******************************************************************************/\r
\r
/*\r
- * NOTE: This driver has been roughly modified specifically for use with the\r
- * uIP stack. It is no longer a generic driver.\r
+ *\r
+ *\r
+ * NOTE: This driver has been modified specifically for use with the* uIP stack.\r
+ * It is no longer a generic driver.\r
+ *\r
+ *\r
*/\r
\r
#ifdef __cplusplus\r
/* Allocating this many buffers will always ensure there is one free as, even\r
though TX_RING_SIZE is set to two, the two Tx descriptors will only ever point\r
to the same buffer. */\r
-#define macNUM_BUFFERS RX_RING_SIZE + TX_RING_SIZE + 2\r
+#define macNUM_BUFFERS RX_RING_SIZE + TX_RING_SIZE + 1\r
#define macBUFFER_SIZE 1488\r
\r
/***************************************************************/\r
/* Start general-purpose */\r
MAC->CSR11 = (MAC->CSR11 & ~CSR11_TIM_MASK) | (0x0000FFFFuL << CSR11_TIM_SHIFT);\r
\r
- /* Disable transmit interrupt mitigation. */\r
- MAC->CSR11 = ( MAC->CSR11 & ~CSR11_TT_MASK );\r
- MAC->CSR11 = ( MAC->CSR11 & ~CSR11_NTP_MASK );\r
-\r
- /* Automatic Tx descriptor polling. */\r
- MAC->CSR0 = ( MAC->CSR0 & ~CSR0_TAP_MASK );\r
- MAC->CSR0 = ( MAC->CSR0 | ( 0x01 << CSR0_TAP_SHIFT ) );\r
+ /* Ensure promiscous mode is off (it should be by default anyway). */\r
+ MAC_BITBAND->CSR6_PR = 0;\r
+ \r
+ /* Perfect filter. */\r
+ MAC_BITBAND->CSR6_HP = 1;\r
+ \r
+ /* Pass multcast. */\r
+ MAC_BITBAND->CSR6_PM = 1;\r
\r
/* Set descriptors */\r
MAC->CSR3 = (uint32_t)&(g_mss_mac.rx_descriptors[0].descriptor_0);\r
if( ( ( (g_mss_mac.tx_descriptors[ 0 ].descriptor_0) & TDES0_OWN) == TDES0_OWN ) || ( ( (g_mss_mac.tx_descriptors[ 1 ].descriptor_0) & TDES0_OWN) == TDES0_OWN ) )\r
{\r
error = MAC_BUFFER_IS_FULL;\r
- \r
- /* Check the buffers pointed to by the Tx descriptors, just in case a Tx\r
- interrupt has been missed and a free buffer remains marked as in use. */\r
- MSS_MAC_CheckTxBufferStatus();\r
}\r
\r
\r
}\r
\r
/***************************************************************************//**\r
- * Check the buffers assigned to the Tx descriptors to ensure that none remain\r
- * marked as in use even though the Tx has completed. This could happen if a\r
- * Tx interrupt was missed.\r
+ * Tx has completed, mark the buffers that were assigned to the Tx descriptors\r
+ * as free again.\r
*\r
*/\r
-void MSS_MAC_CheckTxBufferStatus( void )\r
+void MSS_MAC_FreeTxBuffers( void )\r
{\r
-unsigned char *pxTransmittedBuffer;\r
-long lDescriptor, lIndex;\r
-\r
- for( lDescriptor = 1; lDescriptor < TX_RING_SIZE; lDescriptor++ )\r
+ if( ( ( (g_mss_mac.tx_descriptors[ 0 ].descriptor_0) & TDES0_OWN) == 0 ) && ( ( (g_mss_mac.tx_descriptors[ 1 ].descriptor_0) & TDES0_OWN) == 0 ) )\r
{\r
- if( ( g_mss_mac.tx_descriptors[ lDescriptor ].descriptor_0 & TDES0_OWN ) == 0UL )\r
- {\r
- pxTransmittedBuffer = ( unsigned char * ) g_mss_mac.tx_descriptors[ lDescriptor ].buffer_1;\r
-\r
- for( lIndex = 0; lIndex < macNUM_BUFFERS; lIndex++ )\r
- {\r
- if( pxTransmittedBuffer == &( xMACBuffers.ucBuffer[ lIndex ][ 0 ] ) )\r
- {\r
- ucMACBufferInUse[ lIndex ] = pdFALSE;\r
- }\r
- } \r
- }\r
+ MAC_release_buffer( ( unsigned char * ) g_mss_mac.tx_descriptors[ 0 ].buffer_1 );\r
+ MAC_release_buffer( ( unsigned char * ) g_mss_mac.tx_descriptors[ 1 ].buffer_1 );\r
}\r
}\r
\r
}\r
}\r
\r
- /* Check the buffers pointed to by the Tx descriptors, just in case a Tx\r
- interrupt has been missed and a free buffer remains marked as in use. */\r
- MSS_MAC_CheckTxBufferStatus();\r
- \r
configASSERT( lIndex < macNUM_BUFFERS );\r
}\r
\r
* The double Tx has completed. Hand back the Tx buffer to the control of\r
* the MAC hardware.\r
*/\r
-void MSS_MAC_CheckTxBufferStatus( void );\r
+void MSS_MAC_FreeTxBuffers( void );\r
#ifdef __cplusplus\r
}\r
#endif\r
lReturn = pdTRUE;\r
}\r
}\r
+ taskEXIT_CRITICAL();\r
}\r
\r
return lReturn;\r
</plugin>\r
</debuggerPlugins>\r
</configuration>\r
+ <configuration>\r
+ <name>Full-with-optimisation</name>\r
+ <toolchain>\r
+ <name>ARM</name>\r
+ </toolchain>\r
+ <debug>1</debug>\r
+ <settings>\r
+ <name>C-SPY</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>22</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>CInput</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CEndian</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CProcessor</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OCVariant</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>MacOverride</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>MacFile</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>MemOverride</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>MemFile</name>\r
+ <state>$TOOLKIT_DIR$\CONFIG\debugger\Actel\ioa2f200m3f.ddf</state>\r
+ </option>\r
+ <option>\r
+ <name>RunToEnable</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>RunToName</name>\r
+ <state>main</state>\r
+ </option>\r
+ <option>\r
+ <name>CExtraOptionsCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CExtraOptions</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CFpuProcessor</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDDFArgumentProducer</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>OCDownloadSuppressDownload</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDownloadVerifyAll</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCProductVersion</name>\r
