to be available.\r
+ *\r
+ * \page pcTaskGetTaskName pcTaskGetTaskName\r
+ * \ingroup TaskUtils\r
+ */\r
+signed char *pcTaskGetTaskName( xTaskHandle xTaskToQuery );\r
+\r
+/**\r
+ * task. h\r
+ * <PRE>void vTaskList( char *pcWriteBuffer );</PRE>\r
+ *\r
+ * configUSE_TRACE_FACILITY must be defined as 1 for this function to be\r
+ * available. See the configuration section for more information.\r
+ *\r
+ * NOTE: This function will disable interrupts for its duration. It is\r
+ * not intended for normal application runtime use but as a debug aid.\r
+ *\r
+ * Lists all the current tasks, along with their current state and stack\r
+ * usage high water mark.\r
+ *\r
+ * Tasks are reported as blocked ('B'), ready ('R'), deleted ('D') or\r
+ * suspended ('S').\r
+ *\r
+ * @param pcWriteBuffer A buffer into which the above mentioned details\r
+ * will be written, in ascii form. This buffer is assumed to be large\r
+ * enough to contain the generated report. Approximately 40 bytes per\r
+ * task should be sufficient.\r
+ *\r
+ * \page vTaskList vTaskList\r
+ * \ingroup TaskUtils\r
+ */\r
+void vTaskList( signed char *pcWriteBuffer ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <PRE>void vTaskGetRunTimeStats( char *pcWriteBuffer );</PRE>\r
+ *\r
+ * configGENERATE_RUN_TIME_STATS must be defined as 1 for this function\r
+ * to be available. The application must also then provide definitions\r
+ * for portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() and\r
+ * portGET_RUN_TIME_COUNTER_VALUE to configure a peripheral timer/counter\r
+ * and return the timers current count value respectively. The counter\r
+ * should be at least 10 times the frequency of the tick count.\r
+ *\r
+ * NOTE: This function will disable interrupts for its duration. It is\r
+ * not intended for normal application runtime use but as a debug aid.\r
+ *\r
+ * Setting configGENERATE_RUN_TIME_STATS to 1 will result in a total\r
+ * accumulated execution time being stored for each task. The resolution\r
+ * of the accumulated time value depends on the frequency of the timer\r
+ * configured by the portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() macro.\r
+ * Calling vTaskGetRunTimeStats() writes the total execution time of each\r
+ * task into a buffer, both as an absolute count value and as a percentage\r
+ * of the total system execution time.\r
+ *\r
+ * @param pcWriteBuffer A buffer into which the execution times will be\r
+ * written, in ascii form. This buffer is assumed to be large enough to\r
+ * contain the generated report. Approximately 40 bytes per task should\r
+ * be sufficient.\r
+ *\r
+ * \page vTaskGetRunTimeStats vTaskGetRunTimeStats\r
+ * \ingroup TaskUtils\r
+ */\r
+void vTaskGetRunTimeStats( signed char *pcWriteBuffer ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <PRE>void vTaskStartTrace( char * pcBuffer, unsigned portBASE_TYPE uxBufferSize );</PRE>\r
+ *\r
+ * Starts a real time kernel activity trace. The trace logs the identity of\r
+ * which task is running when.\r
+ *\r
+ * The trace file is stored in binary format. A separate DOS utility called\r
+ * convtrce.exe is used to convert this into a tab delimited text file which\r
+ * can be viewed and plotted in a spread sheet.\r
+ *\r
+ * @param pcBuffer The buffer into which the trace will be written.\r
+ *\r
+ * @param ulBufferSize The size of pcBuffer in bytes. The trace will continue\r
+ * until either the buffer in full, or ulTaskEndTrace () is called.\r
+ *\r
+ * \page vTaskStartTrace vTaskStartTrace\r
+ * \ingroup TaskUtils\r
+ */\r
+void vTaskStartTrace( signed char * pcBuffer, unsigned long ulBufferSize ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task. h\r
+ * <PRE>unsigned long ulTaskEndTrace( void );</PRE>\r
+ *\r
+ * Stops a kernel activity trace. See vTaskStartTrace ().\r
+ *\r
+ * @return The number of bytes that have been written into the trace buffer.\r
+ *\r
+ * \page usTaskEndTrace usTaskEndTrace\r
+ * \ingroup TaskUtils\r
+ */\r
+unsigned long ulTaskEndTrace( void ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * task.h\r
+ * <PRE>unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask );</PRE>\r
+ *\r
+ * INCLUDE_uxTaskGetStackHighWaterMark must be set to 1 in FreeRTOSConfig.h for\r
+ * this function to be available.\r
+ *\r
+ * Returns the high water mark of the stack associated with xTask. That is,\r
+ * the minimum free stack space there has been (in words, so on a 32 bit machine\r
+ * a value of 1 means 4 bytes) since the task started. The smaller the returned\r
+ * number the closer the task has come to overflowing its stack.\r
+ *\r
+ * @param xTask Handle of the task associated with the stack to be checked.\r
+ * Set xTask to NULL to check the stack of the calling task.\r
+ *\r
+ * @return The smallest amount of free stack space there has been (in bytes)\r
+ * since the task referenced by xTask was created.\r
+ */\r
+unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask ) PRIVILEGED_FUNCTION;\r
+\r
+/* When using trace macros it is sometimes necessary to include tasks.h before\r
+FreeRTOS.h. When this is done pdTASK_HOOK_CODE will not yet have been defined,\r
+so the following two prototypes will cause a compilation error. This can be\r
+fixed by simply guarding against the inclusion of these two prototypes unless\r
+they are explicitly required by the configUSE_APPLICATION_TASK_TAG configuration\r
+constant. */\r
+#ifdef configUSE_APPLICATION_TASK_TAG\r
+ #if configUSE_APPLICATION_TASK_TAG == 1\r
+ /**\r
+ * task.h\r
+ * <pre>void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction );</pre>\r
+ *\r
+ * Sets pxHookFunction to be the task hook function used by the task xTask.\r
+ * Passing xTask as NULL has the effect of setting the calling tasks hook\r
+ * function.\r
+ */\r
+ void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction ) PRIVILEGED_FUNCTION;\r
+\r
+ /**\r
+ * task.h\r
+ * <pre>void xTaskGetApplicationTaskTag( xTaskHandle xTask );</pre>\r
+ *\r
+ * Returns the pxHookFunction value assigned to the task xTask.\r
+ */\r
+ pdTASK_HOOK_CODE xTaskGetApplicationTaskTag( xTaskHandle xTask ) PRIVILEGED_FUNCTION;\r
+ #endif /* configUSE_APPLICATION_TASK_TAG ==1 */\r
+#endif /* ifdef configUSE_APPLICATION_TASK_TAG */\r
+\r
+/**\r
+ * task.h\r
+ * <pre>portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction );</pre>\r
+ *\r
+ * Calls the hook function associated with xTask. Passing xTask as NULL has\r
+ * the effect of calling the Running tasks (the calling task) hook function.\r
+ *\r
+ * pvParameter is passed to the hook function for the task to interpret as it\r
+ * wants.\r
+ */\r
+portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, void *pvParameter ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * xTaskGetIdleTaskHandle() is only available if \r
+ * INCLUDE_xTaskGetIdleTaskHandle is set to 1 in FreeRTOSConfig.h.\r
+ *\r
+ * Simply returns the handle of the idle task. It is not valid to call\r
+ * xTaskGetIdleTaskHandle() before the scheduler has been started.\r
+ */\r
+xTaskHandle xTaskGetIdleTaskHandle( void );\r
+\r
+/*-----------------------------------------------------------\r
+ * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES\r
+ *----------------------------------------------------------*/\r
+\r
+/*\r
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS ONLY\r
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS\r
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
+ *\r
+ * Called from the real time kernel tick (either preemptive or cooperative),\r
+ * this increments the tick count and checks if any tasks that are blocked\r
+ * for a finite period required removing from a blocked list and placing on\r
+ * a ready list.\r
+ */\r
+void vTaskIncrementTick( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN\r
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
+ *\r
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.\r
+ *\r
+ * Removes the calling task from the ready list and places it both\r
+ * on the list of tasks waiting for a particular event, and the\r
+ * list of delayed tasks. The task will be removed from both lists\r
+ * and replaced on the ready list should either the event occur (and\r
+ * there be no higher priority tasks waiting on the same event) or\r
+ * the delay period expires.\r
+ *\r
+ * @param pxEventList The list containing tasks that are blocked waiting\r
+ * for the event to occur.\r
+ *\r
+ * @param xTicksToWait The maximum amount of time that the task should wait\r
+ * for the event to occur. This is specified in kernel ticks,the constant\r
+ * portTICK_RATE_MS can be used to convert kernel ticks into a real time\r
+ * period.\r
+ */\r
+void vTaskPlaceOnEventList( const xList * const pxEventList, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN\r
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
+ *\r
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.\r
+ *\r
+ * This function performs nearly the same function as vTaskPlaceOnEventList().\r
+ * The difference being that this function does not permit tasks to block\r
+ * indefinitely, whereas vTaskPlaceOnEventList() does.\r
+ *\r
+ * @return pdTRUE if the task being removed has a higher priority than the task\r
+ * making the call, otherwise pdFALSE.\r
+ */\r
+void vTaskPlaceOnEventListRestricted( const xList * const pxEventList, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN\r
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
+ *\r
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.\r
+ *\r
+ * Removes a task from both the specified event list and the list of blocked\r
+ * tasks, and places it on a ready queue.\r
+ *\r
+ * xTaskRemoveFromEventList () will be called if either an event occurs to\r
+ * unblock a task, or the block timeout period expires.\r
+ *\r
+ * @return pdTRUE if the task being removed has a higher priority than the task\r
+ * making the call, otherwise pdFALSE.\r
+ */\r
+signed portBASE_TYPE xTaskRemoveFromEventList( const xList * const pxEventList ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS ONLY\r
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS\r
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.\r
+ *\r
+ * Sets the pointer to the current TCB to the TCB of the highest priority task\r
+ * that is ready to run.\r
+ */\r
+void vTaskSwitchContext( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Return the handle of the calling task.\r
+ */\r
+xTaskHandle xTaskGetCurrentTaskHandle( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Capture the current time status for future reference.\r
+ */\r
+void vTaskSetTimeOutState( xTimeOutType * const pxTimeOut ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Compare the time status now with that previously captured to see if the\r
+ * timeout has expired.\r
+ */\r
+portBASE_TYPE xTaskCheckForTimeOut( xTimeOutType * const pxTimeOut, portTickType * const pxTicksToWait ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Shortcut used by the queue implementation to prevent unnecessary call to\r
+ * taskYIELD();\r
+ */\r
+void vTaskMissedYield( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Returns the scheduler state as taskSCHEDULER_RUNNING,\r
+ * taskSCHEDULER_NOT_STARTED or taskSCHEDULER_SUSPENDED.\r
+ */\r
+portBASE_TYPE xTaskGetSchedulerState( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Raises the priority of the mutex holder to that of the calling task should\r
+ * the mutex holder have a priority less than the calling task.\r
+ */\r
+void vTaskPriorityInherit( xTaskHandle * const pxMutexHolder ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Set the priority of a task back to its proper priority in the case that it\r
+ * inherited a higher priority while it was holding a semaphore.\r
+ */\r
+void vTaskPriorityDisinherit( xTaskHandle * const pxMutexHolder ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Generic version of the task creation function which is in turn called by the\r
+ * xTaskCreate() and xTaskCreateRestricted() macros.\r
+ */\r
+signed portBASE_TYPE xTaskGenericCreate( pdTASK_CODE pxTaskCode, const signed char * const pcName, unsigned short usStackDepth, void *pvParameters, unsigned portBASE_TYPE uxPriority, xTaskHandle *pxCreatedTask, portSTACK_TYPE *puxStackBuffer, const xMemoryRegion * const xRegions ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Get the uxTCBNumber assigned to the task referenced by the xTask parameter.\r
+ */\r
+unsigned portBASE_TYPE uxTaskGetTaskNumber( xTaskHandle xTask );\r
+\r
+/* \r
+ * Set the uxTCBNumber of the task referenced by the xTask parameter to\r
+ * ucHandle.\r
+ */\r
+void vTaskSetTaskNumber( xTaskHandle xTask, unsigned portBASE_TYPE uxHandle );\r
+\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+#endif /* TASK_H */\r
+\r
+\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+\r
+#ifndef TIMERS_H\r
+#define TIMERS_H\r
+\r
+#ifndef INC_FREERTOS_H\r
+ #error "include FreeRTOS.h must appear in source files before include timers.h"\r
+#endif\r
+\r
+#include "portable.h"\r
+#include "list.h"\r
+#include "task.h"\r
+\r
+#ifdef __cplusplus\r
+extern "C" {\r
+#endif\r
+\r
+/* IDs for commands that can be sent/received on the timer queue. These are to\r
+be used solely through the macros that make up the public software timer API,\r
+as defined below. */\r
+#define tmrCOMMAND_START 0\r
+#define tmrCOMMAND_STOP 1\r
+#define tmrCOMMAND_CHANGE_PERIOD 2\r
+#define tmrCOMMAND_DELETE 3\r
+\r
+/*-----------------------------------------------------------\r
+ * MACROS AND DEFINITIONS\r
+ *----------------------------------------------------------*/\r
+\r
+ /**\r
+ * Type by which software timers are referenced. For example, a call to\r
+ * xTimerCreate() returns an xTimerHandle variable that can then be used to\r
+ * reference the subject timer in calls to other software timer API functions\r
+ * (for example, xTimerStart(), xTimerReset(), etc.).\r
+ */\r
+typedef void * xTimerHandle;\r
+\r
+/* Define the prototype to which timer callback functions must conform. */\r
+typedef void (*tmrTIMER_CALLBACK)( xTimerHandle xTimer );\r
+\r
+/**\r
+ * xTimerHandle xTimerCreate( const signed char *pcTimerName,\r
+ * portTickType xTimerPeriodInTicks,\r
+ * unsigned portBASE_TYPE uxAutoReload,\r
+ * void * pvTimerID,\r
+ * tmrTIMER_CALLBACK pxCallbackFunction );\r
+ *\r
+ * Creates a new software timer instance. This allocates the storage required\r
+ * by the new timer, initialises the new timers internal state, and returns a\r
+ * handle by which the new timer can be referenced.\r
+ *\r
+ * Timers are created in the dormant state. The xTimerStart(), xTimerReset(),\r
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and\r
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a timer into the\r
+ * active state.\r
+ *\r
+ * @param pcTimerName A text name that is assigned to the timer. This is done\r
+ * purely to assist debugging. The kernel itself only ever references a timer by\r
+ * its handle, and never by its name.\r
+ *\r
+ * @param xTimerPeriodInTicks The timer period. The time is defined in tick periods so\r
+ * the constant portTICK_RATE_MS can be used to convert a time that has been\r
+ * specified in milliseconds. For example, if the timer must expire after 100\r
+ * ticks, then xTimerPeriodInTicks should be set to 100. Alternatively, if the timer\r
+ * must expire after 500ms, then xPeriod can be set to ( 500 / portTICK_RATE_MS )\r
+ * provided configTICK_RATE_HZ is less than or equal to 1000.\r
+ *\r
+ * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will\r
+ * expire repeatedly with a frequency set by the xTimerPeriodInTicks parameter. If\r
+ * uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and\r
+ * enter the dormant state after it expires.\r
+ *\r
+ * @param pvTimerID An identifier that is assigned to the timer being created.\r
+ * Typically this would be used in the timer callback function to identify which\r
+ * timer expired when the same callback function is assigned to more than one\r
+ * timer.\r
+ *\r
+ * @param pxCallbackFunction The function to call when the timer expires.\r
+ * Callback functions must have the prototype defined by tmrTIMER_CALLBACK,\r
+ * which is "void vCallbackFunction( xTimerHandle xTimer );".\r
+ *\r
+ * @return If the timer is successfully create then a handle to the newly\r
+ * created timer is returned. If the timer cannot be created (because either\r
+ * there is insufficient FreeRTOS heap remaining to allocate the timer\r
+ * structures, or the timer period was set to 0) then 0 is returned.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * #define NUM_TIMERS 5\r
+ *\r
+ * // An array to hold handles to the created timers.\r
+ * xTimerHandle xTimers[ NUM_TIMERS ];\r
+ *\r
+ * // An array to hold a count of the number of times each timer expires.\r
+ * long lExpireCounters[ NUM_TIMERS ] = { 0 };\r
+ *\r
+ * // Define a callback function that will be used by multiple timer instances.\r
+ * // The callback function does nothing but count the number of times the\r
+ * // associated timer expires, and stop the timer once the timer has expired\r
+ * // 10 times.\r
+ * void vTimerCallback( xTimerHandle pxTimer )\r
+ * {\r
+ * long lArrayIndex;\r
+ * const long xMaxExpiryCountBeforeStopping = 10;\r
+ *\r
+ * // Optionally do something if the pxTimer parameter is NULL.\r
+ * configASSERT( pxTimer );\r
+ * \r
+ * // Which timer expired?\r
+ * lArrayIndex = ( long ) pvTimerGetTimerID( pxTimer );\r
+ *\r
+ * // Increment the number of times that pxTimer has expired.\r
+ * lExpireCounters[ lArrayIndex ] += 1;\r
+ *\r
+ * // If the timer has expired 10 times then stop it from running.\r
+ * if( lExpireCounters[ lArrayIndex ] == xMaxExpiryCountBeforeStopping )\r
+ * {\r
+ * // Do not use a block time if calling a timer API function from a\r
+ * // timer callback function, as doing so could cause a deadlock!\r
+ * xTimerStop( pxTimer, 0 );\r
+ * }\r
+ * }\r
+ *\r
+ * void main( void )\r
+ * {\r
+ * long x;\r
+ *\r
+ * // Create then start some timers. Starting the timers before the scheduler\r
+ * // has been started means the timers will start running immediately that\r
+ * // the scheduler starts.\r
+ * for( x = 0; x < NUM_TIMERS; x++ )\r
+ * {\r
+ * xTimers[ x ] = xTimerCreate( "Timer", // Just a text name, not used by the kernel.\r
+ * ( 100 * x ), // The timer period in ticks.\r
+ * pdTRUE, // The timers will auto-reload themselves when they expire.\r
+ * ( void * ) x, // Assign each timer a unique id equal to its array index.\r
+ * vTimerCallback // Each timer calls the same callback when it expires.\r
+ * );\r
+ *\r
+ * if( xTimers[ x ] == NULL )\r
+ * {\r
+ * // The timer was not created.\r
+ * }\r
+ * else\r
+ * {\r
+ * // Start the timer. No block time is specified, and even if one was\r
+ * // it would be ignored because the scheduler has not yet been\r
+ * // started.\r
+ * if( xTimerStart( xTimers[ x ], 0 ) != pdPASS )\r
+ * {\r
+ * // The timer could not be set into the Active state.\r
+ * }\r
+ * }\r
+ * }\r
+ *\r
+ * // ...\r
+ * // Create tasks here.\r
+ * // ...\r
+ *\r
+ * // Starting the scheduler will start the timers running as they have already\r
+ * // been set into the active state.\r
+ * xTaskStartScheduler();\r
+ *\r
+ * // Should not reach here.\r
+ * for( ;; );\r
+ * }\r
+ */\r
+xTimerHandle xTimerCreate( const signed char *pcTimerName, portTickType xTimerPeriodInTicks, unsigned portBASE_TYPE uxAutoReload, void * pvTimerID, tmrTIMER_CALLBACK pxCallbackFunction ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * void *pvTimerGetTimerID( xTimerHandle xTimer );\r
+ *\r
+ * Returns the ID assigned to the timer.\r
+ *\r
+ * IDs are assigned to timers using the pvTimerID parameter of the call to\r
+ * xTimerCreated() that was used to create the timer.\r
+ *\r
+ * If the same callback function is assigned to multiple timers then the timer\r
+ * ID can be used within the callback function to identify which timer actually\r
+ * expired.\r
+ *\r
+ * @param xTimer The timer being queried.\r
+ *\r
+ * @return The ID assigned to the timer being queried.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * See the xTimerCreate() API function example usage scenario.\r
+ */\r
+void *pvTimerGetTimerID( xTimerHandle xTimer ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * portBASE_TYPE xTimerIsTimerActive( xTimerHandle xTimer );\r
+ *\r
+ * Queries a timer to see if it is active or dormant.\r
+ *\r
+ * A timer will be dormant if:\r
+ * 1) It has been created but not started, or\r
+ * 2) It is an expired on-shot timer that has not been restarted.\r
+ *\r
+ * Timers are created in the dormant state. The xTimerStart(), xTimerReset(),\r
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and\r
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a timer into the\r
+ * active state.\r
+ *\r
+ * @param xTimer The timer being queried.\r
+ *\r
+ * @return pdFALSE will be returned if the timer is dormant. A value other than\r
+ * pdFALSE will be returned if the timer is active.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * // This function assumes xTimer has already been created.\r
+ * void vAFunction( xTimerHandle xTimer )\r
+ * {\r
+ * if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"\r
+ * {\r
+ * // xTimer is active, do something.\r
+ * }\r
+ * else\r
+ * {\r
+ * // xTimer is not active, do something else.\r
+ * }\r
+ * }\r
+ */\r
+portBASE_TYPE xTimerIsTimerActive( xTimerHandle xTimer ) PRIVILEGED_FUNCTION;\r
+\r
+/**\r
+ * xTimerGetTimerDaemonTaskHandle() is only available if \r
+ * INCLUDE_xTimerGetTimerDaemonTaskHandle is set to 1 in FreeRTOSConfig.h.\r
+ *\r
+ * Simply returns the handle of the timer service/daemon task. It it not valid\r
+ * to call xTimerGetTimerDaemonTaskHandle() before the scheduler has been started.\r
+ */\r
+xTaskHandle xTimerGetTimerDaemonTaskHandle( void );\r
+\r
+/**\r
+ * portBASE_TYPE xTimerStart( xTimerHandle xTimer, portTickType xBlockTime );\r
+ *\r
+ * Timer functionality is provided by a timer service/daemon task. Many of the\r
+ * public FreeRTOS timer API functions send commands to the timer service task\r
+ * though a queue called the timer command queue. The timer command queue is\r
+ * private to the kernel itself and is not directly accessible to application\r
+ * code. The length of the timer command queue is set by the\r
+ * configTIMER_QUEUE_LENGTH configuration constant.\r
+ *\r
+ * xTimerStart() starts a timer that was previously created using the\r
+ * xTimerCreate() API function. If the timer had already been started and was\r
+ * already in the active state, then xTimerStart() has equivalent functionality\r
+ * to the xTimerReset() API function.\r
+ *\r
+ * Starting a timer ensures the timer is in the active state. If the timer\r
+ * is not stopped, deleted, or reset in the mean time, the callback function\r
+ * associated with the timer will get called 'n' ticks after xTimerStart() was\r
+ * called, where 'n' is the timers defined period.\r
+ *\r
+ * It is valid to call xTimerStart() before the scheduler has been started, but\r
+ * when this is done the timer will not actually start until the scheduler is\r
+ * started, and the timers expiry time will be relative to when the scheduler is\r
+ * started, not relative to when xTimerStart() was called.\r
+ *\r
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStart()\r
+ * to be available.\r
+ *\r
+ * @param xTimer The handle of the timer being started/restarted.\r
+ *\r
+ * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
+ * be held in the Blocked state to wait for the start command to be successfully\r
+ * sent to the timer command queue, should the queue already be full when\r
+ * xTimerStart() was called. xBlockTime is ignored if xTimerStart() is called\r
+ * before the scheduler is started.\r
+ *\r
+ * @return pdFAIL will be returned if the start command could not be sent to\r
+ * the timer command queue even after xBlockTime ticks had passed. pdPASS will\r
+ * be returned if the command was successfully sent to the timer command queue.\r
+ * When the command is actually processed will depend on the priority of the\r
+ * timer service/daemon task relative to other tasks in the system, although the\r
+ * timers expiry time is relative to when xTimerStart() is actually called. The\r
+ * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY\r
+ * configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * See the xTimerCreate() API function example usage scenario.\r
+ *\r
+ */\r
+#define xTimerStart( xTimer, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCount() ), NULL, ( xBlockTime ) )\r
+\r
+/**\r
+ * portBASE_TYPE xTimerStop( xTimerHandle xTimer, portTickType xBlockTime );\r
+ *\r
+ * Timer functionality is provided by a timer service/daemon task. Many of the\r
+ * public FreeRTOS timer API functions send commands to the timer service task\r
+ * though a queue called the timer command queue. The timer command queue is\r
+ * private to the kernel itself and is not directly accessible to application\r
+ * code. The length of the timer command queue is set by the\r
+ * configTIMER_QUEUE_LENGTH configuration constant.\r
+ *\r
+ * xTimerStop() stops a timer that was previously started using either of the\r
+ * The xTimerStart(), xTimerReset(), xTimerStartFromISR(), xTimerResetFromISR(),\r
+ * xTimerChangePeriod() or xTimerChangePeriodFromISR() API functions.\r
+ *\r
+ * Stopping a timer ensures the timer is not in the active state.\r
+ *\r
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStop()\r
+ * to be available.\r
+ *\r
+ * @param xTimer The handle of the timer being stopped.\r
+ *\r
+ * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
+ * be held in the Blocked state to wait for the stop command to be successfully\r
+ * sent to the timer command queue, should the queue already be full when\r
+ * xTimerStop() was called. xBlockTime is ignored if xTimerStop() is called\r
+ * before the scheduler is started.\r
+ *\r
+ * @return pdFAIL will be returned if the stop command could not be sent to\r
+ * the timer command queue even after xBlockTime ticks had passed. pdPASS will\r
+ * be returned if the command was successfully sent to the timer command queue.\r
+ * When the command is actually processed will depend on the priority of the\r
+ * timer service/daemon task relative to other tasks in the system. The timer\r
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY\r
+ * configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * See the xTimerCreate() API function example usage scenario.\r
+ *\r
+ */\r
+#define xTimerStop( xTimer, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP, 0U, NULL, ( xBlockTime ) )\r
+\r
+/**\r
+ * portBASE_TYPE xTimerChangePeriod( xTimerHandle xTimer,\r
+ * portTickType xNewPeriod,\r
+ * portTickType xBlockTime );\r
+ *\r
+ * Timer functionality is provided by a timer service/daemon task. Many of the\r
+ * public FreeRTOS timer API functions send commands to the timer service task\r
+ * though a queue called the timer command queue. The timer command queue is\r
+ * private to the kernel itself and is not directly accessible to application\r
+ * code. The length of the timer command queue is set by the\r
+ * configTIMER_QUEUE_LENGTH configuration constant.\r
+ *\r
+ * xTimerChangePeriod() changes the period of a timer that was previously\r
+ * created using the xTimerCreate() API function.\r
+ *\r
+ * xTimerChangePeriod() can be called to change the period of an active or\r
+ * dormant state timer.\r
+ *\r
+ * The configUSE_TIMERS configuration constant must be set to 1 for\r
+ * xTimerChangePeriod() to be available.\r
+ *\r
+ * @param xTimer The handle of the timer that is having its period changed.\r
+ *\r
+ * @param xNewPeriod The new period for xTimer. Timer periods are specified in\r
+ * tick periods, so the constant portTICK_RATE_MS can be used to convert a time\r
+ * that has been specified in milliseconds. For example, if the timer must\r
+ * expire after 100 ticks, then xNewPeriod should be set to 100. Alternatively,\r
