-\r
-2008-01-21 :\r
- xscale big-endian branch closed and all changes moved to\r
- trunk.\r
-\r
+
+2008-01-21 :
+ xscale big-endian branch closed and all changes moved to
+ trunk.
+
-#daemon configuration\r
-telnet_port 4444\r
-gdb_port 3333\r
-\r
-#interface\r
-interface ft2232\r
-ft2232_device_desc "Stellaris Evaluation Board A"\r
-ft2232_layout evb_lm3s811\r
-ft2232_vid_pid 0x0403 0xbcd9\r
-jtag_speed 40\r
-#LM3S811 Evaluation Board has only srst\r
-reset_config srst_only separate\r
-\r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#target configuration\r
-daemon_startup attach\r
-#target <type> <startup mode>\r
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>\r
-target cortex_m3 little run_and_halt 0\r
-# 4k working area at base of ram\r
-working_area 0 0x20000800 0x1200 nobackup\r
-#target_script 0 reset ../doc/scripts/evb_lm3s811_test.script \r
-\r
-#flash configuration\r
-flash bank stellaris 0 0 0 0 0\r
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+#interface
+interface ft2232
+ft2232_device_desc "Stellaris Evaluation Board A"
+ft2232_layout evb_lm3s811
+ft2232_vid_pid 0x0403 0xbcd9
+jtag_speed 40
+#LM3S811 Evaluation Board has only srst
+reset_config srst_only separate
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup attach
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target cortex_m3 little run_and_halt 0
+# 4k working area at base of ram
+working_area 0 0x20000800 0x1200 nobackup
+#target_script 0 reset ../doc/scripts/evb_lm3s811_test.script
+
+#flash configuration
+flash bank stellaris 0 0 0 0 0
-# Resets and unlocks the MSM of TMS470R1A288 (an others with an MSM).\r
-# Assumes default MSM keys (all 0xFFFFFFFF).\r
-#\r
-resume\r
-jtag_reset 0 1\r
-halt\r
-jtag_reset 0 0\r
-poll # hack-ish, but effective version of 'reset halt'\r
-mdw 0x1fe0 4 # unlock MSM\r
+# Resets and unlocks the MSM of TMS470R1A288 (an others with an MSM).
+# Assumes default MSM keys (all 0xFFFFFFFF).
+#
+resume
+jtag_reset 0 1
+halt
+jtag_reset 0 0
+poll # hack-ish, but effective version of 'reset halt'
+mdw 0x1fe0 4 # unlock MSM
-1. GDB startup script for debugging purposes.\r
-\r
-# startup script for debugging flash erase\r
-target remote 10.0.0.56:2001\r
-monitor halt\r
-monitor reset\r
-load\r
-# stack\r
-monitor rm 13 0x7000\r
-# pc \r
-monitor rm 15 0x8000\r
-# arg1 to erase()\r
-monitor rm 0 0x1030000\r
-# arg2 to erase()\r
-monitor rm 1 0x10000\r
-stepi\r
-\r
-\r
-\r
-2. Uploading flash driver via tftp\r
-\r
-\r
-$ tftp 10.0.0.108\r
-tftp> binary\r
-tftp> put at91fr40162.bin 10.0.0.108:/config/flashdriver.bin\r
-Sent 4048 bytes in 0.1 seconds\r
-tftp>\r
-\r
-\r
-4. Programming flash\r
-\r
-eCosBoard_prog 0x1000000 /config/testdata.bin\r
- \r
- \r
-tftp> put /cygdrive/c/workspace/ecosboard/ecosboard/phi/bootloader/images/bootloader.bin 10.0.0.108:/config/test.bin\r
-Sent 165724 bytes in 3.9 seconds\r
-\r
-\r
-halt\r
-reg cpsr 0x000000D3\r
-mww 0xFFE00020 0x1\r
-mww 0xFFE00024 0x00000000\r
-mww 0xFFE00000 0x01002539\r
-eCosBoard_profile\r
-eCosBoard_prog /config/test.bin 0x1000000\r
-eCosBoard_profile_done\r
-\r
-\r
-\r
-\r
-set remote memory-write-packet-size fixed\r
-\r
-\r
-set remote memory-write-packet-size 8192\r
-set remote memory-map-packet on\r
-target remote 10.0.0.108:3333\r
-monitor halt\r
-monitor reg cpsr 0x000000D3\r
-monitor mww 0xFFE00020 0x1\r
-monitor mww 0xFFE00024 0x00000000\r
-monitor mww 0xFFE00000 0x01002539\r
-\r
-\r
-monitor eCosBoard_profile\r
-load\r
-monitor eCosBoard_profile_done\r
-\r
-\r
-source /tmp/ecosboard/packages/services/profile/gprof/current/host/gprof.gdb\r
-gprof_dump\r
-shell cp gmon.out /tmp/ecosboard/build/src\r
-echo To view: cd /tmp/ecosboard/build/src && gprof openocd\r
-\r
-\r
-Performance problems:\r
-\r
-It seems the problem is that the actual flash programming takes time. \r
-hal_delay_us() is invoked between each time the \r
-CPU is polled for whether flash programming has completed.\r
-\r
-\r
-Flat profile:\r
-\r
-Each sample counts as 0.01 seconds.\r
- % cumulative self self total\r
- time seconds seconds calls Ts/call Ts/call name\r
- 35.82 37.66 37.66 hal_delay_us\r
- 11.90 50.17 12.51 arm7tdmi_clock_out\r
- 9.86 60.54 10.37 gdb_get_packet\r
- 5.36 66.17 5.63 memcpy\r
- 4.34 70.73 4.56 target_buffer_get_u32\r
- 3.34 74.25 3.51 embeddedice_read_reg_w_che\r
-ck\r
- 1.39 75.71 1.46 arm7_9_write_memory\r
- 1.34 77.11 1.40 cyg_tcp_output\r
- 1.33 78.51 1.40 __udivsi3\r
- 1.11 79.68 1.17 cyg_tcp_input\r
- 1.07 80.80 1.13 arm7tdmi_store_word_regs\r
- 0.95 81.81 1.00 __udivdi3\r
- 0.95 82.80 1.00 __umodsi3\r
- 0.93 83.78 0.98 arm7tdmi_write_core_regs\r
- 0.86 84.68 0.91 arm7_9_poll\r
- 0.85 85.57 0.89 memset\r
- 0.77 86.38 0.81 cyg_splx\r
- 0.64 87.05 0.67 cyg_in_cksumdata\r
- 0.63 87.71 0.66 openeth_deliver\r
- 0.57 88.31 0.60 strstr\r
- 0.51 88.85 0.53 eth_drv_recv\r
- 0.49 89.36 0.52 cyg_splinternal\r
- 0.49 89.88 0.52 cyg_splimp\r
+1. GDB startup script for debugging purposes.
+
+# startup script for debugging flash erase
+target remote 10.0.0.56:2001
+monitor halt
+monitor reset
+load
+# stack
+monitor rm 13 0x7000
+# pc
+monitor rm 15 0x8000
+# arg1 to erase()
+monitor rm 0 0x1030000
+# arg2 to erase()
+monitor rm 1 0x10000
+stepi
+
+
+
+2. Uploading flash driver via tftp
+
+
+$ tftp 10.0.0.108
+tftp> binary
+tftp> put at91fr40162.bin 10.0.0.108:/config/flashdriver.bin
+Sent 4048 bytes in 0.1 seconds
+tftp>
+
+
+4. Programming flash
+
+eCosBoard_prog 0x1000000 /config/testdata.bin
+
+
+tftp> put /cygdrive/c/workspace/ecosboard/ecosboard/phi/bootloader/images/bootloader.bin 10.0.0.108:/config/test.bin
+Sent 165724 bytes in 3.9 seconds
+
+
+halt
+reg cpsr 0x000000D3
+mww 0xFFE00020 0x1
+mww 0xFFE00024 0x00000000
+mww 0xFFE00000 0x01002539
+eCosBoard_profile
+eCosBoard_prog /config/test.bin 0x1000000
+eCosBoard_profile_done
+
+
+
+
+set remote memory-write-packet-size fixed
+
+
+set remote memory-write-packet-size 8192
+set remote memory-map-packet on
+target remote 10.0.0.108:3333
+monitor halt
+monitor reg cpsr 0x000000D3
+monitor mww 0xFFE00020 0x1
+monitor mww 0xFFE00024 0x00000000
+monitor mww 0xFFE00000 0x01002539
+
+
+monitor eCosBoard_profile
+load
+monitor eCosBoard_profile_done
+
+
+source /tmp/ecosboard/packages/services/profile/gprof/current/host/gprof.gdb
+gprof_dump
+shell cp gmon.out /tmp/ecosboard/build/src
+echo To view: cd /tmp/ecosboard/build/src && gprof openocd
+
+
+Performance problems:
+
+It seems the problem is that the actual flash programming takes time.
+hal_delay_us() is invoked between each time the
+CPU is polled for whether flash programming has completed.
+
+
+Flat profile:
+
+Each sample counts as 0.01 seconds.