+ <state>6.10.1.52170</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDynDriverList</name>\r
+ <state>JLINK_ID</state>\r
+ </option>\r
+ <option>\r
+ <name>OCLastSavedByProductVersion</name>\r
+ <state>6.10.1.52170</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDownloadAttachToProgram</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>UseFlashLoader</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CLowLevel</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OCBE8Slave</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>MacFile2</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CDevice</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>FlashLoadersV3</name>\r
+ <state>$TOOLKIT_DIR$\config\flashloader\Actel\FlashA2FxxxM3F.board</state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesSuppressCheck1</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesPath1</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesSuppressCheck2</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesPath2</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesSuppressCheck3</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesPath3</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>OverrideDefFlashBoard</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesOffset1</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesOffset2</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesOffset3</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesUse1</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesUse2</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCImagesUse3</name>\r
+ <state>0</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>ARMSIM_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>1</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>OCSimDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OCSimEnablePSP</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCSimPspOverrideConfig</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCSimPspConfigFile</name>\r
+ <state></state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>ANGEL_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>0</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>CCAngelHeartbeat</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CAngelCommunication</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CAngelCommBaud</name>\r
+ <version>0</version>\r
+ <state>3</state>\r
+ </option>\r
+ <option>\r
+ <name>CAngelCommPort</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>ANGELTCPIP</name>\r
+ <state>aaa.bbb.ccc.ddd</state>\r
+ </option>\r
+ <option>\r
+ <name>DoAngelLogfile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AngelLogFile</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>GDBSERVER_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>0</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>TCPIP</name>\r
+ <state>aaa.bbb.ccc.ddd</state>\r
+ </option>\r
+ <option>\r
+ <name>DoLogfile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>LogFile</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJTagBreakpointRadio</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJTagDoUpdateBreakpoints</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJTagUpdateBreakpoints</name>\r
+ <state>_call_main</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>IARROM_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>1</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>CRomLogFileCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CRomLogFileEditB</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>CRomCommPort</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CRomCommBaud</name>\r
+ <version>0</version>\r
+ <state>7</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>JLINK_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>12</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>JLinkSpeed</name>\r
+ <state>32</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkDoLogfile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkLogFile</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkHWResetDelay</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>JLinkInitialSpeed</name>\r
+ <state>32</state>\r
+ </option>\r
+ <option>\r
+ <name>CCDoJlinkMultiTarget</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCScanChainNonARMDevices</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkMultiTarget</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkIRLength</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkCommRadio</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkTCPIP</name>\r
+ <state>aaa.bbb.ccc.ddd</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkSpeedRadioV2</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCUSBDevice</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchReset</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchUndef</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchSWI</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchData</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchPrefetch</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchIRQ</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchFIQ</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkBreakpointRadio</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkDoUpdateBreakpoints</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkUpdateBreakpoints</name>\r