+ * if the timer must expire after 500ms, then xNewPeriod can be set to\r
+ * ( 500 / portTICK_RATE_MS ) provided configTICK_RATE_HZ is less than\r
+ * or equal to 1000.\r
+ *\r
+ * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
+ * be held in the Blocked state to wait for the change period command to be\r
+ * successfully sent to the timer command queue, should the queue already be\r
+ * full when xTimerChangePeriod() was called. xBlockTime is ignored if\r
+ * xTimerChangePeriod() is called before the scheduler is started.\r
+ *\r
+ * @return pdFAIL will be returned if the change period command could not be\r
+ * sent to the timer command queue even after xBlockTime ticks had passed.\r
+ * pdPASS will be returned if the command was successfully sent to the timer\r
+ * command queue. When the command is actually processed will depend on the\r
+ * priority of the timer service/daemon task relative to other tasks in the\r
+ * system. The timer service/daemon task priority is set by the\r
+ * configTIMER_TASK_PRIORITY configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * // This function assumes xTimer has already been created. If the timer\r
+ * // referenced by xTimer is already active when it is called, then the timer\r
+ * // is deleted. If the timer referenced by xTimer is not active when it is\r
+ * // called, then the period of the timer is set to 500ms and the timer is\r
+ * // started.\r
+ * void vAFunction( xTimerHandle xTimer )\r
+ * {\r
+ * if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"\r
+ * {\r
+ * // xTimer is already active - delete it.\r
+ * xTimerDelete( xTimer );\r
+ * }\r
+ * else\r
+ * {\r
+ * // xTimer is not active, change its period to 500ms. This will also\r
+ * // cause the timer to start. Block for a maximum of 100 ticks if the\r
+ * // change period command cannot immediately be sent to the timer\r
+ * // command queue.\r
+ * if( xTimerChangePeriod( xTimer, 500 / portTICK_RATE_MS, 100 ) == pdPASS )\r
+ * {\r
+ * // The command was successfully sent.\r
+ * }\r
+ * else\r
+ * {\r
+ * // The command could not be sent, even after waiting for 100 ticks\r
+ * // to pass. Take appropriate action here.\r
+ * }\r
+ * }\r
+ * }\r
+ */\r
+ #define xTimerChangePeriod( xTimer, xNewPeriod, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD, ( xNewPeriod ), NULL, ( xBlockTime ) )\r
+\r
+/**\r
+ * portBASE_TYPE xTimerDelete( xTimerHandle xTimer, portTickType xBlockTime );\r
+ *\r
+ * Timer functionality is provided by a timer service/daemon task. Many of the\r
+ * public FreeRTOS timer API functions send commands to the timer service task\r
+ * though a queue called the timer command queue. The timer command queue is\r
+ * private to the kernel itself and is not directly accessible to application\r
+ * code. The length of the timer command queue is set by the\r
+ * configTIMER_QUEUE_LENGTH configuration constant.\r
+ *\r
+ * xTimerDelete() deletes a timer that was previously created using the\r
+ * xTimerCreate() API function.\r
+ *\r
+ * The configUSE_TIMERS configuration constant must be set to 1 for\r
+ * xTimerDelete() to be available.\r
+ *\r
+ * @param xTimer The handle of the timer being deleted.\r
+ *\r
+ * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
+ * be held in the Blocked state to wait for the delete command to be\r
+ * successfully sent to the timer command queue, should the queue already be\r
+ * full when xTimerDelete() was called. xBlockTime is ignored if xTimerDelete()\r
+ * is called before the scheduler is started.\r
+ *\r
+ * @return pdFAIL will be returned if the delete command could not be sent to\r
+ * the timer command queue even after xBlockTime ticks had passed. pdPASS will\r
+ * be returned if the command was successfully sent to the timer command queue.\r
+ * When the command is actually processed will depend on the priority of the\r
+ * timer service/daemon task relative to other tasks in the system. The timer\r
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY\r
+ * configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * See the xTimerChangePeriod() API function example usage scenario.\r
+ */\r
+#define xTimerDelete( xTimer, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_DELETE, 0U, NULL, ( xBlockTime ) )\r
+\r
+/**\r
+ * portBASE_TYPE xTimerReset( xTimerHandle xTimer, portTickType xBlockTime );\r
+ *\r
+ * Timer functionality is provided by a timer service/daemon task. Many of the\r
+ * public FreeRTOS timer API functions send commands to the timer service task\r
+ * though a queue called the timer command queue. The timer command queue is\r
+ * private to the kernel itself and is not directly accessible to application\r
+ * code. The length of the timer command queue is set by the\r
+ * configTIMER_QUEUE_LENGTH configuration constant.\r
+ *\r
+ * xTimerReset() re-starts a timer that was previously created using the\r
+ * xTimerCreate() API function. If the timer had already been started and was\r
+ * already in the active state, then xTimerReset() will cause the timer to\r
+ * re-evaluate its expiry time so that it is relative to when xTimerReset() was\r
+ * called. If the timer was in the dormant state then xTimerReset() has\r
+ * equivalent functionality to the xTimerStart() API function.\r
+ *\r
+ * Resetting a timer ensures the timer is in the active state. If the timer\r
+ * is not stopped, deleted, or reset in the mean time, the callback function\r
+ * associated with the timer will get called 'n' ticks after xTimerReset() was\r
+ * called, where 'n' is the timers defined period.\r
+ *\r
+ * It is valid to call xTimerReset() before the scheduler has been started, but\r
+ * when this is done the timer will not actually start until the scheduler is\r
+ * started, and the timers expiry time will be relative to when the scheduler is\r
+ * started, not relative to when xTimerReset() was called.\r
+ *\r
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerReset()\r
+ * to be available.\r
+ *\r
+ * @param xTimer The handle of the timer being reset/started/restarted.\r
+ *\r
+ * @param xBlockTime Specifies the time, in ticks, that the calling task should\r
+ * be held in the Blocked state to wait for the reset command to be successfully\r
+ * sent to the timer command queue, should the queue already be full when\r
+ * xTimerReset() was called. xBlockTime is ignored if xTimerReset() is called\r
+ * before the scheduler is started.\r
+ *\r
+ * @return pdFAIL will be returned if the reset command could not be sent to\r
+ * the timer command queue even after xBlockTime ticks had passed. pdPASS will\r
+ * be returned if the command was successfully sent to the timer command queue.\r
+ * When the command is actually processed will depend on the priority of the\r
+ * timer service/daemon task relative to other tasks in the system, although the\r
+ * timers expiry time is relative to when xTimerStart() is actually called. The\r
+ * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY\r
+ * configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * // When a key is pressed, an LCD back-light is switched on. If 5 seconds pass\r
+ * // without a key being pressed, then the LCD back-light is switched off. In\r
+ * // this case, the timer is a one-shot timer.\r
+ *\r
+ * xTimerHandle xBacklightTimer = NULL;\r
+ *\r
+ * // The callback function assigned to the one-shot timer. In this case the\r
+ * // parameter is not used.\r
+ * void vBacklightTimerCallback( xTimerHandle pxTimer )\r
+ * {\r
+ * // The timer expired, therefore 5 seconds must have passed since a key\r
+ * // was pressed. Switch off the LCD back-light.\r
+ * vSetBacklightState( BACKLIGHT_OFF );\r
+ * }\r
+ *\r
+ * // The key press event handler.\r
+ * void vKeyPressEventHandler( char cKey )\r
+ * {\r
+ * // Ensure the LCD back-light is on, then reset the timer that is\r
+ * // responsible for turning the back-light off after 5 seconds of\r
+ * // key inactivity. Wait 10 ticks for the command to be successfully sent\r
+ * // if it cannot be sent immediately.\r
+ * vSetBacklightState( BACKLIGHT_ON );\r
+ * if( xTimerReset( xBacklightTimer, 100 ) != pdPASS )\r
+ * {\r
+ * // The reset command was not executed successfully. Take appropriate\r
+ * // action here.\r
+ * }\r
+ *\r
+ * // Perform the rest of the key processing here.\r
+ * }\r
+ *\r
+ * void main( void )\r
+ * {\r
+ * long x;\r
+ *\r
+ * // Create then start the one-shot timer that is responsible for turning\r
+ * // the back-light off if no keys are pressed within a 5 second period.\r
+ * xBacklightTimer = xTimerCreate( "BacklightTimer", // Just a text name, not used by the kernel.\r
+ * ( 5000 / portTICK_RATE_MS), // The timer period in ticks.\r
+ * pdFALSE, // The timer is a one-shot timer.\r
+ * 0, // The id is not used by the callback so can take any value.\r
+ * vBacklightTimerCallback // The callback function that switches the LCD back-light off.\r
+ * );\r
+ *\r
+ * if( xBacklightTimer == NULL )\r
+ * {\r
+ * // The timer was not created.\r
+ * }\r
+ * else\r
+ * {\r
+ * // Start the timer. No block time is specified, and even if one was\r
+ * // it would be ignored because the scheduler has not yet been\r
+ * // started.\r
+ * if( xTimerStart( xBacklightTimer, 0 ) != pdPASS )\r
+ * {\r
+ * // The timer could not be set into the Active state.\r
+ * }\r
+ * }\r
+ *\r
+ * // ...\r
+ * // Create tasks here.\r
+ * // ...\r
+ *\r
+ * // Starting the scheduler will start the timer running as it has already\r
+ * // been set into the active state.\r
+ * xTaskStartScheduler();\r
+ *\r
+ * // Should not reach here.\r
+ * for( ;; );\r
+ * }\r
+ */\r
+#define xTimerReset( xTimer, xBlockTime ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCount() ), NULL, ( xBlockTime ) )\r
+\r
+/**\r
+ * portBASE_TYPE xTimerStartFromISR( xTimerHandle xTimer,\r
+ * portBASE_TYPE *pxHigherPriorityTaskWoken );\r
+ *\r
+ * A version of xTimerStart() that can be called from an interrupt service\r
+ * routine.\r
+ *\r
+ * @param xTimer The handle of the timer being started/restarted.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most\r
+ * of its time in the Blocked state, waiting for messages to arrive on the timer\r
+ * command queue. Calling xTimerStartFromISR() writes a message to the timer\r
+ * command queue, so has the potential to transition the timer service/daemon\r
+ * task out of the Blocked state. If calling xTimerStartFromISR() causes the\r
+ * timer service/daemon task to leave the Blocked state, and the timer service/\r
+ * daemon task has a priority equal to or greater than the currently executing\r
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will\r
+ * get set to pdTRUE internally within the xTimerStartFromISR() function. If\r
+ * xTimerStartFromISR() sets this value to pdTRUE then a context switch should\r
+ * be performed before the interrupt exits.\r
+ *\r
+ * @return pdFAIL will be returned if the start command could not be sent to\r
+ * the timer command queue. pdPASS will be returned if the command was\r
+ * successfully sent to the timer command queue. When the command is actually\r
+ * processed will depend on the priority of the timer service/daemon task\r
+ * relative to other tasks in the system, although the timers expiry time is\r
+ * relative to when xTimerStartFromISR() is actually called. The timer service/daemon\r
+ * task priority is set by the configTIMER_TASK_PRIORITY configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * // This scenario assumes xBacklightTimer has already been created. When a\r
+ * // key is pressed, an LCD back-light is switched on. If 5 seconds pass\r
+ * // without a key being pressed, then the LCD back-light is switched off. In\r
+ * // this case, the timer is a one-shot timer, and unlike the example given for\r
+ * // the xTimerReset() function, the key press event handler is an interrupt\r
+ * // service routine.\r
+ *\r
+ * // The callback function assigned to the one-shot timer. In this case the\r
+ * // parameter is not used.\r
+ * void vBacklightTimerCallback( xTimerHandle pxTimer )\r
+ * {\r
+ * // The timer expired, therefore 5 seconds must have passed since a key\r
+ * // was pressed. Switch off the LCD back-light.\r
+ * vSetBacklightState( BACKLIGHT_OFF );\r
+ * }\r
+ *\r
+ * // The key press interrupt service routine.\r
+ * void vKeyPressEventInterruptHandler( void )\r
+ * {\r
+ * portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
+ *\r
+ * // Ensure the LCD back-light is on, then restart the timer that is\r
+ * // responsible for turning the back-light off after 5 seconds of\r
+ * // key inactivity. This is an interrupt service routine so can only\r
+ * // call FreeRTOS API functions that end in "FromISR".\r
+ * vSetBacklightState( BACKLIGHT_ON );\r
+ *\r
+ * // xTimerStartFromISR() or xTimerResetFromISR() could be called here\r
+ * // as both cause the timer to re-calculate its expiry time.\r
+ * // xHigherPriorityTaskWoken was initialised to pdFALSE when it was\r
+ * // declared (in this function).\r
+ * if( xTimerStartFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )\r
+ * {\r
+ * // The start command was not executed successfully. Take appropriate\r
+ * // action here.\r
+ * }\r
+ *\r
+ * // Perform the rest of the key processing here.\r
+ *\r
+ * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch\r
+ * // should be performed. The syntax required to perform a context switch\r
+ * // from inside an ISR varies from port to port, and from compiler to\r
+ * // compiler. Inspect the demos for the port you are using to find the\r
+ * // actual syntax required.\r
+ * if( xHigherPriorityTaskWoken != pdFALSE )\r
+ * {\r
+ * // Call the interrupt safe yield function here (actual function\r
+ * // depends on the FreeRTOS port being used.\r
+ * }\r
+ * }\r
+ */\r
+#define xTimerStartFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )\r
+\r
+/**\r
+ * portBASE_TYPE xTimerStopFromISR( xTimerHandle xTimer,\r
+ * portBASE_TYPE *pxHigherPriorityTaskWoken );\r
+ *\r
+ * A version of xTimerStop() that can be called from an interrupt service\r
+ * routine.\r
+ *\r
+ * @param xTimer The handle of the timer being stopped.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most\r
+ * of its time in the Blocked state, waiting for messages to arrive on the timer\r
+ * command queue. Calling xTimerStopFromISR() writes a message to the timer\r
+ * command queue, so has the potential to transition the timer service/daemon\r
+ * task out of the Blocked state. If calling xTimerStopFromISR() causes the\r
+ * timer service/daemon task to leave the Blocked state, and the timer service/\r
+ * daemon task has a priority equal to or greater than the currently executing\r
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will\r
+ * get set to pdTRUE internally within the xTimerStopFromISR() function. If\r
+ * xTimerStopFromISR() sets this value to pdTRUE then a context switch should\r
+ * be performed before the interrupt exits.\r
+ *\r
+ * @return pdFAIL will be returned if the stop command could not be sent to\r
+ * the timer command queue. pdPASS will be returned if the command was\r
+ * successfully sent to the timer command queue. When the command is actually\r
+ * processed will depend on the priority of the timer service/daemon task\r
+ * relative to other tasks in the system. The timer service/daemon task\r
+ * priority is set by the configTIMER_TASK_PRIORITY configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * // This scenario assumes xTimer has already been created and started. When\r
+ * // an interrupt occurs, the timer should be simply stopped.\r
+ *\r
+ * // The interrupt service routine that stops the timer.\r
+ * void vAnExampleInterruptServiceRoutine( void )\r
+ * {\r
+ * portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
+ *\r
+ * // The interrupt has occurred - simply stop the timer.\r
+ * // xHigherPriorityTaskWoken was set to pdFALSE where it was defined\r
+ * // (within this function). As this is an interrupt service routine, only\r
+ * // FreeRTOS API functions that end in "FromISR" can be used.\r
+ * if( xTimerStopFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )\r
+ * {\r
+ * // The stop command was not executed successfully. Take appropriate\r
+ * // action here.\r
+ * }\r
+ *\r
+ * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch\r
+ * // should be performed. The syntax required to perform a context switch\r
+ * // from inside an ISR varies from port to port, and from compiler to\r
+ * // compiler. Inspect the demos for the port you are using to find the\r
+ * // actual syntax required.\r
+ * if( xHigherPriorityTaskWoken != pdFALSE )\r
+ * {\r
+ * // Call the interrupt safe yield function here (actual function\r
+ * // depends on the FreeRTOS port being used.\r
+ * }\r
+ * }\r
+ */\r
+#define xTimerStopFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP, 0, ( pxHigherPriorityTaskWoken ), 0U )\r
+\r
+/**\r
+ * portBASE_TYPE xTimerChangePeriodFromISR( xTimerHandle xTimer,\r
+ * portTickType xNewPeriod,\r
+ * portBASE_TYPE *pxHigherPriorityTaskWoken );\r
+ *\r
+ * A version of xTimerChangePeriod() that can be called from an interrupt\r
+ * service routine.\r
+ *\r
+ * @param xTimer The handle of the timer that is having its period changed.\r
+ *\r
+ * @param xNewPeriod The new period for xTimer. Timer periods are specified in\r
+ * tick periods, so the constant portTICK_RATE_MS can be used to convert a time\r
+ * that has been specified in milliseconds. For example, if the timer must\r
+ * expire after 100 ticks, then xNewPeriod should be set to 100. Alternatively,\r
+ * if the timer must expire after 500ms, then xNewPeriod can be set to\r
+ * ( 500 / portTICK_RATE_MS ) provided configTICK_RATE_HZ is less than\r
+ * or equal to 1000.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most\r
+ * of its time in the Blocked state, waiting for messages to arrive on the timer\r
+ * command queue. Calling xTimerChangePeriodFromISR() writes a message to the\r
+ * timer command queue, so has the potential to transition the timer service/\r
+ * daemon task out of the Blocked state. If calling xTimerChangePeriodFromISR()\r
+ * causes the timer service/daemon task to leave the Blocked state, and the\r
+ * timer service/daemon task has a priority equal to or greater than the\r
+ * currently executing task (the task that was interrupted), then\r
+ * *pxHigherPriorityTaskWoken will get set to pdTRUE internally within the\r
+ * xTimerChangePeriodFromISR() function. If xTimerChangePeriodFromISR() sets\r
+ * this value to pdTRUE then a context switch should be performed before the\r
+ * interrupt exits.\r
+ *\r
+ * @return pdFAIL will be returned if the command to change the timers period\r
+ * could not be sent to the timer command queue. pdPASS will be returned if the\r
+ * command was successfully sent to the timer command queue. When the command\r
+ * is actually processed will depend on the priority of the timer service/daemon\r
+ * task relative to other tasks in the system. The timer service/daemon task\r
+ * priority is set by the configTIMER_TASK_PRIORITY configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * // This scenario assumes xTimer has already been created and started. When\r
+ * // an interrupt occurs, the period of xTimer should be changed to 500ms.\r
+ *\r
+ * // The interrupt service routine that changes the period of xTimer.\r
+ * void vAnExampleInterruptServiceRoutine( void )\r
+ * {\r
+ * portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
+ *\r
+ * // The interrupt has occurred - change the period of xTimer to 500ms.\r
+ * // xHigherPriorityTaskWoken was set to pdFALSE where it was defined\r
+ * // (within this function). As this is an interrupt service routine, only\r
+ * // FreeRTOS API functions that end in "FromISR" can be used.\r
+ * if( xTimerChangePeriodFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )\r
+ * {\r
+ * // The command to change the timers period was not executed\r
+ * // successfully. Take appropriate action here.\r
+ * }\r
+ *\r
+ * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch\r
+ * // should be performed. The syntax required to perform a context switch\r
+ * // from inside an ISR varies from port to port, and from compiler to\r
+ * // compiler. Inspect the demos for the port you are using to find the\r
+ * // actual syntax required.\r
+ * if( xHigherPriorityTaskWoken != pdFALSE )\r
+ * {\r
+ * // Call the interrupt safe yield function here (actual function\r
+ * // depends on the FreeRTOS port being used.\r
+ * }\r
+ * }\r
+ */\r
+#define xTimerChangePeriodFromISR( xTimer, xNewPeriod, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD, ( xNewPeriod ), ( pxHigherPriorityTaskWoken ), 0U )\r
+\r
+/**\r
+ * portBASE_TYPE xTimerResetFromISR( xTimerHandle xTimer,\r
+ * portBASE_TYPE *pxHigherPriorityTaskWoken );\r
+ *\r
+ * A version of xTimerReset() that can be called from an interrupt service\r
+ * routine.\r
+ *\r
+ * @param xTimer The handle of the timer that is to be started, reset, or\r
+ * restarted.\r
+ *\r
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most\r
+ * of its time in the Blocked state, waiting for messages to arrive on the timer\r
+ * command queue. Calling xTimerResetFromISR() writes a message to the timer\r
+ * command queue, so has the potential to transition the timer service/daemon\r
+ * task out of the Blocked state. If calling xTimerResetFromISR() causes the\r
+ * timer service/daemon task to leave the Blocked state, and the timer service/\r
+ * daemon task has a priority equal to or greater than the currently executing\r
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will\r
+ * get set to pdTRUE internally within the xTimerResetFromISR() function. If\r
+ * xTimerResetFromISR() sets this value to pdTRUE then a context switch should\r
+ * be performed before the interrupt exits.\r
+ *\r
+ * @return pdFAIL will be returned if the reset command could not be sent to\r
+ * the timer command queue. pdPASS will be returned if the command was\r
+ * successfully sent to the timer command queue. When the command is actually\r
+ * processed will depend on the priority of the timer service/daemon task\r
+ * relative to other tasks in the system, although the timers expiry time is\r
+ * relative to when xTimerResetFromISR() is actually called. The timer service/daemon\r
+ * task priority is set by the configTIMER_TASK_PRIORITY configuration constant.\r
+ *\r
+ * Example usage:\r
+ *\r
+ * // This scenario assumes xBacklightTimer has already been created. When a\r
+ * // key is pressed, an LCD back-light is switched on. If 5 seconds pass\r
+ * // without a key being pressed, then the LCD back-light is switched off. In\r
+ * // this case, the timer is a one-shot timer, and unlike the example given for\r
+ * // the xTimerReset() function, the key press event handler is an interrupt\r
+ * // service routine.\r
+ *\r
+ * // The callback function assigned to the one-shot timer. In this case the\r
+ * // parameter is not used.\r
+ * void vBacklightTimerCallback( xTimerHandle pxTimer )\r
+ * {\r
+ * // The timer expired, therefore 5 seconds must have passed since a key\r
+ * // was pressed. Switch off the LCD back-light.\r
+ * vSetBacklightState( BACKLIGHT_OFF );\r
+ * }\r
+ *\r
+ * // The key press interrupt service routine.\r
+ * void vKeyPressEventInterruptHandler( void )\r
+ * {\r
+ * portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;\r
+ *\r
+ * // Ensure the LCD back-light is on, then reset the timer that is\r
+ * // responsible for turning the back-light off after 5 seconds of\r
+ * // key inactivity. This is an interrupt service routine so can only\r
+ * // call FreeRTOS API functions that end in "FromISR".\r
+ * vSetBacklightState( BACKLIGHT_ON );\r
+ *\r
+ * // xTimerStartFromISR() or xTimerResetFromISR() could be called here\r
+ * // as both cause the timer to re-calculate its expiry time.\r
+ * // xHigherPriorityTaskWoken was initialised to pdFALSE when it was\r
+ * // declared (in this function).\r
+ * if( xTimerResetFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )\r
+ * {\r
+ * // The reset command was not executed successfully. Take appropriate\r
+ * // action here.\r
+ * }\r
+ *\r
+ * // Perform the rest of the key processing here.\r
+ *\r
+ * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch\r
+ * // should be performed. The syntax required to perform a context switch\r
+ * // from inside an ISR varies from port to port, and from compiler to\r
+ * // compiler. Inspect the demos for the port you are using to find the\r
+ * // actual syntax required.\r
+ * if( xHigherPriorityTaskWoken != pdFALSE )\r
+ * {\r
+ * // Call the interrupt safe yield function here (actual function\r
+ * // depends on the FreeRTOS port being used.\r
+ * }\r
+ * }\r
+ */\r
+#define xTimerResetFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )\r
+\r
+/*\r
+ * Functions beyond this part are not part of the public API and are intended\r
+ * for use by the kernel only.\r
+ */\r
+portBASE_TYPE xTimerCreateTimerTask( void ) PRIVILEGED_FUNCTION;\r
+portBASE_TYPE xTimerGenericCommand( xTimerHandle xTimer, portBASE_TYPE xCommandID, portTickType xOptionalValue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portTickType xBlockTime ) PRIVILEGED_FUNCTION;\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+#endif /* TIMERS_H */\r
+\r
+\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+\r
+#include <stdlib.h>\r
+#include "FreeRTOS.h"\r
+#include "list.h"\r
+\r
+/*-----------------------------------------------------------\r
+ * PUBLIC LIST API documented in list.h\r
+ *----------------------------------------------------------*/\r
+\r
+void vListInitialise( xList *pxList )\r
+{\r
+ /* The list structure contains a list item which is used to mark the\r
+ end of the list. To initialise the list the list end is inserted\r
+ as the only list entry. */\r
+ pxList->pxIndex = ( xListItem * ) &( pxList->xListEnd );\r
+\r
+ /* The list end value is the highest possible value in the list to\r
+ ensure it remains at the end of the list. */\r
+ pxList->xListEnd.xItemValue = portMAX_DELAY;\r
+\r
+ /* The list end next and previous pointers point to itself so we know\r
+ when the list is empty. */\r
+ pxList->xListEnd.pxNext = ( xListItem * ) &( pxList->xListEnd );\r
+ pxList->xListEnd.pxPrevious = ( xListItem * ) &( pxList->xListEnd );\r
+\r
+ pxList->uxNumberOfItems = ( unsigned portBASE_TYPE ) 0U;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vListInitialiseItem( xListItem *pxItem )\r
+{\r
+ /* Make sure the list item is not recorded as being on a list. */\r
+ pxItem->pvContainer = NULL;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vListInsertEnd( xList *pxList, xListItem *pxNewListItem )\r
+{\r
+volatile xListItem * pxIndex;\r
+\r
+ /* Insert a new list item into pxList, but rather than sort the list,\r
+ makes the new list item the last item to be removed by a call to\r
+ pvListGetOwnerOfNextEntry. This means it has to be the item pointed to by\r
+ the pxIndex member. */\r
+ pxIndex = pxList->pxIndex;\r
+\r
+ pxNewListItem->pxNext = pxIndex->pxNext;\r
+ pxNewListItem->pxPrevious = pxList->pxIndex;\r
+ pxIndex->pxNext->pxPrevious = ( volatile xListItem * ) pxNewListItem;\r
+ pxIndex->pxNext = ( volatile xListItem * ) pxNewListItem;\r
+ pxList->pxIndex = ( volatile xListItem * ) pxNewListItem;\r
+\r
+ /* Remember which list the item is in. */\r
+ pxNewListItem->pvContainer = ( void * ) pxList;\r
+\r
+ ( pxList->uxNumberOfItems )++;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vListInsert( xList *pxList, xListItem *pxNewListItem )\r
+{\r
+volatile xListItem *pxIterator;\r
+portTickType xValueOfInsertion;\r
+\r
+ /* Insert the new list item into the list, sorted in ulListItem order. */\r
+ xValueOfInsertion = pxNewListItem->xItemValue;\r
+\r
+ /* If the list already contains a list item with the same item value then\r
+ the new list item should be placed after it. This ensures that TCB's which\r
+ are stored in ready lists (all of which have the same ulListItem value)\r