+ % cumulative self self total
+ time seconds seconds calls Ts/call Ts/call name
+ 35.82 37.66 37.66 hal_delay_us
+ 11.90 50.17 12.51 arm7tdmi_clock_out
+ 9.86 60.54 10.37 gdb_get_packet
+ 5.36 66.17 5.63 memcpy
+ 4.34 70.73 4.56 target_buffer_get_u32
+ 3.34 74.25 3.51 embeddedice_read_reg_w_che
+ck
+ 1.39 75.71 1.46 arm7_9_write_memory
+ 1.34 77.11 1.40 cyg_tcp_output
+ 1.33 78.51 1.40 __udivsi3
+ 1.11 79.68 1.17 cyg_tcp_input
+ 1.07 80.80 1.13 arm7tdmi_store_word_regs
+ 0.95 81.81 1.00 __udivdi3
+ 0.95 82.80 1.00 __umodsi3
+ 0.93 83.78 0.98 arm7tdmi_write_core_regs
+ 0.86 84.68 0.91 arm7_9_poll
+ 0.85 85.57 0.89 memset
+ 0.77 86.38 0.81 cyg_splx
+ 0.64 87.05 0.67 cyg_in_cksumdata
+ 0.63 87.71 0.66 openeth_deliver
+ 0.57 88.31 0.60 strstr
+ 0.51 88.85 0.53 eth_drv_recv
+ 0.49 89.36 0.52 cyg_splinternal
+ 0.49 89.88 0.52 cyg_splimp
0.46 90.36 0.48 cyg_ip_input
\ No newline at end of file
-/***************************************************************************\r
- * Copyright (C) 2008 Øyvind Harboe *\r
- * oyvind.harboe@zylin.com *\r
- * *\r
- * This program is free software; you can redistribute it and/or modify *\r
- * it under the terms of the GNU General Public License as published by *\r
- * the Free Software Foundation; either version 2 of the License, or *\r
- * (at your option) any later version. *\r
- * *\r
- * This program is distributed in the hope that it will be useful, *\r
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *\r
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *\r
- * GNU General Public License for more details. *\r
- * *\r
- * You should have received a copy of the GNU General Public License *\r
- * along with this program; if not, write to the *\r
- * Free Software Foundation, Inc., *\r
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *\r
- ***************************************************************************/\r
-#ifdef HAVE_CONFIG_H\r
-#include "config.h"\r
-#endif\r
-\r
-#include "replacements.h"\r
-\r
-\r
-#include "flash.h"\r
-\r
-#include "target.h"\r
-\r
-#include "flash.h"\r
-#include "target.h"\r
-#include "log.h"\r
-#include "binarybuffer.h"\r
-#include "../target/embeddedice.h"\r
-#include "types.h"\r
-\r
-\r
-\r
-int ecosflash_register_commands(struct command_context_s *cmd_ctx);\r
-int ecosflash_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);\r
-int ecosflash_erase(struct flash_bank_s *bank, int first, int last);\r
-int ecosflash_protect(struct flash_bank_s *bank, int set, int first, int last);\r
-int ecosflash_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);\r
-int ecosflash_probe(struct flash_bank_s *bank);\r
-int ecosflash_erase_check(struct flash_bank_s *bank);\r
-int ecosflash_protect_check(struct flash_bank_s *bank);\r
-int ecosflash_info(struct flash_bank_s *bank, char *buf, int buf_size);\r
-\r
-u32 ecosflash_get_flash_status(flash_bank_t *bank);\r
-void ecosflash_set_flash_mode(flash_bank_t *bank,int mode);\r
-u32 ecosflash_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout);\r
-int ecosflash_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);\r
-\r
-flash_driver_t ecosflash_flash =\r
-{\r
- .name = "ecosflash",\r
- .register_commands = ecosflash_register_commands,\r
- .flash_bank_command = ecosflash_flash_bank_command,\r
- .erase = ecosflash_erase,\r
- .protect = ecosflash_protect,\r
- .write = ecosflash_write,\r
- .probe = ecosflash_probe,\r
- .auto_probe = ecosflash_probe,\r
- .erase_check = ecosflash_erase_check,\r
- .protect_check = ecosflash_protect_check,\r
- .info = ecosflash_info\r
-};\r
-\r
-typedef struct ecosflash_flash_bank_s\r
-{\r
- struct target_s *target;\r
- working_area_t *write_algorithm;\r
- working_area_t *erase_check_algorithm;\r
- char *driverPath;\r
- u32 start_address;\r
-} ecosflash_flash_bank_t;\r
-\r
-static const int sectorSize=0x10000;\r
-\r
-char *\r
-flash_errmsg(int err);\r
-\r
-#ifndef __ECOS\r
-#define FLASH_ERR_OK 0x00 // No error - operation complete\r
-#define FLASH_ERR_INVALID 0x01 // Invalid FLASH address\r
-#define FLASH_ERR_ERASE 0x02 // Error trying to erase\r
-#define FLASH_ERR_LOCK 0x03 // Error trying to lock/unlock\r
-#define FLASH_ERR_PROGRAM 0x04 // Error trying to program\r
-#define FLASH_ERR_PROTOCOL 0x05 // Generic error\r
-#define FLASH_ERR_PROTECT 0x06 // Device/region is write-protected\r
-#define FLASH_ERR_NOT_INIT 0x07 // FLASH info not yet initialized\r
-#define FLASH_ERR_HWR 0x08 // Hardware (configuration?) problem\r
-#define FLASH_ERR_ERASE_SUSPEND 0x09 // Device is in erase suspend mode\r
-#define FLASH_ERR_PROGRAM_SUSPEND 0x0a // Device is in in program suspend mode\r
-#define FLASH_ERR_DRV_VERIFY 0x0b // Driver failed to verify data\r
-#define FLASH_ERR_DRV_TIMEOUT 0x0c // Driver timed out waiting for device\r
-#define FLASH_ERR_DRV_WRONG_PART 0x0d // Driver does not support device\r
-#define FLASH_ERR_LOW_VOLTAGE 0x0e // Not enough juice to complete job\r
-\r
-\r
-char *\r
-flash_errmsg(int err)\r
-{\r
- switch (err) {\r
- case FLASH_ERR_OK:\r
- return "No error - operation complete";\r
- case FLASH_ERR_ERASE_SUSPEND:\r
- return "Device is in erase suspend state";\r
- case FLASH_ERR_PROGRAM_SUSPEND:\r
- return "Device is in program suspend state";\r
- case FLASH_ERR_INVALID:\r
- return "Invalid FLASH address";\r
- case FLASH_ERR_ERASE:\r
- return "Error trying to erase";\r
- case FLASH_ERR_LOCK:\r
- return "Error trying to lock/unlock";\r
- case FLASH_ERR_PROGRAM:\r
- return "Error trying to program";\r
- case FLASH_ERR_PROTOCOL:\r
- return "Generic error";\r
- case FLASH_ERR_PROTECT:\r
- return "Device/region is write-protected";\r
- case FLASH_ERR_NOT_INIT:\r
- return "FLASH sub-system not initialized";\r
- case FLASH_ERR_DRV_VERIFY:\r
- return "Data verify failed after operation";\r
- case FLASH_ERR_DRV_TIMEOUT:\r
- return "Driver timed out waiting for device";\r
- case FLASH_ERR_DRV_WRONG_PART:\r
- return "Driver does not support device";\r
- case FLASH_ERR_LOW_VOLTAGE:\r
- return "Device reports low voltage";\r
- default:\r
- return "Unknown error";\r
- }\r
-}\r
-#endif\r
-\r
-/* flash bank ecosflash <base> <size> <chip_width> <bus_width> <target#> <driverPath>\r
- */\r
-int ecosflash_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)\r
-{\r
- ecosflash_flash_bank_t *info;\r
- \r
- if (argc < 7)\r
- {\r
- WARNING("incomplete flash_bank ecosflash configuration");\r
- return ERROR_FLASH_BANK_INVALID;\r
- }\r
- \r
- info = malloc(sizeof(ecosflash_flash_bank_t));\r
- if(info == NULL)\r
- {\r
- ERROR("no memory for flash bank info");\r
- exit(-1);\r
- }\r
- bank->driver_priv = info;\r
- info->driverPath=strdup(args[6]);\r
-\r
- // eCos flash sector sizes are not exposed to OpenOCD, use 0x10000 as \r
- // a way to improve impeadance matach between OpenOCD and eCos flash\r
- // driver\r
- int i = 0;\r
- u32 offset = 0;\r
- bank->num_sectors=bank->size/sectorSize;\r
- bank->sectors = malloc(sizeof(flash_sector_t) * bank->num_sectors);\r
- for (i = 0; i < bank->num_sectors; i++)\r
- {\r
- bank->sectors[i].offset = offset;\r
- bank->sectors[i].size = sectorSize;\r
- offset += bank->sectors[i].size;\r
- bank->sectors[i].is_erased = -1;\r
- bank->sectors[i].is_protected = 0;\r
- }\r
- \r
- info->target = get_target_by_num(strtoul(args[5], NULL, 0));\r
- if (info->target == NULL)\r
- {\r
- ERROR("no target '%i' configured", (int)strtoul(args[5], NULL, 0));\r
- exit(-1);\r
- }\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-int loadDriver(ecosflash_flash_bank_t *info)\r
-{\r
- u32 buf_cnt;\r
- u32 image_size;\r
- image_t image; \r
- \r
- image.base_address_set = 0;\r
- image.start_address_set = 0;\r
- target_t *target=info->target;\r
- \r
- if (image_open(&image, info->driverPath, NULL) != ERROR_OK)\r
- {\r
- ERROR("load_image error: %s", image.error_str);\r
- return ERROR_FLASH_BANK_INVALID;\r
- }\r
- \r
- info->start_address=image.start_address;\r
- \r
- image_size = 0x0;\r
- int i;\r
- for (i = 0; i < image.num_sections; i++)\r
- {\r
- void *buffer = malloc(image.sections[i].size);\r
- int retval;\r
- if ((retval = image_read_section(&image, i, 0x0, image.sections[i].size, buffer, &buf_cnt)) != ERROR_OK)\r
- {\r
- ERROR("image_read_section failed with error code: %i", retval);\r
- free(buffer);\r
- image_close(&image);\r
- return ERROR_FLASH_BANK_INVALID;\r
- }\r
- target_write_buffer(target, image.sections[i].base_address, buf_cnt, buffer);\r
- image_size += buf_cnt;\r
- DEBUG("%u byte written at address 0x%8.8x", buf_cnt, image.sections[i].base_address);\r
- \r
- free(buffer);\r
- }\r
-\r
- image_close(&image);\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-static int const OFFSET_ERASE=0x0;\r
-static int const OFFSET_ERASE_SIZE=0x8;\r
-static int const OFFSET_FLASH=0xc;\r
-static int const OFFSET_FLASH_SIZE=0x8;\r
-static int const OFFSET_GET_WORKAREA=0x18;\r
-static int const OFFSET_GET_WORKAREA_SIZE=0x4;\r
-\r
-\r
-int runCode(ecosflash_flash_bank_t *info, \r
- u32 codeStart, u32 codeStop, u32 r0, u32 r1, u32 r2, \r
- u32 *result,\r
- // timeout in ms\r
- int timeout)\r
-{\r
- target_t *target=info->target;\r
-\r
- reg_param_t reg_params[3];\r
- armv4_5_algorithm_t armv4_5_info;\r
- armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;\r
- armv4_5_info.core_mode = ARMV4_5_MODE_SVC;\r
- armv4_5_info.core_state = ARMV4_5_STATE_ARM;\r
- \r
- init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);\r
- init_reg_param(®_params[1], "r1", 32, PARAM_OUT);\r
- init_reg_param(®_params[2], "r2", 32, PARAM_OUT);\r
- \r
- buf_set_u32(reg_params[0].value, 0, 32, r0);\r
- buf_set_u32(reg_params[1].value, 0, 32, r1);\r