+ <state>_call_main</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkInterfaceRadio</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCJLinkAttachSlave</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkResetList</name>\r
+ <version>4</version>\r
+ <state>7</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJLinkInterfaceCmdLine</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchCORERESET</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchMMERR</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchNOCPERR</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchCHRERR</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchSTATERR</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchBUSERR</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchINTERR</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchHARDERR</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCatchDummy</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCJLinkScriptFile</name>\r
+ <state>1</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>LMIFTDI_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>2</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>LmiftdiSpeed</name>\r
+ <state>500</state>\r
+ </option>\r
+ <option>\r
+ <name>CCLmiftdiDoLogfile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCLmiftdiLogFile</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>CCLmiFtdiInterfaceRadio</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCLmiFtdiInterfaceCmdLine</name>\r
+ <state>0</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>MACRAIGOR_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>3</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>jtag</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>EmuSpeed</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>TCPIP</name>\r
+ <state>aaa.bbb.ccc.ddd</state>\r
+ </option>\r
+ <option>\r
+ <name>DoLogfile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>LogFile</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>DoEmuMultiTarget</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>EmuMultiTarget</name>\r
+ <state>0@ARM7TDMI</state>\r
+ </option>\r
+ <option>\r
+ <name>EmuHWReset</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CEmuCommBaud</name>\r
+ <version>0</version>\r
+ <state>4</state>\r
+ </option>\r
+ <option>\r
+ <name>CEmuCommPort</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>jtago</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>UnusedAddr</name>\r
+ <state>0x00800000</state>\r
+ </option>\r
+ <option>\r
+ <name>CCMacraigorHWResetDelay</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CCJTagBreakpointRadio</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJTagDoUpdateBreakpoints</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJTagUpdateBreakpoints</name>\r
+ <state>_call_main</state>\r
+ </option>\r
+ <option>\r
+ <name>CCMacraigorInterfaceRadio</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCMacraigorInterfaceCmdLine</name>\r
+ <state>0</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>PEMICRO_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>0</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OCPEMicroAttachSlave</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPEMicroInterfaceList</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPEMicroResetDelay</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CCPEMicroJtagSpeed</name>\r
+ <state>#UNINITIALIZED#</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJPEMicroShowSettings</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>DoLogfile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>LogFile</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPEMicroUSBDevice</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPEMicroSerialPort</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCJPEMicroTCPIPAutoScanNetwork</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPEMicroTCPIP</name>\r
+ <state>10.0.0.1</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPEMicroCommCmdLineProducer</name>\r
+ <state>0</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>RDI_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>1</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>CRDIDriverDll</name>\r
+ <state>###Uninitialized###</state>\r
+ </option>\r
+ <option>\r
+ <name>CRDILogFileCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CRDILogFileEdit</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDIHWReset</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchReset</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchUndef</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchSWI</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchData</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchPrefetch</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchIRQ</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchFIQ</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDIUseETM</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>STLINK_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>1</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CCSTLinkInterfaceRadio</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCSTLinkInterfaceCmdLine</name>\r