+ get an equal share of the CPU. However, if the xItemValue is the same as\r
+ the back marker the iteration loop below will not end. This means we need\r
+ to guard against this by checking the value first and modifying the\r
+ algorithm slightly if necessary. */\r
+ if( xValueOfInsertion == portMAX_DELAY )\r
+ {\r
+ pxIterator = pxList->xListEnd.pxPrevious;\r
+ }\r
+ else\r
+ {\r
+ /* *** NOTE ***********************************************************\r
+ If you find your application is crashing here then likely causes are:\r
+ 1) Stack overflow -\r
+ see http://www.freertos.org/Stacks-and-stack-overflow-checking.html\r
+ 2) Incorrect interrupt priority assignment, especially on Cortex-M3\r
+ parts where numerically high priority values denote low actual\r
+ interrupt priories, which can seem counter intuitive. See\r
+ configMAX_SYSCALL_INTERRUPT_PRIORITY on http://www.freertos.org/a00110.html\r
+ 3) Calling an API function from within a critical section or when\r
+ the scheduler is suspended.\r
+ 4) Using a queue or semaphore before it has been initialised or\r
+ before the scheduler has been started (are interrupts firing\r
+ before vTaskStartScheduler() has been called?).\r
+ See http://www.freertos.org/FAQHelp.html for more tips.\r
+ **********************************************************************/\r
+ \r
+ for( pxIterator = ( xListItem * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext )\r
+ {\r
+ /* There is nothing to do here, we are just iterating to the\r
+ wanted insertion position. */\r
+ }\r
+ }\r
+\r
+ pxNewListItem->pxNext = pxIterator->pxNext;\r
+ pxNewListItem->pxNext->pxPrevious = ( volatile xListItem * ) pxNewListItem;\r
+ pxNewListItem->pxPrevious = pxIterator;\r
+ pxIterator->pxNext = ( volatile xListItem * ) pxNewListItem;\r
+\r
+ /* Remember which list the item is in. This allows fast removal of the\r
+ item later. */\r
+ pxNewListItem->pvContainer = ( void * ) pxList;\r
+\r
+ ( pxList->uxNumberOfItems )++;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vListRemove( xListItem *pxItemToRemove )\r
+{\r
+xList * pxList;\r
+\r
+ pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;\r
+ pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;\r
+ \r
+ /* The list item knows which list it is in. Obtain the list from the list\r
+ item. */\r
+ pxList = ( xList * ) pxItemToRemove->pvContainer;\r
+\r
+ /* Make sure the index is left pointing to a valid item. */\r
+ if( pxList->pxIndex == pxItemToRemove )\r
+ {\r
+ pxList->pxIndex = pxItemToRemove->pxPrevious;\r
+ }\r
+\r
+ pxItemToRemove->pvContainer = NULL;\r
+ ( pxList->uxNumberOfItems )--;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+/*-----------------------------------------------------------\r
+ * Implementation of functions defined in portable.h for the ARM CM3 port.\r
+ *----------------------------------------------------------*/\r
+\r
+/* Scheduler includes. */\r
+#include "FreeRTOS.h"\r
+#include "task.h"\r
+\r
+/* For backward compatibility, ensure configKERNEL_INTERRUPT_PRIORITY is\r
+defined. The value should also ensure backward compatibility.\r
+FreeRTOS.org versions prior to V4.4.0 did not include this definition. */\r
+#ifndef configKERNEL_INTERRUPT_PRIORITY\r
+ #define configKERNEL_INTERRUPT_PRIORITY 255\r
+#endif\r
+\r
+#if configMAX_SYSCALL_INTERRUPT_PRIORITY == 0\r
+ #error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html\r
+#endif\r
+\r
+/* Constants required to manipulate the NVIC. */\r
+#define portNVIC_SYSTICK_CTRL ( ( volatile unsigned long *) 0xe000e010 )\r
+#define portNVIC_SYSTICK_LOAD ( ( volatile unsigned long *) 0xe000e014 )\r
+#define portNVIC_INT_CTRL ( ( volatile unsigned long *) 0xe000ed04 )\r
+#define portNVIC_SYSPRI2 ( ( volatile unsigned long *) 0xe000ed20 )\r
+#define portNVIC_SYSTICK_CLK 0x00000004\r
+#define portNVIC_SYSTICK_INT 0x00000002\r
+#define portNVIC_SYSTICK_ENABLE 0x00000001\r
+#define portNVIC_PENDSVSET 0x10000000\r
+#define portNVIC_PENDSV_PRI ( ( ( unsigned long ) configKERNEL_INTERRUPT_PRIORITY ) << 16 )\r
+#define portNVIC_SYSTICK_PRI ( ( ( unsigned long ) configKERNEL_INTERRUPT_PRIORITY ) << 24 )\r
+\r
+/* Constants required to set up the initial stack. */\r
+#define portINITIAL_XPSR ( 0x01000000 )\r
+\r
+/* The priority used by the kernel is assigned to a variable to make access\r
+from inline assembler easier. */\r
+const unsigned long ulKernelPriority = configKERNEL_INTERRUPT_PRIORITY;\r
+\r
+/* Each task maintains its own interrupt status in the critical nesting\r
+variable. */\r
+static unsigned portBASE_TYPE uxCriticalNesting = 0xaaaaaaaa;\r
+\r
+/*\r
+ * Setup the timer to generate the tick interrupts.\r
+ */\r
+static void prvSetupTimerInterrupt( void );\r
+\r
+/*\r
+ * Exception handlers.\r
+ */\r
+void xPortPendSVHandler( void ) __attribute__ (( naked ));\r
+void xPortSysTickHandler( void );\r
+void vPortSVCHandler( void ) __attribute__ (( naked ));\r
+\r
+/*\r
+ * Start first task is a separate function so it can be tested in isolation.\r
+ */\r
+static void prvPortStartFirstTask( void ) __attribute__ (( naked ));\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * See header file for description.\r
+ */\r
+portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )\r
+{\r
+ /* Simulate the stack frame as it would be created by a context switch\r
+ interrupt. */\r
+ pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */\r
+ *pxTopOfStack = portINITIAL_XPSR; /* xPSR */\r
+ pxTopOfStack--;\r
+ *pxTopOfStack = ( portSTACK_TYPE ) pxCode; /* PC */\r
+ pxTopOfStack--;\r
+ *pxTopOfStack = 0; /* LR */\r
+ pxTopOfStack -= 5; /* R12, R3, R2 and R1. */\r
+ *pxTopOfStack = ( portSTACK_TYPE ) pvParameters; /* R0 */\r
+ pxTopOfStack -= 8; /* R11, R10, R9, R8, R7, R6, R5 and R4. */\r
+\r
+ return pxTopOfStack;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vPortSVCHandler( void )\r
+{\r
+ __asm volatile (\r
+ " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */\r
+ " ldr r1, [r3] \n" /* Use pxCurrentTCBConst to get the pxCurrentTCB address. */\r
+ " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */\r
+ " ldmia r0!, {r4-r11} \n" /* Pop the registers that are not automatically saved on exception entry and the critical nesting count. */\r
+ " msr psp, r0 \n" /* Restore the task stack pointer. */\r
+ " mov r0, #0 \n"\r
+ " msr basepri, r0 \n"\r
+ " orr r14, #0xd \n"\r
+ " bx r14 \n"\r
+ " \n"\r
+ " .align 2 \n"\r
+ "pxCurrentTCBConst2: .word pxCurrentTCB \n"\r
+ );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvPortStartFirstTask( void )\r
+{\r
+ __asm volatile(\r
+ " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */\r
+ " ldr r0, [r0] \n"\r
+ " ldr r0, [r0] \n"\r
+ " msr msp, r0 \n" /* Set the msp back to the start of the stack. */\r
+ " cpsie i \n" /* Globally enable interrupts. */\r
+ " svc 0 \n" /* System call to start first task. */\r
+ " nop \n"\r
+ );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * See header file for description.\r
+ */\r
+portBASE_TYPE xPortStartScheduler( void )\r
+{\r
+ /* Make PendSV, CallSV and SysTick the same priroity as the kernel. */\r
+ *(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;\r
+ *(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;\r
+\r
+ /* Start the timer that generates the tick ISR. Interrupts are disabled\r
+ here already. */\r
+ prvSetupTimerInterrupt();\r
+\r
+ /* Initialise the critical nesting count ready for the first task. */\r
+ uxCriticalNesting = 0;\r
+\r
+ /* Start the first task. */\r
+ prvPortStartFirstTask();\r
+\r
+ /* Should not get here! */\r
+ return 0;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vPortEndScheduler( void )\r
+{\r
+ /* It is unlikely that the CM3 port will require this function as there\r
+ is nothing to return to. */\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vPortYieldFromISR( void )\r
+{\r
+ /* Set a PendSV to request a context switch. */\r
+ *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vPortEnterCritical( void )\r
+{\r
+ portDISABLE_INTERRUPTS();\r
+ uxCriticalNesting++;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vPortExitCritical( void )\r
+{\r
+ uxCriticalNesting--;\r
+ if( uxCriticalNesting == 0 )\r
+ {\r
+ portENABLE_INTERRUPTS();\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void xPortPendSVHandler( void )\r
+{\r
+ /* This is a naked function. */\r
+\r
+ __asm volatile\r
+ (\r
+ " mrs r0, psp \n"\r
+ " \n"\r
+ " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */\r
+ " ldr r2, [r3] \n"\r
+ " \n"\r
+ " stmdb r0!, {r4-r11} \n" /* Save the remaining registers. */\r
+ " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */\r
+ " \n"\r
+ " stmdb sp!, {r3, r14} \n"\r
+ " mov r0, %0 \n"\r
+ " msr basepri, r0 \n"\r
+ " bl vTaskSwitchContext \n"\r
+ " mov r0, #0 \n"\r
+ " msr basepri, r0 \n"\r
+ " ldmia sp!, {r3, r14} \n"\r
+ " \n" /* Restore the context, including the critical nesting count. */\r
+ " ldr r1, [r3] \n"\r
+ " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */\r
+ " ldmia r0!, {r4-r11} \n" /* Pop the registers. */\r
+ " msr psp, r0 \n"\r
+ " bx r14 \n"\r
+ " \n"\r
+ " .align 2 \n"\r
+ "pxCurrentTCBConst: .word pxCurrentTCB \n"\r
+ ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY)\r
+ );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void xPortSysTickHandler( void )\r
+{\r
+unsigned long ulDummy;\r
+\r
+ /* If using preemption, also force a context switch. */\r
+ #if configUSE_PREEMPTION == 1\r
+ *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET;\r
+ #endif\r
+\r
+ ulDummy = portSET_INTERRUPT_MASK_FROM_ISR();\r
+ {\r
+ vTaskIncrementTick();\r
+ }\r
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( ulDummy );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * Setup the systick timer to generate the tick interrupts at the required\r
+ * frequency.\r
+ */\r
+void prvSetupTimerInterrupt( void )\r
+{\r
+ /* Configure SysTick to interrupt at the requested rate. */\r
+ *(portNVIC_SYSTICK_LOAD) = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;\r
+ *(portNVIC_SYSTICK_CTRL) = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+ \r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+\r
+#ifndef PORTMACRO_H\r
+#define PORTMACRO_H\r
+\r
+#ifdef __cplusplus\r
+extern "C" {\r
+#endif\r
+\r
+/*-----------------------------------------------------------\r
+ * Port specific definitions. \r
+ *\r
+ * The settings in this file configure FreeRTOS correctly for the\r
+ * given hardware and compiler.\r
+ *\r
+ * These settings should not be altered.\r
+ *-----------------------------------------------------------\r
+ */\r
+\r
+/* Type definitions. */\r
+#define portCHAR char\r
+#define portFLOAT float\r
+#define portDOUBLE double\r
+#define portLONG long\r
+#define portSHORT short\r
+#define portSTACK_TYPE unsigned portLONG\r
+#define portBASE_TYPE long\r
+\r
+#if( configUSE_16_BIT_TICKS == 1 )\r
+ typedef unsigned portSHORT portTickType;\r
+ #define portMAX_DELAY ( portTickType ) 0xffff\r
+#else\r
+ typedef unsigned portLONG portTickType;\r
+ #define portMAX_DELAY ( portTickType ) 0xffffffff\r
+#endif\r
+/*-----------------------------------------------------------*/ \r
+\r
+/* Architecture specifics. */\r
+#define portSTACK_GROWTH ( -1 )\r
+#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ ) \r
+#define portBYTE_ALIGNMENT 8\r
+/*-----------------------------------------------------------*/ \r
+\r
+\r
+/* Scheduler utilities. */\r
+extern void vPortYieldFromISR( void );\r
+\r
+#define portYIELD() vPortYieldFromISR()\r
+\r
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) vPortYieldFromISR()\r
+/*-----------------------------------------------------------*/\r
+\r
+\r
+/* Critical section management. */\r
+\r
+/* \r
+ * Set basepri to portMAX_SYSCALL_INTERRUPT_PRIORITY without effecting other\r
+ * registers. r0 is clobbered.\r
+ */ \r
+#define portSET_INTERRUPT_MASK() \\r
+ __asm volatile \\r
+ ( \\r
+ " mov r0, %0 \n" \\r
+ " msr basepri, r0 \n" \\r
+ ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY):"r0" \\r
+ )\r
+ \r
+/*\r
+ * Set basepri back to 0 without effective other registers.\r
+ * r0 is clobbered.\r
+ */\r
+#define portCLEAR_INTERRUPT_MASK() \\r
+ __asm volatile \\r
+ ( \\r
+ " mov r0, #0 \n" \\r
+ " msr basepri, r0 \n" \\r
+ :::"r0" \\r
+ )\r
+\r
+#define portSET_INTERRUPT_MASK_FROM_ISR() 0;portSET_INTERRUPT_MASK()\r
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) portCLEAR_INTERRUPT_MASK();(void)x\r
+\r
+\r
+extern void vPortEnterCritical( void );\r
+extern void vPortExitCritical( void );\r
+\r
+#define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()\r
+#define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()\r
+#define portENTER_CRITICAL() vPortEnterCritical()\r
+#define portEXIT_CRITICAL() vPortExitCritical()\r
+/*-----------------------------------------------------------*/\r
+\r
+/* Task function macros as described on the FreeRTOS.org WEB site. */\r
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )\r
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )\r
+\r
+#define portNOP()\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+\r
+#endif /* PORTMACRO_H */\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+ \r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+/*\r
+ * A sample implementation of pvPortMalloc() and vPortFree() that permits\r
+ * allocated blocks to be freed, but does not combine adjacent free blocks\r
+ * into a single larger block.\r
+ *\r
+ * See heap_1.c and heap_3.c for alternative implementations, and the memory\r
+ * management pages of http://www.FreeRTOS.org for more information.\r
+ */\r
+#include <stdlib.h>\r
+\r
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining\r
+all the API functions to use the MPU wrappers. That should only be done when\r
+task.h is included from an application file. */\r
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+#include "FreeRTOS.h"\r
+#include "task.h"\r
+\r
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+/* Allocate the memory for the heap. The struct is used to force byte\r
+alignment without using any non-portable code. */\r
+static union xRTOS_HEAP\r
+{\r
+ #if portBYTE_ALIGNMENT == 8\r
+ volatile portDOUBLE dDummy;\r
+ #else\r
+ volatile unsigned long ulDummy;\r
+ #endif\r
+ unsigned char ucHeap[ configTOTAL_HEAP_SIZE ];\r
+} xHeap;\r
+\r
+/* Define the linked list structure. This is used to link free blocks in order\r
+of their size. */\r
+typedef struct A_BLOCK_LINK\r
+{\r
+ struct A_BLOCK_LINK *pxNextFreeBlock; /*<< The next free block in the list. */\r
+ size_t xBlockSize; /*<< The size of the free block. */\r
+} xBlockLink;\r
+\r
+\r
+static const unsigned short heapSTRUCT_SIZE = ( sizeof( xBlockLink ) + portBYTE_ALIGNMENT - ( sizeof( xBlockLink ) % portBYTE_ALIGNMENT ) );\r
+#define heapMINIMUM_BLOCK_SIZE ( ( size_t ) ( heapSTRUCT_SIZE * 2 ) )\r
+\r
+/* Create a couple of list links to mark the start and end of the list. */\r
+static xBlockLink xStart, xEnd;\r
+\r
+/* Keeps track of the number of free bytes remaining, but says nothing about\r
+fragmentation. */\r
+static size_t xFreeBytesRemaining = configTOTAL_HEAP_SIZE;\r
+\r
+/* STATIC FUNCTIONS ARE DEFINED AS MACROS TO MINIMIZE THE FUNCTION CALL DEPTH. */\r
+\r
+/*\r
+ * Insert a block into the list of free blocks - which is ordered by size of\r
+ * the block. Small blocks at the start of the list and large blocks at the end\r
+ * of the list.\r
+ */\r
+#define prvInsertBlockIntoFreeList( pxBlockToInsert ) \\r
+{ \\r
+xBlockLink *pxIterator; \\r
+size_t xBlockSize; \\r
+ \\r
+ xBlockSize = pxBlockToInsert->xBlockSize; \\r
+ \\r
+ /* Iterate through the list until a block is found that has a larger size */ \\r
+ /* than the block we are inserting. */ \\r
+ for( pxIterator = &xStart; pxIterator->pxNextFreeBlock->xBlockSize < xBlockSize; pxIterator = pxIterator->pxNextFreeBlock ) \\r
+ { \\r
+ /* There is nothing to do here - just iterate to the correct position. */ \\r
+ } \\r
+ \\r
+ /* Update the list to include the block being inserted in the correct */ \\r
+ /* position. */ \\r
+ pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock; \\r
+ pxIterator->pxNextFreeBlock = pxBlockToInsert; \\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#define prvHeapInit() \\r
+{ \\r
+xBlockLink *pxFirstFreeBlock; \\r
+ \\r
+ /* xStart is used to hold a pointer to the first item in the list of free */ \\r
+ /* blocks. The void cast is used to prevent compiler warnings. */ \\r
+ xStart.pxNextFreeBlock = ( void * ) xHeap.ucHeap; \\r
+ xStart.xBlockSize = ( size_t ) 0; \\r
+ \\r
+ /* xEnd is used to mark the end of the list of free blocks. */ \\r
+ xEnd.xBlockSize = configTOTAL_HEAP_SIZE; \\r
+ xEnd.pxNextFreeBlock = NULL; \\r
+ \\r
+ /* To start with there is a single free block that is sized to take up the \\r
+ entire heap space. */ \\r
+ pxFirstFreeBlock = ( void * ) xHeap.ucHeap; \\r
+ pxFirstFreeBlock->xBlockSize = configTOTAL_HEAP_SIZE; \\r
+ pxFirstFreeBlock->pxNextFreeBlock = &xEnd; \\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void *pvPortMalloc( size_t xWantedSize )\r
+{\r
+xBlockLink *pxBlock, *pxPreviousBlock, *pxNewBlockLink;\r
+static portBASE_TYPE xHeapHasBeenInitialised = pdFALSE;\r
+void *pvReturn = NULL;\r
+\r
+ vTaskSuspendAll();\r
+ {\r
+ /* If this is the first call to malloc then the heap will require\r
+ initialisation to setup the list of free blocks. */\r
+ if( xHeapHasBeenInitialised == pdFALSE )\r
+ {\r
+ prvHeapInit();\r
+ xHeapHasBeenInitialised = pdTRUE;\r
+ }\r
+\r
+ /* The wanted size is increased so it can contain a xBlockLink\r
+ structure in addition to the requested amount of bytes. */\r
+ if( xWantedSize > 0 )\r
+ {\r
+ xWantedSize += heapSTRUCT_SIZE;\r
+\r
+ /* Ensure that blocks are always aligned to the required number of bytes. */\r
+ if( xWantedSize & portBYTE_ALIGNMENT_MASK )\r
+ {\r
+ /* Byte alignment required. */\r
+ xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );\r
+ }\r
+ }\r
+\r
+ if( ( xWantedSize > 0 ) && ( xWantedSize < configTOTAL_HEAP_SIZE ) )\r
+ {\r
+ /* Blocks are stored in byte order - traverse the list from the start\r
+ (smallest) block until one of adequate size is found. */\r
+ pxPreviousBlock = &xStart;\r
+ pxBlock = xStart.pxNextFreeBlock;\r
+ while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock ) )\r
+ {\r
+ pxPreviousBlock = pxBlock;\r
+ pxBlock = pxBlock->pxNextFreeBlock;\r
+ }\r
+\r
+ /* If we found the end marker then a block of adequate size was not found. */\r
+ if( pxBlock != &xEnd )\r
+ {\r
+ /* Return the memory space - jumping over the xBlockLink structure\r
+ at its start. */\r
+ pvReturn = ( void * ) ( ( ( unsigned char * ) pxPreviousBlock->pxNextFreeBlock ) + heapSTRUCT_SIZE );\r
+\r
+ /* This block is being returned for use so must be taken our of the\r
+ list of free blocks. */\r
+ pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;\r
+\r
+ /* If the block is larger than required it can be split into two. */\r
+ if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )\r
+ {\r
+ /* This block is to be split into two. Create a new block\r
+ following the number of bytes requested. The void cast is\r
+ used to prevent byte alignment warnings from the compiler. */\r
+ pxNewBlockLink = ( void * ) ( ( ( unsigned char * ) pxBlock ) + xWantedSize );\r
+\r
+ /* Calculate the sizes of two blocks split from the single\r
+ block. */\r
+ pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;\r
+ pxBlock->xBlockSize = xWantedSize;\r
+\r
+ /* Insert the new block into the list of free blocks. */\r
+ prvInsertBlockIntoFreeList( ( pxNewBlockLink ) );\r
+ }\r
+ \r
+ xFreeBytesRemaining -= pxBlock->xBlockSize;\r
+ }\r
+ }\r
+ }\r
+ xTaskResumeAll();\r
+\r
+ #if( configUSE_MALLOC_FAILED_HOOK == 1 )\r
+ {\r
+ if( pvReturn == NULL )\r
+ {\r
+ extern void vApplicationMallocFailedHook( void );\r
+ vApplicationMallocFailedHook();\r
+ }\r
+ }\r
+ #endif\r
+\r
+ return pvReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vPortFree( void *pv )\r
+{\r
+unsigned char *puc = ( unsigned char * ) pv;\r
+xBlockLink *pxLink;\r
+\r
+ if( pv )\r
+ {\r
+ /* The memory being freed will have an xBlockLink structure immediately\r
+ before it. */\r
+ puc -= heapSTRUCT_SIZE;\r
+\r
+ /* This casting is to keep the compiler from issuing warnings. */\r
+ pxLink = ( void * ) puc;\r
+\r
+ vTaskSuspendAll();\r
+ {\r
+ /* Add this block to the list of free blocks. */\r
+ prvInsertBlockIntoFreeList( ( ( xBlockLink * ) pxLink ) );\r
+ xFreeBytesRemaining += pxLink->xBlockSize;\r
+ }\r
+ xTaskResumeAll();\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+size_t xPortGetFreeHeapSize( void )\r
+{\r
+ return xFreeBytesRemaining;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vPortInitialiseBlocks( void )\r
+{\r
+ /* This just exists to keep the linker quiet. */\r
+}\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+#include <stdlib.h>\r
+#include <string.h>\r
+\r
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining\r
+all the API functions to use the MPU wrappers. That should only be done when\r
+task.h is included from an application file. */\r
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+#include "FreeRTOS.h"\r
+#include "task.h"\r
+\r
+#if ( configUSE_CO_ROUTINES == 1 )\r
+ #include "croutine.h"\r
+#endif\r
+\r
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+/*-----------------------------------------------------------\r
+ * PUBLIC LIST API documented in list.h\r
+ *----------------------------------------------------------*/\r
+\r
+/* Constants used with the cRxLock and cTxLock structure members. */\r
+#define queueUNLOCKED ( ( signed portBASE_TYPE ) -1 )\r
+#define queueLOCKED_UNMODIFIED ( ( signed portBASE_TYPE ) 0 )\r
+\r
+#define queueERRONEOUS_UNBLOCK ( -1 )\r
+\r
+/* For internal use only. */\r
+#define queueSEND_TO_BACK ( 0 )\r
+#define queueSEND_TO_FRONT ( 1 )\r
+\r
+/* Effectively make a union out of the xQUEUE structure. */\r
+#define pxMutexHolder pcTail\r
+#define uxQueueType pcHead\r
+#define uxRecursiveCallCount pcReadFrom\r
+#define queueQUEUE_IS_MUTEX NULL\r
+\r
+/* Semaphores do not actually store or copy data, so have an items size of\r
+zero. */\r
+#define queueSEMAPHORE_QUEUE_ITEM_LENGTH ( ( unsigned portBASE_TYPE ) 0 )\r
+#define queueDONT_BLOCK ( ( portTickType ) 0U )\r
+#define queueMUTEX_GIVE_BLOCK_TIME ( ( portTickType ) 0U )\r
+\r
+/* These definitions *must* match those in queue.h. */\r
+#define queueQUEUE_TYPE_BASE ( 0U )\r
+#define queueQUEUE_TYPE_MUTEX ( 1U )\r
+#define queueQUEUE_TYPE_COUNTING_SEMAPHORE ( 2U )\r
+#define queueQUEUE_TYPE_BINARY_SEMAPHORE ( 3U )\r
+#define queueQUEUE_TYPE_RECURSIVE_MUTEX ( 4U )\r
+\r
+/*\r
+ * Definition of the queue used by the scheduler.\r
+ * Items are queued by copy, not reference.\r
+ */\r
+typedef struct QueueDefinition\r
+{\r
+ signed char *pcHead; /*< Points to the beginning of the queue storage area. */\r
+ signed char *pcTail; /*< Points to the byte at the end of the queue storage area. Once more byte is allocated than necessary to store the queue items, this is used as a marker. */\r
+\r
+ signed char *pcWriteTo; /*< Points to the free next place in the storage area. */\r
+ signed char *pcReadFrom; /*< Points to the last place that a queued item was read from. */\r
+\r
+ xList xTasksWaitingToSend; /*< List of tasks that are blocked waiting to post onto this queue. Stored in priority order. */\r
+ xList xTasksWaitingToReceive; /*< List of tasks that are blocked waiting to read from this queue. Stored in priority order. */\r
+\r
+ volatile unsigned portBASE_TYPE uxMessagesWaiting;/*< The number of items currently in the queue. */\r
+ unsigned portBASE_TYPE uxLength; /*< The length of the queue defined as the number of items it will hold, not the number of bytes. */\r
+ unsigned portBASE_TYPE uxItemSize; /*< The size of each items that the queue will hold. */\r
+\r
+ signed portBASE_TYPE xRxLock; /*< Stores the number of items received from the queue (removed from the queue) while the queue was locked. Set to queueUNLOCKED when the queue is not locked. */\r
+ signed portBASE_TYPE xTxLock; /*< Stores the number of items transmitted to the queue (added to the queue) while the queue was locked. Set to queueUNLOCKED when the queue is not locked. */\r
+ \r
+ #if ( configUSE_TRACE_FACILITY == 1 )\r
+ unsigned char ucQueueNumber;\r
+ unsigned char ucQueueType;\r
+ #endif\r
+\r
+} xQUEUE;\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * Inside this file xQueueHandle is a pointer to a xQUEUE structure.\r
+ * To keep the definition private the API header file defines it as a\r
+ * pointer to void.\r
+ */\r
+typedef xQUEUE * xQueueHandle;\r
+\r
+/*\r
+ * Prototypes for public functions are included here so we don't have to\r
+ * include the API header file (as it defines xQueueHandle differently). These\r
+ * functions are documented in the API header file.\r
+ */\r
+xQueueHandle xQueueGenericCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize, unsigned char ucQueueType ) PRIVILEGED_FUNCTION;\r
+signed portBASE_TYPE xQueueGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;\r
+unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+void vQueueDelete( xQueueHandle xQueue ) PRIVILEGED_FUNCTION;\r
+signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;\r
+signed portBASE_TYPE xQueueGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking ) PRIVILEGED_FUNCTION;\r
+signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;\r
+xQueueHandle xQueueCreateMutex( unsigned char ucQueueType ) PRIVILEGED_FUNCTION;\r
+xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount ) PRIVILEGED_FUNCTION;\r
+portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle xMutex, portTickType xBlockTime ) PRIVILEGED_FUNCTION;\r
+portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle xMutex ) PRIVILEGED_FUNCTION;\r
+signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;\r
+signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking ) PRIVILEGED_FUNCTION;\r
+signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+void vQueueWaitForMessageRestricted( xQueueHandle pxQueue, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
+unsigned char ucQueueGetQueueNumber( xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+void vQueueSetQueueNumber( xQueueHandle pxQueue, unsigned char ucQueueNumber ) PRIVILEGED_FUNCTION;\r
+unsigned char ucQueueGetQueueType( xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+portBASE_TYPE xQueueGenericReset( xQueueHandle pxQueue, portBASE_TYPE xNewQueue ) PRIVILEGED_FUNCTION;\r
+xTaskHandle xQueueGetMutexHolder( xQueueHandle xSemaphore ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Co-routine queue functions differ from task queue functions. Co-routines are\r
+ * an optional component.\r
+ */\r
+#if configUSE_CO_ROUTINES == 1\r
+ signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken ) PRIVILEGED_FUNCTION;\r
+ signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxTaskWoken ) PRIVILEGED_FUNCTION;\r
+ signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
+ signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;\r
+#endif\r
+\r
+/*\r
+ * The queue registry is just a means for kernel aware debuggers to locate\r
+ * queue structures. It has no other purpose so is an optional component.\r
+ */\r
+#if configQUEUE_REGISTRY_SIZE > 0\r
+\r
+ /* The type stored within the queue registry array. This allows a name\r
+ to be assigned to each queue making kernel aware debugging a little\r
+ more user friendly. */\r
+ typedef struct QUEUE_REGISTRY_ITEM\r
+ {\r
+ signed char *pcQueueName;\r
+ xQueueHandle xHandle;\r
+ } xQueueRegistryItem;\r
+\r
+ /* The queue registry is simply an array of xQueueRegistryItem structures.\r
+ The pcQueueName member of a structure being NULL is indicative of the\r
+ array position being vacant. */\r
+ xQueueRegistryItem xQueueRegistry[ configQUEUE_REGISTRY_SIZE ];\r
+\r
+ /* Removes a queue from the registry by simply setting the pcQueueName\r
+ member to NULL. */\r
+ static void vQueueUnregisterQueue( xQueueHandle xQueue ) PRIVILEGED_FUNCTION;\r
+ void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcQueueName ) PRIVILEGED_FUNCTION;\r
