return 0;
}
-/*
- * Unconditionally perform a database recovery. Only works on
- * databases that were previously opened with transactions and
- * logs enabled.
- */
-static int
-bdb_do_recovery( BackendDB *be )
-{
- struct bdb_info *bdb = (struct bdb_info *) be->be_private;
- DB_ENV *re_dbenv;
- u_int32_t flags;
- int rc;
- char path[MAXPATHLEN], *ptr;
-
- /* Create and init the recovery environment */
- rc = db_env_create( &re_dbenv, 0 );
- if( rc != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_do_recovery: db_env_create failed: %s (%d)\n",
- db_strerror(rc), rc, 0 );
- return rc;
- }
- re_dbenv->set_errpfx( re_dbenv, be->be_suffix[0].bv_val );
- re_dbenv->set_errcall( re_dbenv, bdb_errcall );
- (void)re_dbenv->set_verbose(re_dbenv, DB_VERB_RECOVERY, 1);
-#if DB_VERSION_FULL < 0x04030000
- (void)re_dbenv->set_verbose(re_dbenv, DB_VERB_CHKPOINT, 1);
-#else
- re_dbenv->set_msgcall( re_dbenv, bdb_msgcall );
-#endif
-
- flags = DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL |
- DB_INIT_TXN | DB_USE_ENVIRON | DB_RECOVER;
-
- /* If a key was set, use shared memory for the BDB environment */
- if ( bdb->bi_shm_key ) {
- re_dbenv->set_shm_key( re_dbenv, bdb->bi_shm_key );
- flags |= DB_SYSTEM_MEM;
- }
-
- /* Open the environment, which will also perform the recovery */
-#ifdef HAVE_EBCDIC
- strcpy( path, bdb->bi_dbenv_home );
- __atoe( path );
- rc = re_dbenv->open( re_dbenv,
- path,
- flags,
- bdb->bi_dbenv_mode );
-#else
- rc = re_dbenv->open( re_dbenv,
- bdb->bi_dbenv_home,
- flags,
- bdb->bi_dbenv_mode );
-#endif
- if( rc != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_do_recovery: dbenv_open failed: %s (%d)\n",
- db_strerror(rc), rc, 0 );
- return rc;
- }
- (void) re_dbenv->close( re_dbenv, 0 );
-
- /* By convention we reset the mtime for id2entry.bdb to the current time */
- ptr = lutil_strcopy( path, bdb->bi_dbenv_home);
- *ptr++ = LDAP_DIRSEP[0];
- strcpy( ptr, bdbi_databases[0].file);
- (void) utime( path, NULL);
-
- return 0;
-}
-
-/*
- * Database recovery logic:
- * This function is called whenever the database appears to have been
- * shut down uncleanly, as determined by the alock functions.
- * Because of the -q function in slapadd, there is also the possibility
- * that the shutdown happened when transactions weren't being used and
- * the database is likely to be corrupt. The function checks for this
- * condition by examining the environment to make sure it had previously
- * been opened with transactions enabled. If this is the case, the
- * database is recovered as usual. If transactions were not enabled,
- * then this function will return a fail.
- */
-static int
-bdb_db_recover( BackendDB *be )
-{
- struct bdb_info *bdb = (struct bdb_info *) be->be_private;
- DB_ENV *re_dbenv;
- u_int32_t flags;
- int rc;
-#ifdef HAVE_EBCDIC
- char path[MAXPATHLEN];
-#endif
-
- /* Create the recovery environment, then open it.
- * We use the DB_JOIN in combination with a flags value of
- * zero so we join an existing environment and can read the
- * value of the flags that were used the last time the
- * environment was opened. DB_CREATE is added because the
- * open would fail if the only thing that had been done
- * was an open with transactions and logs disabled.