+ <state>0</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>THIRDPARTY_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>0</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>CThirdPartyDriverDll</name>\r
+ <state>###Uninitialized###</state>\r
+ </option>\r
+ <option>\r
+ <name>CThirdPartyLogFileCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CThirdPartyLogFileEditB</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <debuggerPlugins>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>\r
+ <loadFlag>1</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$EW_DIR$\common\plugins\FreeRTOS\FreeRTOSPlugin.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$EW_DIR$\common\plugins\OpenRTOS\OpenRTOSPlugin.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>\r
+ <loadFlag>1</loadFlag>\r
+ </plugin>\r
+ <plugin>\r
+ <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>\r
+ <loadFlag>1</loadFlag>\r
+ </plugin>\r
+ </debuggerPlugins>\r
+ </configuration>\r
</project>\r
\r
\r
<data/>\r
</settings>\r
</configuration>\r
+ <configuration>\r
+ <name>Full-with-optimisation</name>\r
+ <toolchain>\r
+ <name>ARM</name>\r
+ </toolchain>\r
+ <debug>1</debug>\r
+ <settings>\r
+ <name>General</name>\r
+ <archiveVersion>3</archiveVersion>\r
+ <data>\r
+ <version>18</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>ExePath</name>\r
+ <state>Full-with-optimisation\Exe</state>\r
+ </option>\r
+ <option>\r
+ <name>ObjPath</name>\r
+ <state>Full-with-optimisation\Obj</state>\r
+ </option>\r
+ <option>\r
+ <name>ListPath</name>\r
+ <state>Full-with-optimisation\List</state>\r
+ </option>\r
+ <option>\r
+ <name>Variant</name>\r
+ <version>17</version>\r
+ <state>37</state>\r
+ </option>\r
+ <option>\r
+ <name>GEndianMode</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>Input variant</name>\r
+ <version>1</version>\r
+ <state>3</state>\r
+ </option>\r
+ <option>\r
+ <name>Input description</name>\r
+ <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>\r
+ </option>\r
+ <option>\r
+ <name>Output variant</name>\r
+ <version>0</version>\r
+ <state>3</state>\r
+ </option>\r
+ <option>\r
+ <name>Output description</name>\r
+ <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>\r
+ </option>\r
+ <option>\r
+ <name>GOutputBinary</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>FPU</name>\r
+ <version>1</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OGCoreOrChip</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>GRuntimeLibSelect</name>\r
+ <version>0</version>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>GRuntimeLibSelectSlave</name>\r
+ <version>0</version>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>RTDescription</name>\r
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>\r
+ </option>\r
+ <option>\r
+ <name>OGProductVersion</name>\r
+ <state>6.10.1.52170</state>\r
+ </option>\r
+ <option>\r
+ <name>OGLastSavedByProductVersion</name>\r
+ <state>6.10.1.52170</state>\r
+ </option>\r
+ <option>\r
+ <name>GeneralEnableMisra</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>GeneralMisraVerbose</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OGChipSelectEditMenu</name>\r
+ <state>A2F200M3F Actel A2F200M3F</state>\r
+ </option>\r
+ <option>\r
+ <name>GenLowLevelInterface</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>GEndianModeBE</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OGBufferedTerminalOutput</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>GenStdoutInterface</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>GeneralMisraRules98</name>\r
+ <version>0</version>\r
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>\r
+ </option>\r
+ <option>\r
+ <name>GeneralMisraVer</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>GeneralMisraRules04</name>\r
+ <version>0</version>\r
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>\r
+ </option>\r
+ <option>\r
+ <name>RTConfigPath2</name>\r
+ <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>ICCARM</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>26</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>CCDefines</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CCPreprocFile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPreprocComments</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPreprocLine</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCListCFile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCListCMnemonics</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCListCMessages</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCListAssFile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCListAssSource</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCEnableRemarks</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCDiagSuppress</name>\r
+ <state>Pa082, Pe1644, Pa039, Pa050, pe191</state>\r
+ </option>\r
+ <option>\r
+ <name>CCDiagRemark</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CCDiagWarning</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CCDiagError</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CCObjPrefix</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CCAllowList</name>\r
+ <version>1</version>\r
+ <state>1111111</state>\r
+ </option>\r
+ <option>\r