+#endif\r
+\r
+/*\r
+ * Unlocks a queue locked by a call to prvLockQueue. Locking a queue does not\r
+ * prevent an ISR from adding or removing items to the queue, but does prevent\r
+ * an ISR from removing tasks from the queue event lists. If an ISR finds a\r
+ * queue is locked it will instead increment the appropriate queue lock count\r
+ * to indicate that a task may require unblocking. When the queue in unlocked\r
+ * these lock counts are inspected, and the appropriate action taken.\r
+ */\r
+static void prvUnlockQueue( xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Uses a critical section to determine if there is any data in a queue.\r
+ *\r
+ * @return pdTRUE if the queue contains no items, otherwise pdFALSE.\r
+ */\r
+static signed portBASE_TYPE prvIsQueueEmpty( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Uses a critical section to determine if there is any space in a queue.\r
+ *\r
+ * @return pdTRUE if there is no space, otherwise pdFALSE;\r
+ */\r
+static signed portBASE_TYPE prvIsQueueFull( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Copies an item into the queue, either at the front of the queue or the\r
+ * back of the queue.\r
+ */\r
+static void prvCopyDataToQueue( xQUEUE *pxQueue, const void *pvItemToQueue, portBASE_TYPE xPosition ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Copies an item out of a queue.\r
+ */\r
+static void prvCopyDataFromQueue( xQUEUE * const pxQueue, const void *pvBuffer ) PRIVILEGED_FUNCTION;\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * Macro to mark a queue as locked. Locking a queue prevents an ISR from\r
+ * accessing the queue event lists.\r
+ */\r
+#define prvLockQueue( pxQueue ) \\r
+ taskENTER_CRITICAL(); \\r
+ { \\r
+ if( ( pxQueue )->xRxLock == queueUNLOCKED ) \\r
+ { \\r
+ ( pxQueue )->xRxLock = queueLOCKED_UNMODIFIED; \\r
+ } \\r
+ if( ( pxQueue )->xTxLock == queueUNLOCKED ) \\r
+ { \\r
+ ( pxQueue )->xTxLock = queueLOCKED_UNMODIFIED; \\r
+ } \\r
+ } \\r
+ taskEXIT_CRITICAL()\r
+/*-----------------------------------------------------------*/\r
+\r
+\r
+/*-----------------------------------------------------------\r
+ * PUBLIC QUEUE MANAGEMENT API documented in queue.h\r
+ *----------------------------------------------------------*/\r
+\r
+portBASE_TYPE xQueueGenericReset( xQueueHandle pxQueue, portBASE_TYPE xNewQueue )\r
+{\r
+ configASSERT( pxQueue );\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ pxQueue->pcTail = pxQueue->pcHead + ( pxQueue->uxLength * pxQueue->uxItemSize );\r
+ pxQueue->uxMessagesWaiting = ( unsigned portBASE_TYPE ) 0U;\r
+ pxQueue->pcWriteTo = pxQueue->pcHead;\r
+ pxQueue->pcReadFrom = pxQueue->pcHead + ( ( pxQueue->uxLength - ( unsigned portBASE_TYPE ) 1U ) * pxQueue->uxItemSize );\r
+ pxQueue->xRxLock = queueUNLOCKED;\r
+ pxQueue->xTxLock = queueUNLOCKED;\r
+\r
+ if( xNewQueue == pdFALSE )\r
+ {\r
+ /* If there are tasks blocked waiting to read from the queue, then \r
+ the tasks will remain blocked as after this function exits the queue \r
+ will still be empty. If there are tasks blocked waiting to write to \r
+ the queue, then one should be unblocked as after this function exits \r
+ it will be possible to write to it. */\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
+ {\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* Ensure the event queues start in the correct state. */\r
+ vListInitialise( &( pxQueue->xTasksWaitingToSend ) );\r
+ vListInitialise( &( pxQueue->xTasksWaitingToReceive ) ); \r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ /* A value is returned for calling semantic consistency with previous\r
+ versions. */\r
+ return pdPASS;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+xQueueHandle xQueueGenericCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize, unsigned char ucQueueType )\r
+{\r
+xQUEUE *pxNewQueue;\r
+size_t xQueueSizeInBytes;\r
+xQueueHandle xReturn = NULL;\r
+\r
+ /* Remove compiler warnings about unused parameters should\r
+ configUSE_TRACE_FACILITY not be set to 1. */\r
+ ( void ) ucQueueType;\r
+\r
+ /* Allocate the new queue structure. */\r
+ if( uxQueueLength > ( unsigned portBASE_TYPE ) 0 )\r
+ {\r
+ pxNewQueue = ( xQUEUE * ) pvPortMalloc( sizeof( xQUEUE ) );\r
+ if( pxNewQueue != NULL )\r
+ {\r
+ /* Create the list of pointers to queue items. The queue is one byte\r
+ longer than asked for to make wrap checking easier/faster. */\r
+ xQueueSizeInBytes = ( size_t ) ( uxQueueLength * uxItemSize ) + ( size_t ) 1;\r
+\r
+ pxNewQueue->pcHead = ( signed char * ) pvPortMalloc( xQueueSizeInBytes );\r
+ if( pxNewQueue->pcHead != NULL )\r
+ {\r
+ /* Initialise the queue members as described above where the\r
+ queue type is defined. */\r
+ pxNewQueue->uxLength = uxQueueLength;\r
+ pxNewQueue->uxItemSize = uxItemSize;\r
+ xQueueGenericReset( pxNewQueue, pdTRUE );\r
+ #if ( configUSE_TRACE_FACILITY == 1 )\r
+ {\r
+ pxNewQueue->ucQueueType = ucQueueType;\r
+ }\r
+ #endif /* configUSE_TRACE_FACILITY */\r
+\r
+ traceQUEUE_CREATE( pxNewQueue );\r
+ xReturn = pxNewQueue;\r
+ }\r
+ else\r
+ {\r
+ traceQUEUE_CREATE_FAILED( ucQueueType );\r
+ vPortFree( pxNewQueue );\r
+ }\r
+ }\r
+ }\r
+\r
+ configASSERT( xReturn );\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_MUTEXES == 1 )\r
+\r
+ xQueueHandle xQueueCreateMutex( unsigned char ucQueueType )\r
+ {\r
+ xQUEUE *pxNewQueue;\r
+\r
+ /* Prevent compiler warnings about unused parameters if\r
+ configUSE_TRACE_FACILITY does not equal 1. */\r
+ ( void ) ucQueueType;\r
+\r
+ /* Allocate the new queue structure. */\r
+ pxNewQueue = ( xQUEUE * ) pvPortMalloc( sizeof( xQUEUE ) );\r
+ if( pxNewQueue != NULL )\r
+ {\r
+ /* Information required for priority inheritance. */\r
+ pxNewQueue->pxMutexHolder = NULL;\r
+ pxNewQueue->uxQueueType = queueQUEUE_IS_MUTEX;\r
+\r
+ /* Queues used as a mutex no data is actually copied into or out\r
+ of the queue. */\r
+ pxNewQueue->pcWriteTo = NULL;\r
+ pxNewQueue->pcReadFrom = NULL;\r
+\r
+ /* Each mutex has a length of 1 (like a binary semaphore) and\r
+ an item size of 0 as nothing is actually copied into or out\r
+ of the mutex. */\r
+ pxNewQueue->uxMessagesWaiting = ( unsigned portBASE_TYPE ) 0U;\r
+ pxNewQueue->uxLength = ( unsigned portBASE_TYPE ) 1U;\r
+ pxNewQueue->uxItemSize = ( unsigned portBASE_TYPE ) 0U;\r
+ pxNewQueue->xRxLock = queueUNLOCKED;\r
+ pxNewQueue->xTxLock = queueUNLOCKED;\r
+\r
+ #if ( configUSE_TRACE_FACILITY == 1 )\r
+ {\r
+ pxNewQueue->ucQueueType = ucQueueType;\r
+ }\r
+ #endif\r
+\r
+ /* Ensure the event queues start with the correct state. */\r
+ vListInitialise( &( pxNewQueue->xTasksWaitingToSend ) );\r
+ vListInitialise( &( pxNewQueue->xTasksWaitingToReceive ) );\r
+\r
+ traceCREATE_MUTEX( pxNewQueue );\r
+\r
+ /* Start with the semaphore in the expected state. */\r
+ xQueueGenericSend( pxNewQueue, NULL, ( portTickType ) 0U, queueSEND_TO_BACK );\r
+ }\r
+ else\r
+ {\r
+ traceCREATE_MUTEX_FAILED();\r
+ }\r
+\r
+ configASSERT( pxNewQueue );\r
+ return pxNewQueue;\r
+ }\r
+\r
+#endif /* configUSE_MUTEXES */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( ( configUSE_MUTEXES == 1 ) && ( INCLUDE_xQueueGetMutexHolder == 1 ) )\r
+\r
+ void* xQueueGetMutexHolder( xQueueHandle xSemaphore )\r
+ {\r
+ void *pxReturn;\r
+\r
+ /* This function is called by xSemaphoreGetMutexHolder(), and should not\r
+ be called directly. Note: This is is a good way of determining if the\r
+ calling task is the mutex holder, but not a good way of determining the\r
+ identity of the mutex holder, as the holder may change between the \r
+ following critical section exiting and the function returning. */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ if( xSemaphore->uxQueueType == queueQUEUE_IS_MUTEX )\r
+ {\r
+ pxReturn = ( void * ) xSemaphore->pxMutexHolder;\r
+ }\r
+ else\r
+ {\r
+ pxReturn = NULL;\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+ \r
+ return pxReturn;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_RECURSIVE_MUTEXES == 1 )\r
+\r
+ portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle pxMutex )\r
+ {\r
+ portBASE_TYPE xReturn;\r
+\r
+ configASSERT( pxMutex );\r
+\r
+ /* If this is the task that holds the mutex then pxMutexHolder will not\r
+ change outside of this task. If this task does not hold the mutex then\r
+ pxMutexHolder can never coincidentally equal the tasks handle, and as\r
+ this is the only condition we are interested in it does not matter if\r
+ pxMutexHolder is accessed simultaneously by another task. Therefore no\r
+ mutual exclusion is required to test the pxMutexHolder variable. */\r
+ if( pxMutex->pxMutexHolder == xTaskGetCurrentTaskHandle() )\r
+ {\r
+ traceGIVE_MUTEX_RECURSIVE( pxMutex );\r
+\r
+ /* uxRecursiveCallCount cannot be zero if pxMutexHolder is equal to\r
+ the task handle, therefore no underflow check is required. Also,\r
+ uxRecursiveCallCount is only modified by the mutex holder, and as\r
+ there can only be one, no mutual exclusion is required to modify the\r
+ uxRecursiveCallCount member. */\r
+ ( pxMutex->uxRecursiveCallCount )--;\r
+\r
+ /* Have we unwound the call count? */\r
+ if( pxMutex->uxRecursiveCallCount == 0 )\r
+ {\r
+ /* Return the mutex. This will automatically unblock any other\r
+ task that might be waiting to access the mutex. */\r
+ xQueueGenericSend( pxMutex, NULL, queueMUTEX_GIVE_BLOCK_TIME, queueSEND_TO_BACK );\r
+ }\r
+\r
+ xReturn = pdPASS;\r
+ }\r
+ else\r
+ {\r
+ /* We cannot give the mutex because we are not the holder. */\r
+ xReturn = pdFAIL;\r
+\r
+ traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex );\r
+ }\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif /* configUSE_RECURSIVE_MUTEXES */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_RECURSIVE_MUTEXES == 1\r
+\r
+ portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle pxMutex, portTickType xBlockTime )\r
+ {\r
+ portBASE_TYPE xReturn;\r
+\r
+ configASSERT( pxMutex );\r
+\r
+ /* Comments regarding mutual exclusion as per those within\r
+ xQueueGiveMutexRecursive(). */\r
+\r
+ traceTAKE_MUTEX_RECURSIVE( pxMutex );\r
+\r
+ if( pxMutex->pxMutexHolder == xTaskGetCurrentTaskHandle() )\r
+ {\r
+ ( pxMutex->uxRecursiveCallCount )++;\r
+ xReturn = pdPASS;\r
+ }\r
+ else\r
+ {\r
+ xReturn = xQueueGenericReceive( pxMutex, NULL, xBlockTime, pdFALSE );\r
+\r
+ /* pdPASS will only be returned if we successfully obtained the mutex,\r
+ we may have blocked to reach here. */\r
+ if( xReturn == pdPASS )\r
+ {\r
+ ( pxMutex->uxRecursiveCallCount )++;\r
+ }\r
+ else\r
+ {\r
+ traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex );\r
+ }\r
+ }\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif /* configUSE_RECURSIVE_MUTEXES */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_COUNTING_SEMAPHORES == 1\r
+\r
+ xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount )\r
+ {\r
+ xQueueHandle pxHandle;\r
+\r
+ pxHandle = xQueueGenericCreate( ( unsigned portBASE_TYPE ) uxCountValue, queueSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_COUNTING_SEMAPHORE );\r
+\r
+ if( pxHandle != NULL )\r
+ {\r
+ pxHandle->uxMessagesWaiting = uxInitialCount;\r
+\r
+ traceCREATE_COUNTING_SEMAPHORE();\r
+ }\r
+ else\r
+ {\r
+ traceCREATE_COUNTING_SEMAPHORE_FAILED();\r
+ }\r
+\r
+ configASSERT( pxHandle );\r
+ return pxHandle;\r
+ }\r
+\r
+#endif /* configUSE_COUNTING_SEMAPHORES */\r
+/*-----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xQueueGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition )\r
+{\r
+signed portBASE_TYPE xEntryTimeSet = pdFALSE;\r
+xTimeOutType xTimeOut;\r
+\r
+ configASSERT( pxQueue );\r
+ configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
+\r
+ /* This function relaxes the coding standard somewhat to allow return\r
+ statements within the function itself. This is done in the interest\r
+ of execution time efficiency. */\r
+ for( ;; )\r
+ {\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* Is there room on the queue now? To be running we must be\r
+ the highest priority task wanting to access the queue. */\r
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
+ {\r
+ traceQUEUE_SEND( pxQueue );\r
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );\r
+\r
+ /* If there was a task waiting for data to arrive on the\r
+ queue then unblock it now. */\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
+ {\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) == pdTRUE )\r
+ {\r
+ /* The unblocked task has a priority higher than\r
+ our own so yield immediately. Yes it is ok to do\r
+ this from within the critical section - the kernel\r
+ takes care of that. */\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+\r
+ taskEXIT_CRITICAL();\r
+\r
+ /* Return to the original privilege level before exiting the\r
+ function. */\r
+ return pdPASS;\r
+ }\r
+ else\r
+ {\r
+ if( xTicksToWait == ( portTickType ) 0 )\r
+ {\r
+ /* The queue was full and no block time is specified (or\r
+ the block time has expired) so leave now. */\r
+ taskEXIT_CRITICAL();\r
+\r
+ /* Return to the original privilege level before exiting\r
+ the function. */\r
+ traceQUEUE_SEND_FAILED( pxQueue );\r
+ return errQUEUE_FULL;\r
+ }\r
+ else if( xEntryTimeSet == pdFALSE )\r
+ {\r
+ /* The queue was full and a block time was specified so\r
+ configure the timeout structure. */\r
+ vTaskSetTimeOutState( &xTimeOut );\r
+ xEntryTimeSet = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ /* Interrupts and other tasks can send to and receive from the queue\r
+ now the critical section has been exited. */\r
+\r
+ vTaskSuspendAll();\r
+ prvLockQueue( pxQueue );\r
+\r
+ /* Update the timeout state to see if it has expired yet. */\r
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )\r
+ {\r
+ if( prvIsQueueFull( pxQueue ) != pdFALSE )\r
+ {\r
+ traceBLOCKING_ON_QUEUE_SEND( pxQueue );\r
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );\r
+\r
+ /* Unlocking the queue means queue events can effect the\r
+ event list. It is possible that interrupts occurring now\r
+ remove this task from the event list again - but as the\r
+ scheduler is suspended the task will go onto the pending\r
+ ready last instead of the actual ready list. */\r
+ prvUnlockQueue( pxQueue );\r
+\r
+ /* Resuming the scheduler will move tasks from the pending\r
+ ready list into the ready list - so it is feasible that this\r
+ task is already in a ready list before it yields - in which\r
+ case the yield will not cause a context switch unless there\r
+ is also a higher priority task in the pending ready list. */\r
+ if( xTaskResumeAll() == pdFALSE )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* Try again. */\r
+ prvUnlockQueue( pxQueue );\r
+ ( void ) xTaskResumeAll();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* The timeout has expired. */\r
+ prvUnlockQueue( pxQueue );\r
+ ( void ) xTaskResumeAll();\r
+\r
+ /* Return to the original privilege level before exiting the\r
+ function. */\r
+ traceQUEUE_SEND_FAILED( pxQueue );\r
+ return errQUEUE_FULL;\r
+ }\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_ALTERNATIVE_API == 1\r
+\r
+ signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition )\r
+ {\r
+ signed portBASE_TYPE xEntryTimeSet = pdFALSE;\r
+ xTimeOutType xTimeOut;\r
+\r
+ configASSERT( pxQueue );\r
+ configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
+\r
+ for( ;; )\r
+ {\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* Is there room on the queue now? To be running we must be\r
+ the highest priority task wanting to access the queue. */\r
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
+ {\r
+ traceQUEUE_SEND( pxQueue );\r
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );\r
+\r
+ /* If there was a task waiting for data to arrive on the\r
+ queue then unblock it now. */\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
+ {\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) == pdTRUE )\r
+ {\r
+ /* The unblocked task has a priority higher than\r
+ our own so yield immediately. */\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+\r
+ taskEXIT_CRITICAL();\r
+ return pdPASS;\r
+ }\r
+ else\r
+ {\r
+ if( xTicksToWait == ( portTickType ) 0 )\r
+ {\r
+ taskEXIT_CRITICAL();\r
+ return errQUEUE_FULL;\r
+ }\r
+ else if( xEntryTimeSet == pdFALSE )\r
+ {\r
+ vTaskSetTimeOutState( &xTimeOut );\r
+ xEntryTimeSet = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )\r
+ {\r
+ if( prvIsQueueFull( pxQueue ) != pdFALSE )\r
+ {\r
+ traceBLOCKING_ON_QUEUE_SEND( pxQueue );\r
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ taskEXIT_CRITICAL();\r
+ traceQUEUE_SEND_FAILED( pxQueue );\r
+ return errQUEUE_FULL;\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+ }\r
+ }\r
+\r
+#endif /* configUSE_ALTERNATIVE_API */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_ALTERNATIVE_API == 1\r
+\r
+ signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking )\r
+ {\r
+ signed portBASE_TYPE xEntryTimeSet = pdFALSE;\r
+ xTimeOutType xTimeOut;\r
+ signed char *pcOriginalReadPosition;\r
+\r
+ configASSERT( pxQueue );\r
+ configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
+\r
+ for( ;; )\r
+ {\r
+ taskENTER_CRITICAL();\r
+ {\r
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
+ {\r
+ /* Remember our read position in case we are just peeking. */\r
+ pcOriginalReadPosition = pxQueue->pcReadFrom;\r
+\r
+ prvCopyDataFromQueue( pxQueue, pvBuffer );\r
+\r
+ if( xJustPeeking == pdFALSE )\r
+ {\r
+ traceQUEUE_RECEIVE( pxQueue );\r
+\r
+ /* We are actually removing data. */\r
+ --( pxQueue->uxMessagesWaiting );\r
+\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
+ {\r
+ /* Record the information required to implement\r
+ priority inheritance should it become necessary. */\r
+ pxQueue->pxMutexHolder = xTaskGetCurrentTaskHandle();\r
+ }\r
+ }\r
+ #endif\r
+\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
+ {\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+ else\r
+ {\r
+ traceQUEUE_PEEK( pxQueue );\r
+\r
+ /* We are not removing the data, so reset our read\r
+ pointer. */\r
+ pxQueue->pcReadFrom = pcOriginalReadPosition;\r
+\r
+ /* The data is being left in the queue, so see if there are\r
+ any other tasks waiting for the data. */\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
+ {\r
+ /* Tasks that are removed from the event list will get added to\r
+ the pending ready list as the scheduler is still suspended. */\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
+ {\r
+ /* The task waiting has a higher priority than this task. */\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+\r
+ }\r
+\r
+ taskEXIT_CRITICAL();\r
+ return pdPASS;\r
+ }\r
+ else\r
+ {\r
+ if( xTicksToWait == ( portTickType ) 0 )\r
+ {\r
+ taskEXIT_CRITICAL();\r
+ traceQUEUE_RECEIVE_FAILED( pxQueue );\r
+ return errQUEUE_EMPTY;\r
+ }\r
+ else if( xEntryTimeSet == pdFALSE )\r
+ {\r
+ vTaskSetTimeOutState( &xTimeOut );\r
+ xEntryTimeSet = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )\r
+ {\r
+ if( prvIsQueueEmpty( pxQueue ) != pdFALSE )\r
+ {\r
+ traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );\r
+\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
+ {\r
+ portENTER_CRITICAL();\r
+ vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );\r
+ portEXIT_CRITICAL();\r
+ }\r
+ }\r
+ #endif\r
+\r
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ taskEXIT_CRITICAL();\r
+ traceQUEUE_RECEIVE_FAILED( pxQueue );\r
+ return errQUEUE_EMPTY;\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+ }\r
+ }\r
+\r
+\r
+#endif /* configUSE_ALTERNATIVE_API */\r
+/*-----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+unsigned portBASE_TYPE uxSavedInterruptStatus;\r
+\r
+ configASSERT( pxQueue );\r
+ configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
+\r
+ /* Similar to xQueueGenericSend, except we don't block if there is no room\r
+ in the queue. Also we don't directly wake a task that was blocked on a\r
+ queue read, instead we return a flag to say whether a context switch is\r
+ required or not (i.e. has a task with a higher priority than us been woken\r
+ by this post). */\r
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
+ {\r
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
+ {\r
+ traceQUEUE_SEND_FROM_ISR( pxQueue );\r
+\r
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );\r
+\r
+ /* If the queue is locked we do not alter the event list. This will\r
+ be done when the queue is unlocked later. */\r
+ if( pxQueue->xTxLock == queueUNLOCKED )\r
+ {\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
+ {\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
+ {\r
+ /* The task waiting has a higher priority so record that a\r
+ context switch is required. */\r
+ if( pxHigherPriorityTaskWoken != NULL )\r
+ {\r
+ *pxHigherPriorityTaskWoken = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* Increment the lock count so the task that unlocks the queue\r
+ knows that data was posted while it was locked. */\r
+ ++( pxQueue->xTxLock );\r
+ }\r
+\r
+ xReturn = pdPASS;\r
+ }\r
+ else\r
+ {\r
+ traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );\r
+ xReturn = errQUEUE_FULL;\r
+ }\r
+ }\r
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xQueueGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking )\r
+{\r
+signed portBASE_TYPE xEntryTimeSet = pdFALSE;\r
+xTimeOutType xTimeOut;\r
+signed char *pcOriginalReadPosition;\r
+\r
+ configASSERT( pxQueue );\r
+ configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
+\r
+ /* This function relaxes the coding standard somewhat to allow return\r
+ statements within the function itself. This is done in the interest\r
+ of execution time efficiency. */\r
+\r
+ for( ;; )\r
+ {\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* Is there data in the queue now? To be running we must be\r
+ the highest priority task wanting to access the queue. */\r
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
+ {\r
+ /* Remember our read position in case we are just peeking. */\r
+ pcOriginalReadPosition = pxQueue->pcReadFrom;\r
+\r
+ prvCopyDataFromQueue( pxQueue, pvBuffer );\r
+\r
+ if( xJustPeeking == pdFALSE )\r
+ {\r
+ traceQUEUE_RECEIVE( pxQueue );\r
+\r
+ /* We are actually removing data. */\r
+ --( pxQueue->uxMessagesWaiting );\r
+\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
+ {\r
+ /* Record the information required to implement\r
+ priority inheritance should it become necessary. */\r
+ pxQueue->pxMutexHolder = xTaskGetCurrentTaskHandle();\r
+ }\r
+ }\r
+ #endif\r
+\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
+ {\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+ else\r
+ {\r
+ traceQUEUE_PEEK( pxQueue );\r
+\r
+ /* We are not removing the data, so reset our read\r
+ pointer. */\r
+ pxQueue->pcReadFrom = pcOriginalReadPosition;\r
+\r
+ /* The data is being left in the queue, so see if there are\r
+ any other tasks waiting for the data. */\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
+ {\r
+ /* Tasks that are removed from the event list will get added to\r
+ the pending ready list as the scheduler is still suspended. */\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
+ {\r
+ /* The task waiting has a higher priority than this task. */\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+\r
+ taskEXIT_CRITICAL();\r
+ return pdPASS;\r
+ }\r
+ else\r
+ {\r
+ if( xTicksToWait == ( portTickType ) 0 )\r
+ {\r
+ /* The queue was empty and no block time is specified (or\r
+ the block time has expired) so leave now. */\r
+ taskEXIT_CRITICAL();\r
+ traceQUEUE_RECEIVE_FAILED( pxQueue );\r
+ return errQUEUE_EMPTY;\r
+ }\r
+ else if( xEntryTimeSet == pdFALSE )\r
+ {\r
+ /* The queue was empty and a block time was specified so\r
+ configure the timeout structure. */\r
+ vTaskSetTimeOutState( &xTimeOut );\r
+ xEntryTimeSet = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ /* Interrupts and other tasks can send to and receive from the queue\r
+ now the critical section has been exited. */\r
+\r
+ vTaskSuspendAll();\r
+ prvLockQueue( pxQueue );\r
+\r
+ /* Update the timeout state to see if it has expired yet. */\r
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )\r
+ {\r
+ if( prvIsQueueEmpty( pxQueue ) != pdFALSE )\r
+ {\r
+ traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );\r
+\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
+ {\r
+ portENTER_CRITICAL();\r
+ {\r
+ vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );\r
+ }\r
+ portEXIT_CRITICAL();\r
+ }\r
+ }\r
+ #endif\r
+\r
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );\r
+ prvUnlockQueue( pxQueue );\r
+ if( xTaskResumeAll() == pdFALSE )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* Try again. */\r
+ prvUnlockQueue( pxQueue );\r
+ ( void ) xTaskResumeAll();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ prvUnlockQueue( pxQueue );\r
+ ( void ) xTaskResumeAll();\r
+ traceQUEUE_RECEIVE_FAILED( pxQueue );\r
+ return errQUEUE_EMPTY;\r
+ }\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxHigherPriorityTaskWoken )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+unsigned portBASE_TYPE uxSavedInterruptStatus;\r
+\r
+ configASSERT( pxQueue );\r
+ configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( unsigned portBASE_TYPE ) 0U ) ) );\r
+\r
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
+ {\r
+ /* We cannot block from an ISR, so check there is data available. */\r
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
+ {\r
+ traceQUEUE_RECEIVE_FROM_ISR( pxQueue );\r
+\r
+ prvCopyDataFromQueue( pxQueue, pvBuffer );\r
+ --( pxQueue->uxMessagesWaiting );\r
+\r
+ /* If the queue is locked we will not modify the event list. Instead\r
+ we update the lock count so the task that unlocks the queue will know\r
+ that an ISR has removed data while the queue was locked. */\r
+ if( pxQueue->xRxLock == queueUNLOCKED )\r
+ {\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
+ {\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )\r
+ {\r
+ /* The task waiting has a higher priority than us so\r
+ force a context switch. */\r
+ if( pxHigherPriorityTaskWoken != NULL )\r
+ {\r
+ *pxHigherPriorityTaskWoken = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* Increment the lock count so the task that unlocks the queue\r
+ knows that data was removed while it was locked. */\r
+ ++( pxQueue->xRxLock );\r
+ }\r
+\r
+ xReturn = pdPASS;\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdFAIL;\r
+ traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue );\r
+ }\r
+ }\r
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle pxQueue )\r
+{\r
+unsigned portBASE_TYPE uxReturn;\r
+\r
+ configASSERT( pxQueue );\r
+\r
+ taskENTER_CRITICAL();\r
+ uxReturn = pxQueue->uxMessagesWaiting;\r
+ taskEXIT_CRITICAL();\r
+\r
+ return uxReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue )\r
+{\r
+unsigned portBASE_TYPE uxReturn;\r
+\r
+ configASSERT( pxQueue );\r
+\r
+ uxReturn = pxQueue->uxMessagesWaiting;\r
+\r
+ return uxReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vQueueDelete( xQueueHandle pxQueue )\r
+{\r
+ configASSERT( pxQueue );\r
+\r
+ traceQUEUE_DELETE( pxQueue );\r
+ vQueueUnregisterQueue( pxQueue );\r
+ vPortFree( pxQueue->pcHead );\r
+ vPortFree( pxQueue );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_TRACE_FACILITY == 1 )\r
+\r
+ unsigned char ucQueueGetQueueNumber( xQueueHandle pxQueue )\r
+ {\r
+ return pxQueue->ucQueueNumber;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_TRACE_FACILITY == 1 )\r
+\r
+ void vQueueSetQueueNumber( xQueueHandle pxQueue, unsigned char ucQueueNumber )\r
+ {\r
+ pxQueue->ucQueueNumber = ucQueueNumber;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_TRACE_FACILITY == 1 )\r
+\r
+ unsigned char ucQueueGetQueueType( xQueueHandle pxQueue )\r
+ {\r
+ return pxQueue->ucQueueType;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvCopyDataToQueue( xQUEUE *pxQueue, const void *pvItemToQueue, portBASE_TYPE xPosition )\r
+{\r
+ if( pxQueue->uxItemSize == ( unsigned portBASE_TYPE ) 0 )\r
+ {\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )\r
+ {\r
+ /* The mutex is no longer being held. */\r
+ vTaskPriorityDisinherit( ( void * ) pxQueue->pxMutexHolder );\r