- */
- rc = db_env_create( &re_dbenv, 0 );
- if( rc != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_recover: db_env_create failed: %s (%d)\n",
- db_strerror(rc), rc, 0 );
- return rc;
- }
- re_dbenv->set_errpfx( re_dbenv, be->be_suffix[0].bv_val );
- re_dbenv->set_errcall( re_dbenv, bdb_errcall );
-
- Debug( LDAP_DEBUG_TRACE,
- "bdb_db_recover: dbenv_open(%s)\n",
- bdb->bi_dbenv_home, 0, 0);
-
-#ifdef HAVE_EBCDIC
- strcpy( path, bdb->bi_dbenv_home );
- __atoe( path );
- rc = re_dbenv->open( re_dbenv,
- path,
- DB_JOINENV,
- bdb->bi_dbenv_mode );
-#else
- rc = re_dbenv->open( re_dbenv,
- bdb->bi_dbenv_home,
- DB_JOINENV,
- bdb->bi_dbenv_mode );
-#endif
-
- if( rc == ENOENT ) {
- Debug( LDAP_DEBUG_TRACE,
- "bdb_db_recover: DB environment files are missing, assuming it was "
- "manually recovered\n", 0, 0, 0 );
- return 0;
- }
- else if( rc != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_recover: dbenv_open failed: %s (%d)\n",
- db_strerror(rc), rc, 0 );
- return rc;
- }
-
- /*
- * Check the flags that had been used in the previous open.
- * The environment needed to have had both
- * DB_INIT_LOG and DB_INIT_TXN set for us to be willing to
- * recover the database. Otherwise the an app failed while running
- * without transactions and logs enabled and the dn2id and id2entry
- * mapping is likely to be corrupt.
- */
- rc = re_dbenv->get_open_flags( re_dbenv, &flags );
- if( rc != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_recover: get_open_flags failed: %s (%d)\n",
- db_strerror(rc), rc, 0 );
- return rc;
- }
-
- (void) re_dbenv->close( re_dbenv, 0 );
-
- if( (flags & DB_INIT_LOG) && (flags & DB_INIT_TXN) ) {
- return bdb_do_recovery( be );
- }
-
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_recover: Database cannot be recovered. "\
- "Restore from backup!\n", 0, 0, 0);
- return -1;
-
-}
-
-
static int
bdb_db_open( BackendDB *be )
{
struct stat stat1, stat2;
u_int32_t flags;
char path[MAXPATHLEN];
- char *ptr;
+ char *dbhome;
+ int do_recover = 0, do_alock_recover = 0, open_env = 1, got_env = 0;
if ( be->be_suffix == NULL ) {
Debug( LDAP_DEBUG_ANY,
bdb->bi_dbenv_home, errno, 0 );
return -1;
}
-
+
/* Perform database use arbitration/recovery logic */
rc = alock_open( &bdb->bi_alock_info,
"slapd",
"bdb_db_open: unclean shutdown detected;"
" attempting recovery.\n",
0, 0, 0 );
- if( bdb_db_recover( be ) != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_open: DB recovery failed.\n",
- 0, 0, 0 );
- return -1;
- }
- if( alock_recover (&bdb->bi_alock_info) != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_open: alock_recover failed\n",
- 0, 0, 0 );
- return -1;
- }
-
+ do_alock_recover = 1;
+ do_recover = 1;
} else if( rc == ALOCK_BUSY ) {
Debug( LDAP_DEBUG_ANY,
"bdb_db_open: database already in use\n",
0, 0, 0 );
return -1;
}
-
+
/*
* The DB_CONFIG file may have changed. If so, recover the
* database so that new settings are put into effect. Also
* note the possible absence of DB_CONFIG in the log.
