--- /dev/null
+/* $OpenLDAP$ */
+/*
+ * FILE: sha2.c
+ * AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/
+ *
+ * Copyright (c) 2000-2001, Aaron D. Gifford
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: sha2.c,v 1.1 2001/11/08 00:01:51 adg Exp adg $
+ */
+
+#include <string.h> /* memcpy()/memset() or bcopy()/bzero() */
+#include <assert.h> /* assert() */
+#include "sha2.h"
+
+/*
+ * ASSERT NOTE:
+ * Some sanity checking code is included using assert(). On my FreeBSD
+ * system, this additional code can be removed by compiling with NDEBUG
+ * defined. Check your own systems manpage on assert() to see how to
+ * compile WITHOUT the sanity checking code on your system.
+ *
+ * UNROLLED TRANSFORM LOOP NOTE:
+ * You can define SHA2_UNROLL_TRANSFORM to use the unrolled transform
+ * loop version for the hash transform rounds (defined using macros
+ * later in this file). Either define on the command line, for example:
+ *
+ * cc -DSHA2_UNROLL_TRANSFORM -o sha2 sha2.c sha2prog.c
+ *
+ * or define below:
+ *
+ * #define SHA2_UNROLL_TRANSFORM
+ *
+ */
+
+
+/*** SHA-256/384/512 Machine Architecture Definitions *****************/
+/*
+ * BYTE_ORDER NOTE:
+ *
+ * Please make sure that your system defines BYTE_ORDER. If your
+ * architecture is little-endian, make sure it also defines
+ * LITTLE_ENDIAN and that the two (BYTE_ORDER and LITTLE_ENDIAN) are
+ * equivilent.
+ *
+ * If your system does not define the above, then you can do so by
+ * hand like this:
+ *
+ * #define LITTLE_ENDIAN 1234
+ * #define BIG_ENDIAN 4321
+ *
+ * And for little-endian machines, add:
+ *
+ * #define BYTE_ORDER LITTLE_ENDIAN
+ *
+ * Or for big-endian machines:
+ *
+ * #define BYTE_ORDER BIG_ENDIAN
+ *
+ * The FreeBSD machine this was written on defines BYTE_ORDER
+ * appropriately by including <sys/types.h> (which in turn includes
+ * <machine/endian.h> where the appropriate definitions are actually
+ * made).
+ */
+#if !defined(BYTE_ORDER) || (BYTE_ORDER != LITTLE_ENDIAN && BYTE_ORDER != BIG_ENDIAN)
+#error Define BYTE_ORDER to be equal to either LITTLE_ENDIAN or BIG_ENDIAN
+#endif
+
+/*
+ * Define the followingsha2_* types to types of the correct length on
+ * the native archtecture. Most BSD systems and Linux define u_intXX_t
+ * types. Machines with very recent ANSI C headers, can use the
+ * uintXX_t definintions from inttypes.h by defining SHA2_USE_INTTYPES_H
+ * during compile or in the sha.h header file.
+ *
+ * Machines that support neither u_intXX_t nor inttypes.h's uintXX_t
+ * will need to define these three typedefs below (and the appropriate
+ * ones in sha.h too) by hand according to their system architecture.
+ *
+ * Thank you, Jun-ichiro itojun Hagino, for suggesting using u_intXX_t
+ * types and pointing out recent ANSI C support for uintXX_t in inttypes.h.
+ */
+#ifdef SHA2_USE_INTTYPES_H
+
+typedef uint8_t sha2_byte; /* Exactly 1 byte */
+typedef uint32_t sha2_word32; /* Exactly 4 bytes */
+typedef uint64_t sha2_word64; /* Exactly 8 bytes */
+
+#else /* SHA2_USE_INTTYPES_H */
+
+typedef u_int8_t sha2_byte; /* Exactly 1 byte */
+typedef u_int32_t sha2_word32; /* Exactly 4 bytes */
+typedef u_int64_t sha2_word64; /* Exactly 8 bytes */
+
+#endif /* SHA2_USE_INTTYPES_H */
+
+
+/*** SHA-256/384/512 Various Length Definitions ***********************/
+/* NOTE: Most of these are in sha2.h */
+#define SHA256_SHORT_BLOCK_LENGTH (SHA256_BLOCK_LENGTH - 8)
+#define SHA384_SHORT_BLOCK_LENGTH (SHA384_BLOCK_LENGTH - 16)
+#define SHA512_SHORT_BLOCK_LENGTH (SHA512_BLOCK_LENGTH - 16)
+
+
+/*** ENDIAN REVERSAL MACROS *******************************************/
+#if BYTE_ORDER == LITTLE_ENDIAN
+#define REVERSE32(w,x) { \
+ sha2_word32 tmp = (w); \
+ tmp = (tmp >> 16) | (tmp << 16); \
+ (x) = ((tmp & 0xff00ff00UL) >> 8) | ((tmp & 0x00ff00ffUL) << 8); \
+}
+#define REVERSE64(w,x) { \
+ sha2_word64 tmp = (w); \
+ tmp = (tmp >> 32) | (tmp << 32); \
+ tmp = ((tmp & 0xff00ff00ff00ff00ULL) >> 8) | \
+ ((tmp & 0x00ff00ff00ff00ffULL) << 8); \
+ (x) = ((tmp & 0xffff0000ffff0000ULL) >> 16) | \
+ ((tmp & 0x0000ffff0000ffffULL) << 16); \
+}
+#endif /* BYTE_ORDER == LITTLE_ENDIAN */
+
+/*
+ * Macro for incrementally adding the unsigned 64-bit integer n to the
+ * unsigned 128-bit integer (represented using a two-element array of
+ * 64-bit words):
+ */
+#define ADDINC128(w,n) { \
+ (w)[0] += (sha2_word64)(n); \
+ if ((w)[0] < (n)) { \
+ (w)[1]++; \
+ } \
+}
+
+/*
+ * Macros for copying blocks of memory and for zeroing out ranges
+ * of memory. Using these macros makes it easy to switch from
+ * using memset()/memcpy() and using bzero()/bcopy().