+ pxQueue->pxMutexHolder = NULL;\r
+ }\r
+ }\r
+ #endif\r
+ }\r
+ else if( xPosition == queueSEND_TO_BACK )\r
+ {\r
+ memcpy( ( void * ) pxQueue->pcWriteTo, pvItemToQueue, ( unsigned ) pxQueue->uxItemSize );\r
+ pxQueue->pcWriteTo += pxQueue->uxItemSize;\r
+ if( pxQueue->pcWriteTo >= pxQueue->pcTail )\r
+ {\r
+ pxQueue->pcWriteTo = pxQueue->pcHead;\r
+ }\r
+ }\r
+ else\r
+ {\r
+ memcpy( ( void * ) pxQueue->pcReadFrom, pvItemToQueue, ( unsigned ) pxQueue->uxItemSize );\r
+ pxQueue->pcReadFrom -= pxQueue->uxItemSize;\r
+ if( pxQueue->pcReadFrom < pxQueue->pcHead )\r
+ {\r
+ pxQueue->pcReadFrom = ( pxQueue->pcTail - pxQueue->uxItemSize );\r
+ }\r
+ }\r
+\r
+ ++( pxQueue->uxMessagesWaiting );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvCopyDataFromQueue( xQUEUE * const pxQueue, const void *pvBuffer )\r
+{\r
+ if( pxQueue->uxQueueType != queueQUEUE_IS_MUTEX )\r
+ {\r
+ pxQueue->pcReadFrom += pxQueue->uxItemSize;\r
+ if( pxQueue->pcReadFrom >= pxQueue->pcTail )\r
+ {\r
+ pxQueue->pcReadFrom = pxQueue->pcHead;\r
+ }\r
+ memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvUnlockQueue( xQueueHandle pxQueue )\r
+{\r
+ /* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. */\r
+\r
+ /* The lock counts contains the number of extra data items placed or\r
+ removed from the queue while the queue was locked. When a queue is\r
+ locked items can be added or removed, but the event lists cannot be\r
+ updated. */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* See if data was added to the queue while it was locked. */\r
+ while( pxQueue->xTxLock > queueLOCKED_UNMODIFIED )\r
+ {\r
+ /* Data was posted while the queue was locked. Are any tasks\r
+ blocked waiting for data to become available? */\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
+ {\r
+ /* Tasks that are removed from the event list will get added to\r
+ the pending ready list as the scheduler is still suspended. */\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
+ {\r
+ /* The task waiting has a higher priority so record that a\r
+ context switch is required. */\r
+ vTaskMissedYield();\r
+ }\r
+\r
+ --( pxQueue->xTxLock );\r
+ }\r
+ else\r
+ {\r
+ break;\r
+ }\r
+ }\r
+\r
+ pxQueue->xTxLock = queueUNLOCKED;\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ /* Do the same for the Rx lock. */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ while( pxQueue->xRxLock > queueLOCKED_UNMODIFIED )\r
+ {\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
+ {\r
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )\r
+ {\r
+ vTaskMissedYield();\r
+ }\r
+\r
+ --( pxQueue->xRxLock );\r
+ }\r
+ else\r
+ {\r
+ break;\r
+ }\r
+ }\r
+\r
+ pxQueue->xRxLock = queueUNLOCKED;\r
+ }\r
+ taskEXIT_CRITICAL();\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static signed portBASE_TYPE prvIsQueueEmpty( const xQueueHandle pxQueue )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+\r
+ taskENTER_CRITICAL();\r
+ xReturn = ( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 );\r
+ taskEXIT_CRITICAL();\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+\r
+ configASSERT( pxQueue );\r
+ xReturn = ( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 );\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static signed portBASE_TYPE prvIsQueueFull( const xQueueHandle pxQueue )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+\r
+ taskENTER_CRITICAL();\r
+ xReturn = ( pxQueue->uxMessagesWaiting == pxQueue->uxLength );\r
+ taskEXIT_CRITICAL();\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+\r
+ configASSERT( pxQueue );\r
+ xReturn = ( pxQueue->uxMessagesWaiting == pxQueue->uxLength );\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_CO_ROUTINES == 1\r
+signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+\r
+ /* If the queue is already full we may have to block. A critical section\r
+ is required to prevent an interrupt removing something from the queue\r
+ between the check to see if the queue is full and blocking on the queue. */\r
+ portDISABLE_INTERRUPTS();\r
+ {\r
+ if( prvIsQueueFull( pxQueue ) != pdFALSE )\r
+ {\r
+ /* The queue is full - do we want to block or just leave without\r
+ posting? */\r
+ if( xTicksToWait > ( portTickType ) 0 )\r
+ {\r
+ /* As this is called from a coroutine we cannot block directly, but\r
+ return indicating that we need to block. */\r
+ vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToSend ) );\r
+ portENABLE_INTERRUPTS();\r
+ return errQUEUE_BLOCKED;\r
+ }\r
+ else\r
+ {\r
+ portENABLE_INTERRUPTS();\r
+ return errQUEUE_FULL;\r
+ }\r
+ }\r
+ }\r
+ portENABLE_INTERRUPTS();\r
+\r
+ portNOP();\r
+\r
+ portDISABLE_INTERRUPTS();\r
+ {\r
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
+ {\r
+ /* There is room in the queue, copy the data into the queue. */\r
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );\r
+ xReturn = pdPASS;\r
+\r
+ /* Were any co-routines waiting for data to become available? */\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
+ {\r
+ /* In this instance the co-routine could be placed directly\r
+ into the ready list as we are within a critical section.\r
+ Instead the same pending ready list mechanism is used as if\r
+ the event were caused from within an interrupt. */\r
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
+ {\r
+ /* The co-routine waiting has a higher priority so record\r
+ that a yield might be appropriate. */\r
+ xReturn = errQUEUE_YIELD;\r
+ }\r
+ }\r
+ }\r
+ else\r
+ {\r
+ xReturn = errQUEUE_FULL;\r
+ }\r
+ }\r
+ portENABLE_INTERRUPTS();\r
+\r
+ return xReturn;\r
+}\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_CO_ROUTINES == 1\r
+signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+\r
+ /* If the queue is already empty we may have to block. A critical section\r
+ is required to prevent an interrupt adding something to the queue\r
+ between the check to see if the queue is empty and blocking on the queue. */\r
+ portDISABLE_INTERRUPTS();\r
+ {\r
+ if( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 )\r
+ {\r
+ /* There are no messages in the queue, do we want to block or just\r
+ leave with nothing? */\r
+ if( xTicksToWait > ( portTickType ) 0 )\r
+ {\r
+ /* As this is a co-routine we cannot block directly, but return\r
+ indicating that we need to block. */\r
+ vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToReceive ) );\r
+ portENABLE_INTERRUPTS();\r
+ return errQUEUE_BLOCKED;\r
+ }\r
+ else\r
+ {\r
+ portENABLE_INTERRUPTS();\r
+ return errQUEUE_FULL;\r
+ }\r
+ }\r
+ }\r
+ portENABLE_INTERRUPTS();\r
+\r
+ portNOP();\r
+\r
+ portDISABLE_INTERRUPTS();\r
+ {\r
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
+ {\r
+ /* Data is available from the queue. */\r
+ pxQueue->pcReadFrom += pxQueue->uxItemSize;\r
+ if( pxQueue->pcReadFrom >= pxQueue->pcTail )\r
+ {\r
+ pxQueue->pcReadFrom = pxQueue->pcHead;\r
+ }\r
+ --( pxQueue->uxMessagesWaiting );\r
+ memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );\r
+\r
+ xReturn = pdPASS;\r
+\r
+ /* Were any co-routines waiting for space to become available? */\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
+ {\r
+ /* In this instance the co-routine could be placed directly\r
+ into the ready list as we are within a critical section.\r
+ Instead the same pending ready list mechanism is used as if\r
+ the event were caused from within an interrupt. */\r
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )\r
+ {\r
+ xReturn = errQUEUE_YIELD;\r
+ }\r
+ }\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdFAIL;\r
+ }\r
+ }\r
+ portENABLE_INTERRUPTS();\r
+\r
+ return xReturn;\r
+}\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+\r
+\r
+#if configUSE_CO_ROUTINES == 1\r
+signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken )\r
+{\r
+ /* Cannot block within an ISR so if there is no space on the queue then\r
+ exit without doing anything. */\r
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )\r
+ {\r
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );\r
+\r
+ /* We only want to wake one co-routine per ISR, so check that a\r
+ co-routine has not already been woken. */\r
+ if( xCoRoutinePreviouslyWoken == pdFALSE )\r
+ {\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )\r
+ {\r
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )\r
+ {\r
+ return pdTRUE;\r
+ }\r
+ }\r
+ }\r
+ }\r
+\r
+ return xCoRoutinePreviouslyWoken;\r
+}\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_CO_ROUTINES == 1\r
+signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxCoRoutineWoken )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+\r
+ /* We cannot block from an ISR, so check there is data available. If\r
+ not then just leave without doing anything. */\r
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )\r
+ {\r
+ /* Copy the data from the queue. */\r
+ pxQueue->pcReadFrom += pxQueue->uxItemSize;\r
+ if( pxQueue->pcReadFrom >= pxQueue->pcTail )\r
+ {\r
+ pxQueue->pcReadFrom = pxQueue->pcHead;\r
+ }\r
+ --( pxQueue->uxMessagesWaiting );\r
+ memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );\r
+\r
+ if( ( *pxCoRoutineWoken ) == pdFALSE )\r
+ {\r
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )\r
+ {\r
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )\r
+ {\r
+ *pxCoRoutineWoken = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+\r
+ xReturn = pdPASS;\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdFAIL;\r
+ }\r
+\r
+ return xReturn;\r
+}\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configQUEUE_REGISTRY_SIZE > 0\r
+\r
+ void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcQueueName )\r
+ {\r
+ unsigned portBASE_TYPE ux;\r
+\r
+ /* See if there is an empty space in the registry. A NULL name denotes\r
+ a free slot. */\r
+ for( ux = ( unsigned portBASE_TYPE ) 0U; ux < ( unsigned portBASE_TYPE ) configQUEUE_REGISTRY_SIZE; ux++ )\r
+ {\r
+ if( xQueueRegistry[ ux ].pcQueueName == NULL )\r
+ {\r
+ /* Store the information on this queue. */\r
+ xQueueRegistry[ ux ].pcQueueName = pcQueueName;\r
+ xQueueRegistry[ ux ].xHandle = xQueue;\r
+ break;\r
+ }\r
+ }\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configQUEUE_REGISTRY_SIZE > 0\r
+\r
+ static void vQueueUnregisterQueue( xQueueHandle xQueue )\r
+ {\r
+ unsigned portBASE_TYPE ux;\r
+\r
+ /* See if the handle of the queue being unregistered in actually in the\r
+ registry. */\r
+ for( ux = ( unsigned portBASE_TYPE ) 0U; ux < ( unsigned portBASE_TYPE ) configQUEUE_REGISTRY_SIZE; ux++ )\r
+ {\r
+ if( xQueueRegistry[ ux ].xHandle == xQueue )\r
+ {\r
+ /* Set the name to NULL to show that this slot if free again. */\r
+ xQueueRegistry[ ux ].pcQueueName = NULL;\r
+ break;\r
+ }\r
+ }\r
+\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_TIMERS == 1\r
+\r
+ void vQueueWaitForMessageRestricted( xQueueHandle pxQueue, portTickType xTicksToWait )\r
+ {\r
+ /* This function should not be called by application code hence the\r
+ 'Restricted' in its name. It is not part of the public API. It is\r
+ designed for use by kernel code, and has special calling requirements.\r
+ It can result in vListInsert() being called on a list that can only\r
+ possibly ever have one item in it, so the list will be fast, but even\r
+ so it should be called with the scheduler locked and not from a critical\r
+ section. */\r
+\r
+ /* Only do anything if there are no messages in the queue. This function\r
+ will not actually cause the task to block, just place it on a blocked\r
+ list. It will not block until the scheduler is unlocked - at which\r
+ time a yield will be performed. If an item is added to the queue while\r
+ the queue is locked, and the calling task blocks on the queue, then the\r
+ calling task will be immediately unblocked when the queue is unlocked. */\r
+ prvLockQueue( pxQueue );\r
+ if( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0U )\r
+ {\r
+ /* There is nothing in the queue, block for the specified period. */\r
+ vTaskPlaceOnEventListRestricted( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );\r
+ }\r
+ prvUnlockQueue( pxQueue );\r
+ }\r
+\r
+#endif\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+ \r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+\r
+#include <stdio.h>\r
+#include <stdlib.h>\r
+#include <string.h>\r
+\r
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining\r
+all the API functions to use the MPU wrappers. That should only be done when\r
+task.h is included from an application file. */\r
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+#include "FreeRTOS.h"\r
+#include "task.h"\r
+#include "timers.h"\r
+#include "StackMacros.h"\r
+\r
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+/*\r
+ * Macro to define the amount of stack available to the idle task.\r
+ */\r
+#define tskIDLE_STACK_SIZE configMINIMAL_STACK_SIZE\r
+\r
+/*\r
+ * Task control block. A task control block (TCB) is allocated to each task,\r
+ * and stores the context of the task.\r
+ */\r
+typedef struct tskTaskControlBlock\r
+{\r
+ volatile portSTACK_TYPE *pxTopOfStack; /*< Points to the location of the last item placed on the tasks stack. THIS MUST BE THE FIRST MEMBER OF THE STRUCT. */\r
+\r
+ #if ( portUSING_MPU_WRAPPERS == 1 )\r
+ xMPU_SETTINGS xMPUSettings; /*< The MPU settings are defined as part of the port layer. THIS MUST BE THE SECOND MEMBER OF THE STRUCT. */\r
+ #endif \r
+ \r
+ xListItem xGenericListItem; /*< List item used to place the TCB in ready and blocked queues. */\r
+ xListItem xEventListItem; /*< List item used to place the TCB in event lists. */\r
+ unsigned portBASE_TYPE uxPriority; /*< The priority of the task where 0 is the lowest priority. */\r
+ portSTACK_TYPE *pxStack; /*< Points to the start of the stack. */\r
+ signed char pcTaskName[ configMAX_TASK_NAME_LEN ];/*< Descriptive name given to the task when created. Facilitates debugging only. */\r
+\r
+ #if ( portSTACK_GROWTH > 0 )\r
+ portSTACK_TYPE *pxEndOfStack; /*< Used for stack overflow checking on architectures where the stack grows up from low memory. */\r
+ #endif\r
+\r
+ #if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
+ unsigned portBASE_TYPE uxCriticalNesting;\r
+ #endif\r
+\r
+ #if ( configUSE_TRACE_FACILITY == 1 )\r
+ unsigned portBASE_TYPE uxTCBNumber; /*< This stores a number that increments each time a TCB is created. It allows debuggers to determine when a task has been deleted and then recreated. */\r
+ unsigned portBASE_TYPE uxTaskNumber; /*< This stores a number specifically for use by third party trace code. */\r
+ #endif\r
+\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ unsigned portBASE_TYPE uxBasePriority; /*< The priority last assigned to the task - used by the priority inheritance mechanism. */\r
+ #endif\r
+\r
+ #if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
+ pdTASK_HOOK_CODE pxTaskTag;\r
+ #endif\r
+\r
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+ unsigned long ulRunTimeCounter; /*< Used for calculating how much CPU time each task is utilising. */\r
+ #endif\r
+\r
+} tskTCB;\r
+\r
+\r
+/*\r
+ * Some kernel aware debuggers require data to be viewed to be global, rather\r
+ * than file scope.\r
+ */\r
+#ifdef portREMOVE_STATIC_QUALIFIER\r
+ #define static\r
+#endif\r
+\r
+/*lint -e956 */\r
+PRIVILEGED_DATA tskTCB * volatile pxCurrentTCB = NULL;\r
+\r
+/* Lists for ready and blocked tasks. --------------------*/\r
+\r
+PRIVILEGED_DATA static xList pxReadyTasksLists[ configMAX_PRIORITIES ]; /*< Prioritised ready tasks. */\r
+PRIVILEGED_DATA static xList xDelayedTaskList1; /*< Delayed tasks. */\r
+PRIVILEGED_DATA static xList xDelayedTaskList2; /*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */\r
+PRIVILEGED_DATA static xList * volatile pxDelayedTaskList ; /*< Points to the delayed task list currently being used. */\r
+PRIVILEGED_DATA static xList * volatile pxOverflowDelayedTaskList; /*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */\r
+PRIVILEGED_DATA static xList xPendingReadyList; /*< Tasks that have been readied while the scheduler was suspended. They will be moved to the ready queue when the scheduler is resumed. */\r
+\r
+#if ( INCLUDE_vTaskDelete == 1 )\r
+\r
+ PRIVILEGED_DATA static xList xTasksWaitingTermination; /*< Tasks that have been deleted - but the their memory not yet freed. */\r
+ PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxTasksDeleted = ( unsigned portBASE_TYPE ) 0U;\r
+\r
+#endif\r
+\r
+#if ( INCLUDE_vTaskSuspend == 1 )\r
+\r
+ PRIVILEGED_DATA static xList xSuspendedTaskList; /*< Tasks that are currently suspended. */\r
+\r
+#endif\r
+\r
+#if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )\r
+ \r
+ PRIVILEGED_DATA static xTaskHandle xIdleTaskHandle = NULL;\r
+ \r
+#endif\r
+\r
+/* File private variables. --------------------------------*/\r
+PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxCurrentNumberOfTasks = ( unsigned portBASE_TYPE ) 0U;\r
+PRIVILEGED_DATA static volatile portTickType xTickCount = ( portTickType ) 0U;\r
+PRIVILEGED_DATA static unsigned portBASE_TYPE uxTopUsedPriority = tskIDLE_PRIORITY;\r
+PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxTopReadyPriority = tskIDLE_PRIORITY;\r
+PRIVILEGED_DATA static volatile signed portBASE_TYPE xSchedulerRunning = pdFALSE;\r
+PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxSchedulerSuspended = ( unsigned portBASE_TYPE ) pdFALSE;\r
+PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxMissedTicks = ( unsigned portBASE_TYPE ) 0U;\r
+PRIVILEGED_DATA static volatile portBASE_TYPE xMissedYield = ( portBASE_TYPE ) pdFALSE;\r
+PRIVILEGED_DATA static volatile portBASE_TYPE xNumOfOverflows = ( portBASE_TYPE ) 0;\r
+PRIVILEGED_DATA static unsigned portBASE_TYPE uxTaskNumber = ( unsigned portBASE_TYPE ) 0U;\r
+PRIVILEGED_DATA static portTickType xNextTaskUnblockTime = ( portTickType ) portMAX_DELAY;\r
+\r
+#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+\r
+ PRIVILEGED_DATA static char pcStatsString[ 50 ] ;\r
+ PRIVILEGED_DATA static unsigned long ulTaskSwitchedInTime = 0UL; /*< Holds the value of a timer/counter the last time a task was switched in. */\r
+ static void prvGenerateRunTimeStatsForTasksInList( const signed char *pcWriteBuffer, xList *pxList, unsigned long ulTotalRunTime ) PRIVILEGED_FUNCTION;\r
+\r
+#endif\r
+\r
+/* Debugging and trace facilities private variables and macros. ------------*/\r
+\r
+/*\r
+ * The value used to fill the stack of a task when the task is created. This\r
+ * is used purely for checking the high water mark for tasks.\r
+ */\r
+#define tskSTACK_FILL_BYTE ( 0xa5U )\r
+\r
+/*\r
+ * Macros used by vListTask to indicate which state a task is in.\r
+ */\r
+#define tskBLOCKED_CHAR ( ( signed char ) 'B' )\r
+#define tskREADY_CHAR ( ( signed char ) 'R' )\r
+#define tskDELETED_CHAR ( ( signed char ) 'D' )\r
+#define tskSUSPENDED_CHAR ( ( signed char ) 'S' )\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * Place the task represented by pxTCB into the appropriate ready queue for\r
+ * the task. It is inserted at the end of the list. One quirk of this is\r
+ * that if the task being inserted is at the same priority as the currently\r
+ * executing task, then it will only be rescheduled after the currently\r
+ * executing task has been rescheduled.\r
+ */\r
+#define prvAddTaskToReadyQueue( pxTCB ) \\r
+ traceMOVED_TASK_TO_READY_STATE( pxTCB ) \\r
+ if( ( pxTCB )->uxPriority > uxTopReadyPriority ) \\r
+ { \\r
+ uxTopReadyPriority = ( pxTCB )->uxPriority; \\r
+ } \\r
+ vListInsertEnd( ( xList * ) &( pxReadyTasksLists[ ( pxTCB )->uxPriority ] ), &( ( pxTCB )->xGenericListItem ) )\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * Macro that looks at the list of tasks that are currently delayed to see if\r
+ * any require waking.\r
+ *\r
+ * Tasks are stored in the queue in the order of their wake time - meaning\r
+ * once one tasks has been found whose timer has not expired we need not look\r
+ * any further down the list.\r
+ */\r
+#define prvCheckDelayedTasks() \\r
+{ \\r
+portTickType xItemValue; \\r
+ \\r
+ /* Is the tick count greater than or equal to the wake time of the first \\r
+ task referenced from the delayed tasks list? */ \\r
+ if( xTickCount >= xNextTaskUnblockTime ) \\r
+ { \\r
+ for( ;; ) \\r
+ { \\r
+ if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE ) \\r
+ { \\r
+ /* The delayed list is empty. Set xNextTaskUnblockTime to the \\r
+ maximum possible value so it is extremely unlikely that the \\r
+ if( xTickCount >= xNextTaskUnblockTime ) test will pass next \\r
+ time through. */ \\r
+ xNextTaskUnblockTime = portMAX_DELAY; \\r
+ break; \\r
+ } \\r
+ else \\r
+ { \\r
+ /* The delayed list is not empty, get the value of the item at \\r
+ the head of the delayed list. This is the time at which the \\r
+ task at the head of the delayed list should be removed from \\r
+ the Blocked state. */ \\r
+ pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList ); \\r
+ xItemValue = listGET_LIST_ITEM_VALUE( &( pxTCB->xGenericListItem ) ); \\r
+ \\r
+ if( xTickCount < xItemValue ) \\r
+ { \\r
+ /* It is not time to unblock this item yet, but the item \\r
+ value is the time at which the task at the head of the \\r
+ blocked list should be removed from the Blocked state - \\r
+ so record the item value in xNextTaskUnblockTime. */ \\r
+ xNextTaskUnblockTime = xItemValue; \\r
+ break; \\r
+ } \\r
+ \\r
+ /* It is time to remove the item from the Blocked state. */ \\r
+ vListRemove( &( pxTCB->xGenericListItem ) ); \\r
+ \\r
+ /* Is the task waiting on an event also? */ \\r
+ if( pxTCB->xEventListItem.pvContainer != NULL ) \\r
+ { \\r
+ vListRemove( &( pxTCB->xEventListItem ) ); \\r
+ } \\r
+ prvAddTaskToReadyQueue( pxTCB ); \\r
+ } \\r
+ } \\r
+ } \\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * Several functions take an xTaskHandle parameter that can optionally be NULL,\r
+ * where NULL is used to indicate that the handle of the currently executing\r
+ * task should be used in place of the parameter. This macro simply checks to\r
+ * see if the parameter is NULL and returns a pointer to the appropriate TCB.\r
+ */\r
+#define prvGetTCBFromHandle( pxHandle ) ( ( ( pxHandle ) == NULL ) ? ( tskTCB * ) pxCurrentTCB : ( tskTCB * ) ( pxHandle ) )\r
+\r
+/* Callback function prototypes. --------------------------*/\r
+extern void vApplicationStackOverflowHook( xTaskHandle pxTask, signed char *pcTaskName );\r
+extern void vApplicationTickHook( void );\r
+ \r
+/* File private functions. --------------------------------*/\r
+\r
+/*\r
+ * Utility to ready a TCB for a given task. Mainly just copies the parameters\r
+ * into the TCB structure.\r
+ */\r
+static void prvInitialiseTCBVariables( tskTCB *pxTCB, const signed char * const pcName, unsigned portBASE_TYPE uxPriority, const xMemoryRegion * const xRegions, unsigned short usStackDepth ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Utility to ready all the lists used by the scheduler. This is called\r
+ * automatically upon the creation of the first task.\r
+ */\r
+static void prvInitialiseTaskLists( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * The idle task, which as all tasks is implemented as a never ending loop.\r
+ * The idle task is automatically created and added to the ready lists upon\r
+ * creation of the first user task.\r
+ *\r
+ * The portTASK_FUNCTION_PROTO() macro is used to allow port/compiler specific\r
+ * language extensions. The equivalent prototype for this function is:\r
+ *\r
+ * void prvIdleTask( void *pvParameters );\r
+ *\r
+ */\r
+static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );\r
+\r
+/*\r
+ * Utility to free all memory allocated by the scheduler to hold a TCB,\r
+ * including the stack pointed to by the TCB.\r
+ *\r
+ * This does not free memory allocated by the task itself (i.e. memory\r
+ * allocated by calls to pvPortMalloc from within the tasks application code).\r
+ */\r
+#if ( INCLUDE_vTaskDelete == 1 )\r
+\r
+ static void prvDeleteTCB( tskTCB *pxTCB ) PRIVILEGED_FUNCTION;\r
+\r
+#endif\r
+\r
+/*\r
+ * Used only by the idle task. This checks to see if anything has been placed\r
+ * in the list of tasks waiting to be deleted. If so the task is cleaned up\r
+ * and its TCB deleted.\r
+ */\r
+static void prvCheckTasksWaitingTermination( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * The currently executing task is entering the Blocked state. Add the task to\r
+ * either the current or the overflow delayed task list.\r
+ */\r
+static void prvAddCurrentTaskToDelayedList( portTickType xTimeToWake ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Allocates memory from the heap for a TCB and associated stack. Checks the\r
+ * allocation was successful.\r
+ */\r
+static tskTCB *prvAllocateTCBAndStack( unsigned short usStackDepth, portSTACK_TYPE *puxStackBuffer ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Called from vTaskList. vListTasks details all the tasks currently under\r
+ * control of the scheduler. The tasks may be in one of a number of lists.\r
+ * prvListTaskWithinSingleList accepts a list and details the tasks from\r
+ * within just that list.\r
+ *\r
+ * THIS FUNCTION IS INTENDED FOR DEBUGGING ONLY, AND SHOULD NOT BE CALLED FROM\r
+ * NORMAL APPLICATION CODE.\r
+ */\r
+#if ( configUSE_TRACE_FACILITY == 1 )\r
+\r
+ static void prvListTaskWithinSingleList( const signed char *pcWriteBuffer, xList *pxList, signed char cStatus ) PRIVILEGED_FUNCTION;\r
+\r
+#endif\r
+\r
+/*\r
+ * When a task is created, the stack of the task is filled with a known value.\r
+ * This function determines the 'high water mark' of the task stack by\r
+ * determining how much of the stack remains at the original preset value.\r
+ */\r
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
+\r
+ static unsigned short usTaskCheckFreeStackSpace( const unsigned char * pucStackByte ) PRIVILEGED_FUNCTION;\r
+\r
+#endif\r
+\r
+\r
+/*lint +e956 */\r
+\r
+\r
+\r
+/*-----------------------------------------------------------\r
+ * TASK CREATION API documented in task.h\r
+ *----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xTaskGenericCreate( pdTASK_CODE pxTaskCode, const signed char * const pcName, unsigned short usStackDepth, void *pvParameters, unsigned portBASE_TYPE uxPriority, xTaskHandle *pxCreatedTask, portSTACK_TYPE *puxStackBuffer, const xMemoryRegion * const xRegions )\r
+{\r
+signed portBASE_TYPE xReturn;\r
+tskTCB * pxNewTCB;\r
+\r
+ configASSERT( pxTaskCode );\r
+ configASSERT( ( uxPriority < configMAX_PRIORITIES ) );\r
+\r
+ /* Allocate the memory required by the TCB and stack for the new task,\r
+ checking that the allocation was successful. */\r
+ pxNewTCB = prvAllocateTCBAndStack( usStackDepth, puxStackBuffer );\r
+\r
+ if( pxNewTCB != NULL )\r
+ {\r
+ portSTACK_TYPE *pxTopOfStack;\r
+\r
+ #if( portUSING_MPU_WRAPPERS == 1 )\r
+ /* Should the task be created in privileged mode? */\r
+ portBASE_TYPE xRunPrivileged;\r
+ if( ( uxPriority & portPRIVILEGE_BIT ) != 0U )\r
+ {\r
+ xRunPrivileged = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ xRunPrivileged = pdFALSE;\r
+ }\r
+ uxPriority &= ~portPRIVILEGE_BIT;\r
+ #endif /* portUSING_MPU_WRAPPERS == 1 */\r
+\r
+ /* Calculate the top of stack address. This depends on whether the\r
+ stack grows from high memory to low (as per the 80x86) or visa versa.\r
+ portSTACK_GROWTH is used to make the result positive or negative as\r
+ required by the port. */\r
+ #if( portSTACK_GROWTH < 0 )\r
+ {\r
+ pxTopOfStack = pxNewTCB->pxStack + ( usStackDepth - ( unsigned short ) 1 );\r
+ pxTopOfStack = ( portSTACK_TYPE * ) ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack ) & ( ( portPOINTER_SIZE_TYPE ) ~portBYTE_ALIGNMENT_MASK ) );\r
+\r
+ /* Check the alignment of the calculated top of stack is correct. */\r
+ configASSERT( ( ( ( unsigned long ) pxTopOfStack & ( unsigned long ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
+ }\r
+ #else\r
+ {\r
+ pxTopOfStack = pxNewTCB->pxStack;\r
+ \r
+ /* Check the alignment of the stack buffer is correct. */\r
+ configASSERT( ( ( ( unsigned long ) pxNewTCB->pxStack & ( unsigned long ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
+\r
+ /* If we want to use stack checking on architectures that use\r