- buf_set_u32(reg_params[2].value, 0, 32, r2);\r
- \r
- int retval;\r
- if ((retval = target->type->run_algorithm(target, 0, NULL, 3, reg_params,\r
- codeStart,\r
- codeStop, timeout, \r
- &armv4_5_info)) != ERROR_OK)\r
- {\r
- ERROR("error executing eCos flash algorithm");\r
- return retval;\r
- }\r
- \r
- *result=buf_get_u32(reg_params[0].value, 0, 32);\r
- \r
- destroy_reg_param(®_params[0]);\r
- destroy_reg_param(®_params[1]);\r
- destroy_reg_param(®_params[2]);\r
- \r
- return ERROR_OK;\r
-}\r
-\r
-int eCosBoard_erase(ecosflash_flash_bank_t *info, u32 address, u32 len)\r
-{\r
- int retval;\r
- int timeout = (len / 20480 + 1) * 1000; /*asume 20 KB/s*/ \r
-\r
- retval=loadDriver(info);\r
- if (retval!=ERROR_OK)\r
- return retval;\r
- \r
- u32 flashErr;\r
- retval=runCode(info, \r
- info->start_address+OFFSET_ERASE,\r
- info->start_address+OFFSET_ERASE+OFFSET_ERASE_SIZE,\r
- address,\r
- len,\r
- 0,\r
- &flashErr,\r
- timeout\r
- );\r
- if (retval!=ERROR_OK)\r
- return retval;\r
- \r
- if (flashErr != 0x0)\r
- {\r
- ERROR("Flash erase failed with %d (%s)\n", flashErr, flash_errmsg(flashErr));\r
- return ERROR_JTAG_DEVICE_ERROR;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int eCosBoard_flash(ecosflash_flash_bank_t *info, void *data, u32 address, u32 len)\r
-{\r
- target_t *target=info->target;\r
- const int chunk=8192;\r
- int retval=ERROR_OK;\r
- int timeout = (chunk / 20480 + 1) * 1000; /*asume 20 KB/s + 1 second*/\r
- \r
- retval=loadDriver(info);\r
- if (retval!=ERROR_OK)\r
- return retval;\r
- \r
- u32 buffer;\r
- retval=runCode(info, \r
- info->start_address+OFFSET_GET_WORKAREA,\r
- info->start_address+OFFSET_GET_WORKAREA+OFFSET_GET_WORKAREA_SIZE,\r
- 0,\r
- 0,\r
- 0,\r
- &buffer,\r
- 1000);\r
- if (retval!=ERROR_OK)\r
- return retval;\r
- \r
- \r
- int i;\r
- for (i=0; i<len; i+=chunk)\r
- {\r
- int t=len-i;\r
- if (t>chunk)\r
- {\r
- t=chunk;\r
- }\r
- \r
- int retval;\r
- retval=target_write_buffer(target, buffer, t, ((char *)data)+i);\r
- if (retval != ERROR_OK)\r
- return retval;\r
- \r
- u32 flashErr;\r
- retval=runCode(info, \r
- info->start_address+OFFSET_FLASH,\r
- info->start_address+OFFSET_FLASH+OFFSET_FLASH_SIZE,\r
- buffer,\r
- address+i,\r
- t,\r
- &flashErr,\r
- timeout);\r
- if (retval != ERROR_OK)\r
- return retval;\r
-\r
- if (flashErr != 0x0)\r
- {\r
- ERROR("Flash prog failed with %d (%s)\n", flashErr, flash_errmsg(flashErr));\r
- return ERROR_JTAG_DEVICE_ERROR;\r
- }\r
- }\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-int ecosflash_probe(struct flash_bank_s *bank)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-int ecosflash_register_commands(struct command_context_s *cmd_ctx)\r
-{\r
- register_command(cmd_ctx, NULL, "ecosflash", NULL, COMMAND_ANY, NULL);\r
- \r
- return ERROR_OK;\r
-}\r
-\r
-/*\r
-static void command(flash_bank_t *bank, u8 cmd, u8 *cmd_buf)\r
-{\r
- ecosflash_flash_bank_t *info = bank->driver_priv;\r
- int i;\r
- \r
- if (info->target->endianness == TARGET_LITTLE_ENDIAN)\r
- {\r
- for (i = bank->bus_width; i > 0; i--)\r
- {\r
- *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;\r
- }\r
- }\r
- else\r
- {\r
- for (i = 1; i <= bank->bus_width; i++)\r
- {\r
- *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;\r
- }\r
- }\r
-}\r
-*/\r
-\r
-u32 ecosflash_address(struct flash_bank_s *bank, u32 address)\r
-{\r
- u32 retval = 0;\r
- switch(bank->bus_width)\r
- {\r
- case 4:\r
- retval = address & 0xfffffffc;\r
- case 2:\r
- retval = address & 0xfffffffe;\r
- case 1:\r
- retval = address;\r
- }\r
- \r
- return retval + bank->base;\r
-} \r
-\r
-\r
-int ecosflash_erase(struct flash_bank_s *bank, int first, int last)\r
-{\r
- struct flash_bank_s *c=bank;\r
- ecosflash_flash_bank_t *info = bank->driver_priv;\r
- return eCosBoard_erase(info, c->base+first*sectorSize, sectorSize*(last-first+1)); \r
-}\r
-\r
-int ecosflash_protect(struct flash_bank_s *bank, int set, int first, int last)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-int ecosflash_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)\r
-{\r
- ecosflash_flash_bank_t *info = bank->driver_priv;\r
- struct flash_bank_s *c=bank;\r
- return eCosBoard_flash(info, buffer, c->base+offset, count);\r
-}\r
-\r
-\r
-int ecosflash_erase_check(struct flash_bank_s *bank)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-int ecosflash_protect_check(struct flash_bank_s *bank)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-int ecosflash_info(struct flash_bank_s *bank, char *buf, int buf_size)\r
-{\r
- ecosflash_flash_bank_t *info = bank->driver_priv;\r
- snprintf(buf, buf_size, "eCos flash driver: %s", info->driverPath);\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-u32 ecosflash_get_flash_status(flash_bank_t *bank)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-void ecosflash_set_flash_mode(flash_bank_t *bank,int mode)\r
-{\r
- \r
-}\r
-\r
-u32 ecosflash_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-int ecosflash_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-\r
-\r
+/***************************************************************************
+ * Copyright (C) 2008 Øyvind Harboe *
+ * oyvind.harboe@zylin.com *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+
+#include "flash.h"
+
+#include "target.h"
+
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "binarybuffer.h"
+#include "../target/embeddedice.h"
+#include "types.h"
+
+
+
+int ecosflash_register_commands(struct command_context_s *cmd_ctx);
+int ecosflash_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int ecosflash_erase(struct flash_bank_s *bank, int first, int last);
+int ecosflash_protect(struct flash_bank_s *bank, int set, int first, int last);
+int ecosflash_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int ecosflash_probe(struct flash_bank_s *bank);
+int ecosflash_erase_check(struct flash_bank_s *bank);
+int ecosflash_protect_check(struct flash_bank_s *bank);
+int ecosflash_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+u32 ecosflash_get_flash_status(flash_bank_t *bank);
+void ecosflash_set_flash_mode(flash_bank_t *bank,int mode);
+u32 ecosflash_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout);
+int ecosflash_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t ecosflash_flash =
+{
+ .name = "ecosflash",
+ .register_commands = ecosflash_register_commands,
+ .flash_bank_command = ecosflash_flash_bank_command,
+ .erase = ecosflash_erase,
+ .protect = ecosflash_protect,
+ .write = ecosflash_write,
+ .probe = ecosflash_probe,
+ .auto_probe = ecosflash_probe,
+ .erase_check = ecosflash_erase_check,
+ .protect_check = ecosflash_protect_check,
+ .info = ecosflash_info
+};
+
+typedef struct ecosflash_flash_bank_s
+{
+ struct target_s *target;
+ working_area_t *write_algorithm;
+ working_area_t *erase_check_algorithm;
+ char *driverPath;
+ u32 start_address;
+} ecosflash_flash_bank_t;
+
+static const int sectorSize=0x10000;
+
+char *
+flash_errmsg(int err);
+
+#ifndef __ECOS
+#define FLASH_ERR_OK 0x00 // No error - operation complete
+#define FLASH_ERR_INVALID 0x01 // Invalid FLASH address
+#define FLASH_ERR_ERASE 0x02 // Error trying to erase
+#define FLASH_ERR_LOCK 0x03 // Error trying to lock/unlock
+#define FLASH_ERR_PROGRAM 0x04 // Error trying to program
+#define FLASH_ERR_PROTOCOL 0x05 // Generic error
+#define FLASH_ERR_PROTECT 0x06 // Device/region is write-protected
+#define FLASH_ERR_NOT_INIT 0x07 // FLASH info not yet initialized
+#define FLASH_ERR_HWR 0x08 // Hardware (configuration?) problem
+#define FLASH_ERR_ERASE_SUSPEND 0x09 // Device is in erase suspend mode
+#define FLASH_ERR_PROGRAM_SUSPEND 0x0a // Device is in in program suspend mode
+#define FLASH_ERR_DRV_VERIFY 0x0b // Driver failed to verify data
+#define FLASH_ERR_DRV_TIMEOUT 0x0c // Driver timed out waiting for device
+#define FLASH_ERR_DRV_WRONG_PART 0x0d // Driver does not support device
+#define FLASH_ERR_LOW_VOLTAGE 0x0e // Not enough juice to complete job
+
+
+char *
+flash_errmsg(int err)
+{
+ switch (err) {
+ case FLASH_ERR_OK:
+ return "No error - operation complete";
+ case FLASH_ERR_ERASE_SUSPEND:
+ return "Device is in erase suspend state";
+ case FLASH_ERR_PROGRAM_SUSPEND:
+ return "Device is in program suspend state";
+ case FLASH_ERR_INVALID:
+ return "Invalid FLASH address";
+ case FLASH_ERR_ERASE:
+ return "Error trying to erase";
+ case FLASH_ERR_LOCK:
+ return "Error trying to lock/unlock";
+ case FLASH_ERR_PROGRAM:
+ return "Error trying to program";
+ case FLASH_ERR_PROTOCOL:
+ return "Generic error";
+ case FLASH_ERR_PROTECT:
+ return "Device/region is write-protected";
+ case FLASH_ERR_NOT_INIT:
+ return "FLASH sub-system not initialized";
+ case FLASH_ERR_DRV_VERIFY:
+ return "Data verify failed after operation";
+ case FLASH_ERR_DRV_TIMEOUT:
+ return "Driver timed out waiting for device";
+ case FLASH_ERR_DRV_WRONG_PART:
+ return "Driver does not support device";
+ case FLASH_ERR_LOW_VOLTAGE:
+ return "Device reports low voltage";
+ default:
+ return "Unknown error";
+ }
+}
+#endif
+
+/* flash bank ecosflash <base> <size> <chip_width> <bus_width> <target#> <driverPath>
+ */
+int ecosflash_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ ecosflash_flash_bank_t *info;
+
+ if (argc < 7)
+ {
+ WARNING("incomplete flash_bank ecosflash configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ info = malloc(sizeof(ecosflash_flash_bank_t));
+ if(info == NULL)
+ {
+ ERROR("no memory for flash bank info");
+ exit(-1);
+ }
+ bank->driver_priv = info;
+ info->driverPath=strdup(args[6]);
+
+ // eCos flash sector sizes are not exposed to OpenOCD, use 0x10000 as