+ *
+ * Please define either SHA2_USE_MEMSET_MEMCPY or define
+ * SHA2_USE_BZERO_BCOPY depending on which function set you
+ * choose to use:
+ */
+#if !defined(SHA2_USE_MEMSET_MEMCPY) && !defined(SHA2_USE_BZERO_BCOPY)
+/* Default to memset()/memcpy() if no option is specified */
+#define SHA2_USE_MEMSET_MEMCPY 1
+#endif
+#if defined(SHA2_USE_MEMSET_MEMCPY) && defined(SHA2_USE_BZERO_BCOPY)
+/* Abort with an error if BOTH options are defined */
+#error Define either SHA2_USE_MEMSET_MEMCPY or SHA2_USE_BZERO_BCOPY, not both!
+#endif
+
+#ifdef SHA2_USE_MEMSET_MEMCPY
+#define MEMSET_BZERO(p,l) memset((p), 0, (l))
+#define MEMCPY_BCOPY(d,s,l) memcpy((d), (s), (l))
+#endif
+#ifdef SHA2_USE_BZERO_BCOPY
+#define MEMSET_BZERO(p,l) bzero((p), (l))
+#define MEMCPY_BCOPY(d,s,l) bcopy((s), (d), (l))
+#endif
+
+
+/*** THE SIX LOGICAL FUNCTIONS ****************************************/
+/*
+ * Bit shifting and rotation (used by the six SHA-XYZ logical functions:
+ *
+ * NOTE: The naming of R and S appears backwards here (R is a SHIFT and
+ * S is a ROTATION) because the SHA-256/384/512 description document
+ * (see http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf) uses this
+ * same "backwards" definition.
+ */
+/* Shift-right (used in SHA-256, SHA-384, and SHA-512): */
+#define R(b,x) ((x) >> (b))
+/* 32-bit Rotate-right (used in SHA-256): */
+#define S32(b,x) (((x) >> (b)) | ((x) << (32 - (b))))
+/* 64-bit Rotate-right (used in SHA-384 and SHA-512): */
+#define S64(b,x) (((x) >> (b)) | ((x) << (64 - (b))))
+
+/* Two of six logical functions used in SHA-256, SHA-384, and SHA-512: */
+#define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z)))
+#define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
+
+/* Four of six logical functions used in SHA-256: */
+#define Sigma0_256(x) (S32(2, (x)) ^ S32(13, (x)) ^ S32(22, (x)))
+#define Sigma1_256(x) (S32(6, (x)) ^ S32(11, (x)) ^ S32(25, (x)))
+#define sigma0_256(x) (S32(7, (x)) ^ S32(18, (x)) ^ R(3 , (x)))
+#define sigma1_256(x) (S32(17, (x)) ^ S32(19, (x)) ^ R(10, (x)))
+
+/* Four of six logical functions used in SHA-384 and SHA-512: */
+#define Sigma0_512(x) (S64(28, (x)) ^ S64(34, (x)) ^ S64(39, (x)))
+#define Sigma1_512(x) (S64(14, (x)) ^ S64(18, (x)) ^ S64(41, (x)))
+#define sigma0_512(x) (S64( 1, (x)) ^ S64( 8, (x)) ^ R( 7, (x)))
+#define sigma1_512(x) (S64(19, (x)) ^ S64(61, (x)) ^ R( 6, (x)))
+
+/*** INTERNAL FUNCTION PROTOTYPES *************************************/
+/* NOTE: These should not be accessed directly from outside this
+ * library -- they are intended for private internal visibility/use
+ * only.
