source archive release.
JTAG Layer:
- * New CMSIS-DAP driver
- * Andes AICE debug adapter support
- * New OpenJTAG driver
- * New BCM2835 (RaspberryPi) driver
- * JTAG VPI client driver (for OpenRISC Reference Platform SoC)
- * Xilinx BSCAN_* for OpenRISC support
- * ST-LINKv2-1 support
- * ST-LINKv2 SWO tracing support (UART emulation)
- * JLink-OB (onboard) support
- * Altera USB Blaster driver rewrite, initial Blaster II
- support
- * ULINK driver ported to libusb-1.0, OpenULINK build fixes
- * Support up to 64 bit IR lengths
- * SVF playback (FPGA programming) fixes
- * "ftdi" interface driver got extensive testing and is now
- recommended over the old ft2232 implementation
Boundary Scan:
Target Layer:
- * New target: Andes nds32
- * New target: OpenRISC OR1K
- * New target: Intel Quark X10xx
- * MIPS EJTAG 1.5/2.0 support
- * MIPS speed improvements
- * Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE
- hosts now
- * XScale vector_catch support, reset fixes
- * dsp563xx ad-hoc breakpoint/watchpoint support
- * RTOS support for embKernel
- * Target profiling improvements
- * Memory access functions testbench
Flash Layer:
- * STM32 family sync with reference manuals, other bugfixes
- * STM32F401, STM32F07x support
- * Atmel SAM4L, SAMG5x support
- * at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s,
- at91sam3n0{a,b,0a,0b} support, bugfixes
- * Atmel SAMD support
- * Milandr 1986ВЕ* support
- * Kinetis KL, K21 support
- * Nuvoton NuMicro MINI5{1,2,4} support
- * Nuvoton NUC910 series support
- * NXP LPC43xx, LPC2000 fixes
- * NXP LPC800, LPC810 support
- * More ATmega parts supported
- * Fujitsu MB9Ax family support
- * EFM32 Wonder Gecko family support
- * Nordic nRF51 support
Board, Target, and Interface Configuration Scripts:
- * STM32W108xx generic target config
- * STM32F429 discovery board config
- * STM32 Nucleo boards configs
- * DENX M53EVK board config
- * Altera Cyclone V SoC, SoCkit config
- * New TI Launchpads board configs
- * TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board
- configs
- * Marvell Armada 370 family initial support
- * TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts
- * Freescale FRDM-KL25Z, KL46Z board configs
- * Digilent Zedboard config
- * Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs
- * Atmel Xplained initial support
- * Broadcom bcm28155_ap board config
- * TUMPA, TUMPA Lite interface configs
- * Digilent JTAG-SMT2 interface config
- * New RAM testing functions
- * Easy-to-use firmware recovery helpers targetting ordinary
- users with common equipment
Server Layer:
- * Auto-generation of GDB target description for ARMv7-M,
- ARM4, nds32, OR1K, Quark
- * GDB File-I/O Remote Protocol extension support
- * Default GDB flashing events handlers to initialise and reset
- the target automatically when "load" is used
Documentation:
- * Extensive README* changes
- * The official User's Guide was proofread
- * Example cross-build script
- * RTOS documentation improvements
- * Tcl RPC documentation and examples added
Build and Release:
- * *BSD, OS X, clang, ARM, windows build fixes
- * New pkg-config support changes the way libusb (and other
- dependencies) are handled. Many adapter drivers are now
- selected automatically during the configure stage.
