Minor updates

git-svn-id: https://bacula.svn.sourceforge.net/svnroot/bacula/trunk@565 91ce42f0-d328-0410-95d8-f526ca767f89

diff --git a/bacula/ChangeLog b/bacula/ChangeLog
index a34e1ce554dbce0503aa03174cfeb40317fc25c6..96b7fe95c2b6f5d6157475a66fc607c2bb41b70b 100644 (file)
--- a/bacula/ChangeLog
+++ b/bacula/ChangeLog
@@ -1,3 +1,111 @@
+2003-06-04 Version 1.31 Beta 04Jun03
+- Fix block.c to check errno only in case of return status -1 as 
+  suggested by Justin Gibbs (FreeBSD).
+- Implemented qfill command in btape for quick testing write/read of a tape.
+- Discovered that FreeBSD pthreads re-use the same thread id, which causes
+  the SD to fail when a user leaves a device unmounted (old pid is reused
+  and lock_device() thinks the same thread is calling again leading to
+  inconsistent state). Set id to zero after blocking the device during
+  unmount.
+- A lot of clean up, moving subroutines around for TermCode.
+- Free ua->prompt when Job terminates.
+- Add AutoPrune and Recycle to values copied from Pool resource
+  into Pool record on create/updated.
+- Implemented bsr for Verify VolumeToCatalog. 
+- Improved the Verify Job report using SD and FD term codes.
+- Split tree handling routines from ua_restore.c to ua_tree.c
+- Split bsr routines from ua_restore.c to bsr.c and bsr.h 
+- Fixed clash between FD and SD returned job values. Report now contains
+  values from FD.  Maybe I should change? or give both.
+- Attempt to fix negative use_count for dev packet in SD by adding
+  a couple of open_dev().   This may be cause of Dan's crash.
+- Clear no_wait_id when device is unblocked. This may be cause of Dan's crash.
+- Eliminate old "new lock code".
+- Add configure of mtx-changer for mtx path.
+- Always rewind tape before releasing it (for FreeBSD).
+- StartBlock was one too large for second volume.
+- Fixed restore to display status from both SD and FD.
+- Unified return status message for backup and restore.
+- Corrected segmentation fault reported by Dan when doing "label barcodes"
+  on a File.
+- Corrected a segmentation fault when attempting to send a JobMedia record
+  to the Console -- reported by Dan.
+- Added MySQL documentation for using the threaded libraries.
+- Added new columns and tables to Catalog database.
+- Wrote alter scripts and tested them (thanks to Dan for the help) on
+  MySQL and SQLite.
+- Started using enums where ever possible when passing flags to 
+  subroutines. This helps make the source much more readable.
+- Corrected a bug where a vertical database listing was being used in
+  the query command.
+- Added new argument to parse_args() to prevent command arg overflow.
+- Renamed ua_db_query.c ua_query.c.
+- Split scan.c out of lib/util.c
+- Perhaps I have *finally* fixed the command line history in gnome-console.
+- Added support for smartalloc for any global new or delete command
+  by overloading the global operators.
+- Made the default time with no qualifier day rather than seconds.
+- Fixed a bug in the store_size() routine that improperly converted from
+  double to uint32_t.
+- Started using "bool" where possible.
+- Zap SD session key once it is used.
+- Added *lots* more checking for strcpy -- bstrncpy(), ... 
+- Added CreateTime field to FileSet record and print it to distinguish
+  FileSets. 
+- Print an information message when a new FileSet is created.
+- Include the FileSet date/time in the Job report.
+- Indicate if a Job is upgraded in the Job report and from what previous level.
+- Incremented the database version.
+- Ensure that any DB error message is printed if the start_time of a previous
+  save is not found.
+- Free orphaned buffer in ua_restore.c in case of database error.
+- Implement enum for response DISPLAY_ERROR and NO_DISPLAY
+- Implement enum for create_pool (POOL_OP_CREATE, POOL_OP_UPDATE).
+- Make sure FileSets printed in restore are in order.
+- Add a number of bstrncat, and other protected string operations.
+- Clean up old structs in dird_conf.h
+- Remove all Slot invalidation code.
+- Add Automatic choice message to all do_prompt() calls.
+- Eliminate JobId from restore if not used.
+- Clean up a few error messages.
+- Make fill/unfill commands work correctly in btape.
+- Enhance btape fill and unfill commands.
+- Implement real Pmsg() code so that negative levels work in Dmsg()
+- Implement block number check -- had to turn it off because it doesn't
+  work.  Need to verify that it is the correct block and that block
+  numbers are properly written.
+- Moved readline from depkgs1 to depkgs.
+- Reworked the configure code to handle readline correctly. This was broken
+  mostly due to the fact that the readline routines are nested down one
+  directory.  Also, I missed one header file that was needed (possibly added
+  in a later version).
+- Put correct include on the dependencies make for Console readline.
+- Remove JobMediaId from VOL_PARAMS (no longer needed).
+- Sort VOL_PARAMS by JobMediaId using SQL in cats.
+- Add jcr as argument to block.c read_block... routines so that error
+  messages are immediately displayed.
+- Make bsr_dev() edit an error message if it is turned off and return 0.
+- Add checking for the BlockNumber in the read routines -- lots of
+  false matches are found -- much check writing end.
+- Now sort bsr volumes by JobMediaId -- produces better results.
+- It turns out that under certain circumstances, when doing a restore, the
+  Volumes will not be written to the BSR in the correct order.  I don't
+  know exactly why, but many thanks to Dan Langille for reporting this.
+  The solution is to sort the Vol_Params within each bsr (done), and to
+  sort the bsr chain (not yet implemented). Note, the bsr chain should
+  always be in order unless the user explicitly specifies the JobIds in
+  a different order.          
+- Began implementing C++ structs rather than typedef structs as in C.
+- Added volatile to a lot of variables that are used in two threads at
+  the same time. This should prevent improper optimization.   
+- Fixed a missing space in the "run job=xxx where=" the where was
+  glued to the end of the previous stuff (bootstrap filename). 
+- I *finally* found the cause of the mysterious failure of shell expansion.
+  It was due to the read() getting interrupted!  That's what opening up
+  SIGCHLD will do!
+- Remove unused default tape drive names.
+- Create a new status.c file in stored and split the status code out of dircmd.c
+
 2003-05-22 Version 1.31 Beta 22May03
 - I discovered that C++ permits "prototyping" structures e.g. struct A; is
   a valid statement. This permitted me to eliminate all the void *jcr, in
@@ -12,6 +120,7 @@
 - Print unexpected (or incorrect) termination message returned from FD.
 - Use switch() instead of giant if statement in verify_vol.c
 - Protect overrun from do_shell_expansion() by passing max length.
+
 2003-05-20 Version 1.31 Beta 20May03
 - Add mandrake to platforms
 - Suppress error messages if no bytes written to tape.