+ a positive stack growth direction then we also need to store the\r
+ other extreme of the stack space. */\r
+ pxNewTCB->pxEndOfStack = pxNewTCB->pxStack + ( usStackDepth - 1 );\r
+ }\r
+ #endif\r
+\r
+ /* Setup the newly allocated TCB with the initial state of the task. */\r
+ prvInitialiseTCBVariables( pxNewTCB, pcName, uxPriority, xRegions, usStackDepth );\r
+\r
+ /* Initialize the TCB stack to look as if the task was already running,\r
+ but had been interrupted by the scheduler. The return address is set\r
+ to the start of the task function. Once the stack has been initialised\r
+ the top of stack variable is updated. */\r
+ #if( portUSING_MPU_WRAPPERS == 1 )\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );\r
+ }\r
+ #else\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );\r
+ }\r
+ #endif\r
+\r
+ /* Check the alignment of the initialised stack. */\r
+ portALIGNMENT_ASSERT_pxCurrentTCB( ( ( ( unsigned long ) pxNewTCB->pxTopOfStack & ( unsigned long ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
+\r
+ if( ( void * ) pxCreatedTask != NULL )\r
+ {\r
+ /* Pass the TCB out - in an anonymous way. The calling function/\r
+ task can use this as a handle to delete the task later if\r
+ required.*/\r
+ *pxCreatedTask = ( xTaskHandle ) pxNewTCB;\r
+ }\r
+ \r
+ /* We are going to manipulate the task queues to add this task to a\r
+ ready list, so must make sure no interrupts occur. */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ uxCurrentNumberOfTasks++;\r
+ if( pxCurrentTCB == NULL )\r
+ {\r
+ /* There are no other tasks, or all the other tasks are in\r
+ the suspended state - make this the current task. */\r
+ pxCurrentTCB = pxNewTCB;\r
+\r
+ if( uxCurrentNumberOfTasks == ( unsigned portBASE_TYPE ) 1 )\r
+ {\r
+ /* This is the first task to be created so do the preliminary\r
+ initialisation required. We will not recover if this call\r
+ fails, but we will report the failure. */\r
+ prvInitialiseTaskLists();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* If the scheduler is not already running, make this task the\r
+ current task if it is the highest priority task to be created\r
+ so far. */\r
+ if( xSchedulerRunning == pdFALSE )\r
+ {\r
+ if( pxCurrentTCB->uxPriority <= uxPriority )\r
+ {\r
+ pxCurrentTCB = pxNewTCB;\r
+ }\r
+ }\r
+ }\r
+\r
+ /* Remember the top priority to make context switching faster. Use\r
+ the priority in pxNewTCB as this has been capped to a valid value. */\r
+ if( pxNewTCB->uxPriority > uxTopUsedPriority )\r
+ {\r
+ uxTopUsedPriority = pxNewTCB->uxPriority;\r
+ }\r
+\r
+ #if ( configUSE_TRACE_FACILITY == 1 )\r
+ {\r
+ /* Add a counter into the TCB for tracing only. */\r
+ pxNewTCB->uxTCBNumber = uxTaskNumber;\r
+ }\r
+ #endif\r
+ uxTaskNumber++;\r
+\r
+ prvAddTaskToReadyQueue( pxNewTCB );\r
+\r
+ xReturn = pdPASS;\r
+ portSETUP_TCB( pxNewTCB );\r
+ traceTASK_CREATE( pxNewTCB );\r
+ }\r
+ taskEXIT_CRITICAL();\r
+ }\r
+ else\r
+ {\r
+ xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;\r
+ traceTASK_CREATE_FAILED();\r
+ }\r
+\r
+ if( xReturn == pdPASS )\r
+ {\r
+ if( xSchedulerRunning != pdFALSE )\r
+ {\r
+ /* If the created task is of a higher priority than the current task\r
+ then it should run now. */\r
+ if( pxCurrentTCB->uxPriority < uxPriority )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_vTaskDelete == 1 )\r
+\r
+ void vTaskDelete( xTaskHandle pxTaskToDelete )\r
+ {\r
+ tskTCB *pxTCB;\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* Ensure a yield is performed if the current task is being\r
+ deleted. */\r
+ if( pxTaskToDelete == pxCurrentTCB )\r
+ {\r
+ pxTaskToDelete = NULL;\r
+ }\r
+\r
+ /* If null is passed in here then we are deleting ourselves. */\r
+ pxTCB = prvGetTCBFromHandle( pxTaskToDelete );\r
+\r
+ /* Remove task from the ready list and place in the termination list.\r
+ This will stop the task from be scheduled. The idle task will check\r
+ the termination list and free up any memory allocated by the\r
+ scheduler for the TCB and stack. */\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+\r
+ /* Is the task waiting on an event also? */\r
+ if( pxTCB->xEventListItem.pvContainer != NULL )\r
+ {\r
+ vListRemove( &( pxTCB->xEventListItem ) );\r
+ }\r
+\r
+ vListInsertEnd( ( xList * ) &xTasksWaitingTermination, &( pxTCB->xGenericListItem ) );\r
+\r
+ /* Increment the ucTasksDeleted variable so the idle task knows\r
+ there is a task that has been deleted and that it should therefore\r
+ check the xTasksWaitingTermination list. */\r
+ ++uxTasksDeleted;\r
+\r
+ /* Increment the uxTaskNumberVariable also so kernel aware debuggers\r
+ can detect that the task lists need re-generating. */\r
+ uxTaskNumber++;\r
+\r
+ traceTASK_DELETE( pxTCB );\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ /* Force a reschedule if we have just deleted the current task. */\r
+ if( xSchedulerRunning != pdFALSE )\r
+ {\r
+ if( ( void * ) pxTaskToDelete == NULL )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+\r
+#endif\r
+\r
+\r
+\r
+\r
+\r
+\r
+/*-----------------------------------------------------------\r
+ * TASK CONTROL API documented in task.h\r
+ *----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_vTaskDelayUntil == 1 )\r
+\r
+ void vTaskDelayUntil( portTickType * const pxPreviousWakeTime, portTickType xTimeIncrement )\r
+ {\r
+ portTickType xTimeToWake;\r
+ portBASE_TYPE xAlreadyYielded, xShouldDelay = pdFALSE;\r
+\r
+ configASSERT( pxPreviousWakeTime );\r
+ configASSERT( ( xTimeIncrement > 0U ) );\r
+\r
+ vTaskSuspendAll();\r
+ {\r
+ /* Generate the tick time at which the task wants to wake. */\r
+ xTimeToWake = *pxPreviousWakeTime + xTimeIncrement;\r
+\r
+ if( xTickCount < *pxPreviousWakeTime )\r
+ {\r
+ /* The tick count has overflowed since this function was\r
+ lasted called. In this case the only time we should ever\r
+ actually delay is if the wake time has also overflowed,\r
+ and the wake time is greater than the tick time. When this\r
+ is the case it is as if neither time had overflowed. */\r
+ if( ( xTimeToWake < *pxPreviousWakeTime ) && ( xTimeToWake > xTickCount ) )\r
+ {\r
+ xShouldDelay = pdTRUE;\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* The tick time has not overflowed. In this case we will\r
+ delay if either the wake time has overflowed, and/or the\r
+ tick time is less than the wake time. */\r
+ if( ( xTimeToWake < *pxPreviousWakeTime ) || ( xTimeToWake > xTickCount ) )\r
+ {\r
+ xShouldDelay = pdTRUE;\r
+ }\r
+ }\r
+\r
+ /* Update the wake time ready for the next call. */\r
+ *pxPreviousWakeTime = xTimeToWake;\r
+\r
+ if( xShouldDelay != pdFALSE )\r
+ {\r
+ traceTASK_DELAY_UNTIL();\r
+\r
+ /* We must remove ourselves from the ready list before adding\r
+ ourselves to the blocked list as the same list item is used for\r
+ both lists. */\r
+ vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
+ prvAddCurrentTaskToDelayedList( xTimeToWake );\r
+ }\r
+ }\r
+ xAlreadyYielded = xTaskResumeAll();\r
+\r
+ /* Force a reschedule if xTaskResumeAll has not already done so, we may\r
+ have put ourselves to sleep. */\r
+ if( xAlreadyYielded == pdFALSE )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_vTaskDelay == 1 )\r
+\r
+ void vTaskDelay( portTickType xTicksToDelay )\r
+ {\r
+ portTickType xTimeToWake;\r
+ signed portBASE_TYPE xAlreadyYielded = pdFALSE;\r
+\r
+ /* A delay time of zero just forces a reschedule. */\r
+ if( xTicksToDelay > ( portTickType ) 0U )\r
+ {\r
+ vTaskSuspendAll();\r
+ {\r
+ traceTASK_DELAY();\r
+\r
+ /* A task that is removed from the event list while the\r
+ scheduler is suspended will not get placed in the ready\r
+ list or removed from the blocked list until the scheduler\r
+ is resumed.\r
+\r
+ This task cannot be in an event list as it is the currently\r
+ executing task. */\r
+\r
+ /* Calculate the time to wake - this may overflow but this is\r
+ not a problem. */\r
+ xTimeToWake = xTickCount + xTicksToDelay;\r
+\r
+ /* We must remove ourselves from the ready list before adding\r
+ ourselves to the blocked list as the same list item is used for\r
+ both lists. */\r
+ vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
+ prvAddCurrentTaskToDelayedList( xTimeToWake );\r
+ }\r
+ xAlreadyYielded = xTaskResumeAll();\r
+ }\r
+\r
+ /* Force a reschedule if xTaskResumeAll has not already done so, we may\r
+ have put ourselves to sleep. */\r
+ if( xAlreadyYielded == pdFALSE )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_uxTaskPriorityGet == 1 )\r
+\r
+ unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask )\r
+ {\r
+ tskTCB *pxTCB;\r
+ unsigned portBASE_TYPE uxReturn;\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* If null is passed in here then we are changing the\r
+ priority of the calling function. */\r
+ pxTCB = prvGetTCBFromHandle( pxTask );\r
+ uxReturn = pxTCB->uxPriority;\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ return uxReturn;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_vTaskPrioritySet == 1 )\r
+\r
+ void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority )\r
+ {\r
+ tskTCB *pxTCB;\r
+ unsigned portBASE_TYPE uxCurrentPriority;\r
+ portBASE_TYPE xYieldRequired = pdFALSE;\r
+\r
+ configASSERT( ( uxNewPriority < configMAX_PRIORITIES ) );\r
+\r
+ /* Ensure the new priority is valid. */\r
+ if( uxNewPriority >= configMAX_PRIORITIES )\r
+ {\r
+ uxNewPriority = configMAX_PRIORITIES - ( unsigned portBASE_TYPE ) 1U;\r
+ }\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ if( pxTask == pxCurrentTCB )\r
+ {\r
+ pxTask = NULL;\r
+ }\r
+\r
+ /* If null is passed in here then we are changing the\r
+ priority of the calling function. */\r
+ pxTCB = prvGetTCBFromHandle( pxTask );\r
+\r
+ traceTASK_PRIORITY_SET( pxTCB, uxNewPriority );\r
+\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ uxCurrentPriority = pxTCB->uxBasePriority;\r
+ }\r
+ #else\r
+ {\r
+ uxCurrentPriority = pxTCB->uxPriority;\r
+ }\r
+ #endif\r
+\r
+ if( uxCurrentPriority != uxNewPriority )\r
+ {\r
+ /* The priority change may have readied a task of higher\r
+ priority than the calling task. */\r
+ if( uxNewPriority > uxCurrentPriority )\r
+ {\r
+ if( pxTask != NULL )\r
+ {\r
+ /* The priority of another task is being raised. If we\r
+ were raising the priority of the currently running task\r
+ there would be no need to switch as it must have already\r
+ been the highest priority task. */\r
+ xYieldRequired = pdTRUE;\r
+ }\r
+ }\r
+ else if( pxTask == NULL )\r
+ {\r
+ /* Setting our own priority down means there may now be another\r
+ task of higher priority that is ready to execute. */\r
+ xYieldRequired = pdTRUE;\r
+ }\r
+\r
+\r
+\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ /* Only change the priority being used if the task is not\r
+ currently using an inherited priority. */\r
+ if( pxTCB->uxBasePriority == pxTCB->uxPriority )\r
+ {\r
+ pxTCB->uxPriority = uxNewPriority;\r
+ }\r
+\r
+ /* The base priority gets set whatever. */\r
+ pxTCB->uxBasePriority = uxNewPriority;\r
+ }\r
+ #else\r
+ {\r
+ pxTCB->uxPriority = uxNewPriority;\r
+ }\r
+ #endif\r
+\r
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( configMAX_PRIORITIES - ( portTickType ) uxNewPriority ) );\r
+\r
+ /* If the task is in the blocked or suspended list we need do\r
+ nothing more than change it's priority variable. However, if\r
+ the task is in a ready list it needs to be removed and placed\r
+ in the queue appropriate to its new priority. */\r
+ if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxCurrentPriority ] ), &( pxTCB->xGenericListItem ) ) )\r
+ {\r
+ /* The task is currently in its ready list - remove before adding\r
+ it to it's new ready list. As we are in a critical section we\r
+ can do this even if the scheduler is suspended. */\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+ prvAddTaskToReadyQueue( pxTCB );\r
+ }\r
+\r
+ if( xYieldRequired == pdTRUE )\r
+ {\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_vTaskSuspend == 1 )\r
+\r
+ void vTaskSuspend( xTaskHandle pxTaskToSuspend )\r
+ {\r
+ tskTCB *pxTCB;\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* Ensure a yield is performed if the current task is being\r
+ suspended. */\r
+ if( pxTaskToSuspend == pxCurrentTCB )\r
+ {\r
+ pxTaskToSuspend = NULL;\r
+ }\r
+\r
+ /* If null is passed in here then we are suspending ourselves. */\r
+ pxTCB = prvGetTCBFromHandle( pxTaskToSuspend );\r
+\r
+ traceTASK_SUSPEND( pxTCB );\r
+\r
+ /* Remove task from the ready/delayed list and place in the suspended list. */\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+\r
+ /* Is the task waiting on an event also? */\r
+ if( pxTCB->xEventListItem.pvContainer != NULL )\r
+ {\r
+ vListRemove( &( pxTCB->xEventListItem ) );\r
+ }\r
+\r
+ vListInsertEnd( ( xList * ) &xSuspendedTaskList, &( pxTCB->xGenericListItem ) );\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ if( ( void * ) pxTaskToSuspend == NULL )\r
+ {\r
+ if( xSchedulerRunning != pdFALSE )\r
+ {\r
+ /* We have just suspended the current task. */\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ else\r
+ {\r
+ /* The scheduler is not running, but the task that was pointed\r
+ to by pxCurrentTCB has just been suspended and pxCurrentTCB\r
+ must be adjusted to point to a different task. */\r
+ if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == uxCurrentNumberOfTasks )\r
+ {\r
+ /* No other tasks are ready, so set pxCurrentTCB back to\r
+ NULL so when the next task is created pxCurrentTCB will\r
+ be set to point to it no matter what its relative priority\r
+ is. */\r
+ pxCurrentTCB = NULL;\r
+ }\r
+ else\r
+ {\r
+ vTaskSwitchContext();\r
+ }\r
+ }\r
+ }\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_vTaskSuspend == 1 )\r
+\r
+ signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask )\r
+ {\r
+ portBASE_TYPE xReturn = pdFALSE;\r
+ const tskTCB * const pxTCB = ( tskTCB * ) xTask;\r
+\r
+ /* It does not make sense to check if the calling task is suspended. */\r
+ configASSERT( xTask );\r
+\r
+ /* Is the task we are attempting to resume actually in the\r
+ suspended list? */\r
+ if( listIS_CONTAINED_WITHIN( &xSuspendedTaskList, &( pxTCB->xGenericListItem ) ) != pdFALSE )\r
+ {\r
+ /* Has the task already been resumed from within an ISR? */\r
+ if( listIS_CONTAINED_WITHIN( &xPendingReadyList, &( pxTCB->xEventListItem ) ) != pdTRUE )\r
+ {\r
+ /* Is it in the suspended list because it is in the\r
+ Suspended state? It is possible to be in the suspended\r
+ list because it is blocked on a task with no timeout\r
+ specified. */\r
+ if( listIS_CONTAINED_WITHIN( NULL, &( pxTCB->xEventListItem ) ) == pdTRUE )\r
+ {\r
+ xReturn = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_vTaskSuspend == 1 )\r
+\r
+ void vTaskResume( xTaskHandle pxTaskToResume )\r
+ {\r
+ tskTCB *pxTCB;\r
+\r
+ /* It does not make sense to resume the calling task. */\r
+ configASSERT( pxTaskToResume );\r
+\r
+ /* Remove the task from whichever list it is currently in, and place\r
+ it in the ready list. */\r
+ pxTCB = ( tskTCB * ) pxTaskToResume;\r
+\r
+ /* The parameter cannot be NULL as it is impossible to resume the\r
+ currently executing task. */\r
+ if( ( pxTCB != NULL ) && ( pxTCB != pxCurrentTCB ) )\r
+ {\r
+ taskENTER_CRITICAL();\r
+ {\r
+ if( xTaskIsTaskSuspended( pxTCB ) == pdTRUE )\r
+ {\r
+ traceTASK_RESUME( pxTCB );\r
+\r
+ /* As we are in a critical section we can access the ready\r
+ lists even if the scheduler is suspended. */\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+ prvAddTaskToReadyQueue( pxTCB );\r
+\r
+ /* We may have just resumed a higher priority task. */\r
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
+ {\r
+ /* This yield may not cause the task just resumed to run, but\r
+ will leave the lists in the correct state for the next yield. */\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+ }\r
+ }\r
+\r
+#endif\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) )\r
+\r
+ portBASE_TYPE xTaskResumeFromISR( xTaskHandle pxTaskToResume )\r
+ {\r
+ portBASE_TYPE xYieldRequired = pdFALSE;\r
+ tskTCB *pxTCB;\r
+ unsigned portBASE_TYPE uxSavedInterruptStatus;\r
+\r
+ configASSERT( pxTaskToResume );\r
+\r
+ pxTCB = ( tskTCB * ) pxTaskToResume;\r
+\r
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
+ {\r
+ if( xTaskIsTaskSuspended( pxTCB ) == pdTRUE )\r
+ {\r
+ traceTASK_RESUME_FROM_ISR( pxTCB );\r
+\r
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
+ {\r
+ xYieldRequired = ( pxTCB->uxPriority >= pxCurrentTCB->uxPriority );\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+ prvAddTaskToReadyQueue( pxTCB );\r
+ }\r
+ else\r
+ {\r
+ /* We cannot access the delayed or ready lists, so will hold this\r
+ task pending until the scheduler is resumed, at which point a\r
+ yield will be performed if necessary. */\r
+ vListInsertEnd( ( xList * ) &( xPendingReadyList ), &( pxTCB->xEventListItem ) );\r
+ }\r
+ }\r
+ }\r
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
+\r
+ return xYieldRequired;\r
+ }\r
+\r
+#endif\r
+\r
+\r
+\r
+\r
+/*-----------------------------------------------------------\r
+ * PUBLIC SCHEDULER CONTROL documented in task.h\r
+ *----------------------------------------------------------*/\r
+\r
+\r
+void vTaskStartScheduler( void )\r
+{\r
+portBASE_TYPE xReturn;\r
+\r
+ /* Add the idle task at the lowest priority. */\r
+ #if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )\r
+ {\r
+ /* Create the idle task, storing its handle in xIdleTaskHandle so it can\r
+ be returned by the xTaskGetIdleTaskHandle() function. */\r
+ xReturn = xTaskCreate( prvIdleTask, ( signed char * ) "IDLE", tskIDLE_STACK_SIZE, ( void * ) NULL, ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ), &xIdleTaskHandle );\r
+ }\r
+ #else\r
+ {\r
+ /* Create the idle task without storing its handle. */\r
+ xReturn = xTaskCreate( prvIdleTask, ( signed char * ) "IDLE", tskIDLE_STACK_SIZE, ( void * ) NULL, ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ), NULL );\r
+ }\r
+ #endif\r
+\r
+ #if ( configUSE_TIMERS == 1 )\r
+ {\r
+ if( xReturn == pdPASS )\r
+ {\r
+ xReturn = xTimerCreateTimerTask();\r
+ }\r
+ }\r
+ #endif\r
+\r
+ if( xReturn == pdPASS )\r
+ {\r
+ /* Interrupts are turned off here, to ensure a tick does not occur\r
+ before or during the call to xPortStartScheduler(). The stacks of\r
+ the created tasks contain a status word with interrupts switched on\r
+ so interrupts will automatically get re-enabled when the first task\r
+ starts to run.\r
+\r
+ STEPPING THROUGH HERE USING A DEBUGGER CAN CAUSE BIG PROBLEMS IF THE\r
+ DEBUGGER ALLOWS INTERRUPTS TO BE PROCESSED. */\r
+ portDISABLE_INTERRUPTS();\r
+\r
+ xSchedulerRunning = pdTRUE;\r
+ xTickCount = ( portTickType ) 0U;\r
+\r
+ /* If configGENERATE_RUN_TIME_STATS is defined then the following\r
+ macro must be defined to configure the timer/counter used to generate\r
+ the run time counter time base. */\r
+ portCONFIGURE_TIMER_FOR_RUN_TIME_STATS();\r
+ \r
+ /* Setting up the timer tick is hardware specific and thus in the\r
+ portable interface. */\r
+ if( xPortStartScheduler() != pdFALSE )\r
+ {\r
+ /* Should not reach here as if the scheduler is running the\r
+ function will not return. */\r
+ }\r
+ else\r
+ {\r
+ /* Should only reach here if a task calls xTaskEndScheduler(). */\r
+ }\r
+ }\r
+\r
+ /* This line will only be reached if the kernel could not be started. */\r
+ configASSERT( xReturn );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vTaskEndScheduler( void )\r
+{\r
+ /* Stop the scheduler interrupts and call the portable scheduler end\r
+ routine so the original ISRs can be restored if necessary. The port\r
+ layer must ensure interrupts enable bit is left in the correct state. */\r
+ portDISABLE_INTERRUPTS();\r
+ xSchedulerRunning = pdFALSE;\r
+ vPortEndScheduler();\r
+}\r
+/*----------------------------------------------------------*/\r
+\r
+void vTaskSuspendAll( void )\r
+{\r
+ /* A critical section is not required as the variable is of type\r
+ portBASE_TYPE. */\r
+ ++uxSchedulerSuspended;\r
+}\r
+/*----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xTaskResumeAll( void )\r
+{\r
+register tskTCB *pxTCB;\r
+signed portBASE_TYPE xAlreadyYielded = pdFALSE;\r
+\r
+ /* If uxSchedulerSuspended is zero then this function does not match a\r
+ previous call to vTaskSuspendAll(). */\r
+ configASSERT( uxSchedulerSuspended );\r
+\r
+ /* It is possible that an ISR caused a task to be removed from an event\r
+ list while the scheduler was suspended. If this was the case then the\r
+ removed task will have been added to the xPendingReadyList. Once the\r
+ scheduler has been resumed it is safe to move all the pending ready\r
+ tasks from this list into their appropriate ready list. */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ --uxSchedulerSuspended;\r
+\r
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
+ {\r
+ if( uxCurrentNumberOfTasks > ( unsigned portBASE_TYPE ) 0U )\r
+ {\r
+ portBASE_TYPE xYieldRequired = pdFALSE;\r
+\r
+ /* Move any readied tasks from the pending list into the\r
+ appropriate ready list. */\r
+ while( listLIST_IS_EMPTY( ( xList * ) &xPendingReadyList ) == pdFALSE )\r
+ {\r
+ pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( ( ( xList * ) &xPendingReadyList ) );\r
+ vListRemove( &( pxTCB->xEventListItem ) );\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+ prvAddTaskToReadyQueue( pxTCB );\r
+\r
+ /* If we have moved a task that has a priority higher than\r
+ the current task then we should yield. */\r
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
+ {\r
+ xYieldRequired = pdTRUE;\r
+ }\r
+ }\r
+\r
+ /* If any ticks occurred while the scheduler was suspended then\r
+ they should be processed now. This ensures the tick count does not\r
+ slip, and that any delayed tasks are resumed at the correct time. */\r
+ if( uxMissedTicks > ( unsigned portBASE_TYPE ) 0U )\r
+ {\r
+ while( uxMissedTicks > ( unsigned portBASE_TYPE ) 0U )\r
+ {\r
+ vTaskIncrementTick();\r
+ --uxMissedTicks;\r
+ }\r
+\r
+ /* As we have processed some ticks it is appropriate to yield\r
+ to ensure the highest priority task that is ready to run is\r
+ the task actually running. */\r
+ #if configUSE_PREEMPTION == 1\r
+ {\r
+ xYieldRequired = pdTRUE;\r
+ }\r
+ #endif\r
+ }\r
+\r
+ if( ( xYieldRequired == pdTRUE ) || ( xMissedYield == pdTRUE ) )\r
+ {\r
+ xAlreadyYielded = pdTRUE;\r
+ xMissedYield = pdFALSE;\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ return xAlreadyYielded;\r
+}\r
+\r
+\r
+\r
+\r
+\r
+\r
+/*-----------------------------------------------------------\r
+ * PUBLIC TASK UTILITIES documented in task.h\r
+ *----------------------------------------------------------*/\r
+\r
+\r
+\r
+portTickType xTaskGetTickCount( void )\r
+{\r
+portTickType xTicks;\r
+\r
+ /* Critical section required if running on a 16 bit processor. */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ xTicks = xTickCount;\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ return xTicks;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+portTickType xTaskGetTickCountFromISR( void )\r
+{\r
+portTickType xReturn;\r
+unsigned portBASE_TYPE uxSavedInterruptStatus;\r
+\r
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();\r
+ xReturn = xTickCount;\r
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+unsigned portBASE_TYPE uxTaskGetNumberOfTasks( void )\r
+{\r
+ /* A critical section is not required because the variables are of type\r
+ portBASE_TYPE. */\r
+ return uxCurrentNumberOfTasks;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_pcTaskGetTaskName == 1 )\r
+\r
+ signed char *pcTaskGetTaskName( xTaskHandle xTaskToQuery )\r
+ {\r
+ tskTCB *pxTCB;\r
+\r
+ /* If null is passed in here then the name of the calling task is being queried. */\r
+ pxTCB = prvGetTCBFromHandle( xTaskToQuery );\r
+ configASSERT( pxTCB );\r
+ return &( pxTCB->pcTaskName[ 0 ] );\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_TRACE_FACILITY == 1 )\r
+\r
+ void vTaskList( signed char *pcWriteBuffer )\r
+ {\r
+ unsigned portBASE_TYPE uxQueue;\r
+\r
+ /* This is a VERY costly function that should be used for debug only.\r
+ It leaves interrupts disabled for a LONG time. */\r
+\r
+ vTaskSuspendAll();\r
+ {\r
+ /* Run through all the lists that could potentially contain a TCB and\r
+ report the task name, state and stack high water mark. */\r
+\r
+ *pcWriteBuffer = ( signed char ) 0x00;\r
+ strcat( ( char * ) pcWriteBuffer, ( const char * ) "\r\n" );\r
+\r
+ uxQueue = uxTopUsedPriority + ( unsigned portBASE_TYPE ) 1U;\r
+\r
+ do\r
+ {\r
+ uxQueue--;\r
+\r
+ if( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxQueue ] ) ) == pdFALSE )\r
+ {\r
+ prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) &( pxReadyTasksLists[ uxQueue ] ), tskREADY_CHAR );\r
+ }\r
+ }while( uxQueue > ( unsigned short ) tskIDLE_PRIORITY );\r
+\r
+ if( listLIST_IS_EMPTY( pxDelayedTaskList ) == pdFALSE )\r
+ {\r
+ prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) pxDelayedTaskList, tskBLOCKED_CHAR );\r
+ }\r
+\r
+ if( listLIST_IS_EMPTY( pxOverflowDelayedTaskList ) == pdFALSE )\r
+ {\r
+ prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) pxOverflowDelayedTaskList, tskBLOCKED_CHAR );\r
+ }\r
+\r
+ #if( INCLUDE_vTaskDelete == 1 )\r
+ {\r
+ if( listLIST_IS_EMPTY( &xTasksWaitingTermination ) == pdFALSE )\r
+ {\r
+ prvListTaskWithinSingleList( pcWriteBuffer, &xTasksWaitingTermination, tskDELETED_CHAR );\r
+ }\r
+ }\r
+ #endif\r
+\r
+ #if ( INCLUDE_vTaskSuspend == 1 )\r
+ {\r
+ if( listLIST_IS_EMPTY( &xSuspendedTaskList ) == pdFALSE )\r
+ {\r
+ prvListTaskWithinSingleList( pcWriteBuffer, &xSuspendedTaskList, tskSUSPENDED_CHAR );\r
+ }\r
+ }\r
+ #endif\r
+ }\r
+ xTaskResumeAll();\r
+ }\r
+\r
+#endif\r
+/*----------------------------------------------------------*/\r
+\r
+#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+\r
+ void vTaskGetRunTimeStats( signed char *pcWriteBuffer )\r
+ {\r
+ unsigned portBASE_TYPE uxQueue;\r
+ unsigned long ulTotalRunTime;\r
+\r
+ /* This is a VERY costly function that should be used for debug only.\r
+ It leaves interrupts disabled for a LONG time. */\r
+\r
+ vTaskSuspendAll();\r
+ {\r
+ #ifdef portALT_GET_RUN_TIME_COUNTER_VALUE\r
+ portALT_GET_RUN_TIME_COUNTER_VALUE( ulTotalRunTime );\r
+ #else\r
+ ulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();\r
+ #endif\r
+\r
+ /* Divide ulTotalRunTime by 100 to make the percentage caluclations\r
+ simpler in the prvGenerateRunTimeStatsForTasksInList() function. */\r
+ ulTotalRunTime /= 100UL;\r
+ \r
+ /* Run through all the lists that could potentially contain a TCB,\r
+ generating a table of run timer percentages in the provided\r
+ buffer. */\r
+\r
+ *pcWriteBuffer = ( signed char ) 0x00;\r
+ strcat( ( char * ) pcWriteBuffer, ( const char * ) "\r\n" );\r
+\r
+ uxQueue = uxTopUsedPriority + ( unsigned portBASE_TYPE ) 1U;\r
+\r
+ do\r
+ {\r
+ uxQueue--;\r
+\r
+ if( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxQueue ] ) ) == pdFALSE )\r
+ {\r
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) &( pxReadyTasksLists[ uxQueue ] ), ulTotalRunTime );\r
+ }\r
+ }while( uxQueue > ( unsigned short ) tskIDLE_PRIORITY );\r
+\r
+ if( listLIST_IS_EMPTY( pxDelayedTaskList ) == pdFALSE )\r
+ {\r
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) pxDelayedTaskList, ulTotalRunTime );\r
+ }\r
+\r
+ if( listLIST_IS_EMPTY( pxOverflowDelayedTaskList ) == pdFALSE )\r
+ {\r
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) pxOverflowDelayedTaskList, ulTotalRunTime );\r
+ }\r
+\r
+ #if ( INCLUDE_vTaskDelete == 1 )\r
+ {\r
+ if( listLIST_IS_EMPTY( &xTasksWaitingTermination ) == pdFALSE )\r
+ {\r
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, &xTasksWaitingTermination, ulTotalRunTime );\r
+ }\r
+ }\r
+ #endif\r
+\r
+ #if ( INCLUDE_vTaskSuspend == 1 )\r
+ {\r
+ if( listLIST_IS_EMPTY( &xSuspendedTaskList ) == pdFALSE )\r
+ {\r
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, &xSuspendedTaskList, ulTotalRunTime );\r
+ }\r
+ }\r
+ #endif\r
+ }\r
+ xTaskResumeAll();\r
+ }\r
+\r
+#endif\r
+/*----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )\r
+\r
+ xTaskHandle xTaskGetIdleTaskHandle( void )\r
+ {\r
