- add missing configure.in change from last checkin

- add usbprog example config file
- update version string

git-svn-id: svn://svn.berlios.de/openocd/trunk@187 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/configure.in b/configure.in
index ce4e9d1b3c8f852dcb3a727e52f6b03a44ad1e09..20d3c02e1b12220825c8b99d67044235153c7aa1 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -67,6 +67,10 @@ AC_ARG_ENABLE(usbprog,
   AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]),
   [build_usbprog=$enableval], [build_usbprog=no])
 
+AC_ARG_ENABLE(oocd_trace,
+  AS_HELP_STRING([--enable-oocd_trace], [Enable building support for the OpenOCD+trace ETM capture device]),
+  [build_oocd_trace=$enableval], [build_oocd_trace=no])
+
 AC_ARG_WITH(ftd2xx,
         [AS_HELP_STRING(--with-ftd2xx,
            [Where libftd2xx can be found <default=search>])],
@@ -191,6 +195,12 @@ else
   AC_DEFINE(BUILD_USBPROG, 0, [0 if you don't want the usbprog JTAG driver.])
 fi
 
+if test $build_oocd_trace = yes; then
+  AC_DEFINE(BUILD_OOCD_TRACE, 1, [1 if you want the OpenOCD+trace ETM capture driver.])
+else
+  AC_DEFINE(BUILD_OOCD_TRACE, 0, [0 if you don't want the OpenOCD+trace ETM capture driver.])
+fi
+
 AM_CONFIG_HEADER(config.h)
 AM_INIT_AUTOMAKE(openocd, 0.1)
 
@@ -205,6 +215,7 @@ AM_CONDITIONAL(AMTJTAGACCEL, test $build_amtjtagaccel = yes)
 AM_CONDITIONAL(GW16012, test $build_gw16012 = yes)
 AM_CONDITIONAL(PRESTO, test $build_presto = yes)
 AM_CONDITIONAL(USBPROG, test $build_usbprog = yes)
+AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes)
 AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes)
 AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes)
 AM_CONDITIONAL(IS_WIN32, test $is_win32 = yes)

diff --git a/doc/configs/usbprog.cfg b/doc/configs/usbprog.cfg
new file mode 100644 (file)
index 0000000..fa434dd
--- /dev/null
+++ b/doc/configs/usbprog.cfg
@@ -0,0 +1,26 @@
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+#interface
+interface usbprog
+jtag_speed 2
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
+run_and_halt_time 0 30
+working_area 0 0x40000000 0x40000 nobackup
+
+#flash configuration
+flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
+flash bank cfi 0x80000000 0x400000 2 2 0

diff --git a/src/openocd.c b/src/openocd.c
index b20ffd23c83f732f44fa385fca0e3d6621ddae90..1bdbb1cac3e9bc25cc3b661a3ddf5866070eb932 100644 (file)
--- a/src/openocd.c
+++ b/src/openocd.c
@@ -18,7 +18,7 @@
  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  ***************************************************************************/
 
-#define OPENOCD_VERSION "Open On-Chip Debugger (2007-07-26 11:30 CEST)"
+#define OPENOCD_VERSION "Open On-Chip Debugger (2007-07-31 12:00 CEST)
 
 #ifdef HAVE_CONFIG_H
 #include "config.h"