+ */
+void SHA512_Last(SHA512_CTX*);
+void SHA256_Transform(SHA256_CTX*, const sha2_word32*);
+void SHA512_Transform(SHA512_CTX*, const sha2_word64*);
+
+
+/*** SHA-XYZ INITIAL HASH VALUES AND CONSTANTS ************************/
+/* Hash constant words K for SHA-256: */
+const static sha2_word32 K256[64] = {
+ 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL,
+ 0x3956c25bUL, 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL,
+ 0xd807aa98UL, 0x12835b01UL, 0x243185beUL, 0x550c7dc3UL,
+ 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL, 0xc19bf174UL,
+ 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL,
+ 0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL,
+ 0x983e5152UL, 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL,
+ 0xc6e00bf3UL, 0xd5a79147UL, 0x06ca6351UL, 0x14292967UL,
+ 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL, 0x53380d13UL,
+ 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL,
+ 0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL,
+ 0xd192e819UL, 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL,
+ 0x19a4c116UL, 0x1e376c08UL, 0x2748774cUL, 0x34b0bcb5UL,
+ 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL, 0x682e6ff3UL,
+ 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL,
+ 0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL
+};
+
+/* Initial hash value H for SHA-256: */
+const static sha2_word32 sha256_initial_hash_value[8] = {
+ 0x6a09e667UL,
+ 0xbb67ae85UL,
+ 0x3c6ef372UL,
+ 0xa54ff53aUL,
+ 0x510e527fUL,
+ 0x9b05688cUL,
+ 0x1f83d9abUL,
+ 0x5be0cd19UL
+};
+
+/* Hash constant words K for SHA-384 and SHA-512: */
+const static sha2_word64 K512[80] = {
+ 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL,
+ 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL,
+ 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL,
+ 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL,
+ 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL,
+ 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL,
+ 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL,
+ 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL,
+ 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL,
+ 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL,
+ 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL,
+ 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL,
+ 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL,
+ 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL,
+ 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL,
+ 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL,
+ 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL,
+ 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL,
+ 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL,
+ 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL,
+ 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL,
+ 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL,
+ 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL,
+ 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL,
+ 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL,
+ 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL,
+ 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL,
+ 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL,
+ 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL,
+ 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL,
+ 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL,
+ 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL,
+ 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL,
+ 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL,
+ 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL,
+ 0x113f9804bef90daeULL, 0x1b710b35131c471bULL,
+ 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL,
+ 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL,
+ 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL,
+ 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL
+};
+
+/* Initial hash value H for SHA-384 */
+const static sha2_word64 sha384_initial_hash_value[8] = {