This release also contains a number of other important functional and
cosmetic bugfixes. For more details about what has changed since the
last release, see the git repository history:
-http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path=
+http://sourceforge.net/p/openocd/code/ci/v0.9.0/log/?path=
For older NEWS, see the NEWS files associated with each release
--- /dev/null
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
+
+JTAG Layer:
+ * New CMSIS-DAP driver
+ * Andes AICE debug adapter support
+ * New OpenJTAG driver
+ * New BCM2835 (RaspberryPi) driver
+ * JTAG VPI client driver (for OpenRISC Reference Platform SoC)
+ * Xilinx BSCAN_* for OpenRISC support
+ * ST-LINKv2-1 support
+ * ST-LINKv2 SWO tracing support (UART emulation)
+ * JLink-OB (onboard) support
+ * Altera USB Blaster driver rewrite, initial Blaster II
+ support
+ * ULINK driver ported to libusb-1.0, OpenULINK build fixes
+ * Support up to 64 bit IR lengths
+ * SVF playback (FPGA programming) fixes
+ * "ftdi" interface driver got extensive testing and is now
+ recommended over the old ft2232 implementation
+
+Boundary Scan:
+
+Target Layer:
+ * New target: Andes nds32
+ * New target: OpenRISC OR1K
+ * New target: Intel Quark X10xx
+ * MIPS EJTAG 1.5/2.0 support
+ * MIPS speed improvements
+ * Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE
+ hosts now
+ * XScale vector_catch support, reset fixes
+ * dsp563xx ad-hoc breakpoint/watchpoint support
+ * RTOS support for embKernel
+ * Target profiling improvements
+ * Memory access functions testbench
+
+Flash Layer:
+ * STM32 family sync with reference manuals, other bugfixes
+ * STM32F401, STM32F07x support
+ * Atmel SAM4L, SAMG5x support
+ * at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s,
+ at91sam3n0{a,b,0a,0b} support, bugfixes
+ * Atmel SAMD support
+ * Milandr 1986ВЕ* support
+ * Kinetis KL, K21 support
+ * Nuvoton NuMicro MINI5{1,2,4} support
+ * Nuvoton NUC910 series support
+ * NXP LPC43xx, LPC2000 fixes
+ * NXP LPC800, LPC810 support
+ * More ATmega parts supported
+ * Fujitsu MB9Ax family support
+ * EFM32 Wonder Gecko family support
+ * Nordic nRF51 support
+
+Board, Target, and Interface Configuration Scripts:
+ * STM32W108xx generic target config
+ * STM32F429 discovery board config
+ * STM32 Nucleo boards configs
+ * DENX M53EVK board config
+ * Altera Cyclone V SoC, SoCkit config
+ * New TI Launchpads board configs
+ * TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board
+ configs
+ * Marvell Armada 370 family initial support
+ * TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts
+ * Freescale FRDM-KL25Z, KL46Z board configs
+ * Digilent Zedboard config
+ * Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs
+ * Atmel Xplained initial support
+ * Broadcom bcm28155_ap board config
+ * TUMPA, TUMPA Lite interface configs
+ * Digilent JTAG-SMT2 interface config
+ * New RAM testing functions
+ * Easy-to-use firmware recovery helpers targetting ordinary
+ users with common equipment
+
+Server Layer:
+ * Auto-generation of GDB target description for ARMv7-M,
+ ARM4, nds32, OR1K, Quark
+ * GDB File-I/O Remote Protocol extension support
+ * Default GDB flashing events handlers to initialise and reset
+ the target automatically when "load" is used
+
+Documentation:
+ * Extensive README* changes
+ * The official User's Guide was proofread
+ * Example cross-build script
+ * RTOS documentation improvements
+ * Tcl RPC documentation and examples added
+
+Build and Release:
+ * *BSD, OS X, clang, ARM, windows build fixes
+ * New pkg-config support changes the way libusb (and other
+ dependencies) are handled. Many adapter drivers are now
+ selected automatically during the configure stage.
+
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path=
+
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
+
+For more information about contributing test reports, bug fixes, or new
+features and device support, please read the new Developer Manual (or
+the BUGS and PATCHES.txt files in the source archive).
AC_PREREQ(2.64)
-AC_INIT([openocd], [0.8.0],
+AC_INIT([openocd], [0.9.0-dev],
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
AC_CONFIG_SRCDIR([src/openocd.c])
projects / openocd / commitdiff