uint32_t arm11_vcr = 0;
bool arm11_config_memrw_no_increment = false;
bool arm11_config_step_irq_enable = false;
+bool arm11_config_hardware_step = false;
#define ARM11_HANDLER(x) \
.x = arm11_##x
int arm11_step(struct target_s *target, int current, uint32_t address, int handle_breakpoints)
{
FNC_INFO;
- int retval;
LOG_DEBUG("target->state: %s",
target_state_name(target));
LOG_DEBUG("STEP PC %08" PRIx32 "%s", R(PC), !current ? "!" : "");
- /* TODO: to implement single stepping on arm11 devices that can't
- * do single stepping in hardware we need to calculate the next
- * pc and set up breakpoints accordingingly. */
- uint32_t next_pc;
- retval = arm11_simulate_step(target, &next_pc);
- if (retval != ERROR_OK)
- return retval;
-
-
/** \todo TODO: Thumb not supported here */
uint32_t next_instruction;
brp[0].write = 1;
brp[0].address = ARM11_SC7_BVR0;
- brp[0].value = R(PC);
brp[1].write = 1;
brp[1].address = ARM11_SC7_BCR0;
- brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (2 << 21);
+
+ if (arm11_config_hardware_step)
+ {
+ /* hardware single stepping be used if possible or is it better to
+ * always use the same code path? Hardware single stepping is not supported
+ * on all hardware
+ */
+ brp[0].value = R(PC);
+ brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (2 << 21);
+ } else
+ {
+ /* sets a breakpoint on the next PC(calculated by simulation),
+ */
+ uint32_t next_pc;
+ int retval;
+ retval = arm11_simulate_step(target, &next_pc);
+ if (retval != ERROR_OK)
+ return retval;
+
+ brp[0].value = next_pc;
+ brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (0 << 21);
+ }
CHECK_RETVAL(arm11_sc7_run(arm11, brp, asizeof(brp)));
CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_HALTED));
- if (R(PC) != next_pc)
- {
- LOG_WARNING("next pc != simulated address %08" PRIx32 "!=%08" PRIx32, R(PC), next_pc);
- }
-
return ERROR_OK;
}
BOOL_WRAPPER(memwrite_error_fatal, "fatal error mode for memory writes")
BOOL_WRAPPER(memrw_no_increment, "\"no increment\" mode for memory transfers")
BOOL_WRAPPER(step_irq_enable, "IRQs while stepping")
+BOOL_WRAPPER(hardware_step, "hardware single step")
int arm11_handle_vcr(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
RC_FINAL_BOOL("no_increment", "Don't increment address on multi-read/-write (default: disabled)",
memrw_no_increment)
- RC_FINAL_BOOL("step_irq_enable", "Enable interrupts while stepping (default: disabled)",
- step_irq_enable)
+RC_FINAL_BOOL("step_irq_enable", "Enable interrupts while stepping (default: disabled)",
+ step_irq_enable)
+RC_FINAL_BOOL("hardware_step", "hardware single stepping. By default use simulate + breakpoint. This command is only here to check if simulate + breakpoint implementation is broken.",
+ hardware_step)
RC_FINAL("vcr", "Control (Interrupt) Vector Catch Register",
arm11_handle_vcr)