+ 0xcbbb9d5dc1059ed8ULL,
+ 0x629a292a367cd507ULL,
+ 0x9159015a3070dd17ULL,
+ 0x152fecd8f70e5939ULL,
+ 0x67332667ffc00b31ULL,
+ 0x8eb44a8768581511ULL,
+ 0xdb0c2e0d64f98fa7ULL,
+ 0x47b5481dbefa4fa4ULL
+};
+
+/* Initial hash value H for SHA-512 */
+const static sha2_word64 sha512_initial_hash_value[8] = {
+ 0x6a09e667f3bcc908ULL,
+ 0xbb67ae8584caa73bULL,
+ 0x3c6ef372fe94f82bULL,
+ 0xa54ff53a5f1d36f1ULL,
+ 0x510e527fade682d1ULL,
+ 0x9b05688c2b3e6c1fULL,
+ 0x1f83d9abfb41bd6bULL,
+ 0x5be0cd19137e2179ULL
+};
+
+/*
+ * Constant used by SHA256/384/512_End() functions for converting the
+ * digest to a readable hexadecimal character string:
+ */
+static const char *sha2_hex_digits = "0123456789abcdef";
+
+
+/*** SHA-256: *********************************************************/
+void SHA256_Init(SHA256_CTX* context) {
+ if (context == (SHA256_CTX*)0) {
+ return;
+ }
+ MEMCPY_BCOPY(context->state, sha256_initial_hash_value, SHA256_DIGEST_LENGTH);
+ MEMSET_BZERO(context->buffer, SHA256_BLOCK_LENGTH);
+ context->bitcount = 0;
+}
+
+#ifdef SHA2_UNROLL_TRANSFORM
+
+/* Unrolled SHA-256 round macros: */
+
+#if BYTE_ORDER == LITTLE_ENDIAN
+
+#define ROUND256_0_TO_15(a,b,c,d,e,f,g,h) \
+ REVERSE32(*data++, W256[j]); \
+ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + \
+ K256[j] + W256[j]; \
+ (d) += T1; \
+ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
+ j++
+
+
+#else /* BYTE_ORDER == LITTLE_ENDIAN */
+
+#define ROUND256_0_TO_15(a,b,c,d,e,f,g,h) \
+ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + \
+ K256[j] + (W256[j] = *data++); \
+ (d) += T1; \
+ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
+ j++
+
+#endif /* BYTE_ORDER == LITTLE_ENDIAN */
+
+#define ROUND256(a,b,c,d,e,f,g,h) \
+ s0 = W256[(j+1)&0x0f]; \
+ s0 = sigma0_256(s0); \
+ s1 = W256[(j+14)&0x0f]; \
+ s1 = sigma1_256(s1); \
+ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + K256[j] + \
+ (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0); \
+ (d) += T1; \
+ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
+ j++
+
+void SHA256_Transform(SHA256_CTX* context, const sha2_word32* data) {
+ sha2_word32 a, b, c, d, e, f, g, h, s0, s1;
+ sha2_word32 T1, *W256;
+ int j;
+
+ W256 = (sha2_word32*)context->buffer;
+
+ /* Initialize registers with the prev. intermediate value */
+ a = context->state[0];
+ b = context->state[1];
+ c = context->state[2];
+ d = context->state[3];
+ e = context->state[4];
+ f = context->state[5];
+ g = context->state[6];
+ h = context->state[7];
+
+ j = 0;
+ do {
+ /* Rounds 0 to 15 (unrolled): */
+ ROUND256_0_TO_15(a,b,c,d,e,f,g,h);
+ ROUND256_0_TO_15(h,a,b,c,d,e,f,g);
+ ROUND256_0_TO_15(g,h,a,b,c,d,e,f);
+ ROUND256_0_TO_15(f,g,h,a,b,c,d,e);
+ ROUND256_0_TO_15(e,f,g,h,a,b,c,d);
+ ROUND256_0_TO_15(d,e,f,g,h,a,b,c);
+ ROUND256_0_TO_15(c,d,e,f,g,h,a,b);
+ ROUND256_0_TO_15(b,c,d,e,f,g,h,a);
+ } while (j < 16);
+
+ /* Now for the remaining rounds to 64: */
+ do {
+ ROUND256(a,b,c,d,e,f,g,h);
+ ROUND256(h,a,b,c,d,e,f,g);
+ ROUND256(g,h,a,b,c,d,e,f);
+ ROUND256(f,g,h,a,b,c,d,e);
+ ROUND256(e,f,g,h,a,b,c,d);
+ ROUND256(d,e,f,g,h,a,b,c);
+ ROUND256(c,d,e,f,g,h,a,b);
+ ROUND256(b,c,d,e,f,g,h,a);
+ } while (j < 64);
+
+ /* Compute the current intermediate hash value */
+ context->state[0] += a;
+ context->state[1] += b;
+ context->state[2] += c;
+ context->state[3] += d;
+ context->state[4] += e;
+ context->state[5] += f;
+ context->state[6] += g;
+ context->state[7] += h;
+
+ /* Clean up */
+ a = b = c = d = e = f = g = h = T1 = 0;
+}
+
+#else /* SHA2_UNROLL_TRANSFORM */
+
+void SHA256_Transform(SHA256_CTX* context, const sha2_word32* data) {
+ sha2_word32 a, b, c, d, e, f, g, h, s0, s1;
+ sha2_word32 T1, T2, *W256;
+ int j;
+
+ W256 = (sha2_word32*)context->buffer;
+
+ /* Initialize registers with the prev. intermediate value */
+ a = context->state[0];
+ b = context->state[1];
+ c = context->state[2];
+ d = context->state[3];
+ e = context->state[4];
+ f = context->state[5];
+ g = context->state[6];
+ h = context->state[7];
+
+ j = 0;
+ do {
+#if BYTE_ORDER == LITTLE_ENDIAN
+ /* Copy data while converting to host byte order */