+ // a way to improve impeadance matach between OpenOCD and eCos flash
+ // driver
+ int i = 0;
+ u32 offset = 0;
+ bank->num_sectors=bank->size/sectorSize;
+ bank->sectors = malloc(sizeof(flash_sector_t) * bank->num_sectors);
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = sectorSize;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 0;
+ }
+
+ info->target = get_target_by_num(strtoul(args[5], NULL, 0));
+ if (info->target == NULL)
+ {
+ ERROR("no target '%i' configured", (int)strtoul(args[5], NULL, 0));
+ exit(-1);
+ }
+ return ERROR_OK;
+}
+
+
+int loadDriver(ecosflash_flash_bank_t *info)
+{
+ u32 buf_cnt;
+ u32 image_size;
+ image_t image;
+
+ image.base_address_set = 0;
+ image.start_address_set = 0;
+ target_t *target=info->target;
+
+ if (image_open(&image, info->driverPath, NULL) != ERROR_OK)
+ {
+ ERROR("load_image error: %s", image.error_str);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ info->start_address=image.start_address;
+
+ image_size = 0x0;
+ int i;
+ for (i = 0; i < image.num_sections; i++)
+ {
+ void *buffer = malloc(image.sections[i].size);
+ int retval;
+ if ((retval = image_read_section(&image, i, 0x0, image.sections[i].size, buffer, &buf_cnt)) != ERROR_OK)
+ {
+ ERROR("image_read_section failed with error code: %i", retval);
+ free(buffer);
+ image_close(&image);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+ target_write_buffer(target, image.sections[i].base_address, buf_cnt, buffer);
+ image_size += buf_cnt;
+ DEBUG("%u byte written at address 0x%8.8x", buf_cnt, image.sections[i].base_address);
+
+ free(buffer);
+ }
+
+ image_close(&image);
+
+ return ERROR_OK;
+}
+
+
+static int const OFFSET_ERASE=0x0;
+static int const OFFSET_ERASE_SIZE=0x8;
+static int const OFFSET_FLASH=0xc;
+static int const OFFSET_FLASH_SIZE=0x8;
+static int const OFFSET_GET_WORKAREA=0x18;
+static int const OFFSET_GET_WORKAREA_SIZE=0x4;
+
+
+int runCode(ecosflash_flash_bank_t *info,
+ u32 codeStart, u32 codeStop, u32 r0, u32 r1, u32 r2,
+ u32 *result,
+ // timeout in ms
+ int timeout)
+{
+ target_t *target=info->target;
+
+ reg_param_t reg_params[3];
+ armv4_5_algorithm_t armv4_5_info;
+ armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
+ armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
+ armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
+
+ buf_set_u32(reg_params[0].value, 0, 32, r0);
+ buf_set_u32(reg_params[1].value, 0, 32, r1);
+ buf_set_u32(reg_params[2].value, 0, 32, r2);
+
+ int retval;
+ if ((retval = target->type->run_algorithm(target, 0, NULL, 3, reg_params,
+ codeStart,
+ codeStop, timeout,
+ &armv4_5_info)) != ERROR_OK)
+ {
+ ERROR("error executing eCos flash algorithm");
+ return retval;
+ }
+
+ *result=buf_get_u32(reg_params[0].value, 0, 32);
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+
+ return ERROR_OK;
+}
+
+int eCosBoard_erase(ecosflash_flash_bank_t *info, u32 address, u32 len)
+{
+ int retval;
+ int timeout = (len / 20480 + 1) * 1000; /*asume 20 KB/s*/
+
+ retval=loadDriver(info);
+ if (retval!=ERROR_OK)
+ return retval;
+
+ u32 flashErr;
+ retval=runCode(info,
+ info->start_address+OFFSET_ERASE,
+ info->start_address+OFFSET_ERASE+OFFSET_ERASE_SIZE,
+ address,
+ len,
+ 0,
+ &flashErr,
+ timeout
+ );
+ if (retval!=ERROR_OK)
+ return retval;
+
+ if (flashErr != 0x0)
+ {
+ ERROR("Flash erase failed with %d (%s)\n", flashErr, flash_errmsg(flashErr));
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ return ERROR_OK;
+}
+
+int eCosBoard_flash(ecosflash_flash_bank_t *info, void *data, u32 address, u32 len)
+{
+ target_t *target=info->target;
+ const int chunk=8192;
+ int retval=ERROR_OK;
+ int timeout = (chunk / 20480 + 1) * 1000; /*asume 20 KB/s + 1 second*/
+
+ retval=loadDriver(info);
+ if (retval!=ERROR_OK)
+ return retval;
+
+ u32 buffer;
+ retval=runCode(info,
+ info->start_address+OFFSET_GET_WORKAREA,
+ info->start_address+OFFSET_GET_WORKAREA+OFFSET_GET_WORKAREA_SIZE,
+ 0,
+ 0,
+ 0,
+ &buffer,
+ 1000);
+ if (retval!=ERROR_OK)
+ return retval;
+
+
+ int i;
+ for (i=0; i<len; i+=chunk)
+ {
+ int t=len-i;
+ if (t>chunk)
+ {
+ t=chunk;
+ }
+
+ int retval;
+ retval=target_write_buffer(target, buffer, t, ((char *)data)+i);
+ if (retval != ERROR_OK)
+ return retval;
+
+ u32 flashErr;
+ retval=runCode(info,
+ info->start_address+OFFSET_FLASH,
+ info->start_address+OFFSET_FLASH+OFFSET_FLASH_SIZE,
+ buffer,
+ address+i,
+ t,
+ &flashErr,
+ timeout);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (flashErr != 0x0)
+ {
+ ERROR("Flash prog failed with %d (%s)\n", flashErr, flash_errmsg(flashErr));
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+ }
+ return ERROR_OK;
+}
+
+
+int ecosflash_probe(struct flash_bank_s *bank)
+{
+ return ERROR_OK;
+}
+
+
+int ecosflash_register_commands(struct command_context_s *cmd_ctx)
+{
+ register_command(cmd_ctx, NULL, "ecosflash", NULL, COMMAND_ANY, NULL);
+
+ return ERROR_OK;
+}
+
+/*
+static void command(flash_bank_t *bank, u8 cmd, u8 *cmd_buf)
+{
+ ecosflash_flash_bank_t *info = bank->driver_priv;
+ int i;
+
+ if (info->target->endianness == TARGET_LITTLE_ENDIAN)
+ {
+ for (i = bank->bus_width; i > 0; i--)
+ {
+ *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;
+ }
+ }
+ else
+ {
+ for (i = 1; i <= bank->bus_width; i++)
+ {
+ *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;
+ }
+ }
+}
+*/
+
+u32 ecosflash_address(struct flash_bank_s *bank, u32 address)
+{
+ u32 retval = 0;
+ switch(bank->bus_width)
+ {
+ case 4:
+ retval = address & 0xfffffffc;
+ case 2:
+ retval = address & 0xfffffffe;
+ case 1:
+ retval = address;
+ }
+
+ return retval + bank->base;
+}
+
+
+int ecosflash_erase(struct flash_bank_s *bank, int first, int last)
+{
+ struct flash_bank_s *c=bank;
+ ecosflash_flash_bank_t *info = bank->driver_priv;
+ return eCosBoard_erase(info, c->base+first*sectorSize, sectorSize*(last-first+1));
+}
+
+int ecosflash_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ return ERROR_OK;
+}
+
+
+int ecosflash_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ ecosflash_flash_bank_t *info = bank->driver_priv;
+ struct flash_bank_s *c=bank;
+ return eCosBoard_flash(info, buffer, c->base+offset, count);
+}
+
+
+int ecosflash_erase_check(struct flash_bank_s *bank)
+{
+ return ERROR_OK;
+}
+
+int ecosflash_protect_check(struct flash_bank_s *bank)
+{
+ return ERROR_OK;
+}
+
+int ecosflash_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ ecosflash_flash_bank_t *info = bank->driver_priv;
+ snprintf(buf, buf_size, "eCos flash driver: %s", info->driverPath);
+ return ERROR_OK;
+}
+
+
+u32 ecosflash_get_flash_status(flash_bank_t *bank)
+{
+ return ERROR_OK;
+}
+
+void ecosflash_set_flash_mode(flash_bank_t *bank,int mode)
+{
+
+}
+
+u32 ecosflash_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout)
+{
+ return ERROR_OK;
+}
+
+int ecosflash_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ return ERROR_OK;
+}
+
+
+
+
extern flash_driver_t str9xpec_flash;
extern flash_driver_t stm32x_flash;
extern flash_driver_t tms470_flash;
-extern flash_driver_t ecosflash_flash;\r
+extern flash_driver_t ecosflash_flash;
flash_driver_t *flash_drivers[] =
{
&str9xpec_flash,
&stm32x_flash,
&tms470_flash,
- &ecosflash_flash,\r
+ &ecosflash_flash,
NULL,
};
{
ERROR("invalid flash sector");
retval=ERROR_FLASH_SECTOR_INVALID;
- } else
+ } else
{
retval=bank->driver->erase(bank, first, last);
}
{
ERROR("invalid flash sector");
retval=ERROR_FLASH_SECTOR_INVALID;
- } else
+ } else
{
retval=bank->driver->protect(bank, set, first, last);
}
int flash_register_commands(struct command_context_s *cmd_ctx)
{
flash_cmd = register_command(cmd_ctx, NULL, "flash", NULL, COMMAND_ANY, NULL);
-
+
register_command(cmd_ctx, flash_cmd, "bank", handle_flash_bank_command, COMMAND_CONFIG, "flash_bank <driver> <base> <size> <chip_width> <bus_width> <target> [driver_options ...]");
register_command(cmd_ctx, flash_cmd, "auto_erase", handle_flash_auto_erase_command, COMMAND_ANY,
"auto erase flash sectors <on|off>");
register_command(cmd_ctx, flash_cmd, "protect", handle_flash_protect_command, COMMAND_EXEC,
"set protection of sectors at <bank> <first> <last> <on|off>");
}
-
+
return ERROR_OK;
}
{
flash_bank_t *p = get_flash_bank_by_num_noprobe(num);
int retval;
-
+
if (p == NULL)
return NULL;
-
+
retval = p->driver->auto_probe(p);
-
+
if (retval != ERROR_OK)
{
ERROR("auto_probe failed %d\n", retval);
int i;
int found = 0;
target_t *target;
-
+
if (argc < 6)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
if ((target = get_target_by_num(strtoul(args[5], NULL, 0))) == NULL)
{
ERROR("target %lu not defined", strtoul(args[5], NULL, 0));
return ERROR_OK;
}
-
+
for (i = 0; flash_drivers[i]; i++)
{
if (strcmp(args[0], flash_drivers[i]->name) == 0)
{
flash_bank_t *p, *c;
-
+
/* register flash specific commands */
if (flash_drivers[i]->register_commands(cmd_ctx) != ERROR_OK)
{
ERROR("couldn't register '%s' commands", args[0]);
exit(-1);
}
-
+
c = malloc(sizeof(flash_bank_t));
c->target = target;
c->driver = flash_drivers[i];
c->num_sectors = 0;
c->sectors = NULL;
c->next = NULL;
-
+
if (flash_drivers[i]->flash_bank_command(cmd_ctx, cmd, args, argc, c) != ERROR_OK)
{
ERROR("'%s' driver rejected flash bank at 0x%8.8x", args[0], c->base);
free(c);
return ERROR_OK;
}
-
+
/* put flash bank in linked list */
if (flash_banks)
{
{
flash_banks = c;
}
-
+
found = 1;
}
}
-
+
/* no matching flash driver found */
if (!found)
{
ERROR("flash driver '%s' not found", args[0]);
exit(-1);
}
-
+
return ERROR_OK;
}
{
flash_bank_t *p;
int i = 0;
-
+
if (!flash_banks)
{
command_print(cmd_ctx, "no flash banks configured");
return ERROR_OK;
}
-
+
for (p = flash_banks; p; p = p->next)
{