*/
if( stat( bdb->bi_db_config_path, &stat1 ) == 0 ) {
- ptr = lutil_strcopy(path, bdb->bi_dbenv_home);
- *ptr++ = LDAP_DIRSEP[0];
- strcpy( ptr, bdbi_databases[0].file);
- if( stat( path, &stat2 ) == 0 ) {
- if( stat2.st_mtime <= stat1.st_mtime ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_open: DB_CONFIG for suffix %s has changed.\n"
- "Performing database recovery to activate new settings.\n",
- be->be_suffix[0].bv_val, 0, 0 );
- if( bdb_do_recovery( be ) != 0) {
+ if ( !do_recover ) {
+ char *ptr = lutil_strcopy(path, bdb->bi_dbenv_home);
+ *ptr++ = LDAP_DIRSEP[0];
+ strcpy( ptr, "__db.001" );
+ if( stat( path, &stat2 ) == 0 ) {
+ if( stat2.st_mtime <= stat1.st_mtime ) {
Debug( LDAP_DEBUG_ANY,
- "bdb_db_open: db recovery failed.\n",
- 0, 0, 0 );
- return -1;
+ "bdb_db_open: DB_CONFIG for suffix %s has changed.\n"
+ "Performing database recovery to activate new settings.\n",
+ be->be_suffix[0].bv_val, 0, 0 );
+ do_recover = 1;
}
}
-
}
}
else {
"Expect poor performance for suffix %s.\n",
bdb->bi_dbenv_home, errno, be->be_suffix[0].bv_val );
}
-
- flags = DB_INIT_MPOOL | DB_THREAD | DB_CREATE;
- if ( !( slapMode & SLAP_TOOL_QUICK ))
- flags |= DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_TXN;
rc = db_env_create( &bdb->bi_dbenv, 0 );
if( rc != 0 ) {
return rc;
}
- /* If a key was set, use shared memory for the BDB environment */
- if ( bdb->bi_shm_key ) {
- bdb->bi_dbenv->set_shm_key( bdb->bi_dbenv, bdb->bi_shm_key );
- flags |= DB_SYSTEM_MEM;
- }
-
bdb->bi_dbenv->set_errpfx( bdb->bi_dbenv, be->be_suffix[0].bv_val );
bdb->bi_dbenv->set_errcall( bdb->bi_dbenv, bdb_errcall );
+
bdb->bi_dbenv->set_lk_detect( bdb->bi_dbenv, bdb->bi_lock_detect );
/* One long-lived TXN per thread, two TXNs per write op */
bdb->bi_dbenv->set_tx_max( bdb->bi_dbenv, connection_pool_max * 3 );
-#ifdef SLAP_ZONE_ALLOC
- if ( bdb->bi_cache.c_maxsize ) {
- bdb->bi_cache.c_zctx = slap_zn_mem_create(
- SLAP_ZONE_INITSIZE,
- SLAP_ZONE_MAXSIZE,
- SLAP_ZONE_DELTA,
- SLAP_ZONE_SIZE);
- }
-#endif
-
- if ( bdb->bi_idl_cache_max_size ) {
- bdb->bi_idl_tree = NULL;
- bdb->bi_idl_cache_size = 0;
- }
-
if( bdb->bi_dbenv_xflags != 0 ) {
rc = bdb->bi_dbenv->set_flags( bdb->bi_dbenv,
bdb->bi_dbenv_xflags, 1);
}
}
- Debug( LDAP_DEBUG_TRACE,
- "bdb_db_open: dbenv_open(%s)\n",
- bdb->bi_dbenv_home, 0, 0);
+#define BDB_TXN_FLAGS (DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_TXN)
#ifdef HAVE_EBCDIC
strcpy( path, bdb->bi_dbenv_home );
__atoe( path );
- rc = bdb->bi_dbenv->open( bdb->bi_dbenv,
- path,
- flags,
- bdb->bi_dbenv_mode );
+ dbhome = path;
#else
- rc = bdb->bi_dbenv->open( bdb->bi_dbenv,
- bdb->bi_dbenv_home,
- flags,
- bdb->bi_dbenv_mode );
+ dbhome = bdb->bi_dbenv_home;
#endif
- if( rc != 0 ) {
+
+ Debug( LDAP_DEBUG_TRACE,
+ "bdb_db_open: dbenv_open(%s)\n",
+ bdb->bi_dbenv_home, 0, 0);
+
+ /* Check if there is a usable existing environment */
+ flags = DB_JOINENV | DB_THREAD;
+
+ rc = bdb->bi_dbenv->open( bdb->bi_dbenv, dbhome,
+ flags, bdb->bi_dbenv_mode );
+ if( rc == 0 ) {
+ int flags_ok = 0;
+
+ got_env = 1;
+
+ rc = bdb->bi_dbenv->get_open_flags( bdb->bi_dbenv, &flags );
+ if ( rc == 0 ) {
+ int flag2 = flags & BDB_TXN_FLAGS;
+
+ /* In quick mode, none of these flags are allowed */
+ if ( slapMode & SLAP_TOOL_QUICK ) {
+ if ( !flag2 )
+ flags_ok = 1;
+ } else {
+ /* In normal mode, all of these flags are required */
+ if ( flag2 == BDB_TXN_FLAGS )
+ flags_ok = 1;
+ }
+ }
+
+ /* In Quick mode, we cannot Recover... */
+ if ( slapMode & SLAP_TOOL_QUICK ) {
+ /* If we need to recover but we had no TXNs, just fail */
+ if ( do_recover && flags_ok ) {
+ Debug( LDAP_DEBUG_ANY,
+ "bdb_db_open: Database cannot be recovered. "
+ "Restore from backup!\n", 0, 0, 0);
+ return -1;
+ }
+ /* We need to recover, and we had TXN support before:
+ * Close this env, open a new one with recovery flags.