+ REVERSE32(*data++,W256[j]);
+ /* Apply the SHA-256 compression function to update a..h */
+ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + W256[j];
+#else /* BYTE_ORDER == LITTLE_ENDIAN */
+ /* Apply the SHA-256 compression function to update a..h with copy */
+ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + (W256[j] = *data++);
+#endif /* BYTE_ORDER == LITTLE_ENDIAN */
+ T2 = Sigma0_256(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+
+ j++;
+ } while (j < 16);
+
+ do {
+ /* Part of the message block expansion: */
+ s0 = W256[(j+1)&0x0f];
+ s0 = sigma0_256(s0);
+ s1 = W256[(j+14)&0x0f];
+ s1 = sigma1_256(s1);
+
+ /* Apply the SHA-256 compression function to update a..h */
+ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] +
+ (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0);
+ T2 = Sigma0_256(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+
+ j++;
+ } while (j < 64);
+
+ /* Compute the current intermediate hash value */
+ context->state[0] += a;
+ context->state[1] += b;
+ context->state[2] += c;
+ context->state[3] += d;
+ context->state[4] += e;
+ context->state[5] += f;
+ context->state[6] += g;
+ context->state[7] += h;
+
+ /* Clean up */
+ a = b = c = d = e = f = g = h = T1 = T2 = 0;
+}
+
+#endif /* SHA2_UNROLL_TRANSFORM */
+
+void SHA256_Update(SHA256_CTX* context, const sha2_byte *data, size_t len) {
+ unsigned int freespace, usedspace;
+
+ if (len == 0) {
+ /* Calling with no data is valid - we do nothing */
+ return;
+ }
+
+ /* Sanity check: */
+ assert(context != (SHA256_CTX*)0 && data != (sha2_byte*)0);
+
+ usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH;
+ if (usedspace > 0) {
+ /* Calculate how much free space is available in the buffer */
+ freespace = SHA256_BLOCK_LENGTH - usedspace;
+
+ if (len >= freespace) {
+ /* Fill the buffer completely and process it */
+ MEMCPY_BCOPY(&context->buffer[usedspace], data, freespace);
+ context->bitcount += freespace << 3;
+ len -= freespace;
+ data += freespace;
+ SHA256_Transform(context, (sha2_word32*)context->buffer);
+ } else {
+ /* The buffer is not yet full */
+ MEMCPY_BCOPY(&context->buffer[usedspace], data, len);
+ context->bitcount += len << 3;
+ /* Clean up: */
+ usedspace = freespace = 0;
+ return;
+ }
+ }
+ while (len >= SHA256_BLOCK_LENGTH) {
+ /* Process as many complete blocks as we can */
+ SHA256_Transform(context, (sha2_word32*)data);
+ context->bitcount += SHA256_BLOCK_LENGTH << 3;
+ len -= SHA256_BLOCK_LENGTH;
+ data += SHA256_BLOCK_LENGTH;
+ }
+ if (len > 0) {
+ /* There's left-overs, so save 'em */
+ MEMCPY_BCOPY(context->buffer, data, len);
+ context->bitcount += len << 3;
+ }
+ /* Clean up: */
+ usedspace = freespace = 0;
+}
+
+void SHA256_Final(sha2_byte digest[], SHA256_CTX* context) {
+ sha2_word32 *d = (sha2_word32*)digest;
+ unsigned int usedspace;
+
+ /* Sanity check: */
+ assert(context != (SHA256_CTX*)0);
+
+ /* If no digest buffer is passed, we don't bother doing this: */
+ if (digest != (sha2_byte*)0) {
+ usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH;
+#if BYTE_ORDER == LITTLE_ENDIAN
+ /* Convert FROM host byte order */
+ REVERSE64(context->bitcount,context->bitcount);
+#endif
+ if (usedspace > 0) {
+ /* Begin padding with a 1 bit: */
+ context->buffer[usedspace++] = 0x80;
+
+ if (usedspace <= SHA256_SHORT_BLOCK_LENGTH) {
+ /* Set-up for the last transform: */
+ MEMSET_BZERO(&context->buffer[usedspace], SHA256_SHORT_BLOCK_LENGTH - usedspace);
+ } else {
+ if (usedspace < SHA256_BLOCK_LENGTH) {
+ MEMSET_BZERO(&context->buffer[usedspace], SHA256_BLOCK_LENGTH - usedspace);
+ }
+ /* Do second-to-last transform: */
+ SHA256_Transform(context, (sha2_word32*)context->buffer);
+
+ /* And set-up for the last transform: */
+ MEMSET_BZERO(context->buffer, SHA256_SHORT_BLOCK_LENGTH);
+ }
+ } else {
+ /* Set-up for the last transform: */
+ MEMSET_BZERO(context->buffer, SHA256_SHORT_BLOCK_LENGTH);
+
+ /* Begin padding with a 1 bit: */
+ *context->buffer = 0x80;
+ }
+ /* Set the bit count: */
+ *(sha2_word64*)&context->buffer[SHA256_SHORT_BLOCK_LENGTH] = context->bitcount;