command_print(cmd_ctx, "#%i: %s at 0x%8.8x, size 0x%8.8x, buswidth %i, chipwidth %i",
i++, p->driver->name, p->base, p->size, p->bus_width, p->chip_width);
}
-
+
return ERROR_OK;
}
flash_bank_t *p;
int i = 0;
int j = 0;
-
+
if (argc != 1)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
for (p = flash_banks; p; p = p->next, i++)
{
if (i == strtoul(args[0], NULL, 0))
{
char buf[1024];
-
+
/* attempt auto probe */
p->driver->auto_probe(p);
-
+
command_print(cmd_ctx, "#%i: %s at 0x%8.8x, size 0x%8.8x, buswidth %i, chipwidth %i",
i, p->driver->name, p->base, p->size, p->bus_width, p->chip_width);
for (j = 0; j < p->num_sectors; j++)
{
char *erase_state, *protect_state;
-
+
if (p->sectors[j].is_erased == 0)
erase_state = "not erased";
else if (p->sectors[j].is_erased == 1)
erase_state = "erased";
else
erase_state = "erase state unknown";
-
+
if (p->sectors[j].is_protected == 0)
protect_state = "not protected";
else if (p->sectors[j].is_protected == 1)
j, p->sectors[j].offset, p->sectors[j].size, p->sectors[j].size>>10,
erase_state, protect_state);
}
-
+
p->driver->info(p, buf, 1024);
command_print(cmd_ctx, "%s", buf);
}
}
-
+
return ERROR_OK;
}
{
flash_bank_t *p;
int retval;
-
+
if (argc != 1)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
p = get_flash_bank_by_num_noprobe(strtoul(args[0], NULL, 0));
if (p)
{
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
}
-
+
return ERROR_OK;
}
{
flash_bank_t *p;
int retval;
-
+
if (argc != 1)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (p)
{
args[0], p->base);
}
}
-
+
return ERROR_OK;
}
int length;
duration_t duration;
char *duration_text;
-
+
target_t *target = get_current_target(cmd_ctx);
if (argc != 2)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
address = strtoul(args[0], NULL, 0);
length = strtoul(args[1], NULL, 0);
if (length <= 0)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
/* We can't know if we did a resume + halt, in which case we no longer know the erased state */
flash_set_dirty();
-
+
duration_start_measure(&duration);
-
+
if ((retval = flash_erase_address_range(target, address, length)) == ERROR_OK)
{
- duration_stop_measure(&duration, &duration_text);
+ duration_stop_measure(&duration, &duration_text);
command_print(cmd_ctx, "erased address 0x%8.8x length %i in %s", address, length, duration_text);
free(duration_text);
}
-
+
return retval;
}
{
flash_bank_t *p;
int retval;
-
+
if (argc != 1)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (p)
{
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
return ERROR_OK;
}
flash_bank_t *p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
duration_t duration;
char *duration_text;
-
+
duration_start_measure(&duration);
-
+
if (!p)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
if ((retval = flash_driver_erase(p, first, last)) == ERROR_OK)
{
- duration_stop_measure(&duration, &duration_text);
-
+ duration_stop_measure(&duration, &duration_text);
+
command_print(cmd_ctx, "erased sectors %i through %i on flash bank %i in %s", first, last, strtoul(args[0], 0, 0), duration_text);
free(duration_text);
}
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
if (strcmp(args[3], "on") == 0)
set = 1;
else if (strcmp(args[3], "off") == 0)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
retval = flash_driver_protect(p, set, first, last);
if (retval == ERROR_OK)
{
int handle_flash_write_image_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
target_t *target = get_current_target(cmd_ctx);
-
+
image_t image;
u32 written;
-
+
duration_t duration;
char *duration_text;
-
+
int retval;
if (argc < 1)
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
if (!target)
{
ERROR("no target selected");
return ERROR_OK;
}
-
+
duration_start_measure(&duration);
-
+
if (argc >= 2)
{
image.base_address_set = 1;
image.base_address_set = 0;
image.base_address = 0x0;
}
-
+
image.start_address_set = 0;
retval = image_open(&image, args[0], (argc == 3) ? args[2] : NULL);
command_print(cmd_ctx, "image_open error: %s", image.error_str);
return retval;
}
-
+
retval = flash_write(target, &image, &written, auto_erase);
if (retval != ERROR_OK)
image_close(&image);
return retval;
}
-
+
duration_stop_measure(&duration, &duration_text);
if (retval == ERROR_OK)
{
free(duration_text);
image_close(&image);
-
+
return retval;
}
u32 buf_cnt;
fileio_t fileio;
-
+
duration_t duration;
char *duration_text;
-
+
int retval;
flash_bank_t *p;
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
duration_start_measure(&duration);
-
+
offset = strtoul(args[2], NULL, 0);
p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!p)
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
if (fileio_open(&fileio, args[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
{
command_print(cmd_ctx, "flash write_binary error: %s", fileio.error_str);
return ERROR_OK;
}
-
+
buffer = malloc(fileio.size);
if (fileio_read(&fileio, fileio.size, buffer, &buf_cnt) != ERROR_OK)
{
command_print(cmd_ctx, "flash write_binary error: %s", fileio.error_str);
return ERROR_OK;
}
-
+
retval = flash_driver_write(p, buffer, offset, buf_cnt);
-
+
free(buffer);
-
+
duration_stop_measure(&duration, &duration_text);
if (retval!=ERROR_OK)
{
free(duration_text);
fileio_close(&fileio);
-
+
return retval;
}
{
flash_bank_t *c;
int i;
-
+
/* set all flash to require erasing */
for (c = flash_banks; c; c = c->next)
{
for (i = 0; i < c->num_sectors; i++)
{
- c->sectors[i].is_erased = 0;
+ c->sectors[i].is_erased = 0;
}
}
}
{
int retval;
retval = c->driver->auto_probe(c);
-
+
if (retval != ERROR_OK)
{
ERROR("auto_probe failed %d\n", retval);
int first = -1;
int last = -1;
int i;
-
+
if ((c = get_flash_bank_by_addr(target, addr)) == NULL)
return ERROR_FLASH_DST_OUT_OF_BANK; /* no corresponding bank found */
if (c->size == 0 || c->num_sectors == 0)
return ERROR_FLASH_BANK_INVALID;
-
+
if (length == 0)
{
/* special case, erase whole bank when length is zero */
if (addr != c->base)
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
-
+
return flash_driver_erase(c, 0, c->num_sectors - 1);
}
/* check whether it fits */
if (addr + length > c->base + c->size)
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
-
+
addr -= c->base;
-
+
for (i = 0; i < c->num_sectors; i++)
- {
+ {
/* check whether sector overlaps with the given range and is not yet erased */
if (addr < c->sectors[i].offset + c->sectors[i].size && addr + length > c->sectors[i].offset && c->sectors[i].is_erased != 1) {
/* if first is not set yet then this is the first sector */
last = i; /* and it is the last one so far in any case */
}
}
-
+
if( first == -1 || last == -1 )
return ERROR_OK;
-
+
return flash_driver_erase(c, first, last);
}
int section;
u32 section_offset;
flash_bank_t *c;
-
+
section = 0;
section_offset = 0;
if (written)
*written = 0;
-
+
if (erase)
{
/* assume all sectors need erasing - stops any problems
* when flash_write is called multiple times */
-
+
flash_set_dirty();
}
-
+
/* loop until we reach end of the image */
while (section < image->num_sections)
{
while (buffer_size < run_size)
{
u32 size_read;
-
+
if (buffer_size - run_size <= image->sections[section].size - section_offset)
size_read = buffer_size - run_size;
else
size_read = image->sections[section].size - section_offset;
-
+
if ((retval = image_read_section(image, section, section_offset,
size_read, buffer + buffer_size, &size_read)) != ERROR_OK || size_read == 0)
{
free(buffer);
-
+
return retval;
}
}
retval = ERROR_OK;
-
+
if (erase)
{
/* calculate and erase sectors */
retval = flash_erase_address_range( target, run_address, run_size );
}
-
+
if (retval == ERROR_OK)
{
/* write flash sectors */
retval = flash_driver_write(c, buffer, run_address - c->base, run_size);
}
-
+
free(buffer);
if (retval != ERROR_OK)
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
if (strcmp(args[0], "on") == 0)
auto_erase = 1;
else if (strcmp(args[0], "off") == 0)
auto_erase = 0;
- else
+ else
return ERROR_COMMAND_SYNTAX_ERROR;
-
+
return ERROR_OK;
}
-INCLUDES = $(all_includes)\r
-METASOURCES = AUTO\r
-AM_CPPFLAGS = -DPKGDATADIR=\"$(pkgdatadir)\" -DPKGLIBDIR=\"$(pkglibdir)\" @CPPFLAGS@\r
-noinst_LIBRARIES = libhelper.a\r
-libhelper_a_SOURCES = binarybuffer.c configuration.c options.c log.c interpreter.c command.c time_support.c \\r
- replacements.c fileio.c\r
-noinst_HEADERS = binarybuffer.h configuration.h types.h log.h command.h \\r
- interpreter.h time_support.h replacements.h fileio.h\r
+INCLUDES = $(all_includes)
+METASOURCES = AUTO
+AM_CPPFLAGS = -DPKGDATADIR=\"$(pkgdatadir)\" -DPKGLIBDIR=\"$(pkglibdir)\" @CPPFLAGS@
+noinst_LIBRARIES = libhelper.a
+libhelper_a_SOURCES = binarybuffer.c configuration.c options.c log.c interpreter.c command.c time_support.c \
+ replacements.c fileio.c
+noinst_HEADERS = binarybuffer.h configuration.h types.h log.h command.h \
+ interpreter.h time_support.h replacements.h fileio.h
if (debug_level >= LOG_DEBUG)
{
/* print with count and time information */
- int t=(int)(time(NULL)-start);\r
- fprintf(log_output, "%s %d %d %s:%d %s(): %s\n", log_strings[level+1], count, t, file, line, function, buffer);\r
+ int t=(int)(time(NULL)-start);
+ fprintf(log_output, "%s %d %d %s:%d %s(): %s\n", log_strings[level+1], count, t, file, line, function, buffer);
}
else
{
}
fflush(log_output);
-
+
/* Never forward LOG_DEBUG, too verbose and they can be found in the log if need be */
if (level <= LOG_INFO)
{
va_start(args, format);
log_printfv(level, file, line, function, format, args);
va_end(args);
-
+
}
void log_printfnl(enum log_levels level, const char *file, int line, const char *function, const char *format, ...)
