slapacl \- Check access to a list of attributes.
.SH SYNOPSIS
.B SBINDIR/slapacl
-.B [\-v]
+.B \-b DN
.B [\-d level]
+.B [\-D authcDN | \-U authcID]
.B [\-f slapd.conf]
.B [\-F confdir]
-.B [\-D authcDN | \-U authcID]
-.B \-b DN
+.B [\-o name[=value]
.B [\-u]
+.B [\-v]
.B [\-X authzID | \-o authzDN=DN]
.B [attr[/access][:value]] [...]
.LP
.LP
.SH OPTIONS
.TP
-.B \-v
-enable verbose mode.
+.BI \-b " DN"
+specify the
+.B DN
+which access is requested to; the corresponding entry is fetched
+from the database, and thus it must exist.
+The DN is also used to determine what rules apply; thus, it must be
+in the naming context of a configured database. See also
+.BR \-u .
.TP
.BI \-d " level"
enable debugging messages as defined by the specified
.IR level .
.TP
+.BI \-D " authcDN"
+specify a DN to be used as identity through the test session
+when selecting appropriate
+.B <by>
+clauses in access lists.
+.TP
.BI \-f " slapd.conf"
specify an alternative
.BR slapd.conf (5)
config file. If a valid config directory exists then the
default config file is ignored.
.TP
-.BI \-D " authcDN"
-specify a DN to be used as identity through the test session
-when selecting appropriate
-.B <by>
-clauses in access lists.
-.TP
-.BI \-U " authcID"
-specify an ID to be mapped to a
-.B DN
-as by means of
-.B authz-regexp
-or
-.B authz-rewrite
-rules (see
-.BR slapd.conf (5)
-for details); mutually exclusive with
-.BR \-D .
-.TP
-.BI \-X " authzID"
-specify an authorization ID to be mapped to a
-.B DN
-as by means of
-.B authz-regexp
-or
-.B authz-rewrite
-rules (see
-.BR slapd.conf (5)
-for details); mutually exclusive with \fB\-o\fP \fIauthzDN=DN\fP.
-.TP
.BI \-o " option[=value]"
Specify an
.BR option
with a(n optional)
.BR value .
-Possible options/values are:
+Possible generic options/values are:
.LP
.nf
- sockurl
+ syslog=<subsystems> (see `\-s' in slapd(8))
+ syslog-level=<level> (see `\-S' in slapd(8))
+ syslog-user=<user> (see `\-l' in slapd(8))
+
+.fi
+.RS
+Possible options/values specific to
+.B slapacl
+are:
+.RE
+.nf
+
+ authzDN
domain
peername
+ sasl_ssf
sockname
+ sockurl
ssf
- transport_ssf
tls_ssf
- sasl_ssf
- authzDN
+ transport_ssf
+
.fi
-.TP
-.BI \-b " DN"
-specify the
-.B DN
-which access is requested to; the corresponding entry is fetched
-from the database, and thus it must exist.
-The DN is also used to determine what rules apply; thus, it must be
-in the naming context of a configured database. See also
-.BR \-u .
+.RS
+See the related fields in
+.BR slapd.access (5)
+for details.
+.RE
.TP
.BI \-u
do not fetch the entry from the database.
in the naming context of a configured database.
See also
.BR \-b .
+.TP
+.BI \-U " authcID"
+specify an ID to be mapped to a
+.B DN
+as by means of
+.B authz-regexp
+or
+.B authz-rewrite
+rules (see
+.BR slapd.conf (5)
+for details); mutually exclusive with
+.BR \-D .
+.TP
+.B \-v
+enable verbose mode.
+.TP
+.BI \-X " authzID"
+specify an authorization ID to be mapped to a
+.B DN
+as by means of
+.B authz-regexp
+or
+.B authz-rewrite
+rules (see
+.BR slapd.conf (5)
+for details); mutually exclusive with \fB\-o\fP \fIauthzDN=DN\fP.
