Kinetis: kinetis_ftfx_command() based on target instead of flash bank

kinetis_ftfx_command() did not use other struct flash_bank* members
than base->target. Switching first parameter to struct target*
enables use of kinetis_ftfx_command() without unnecessary bank
getting and probing.

Removed kinetis_securing_test: kind of dead code, same function
as command flash erase_address pad 0x400 0x10

Removed "NAND" word from help as flash is obviously NOR

Change-Id: I3f5fc295ef2bf42f3e913549949f2a36377f6367
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2988
Tested-by: jenkins

diff --git a/src/flash/nor/kinetis.c b/src/flash/nor/kinetis.c
index a1614d38b2deff1d7884a3ffce972fa56e9a6a46..5b618c03e30d7a4b8a0d45ea932a81156a7058e9 100644 (file)
--- a/src/flash/nor/kinetis.c
+++ b/src/flash/nor/kinetis.c
@@ -874,7 +874,7 @@ static int kinetis_protect_check(struct flash_bank *bank)
        return ERROR_OK;
 }
 
-static int kinetis_ftfx_command(struct flash_bank *bank, uint8_t fcmd, uint32_t faddr,
+static int kinetis_ftfx_command(struct target *target, uint8_t fcmd, uint32_t faddr,
                                uint8_t fccob4, uint8_t fccob5, uint8_t fccob6, uint8_t fccob7,
                                uint8_t fccob8, uint8_t fccob9, uint8_t fccoba, uint8_t fccobb,
                                uint8_t *ftfx_fstat)
@@ -888,7 +888,7 @@ static int kinetis_ftfx_command(struct flash_bank *bank, uint8_t fcmd, uint32_t
        /* wait for done */
        for (i = 0; i < 50; i++) {
                result =
-                       target_read_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
+                       target_read_memory(target, FTFx_FSTAT, 1, 1, &buffer);
 
                if (result != ERROR_OK)
                        return result;
@@ -903,26 +903,26 @@ static int kinetis_ftfx_command(struct flash_bank *bank, uint8_t fcmd, uint32_t
                /* reset error flags */
                buffer = 0x30;
                result =
-                       target_write_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
+                       target_write_memory(target, FTFx_FSTAT, 1, 1, &buffer);
                if (result != ERROR_OK)
                        return result;
        }
 
-       result = target_write_memory(bank->target, FTFx_FCCOB3, 4, 3, command);
+       result = target_write_memory(target, FTFx_FCCOB3, 4, 3, command);
 
        if (result != ERROR_OK)
                return result;
 
        /* start command */
        buffer = 0x80;
-       result = target_write_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
+       result = target_write_memory(target, FTFx_FSTAT, 1, 1, &buffer);
        if (result != ERROR_OK)
                return result;
 
        /* wait for done */
        for (i = 0; i < 240; i++) { /* Need longtime for "Mass Erase" Command Nemui Changed */
                result =
-                       target_read_memory(bank->target, FTFx_FSTAT, 1, 1, ftfx_fstat);
+                       target_read_memory(target, FTFx_FSTAT, 1, 1, ftfx_fstat);
 
                if (result != ERROR_OK)
                        return result;
@@ -943,27 +943,6 @@ static int kinetis_ftfx_command(struct flash_bank *bank, uint8_t fcmd, uint32_t
        return ERROR_OK;
 }
 
-COMMAND_HANDLER(kinetis_securing_test)
-{
-       int result;
-       uint8_t ftfx_fstat;
-       struct target *target = get_current_target(CMD_CTX);
-       struct flash_bank *bank = NULL;
-
-       result = get_flash_bank_by_addr(target, 0x00000000, true, &bank);
-       if (result != ERROR_OK)
-               return result;
-
-       assert(bank != NULL);
-
-       if (target->state != TARGET_HALTED) {
-               LOG_ERROR("Target not halted");
-               return ERROR_TARGET_NOT_HALTED;
-       }
-
-       return kinetis_ftfx_command(bank, FTFx_CMD_SECTERASE, bank->base + 0x00000400,
-                                     0, 0, 0, 0,  0, 0, 0, 0,  &ftfx_fstat);
-}
 
 static int kinetis_erase(struct flash_bank *bank, int first, int last)
 {
@@ -986,7 +965,7 @@ static int kinetis_erase(struct flash_bank *bank, int first, int last)
        for (i = first; i <= last; i++) {
                uint8_t ftfx_fstat;
                /* set command and sector address */
-               result = kinetis_ftfx_command(bank, FTFx_CMD_SECTERASE, kinfo->prog_base + bank->sectors[i].offset,
+               result = kinetis_ftfx_command(bank->target, FTFx_CMD_SECTERASE, kinfo->prog_base + bank->sectors[i].offset,
                                0, 0, 0, 0,  0, 0, 0, 0,  &ftfx_fstat);
 
                if (result != ERROR_OK) {
@@ -1031,7 +1010,8 @@ static int kinetis_write(struct flash_bank *bank, const uint8_t *buffer,
                LOG_DEBUG("flash write into FlexNVM @%08" PRIX32, offset);
 
