tcl/target: Add Renesas S7G2 config

Tested with Renesas DK-S7G2M v3.0 board.

Change-Id: Ia6acaf70271ed4eb7bc4e921552cbd2ff83f6acb
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3169
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/tcl/target/renesas_s7g2.cfg b/tcl/target/renesas_s7g2.cfg
new file mode 100644 (file)
index 0000000..a09377b
--- /dev/null
+++ b/tcl/target/renesas_s7g2.cfg
@@ -0,0 +1,50 @@
+#
+# Renesas Synergy S7 G2 w/ ARM Cortex-M4 @ 240 MHz
+#
+
+if { [info exists CHIPNAME] } {
+       set _CHIPNAME $CHIPNAME
+} else {
+       set _CHIPNAME s7g2
+}
+
+if { [info exists CPU_JTAG_TAPID] } {
+       set _CPU_JTAG_TAPID $CPU_JTAG_TAPID
+} else {
+       set _CPU_JTAG_TAPID 0x5ba00477
+}
+
+if { [info exists CPU_SWD_TAPID] } {
+       set _CPU_SWD_TAPID $CPU_SWD_TAPID
+} else {
+       set _CPU_SWD_TAPID 0x5ba02477
+}
+
+source [find target/swj-dp.tcl]
+
+if { [using_jtag] } {
+       set _CPU_TAPID $_CPU_JTAG_TAPID
+} else {
+       set _CPU_TAPID $_CPU_SWD_TAPID
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPU_TAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+
+if { [info exists WORKAREASIZE] } {
+       set _WORKAREASIZE $WORKAREASIZE
+} else {
+       # 640 KB On-Chip SRAM
+       set _WORKAREASIZE 0xa0000
+}
+
+$_TARGETNAME configure -work-area-phys 0x1ffe0000 \
+                       -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+if { ![using_hla] } {
+       cortex_m reset_config sysresetreq
+}
+
+adapter_khz 1000