.SH EXAMPLES
The command
.LP
slapadd \- Add entries to a SLAPD database
.SH SYNOPSIS
.B SBINDIR/slapadd
-.B [\-v]
+.B [\-b suffix]
.B [\-c]
.B [\-g]
-.B [\-u]
-.B [\-q]
-.B [\-w]
.B [\-d level]
-.B [\-b suffix]
-.B [\-n dbnum]
.B [\-f slapd.conf]
.B [\-F confdir]
.B [\-l ldif-file]
+.B [\-n dbnum]
+.B [\-o name[=value]
+.B [\-q]
+.B [\-u]
+.B [\-v]
+.B [\-w]
.SH DESCRIPTION
.LP
.B Slapadd
attributes (such as createTimeStamp and modifiersName).
.SH OPTIONS
.TP
-.B \-v
-enable verbose mode.
-.TP
-.B \-c
-enable continue (ignore errors) mode.
-.TP
-.B \-g
-disable subordinate gluing. Only the specified database will be
-processed, and not its glued subordinates (if any).
-.TP
-.B -s
-disable schema checking. This option is intended to be used when loading
-databases containing special objects, such as fractional objects on a
-partial replica. Loading normal objects which do not conform to
-schema may result in unexpected and ill behavior.
-.TP
-.B \-u
-enable dry-run (don't write to backend) mode.
-.TP
-.B \-q
-enable quick (fewer integrity checks) mode. Does fewer consistency checks
-on the input data, and no consistency checks when writing the database.
-Improves the load time but if any errors or interruptions occur the resulting
-database will be unusable.
-.TP
-.BI \-w
-write syncrepl context information.
-After all entries are added, the contextCSN
-will be updated with the greatest CSN in the database.
-.TP
-.BI \-d " level"
-enable debugging messages as defined by the specified
-.IR level .
-.TP
.BI \-b " suffix"
Use the specified \fIsuffix\fR to determine which database to
add entries to. The \-b cannot be used in conjunction
.B \-n
option.
.TP
-.BI \-n " dbnum"
-Add entries to the \fIdbnum\fR\-th database listed in the
-configuration file. The
-.B \-n
-cannot be used in conjunction with the
-.B \-b
-option.
+.B \-c
+enable continue (ignore errors) mode.
+.TP
+.BI \-d " level"
+enable debugging messages as defined by the specified
+.IR level .
.TP
.BI \-f " slapd.conf"
specify an alternative
default config file is ignored. If dryrun mode is also specified,
no conversion will occur.
.TP
+.B \-g
+disable subordinate gluing. Only the specified database will be
+processed, and not its glued subordinates (if any).
+.TP
.BI \-l " ldif-file"
Read LDIF from the specified file instead of standard input.
+.TP
+.BI \-n " dbnum"
+Add entries to the \fIdbnum\fR\-th database listed in the
+configuration file. The
+.B \-n
+cannot be used in conjunction with the
+.B \-b
+option.
+.TP
+.BI \-o " option[=value]"
+Specify an
+.BR option
+with a(n optional)
+.BR value .
+Possible generic options/values are:
+.LP
+.nf
+ syslog=<subsystems> (see `\-s' in slapd(8))
+ syslog-level=<level> (see `\-S' in slapd(8))
+ syslog-user=<user> (see `\-l' in slapd(8))
+
+.fi
+.TP
+.B \-q
+enable quick (fewer integrity checks) mode. Does fewer consistency checks
+on the input data, and no consistency checks when writing the database.
+Improves the load time but if any errors or interruptions occur the resulting
+database will be unusable.
+.TP
+.B -s
+disable schema checking. This option is intended to be used when loading
+databases containing special objects, such as fractional objects on a
+partial replica. Loading normal objects which do not conform to
+schema may result in unexpected and ill behavior.
+.TP
+.B \-u
+enable dry-run (don't write to backend) mode.
+.TP
+.B \-v
+enable verbose mode.
+.TP
+.BI \-w
+write syncrepl context information.
+After all entries are added, the contextCSN
+will be updated with the greatest CSN in the database.
.SH LIMITATIONS
Your
.BR slapd (8)
slapauth \- Check a list of string-represented IDs for authc/authz.
