Dirk Behme <dirk.behme@googlemail.com> document post TAP reset event

git-svn-id: svn://svn.berlios.de/openocd/trunk@2700 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 62bb1eb8f95a1d845d457aa85589d591c2985d83..389b2a9d1b39371ba580ce9e3224eaeb68f6efdc 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2289,14 +2289,14 @@ does include a kind of JTAG router functionality.
 
 @deffn Command {jtag cget} dotted.name @option{-event} name
 @deffnx Command {jtag configure} dotted.name @option{-event} name string
-At this writing this mechanism is used only for event handling,
-and the only two events relate to TAP enabling and disabling.
+At this writing this mechanism is used only for event handling.
+Three events are available. Two events relate to TAP enabling
+and disabling, one to post reset handling.
 
 The @code{configure} subcommand assigns an event handler,
 a TCL string which is evaluated when the event is triggered.
 The @code{cget} subcommand returns that handler.
-The two possible values for an event @var{name}
-are @option{tap-disable} and @option{tap-enable}.
+The three possible values for an event @var{name} are @option{tap-disable}, @option{tap-enable} and @option{post-reset}.
 
 So for example, when defining a TAP for a CPU connected to
 a JTAG router, you should define TAP event handlers using
@@ -2312,6 +2312,15 @@ jtag configure CHIP.cpu -event tap-disable @{
   ... jtag operations using CHIP.jrc
 @}
 @end example
+
+If you need some post reset action, you can do:
+
+@example
+jtag configure CHIP.cpu -event post-reset @{
+  echo "Reset done"
+  ... jtag operations to be done after reset
+@}
+@end example
 @end deffn
 
 @deffn Command {jtag tapdisable} dotted.name