+ <name>CCDebugInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IEndianMode</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IProcessor</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IExtraOptionsCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IExtraOptions</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CCLangConformance</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCSignedPlainChar</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRequirePrototypes</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCMultibyteSupport</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCDiagWarnAreErr</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCompilerRuntimeInfo</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IFpuProcessor</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OutputFile</name>\r
+ <state>$FILE_BNAME$.o</state>\r
+ </option>\r
+ <option>\r
+ <name>CCLibConfigHeader</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>PreInclude</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CompilerMisraOverride</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCIncludePath2</name>\r
+ <state>$PROJ_DIR$/../../Source/include</state>\r
+ <state>$PROJ_DIR$/../../Source/portable/IAR/ARM_CM3</state>\r
+ <state>$PROJ_DIR$</state>\r
+ <state>$PROJ_DIR$/MicroSemi_Code/CMSIS</state>\r
+ <state>$PROJ_DIR$/MicroSemi_Code/drivers/mss_gpio</state>\r
+ <state>$PROJ_DIR$/MicroSemi_Code/drivers/mss_watchdog</state>\r
+ <state>$PROJ_DIR$/WebServer</state>\r
+ <state>$PROJ_DIR$/../Common/ethernet/FreeTCPIP/apps/httpd</state>\r
+ <state>$PROJ_DIR$/../Common/ethernet/FreeTCPIP</state>\r
+ <state>$PROJ_DIR$/../Common/include</state>\r
+ <state>$PROJ_DIR$/MicroSemi_Code/drivers/I2C</state>\r
+ <state>$PROJ_DIR$/MicroSemi_Code/drivers/mss_ethernet_mac</state>\r
+ <state>$PROJ_DIR$/MicroSemi_Code/drivers/mss_timer</state>\r
+ <state>$PROJ_DIR$/MicroSemi_Code/drivers/OLED</state>\r
+ </option>\r
+ <option>\r
+ <name>CCStdIncCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCCodeSection</name>\r
+ <state>.text</state>\r
+ </option>\r
+ <option>\r
+ <name>IInterwork2</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IProcessorMode2</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CCOptLevel</name>\r
+ <state>3</state>\r
+ </option>\r
+ <option>\r
+ <name>CCOptStrategy</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCOptLevelSlave</name>\r
+ <state>3</state>\r
+ </option>\r
+ <option>\r
+ <name>CompilerMisraRules98</name>\r
+ <version>0</version>\r
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>\r
+ </option>\r
+ <option>\r
+ <name>CompilerMisraRules04</name>\r
+ <version>0</version>\r
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPosIndRopi</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPosIndRwpi</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCPosIndNoDynInit</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IccLang</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IccCDialect</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IccAllowVLA</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IccCppDialect</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IccExceptions</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IccRTTI</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IccStaticDestr</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IccRelaxedFpPrecision</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IccCppInlineSemantics</name>\r
+ <state>0</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>AARM</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>8</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>AObjPrefix</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>AEndian</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>ACaseSensitivity</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>MacroChars</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AWarnEnable</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AWarnWhat</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AWarnOne</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>AWarnRange1</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>AWarnRange2</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>ADebug</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>AltRegisterNames</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>ADefines</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>AList</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AListHeader</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>AListing</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>Includes</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>MacDefs</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>MacExps</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>MacExec</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OnlyAssed</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>MultiLine</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>PageLengthCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>PageLength</name>\r
+ <state>80</state>\r
+ </option>\r
+ <option>\r
+ <name>TabSpacing</name>\r
+ <state>8</state>\r
+ </option>\r
+ <option>\r
+ <name>AXRef</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AXRefDefines</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AXRefInternal</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AXRefDual</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AProcessor</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>AFpuProcessor</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>AOutputFile</name>\r