count++;
if (level > debug_level)
return;
-
+
char *t=malloc(strlen(format)+2);
strcpy(t, format);
strcat(t, "\n");
-
+
va_list args;
va_start(args, format);
log_printfv(level, file, line, function, t, args);
if (argc == 1)
{
FILE* file = fopen(args[0], "w");
-
+
if (file)
{
log_output = file;
/* set defaults for daemon configuration, if not set by cmdline or cfgfile */
if (debug_level == -1)
debug_level = LOG_INFO;
-
+
if (log_output == NULL)
{
log_output = stderr;
}
-
+
return ERROR_OK;
}
-
+
int set_log_output(struct command_context_s *cmd_ctx, FILE *output)
{
log_output = output;
char *alloc_printf(const char *fmt, va_list ap)
{
char *string = NULL;
-
+
/* start by 0 to exercise all the code paths. Need minimum 2 bytes to
* fit 1 char and 0 terminator. */
int size = 0;
return NULL;
}
}
-
+
int ret;
ret = vsnprintf(string, size, fmt, ap);
/* NB! The result of the vsnprintf() might be an *EMPTY* string! */
static unsigned short gdb_port;
static const char *DIGITS = "0123456789abcdef";
-static void gdb_log_callback(void *priv, const char *file, int line,
+static void gdb_log_callback(void *priv, const char *file, int line,
const char *function, const char *format, va_list args);
enum gdb_detach_mode
*/
struct timeval tv;
fd_set read_fds;
-
+
FD_ZERO(&read_fds);
FD_SET(connection->fd, &read_fds);
-
+
tv.tv_sec = 1;
tv.tv_usec = 0;
if (select(connection->fd + 1, &read_fds, NULL, NULL, &tv) == 0)
/* This can typically be because a "monitor" command took too long
* before printing any progress messages
*/
- return ERROR_GDB_TIMEOUT;
+ return ERROR_GDB_TIMEOUT;
}
#endif
gdb_con->buf_cnt = read_socket(connection->fd, gdb_con->buffer, GDB_BUFFER_SIZE);
if (gdb_con->buf_cnt > 0)
connection->input_pending = 1;
else
- connection->input_pending = 0;
+ connection->input_pending = 0;
#ifdef _DEBUG_GDB_IO_
DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
#endif
}
else
{
- ERROR("BUG: couldn't put character back");
+ ERROR("BUG: couldn't put character back");
}
return ERROR_OK;
if (len > 0)
gdb_write(connection, buffer, len);
gdb_write(connection, "#", 1);
-
+
snprintf(checksum, 3, "%2.2x", my_checksum);
-
+
gdb_write(connection, checksum, 2);
#else
void *allocated = NULL;
t[1 + len] = '#';
t[1 + len + 1] = DIGITS[(my_checksum >> 4) & 0xf];
t[1 + len + 2] = DIGITS[my_checksum & 0xf];
-
+
gdb_write(connection, t, totalLen);
-
+
if (allocated)
{
free(allocated);
} while (character != '$');
my_checksum = 0;
-
+
count = 0;
gdb_connection_t *gdb_con = connection->priv;
for (;;)
{
/* The common case is that we have an entire packet with no escape chars.
* We need to leave at least 2 bytes in the buffer to have
- * gdb_get_char() update various bits and bobs correctly.
+ * gdb_get_char() update various bits and bobs correctly.
*/
if ((gdb_con->buf_cnt > 2) && ((gdb_con->buf_cnt+count) < *len))
{
/* The compiler will struggle a bit with constant propagation and
* aliasing, so we help it by showing that these values do not
- * change inside the loop
- */
+ * change inside the loop
+ */
int i;
char *buf = gdb_con->buf_p;
int run = gdb_con->buf_cnt - 2;
i++;
if (character == '#')
{
- /* Danger! character can be '#' when esc is
+ /* Danger! character can be '#' when esc is
* used so we need an explicit boolean for done here.
*/
done = 1;
break;
}
-
+
if (character == '}')
{
/* data transmitted in binary mode (X packet)
}
gdb_con->buf_p += i;
gdb_con->buf_cnt -= i;
- if (done)
+ if (done)
break;
- }
+ }
if (count > *len)
{
ERROR("packet buffer too small");
return ERROR_GDB_BUFFER_TOO_SMALL;
}
-
+
if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
return retval;
gdb_con->busy = 0;
return retval;
}
-
+
int gdb_output_con(connection_t *connection, char* line)
{
char *hex_buffer;
int gdb_output(struct command_context_s *context, char* line)
{
/* this will be dumped to the log and also sent as an O packet if possible */
- USER_SAMELINE(line);
+ USER_SAMELINE(line);
return ERROR_OK;
}
{
FILE *script;
struct command_context_s *cmd_ctx = priv;
-
+
if (target->gdb_program_script)
{
script = open_file_from_path(cmd_ctx, target->gdb_program_script, "r");
INFO("executing gdb_program script '%s'", target->gdb_program_script);
command_run_file(cmd_ctx, script, COMMAND_EXEC);
fclose(script);
-
+
jtag_execute_queue();
}
-
+
return ERROR_OK;
}
{
case TARGET_EVENT_HALTED:
/* In the GDB protocol when we are stepping or coninuing execution,
- * we have a lingering reply. Upon receiving a halted event
+ * we have a lingering reply. Upon receiving a halted event
* when we have that lingering packet, we reply to the original
* step or continue packet.
- *
+ *
* Executing monitor commands can bring the target in and
* out of the running state so we'll see lots of TARGET_EVENT_XXX
* that are to be ignored.
{
/* stop forwarding log packets! */
log_remove_callback(gdb_log_callback, connection);
-
+
if (gdb_connection->ctrl_c)
{
signal = 0x2;
return ERROR_OK;
}
-\r
-\r
+
+
int gdb_new_connection(connection_t *connection)
{
gdb_connection_t *gdb_connection = malloc(sizeof(gdb_connection_t));
gdb_connection->vflash_image = NULL;
gdb_connection->closed = 0;
gdb_connection->busy = 0;
-
+
/* output goes through gdb connection */
command_set_output_handler(connection->cmd_ctx, gdb_output, connection);
/* register callback to be informed about target events */
- target_register_event_callback(gdb_target_callback_event_handler, connection);
+ target_register_event_callback(gdb_target_callback_event_handler, connection);
/* a gdb session just attached, put the target in halt mode */
if (((retval = gdb_service->target->type->halt(gdb_service->target)) != ERROR_OK) &&
/* if this connection registered a debug-message receiver delete it */
delete_debug_msg_receiver(connection->cmd_ctx, gdb_service->target);
-
+
if (connection->priv)
{
free(connection->priv);
u8 *buf;
int buf_len;
buf = reg->value;
- buf_len = CEIL(reg->size, 8);
+ buf_len = CEIL(reg->size, 8);
if (target->endianness == TARGET_LITTLE_ENDIAN)
{
tstr[(buf_len-1-i)*2] = DIGITS[(buf[i]>>4)&0xf];
tstr[(buf_len-1-i)*2+1] = DIGITS[buf[i]&0xf];
}
- }
+ }
}
void gdb_target_to_str(target_t *target, char *tstr, char *str)
{
str[i] = tstr[i];
}
- }
+ }
}
int gdb_get_registers_packet(connection_t *connection, target_t *target, char* packet, int packet_size)
bin_buf = malloc(CEIL(reg_list[i]->size, 8));
str_to_buf(hex_buf, CEIL(reg_list[i]->size, 8) * 2, bin_buf, reg_list[i]->size, 16);
- /* get register arch_type, and call set method */
+ /* get register arch_type, and call set method */
arch_type = register_get_arch_type(reg_list[i]->arch_type);
if (arch_type == NULL)
{
}
arch_type->set(reg_list[i], bin_buf);
- /* advance packet pointer */
+ /* advance packet pointer */
packet_p += (CEIL(reg_list[i]->size, 8) * 2);
free(bin_buf);
free(hex_buf);
}
- /* free reg_t *reg_list[] array allocated by get_gdb_reg_list */
+ /* free reg_t *reg_list[] array allocated by get_gdb_reg_list */
free(reg_list);
gdb_put_packet(connection, "OK", 2);
bin_buf = malloc(CEIL(reg_list[reg_num]->size, 8));
str_to_buf(hex_buf, CEIL(reg_list[reg_num]->size, 8) * 2, bin_buf, reg_list[reg_num]->size, 16);
- /* get register arch_type, and call set method */
+ /* get register arch_type, and call set method */
arch_type = register_get_arch_type(reg_list[reg_num]->arch_type);
if (arch_type == NULL)
{
/* We don't have to worry about the default 2 second timeout for GDB packets,
* because GDB breaks up large memory reads into smaller reads.
- *
+ *
* 8191 bytes by the looks of it. Why 8191 bytes instead of 8192?????
*/
int gdb_read_memory_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
{
/* TODO : Here we have to lie and send back all zero's lest stack traces won't work.
* At some point this might be fixed in GDB, in which case this code can be removed.
- *
+ *
* OpenOCD developers are acutely aware of this problem, but there is nothing
* gained by involving the user in this problem that hopefully will get resolved
* eventually
- *
+ *
* http://sourceware.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=gdb&pr=2395
*
* For now, the default is to fix up things to make current GDB versions work.
else
{
if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
- return retval;
+ return retval;
}
free(buffer);
else
{
if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
- return retval;
+ return retval;
}
return ERROR_OK;
return;
}
int first = 1;
-
+
for (;;)
{
if ((*xml == NULL) || (!first))
{
/* start by 0 to exercise all the code paths.
* Need minimum 2 bytes to fit 1 char and 0 terminator. */
-
+
*size = *size * 2 + 2;
char *t = *xml;
*xml = realloc(*xml, *size);
return;
}
}
-
+
va_list ap;
int ret;
va_start(ap, fmt);
static int decode_xfer_read(char *buf, char **annex, int *ofs, unsigned int *len)
{
char *separator;
-
+
/* Extract and NUL-terminate the annex. */
*annex = buf;
while (*buf && *buf != ':')
if (*buf == '\0')
return -1;
*buf++ = 0;
-
+
/* After the read marker and annex, qXfer looks like a
* traditional 'm' packet. */
-
+
*ofs = strtoul(buf, &separator, 16);
if (*separator != ',')
return -1;
*len = strtoul(separator+1, NULL, 16);
-
+
return 0;
}
{
int i;
int block_size = 0xffffffff;
-
+
/* loop through all sectors and return smallest sector size */
-
+
for (i = 0; i < bank->num_sectors; i++)
{
if (bank->sectors[i].size < block_size)
block_size = bank->sectors[i].size;
}
-
+
return block_size;
}
int gdb_query_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
{
command_context_t *cmd_ctx = connection->cmd_ctx;
-
+
if (strstr(packet, "qRcmd,"))
{
if (packet_size > 6)
cmd[i] = tmp;
}
cmd[(packet_size - 6)/2] = 0x0;
-
+
/* We want to print all debug output to GDB connection */
log_add_callback(gdb_log_callback, connection);
target_call_timer_callbacks();
u32 checksum;
u32 addr = 0;
u32 len = 0;
-
+
/* skip command character */
packet += 5;
-
+
addr = strtoul(packet, &separator, 16);
-
+
if (*separator != ',')
{
ERROR("incomplete read memory packet received, dropping connection");
return ERROR_SERVER_REMOTE_CLOSED;
}
-
+
len = strtoul(separator + 1, NULL, 16);
-
+
retval = target_checksum_memory(target, addr, len, &checksum);
-
+
if (retval == ERROR_OK)
{
snprintf(gdb_reply, 10, "C%8.8x", checksum);
else
{
if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
- return retval;
+ return retval;
}
-
+
return ERROR_OK;
}
}
int pos = 0;
int size = 0;
- xml_printf(&retval, &buffer, &pos, &size,
+ xml_printf(&retval, &buffer, &pos, &size,
"PacketSize=%x;qXfer:memory-map:read%c;qXfer:features:read-",
(GDB_BUFFER_SIZE - 1), gdb_use_memory_map == 1 ? '+' : '-');
-
+
if (retval != ERROR_OK)
{
gdb_send_error(connection, 01);
return ERROR_OK;
}
-
+
gdb_put_packet(connection, buffer, strlen(buffer));
free(buffer);
-
+
return ERROR_OK;
}
else if (strstr(packet, "qXfer:memory-map:read::"))
{
/* We get away with only specifying flash here. Regions that are not
- * specified are treated as if we provided no memory map(if not we
+ * specified are treated as if we provided no memory map(if not we
* could detect the holes and mark them as RAM).