diff --git a/bacula/ReleaseNotes b/bacula/ReleaseNotes
index 6e6a4cf09b6c0e6d9b491b220947c1aeeb32263f..ec16a51d78b3d0cac60ea96b71de1df8a72242cd 100644 (file)
--- a/bacula/ReleaseNotes
+++ b/bacula/ReleaseNotes
@@ -1,9 +1,10 @@
 
           Release Notes for Bacula 1.31
 
-  Bacula code: Total files = 243 Total lines = 70,151 (*.h *.c *.in)
+  Bacula code: Total files = 246 Total lines = 70,476 (*.h *.c *.in)
 
 Major Changes this Release:
+- The database format has changed. Please see below.
 - Support to save and restore all files on WinNT/2K/XP systems 
   including the permissions. Unfortunately files that are in use by another
   program cannot be saved.
@@ -12,6 +13,8 @@ Major Changes this Release:
   timeouts. The heartbeat interval can be set.
 - Volume names may now only contain letters, numbers, colon, period, dash,
   and underscore.
+- Added readline to depkgs (removed from depkgs1) and fixed configuration if
+  it is not installed in your system libraries.
 
 
 Other Changes this Release:
@@ -24,7 +27,8 @@ Other Changes this Release:
 - Improvements to gnome-console.
 - Prune certain orphaned jobs (no files saved, no Volume used).
 - Added non-fatal errors to Job reports.
-- Eliminate need for SubsysDirectory in each daemon.
+- Eliminate need for SubsysDirectory in each daemon -- please remove
+  these records from your .conf files.
 - Add a lot more "command line" options to console commands.
 - More info in traceback (database type, ...).
 - Better handling of errors with autochangers during restore.
@@ -32,12 +36,50 @@ Other Changes this Release:
   to cleanup twice).
 - SD error messages such as autochanger errors are now properly
   directed back to Console -- previously some were lost.
+- A Storage daemon crash on FreeBSD systems (due to an improper FreeBSD
+  pthreads implementation -- IMO) is fixed.
+- Better Job termination report particularly for Verify and Restore jobs.
+- Update Verify VolumeToCatalog to use new BSR records.
+- Fixed list last 20 jobs in restore command (previously reported any 
+  20 jobs).
+- Gnome command line history works better.
+- Better messages if a job is upgraded from Diff or Inc to Full.
 