+ <state>$FILE_BNAME$.o</state>\r
+ </option>\r
+ <option>\r
+ <name>AMultibyteSupport</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>ALimitErrorsCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>ALimitErrorsEdit</name>\r
+ <state>100</state>\r
+ </option>\r
+ <option>\r
+ <name>AIgnoreStdInclude</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AUserIncludes</name>\r
+ <state>$PROJ_DIR$</state>\r
+ </option>\r
+ <option>\r
+ <name>AExtraOptionsCheckV2</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>AExtraOptionsV2</name>\r
+ <state></state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>OBJCOPY</name>\r
+ <archiveVersion>0</archiveVersion>\r
+ <data>\r
+ <version>1</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>OOCOutputFormat</name>\r
+ <version>2</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCOutputOverride</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OOCOutputFile</name>\r
+ <state>RTOSDemo_IAR.srec</state>\r
+ </option>\r
+ <option>\r
+ <name>OOCCommandLineProducer</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OOCObjCopyEnable</name>\r
+ <state>0</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>CUSTOM</name>\r
+ <archiveVersion>3</archiveVersion>\r
+ <data>\r
+ <extensions></extensions>\r
+ <cmdline></cmdline>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>BICOMP</name>\r
+ <archiveVersion>0</archiveVersion>\r
+ <data/>\r
+ </settings>\r
+ <settings>\r
+ <name>BUILDACTION</name>\r
+ <archiveVersion>1</archiveVersion>\r
+ <data>\r
+ <prebuild></prebuild>\r
+ <postbuild></postbuild>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>ILINK</name>\r
+ <archiveVersion>0</archiveVersion>\r
+ <data>\r
+ <version>11</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>IlinkLibIOConfig</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>XLinkMisraHandler</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkInputFileSlave</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkOutputFile</name>\r
+ <state>RTOSDemo_IAR.out</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkDebugInfoEnable</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkKeepSymbols</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkRawBinaryFile</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkRawBinarySymbol</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkRawBinarySegment</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkRawBinaryAlign</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkDefines</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkConfigDefines</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkMapFile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLogFile</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLogInitialization</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLogModule</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLogSection</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLogVeneer</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkIcfOverride</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkIcfFile</name>\r
+ <state>$PROJ_DIR$\IAR_System\linker_nvm.icf</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkIcfFileSlave</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkEnableRemarks</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkSuppressDiags</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkTreatAsRem</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkTreatAsWarn</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkTreatAsErr</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkWarningsAreErrors</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkUseExtraOptions</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkExtraOptions</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLowLevelInterfaceSlave</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkAutoLibEnable</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkAdditionalLibs</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkOverrideProgramEntryLabel</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkProgramEntryLabelSelect</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkProgramEntryLabel</name>\r
+ <state>__iar_program_start</state>\r
+ </option>\r
+ <option>\r
+ <name>DoFill</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>FillerByte</name>\r
+ <state>0xFF</state>\r
+ </option>\r
+ <option>\r
+ <name>FillerStart</name>\r
+ <state>0x0</state>\r
+ </option>\r
+ <option>\r
+ <name>FillerEnd</name>\r
+ <state>0x0</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcSize</name>\r
+ <version>0</version>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcAlign</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcAlgo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcPoly</name>\r
+ <state>0x11021</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcCompl</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcBitOrder</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcInitialValue</name>\r
+ <state>0x0</state>\r
+ </option>\r
+ <option>\r