* Normally we only execute this code once, but no big deal if we
* have to regenerate it a couple of times. */
-
+
flash_bank_t *p;
char *xml = NULL;
int size = 0;
int pos = 0;
int retval = ERROR_OK;
-
+
int offset;
int length;
char *separator;
int blocksize;
-
+
/* skip command character */
packet += 23;
-
+
offset = strtoul(packet, &separator, 16);
length = strtoul(separator + 1, &separator, 16);
-
+
xml_printf(&retval, &xml, &pos, &size, "<memory-map>\n");
-
+
int i = 0;
for (;;)
{
p = get_flash_bank_by_num(i);
if (p == NULL)
break;
-
+
/* if device has uneven sector sizes, eg. str7, lpc
* we pass the smallest sector size to gdb memory map */
blocksize = gdb_calc_blocksize(p);
-
+
xml_printf(&retval, &xml, &pos, &size, "<memory type=\"flash\" start=\"0x%x\" length=\"0x%x\">\n" \
"<property name=\"blocksize\">0x%x</property>\n" \
"</memory>\n", \
p->base, p->size, blocksize);
i++;
}
-
+
xml_printf(&retval, &xml, &pos, &size, "</memory-map>\n");
if (retval != ERROR_OK)
gdb_send_error(connection, retval);
return retval;
}
-
+
if (offset + length > pos)
{
length = pos - offset;
t[0] = 'l';
memcpy(t + 1, xml + offset, length);
gdb_put_packet(connection, t, length + 1);
-
+
free(t);
free(xml);
return ERROR_OK;
}
else if (strstr(packet, "qXfer:features:read:"))
- {
+ {
char *xml = NULL;
int size = 0;
int pos = 0;
int retval = ERROR_OK;
-
+
int offset;
unsigned int length;
char *annex;
-
+
/* skip command character */
packet += 20;
-
+
if (decode_xfer_read(packet, &annex, &offset, &length) < 0)
{
gdb_send_error(connection, 01);
return ERROR_OK;
}
-
+
if (strcmp(annex, "target.xml") != 0)
{
gdb_send_error(connection, 01);
return ERROR_OK;
}
-
+
xml_printf(&retval, &xml, &pos, &size, \
"l<target version=\"1.0\">\n<architecture>arm</architecture>\n</target>\n");
-
+
if (retval != ERROR_OK)
{
gdb_send_error(connection, retval);
return retval;
}
-
+
gdb_put_packet(connection, xml, strlen(xml) + 1);
-
+
free(xml);
return ERROR_OK;
}
-
+
gdb_put_packet(connection, "", 0);
return ERROR_OK;
}
int result;
/* if flash programming disabled - send a empty reply */
-
+
if (gdb_flash_program == 0)
{
gdb_put_packet(connection, "", 0);
return ERROR_OK;
}
-
+
if (strstr(packet, "vFlashErase:"))
{
unsigned long addr;
unsigned long length;
-
+
char *parse = packet + 12;
if (*parse == '\0')
{
ERROR("incomplete vFlashErase packet received, dropping connection");
return ERROR_SERVER_REMOTE_CLOSED;
}
-
+
/* assume all sectors need erasing - stops any problems
* when flash_write is called multiple times */
flash_set_dirty();
-
+
/* perform any target specific operations before the erase */
target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_PROGRAM);
-
+
/* perform erase */
if ((result = flash_erase_address_range(gdb_service->target, addr, length)) != ERROR_OK)
{
}
else
gdb_put_packet(connection, "OK", 2);
-
+
return ERROR_OK;
}
return ERROR_SERVER_REMOTE_CLOSED;
}
length = packet_size - (parse - packet);
-
+
/* create a new image if there isn't already one */
if (gdb_connection->vflash_image == NULL)
{
DEBUG("wrote %u bytes from vFlash image to flash", written);
gdb_put_packet(connection, "OK", 2);
}
-
+
image_close(gdb_connection->vflash_image);
free(gdb_connection->vflash_image);
gdb_connection->vflash_image = NULL;
-
+
return ERROR_OK;
}
case GDB_DETACH_RESUME:
target->type->resume(target, 1, 0, 1, 0);
break;
-
+
case GDB_DETACH_RESET:
target_process_reset(connection->cmd_ctx);
break;
-
+
case GDB_DETACH_HALT:
target->type->halt(target);
break;
-
+
case GDB_DETACH_NOTHING:
break;
}
-
+
gdb_put_packet(connection, "OK", 2);
-
+
return ERROR_OK;
}
-static void gdb_log_callback(void *priv, const char *file, int line,
+static void gdb_log_callback(void *priv, const char *file, int line,
const char *function, const char *format, va_list args)
{
connection_t *connection = priv;
gdb_connection_t *gdb_con = connection->priv;
-
+
if (gdb_con->busy)
{
/* do not reply this using the O packet */
char *t = alloc_printf(format, args);
if (t == NULL)
return;
-
- gdb_output_con(connection, t);
-
+
+ gdb_output_con(connection, t);
+
free(t);
}
switch (packet[0])
{
case 'H':
- /* Hct... -- set thread
+ /* Hct... -- set thread
* we don't have threads, send empty reply */
gdb_put_packet(connection, NULL, 0);
break;
case 'c':
case 's':
{
- /* We're running/stepping, in which case we can
+ /* We're running/stepping, in which case we can
* forward log output until the target is halted */
gdb_connection_t *gdb_con = connection->priv;
gdb_con->frontend_state = TARGET_RUNNING;
return ERROR_OK;
}
}
-
+
WARNING("invalid gdb_detach configuration directive: %s", args[0]);
return ERROR_OK;
}
return ERROR_OK;
}
}
-
+
WARNING("invalid gdb_memory_map configuration directive: %s", args[0]);
return ERROR_OK;
}
return ERROR_OK;
}
}
-
+
WARNING("invalid gdb_memory_map configuration directive: %s", args[0]);
return ERROR_OK;
}
return ERROR_OK;
}
}
-
+
WARNING("invalid gdb_report_data_abort configuration directive: %s", args[0]);
return ERROR_OK;
}
-\r
-if OOCD_TRACE\r
-OOCD_TRACE_FILES = oocd_trace.c\r
-else\r
-OOCD_TRACE_FILES =\r
-endif\r
-\r
-INCLUDES = -I$(top_srcdir)/src/gdb -I$(top_srcdir)/src/helper -I$(top_srcdir)/src/jtag -I$(top_srcdir)/src/xsvf $(all_includes)\r
-METASOURCES = AUTO\r
-AM_CPPFLAGS = -DPKGLIBDIR=\"$(pkglibdir)\" @CPPFLAGS@\r
-noinst_LIBRARIES = libtarget.a\r
-libtarget_a_SOURCES = target.c register.c breakpoints.c armv4_5.c embeddedice.c etm.c arm7tdmi.c arm9tdmi.c \\r
- arm_jtag.c arm7_9_common.c algorithm.c arm920t.c arm720t.c armv4_5_mmu.c armv4_5_cache.c arm_disassembler.c \\r
- arm966e.c arm926ejs.c feroceon.c etb.c xscale.c arm_simulator.c image.c armv7m.c cortex_m3.c cortex_swjdp.c \\r
- etm_dummy.c $(OOCD_TRACE_FILES) target_request.c trace.c\r
-noinst_HEADERS = target.h trace.h register.h armv4_5.h embeddedice.h etm.h arm7tdmi.h arm9tdmi.h \\r
- arm_jtag.h arm7_9_common.h arm920t.h arm720t.h armv4_5_mmu.h armv4_5_cache.h breakpoints.h algorithm.h \\r
- arm_disassembler.h arm966e.h arm926ejs.h etb.h xscale.h arm_simulator.h image.h armv7m.h cortex_m3.h cortex_swjdp.h \\r
- etm_dummy.h oocd_trace.h target_request.h trace.h\r
-\r
-nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.cfg target/at91eb40a.cfg\r
-\r
-\r
+
+if OOCD_TRACE
+OOCD_TRACE_FILES = oocd_trace.c
+else
+OOCD_TRACE_FILES =
+endif
+
+INCLUDES = -I$(top_srcdir)/src/gdb -I$(top_srcdir)/src/helper -I$(top_srcdir)/src/jtag -I$(top_srcdir)/src/xsvf $(all_includes)
+METASOURCES = AUTO
+AM_CPPFLAGS = -DPKGLIBDIR=\"$(pkglibdir)\" @CPPFLAGS@
+noinst_LIBRARIES = libtarget.a
+libtarget_a_SOURCES = target.c register.c breakpoints.c armv4_5.c embeddedice.c etm.c arm7tdmi.c arm9tdmi.c \
+ arm_jtag.c arm7_9_common.c algorithm.c arm920t.c arm720t.c armv4_5_mmu.c armv4_5_cache.c arm_disassembler.c \
+ arm966e.c arm926ejs.c feroceon.c etb.c xscale.c arm_simulator.c image.c armv7m.c cortex_m3.c cortex_swjdp.c \
+ etm_dummy.c $(OOCD_TRACE_FILES) target_request.c trace.c
+noinst_HEADERS = target.h trace.h register.h armv4_5.h embeddedice.h etm.h arm7tdmi.h arm9tdmi.h \
+ arm_jtag.h arm7_9_common.h arm920t.h arm720t.h armv4_5_mmu.h armv4_5_cache.h breakpoints.h algorithm.h \
+ arm_disassembler.h arm966e.h arm926ejs.h etb.h xscale.h arm_simulator.h image.h armv7m.h cortex_m3.h cortex_swjdp.h \
+ etm_dummy.h oocd_trace.h target_request.h trace.h
+
+nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.cfg target/at91eb40a.cfg
+
+
-# Reset script for AT91EB40a\r
-reg cpsr 0x000000D3 \r
-mww 0xFFE00020 0x1 \r
-mww 0xFFE00024 0x00000000 \r
-mww 0xFFE00000 0x01002539 \r
-mww 0xFFFFF124 0xFFFFFFFF \r
-mww 0xffff0010 0x100\r
-mww 0xffff0034 0x100\r
+# Reset script for AT91EB40a
+reg cpsr 0x000000D3
+mww 0xFFE00020 0x1
+mww 0xFFE00024 0x00000000
+mww 0xFFE00000 0x01002539
+mww 0xFFFFF124 0xFFFFFFFF
+mww 0xffff0010 0x100
+mww 0xffff0034 0x100
-#Script for AT91EB40a\r
-\r
-#Atmel ties SRST & TRST together, at which point it makes\r
-#no sense to use TRST, but use TMS instead.\r
-#\r
-#The annoying thing with tying SRST & TRST together is that\r
-#there is no way to halt the CPU *before and during* the\r
-#SRST reset, which means that the CPU will run a number\r
-#of cycles before it can be halted(as much as milliseconds).\r
-reset_config srst_only srst_pulls_trst\r
- \r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#target configuration\r
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
-target arm7tdmi little reset_init 0 arm7tdmi-s_r4\r
-\r
-# speed up memory downloads\r
-arm7 fast_memory_access enable\r
-arm7_9 dcc_downloads enable\r
-\r
-# OpenOCD does not have a flash driver for for AT91FR40162S \r
-target_script 0 reset event/at91eb40a_reset.cfg\r
-\r
-# required for usable performance. Used for lots of\r
-# other things than flash programming.\r
-working_area 0 0x00000000 0x20000 nobackup\r
-\r
-#force hardware values - we're running out of flash more\r
-#often than not. The user can disable this in his\r
-#subsequent config script.\r
-arm7_9 force_hw_bkpts enable\r
+#Script for AT91EB40a
+
+#Atmel ties SRST & TRST together, at which point it makes
+#no sense to use TRST, but use TMS instead.