+ /* If xTaskGetIdleTaskHandle() is called before the scheduler has been\r
+ started, then xIdleTaskHandle will be NULL. */\r
+ configASSERT( ( xIdleTaskHandle != NULL ) );\r
+ return xIdleTaskHandle;\r
+ }\r
+ \r
+#endif\r
+\r
+/*-----------------------------------------------------------\r
+ * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES\r
+ * documented in task.h\r
+ *----------------------------------------------------------*/\r
+\r
+void vTaskIncrementTick( void )\r
+{\r
+tskTCB * pxTCB;\r
+\r
+ /* Called by the portable layer each time a tick interrupt occurs.\r
+ Increments the tick then checks to see if the new tick value will cause any\r
+ tasks to be unblocked. */\r
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
+ {\r
+ ++xTickCount;\r
+ if( xTickCount == ( portTickType ) 0U )\r
+ {\r
+ xList *pxTemp;\r
+\r
+ /* Tick count has overflowed so we need to swap the delay lists.\r
+ If there are any items in pxDelayedTaskList here then there is\r
+ an error! */\r
+ configASSERT( ( listLIST_IS_EMPTY( pxDelayedTaskList ) ) );\r
+ \r
+ pxTemp = pxDelayedTaskList;\r
+ pxDelayedTaskList = pxOverflowDelayedTaskList;\r
+ pxOverflowDelayedTaskList = pxTemp;\r
+ xNumOfOverflows++;\r
+ \r
+ if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )\r
+ {\r
+ /* The new current delayed list is empty. Set\r
+ xNextTaskUnblockTime to the maximum possible value so it is\r
+ extremely unlikely that the \r
+ if( xTickCount >= xNextTaskUnblockTime ) test will pass until\r
+ there is an item in the delayed list. */\r
+ xNextTaskUnblockTime = portMAX_DELAY;\r
+ }\r
+ else\r
+ {\r
+ /* The new current delayed list is not empty, get the value of\r
+ the item at the head of the delayed list. This is the time at\r
+ which the task at the head of the delayed list should be removed\r
+ from the Blocked state. */\r
+ pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList );\r
+ xNextTaskUnblockTime = listGET_LIST_ITEM_VALUE( &( pxTCB->xGenericListItem ) );\r
+ }\r
+ }\r
+\r
+ /* See if this tick has made a timeout expire. */\r
+ prvCheckDelayedTasks();\r
+ }\r
+ else\r
+ {\r
+ ++uxMissedTicks;\r
+\r
+ /* The tick hook gets called at regular intervals, even if the\r
+ scheduler is locked. */\r
+ #if ( configUSE_TICK_HOOK == 1 )\r
+ {\r
+ vApplicationTickHook();\r
+ }\r
+ #endif\r
+ }\r
+\r
+ #if ( configUSE_TICK_HOOK == 1 )\r
+ {\r
+ /* Guard against the tick hook being called when the missed tick\r
+ count is being unwound (when the scheduler is being unlocked. */\r
+ if( uxMissedTicks == ( unsigned portBASE_TYPE ) 0U )\r
+ {\r
+ vApplicationTickHook();\r
+ }\r
+ }\r
+ #endif\r
+\r
+ traceTASK_INCREMENT_TICK( xTickCount );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
+\r
+ void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction )\r
+ {\r
+ tskTCB *xTCB;\r
+\r
+ /* If xTask is NULL then we are setting our own task hook. */\r
+ if( xTask == NULL )\r
+ {\r
+ xTCB = ( tskTCB * ) pxCurrentTCB;\r
+ }\r
+ else\r
+ {\r
+ xTCB = ( tskTCB * ) xTask;\r
+ }\r
+\r
+ /* Save the hook function in the TCB. A critical section is required as\r
+ the value can be accessed from an interrupt. */\r
+ taskENTER_CRITICAL();\r
+ xTCB->pxTaskTag = pxHookFunction;\r
+ taskEXIT_CRITICAL();\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
+\r
+ pdTASK_HOOK_CODE xTaskGetApplicationTaskTag( xTaskHandle xTask )\r
+ {\r
+ tskTCB *xTCB;\r
+ pdTASK_HOOK_CODE xReturn;\r
+\r
+ /* If xTask is NULL then we are setting our own task hook. */\r
+ if( xTask == NULL )\r
+ {\r
+ xTCB = ( tskTCB * ) pxCurrentTCB;\r
+ }\r
+ else\r
+ {\r
+ xTCB = ( tskTCB * ) xTask;\r
+ }\r
+\r
+ /* Save the hook function in the TCB. A critical section is required as\r
+ the value can be accessed from an interrupt. */\r
+ taskENTER_CRITICAL();\r
+ xReturn = xTCB->pxTaskTag;\r
+ taskEXIT_CRITICAL();\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
+\r
+ portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, void *pvParameter )\r
+ {\r
+ tskTCB *xTCB;\r
+ portBASE_TYPE xReturn;\r
+\r
+ /* If xTask is NULL then we are calling our own task hook. */\r
+ if( xTask == NULL )\r
+ {\r
+ xTCB = ( tskTCB * ) pxCurrentTCB;\r
+ }\r
+ else\r
+ {\r
+ xTCB = ( tskTCB * ) xTask;\r
+ }\r
+\r
+ if( xTCB->pxTaskTag != NULL )\r
+ {\r
+ xReturn = xTCB->pxTaskTag( pvParameter );\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdFAIL;\r
+ }\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+void vTaskSwitchContext( void )\r
+{\r
+ if( uxSchedulerSuspended != ( unsigned portBASE_TYPE ) pdFALSE )\r
+ {\r
+ /* The scheduler is currently suspended - do not allow a context\r
+ switch. */\r
+ xMissedYield = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ traceTASK_SWITCHED_OUT();\r
+ \r
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+ {\r
+ unsigned long ulTempCounter;\r
+ \r
+ #ifdef portALT_GET_RUN_TIME_COUNTER_VALUE\r
+ portALT_GET_RUN_TIME_COUNTER_VALUE( ulTempCounter );\r
+ #else\r
+ ulTempCounter = portGET_RUN_TIME_COUNTER_VALUE();\r
+ #endif\r
+ \r
+ /* Add the amount of time the task has been running to the accumulated\r
+ time so far. The time the task started running was stored in\r
+ ulTaskSwitchedInTime. Note that there is no overflow protection here\r
+ so count values are only valid until the timer overflows. Generally\r
+ this will be about 1 hour assuming a 1uS timer increment. */\r
+ pxCurrentTCB->ulRunTimeCounter += ( ulTempCounter - ulTaskSwitchedInTime );\r
+ ulTaskSwitchedInTime = ulTempCounter;\r
+ }\r
+ #endif\r
+ \r
+ taskFIRST_CHECK_FOR_STACK_OVERFLOW();\r
+ taskSECOND_CHECK_FOR_STACK_OVERFLOW();\r
+ \r
+ /* Find the highest priority queue that contains ready tasks. */\r
+ while( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxTopReadyPriority ] ) ) )\r
+ {\r
+ configASSERT( uxTopReadyPriority );\r
+ --uxTopReadyPriority;\r
+ }\r
+ \r
+ /* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the tasks of the\r
+ same priority get an equal share of the processor time. */\r
+ listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopReadyPriority ] ) );\r
+ \r
+ traceTASK_SWITCHED_IN();\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vTaskPlaceOnEventList( const xList * const pxEventList, portTickType xTicksToWait )\r
+{\r
+portTickType xTimeToWake;\r
+\r
+ configASSERT( pxEventList );\r
+\r
+ /* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED OR THE\r
+ SCHEDULER SUSPENDED. */\r
+\r
+ /* Place the event list item of the TCB in the appropriate event list.\r
+ This is placed in the list in priority order so the highest priority task\r
+ is the first to be woken by the event. */\r
+ vListInsert( ( xList * ) pxEventList, ( xListItem * ) &( pxCurrentTCB->xEventListItem ) );\r
+\r
+ /* We must remove ourselves from the ready list before adding ourselves\r
+ to the blocked list as the same list item is used for both lists. We have\r
+ exclusive access to the ready lists as the scheduler is locked. */\r
+ vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
+\r
+\r
+ #if ( INCLUDE_vTaskSuspend == 1 )\r
+ {\r
+ if( xTicksToWait == portMAX_DELAY )\r
+ {\r
+ /* Add ourselves to the suspended task list instead of a delayed task\r
+ list to ensure we are not woken by a timing event. We will block\r
+ indefinitely. */\r
+ vListInsertEnd( ( xList * ) &xSuspendedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
+ }\r
+ else\r
+ {\r
+ /* Calculate the time at which the task should be woken if the event does\r
+ not occur. This may overflow but this doesn't matter. */\r
+ xTimeToWake = xTickCount + xTicksToWait;\r
+ prvAddCurrentTaskToDelayedList( xTimeToWake );\r
+ }\r
+ }\r
+ #else\r
+ {\r
+ /* Calculate the time at which the task should be woken if the event does\r
+ not occur. This may overflow but this doesn't matter. */\r
+ xTimeToWake = xTickCount + xTicksToWait;\r
+ prvAddCurrentTaskToDelayedList( xTimeToWake );\r
+ }\r
+ #endif\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if configUSE_TIMERS == 1\r
+\r
+ void vTaskPlaceOnEventListRestricted( const xList * const pxEventList, portTickType xTicksToWait )\r
+ {\r
+ portTickType xTimeToWake;\r
+\r
+ configASSERT( pxEventList );\r
+\r
+ /* This function should not be called by application code hence the\r
+ 'Restricted' in its name. It is not part of the public API. It is\r
+ designed for use by kernel code, and has special calling requirements -\r
+ it should be called from a critical section. */\r
+\r
+ \r
+ /* Place the event list item of the TCB in the appropriate event list.\r
+ In this case it is assume that this is the only task that is going to\r
+ be waiting on this event list, so the faster vListInsertEnd() function\r
+ can be used in place of vListInsert. */\r
+ vListInsertEnd( ( xList * ) pxEventList, ( xListItem * ) &( pxCurrentTCB->xEventListItem ) );\r
+\r
+ /* We must remove this task from the ready list before adding it to the\r
+ blocked list as the same list item is used for both lists. This\r
+ function is called form a critical section. */\r
+ vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
+\r
+ /* Calculate the time at which the task should be woken if the event does\r
+ not occur. This may overflow but this doesn't matter. */\r
+ xTimeToWake = xTickCount + xTicksToWait;\r
+ prvAddCurrentTaskToDelayedList( xTimeToWake );\r
+ }\r
+ \r
+#endif /* configUSE_TIMERS */\r
+/*-----------------------------------------------------------*/\r
+\r
+signed portBASE_TYPE xTaskRemoveFromEventList( const xList * const pxEventList )\r
+{\r
+tskTCB *pxUnblockedTCB;\r
+portBASE_TYPE xReturn;\r
+\r
+ /* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED OR THE\r
+ SCHEDULER SUSPENDED. It can also be called from within an ISR. */\r
+\r
+ /* The event list is sorted in priority order, so we can remove the\r
+ first in the list, remove the TCB from the delayed list, and add\r
+ it to the ready list.\r
+\r
+ If an event is for a queue that is locked then this function will never\r
+ get called - the lock count on the queue will get modified instead. This\r
+ means we can always expect exclusive access to the event list here.\r
+ \r
+ This function assumes that a check has already been made to ensure that\r
+ pxEventList is not empty. */\r
+ pxUnblockedTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );\r
+ configASSERT( pxUnblockedTCB );\r
+ vListRemove( &( pxUnblockedTCB->xEventListItem ) );\r
+\r
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
+ {\r
+ vListRemove( &( pxUnblockedTCB->xGenericListItem ) );\r
+ prvAddTaskToReadyQueue( pxUnblockedTCB );\r
+ }\r
+ else\r
+ {\r
+ /* We cannot access the delayed or ready lists, so will hold this\r
+ task pending until the scheduler is resumed. */\r
+ vListInsertEnd( ( xList * ) &( xPendingReadyList ), &( pxUnblockedTCB->xEventListItem ) );\r
+ }\r
+\r
+ if( pxUnblockedTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
+ {\r
+ /* Return true if the task removed from the event list has\r
+ a higher priority than the calling task. This allows\r
+ the calling task to know if it should force a context\r
+ switch now. */\r
+ xReturn = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdFALSE;\r
+ }\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vTaskSetTimeOutState( xTimeOutType * const pxTimeOut )\r
+{\r
+ configASSERT( pxTimeOut );\r
+ pxTimeOut->xOverflowCount = xNumOfOverflows;\r
+ pxTimeOut->xTimeOnEntering = xTickCount;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+portBASE_TYPE xTaskCheckForTimeOut( xTimeOutType * const pxTimeOut, portTickType * const pxTicksToWait )\r
+{\r
+portBASE_TYPE xReturn;\r
+\r
+ configASSERT( pxTimeOut );\r
+ configASSERT( pxTicksToWait );\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ #if ( INCLUDE_vTaskSuspend == 1 )\r
+ /* If INCLUDE_vTaskSuspend is set to 1 and the block time specified is\r
+ the maximum block time then the task should block indefinitely, and\r
+ therefore never time out. */\r
+ if( *pxTicksToWait == portMAX_DELAY )\r
+ {\r
+ xReturn = pdFALSE;\r
+ }\r
+ else /* We are not blocking indefinitely, perform the checks below. */\r
+ #endif\r
+\r
+ if( ( xNumOfOverflows != pxTimeOut->xOverflowCount ) && ( ( portTickType ) xTickCount >= ( portTickType ) pxTimeOut->xTimeOnEntering ) )\r
+ {\r
+ /* The tick count is greater than the time at which vTaskSetTimeout()\r
+ was called, but has also overflowed since vTaskSetTimeOut() was called.\r
+ It must have wrapped all the way around and gone past us again. This\r
+ passed since vTaskSetTimeout() was called. */\r
+ xReturn = pdTRUE;\r
+ }\r
+ else if( ( ( portTickType ) ( ( portTickType ) xTickCount - ( portTickType ) pxTimeOut->xTimeOnEntering ) ) < ( portTickType ) *pxTicksToWait )\r
+ {\r
+ /* Not a genuine timeout. Adjust parameters for time remaining. */\r
+ *pxTicksToWait -= ( ( portTickType ) xTickCount - ( portTickType ) pxTimeOut->xTimeOnEntering );\r
+ vTaskSetTimeOutState( pxTimeOut );\r
+ xReturn = pdFALSE;\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdTRUE;\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vTaskMissedYield( void )\r
+{\r
+ xMissedYield = pdTRUE;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_TRACE_FACILITY == 1 )\r
+ unsigned portBASE_TYPE uxTaskGetTaskNumber( xTaskHandle xTask )\r
+ {\r
+ unsigned portBASE_TYPE uxReturn;\r
+ tskTCB *pxTCB;\r
+ \r
+ if( xTask != NULL )\r
+ {\r
+ pxTCB = ( tskTCB * ) xTask;\r
+ uxReturn = pxTCB->uxTaskNumber;\r
+ }\r
+ else\r
+ {\r
+ uxReturn = 0U;\r
+ }\r
+ \r
+ return uxReturn;\r
+ }\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_TRACE_FACILITY == 1 )\r
+ void vTaskSetTaskNumber( xTaskHandle xTask, unsigned portBASE_TYPE uxHandle )\r
+ {\r
+ tskTCB *pxTCB;\r
+ \r
+ if( xTask != NULL )\r
+ {\r
+ pxTCB = ( tskTCB * ) xTask;\r
+ pxTCB->uxTaskNumber = uxHandle;\r
+ }\r
+ }\r
+#endif\r
+\r
+\r
+/*\r
+ * -----------------------------------------------------------\r
+ * The Idle task.\r
+ * ----------------------------------------------------------\r
+ *\r
+ * The portTASK_FUNCTION() macro is used to allow port/compiler specific\r
+ * language extensions. The equivalent prototype for this function is:\r
+ *\r
+ * void prvIdleTask( void *pvParameters );\r
+ *\r
+ */\r
+static portTASK_FUNCTION( prvIdleTask, pvParameters )\r
+{\r
+ /* Stop warnings. */\r
+ ( void ) pvParameters;\r
+\r
+ for( ;; )\r
+ {\r
+ /* See if any tasks have been deleted. */\r
+ prvCheckTasksWaitingTermination();\r
+\r
+ #if ( configUSE_PREEMPTION == 0 )\r
+ {\r
+ /* If we are not using preemption we keep forcing a task switch to\r
+ see if any other task has become available. If we are using\r
+ preemption we don't need to do this as any task becoming available\r
+ will automatically get the processor anyway. */\r
+ taskYIELD();\r
+ }\r
+ #endif\r
+\r
+ #if ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) )\r
+ {\r
+ /* When using preemption tasks of equal priority will be\r
+ timesliced. If a task that is sharing the idle priority is ready\r
+ to run then the idle task should yield before the end of the\r
+ timeslice.\r
+\r
+ A critical region is not required here as we are just reading from\r
+ the list, and an occasional incorrect value will not matter. If\r
+ the ready list at the idle priority contains more than one task\r
+ then a task other than the idle task is ready to execute. */\r
+ if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > ( unsigned portBASE_TYPE ) 1 )\r
+ {\r
+ taskYIELD();\r
+ }\r
+ }\r
+ #endif\r
+\r
+ #if ( configUSE_IDLE_HOOK == 1 )\r
+ {\r
+ extern void vApplicationIdleHook( void );\r
+\r
+ /* Call the user defined function from within the idle task. This\r
+ allows the application designer to add background functionality\r
+ without the overhead of a separate task.\r
+ NOTE: vApplicationIdleHook() MUST NOT, UNDER ANY CIRCUMSTANCES,\r
+ CALL A FUNCTION THAT MIGHT BLOCK. */\r
+ vApplicationIdleHook();\r
+ }\r
+ #endif\r
+ }\r
+} /*lint !e715 pvParameters is not accessed but all task functions require the same prototype. */\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+/*-----------------------------------------------------------\r
+ * File private functions documented at the top of the file.\r
+ *----------------------------------------------------------*/\r
+\r
+\r
+\r
+static void prvInitialiseTCBVariables( tskTCB *pxTCB, const signed char * const pcName, unsigned portBASE_TYPE uxPriority, const xMemoryRegion * const xRegions, unsigned short usStackDepth )\r
+{\r
+ /* Store the function name in the TCB. */\r
+ #if configMAX_TASK_NAME_LEN > 1\r
+ {\r
+ /* Don't bring strncpy into the build unnecessarily. */\r
+ strncpy( ( char * ) pxTCB->pcTaskName, ( const char * ) pcName, ( unsigned short ) configMAX_TASK_NAME_LEN );\r
+ }\r
+ #endif\r
+ pxTCB->pcTaskName[ ( unsigned short ) configMAX_TASK_NAME_LEN - ( unsigned short ) 1 ] = ( signed char ) '\0';\r
+\r
+ /* This is used as an array index so must ensure it's not too large. First\r
+ remove the privilege bit if one is present. */\r
+ if( uxPriority >= configMAX_PRIORITIES )\r
+ {\r
+ uxPriority = configMAX_PRIORITIES - ( unsigned portBASE_TYPE ) 1U;\r
+ }\r
+\r
+ pxTCB->uxPriority = uxPriority;\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ pxTCB->uxBasePriority = uxPriority;\r
+ }\r
+ #endif\r
+\r
+ vListInitialiseItem( &( pxTCB->xGenericListItem ) );\r
+ vListInitialiseItem( &( pxTCB->xEventListItem ) );\r
+\r
+ /* Set the pxTCB as a link back from the xListItem. This is so we can get\r
+ back to the containing TCB from a generic item in a list. */\r
+ listSET_LIST_ITEM_OWNER( &( pxTCB->xGenericListItem ), pxTCB );\r
+\r
+ /* Event lists are always in priority order. */\r
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) uxPriority );\r
+ listSET_LIST_ITEM_OWNER( &( pxTCB->xEventListItem ), pxTCB );\r
+\r
+ #if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
+ {\r
+ pxTCB->uxCriticalNesting = ( unsigned portBASE_TYPE ) 0U;\r
+ }\r
+ #endif\r
+\r
+ #if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
+ {\r
+ pxTCB->pxTaskTag = NULL;\r
+ }\r
+ #endif\r
+\r
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+ {\r
+ pxTCB->ulRunTimeCounter = 0UL;\r
+ }\r
+ #endif\r
+\r
+ #if ( portUSING_MPU_WRAPPERS == 1 )\r
+ {\r
+ vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, pxTCB->pxStack, usStackDepth );\r
+ }\r
+ #else\r
+ {\r
+ ( void ) xRegions;\r
+ ( void ) usStackDepth;\r
+ }\r
+ #endif\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( portUSING_MPU_WRAPPERS == 1 )\r
+\r
+ void vTaskAllocateMPURegions( xTaskHandle xTaskToModify, const xMemoryRegion * const xRegions )\r
+ {\r
+ tskTCB *pxTCB;\r
+ \r
+ if( xTaskToModify == pxCurrentTCB )\r
+ {\r
+ xTaskToModify = NULL;\r
+ }\r
+\r
+ /* If null is passed in here then we are deleting ourselves. */\r
+ pxTCB = prvGetTCBFromHandle( xTaskToModify );\r
+\r
+ vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, NULL, 0 );\r
+ }\r
+ /*-----------------------------------------------------------*/\r
+#endif\r
+\r
+static void prvInitialiseTaskLists( void )\r
+{\r
+unsigned portBASE_TYPE uxPriority;\r
+\r
+ for( uxPriority = ( unsigned portBASE_TYPE ) 0U; uxPriority < configMAX_PRIORITIES; uxPriority++ )\r
+ {\r
+ vListInitialise( ( xList * ) &( pxReadyTasksLists[ uxPriority ] ) );\r
+ }\r
+\r
+ vListInitialise( ( xList * ) &xDelayedTaskList1 );\r
+ vListInitialise( ( xList * ) &xDelayedTaskList2 );\r
+ vListInitialise( ( xList * ) &xPendingReadyList );\r
+\r
+ #if ( INCLUDE_vTaskDelete == 1 )\r
+ {\r
+ vListInitialise( ( xList * ) &xTasksWaitingTermination );\r
+ }\r
+ #endif\r
+\r
+ #if ( INCLUDE_vTaskSuspend == 1 )\r
+ {\r
+ vListInitialise( ( xList * ) &xSuspendedTaskList );\r
+ }\r
+ #endif\r
+\r
+ /* Start with pxDelayedTaskList using list1 and the pxOverflowDelayedTaskList\r
+ using list2. */\r
+ pxDelayedTaskList = &xDelayedTaskList1;\r
+ pxOverflowDelayedTaskList = &xDelayedTaskList2;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvCheckTasksWaitingTermination( void )\r
+{\r
+ #if ( INCLUDE_vTaskDelete == 1 )\r
+ {\r
+ portBASE_TYPE xListIsEmpty;\r
+\r
+ /* ucTasksDeleted is used to prevent vTaskSuspendAll() being called\r
+ too often in the idle task. */\r
+ if( uxTasksDeleted > ( unsigned portBASE_TYPE ) 0U )\r
+ {\r
+ vTaskSuspendAll();\r
+ xListIsEmpty = listLIST_IS_EMPTY( &xTasksWaitingTermination );\r
+ xTaskResumeAll();\r
+\r
+ if( xListIsEmpty == pdFALSE )\r
+ {\r
+ tskTCB *pxTCB;\r
+\r
+ taskENTER_CRITICAL();\r
+ {\r
+ pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( ( ( xList * ) &xTasksWaitingTermination ) );\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+ --uxCurrentNumberOfTasks;\r
+ --uxTasksDeleted;\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ prvDeleteTCB( pxTCB );\r
+ }\r
+ }\r
+ }\r
+ #endif\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvAddCurrentTaskToDelayedList( portTickType xTimeToWake )\r
+{\r
+ /* The list item will be inserted in wake time order. */\r
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xGenericListItem ), xTimeToWake );\r
+\r
+ if( xTimeToWake < xTickCount )\r
+ {\r
+ /* Wake time has overflowed. Place this item in the overflow list. */\r
+ vListInsert( ( xList * ) pxOverflowDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
+ }\r
+ else\r
+ {\r
+ /* The wake time has not overflowed, so we can use the current block list. */\r
+ vListInsert( ( xList * ) pxDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );\r
+\r
+ /* If the task entering the blocked state was placed at the head of the\r
+ list of blocked tasks then xNextTaskUnblockTime needs to be updated\r
+ too. */\r
+ if( xTimeToWake < xNextTaskUnblockTime )\r
+ {\r
+ xNextTaskUnblockTime = xTimeToWake;\r
+ }\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static tskTCB *prvAllocateTCBAndStack( unsigned short usStackDepth, portSTACK_TYPE *puxStackBuffer )\r
+{\r
+tskTCB *pxNewTCB;\r
+\r
+ /* Allocate space for the TCB. Where the memory comes from depends on\r
+ the implementation of the port malloc function. */\r
+ pxNewTCB = ( tskTCB * ) pvPortMalloc( sizeof( tskTCB ) );\r
+\r
+ if( pxNewTCB != NULL )\r
+ {\r
+ /* Allocate space for the stack used by the task being created.\r
+ The base of the stack memory stored in the TCB so the task can\r
+ be deleted later if required. */\r
+ pxNewTCB->pxStack = ( portSTACK_TYPE * ) pvPortMallocAligned( ( ( ( size_t )usStackDepth ) * sizeof( portSTACK_TYPE ) ), puxStackBuffer );\r
+\r
+ if( pxNewTCB->pxStack == NULL )\r
+ {\r
+ /* Could not allocate the stack. Delete the allocated TCB. */\r
+ vPortFree( pxNewTCB );\r
+ pxNewTCB = NULL;\r
+ }\r
+ else\r
+ {\r
+ /* Just to help debugging. */\r
+ memset( pxNewTCB->pxStack, ( int ) tskSTACK_FILL_BYTE, ( size_t ) usStackDepth * sizeof( portSTACK_TYPE ) );\r
+ }\r
+ }\r
+\r
+ return pxNewTCB;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_TRACE_FACILITY == 1 )\r
+\r
+ static void prvListTaskWithinSingleList( const signed char *pcWriteBuffer, xList *pxList, signed char cStatus )\r
+ {\r
+ volatile tskTCB *pxNextTCB, *pxFirstTCB;\r
+ unsigned short usStackRemaining;\r
+ PRIVILEGED_DATA static char pcStatusString[ configMAX_TASK_NAME_LEN + 30 ];\r
+\r
+ /* Write the details of all the TCB's in pxList into the buffer. */\r
+ listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );\r
+ do\r
+ {\r
+ listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );\r
+ #if ( portSTACK_GROWTH > 0 )\r
+ {\r
+ usStackRemaining = usTaskCheckFreeStackSpace( ( unsigned char * ) pxNextTCB->pxEndOfStack );\r
+ }\r
+ #else\r
+ {\r
+ usStackRemaining = usTaskCheckFreeStackSpace( ( unsigned char * ) pxNextTCB->pxStack );\r
+ }\r
+ #endif \r
+ \r
+ sprintf( pcStatusString, ( char * ) "%s\t\t%c\t%u\t%u\t%u\r\n", pxNextTCB->pcTaskName, cStatus, ( unsigned int ) pxNextTCB->uxPriority, usStackRemaining, ( unsigned int ) pxNextTCB->uxTCBNumber );\r
+ strcat( ( char * ) pcWriteBuffer, ( char * ) pcStatusString );\r
+\r
+ } while( pxNextTCB != pxFirstTCB );\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+\r
+ static void prvGenerateRunTimeStatsForTasksInList( const signed char *pcWriteBuffer, xList *pxList, unsigned long ulTotalRunTime )\r
+ {\r
+ volatile tskTCB *pxNextTCB, *pxFirstTCB;\r
+ unsigned long ulStatsAsPercentage;\r
+\r
+ /* Write the run time stats of all the TCB's in pxList into the buffer. */\r
+ listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );\r
+ do\r
+ {\r
+ /* Get next TCB in from the list. */\r
+ listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );\r
+\r
+ /* Divide by zero check. */\r
+ if( ulTotalRunTime > 0UL )\r
+ {\r
+ /* Has the task run at all? */\r
+ if( pxNextTCB->ulRunTimeCounter == 0UL )\r
+ {\r
+ /* The task has used no CPU time at all. */\r
+ sprintf( pcStatsString, ( char * ) "%s\t\t0\t\t0%%\r\n", pxNextTCB->pcTaskName );\r
+ }\r
+ else\r
+ {\r
+ /* What percentage of the total run time has the task used?\r
+ This will always be rounded down to the nearest integer.\r
+ ulTotalRunTime has already been divided by 100. */\r
+ ulStatsAsPercentage = pxNextTCB->ulRunTimeCounter / ulTotalRunTime;\r
+\r
+ if( ulStatsAsPercentage > 0UL )\r
+ {\r
+ #ifdef portLU_PRINTF_SPECIFIER_REQUIRED\r
+ {\r
+ sprintf( pcStatsString, ( char * ) "%s\t\t%lu\t\t%lu%%\r\n", pxNextTCB->pcTaskName, pxNextTCB->ulRunTimeCounter, ulStatsAsPercentage ); \r
+ }\r
+ #else\r
+ {\r
+ /* sizeof( int ) == sizeof( long ) so a smaller\r
+ printf() library can be used. */\r
+ sprintf( pcStatsString, ( char * ) "%s\t\t%u\t\t%u%%\r\n", pxNextTCB->pcTaskName, ( unsigned int ) pxNextTCB->ulRunTimeCounter, ( unsigned int ) ulStatsAsPercentage );\r
+ }\r
+ #endif\r
+ }\r
+ else\r
+ {\r
+ /* If the percentage is zero here then the task has\r
+ consumed less than 1% of the total run time. */\r
+ #ifdef portLU_PRINTF_SPECIFIER_REQUIRED\r
+ {\r
+ sprintf( pcStatsString, ( char * ) "%s\t\t%lu\t\t<1%%\r\n", pxNextTCB->pcTaskName, pxNextTCB->ulRunTimeCounter ); \r
+ }\r
+ #else\r
+ {\r
+ /* sizeof( int ) == sizeof( long ) so a smaller\r
+ printf() library can be used. */\r
+ sprintf( pcStatsString, ( char * ) "%s\t\t%u\t\t<1%%\r\n", pxNextTCB->pcTaskName, ( unsigned int ) pxNextTCB->ulRunTimeCounter );\r
+ }\r
+ #endif\r
+ }\r
+ }\r
+\r
+ strcat( ( char * ) pcWriteBuffer, ( char * ) pcStatsString );\r
+ }\r
+\r
+ } while( pxNextTCB != pxFirstTCB );\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
+\r
+ static unsigned short usTaskCheckFreeStackSpace( const unsigned char * pucStackByte )\r
+ {\r
+ register unsigned short usCount = 0U;\r
+\r
+ while( *pucStackByte == tskSTACK_FILL_BYTE )\r
+ {\r
+ pucStackByte -= portSTACK_GROWTH;\r
+ usCount++;\r
+ }\r
+\r
+ usCount /= sizeof( portSTACK_TYPE );\r
+\r
+ return usCount;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_uxTaskGetStackHighWaterMark == 1 )\r
+\r
+ unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask )\r
+ {\r
+ tskTCB *pxTCB;\r
+ unsigned char *pcEndOfStack;\r
+ unsigned portBASE_TYPE uxReturn;\r
+\r
+ pxTCB = prvGetTCBFromHandle( xTask );\r
+\r
+ #if portSTACK_GROWTH < 0\r
+ {\r
+ pcEndOfStack = ( unsigned char * ) pxTCB->pxStack;\r
+ }\r
+ #else\r
+ {\r
+ pcEndOfStack = ( unsigned char * ) pxTCB->pxEndOfStack;\r
+ }\r
+ #endif\r
+\r
+ uxReturn = ( unsigned portBASE_TYPE ) usTaskCheckFreeStackSpace( pcEndOfStack );\r
+\r
+ return uxReturn;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_vTaskDelete == 1 )\r
+\r
+ static void prvDeleteTCB( tskTCB *pxTCB )\r
+ {\r
+ /* This call is required specifically for the TriCore port. It must be\r
+ above the vPortFree() calls. The call is also used by ports/demos that\r
+ want to allocate and clean RAM statically. */\r
+ portCLEAN_UP_TCB( pxTCB );\r
+\r
+ /* Free up the memory allocated by the scheduler for the task. It is up to\r
+ the task to free any memory allocated at the application level. */\r
+ vPortFreeAligned( pxTCB->pxStack );\r
+ vPortFree( pxTCB );\r
+ }\r
+\r
+#endif\r
+\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) )\r
+\r
+ xTaskHandle xTaskGetCurrentTaskHandle( void )\r
+ {\r
+ xTaskHandle xReturn;\r
+\r
+ /* A critical section is not required as this is not called from\r
+ an interrupt and the current TCB will always be the same for any\r
+ individual execution thread. */\r
+ xReturn = pxCurrentTCB;\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )\r
