cfg: Add config file variants using the ftdi driver instead of ft2232

part 2 - files that are currently untested but assumed to work, as other configs using the same layout work
fine

Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/754
Tested-by: jenkins

diff --git a/tcl/interface/ftdi/calao-usb-a9260-c01.cfg b/tcl/interface/ftdi/calao-usb-a9260-c01.cfg
new file mode 100644 (file)
index 0000000..d3da6b7
--- /dev/null
+++ b/tcl/interface/ftdi/calao-usb-a9260-c01.cfg
@@ -0,0 +1,22 @@
+#
+# CALAO Systems USB-A9260-C01
+#
+# http://www.calao-systems.com/
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "USB-A9260"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0c08 0x0f1b
+ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
+ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
+
+script interface/calao-usb-a9260.cfg
+script target/at91sam9260minimal.cfg

diff --git a/tcl/interface/ftdi/calao-usb-a9260-c02.cfg b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg
new file mode 100644 (file)
index 0000000..dc4dca8
--- /dev/null
+++ b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg
@@ -0,0 +1,22 @@
+#
+# CALAO Systems USB-A9260-C02
+#
+# http://www.calao-systems.com/
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "USB-A9260"
+ftdi_vid_pid 0x0403 0x6001
+
+ftdi_layout_init 0x0c08 0x0f1b
+ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
+ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
+
+script interface/calao-usb-a9260.cfg
+script target/at91sam9260minimal.cfg

diff --git a/tcl/interface/ftdi/dp_busblaster.cfg b/tcl/interface/ftdi/dp_busblaster.cfg
new file mode 100644 (file)
index 0000000..51a59e1
--- /dev/null
+++ b/tcl/interface/ftdi/dp_busblaster.cfg
@@ -0,0 +1,23 @@
+#
+# Dangerous Prototypes - Bus Blaster
+#
+# The Bus Blaster has a configurable buffer between the FTDI FT2232H and the
+# JTAG header which allows it to emulate various debugger types. It comes
+# configured as a JTAGkey device.
+#
+# http://dangerousprototypes.com/docs/Bus_Blaster
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Dual RS232-HS"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0c08 0x0f1b
+ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
+ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800

diff --git a/tcl/interface/ftdi/ngxtech.cfg b/tcl/interface/ftdi/ngxtech.cfg
new file mode 100644 (file)
index 0000000..9eaa3c5
--- /dev/null
+++ b/tcl/interface/ftdi/ngxtech.cfg
@@ -0,0 +1,19 @@
+#
+# NGX ARM USB JTAG
+#
+# http://shop.ngxtechnologies.com/product_info.php?cPath=26&products_id=30
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "NGX JTAG"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0508 0x0f1b
+ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
+ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400

diff --git a/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg b/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg
new file mode 100644 (file)
index 0000000..8a96cc6
--- /dev/null
+++ b/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg
@@ -0,0 +1,20 @@
+#
+# Olimex ARM-USB-TINY-H
+#
+# http://www.olimex.com/dev/arm-usb-tiny-h.html
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
+ftdi_vid_pid 0x15ba 0x002a
+
+ftdi_layout_init 0x0c08 0x0f1b
+ftdi_layout_signal nSRST -oe 0x0200
+ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
+ftdi_layout_signal LED -data 0x0800

diff --git a/tcl/interface/ftdi/olimex-jtag-tiny.cfg b/tcl/interface/ftdi/olimex-jtag-tiny.cfg
new file mode 100644 (file)
index 0000000..1807566
--- /dev/null
+++ b/tcl/interface/ftdi/olimex-jtag-tiny.cfg
@@ -0,0 +1,20 @@
+#
+# Olimex ARM-USB-TINY
+#
+# http://www.olimex.com/dev/arm-usb-tiny.html
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Olimex OpenOCD JTAG TINY"
+ftdi_vid_pid 0x15ba 0x0004
+
+ftdi_layout_init 0x0c08 0x0f1b
+ftdi_layout_signal nSRST -oe 0x0200
+ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
+ftdi_layout_signal LED -data 0x0800

diff --git a/tcl/interface/ftdi/oocdlink.cfg b/tcl/interface/ftdi/oocdlink.cfg
new file mode 100644 (file)
index 0000000..fc09a16
--- /dev/null
+++ b/tcl/interface/ftdi/oocdlink.cfg
@@ -0,0 +1,19 @@
+#
+# Joern Kaipf's OOCDLink
+#
+# http://www.joernonline.de/contrexx2/cms/index.php?page=126
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "OOCDLink"
+ftdi_vid_pid 0x0403 0xbaf8
+
+ftdi_layout_init 0x0508 0x0f1b
+ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
+ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400

diff --git a/tcl/interface/ftdi/vpaclink.cfg b/tcl/interface/ftdi/vpaclink.cfg
new file mode 100644 (file)
index 0000000..2057619
--- /dev/null
+++ b/tcl/interface/ftdi/vpaclink.cfg
@@ -0,0 +1,19 @@
+#
+# Voipac VPACLink
+#
+# http://voipac.com/27M-JTG-000
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "VPACLink"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0508 0x0f1b
+ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
+ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400