.SH SYNOPSIS
.B SBINDIR/slapauth
-.B [\-v]
.B [\-d level]
.B [\-f slapd.conf]
.B [\-F confdir]
.B [\-M mech]
+.B [\-o name[=value]
.B [\-R realm]
.B [\-U authcID]
+.B [\-v]
.B [\-X authzID]
.B ID [...]
.LP
.LP
.SH OPTIONS
.TP
-.B \-v
-enable verbose mode.
-.TP
.BI \-d " level"
enable debugging messages as defined by the specified
.IR level .
.BI \-M " mech"
specify a mechanism.
.TP
+.BI \-o " option[=value]"
+Specify an
+.BR option
+with a(n optional)
+.BR value .
+Possible generic options/values are:
+.LP
+.nf
+ syslog=<subsystems> (see `\-s' in slapd(8))
+ syslog-level=<level> (see `\-S' in slapd(8))
+ syslog-user=<user> (see `\-l' in slapd(8))
+
+.fi
+.TP
.BI \-R " realm"
specify a realm.
.TP
and
.I authzID
are given via command line switch, the ID list cannot be present.
+.TP
+.B \-v
+enable verbose mode.
.SH EXAMPLES
The command
.LP
slapcat \- SLAPD database to LDIF utility
.SH SYNOPSIS
.B SBINDIR/slapcat
-.B [\-v]
+.B [\-a filter]
+.B [\-b suffix]
.B [\-c]
-.B [\-g]
.B [\-d level]
-.B [\-b suffix]
-.B [\-n dbnum]
-.B [\-a filter]
-.B [\-s subtree-dn]
.B [\-f slapd.conf]
.B [\-F confdir]
+.B [\-g]
.B [\-l ldif-file]
+.B [\-n dbnum]
+.B [\-o name[=value]
+.B [\-s subtree-dn]
+.B [\-v]
.B
.LP
.SH DESCRIPTION
operational attributes.
.SH OPTIONS
.TP
-.B \-v
-Enable verbose mode.
-.TP
-.B \-c
-Enable continue (ignore errors) mode.
-.TP
-.B \-g
-disable subordinate gluing. Only the specified database will be
-processed, and not its glued subordinates (if any).
-.TP
-.BI \-d " level"
-Enable debugging messages as defined by the specified
-.IR level .
-.TP
-.BI \-b " suffix"
-Use the specified \fIsuffix\fR to determine which database to
-generate output for. The \-b cannot be used in conjunction
-with the
-.B \-n
-option.
-.TP
-.BI \-n " dbnum"
-Generate output for the \fIdbnum\fR\-th database listed in the
-configuration file. The
-.B \-n
-cannot be used in conjunction with the
-.B \-b
-option.
-.TP
.BI \-a " filter"
Only dump entries matching the asserted filter.
For example
will dump all but the "ou=People,dc=example,dc=com" subtree
of the "dc=example,dc=com" database.
.TP
-.BI \-s " subtree-dn"
-Only dump entries in the subtree specified by this DN.
-Implies `-b subtree-dn' if no
-.B \-b
-or
+.BI \-b " suffix"
+Use the specified \fIsuffix\fR to determine which database to
+generate output for. The \-b cannot be used in conjunction
+with the
.B \-n
-option is given.
+option.
+.TP
+.B \-c
+Enable continue (ignore errors) mode.
+.TP
+.BI \-d " level"
+Enable debugging messages as defined by the specified
+.IR level .
.TP
.BI \-f " slapd.conf"
Specify an alternative
config file. If a valid config directory exists then the
default config file is ignored.
.TP
+.B \-g
+disable subordinate gluing. Only the specified database will be
+processed, and not its glued subordinates (if any).
+.TP
.BI \-l " ldif-file"
Write LDIF to specified file instead of standard output.
+.TP
+.BI \-n " dbnum"
+Generate output for the \fIdbnum\fR\-th database listed in the
+configuration file. The
+.B \-n
+cannot be used in conjunction with the
+.B \-b
+option.