+\r
+ portBASE_TYPE xTaskGetSchedulerState( void )\r
+ {\r
+ portBASE_TYPE xReturn;\r
+\r
+ if( xSchedulerRunning == pdFALSE )\r
+ {\r
+ xReturn = taskSCHEDULER_NOT_STARTED;\r
+ }\r
+ else\r
+ {\r
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )\r
+ {\r
+ xReturn = taskSCHEDULER_RUNNING;\r
+ }\r
+ else\r
+ {\r
+ xReturn = taskSCHEDULER_SUSPENDED;\r
+ }\r
+ }\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_MUTEXES == 1 )\r
+\r
+ void vTaskPriorityInherit( xTaskHandle * const pxMutexHolder )\r
+ {\r
+ tskTCB * const pxTCB = ( tskTCB * ) pxMutexHolder;\r
+\r
+ configASSERT( pxMutexHolder );\r
+\r
+ if( pxTCB->uxPriority < pxCurrentTCB->uxPriority )\r
+ {\r
+ /* Adjust the mutex holder state to account for its new priority. */\r
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) pxCurrentTCB->uxPriority );\r
+\r
+ /* If the task being modified is in the ready state it will need to\r
+ be moved in to a new list. */\r
+ if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ pxTCB->uxPriority ] ), &( pxTCB->xGenericListItem ) ) != pdFALSE )\r
+ {\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+\r
+ /* Inherit the priority before being moved into the new list. */\r
+ pxTCB->uxPriority = pxCurrentTCB->uxPriority;\r
+ prvAddTaskToReadyQueue( pxTCB );\r
+ }\r
+ else\r
+ {\r
+ /* Just inherit the priority. */\r
+ pxTCB->uxPriority = pxCurrentTCB->uxPriority;\r
+ }\r
+\r
+ traceTASK_PRIORITY_INHERIT( pxTCB, pxCurrentTCB->uxPriority );\r
+ }\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( configUSE_MUTEXES == 1 )\r
+\r
+ void vTaskPriorityDisinherit( xTaskHandle * const pxMutexHolder )\r
+ {\r
+ tskTCB * const pxTCB = ( tskTCB * ) pxMutexHolder;\r
+\r
+ if( pxMutexHolder != NULL )\r
+ {\r
+ if( pxTCB->uxPriority != pxTCB->uxBasePriority )\r
+ {\r
+ /* We must be the running task to be able to give the mutex back.\r
+ Remove ourselves from the ready list we currently appear in. */\r
+ vListRemove( &( pxTCB->xGenericListItem ) );\r
+\r
+ /* Disinherit the priority before adding the task into the new\r
+ ready list. */\r
+ traceTASK_PRIORITY_DISINHERIT( pxTCB, pxTCB->uxBasePriority );\r
+ pxTCB->uxPriority = pxTCB->uxBasePriority;\r
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) pxTCB->uxPriority );\r
+ prvAddTaskToReadyQueue( pxTCB );\r
+ }\r
+ }\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
+\r
+ void vTaskEnterCritical( void )\r
+ {\r
+ portDISABLE_INTERRUPTS();\r
+\r
+ if( xSchedulerRunning != pdFALSE )\r
+ {\r
+ ( pxCurrentTCB->uxCriticalNesting )++;\r
+ }\r
+ }\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
+\r
+void vTaskExitCritical( void )\r
+{\r
+ if( xSchedulerRunning != pdFALSE )\r
+ {\r
+ if( pxCurrentTCB->uxCriticalNesting > 0U )\r
+ {\r
+ ( pxCurrentTCB->uxCriticalNesting )--;\r
+\r
+ if( pxCurrentTCB->uxCriticalNesting == 0U )\r
+ {\r
+ portENABLE_INTERRUPTS();\r
+ }\r
+ }\r
+ }\r
+}\r
+\r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+\r
+\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V7.1.1 - Copyright (C) 2012 Real Time Engineers Ltd.\r
+\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * FreeRTOS tutorial books are available in pdf and paperback. *\r
+ * Complete, revised, and edited pdf reference manuals are also *\r
+ * available. *\r
+ * *\r
+ * Purchasing FreeRTOS documentation will not only help you, by *\r
+ * ensuring you get running as quickly as possible and with an *\r
+ * in-depth knowledge of how to use FreeRTOS, it will also help *\r
+ * the FreeRTOS project to continue with its mission of providing *\r
+ * professional grade, cross platform, de facto standard solutions *\r
+ * for microcontrollers - completely free of charge! *\r
+ * *\r
+ * >>> See http://www.FreeRTOS.org/Documentation for details. <<< *\r
+ * *\r
+ * Thank you for using FreeRTOS, and thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ >>>NOTE<<< The modification to the GPL is included to allow you to\r
+ distribute a combined work that includes FreeRTOS without being obliged to\r
+ provide the source code for proprietary components outside of the FreeRTOS\r
+ kernel. FreeRTOS is distributed in the hope that it will be useful, but\r
+ WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+ \r
+ ***************************************************************************\r
+ * *\r
+ * Having a problem? Start by reading the FAQ "My application does *\r
+ * not run, what could be wrong? *\r
+ * *\r
+ * http://www.FreeRTOS.org/FAQHelp.html *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ \r
+ http://www.FreeRTOS.org - Documentation, training, latest information, \r
+ license and contact details.\r
+ \r
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
+ including FreeRTOS+Trace - an indispensable productivity tool.\r
+\r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
+ the code with commercial support, indemnification, and middleware, under \r
+ the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
+ provide a safety engineered and independently SIL3 certified version under \r
+ the SafeRTOS brand: http://www.SafeRTOS.com.\r
+*/\r
+\r
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining\r
+all the API functions to use the MPU wrappers. That should only be done when\r
+task.h is included from an application file. */\r
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+#include "FreeRTOS.h"\r
+#include "task.h"\r
+#include "queue.h"\r
+#include "timers.h"\r
+\r
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE\r
+\r
+/* This entire source file will be skipped if the application is not configured\r
+to include software timer functionality. This #if is closed at the very bottom\r
+of this file. If you want to include software timer functionality then ensure\r
+configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */\r
+#if ( configUSE_TIMERS == 1 )\r
+\r
+/* Misc definitions. */\r
+#define tmrNO_DELAY ( portTickType ) 0U\r
+\r
+/* The definition of the timers themselves. */\r
+typedef struct tmrTimerControl\r
+{\r
+ const signed char *pcTimerName; /*<< Text name. This is not used by the kernel, it is included simply to make debugging easier. */\r
+ xListItem xTimerListItem; /*<< Standard linked list item as used by all kernel features for event management. */\r
+ portTickType xTimerPeriodInTicks;/*<< How quickly and often the timer expires. */\r
+ unsigned portBASE_TYPE uxAutoReload; /*<< Set to pdTRUE if the timer should be automatically restarted once expired. Set to pdFALSE if the timer is, in effect, a one shot timer. */\r
+ void *pvTimerID; /*<< An ID to identify the timer. This allows the timer to be identified when the same callback is used for multiple timers. */\r
+ tmrTIMER_CALLBACK pxCallbackFunction; /*<< The function that will be called when the timer expires. */\r
+} xTIMER;\r
+\r
+/* The definition of messages that can be sent and received on the timer\r
+queue. */\r
+typedef struct tmrTimerQueueMessage\r
+{\r
+ portBASE_TYPE xMessageID; /*<< The command being sent to the timer service task. */\r
+ portTickType xMessageValue; /*<< An optional value used by a subset of commands, for example, when changing the period of a timer. */\r
+ xTIMER * pxTimer; /*<< The timer to which the command will be applied. */\r
+} xTIMER_MESSAGE;\r
+\r
+\r
+/* The list in which active timers are stored. Timers are referenced in expire\r
+time order, with the nearest expiry time at the front of the list. Only the\r
+timer service task is allowed to access xActiveTimerList. */\r
+PRIVILEGED_DATA static xList xActiveTimerList1;\r
+PRIVILEGED_DATA static xList xActiveTimerList2;\r
+PRIVILEGED_DATA static xList *pxCurrentTimerList;\r
+PRIVILEGED_DATA static xList *pxOverflowTimerList;\r
+\r
+/* A queue that is used to send commands to the timer service task. */\r
+PRIVILEGED_DATA static xQueueHandle xTimerQueue = NULL;\r
+\r
+#if ( INCLUDE_xTimerGetTimerDaemonTaskHandle == 1 )\r
+ \r
+ PRIVILEGED_DATA static xTaskHandle xTimerTaskHandle = NULL;\r
+ \r
+#endif\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+/*\r
+ * Initialise the infrastructure used by the timer service task if it has not\r
+ * been initialised already.\r
+ */\r
+static void prvCheckForValidListAndQueue( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * The timer service task (daemon). Timer functionality is controlled by this\r
+ * task. Other tasks communicate with the timer service task using the\r
+ * xTimerQueue queue.\r
+ */\r
+static void prvTimerTask( void *pvParameters ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Called by the timer service task to interpret and process a command it\r
+ * received on the timer queue.\r
+ */\r
+static void prvProcessReceivedCommands( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Insert the timer into either xActiveTimerList1, or xActiveTimerList2,\r
+ * depending on if the expire time causes a timer counter overflow.\r
+ */\r
+static portBASE_TYPE prvInsertTimerInActiveList( xTIMER *pxTimer, portTickType xNextExpiryTime, portTickType xTimeNow, portTickType xCommandTime ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * An active timer has reached its expire time. Reload the timer if it is an\r
+ * auto reload timer, then call its callback.\r
+ */\r
+static void prvProcessExpiredTimer( portTickType xNextExpireTime, portTickType xTimeNow ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * The tick count has overflowed. Switch the timer lists after ensuring the\r
+ * current timer list does not still reference some timers.\r
+ */\r
+static void prvSwitchTimerLists( portTickType xLastTime ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Obtain the current tick count, setting *pxTimerListsWereSwitched to pdTRUE\r
+ * if a tick count overflow occurred since prvSampleTimeNow() was last called.\r
+ */\r
+static portTickType prvSampleTimeNow( portBASE_TYPE *pxTimerListsWereSwitched ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * If the timer list contains any active timers then return the expire time of\r
+ * the timer that will expire first and set *pxListWasEmpty to false. If the\r
+ * timer list does not contain any timers then return 0 and set *pxListWasEmpty\r
+ * to pdTRUE.\r
+ */\r
+static portTickType prvGetNextExpireTime( portBASE_TYPE *pxListWasEmpty ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * If a timer has expired, process it. Otherwise, block the timer service task\r
+ * until either a timer does expire or a command is received.\r
+ */\r
+static void prvProcessTimerOrBlockTask( portTickType xNextExpireTime, portBASE_TYPE xListWasEmpty ) PRIVILEGED_FUNCTION;\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+portBASE_TYPE xTimerCreateTimerTask( void )\r
+{\r
+portBASE_TYPE xReturn = pdFAIL;\r
+\r
+ /* This function is called when the scheduler is started if\r
+ configUSE_TIMERS is set to 1. Check that the infrastructure used by the\r
+ timer service task has been created/initialised. If timers have already\r
+ been created then the initialisation will already have been performed. */\r
+ prvCheckForValidListAndQueue();\r
+\r
+ if( xTimerQueue != NULL )\r
+ {\r
+ #if ( INCLUDE_xTimerGetTimerDaemonTaskHandle == 1 )\r
+ {\r
+ /* Create the timer task, storing its handle in xTimerTaskHandle so\r
+ it can be returned by the xTimerGetTimerDaemonTaskHandle() function. */\r
+ xReturn = xTaskCreate( prvTimerTask, ( const signed char * ) "Tmr Svc", ( unsigned short ) configTIMER_TASK_STACK_DEPTH, NULL, ( unsigned portBASE_TYPE ) configTIMER_TASK_PRIORITY, &xTimerTaskHandle ); \r
+ }\r
+ #else\r
+ {\r
+ /* Create the timer task without storing its handle. */\r
+ xReturn = xTaskCreate( prvTimerTask, ( const signed char * ) "Tmr Svc", ( unsigned short ) configTIMER_TASK_STACK_DEPTH, NULL, ( unsigned portBASE_TYPE ) configTIMER_TASK_PRIORITY, NULL);\r
+ }\r
+ #endif\r
+ }\r
+\r
+ configASSERT( xReturn );\r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+xTimerHandle xTimerCreate( const signed char *pcTimerName, portTickType xTimerPeriodInTicks, unsigned portBASE_TYPE uxAutoReload, void *pvTimerID, tmrTIMER_CALLBACK pxCallbackFunction )\r
+{\r
+xTIMER *pxNewTimer;\r
+\r
+ /* Allocate the timer structure. */\r
+ if( xTimerPeriodInTicks == ( portTickType ) 0U )\r
+ {\r
+ pxNewTimer = NULL;\r
+ configASSERT( ( xTimerPeriodInTicks > 0 ) );\r
+ }\r
+ else\r
+ {\r
+ pxNewTimer = ( xTIMER * ) pvPortMalloc( sizeof( xTIMER ) );\r
+ if( pxNewTimer != NULL )\r
+ {\r
+ /* Ensure the infrastructure used by the timer service task has been\r
+ created/initialised. */\r
+ prvCheckForValidListAndQueue();\r
+ \r
+ /* Initialise the timer structure members using the function parameters. */\r
+ pxNewTimer->pcTimerName = pcTimerName;\r
+ pxNewTimer->xTimerPeriodInTicks = xTimerPeriodInTicks;\r
+ pxNewTimer->uxAutoReload = uxAutoReload;\r
+ pxNewTimer->pvTimerID = pvTimerID;\r
+ pxNewTimer->pxCallbackFunction = pxCallbackFunction;\r
+ vListInitialiseItem( &( pxNewTimer->xTimerListItem ) );\r
+ \r
+ traceTIMER_CREATE( pxNewTimer );\r
+ }\r
+ else\r
+ {\r
+ traceTIMER_CREATE_FAILED();\r
+ }\r
+ }\r
+ \r
+ return ( xTimerHandle ) pxNewTimer;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+portBASE_TYPE xTimerGenericCommand( xTimerHandle xTimer, portBASE_TYPE xCommandID, portTickType xOptionalValue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portTickType xBlockTime )\r
+{\r
+portBASE_TYPE xReturn = pdFAIL;\r
+xTIMER_MESSAGE xMessage;\r
+\r
+ /* Send a message to the timer service task to perform a particular action\r
+ on a particular timer definition. */\r
+ if( xTimerQueue != NULL )\r
+ {\r
+ /* Send a command to the timer service task to start the xTimer timer. */\r
+ xMessage.xMessageID = xCommandID;\r
+ xMessage.xMessageValue = xOptionalValue;\r
+ xMessage.pxTimer = ( xTIMER * ) xTimer;\r
+\r
+ if( pxHigherPriorityTaskWoken == NULL )\r
+ {\r
+ if( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )\r
+ {\r
+ xReturn = xQueueSendToBack( xTimerQueue, &xMessage, xBlockTime );\r
+ }\r
+ else\r
+ {\r
+ xReturn = xQueueSendToBack( xTimerQueue, &xMessage, tmrNO_DELAY );\r
+ }\r
+ }\r
+ else\r
+ {\r
+ xReturn = xQueueSendToBackFromISR( xTimerQueue, &xMessage, pxHigherPriorityTaskWoken );\r
+ }\r
+ \r
+ traceTIMER_COMMAND_SEND( xTimer, xCommandID, xOptionalValue, xReturn );\r
+ }\r
+ \r
+ return xReturn;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+#if ( INCLUDE_xTimerGetTimerDaemonTaskHandle == 1 )\r
+\r
+ xTaskHandle xTimerGetTimerDaemonTaskHandle( void )\r
+ {\r
+ /* If xTimerGetTimerDaemonTaskHandle() is called before the scheduler has been\r
+ started, then xTimerTaskHandle will be NULL. */\r
+ configASSERT( ( xTimerTaskHandle != NULL ) );\r
+ return xTimerTaskHandle;\r
+ }\r
+ \r
+#endif\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvProcessExpiredTimer( portTickType xNextExpireTime, portTickType xTimeNow )\r
+{\r
+xTIMER *pxTimer;\r
+portBASE_TYPE xResult;\r
+\r
+ /* Remove the timer from the list of active timers. A check has already\r
+ been performed to ensure the list is not empty. */\r
+ pxTimer = ( xTIMER * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );\r
+ vListRemove( &( pxTimer->xTimerListItem ) );\r
+ traceTIMER_EXPIRED( pxTimer );\r
+\r
+ /* If the timer is an auto reload timer then calculate the next\r
+ expiry time and re-insert the timer in the list of active timers. */\r
+ if( pxTimer->uxAutoReload == ( unsigned portBASE_TYPE ) pdTRUE )\r
+ {\r
+ /* This is the only time a timer is inserted into a list using\r
+ a time relative to anything other than the current time. It\r
+ will therefore be inserted into the correct list relative to\r
+ the time this task thinks it is now, even if a command to\r
+ switch lists due to a tick count overflow is already waiting in\r
+ the timer queue. */\r
+ if( prvInsertTimerInActiveList( pxTimer, ( xNextExpireTime + pxTimer->xTimerPeriodInTicks ), xTimeNow, xNextExpireTime ) == pdTRUE )\r
+ {\r
+ /* The timer expired before it was added to the active timer\r
+ list. Reload it now. */\r
+ xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START, xNextExpireTime, NULL, tmrNO_DELAY );\r
+ configASSERT( xResult );\r
+ ( void ) xResult;\r
+ }\r
+ }\r
+\r
+ /* Call the timer callback. */\r
+ pxTimer->pxCallbackFunction( ( xTimerHandle ) pxTimer );\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvTimerTask( void *pvParameters )\r
+{\r
+portTickType xNextExpireTime;\r
+portBASE_TYPE xListWasEmpty;\r
+\r
+ /* Just to avoid compiler warnings. */\r
+ ( void ) pvParameters;\r
+\r
+ for( ;; )\r
+ {\r
+ /* Query the timers list to see if it contains any timers, and if so,\r
+ obtain the time at which the next timer will expire. */\r
+ xNextExpireTime = prvGetNextExpireTime( &xListWasEmpty );\r
+\r
+ /* If a timer has expired, process it. Otherwise, block this task\r
+ until either a timer does expire, or a command is received. */\r
+ prvProcessTimerOrBlockTask( xNextExpireTime, xListWasEmpty );\r
+ \r
+ /* Empty the command queue. */\r
+ prvProcessReceivedCommands(); \r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvProcessTimerOrBlockTask( portTickType xNextExpireTime, portBASE_TYPE xListWasEmpty )\r
+{\r
+portTickType xTimeNow;\r
+portBASE_TYPE xTimerListsWereSwitched;\r
+\r
+ vTaskSuspendAll();\r
+ {\r
+ /* Obtain the time now to make an assessment as to whether the timer\r
+ has expired or not. If obtaining the time causes the lists to switch\r
+ then don't process this timer as any timers that remained in the list\r
+ when the lists were switched will have been processed within the\r
+ prvSampelTimeNow() function. */\r
+ xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );\r
+ if( xTimerListsWereSwitched == pdFALSE )\r
+ {\r
+ /* The tick count has not overflowed, has the timer expired? */\r
+ if( ( xListWasEmpty == pdFALSE ) && ( xNextExpireTime <= xTimeNow ) )\r
+ {\r
+ xTaskResumeAll();\r
+ prvProcessExpiredTimer( xNextExpireTime, xTimeNow );\r
+ }\r
+ else\r
+ {\r
+ /* The tick count has not overflowed, and the next expire\r
+ time has not been reached yet. This task should therefore\r
+ block to wait for the next expire time or a command to be\r
+ received - whichever comes first. The following line cannot\r
+ be reached unless xNextExpireTime > xTimeNow, except in the\r
+ case when the current timer list is empty. */\r
+ vQueueWaitForMessageRestricted( xTimerQueue, ( xNextExpireTime - xTimeNow ) );\r
+\r
+ if( xTaskResumeAll() == pdFALSE )\r
+ {\r
+ /* Yield to wait for either a command to arrive, or the block time\r
+ to expire. If a command arrived between the critical section being\r
+ exited and this yield then the yield will not cause the task\r
+ to block. */\r
+ portYIELD_WITHIN_API();\r
+ }\r
+ }\r
+ }\r
+ else\r
+ {\r
+ xTaskResumeAll();\r
+ }\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static portTickType prvGetNextExpireTime( portBASE_TYPE *pxListWasEmpty )\r
+{\r
+portTickType xNextExpireTime;\r
+\r
+ /* Timers are listed in expiry time order, with the head of the list\r
+ referencing the task that will expire first. Obtain the time at which\r
+ the timer with the nearest expiry time will expire. If there are no\r
+ active timers then just set the next expire time to 0. That will cause\r
+ this task to unblock when the tick count overflows, at which point the\r
+ timer lists will be switched and the next expiry time can be\r
+ re-assessed. */\r
+ *pxListWasEmpty = listLIST_IS_EMPTY( pxCurrentTimerList );\r
+ if( *pxListWasEmpty == pdFALSE )\r
+ {\r
+ xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );\r
+ }\r
+ else\r
+ {\r
+ /* Ensure the task unblocks when the tick count rolls over. */\r
+ xNextExpireTime = ( portTickType ) 0U;\r
+ }\r
+\r
+ return xNextExpireTime;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static portTickType prvSampleTimeNow( portBASE_TYPE *pxTimerListsWereSwitched )\r
+{\r
+portTickType xTimeNow;\r
+static portTickType xLastTime = ( portTickType ) 0U;\r
+\r
+ xTimeNow = xTaskGetTickCount();\r
+ \r
+ if( xTimeNow < xLastTime )\r
+ {\r
+ prvSwitchTimerLists( xLastTime );\r
+ *pxTimerListsWereSwitched = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ *pxTimerListsWereSwitched = pdFALSE;\r
+ }\r
+ \r
+ xLastTime = xTimeNow;\r
+ \r
+ return xTimeNow;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static portBASE_TYPE prvInsertTimerInActiveList( xTIMER *pxTimer, portTickType xNextExpiryTime, portTickType xTimeNow, portTickType xCommandTime )\r
+{\r
+portBASE_TYPE xProcessTimerNow = pdFALSE;\r
+\r
+ listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xNextExpiryTime );\r
+ listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );\r
+ \r
+ if( xNextExpiryTime <= xTimeNow )\r
+ {\r
+ /* Has the expiry time elapsed between the command to start/reset a\r
+ timer was issued, and the time the command was processed? */\r
+ if( ( ( portTickType ) ( xTimeNow - xCommandTime ) ) >= pxTimer->xTimerPeriodInTicks )\r
+ {\r
+ /* The time between a command being issued and the command being\r
+ processed actually exceeds the timers period. */\r
+ xProcessTimerNow = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ vListInsert( pxOverflowTimerList, &( pxTimer->xTimerListItem ) );\r
+ }\r
+ }\r
+ else\r
+ {\r
+ if( ( xTimeNow < xCommandTime ) && ( xNextExpiryTime >= xCommandTime ) )\r
+ {\r
+ /* If, since the command was issued, the tick count has overflowed\r
+ but the expiry time has not, then the timer must have already passed\r
+ its expiry time and should be processed immediately. */\r
+ xProcessTimerNow = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );\r
+ }\r
+ }\r
+\r
+ return xProcessTimerNow;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvProcessReceivedCommands( void )\r
+{\r
+xTIMER_MESSAGE xMessage;\r
+xTIMER *pxTimer;\r
+portBASE_TYPE xTimerListsWereSwitched, xResult;\r
+portTickType xTimeNow;\r
+\r
+ /* In this case the xTimerListsWereSwitched parameter is not used, but it\r
+ must be present in the function call. */\r
+ xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );\r
+\r
+ while( xQueueReceive( xTimerQueue, &xMessage, tmrNO_DELAY ) != pdFAIL )\r
+ {\r
+ pxTimer = xMessage.pxTimer;\r
+\r
+ /* Is the timer already in a list of active timers? When the command\r
+ is trmCOMMAND_PROCESS_TIMER_OVERFLOW, the timer will be NULL as the\r
+ command is to the task rather than to an individual timer. */\r
+ if( pxTimer != NULL )\r
+ {\r
+ if( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) == pdFALSE )\r
+ {\r
+ /* The timer is in a list, remove it. */\r
+ vListRemove( &( pxTimer->xTimerListItem ) );\r
+ }\r
+ }\r
+\r
+ traceTIMER_COMMAND_RECEIVED( pxTimer, xMessage.xMessageID, xMessage.xMessageValue );\r
+ \r
+ switch( xMessage.xMessageID )\r
+ {\r
+ case tmrCOMMAND_START : \r
+ /* Start or restart a timer. */\r
+ if( prvInsertTimerInActiveList( pxTimer, xMessage.xMessageValue + pxTimer->xTimerPeriodInTicks, xTimeNow, xMessage.xMessageValue ) == pdTRUE )\r
+ {\r
+ /* The timer expired before it was added to the active timer\r
+ list. Process it now. */\r
+ pxTimer->pxCallbackFunction( ( xTimerHandle ) pxTimer );\r
+\r
+ if( pxTimer->uxAutoReload == ( unsigned portBASE_TYPE ) pdTRUE )\r
+ {\r
+ xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START, xMessage.xMessageValue + pxTimer->xTimerPeriodInTicks, NULL, tmrNO_DELAY );\r
+ configASSERT( xResult );\r
+ ( void ) xResult;\r
+ }\r
+ }\r
+ break;\r
+\r
+ case tmrCOMMAND_STOP : \r
+ /* The timer has already been removed from the active list.\r
+ There is nothing to do here. */\r
+ break;\r
+\r
+ case tmrCOMMAND_CHANGE_PERIOD :\r
+ pxTimer->xTimerPeriodInTicks = xMessage.xMessageValue;\r
+ configASSERT( ( pxTimer->xTimerPeriodInTicks > 0 ) );\r
+ prvInsertTimerInActiveList( pxTimer, ( xTimeNow + pxTimer->xTimerPeriodInTicks ), xTimeNow, xTimeNow );\r
+ break;\r
+\r
+ case tmrCOMMAND_DELETE :\r
+ /* The timer has already been removed from the active list,\r
+ just free up the memory. */\r
+ vPortFree( pxTimer );\r
+ break;\r
+\r
+ default : \r
+ /* Don't expect to get here. */\r
+ break;\r
+ }\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvSwitchTimerLists( portTickType xLastTime )\r
+{\r
+portTickType xNextExpireTime, xReloadTime;\r
+xList *pxTemp;\r
+xTIMER *pxTimer;\r
+portBASE_TYPE xResult;\r
+\r
+ /* Remove compiler warnings if configASSERT() is not defined. */\r
+ ( void ) xLastTime;\r
+ \r
+ /* The tick count has overflowed. The timer lists must be switched.\r
+ If there are any timers still referenced from the current timer list\r
+ then they must have expired and should be processed before the lists\r
+ are switched. */\r
+ while( listLIST_IS_EMPTY( pxCurrentTimerList ) == pdFALSE )\r
+ {\r
+ xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );\r
+\r
+ /* Remove the timer from the list. */\r
+ pxTimer = ( xTIMER * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );\r
+ vListRemove( &( pxTimer->xTimerListItem ) );\r
+\r
+ /* Execute its callback, then send a command to restart the timer if\r
+ it is an auto-reload timer. It cannot be restarted here as the lists\r
+ have not yet been switched. */\r
+ pxTimer->pxCallbackFunction( ( xTimerHandle ) pxTimer );\r
+\r
+ if( pxTimer->uxAutoReload == ( unsigned portBASE_TYPE ) pdTRUE )\r
+ {\r
+ /* Calculate the reload value, and if the reload value results in\r
+ the timer going into the same timer list then it has already expired\r
+ and the timer should be re-inserted into the current list so it is\r
+ processed again within this loop. Otherwise a command should be sent\r
+ to restart the timer to ensure it is only inserted into a list after\r
+ the lists have been swapped. */\r
+ xReloadTime = ( xNextExpireTime + pxTimer->xTimerPeriodInTicks );\r
+ if( xReloadTime > xNextExpireTime )\r
+ {\r
+ listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xReloadTime );\r
+ listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );\r
+ vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );\r
+ }\r
+ else\r
+ {\r
+ xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START, xNextExpireTime, NULL, tmrNO_DELAY );\r
+ configASSERT( xResult );\r
+ ( void ) xResult;\r
+ }\r
+ }\r
+ }\r
+\r
+ pxTemp = pxCurrentTimerList;\r
+ pxCurrentTimerList = pxOverflowTimerList;\r
+ pxOverflowTimerList = pxTemp;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvCheckForValidListAndQueue( void )\r
+{\r
+ /* Check that the list from which active timers are referenced, and the\r
+ queue used to communicate with the timer service, have been\r
+ initialised. */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ if( xTimerQueue == NULL )\r
+ {\r
+ vListInitialise( &xActiveTimerList1 );\r
+ vListInitialise( &xActiveTimerList2 );\r
+ pxCurrentTimerList = &xActiveTimerList1;\r
+ pxOverflowTimerList = &xActiveTimerList2;\r
+ xTimerQueue = xQueueCreate( ( unsigned portBASE_TYPE ) configTIMER_QUEUE_LENGTH, sizeof( xTIMER_MESSAGE ) );\r
+ }\r
+ }\r
+ taskEXIT_CRITICAL();\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+portBASE_TYPE xTimerIsTimerActive( xTimerHandle xTimer )\r
+{\r
+portBASE_TYPE xTimerIsInActiveList;\r
+xTIMER *pxTimer = ( xTIMER * ) xTimer;\r
+\r
+ /* Is the timer in the list of active timers? */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ /* Checking to see if it is in the NULL list in effect checks to see if\r
+ it is referenced from either the current or the overflow timer lists in\r
+ one go, but the logic has to be reversed, hence the '!'. */\r
+ xTimerIsInActiveList = !( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) );\r
+ }\r
+ taskEXIT_CRITICAL();\r
+\r
+ return xTimerIsInActiveList;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void *pvTimerGetTimerID( xTimerHandle xTimer )\r
+{\r
+xTIMER *pxTimer = ( xTIMER * ) xTimer;\r
+\r
+ return pxTimer->pvTimerID;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+/* This entire source file will be skipped if the application is not configured\r
+to include software timer functionality. If you want to include software timer\r
+functionality then ensure configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */\r
+#endif /* configUSE_TIMERS == 1 */\r
projects / freertos / commitdiff