+ */
+ if ( do_recover ) {
+ bdb->bi_dbenv->close( bdb->bi_dbenv, 0 );
+ bdb->bi_dbenv = NULL;
+ rc = db_env_create( &bdb->bi_dbenv, 0 );
+ if( rc != 0 ) {
+ Debug( LDAP_DEBUG_ANY,
+ "bdb_db_open: db_env_create failed: %s (%d)\n",
+ db_strerror(rc), rc, 0 );
+ return rc;
+ }
+ bdb->bi_dbenv->set_errpfx( bdb->bi_dbenv,
+ be->be_suffix[0].bv_val );
+ bdb->bi_dbenv->set_errcall( bdb->bi_dbenv, bdb_errcall );
+ rc = bdb->bi_dbenv->open( bdb->bi_dbenv, dbhome,
+ flags | DB_RECOVER, bdb->bi_dbenv_mode );
+ if( rc != 0 ) {
+ Debug( LDAP_DEBUG_ANY,
+ "bdb_db_open: recovery failed: %s (%d)\n",
+ db_strerror(rc), rc, 0 );
+ return rc;
+ }
+ do_recover = 0;
+ }
+ /* Prev environment had TXN support, get rid of it */
+ if ( !flags_ok ) {
+ bdb->bi_dbenv->remove( bdb->bi_dbenv, dbhome, 0 );
+ bdb->bi_dbenv = NULL;
+ }
+ /* Normal TXN mode */
+ } else {
+ /* If we need to recover but we had no TXNs, just fail */
+ if ( do_recover && !flags_ok ) {
+ Debug( LDAP_DEBUG_ANY,
+ "bdb_db_open: Database cannot be recovered. "
+ "Restore from backup!\n", 0, 0, 0);
+ return -1;
+ }
+ /* Prev environment had no TXN support, close it */
+ if ( !flags_ok ) {
+ bdb->bi_dbenv->close( bdb->bi_dbenv, 0 );
+ bdb->bi_dbenv = NULL;
+ do_recover = 1;
+ }
+ }
+
+ if ( flags_ok && !do_recover ) {
+ /* This environment is fine, don't reopen it */
+ open_env = 0;
+ } else {
+ /* Create a new env that can take the desired settings */
+ rc = db_env_create( &bdb->bi_dbenv, 0 );
+ if( rc != 0 ) {
+ Debug( LDAP_DEBUG_ANY,
+ "bdb_db_open: db_env_create failed: %s (%d)\n",
+ db_strerror(rc), rc, 0 );
+ return rc;
+ }
+
+ bdb->bi_dbenv->set_errpfx( bdb->bi_dbenv, be->be_suffix[0].bv_val );
+ bdb->bi_dbenv->set_errcall( bdb->bi_dbenv, bdb_errcall );
+ bdb->bi_dbenv->set_lk_detect( bdb->bi_dbenv, bdb->bi_lock_detect );
+
+ /* One long-lived TXN per thread, two TXNs per write op */
+ bdb->bi_dbenv->set_tx_max( bdb->bi_dbenv, connection_pool_max * 3 );
+
+ if( bdb->bi_dbenv_xflags != 0 ) {
+ rc = bdb->bi_dbenv->set_flags( bdb->bi_dbenv,
+ bdb->bi_dbenv_xflags, 1);
+ if( rc != 0 ) {
+ Debug( LDAP_DEBUG_ANY,
+ "bdb_db_open: dbenv_set_flags failed: %s (%d)\n",
+ db_strerror(rc), rc, 0 );
+ return rc;
+ }
+ }
+ }
+ }
+
+ /* If we need to recover but there was no existing environment,
+ * then we assume that someone has already manually recovered using
+ * db_recover. Just ignore it.