+
+ /* Final transform: */
+ SHA256_Transform(context, (sha2_word32*)context->buffer);
+
+#if BYTE_ORDER == LITTLE_ENDIAN
+ {
+ /* Convert TO host byte order */
+ int j;
+ for (j = 0; j < 8; j++) {
+ REVERSE32(context->state[j],context->state[j]);
+ *d++ = context->state[j];
+ }
+ }
+#else
+ MEMCPY_BCOPY(d, context->state, SHA256_DIGEST_LENGTH);
+#endif
+ }
+
+ /* Clean up state data: */
+ MEMSET_BZERO(context, sizeof(context));
+ usedspace = 0;
+}
+
+char *SHA256_End(SHA256_CTX* context, char buffer[]) {
+ sha2_byte digest[SHA256_DIGEST_LENGTH], *d = digest;
+ int i;
+
+ /* Sanity check: */
+ assert(context != (SHA256_CTX*)0);
+
+ if (buffer != (char*)0) {
+ SHA256_Final(digest, context);
+
+ for (i = 0; i < SHA256_DIGEST_LENGTH; i++) {
+ *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
+ *buffer++ = sha2_hex_digits[*d & 0x0f];
+ d++;
+ }
+ *buffer = (char)0;
+ } else {
+ MEMSET_BZERO(context, sizeof(context));
+ }
+ MEMSET_BZERO(digest, SHA256_DIGEST_LENGTH);
+ return buffer;
+}
+
+char* SHA256_Data(const sha2_byte* data, size_t len, char digest[SHA256_DIGEST_STRING_LENGTH]) {
+ SHA256_CTX context;
+
+ SHA256_Init(&context);
+ SHA256_Update(&context, data, len);
+ return SHA256_End(&context, digest);
+}
+
+
+/*** SHA-512: *********************************************************/
+void SHA512_Init(SHA512_CTX* context) {
+ if (context == (SHA512_CTX*)0) {
+ return;
+ }
+ MEMCPY_BCOPY(context->state, sha512_initial_hash_value, SHA512_DIGEST_LENGTH);
+ MEMSET_BZERO(context->buffer, SHA512_BLOCK_LENGTH);
+ context->bitcount[0] = context->bitcount[1] = 0;
+}
+
+#ifdef SHA2_UNROLL_TRANSFORM
+
+/* Unrolled SHA-512 round macros: */
+#if BYTE_ORDER == LITTLE_ENDIAN
+
+#define ROUND512_0_TO_15(a,b,c,d,e,f,g,h) \
+ REVERSE64(*data++, W512[j]); \
+ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + \
+ K512[j] + W512[j]; \
+ (d) += T1, \
+ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)), \
+ j++
+
+
+#else /* BYTE_ORDER == LITTLE_ENDIAN */
+
+#define ROUND512_0_TO_15(a,b,c,d,e,f,g,h) \
+ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + \
+ K512[j] + (W512[j] = *data++); \
+ (d) += T1; \
+ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)); \
+ j++
+
+#endif /* BYTE_ORDER == LITTLE_ENDIAN */
+
+#define ROUND512(a,b,c,d,e,f,g,h) \
+ s0 = W512[(j+1)&0x0f]; \
+ s0 = sigma0_512(s0); \
+ s1 = W512[(j+14)&0x0f]; \
+ s1 = sigma1_512(s1); \
+ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + K512[j] + \
+ (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0); \
+ (d) += T1; \
+ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)); \
+ j++
+
+void SHA512_Transform(SHA512_CTX* context, const sha2_word64* data) {
+ sha2_word64 a, b, c, d, e, f, g, h, s0, s1;
+ sha2_word64 T1, *W512 = (sha2_word64*)context->buffer;
+ int j;
+
+ /* Initialize registers with the prev. intermediate value */
+ a = context->state[0];
+ b = context->state[1];
+ c = context->state[2];
+ d = context->state[3];
+ e = context->state[4];
+ f = context->state[5];
+ g = context->state[6];
+ h = context->state[7];
+
+ j = 0;
+ do {
+ ROUND512_0_TO_15(a,b,c,d,e,f,g,h);
+ ROUND512_0_TO_15(h,a,b,c,d,e,f,g);
+ ROUND512_0_TO_15(g,h,a,b,c,d,e,f);
+ ROUND512_0_TO_15(f,g,h,a,b,c,d,e);
+ ROUND512_0_TO_15(e,f,g,h,a,b,c,d);
+ ROUND512_0_TO_15(d,e,f,g,h,a,b,c);
+ ROUND512_0_TO_15(c,d,e,f,g,h,a,b);
+ ROUND512_0_TO_15(b,c,d,e,f,g,h,a);
+ } while (j < 16);
+
+ /* Now for the remaining rounds up to 79: */
+ do {
+ ROUND512(a,b,c,d,e,f,g,h);
+ ROUND512(h,a,b,c,d,e,f,g);
+ ROUND512(g,h,a,b,c,d,e,f);
+ ROUND512(f,g,h,a,b,c,d,e);
+ ROUND512(e,f,g,h,a,b,c,d);
+ ROUND512(d,e,f,g,h,a,b,c);
+ ROUND512(c,d,e,f,g,h,a,b);
+ ROUND512(b,c,d,e,f,g,h,a);
+ } while (j < 80);
+
+ /* Compute the current intermediate hash value */
+ context->state[0] += a;
+ context->state[1] += b;
+ context->state[2] += c;
+ context->state[3] += d;
+ context->state[4] += e;
+ context->state[5] += f;
+ context->state[6] += g;
+ context->state[7] += h;
+
+ /* Clean up */
+ a = b = c = d = e = f = g = h = T1 = 0;
+}
+
+#else /* SHA2_UNROLL_TRANSFORM */