+#
+#The annoying thing with tying SRST & TRST together is that
+#there is no way to halt the CPU *before and during* the
+#SRST reset, which means that the CPU will run a number
+#of cycles before it can be halted(as much as milliseconds).
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
+target arm7tdmi little reset_init 0 arm7tdmi-s_r4
+
+# speed up memory downloads
+arm7 fast_memory_access enable
+arm7_9 dcc_downloads enable
+
+# OpenOCD does not have a flash driver for for AT91FR40162S
+target_script 0 reset event/at91eb40a_reset.cfg
+
+# required for usable performance. Used for lots of
+# other things than flash programming.
+working_area 0 0x00000000 0x20000 nobackup
+
+#force hardware values - we're running out of flash more
+#often than not. The user can disable this in his
+#subsequent config script.
+arm7_9 force_hw_bkpts enable
-<html>\r
-<body>\r
-<h1>Testing</h1>\r
-A test should be done on code committed to svn. Commit, then test. That way \r
-one can know for sure *what* code was actually tested.\r
-<h1>Release procedure</h1>\r
-OpenOCD trunk is work in progress. Expect it to change daily and to have\r
-some work in progress.\r
-<p>\r
-If you need the latest released and tested version, look for binary snapshots of \r
-OpenOCD. Worst case look up the test result table below for the features \r
-that are important to you and extract and build the version that has the right\r
-cocktail of working features for you. You can also work with the community\r
-to address the problems you are seing. Testing work and bug reports are\r
-highly appreciated. \r
-<p>\r
-The OpenOCD community may decide to create release branches. If\r
-this happens, then a branch will be created from OpenOCD trunk. The particular\r
-version to create that branch might be an older version rather than the latest\r
-and greatest. Fixes are then ported to that release branch from OpenOCD trunk.\r
-<h2>Vocabulary</h2> \r
-<table border=1>\r
-<tr><td>Passed version</td><td>The latest version on which the test is known to pass</td></tr>\r
-<tr><td>Broken version</td><td>The latest version on which the test is known to fail. n/a when older than passed version.</td></tr>\r
-<tr><td>ID</td><td>A unqiue ID to refer to a test. The unique numbers are maintained in this file.</td></tr> \r
-</table>\r
-\r
-<h1>OpenOCD test results</h1>\r
-These tests can be performed on any JTAG device as long\r
-as they are executed using the unmodified code from SVN.\r
-<p>\r
-The latest version in which the test is known to have\r
-passed is in the table below. \r
-<table border=1>\r
- <tr><th>ID</th><th>Synopsis</th><th>Passed version</th><th>Broken version</th></tr>\r
- <tr><td>ocd1</td><td>Telnet Windows</td><td>291</td><td>n/a</td></tr>\r
- <tr><td>ocd2</td><td>Telnet Linux</td><td>291</td><td>n/a</td></tr>\r
- <tr><td>ocd3</td><td>Telnet Cygwin</td><td>291</td><td>n/a</td></tr>\r
- <tr><td><a href="#test_ocd4">ocd4</a></td><td>ARM7 debugging</td><td>291</td></tr>\r
- <tr><td>xscale1</a></td><td>XScale debugging</td><td>291</td></tr>\r
- <tr><td>xscale2</a></td><td>XScale MMU</td><td>291</td></tr>\r
-</table>\r
-<h1>OpenOCD JTAG device test results</h1>\r
-Each JTAG device must be tested \r
-<table border=1>\r
- <tr><th>ID</th><th>Synopsis</th><th>Passed version</th><th>Broken version</th></tr>\r
- <tr><td>jtag1</td><td>Wiggler</td><td>291</td><td>n/a</td></tr>\r
- <tr><td>jtag2</td><td>Parport</td><td>291</td><td>n/a</td></tr>\r
- <tr><td>jtag3</td><td>...</td><td>291</td><td>n/a</td></tr>\r
-</table>\r
-\r
-<h1>Policy on removing features from OpenOCD</h1>\r
-If a feature in OpenOCD is known to be broken and nobody has\r
-submitted a fix and the feature is causing trouble for\r
-maintainence, it can be removed from OpenOCD trunk. The threshold\r
-for temporarily removing something from OpenOCD trunk is low to\r
-ease maintainence and place the burden of maintainence on\r
-those that care about a feature. \r
-<p>\r
-Note that code is never deleted from OpenOCD svn, it remains\r
-in svn so if somebody sees a feature removed that they would\r
-like kept, they have but to port and fix that feature\r
-back up to main trunk. This document can be helpful in this\r
-regard in that the latest working version and the known broken\r
-version may be listed. \r
-<h1>Policy on adding features from OpenOCD</h1>\r
-To add a feature to OpenOCD, generally it should not break any existing\r
-features and it should be functional and the code reasonably readable\r
-and useful to others in the OpenOCD community. The code does not\r
-have to be completed. Work in progress is fine for OpenOCD trunk.\r
-<p>\r
-Also new tests should be defined. Note that the code does not have\r
-to pass all the tests. In fact it can be helpful to have tests\r
-to describe facets that really should be working, but aren't\r
-done yet.\r
-<a name="test_ocd4">\r
-<h1>ocd4 - ARM7 debugging</h1>\r
-Connect to ARM7 device(any), use GDB load to load a program into RAM and single halt, resume and single step.\r
-</body>\r
-</html>\r
\ No newline at end of file
+<html>
+<body>
+<h1>Testing</h1>
+A test should be done on code committed to svn. Commit, then test. That way
+one can know for sure *what* code was actually tested.
+<h1>Release procedure</h1>
+OpenOCD trunk is work in progress. Expect it to change daily and to have
+some work in progress.
+<p>
+If you need the latest released and tested version, look for binary snapshots of
+OpenOCD. Worst case look up the test result table below for the features
+that are important to you and extract and build the version that has the right
+cocktail of working features for you. You can also work with the community
+to address the problems you are seing. Testing work and bug reports are
+highly appreciated.
+<p>
+The OpenOCD community may decide to create release branches. If
+this happens, then a branch will be created from OpenOCD trunk. The particular
+version to create that branch might be an older version rather than the latest
+and greatest. Fixes are then ported to that release branch from OpenOCD trunk.
+<h2>Vocabulary</h2>
+<table border=1>
+<tr><td>Passed version</td><td>The latest version on which the test is known to pass</td></tr>
+<tr><td>Broken version</td><td>The latest version on which the test is known to fail. n/a when older than passed version.</td></tr>
+<tr><td>ID</td><td>A unqiue ID to refer to a test. The unique numbers are maintained in this file.</td></tr>
+</table>
+
+<h1>OpenOCD test results</h1>
+These tests can be performed on any JTAG device as long
+as they are executed using the unmodified code from SVN.
+<p>
+The latest version in which the test is known to have
+passed is in the table below.
+<table border=1>
+ <tr><th>ID</th><th>Synopsis</th><th>Passed version</th><th>Broken version</th></tr>
+ <tr><td>ocd1</td><td>Telnet Windows</td><td>291</td><td>n/a</td></tr>
+ <tr><td>ocd2</td><td>Telnet Linux</td><td>291</td><td>n/a</td></tr>
+ <tr><td>ocd3</td><td>Telnet Cygwin</td><td>291</td><td>n/a</td></tr>
+ <tr><td><a href="#test_ocd4">ocd4</a></td><td>ARM7 debugging</td><td>291</td></tr>
+ <tr><td>xscale1</a></td><td>XScale debugging</td><td>291</td></tr>
+ <tr><td>xscale2</a></td><td>XScale MMU</td><td>291</td></tr>
+</table>
+<h1>OpenOCD JTAG device test results</h1>
+Each JTAG device must be tested
+<table border=1>
+ <tr><th>ID</th><th>Synopsis</th><th>Passed version</th><th>Broken version</th></tr>
+ <tr><td>jtag1</td><td>Wiggler</td><td>291</td><td>n/a</td></tr>
+ <tr><td>jtag2</td><td>Parport</td><td>291</td><td>n/a</td></tr>
+ <tr><td>jtag3</td><td>...</td><td>291</td><td>n/a</td></tr>
+</table>
+
+<h1>Policy on removing features from OpenOCD</h1>
+If a feature in OpenOCD is known to be broken and nobody has
+submitted a fix and the feature is causing trouble for
+maintainence, it can be removed from OpenOCD trunk. The threshold
+for temporarily removing something from OpenOCD trunk is low to
+ease maintainence and place the burden of maintainence on
+those that care about a feature.
+<p>
+Note that code is never deleted from OpenOCD svn, it remains
+in svn so if somebody sees a feature removed that they would
+like kept, they have but to port and fix that feature
+back up to main trunk. This document can be helpful in this
+regard in that the latest working version and the known broken
+version may be listed.
+<h1>Policy on adding features from OpenOCD</h1>
+To add a feature to OpenOCD, generally it should not break any existing
+features and it should be functional and the code reasonably readable
+and useful to others in the OpenOCD community. The code does not
+have to be completed. Work in progress is fine for OpenOCD trunk.
+<p>
+Also new tests should be defined. Note that the code does not have
+to pass all the tests. In fact it can be helpful to have tests
+to describe facets that really should be working, but aren't
+done yet.
+<a name="test_ocd4">
+<h1>ocd4 - ARM7 debugging</h1>
+Connect to ARM7 device(any), use GDB load to load a program into RAM and single halt, resume and single step.
+</body>
+</html>
projects / openocd / commitdiff