+ <name>DoCrc</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkBE8Slave</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkBufferedTerminalOutput</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkStdoutInterfaceSlave</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcFullSize</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkIElfToolPostProcess</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLogAutoLibSelect</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLogRedirSymbols</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkLogUnusedFragments</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkCrcReverseByteOrder</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkCrcUseAsInput</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkOptInline</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkOptExceptionsAllow</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkOptExceptionsForce</name>\r
+ <state>0</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>IARCHIVE</name>\r
+ <archiveVersion>0</archiveVersion>\r
+ <data>\r
+ <version>0</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>IarchiveInputs</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IarchiveOverride</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IarchiveOutput</name>\r
+ <state>###Unitialized###</state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
+ <settings>\r
+ <name>BILINK</name>\r
+ <archiveVersion>0</archiveVersion>\r
+ <data/>\r
+ </settings>\r
+ </configuration>\r
<group>\r
<name>Common_Demo_Source</name>\r
<excluded>\r
<name>$PROJ_DIR$\main-blinky.c</name>\r
<excluded>\r
<configuration>Full</configuration>\r
+ <configuration>Full-with-optimisation</configuration>\r
</excluded>\r
</file>\r
<file>\r
( void ) arg;\r
\r
/* Are the dynamically setable LEDs currently on or off? */\r
- if( lParTestGetLEDState( 8 ) )\r
+ if( lParTestGetLEDState( 3 ) )\r
{\r
pcStatus = "checked";\r
}\r
* is ever discovered. The check timer callback toggles the LED defined by\r
* the mainCHECK_LED definition each time it executes. Therefore, if LED\r
* mainCHECK_LED is toggling every three seconds, then no error have been found.\r
- * If LED mainCHECK_LED is toggling every 500ms, then at least one error has\r
+ * If LED mainCHECK_LED is toggling every 500ms, then at least one errors has\r
* been found. The task in which the error was discovered is displayed at the\r
* bottom of the "task stats" page that is served by the embedded web server.\r
*\r
}\r
/*-----------------------------------------------------------*/\r
\r
-void vApplicationProcessFormInput( char *pcInputString )\r
-{\r
-char *c;\r
-\r
- /* Only interested in processing form input if this is the IO page. */\r
- c = strstr( pcInputString, "io.shtml" );\r
- \r
- if( c )\r
- {\r
- /* Is there a command in the string? */\r
- c = strstr( pcInputString, "?" );\r
- if( c )\r
- {\r
- /* Turn the LED's on or off in accordance with the check box status. */\r
- if( strstr( c, "LED0=1" ) != NULL )\r
- {\r
- /* Turn the LEDs on. */\r
- vParTestSetLED( 7, 1 );\r
- vParTestSetLED( 8, 1 );\r
- vParTestSetLED( 9, 1 );\r
- vParTestSetLED( 10, 1 );\r
- }\r
- else\r
- {\r
- /* Turn the LEDs off. */\r
- vParTestSetLED( 7, 0 );\r
- vParTestSetLED( 8, 0 );\r
- vParTestSetLED( 9, 0 );\r
- vParTestSetLED( 10, 0 );\r
- }\r
- }\r
- else\r
- {\r
- /* Commands to turn LEDs off are not always explicit. */\r
- vParTestSetLED( 7, 0 );\r
- vParTestSetLED( 8, 0 );\r
- vParTestSetLED( 9, 0 );\r
- vParTestSetLED( 10, 0 );\r
- }\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
static void prvInitialise_uIP( void )\r
{\r
uip_ipaddr_t xIPAddr;\r
static void prvEMACEventListener( unsigned long ulISREvents )\r
{\r
long lHigherPriorityTaskWoken = pdFALSE;\r
-unsigned long ulUIPEvents = 0UL;\r
+const unsigned long ulRxEvent = uipETHERNET_RX_EVENT;\r
\r
/* Sanity check that the event queue was indeed created. */\r
configASSERT( xEMACEventQueue );\r
if( ( ulISREvents & MSS_MAC_EVENT_PACKET_SEND ) != 0UL )\r
{\r
/* An Ethernet Tx event has occurred. */\r
- MSS_MAC_CheckTxBufferStatus();\r
+ MSS_MAC_FreeTxBuffers();\r
}\r
\r
if( ( ulISREvents & MSS_MAC_EVENT_PACKET_RECEIVED ) != 0UL )\r
{\r
/* An Ethernet Rx event has occurred. */\r
- ulUIPEvents |= uipETHERNET_RX_EVENT;\r
- }\r
-\r
- if( ulUIPEvents != 0UL )\r
- {\r
- /* Send any events that have occurred to the uIP stack (the uIP task in\r
- this case). */\r
- xQueueSendFromISR( xEMACEventQueue, &ulUIPEvents, &lHigherPriorityTaskWoken );\r
+ xQueueSendFromISR( xEMACEventQueue, &ulRxEvent, &lHigherPriorityTaskWoken );\r
}\r
\r
portEND_SWITCHING_ISR( lHigherPriorityTaskWoken );\r
}\r
}\r
/*-----------------------------------------------------------*/\r
+\r
+void vApplicationProcessFormInput( char *pcInputString )\r
+{\r
+char *c;\r
+\r
+ /* Only interested in processing form input if this is the IO page. */\r
+ c = strstr( pcInputString, "io.shtml" );\r
+ \r
+ if( c )\r
+ {\r
+ /* Is there a command in the string? */\r
+ c = strstr( pcInputString, "?" );\r
+ if( c )\r
+ {\r
+ /* Turn the LED's on or off in accordance with the check box status. */\r
+ if( strstr( c, "LED0=1" ) != NULL )\r
+ {\r
+ /* Turn the LEDs on. */\r
+ vParTestSetLED( 3, 1 );\r
+ vParTestSetLED( 4, 1 );\r
+ }\r
+ else\r
+ {\r
+ /* Turn the LEDs off. */\r
+ vParTestSetLED( 3, 0 );\r
+ vParTestSetLED( 4, 0 );\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* Commands to turn LEDs off are not always explicit. */\r
+ vParTestSetLED( 3, 0 );\r
+ vParTestSetLED( 4, 0 );\r
+ }\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
projects / freertos / commitdiff