+
+void SHA512_Transform(SHA512_CTX* context, const sha2_word64* data) {
+ sha2_word64 a, b, c, d, e, f, g, h, s0, s1;
+ sha2_word64 T1, T2, *W512 = (sha2_word64*)context->buffer;
+ int j;
+
+ /* Initialize registers with the prev. intermediate value */
+ a = context->state[0];
+ b = context->state[1];
+ c = context->state[2];
+ d = context->state[3];
+ e = context->state[4];
+ f = context->state[5];
+ g = context->state[6];
+ h = context->state[7];
+
+ j = 0;
+ do {
+#if BYTE_ORDER == LITTLE_ENDIAN
+ /* Convert TO host byte order */
+ REVERSE64(*data++, W512[j]);
+ /* Apply the SHA-512 compression function to update a..h */
+ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + W512[j];
+#else /* BYTE_ORDER == LITTLE_ENDIAN */
+ /* Apply the SHA-512 compression function to update a..h with copy */
+ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + (W512[j] = *data++);
+#endif /* BYTE_ORDER == LITTLE_ENDIAN */
+ T2 = Sigma0_512(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+
+ j++;
+ } while (j < 16);
+
+ do {
+ /* Part of the message block expansion: */
+ s0 = W512[(j+1)&0x0f];
+ s0 = sigma0_512(s0);
+ s1 = W512[(j+14)&0x0f];
+ s1 = sigma1_512(s1);
+
+ /* Apply the SHA-512 compression function to update a..h */
+ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] +
+ (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0);
+ T2 = Sigma0_512(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+
+ j++;
+ } while (j < 80);
+
+ /* Compute the current intermediate hash value */
+ context->state[0] += a;
+ context->state[1] += b;
+ context->state[2] += c;
+ context->state[3] += d;
+ context->state[4] += e;
+ context->state[5] += f;
+ context->state[6] += g;
+ context->state[7] += h;
+
+ /* Clean up */
+ a = b = c = d = e = f = g = h = T1 = T2 = 0;
+}
+
+#endif /* SHA2_UNROLL_TRANSFORM */
+
+void SHA512_Update(SHA512_CTX* context, const sha2_byte *data, size_t len) {
+ unsigned int freespace, usedspace;
+
+ if (len == 0) {
+ /* Calling with no data is valid - we do nothing */
+ return;
+ }
+
+ /* Sanity check: */
+ assert(context != (SHA512_CTX*)0 && data != (sha2_byte*)0);
+
+ usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH;
+ if (usedspace > 0) {
+ /* Calculate how much free space is available in the buffer */
+ freespace = SHA512_BLOCK_LENGTH - usedspace;
+
+ if (len >= freespace) {
+ /* Fill the buffer completely and process it */
+ MEMCPY_BCOPY(&context->buffer[usedspace], data, freespace);
+ ADDINC128(context->bitcount, freespace << 3);
+ len -= freespace;
+ data += freespace;
+ SHA512_Transform(context, (sha2_word64*)context->buffer);
+ } else {
+ /* The buffer is not yet full */
+ MEMCPY_BCOPY(&context->buffer[usedspace], data, len);
+ ADDINC128(context->bitcount, len << 3);
+ /* Clean up: */
+ usedspace = freespace = 0;
+ return;
+ }
+ }
+ while (len >= SHA512_BLOCK_LENGTH) {
+ /* Process as many complete blocks as we can */
+ SHA512_Transform(context, (sha2_word64*)data);
+ ADDINC128(context->bitcount, SHA512_BLOCK_LENGTH << 3);
+ len -= SHA512_BLOCK_LENGTH;
+ data += SHA512_BLOCK_LENGTH;
+ }
+ if (len > 0) {
+ /* There's left-overs, so save 'em */
+ MEMCPY_BCOPY(context->buffer, data, len);
+ ADDINC128(context->bitcount, len << 3);
+ }
+ /* Clean up: */
+ usedspace = freespace = 0;
+}
+
+void SHA512_Last(SHA512_CTX* context) {
+ unsigned int usedspace;
+
+ usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH;
+#if BYTE_ORDER == LITTLE_ENDIAN
+ /* Convert FROM host byte order */
+ REVERSE64(context->bitcount[0],context->bitcount[0]);
+ REVERSE64(context->bitcount[1],context->bitcount[1]);
+#endif
+ if (usedspace > 0) {
+ /* Begin padding with a 1 bit: */
+ context->buffer[usedspace++] = 0x80;
+
+ if (usedspace <= SHA512_SHORT_BLOCK_LENGTH) {
+ /* Set-up for the last transform: */
+ MEMSET_BZERO(&context->buffer[usedspace], SHA512_SHORT_BLOCK_LENGTH - usedspace);
+ } else {
+ if (usedspace < SHA512_BLOCK_LENGTH) {
+ MEMSET_BZERO(&context->buffer[usedspace], SHA512_BLOCK_LENGTH - usedspace);
+ }
+ /* Do second-to-last transform: */
+ SHA512_Transform(context, (sha2_word64*)context->buffer);