+ */
+ if ( do_recover && !got_env ) {
+ do_recover = 0;
+ Debug( LDAP_DEBUG_TRACE,
+ "bdb_db_open: Recovery needed but environment is missing - "
+ "assuming recovery was done manually...\n", 0, 0, 0 );
+ }
+
+ if ( open_env ) {
+ flags = DB_INIT_MPOOL | DB_THREAD | DB_CREATE;
+ if ( !( slapMode & SLAP_TOOL_QUICK ))
+ flags |= BDB_TXN_FLAGS;
+
+ if ( do_recover )
+ flags |= DB_RECOVER;
+
+ /* If a key was set, use shared memory for the BDB environment */
+ if ( bdb->bi_shm_key ) {
+ bdb->bi_dbenv->set_shm_key( bdb->bi_dbenv, bdb->bi_shm_key );
+ flags |= DB_SYSTEM_MEM;
+ }
+
+ rc = bdb->bi_dbenv->open( bdb->bi_dbenv, dbhome,
+ flags, bdb->bi_dbenv_mode );
+ if( rc != 0 ) {
+ Debug( LDAP_DEBUG_ANY,
+ "bdb_db_open: dbenv_open failed: %s (%d)\n",
+ db_strerror(rc), rc, 0 );
+ return rc;
+ }
+ }
+
+ if ( do_alock_recover && alock_recover (&bdb->bi_alock_info) != 0 ) {
Debug( LDAP_DEBUG_ANY,
- "bdb_db_open: dbenv_open failed: %s (%d)\n",
- db_strerror(rc), rc, 0 );
- return rc;
+ "bdb_db_open: alock_recover failed\n",
+ 0, 0, 0 );
+ return -1;
+ }
+
+#ifdef SLAP_ZONE_ALLOC
+ if ( bdb->bi_cache.c_maxsize ) {
+ bdb->bi_cache.c_zctx = slap_zn_mem_create(
+ SLAP_ZONE_INITSIZE,
+ SLAP_ZONE_MAXSIZE,
+ SLAP_ZONE_DELTA,
+ SLAP_ZONE_SIZE);
+ }
+#endif
+
+ if ( bdb->bi_idl_cache_max_size ) {
+ bdb->bi_idl_tree = NULL;
+ bdb->bi_idl_cache_size = 0;
}
flags = DB_THREAD | bdb->bi_db_opflags;
return rc;
}
+#if 0
+ if( i == BDB_ID2ENTRY && ( slapMode & SLAP_TOOL_MODE )) {
+ db->bdi_db->mpf->set_priority( db->bdi_db->mpf,
+ DB_PRIORITY_VERY_LOW );
+ }
+#endif
+
flags &= ~(DB_CREATE | DB_RDONLY);
db->bdi_name = bdbi_databases[i].name;
bdb->bi_databases[i] = db;
db_strerror(rc), rc, 0 );
return rc;
}
-
-#if DB_VERSION_MAJOR == 4 && DB_VERSION_MINOR == 2
- /* Delete the environment if we were in quick mode. This
- * works around a bug in bdb4.2 that interferes with the
- * operation of db_stat and other tools after a slapadd -q
- * or slapindex -q has taken place.
- */
- if( slapMode & SLAP_TOOL_QUICK ) {
- rc = db_env_create( &bdb->bi_dbenv, 0 );
- if( rc != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_close: db_env_create failed: %s (%d)\n",
- db_strerror(rc), rc, 0 );
- return rc;
- }
- rc = bdb->bi_dbenv->remove(bdb->bi_dbenv, bdb->bi_dbenv_home,
- DB_FORCE);
- bdb->bi_dbenv = NULL;
- if( rc != 0 ) {
- Debug( LDAP_DEBUG_ANY,
- "bdb_db_close: dbenv_remove failed: %s (%d)\n",
- db_strerror(rc), rc, 0 );
- return rc;
- }
- }
-#endif
}
rc = alock_close( &bdb->bi_alock_info );
projects / openldap / commitdiff