 
 
 Items to note:  !!!!!
 - For MySQL users, you must have the thread safe client libraries 
   available.  If you build MySQL yourself, add the --enable-thread-safe-client
-  option on the ./configure.
+  option on the ./configure.  You will most likely need to do an ldconfig.
+  Please see the installation documentation for building MySQL.
 - Version 1.31 and 1.30 daemons/Director are not compatible. You must
   upgrade all or nothing.
+- The format of the catalog database has changed, so you must either
+  re-initialize your database (losing all the old info) with:
+
+     ./drop_bacula_tables
+     ./make_bacula_tables
+
+  or you can use the appropriate script (you must choose the name according
+  to which database you have) in the <bacula-source>/src/cats directory.
+
+  BEFORE APPLYING THE ALTER SCRIPT PLEASE BACKUP YOUR DATABASE. Do one
+  of the following only if you wish to keep your old tables (not doing
+  the re-initialize documented above), and do this only after configuring
+  an building the new Bacula, but before trying to run it:
+
+  MySQL:
+     cd working-directory (or where you want to backup the catalog)
+     mysqladmin -f --opt bacula >bacula.sql
+     cd <bacula-source>/src/cats
+     ./alter_mysql_tables
+
+  SQLite:
+     cd working-directory
+     echo '.dump' sqlite bacula.db >bacula.sql
+     cd <bacula-source>/src/cats
+     ./alter_sqlite_tables
+      
+  When you are sure that Bacula is running with your upgraded database,
+  please delete the bacula.sql copy you made.
+  

diff --git a/bacula/kernstodo b/bacula/kernstodo
index 4f37ad34ed193b3f5f20ea2775d1f59aedb9ab8f..27cb30d5b820a0d029793f400a7db9f3d165514b 100644 (file)
--- a/bacula/kernstodo
+++ b/bacula/kernstodo
@@ -30,6 +30,13 @@ Testing to do: (painful)
 - Figure out how to use ssh or stunnel to protect Bacula communications.
 
 For 1.31 release:
+- Instrument use_count on DEVICE packets and ensure that the device is
+  being close()ed at the appropriate time.
+- Check if Incremental is working correctly when it looks for the previous Job 
+  (Phil's problem).
+- Add next Volume to be used to status output.
+- Add a recycle command.
+- Command to determine next volume needed for a particular job.
 - Make bootstrap filename unique.
 - Implement FileSet VolIndex.
 - Sort JobIds entered into recover tree.
@@ -916,4 +923,3 @@ Done: (see kernsdone for more)
 - The "List last 20 Jobs run" doesnt work correctly in restore.
   It doesnt show the last 20 jobs , but some older ones.
 - Fix Verify VolumeToCatalog to use BSRs -- it is broken.
-

diff --git a/bacula/src/stored/stored_conf.c b/bacula/src/stored/stored_conf.c
index 4704eca6816a943dc74f83d50cca9b49f7dabb67..2c3c0ed48200af0cd420549010fa2d62d97d8e69 100644 (file)
--- a/bacula/src/stored/stored_conf.c
+++ b/bacula/src/stored/stored_conf.c
@@ -96,7 +96,6 @@ static struct res_items dev_items[] = {
    {"randomaccess",          store_yesno,  ITEM(res_dev.cap_bits), CAP_RACCESS, 0, 0},
    {"automaticmount",        store_yesno,  ITEM(res_dev.cap_bits), CAP_AUTOMOUNT,  ITEM_DEFAULT, 0},
    {"labelmedia",            store_yesno,  ITEM(res_dev.cap_bits), CAP_LABEL,      ITEM_DEFAULT, 0},
-   {"mountanonymousvolumes", store_yesno,  ITEM(res_dev.cap_bits), CAP_ANONVOLS,   ITEM_DEFAULT, 0},
    {"alwaysopen",            store_yesno,  ITEM(res_dev.cap_bits), CAP_ALWAYSOPEN, ITEM_DEFAULT, 1},
    {"autochanger",           store_yesno,  ITEM(res_dev.cap_bits), CAP_AUTOCHANGER, ITEM_DEFAULT, 0},
    {"changerdevice",         store_strname,ITEM(res_dev.changer_name), 0, 0, 0},
@@ -114,6 +113,9 @@ static struct res_items dev_items[] = {
    {NULL, NULL, 0, 0, 0, 0} 
 };
 
+// {"mountanonymousvolumes", store_yesno,  ITEM(res_dev.cap_bits), CAP_ANONVOLS,   ITEM_DEFAULT, 0},
+
+
 /* Message resource */
 extern struct res_items msgs_items[];
 

diff --git a/bacula/src/version.h b/bacula/src/version.h
index ca803f84213904ee1f440fb4420411623d04f188..5b3cc3ebd31b5ab959ac4fb7a00ee5c9c4c93196 100644 (file)
--- a/bacula/src/version.h
+++ b/bacula/src/version.h
@@ -1,8 +1,8 @@
 /* */
 #define VERSION "1.31"
 #define VSTRING "1"
-#define BDATE   "03 Jun 2003"
-#define LSMDATE "03Jun03"
+#define BDATE   "04 Jun 2003"
+#define LSMDATE "04Jun03"
 
 /* Debug flags */
 #define DEBUG 1