+
+ /* And set-up for the last transform: */
+ MEMSET_BZERO(context->buffer, SHA512_BLOCK_LENGTH - 2);
+ }
+ } else {
+ /* Prepare for final transform: */
+ MEMSET_BZERO(context->buffer, SHA512_SHORT_BLOCK_LENGTH);
+
+ /* Begin padding with a 1 bit: */
+ *context->buffer = 0x80;
+ }
+ /* Store the length of input data (in bits): */
+ *(sha2_word64*)&context->buffer[SHA512_SHORT_BLOCK_LENGTH] = context->bitcount[1];
+ *(sha2_word64*)&context->buffer[SHA512_SHORT_BLOCK_LENGTH+8] = context->bitcount[0];
+
+ /* Final transform: */
+ SHA512_Transform(context, (sha2_word64*)context->buffer);
+}
+
+void SHA512_Final(sha2_byte digest[], SHA512_CTX* context) {
+ sha2_word64 *d = (sha2_word64*)digest;
+
+ /* Sanity check: */
+ assert(context != (SHA512_CTX*)0);
+
+ /* If no digest buffer is passed, we don't bother doing this: */
+ if (digest != (sha2_byte*)0) {
+ SHA512_Last(context);
+
+ /* Save the hash data for output: */
+#if BYTE_ORDER == LITTLE_ENDIAN
+ {
+ /* Convert TO host byte order */
+ int j;
+ for (j = 0; j < 8; j++) {
+ REVERSE64(context->state[j],context->state[j]);
+ *d++ = context->state[j];
+ }
+ }
+#else
+ MEMCPY_BCOPY(d, context->state, SHA512_DIGEST_LENGTH);
+#endif
+ }
+
+ /* Zero out state data */
+ MEMSET_BZERO(context, sizeof(context));
+}
+
+char *SHA512_End(SHA512_CTX* context, char buffer[]) {
+ sha2_byte digest[SHA512_DIGEST_LENGTH], *d = digest;
+ int i;
+
+ /* Sanity check: */
+ assert(context != (SHA512_CTX*)0);
+
+ if (buffer != (char*)0) {
+ SHA512_Final(digest, context);
+
+ for (i = 0; i < SHA512_DIGEST_LENGTH; i++) {
+ *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
+ *buffer++ = sha2_hex_digits[*d & 0x0f];
+ d++;
+ }
+ *buffer = (char)0;
+ } else {
+ MEMSET_BZERO(context, sizeof(context));
+ }
+ MEMSET_BZERO(digest, SHA512_DIGEST_LENGTH);
+ return buffer;
+}
+
+char* SHA512_Data(const sha2_byte* data, size_t len, char digest[SHA512_DIGEST_STRING_LENGTH]) {
+ SHA512_CTX context;
+
+ SHA512_Init(&context);
+ SHA512_Update(&context, data, len);
+ return SHA512_End(&context, digest);
+}
+
+
+/*** SHA-384: *********************************************************/
+void SHA384_Init(SHA384_CTX* context) {
+ if (context == (SHA384_CTX*)0) {
+ return;
+ }
+ MEMCPY_BCOPY(context->state, sha384_initial_hash_value, SHA512_DIGEST_LENGTH);
+ MEMSET_BZERO(context->buffer, SHA384_BLOCK_LENGTH);
+ context->bitcount[0] = context->bitcount[1] = 0;
+}
+
+void SHA384_Update(SHA384_CTX* context, const sha2_byte* data, size_t len) {
+ SHA512_Update((SHA512_CTX*)context, data, len);
+}
+
+void SHA384_Final(sha2_byte digest[], SHA384_CTX* context) {
+ sha2_word64 *d = (sha2_word64*)digest;
+
+ /* Sanity check: */
+ assert(context != (SHA384_CTX*)0);
+
+ /* If no digest buffer is passed, we don't bother doing this: */
+ if (digest != (sha2_byte*)0) {
+ SHA512_Last((SHA512_CTX*)context);
+
+ /* Save the hash data for output: */
+#if BYTE_ORDER == LITTLE_ENDIAN
+ {
+ /* Convert TO host byte order */
+ int j;
+ for (j = 0; j < 6; j++) {
+ REVERSE64(context->state[j],context->state[j]);
+ *d++ = context->state[j];
+ }
+ }
+#else
+ MEMCPY_BCOPY(d, context->state, SHA384_DIGEST_LENGTH);
+#endif
+ }
+
+ /* Zero out state data */
+ MEMSET_BZERO(context, sizeof(context));
+}
+
+char *SHA384_End(SHA384_CTX* context, char buffer[]) {
+ sha2_byte digest[SHA384_DIGEST_LENGTH], *d = digest;
+ int i;
+
+ /* Sanity check: */
+ assert(context != (SHA384_CTX*)0);
+
+ if (buffer != (char*)0) {
+ SHA384_Final(digest, context);
+
+ for (i = 0; i < SHA384_DIGEST_LENGTH; i++) {
+ *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
+ *buffer++ = sha2_hex_digits[*d & 0x0f];
+ d++;
+ }
+ *buffer = (char)0;
+ } else {
+ MEMSET_BZERO(context, sizeof(context));
+ }
+ MEMSET_BZERO(digest, SHA384_DIGEST_LENGTH);
+ return buffer;
+}
+
+char* SHA384_Data(const sha2_byte* data, size_t len, char digest[SHA384_DIGEST_STRING_LENGTH]) {
+ SHA384_CTX context;
+
+ SHA384_Init(&context);
+ SHA384_Update(&context, data, len);
+ return SHA384_End(&context, digest);
+}
+
projects / openldap / commitdiff