Emsg1(M_ABORT, 0, "Tape block size (%d) is not a power of 2\n", TAPE_BSIZE);
}
- printf("Tape block size is %d bytes.\n", TAPE_BSIZE);
+ printf("Tape block granularity is %d bytes.\n", TAPE_BSIZE);
while ((ch = getopt(argc, argv, "c:d:st?")) != -1) {
switch (ch) {
}
}
-/*
- * Test on uninitialized tape
- * Destroys tape contents !!!! Including Bacula label.
- */
-static void rawtestcmd()
-{
-#ifdef xxxx
- int i, j, k;
-
- if (!dev) {
- Pmsg0(0, "No device: Use device command.\n");
- return;
- }
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
- return;
- }
- Pmsg0(0, "Rewound, now writing 100 blocks\n");
- for (i=0; i<100; i++) {
- j = 10000 + i;
- memset(buf, i, j);
- if (!write_dev(dev, buf, j)) {
- Pmsg1(0, "Bad status from write. ERR=%s\n", strerror_dev(dev));
- return;
- }
- Pmsg2(10, "Wrote %d bytes of %d\n", j, i);
- }
- Pmsg0(0, "100 Blocks written, flushing buffers and writing EOF\n");
- if (flush_dev(dev) != 0) {
- Pmsg1(0, "Error writing flushing. ERR=%s\n", strerror(errno));
- return;
- }
- if (weof_dev(dev, 1) != 0) {
- Pmsg1(0, "Error writing eof. ERR=%s\n", strerror(errno));
- return;
- }
- Pmsg0(0, "Rewinding ...\n");
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
- return;
- }
-
-
- Pmsg0(0, "Read and verify data ...\n");
- for (i=0; i<100; i++) {
- j = 10000 + i;
- if (!read_dev(dev, buf, j)) {
- Pmsg1(0, "Bad status from read. ERR=%s\n", strerror_dev(dev));
- return;
- }
- for (k=0; k<j; k++) {
- if (buf[k] != i) {
- Pmsg5(0, "Data read expected %d got %d at byte %d, block %d size %d\n",
- i, buf[k], k, i, j);
- return;
- }
- }
- Dmsg3(10, "Successful read block %d of %d bytes of %d\n", i, j, i);
- }
- Pmsg0(0, "Read OK!\n");
- Pmsg0(0, "Rewinding ...\n");
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
- return;
- }
-#else
- printf("Rawtest command no longer implemented.\n");
-#endif
-}
/* Go to the end of the medium -- raw command
* The idea was orginally that the end of the Bacula
}
Pmsg0(0, "Test writting larger and larger records.\n\
-This is a torture test for records. \n");
+This is a torture test for records.\nI am going to write\n\
+larger and larger records. It will stop when the record size\n\
+plus the header exceeds the block size (by default about 64K\n");
+
+
+ get_cmd("Do you want to continue? (y/n): ");
+ if (cmd[0] != 'y') {
+ Pmsg0(000, "Command aborted.\n");
+ return;
+ }
sm_check(__FILE__, __LINE__, False);
block = new_block(dev);
rec = new_record();
for (i=1; i<500000; i++) {
- rec->data = (char *) check_pool_memory_size(rec->data, i);
+ rec->data = check_pool_memory_size(rec->data, i);
memset(rec->data, i & 0xFF, i);
rec->data_len = i;
sm_check(__FILE__, __LINE__, False);
- while (!write_record_to_block(block, rec)) {
+ if (write_record_to_block(block, rec)) {
empty_block(block);
blkno++;
Pmsg2(0, "Block %d i=%d\n", blkno, i);
+ } else {
+ break;
}
sm_check(__FILE__, __LINE__, False);
}
}
-/*
- * Test on labeled tape. Preserves Bacula label.
- */
-static void appendcmd()
-{
-
-#ifdef xxxx_this_code_turned_off
-
- int i, j, k;
- int file;
- DEV_BLOCK *block;
-
- if (!dev) {
- Pmsg0(0, "No device: Use device command.\n");
- return;
- }
-
- block = new_block(dev);
-
- if (!ready_device_for_append(jcr, dev, block, VolName)) {
- Pmsg0(0, "Cannot append, not a Bacula tape.\n");
- return;
- }
-
- file = dev_file(dev);
- Pmsg1(0, "Begin write test data in file %d\n", file);
-
- /* Write our test data */
- for (i=0; i<100; i++) {
- j = 10000 + i;
- memset(buf, i, j);
- if (!write_dev(dev, buf, j)) {
- Pmsg1(0, "Bad status from write. ERR=%s\n", strerror_dev(dev));
- return;
- }
- Pmsg2(10, "Wrote %d bytes of %d\n", j, i);
- }
-
- if (flush_dev(dev) != 0) { /* ensure written to tape */
- Pmsg1(0, "Flush error: %s\n", strerror(errno));
- }
- if (weof_dev(dev, 1) != 0) {
- Pmsg1(0, "EOF error: %s\n", strerror(errno));
- }
-
- Pmsg0(0, "Rewind and reread label\n");
- if (read_dev_volume_label(dev, VolName) != VOL_OK) {
- return;
- }
-
- if (file != 0) {
- Pmsg1(0, "FSF %d files\n", file);
- fsf_dev(dev, file);
- }
-
- file = dev_file(dev);
- Pmsg1(0, "Begin read/test from file %d\n", file);
- /* Now read our test data and make sure it is what we wrote */
- for (i=0; i<100; i++) {
- j = 10000 + i;
- if (!read_dev(dev, buf, j)) {
- Pmsg1(0, "Bad status from read. ERR=%s\n", strerror_dev(dev));
- return;
- }
- for (k=0; k<j; k++) {
- if (buf[k] != i) {
- Pmsg5(0, "Data read expected %d got %d at byte %d, block %d size %d\n",
- i, buf[k], k, i, j);
- return;
- }
- }
- Pmsg3(10, "Successful read block %d of %d bytes of %d\n", i, j, i);
- }
-
- Pmsg0(0, "Reread test data successfully.\n");
-#else
- printf("append command no longer implemented.\n");
-#endif
-}
-
-
struct cmdstruct { char *key; void (*func)(); char *help; };
static struct cmdstruct commands[] = {
- {"append", appendcmd, "append and read test data on a Bacula labeled tape"},
{"bsf", bsfcmd, "backspace file"},
{"bsr", bsrcmd, "backspace record"},
{"cap", capcmd, "list device capabilities"},
{"label", labelcmd, "write a Bacula label to the tape"},
{"load", loadcmd, "load a tape"},
{"quit", quitcmd, "quit btape"},
- {"rawtest", rawtestcmd, "write and read test data on unlabeled tape"},
{"rd", rdcmd, "read tape"},
{"readlabel", readlabelcmd, "read and print the Bacula tape label"},
{"rectest", rectestcmd, "test record handling functions"},
projects / bacula / bacula / commitdiff