                /* make flex ram available */
-               result = kinetis_ftfx_command(bank, FTFx_CMD_SETFLEXRAM, 0x00ff0000, 0, 0, 0, 0,  0, 0, 0, 0,  &ftfx_fstat);
+               result = kinetis_ftfx_command(bank->target, FTFx_CMD_SETFLEXRAM, 0x00ff0000,
+                               0, 0, 0, 0,  0, 0, 0, 0,  &ftfx_fstat);
 
                if (result != ERROR_OK)
                        return ERROR_FLASH_OPERATION_FAILED;
@@ -1126,7 +1106,7 @@ static int kinetis_write(struct flash_bank *bank, const uint8_t *buffer,
                        }
 
                        /* execute section-write command */
-                       result = kinetis_ftfx_command(bank, FTFx_CMD_SECTWRITE, kinfo->prog_base + offset + i,
+                       result = kinetis_ftfx_command(bank->target, FTFx_CMD_SECTWRITE, kinfo->prog_base + offset + i,
                                        section_count>>8, section_count, 0, 0,
                                        0, 0, 0, 0,  &ftfx_fstat);
 
@@ -1172,7 +1152,7 @@ static int kinetis_write(struct flash_bank *bank, const uint8_t *buffer,
                                uint8_t padding[4] = {0xff, 0xff, 0xff, 0xff};
                                memcpy(padding, buffer + i, MIN(4, count-i));
 
-                               result = kinetis_ftfx_command(bank, FTFx_CMD_LWORDPROG, kinfo->prog_base + offset + i,
+                               result = kinetis_ftfx_command(bank->target, FTFx_CMD_LWORDPROG, kinfo->prog_base + offset + i,
                                                padding[3], padding[2], padding[1], padding[0],
                                                0, 0, 0, 0,  &ftfx_fstat);
 
@@ -1633,7 +1613,7 @@ static int kinetis_blank_check(struct flash_bank *bank)
 
                if (!block_dirty) {
                        /* check if whole bank is blank */
-                       result = kinetis_ftfx_command(bank, FTFx_CMD_BLOCKSTAT, kinfo->prog_base,
+                       result = kinetis_ftfx_command(bank->target, FTFx_CMD_BLOCKSTAT, kinfo->prog_base,
                                                         0, 0, 0, 0,  0, 0, 0, 0, &ftfx_fstat);
 
                        if (result != ERROR_OK || (ftfx_fstat & 0x01))
@@ -1645,7 +1625,8 @@ static int kinetis_blank_check(struct flash_bank *bank)
                        int i;
                        for (i = 0; i < bank->num_sectors; i++) {
                                /* normal margin */
-                               result = kinetis_ftfx_command(bank, FTFx_CMD_SECTSTAT, kinfo->prog_base + bank->sectors[i].offset,
+                               result = kinetis_ftfx_command(bank->target, FTFx_CMD_SECTSTAT,
+                                               kinfo->prog_base + bank->sectors[i].offset,
                                                1, 0, 0, 0,  0, 0, 0, 0, &ftfx_fstat);
 
                                if (result == ERROR_OK) {
@@ -1684,13 +1665,6 @@ static const struct command_registration kinetis_securtiy_command_handlers[] = {
                .usage = "",
                .handler = kinetis_mdm_mass_erase,
        },
-       {
-               .name = "test_securing",
-               .mode = COMMAND_EXEC,
-               .help = "",
-               .usage = "",
-               .handler = kinetis_securing_test,
-       },
        COMMAND_REGISTRATION_DONE
 };
 
@@ -1716,7 +1690,7 @@ static const struct command_registration kinetis_command_handler[] = {
        {
                .name = "kinetis",
                .mode = COMMAND_ANY,
-               .help = "kinetis NAND flash controller commands",
+               .help = "kinetis flash controller commands",
                .usage = "",
                .chain = kinetis_exec_command_handlers,
        },