+.TP
+.BI \-o " option[=value]"
+Specify an
+.BR option
+with a(n optional)
+.BR value .
+Possible generic options/values are:
+.LP
+.nf
+ syslog=<subsystems> (see `\-s' in slapd(8))
+ syslog-level=<level> (see `\-S' in slapd(8))
+ syslog-user=<user> (see `\-l' in slapd(8))
+
+.fi
+.TP
+.BI \-s " subtree-dn"
+Only dump entries in the subtree specified by this DN.
+Implies `-b subtree-dn' if no
+.B \-b
+or
+.B \-n
+option is given.
+.TP
+.B \-v
+Enable verbose mode.
.SH LIMITATIONS
In general, your
.BR slapd (8)
slapdn \- Check a list of string-represented DNs based on schema syntax.
.SH SYNOPSIS
.B SBINDIR/slapdn
-.B [\-v]
.B [\-d level]
.B [\-f slapd.conf]
.B [\-F confdir]
.B [\-N | \-P]
+.B [\-o name[=value]
+.B [\-v]
.B DN [...]
.LP
.SH DESCRIPTION
.LP
.SH OPTIONS
.TP
-.B \-v
-enable verbose mode.
-.TP
.BI \-d " level"
enable debugging messages as defined by the specified
.IR level .
in a normalization tool; incompatible with
.BR \-P .
.TP
+.BI \-o " option[=value]"
+Specify an
+.BR option
+with a(n optional)
+.BR value .
+Possible generic options/values are:
+.LP
+.nf
+ syslog=<subsystems> (see `\-s' in slapd(8))
+ syslog-level=<level> (see `\-S' in slapd(8))
+ syslog-user=<user> (see `\-l' in slapd(8))
+
+.fi
+.TP
.BI \-P
only output a prettified form of the DN, suitable to be used
in a check and beautification tool; incompatible with
.BR \-N .
+.TP
+.B \-v
+enable verbose mode.
.SH EXAMPLES
To check a
.B DN
slapindex \- SLAPD index to LDIF utility
.SH SYNOPSIS
.B SBINDIR/slapindex
-.B [\-v]
+.B [\-b suffix]
.B [\-c]
-.B [\-g]
-.B [\-q]
.B [\-d level]
-.B [\-b suffix]
-.B [\-n dbnum]
.B [\-f slapd.conf]
.B [\-F confdir]
+.B [\-g]
+.B [\-n dbnum]
+.B [\-o name[=value]
+.B [\-q]
+.B [\-v]
.B
.LP
.SH DESCRIPTION
of this one are also re-indexed, unless \fB-g\fP is specified.
.SH OPTIONS
.TP
-.B \-v
-enable verbose mode.
-.TP
-.B \-c
-enable continue (ignore errors) mode.
-.TP
-.B \-g
-disable subordinate gluing. Only the specified database will be
-processed, and not its glued subordinates (if any).
-.TP
-.B \-q
-enable quick (fewer integrity checks) mode. Performs no consistency checks
-when writing the database. Improves indexing time,
-.B however
-the database will most likely be unusable if any errors or
-interruptions occur.
-.TP
-.BI \-d " level"
-enable debugging messages as defined by the specified
-.IR level .
-.TP
.BI \-b " suffix"
Use the specified \fIsuffix\fR to determine which database to
generate output for. The \-b cannot be used in conjunction
.B \-n
option.
.TP
-.BI \-n " dbnum"
-Generate output for the \fIdbnum\fR\-th database listed in the
-configuration file. The
-.B \-n
-cannot be used in conjunction with the
-.B \-b
-option.
+.B \-c
+enable continue (ignore errors) mode.
+.TP
+.BI \-d " level"
+enable debugging messages as defined by the specified
+.IR level .
.TP
.BI \-f " slapd.conf"
specify an alternative
default config directory will be made before trying to use the default
config file. If a valid config directory exists then the
default config file is ignored.
+.TP
+.B \-g
+disable subordinate gluing. Only the specified database will be
+processed, and not its glued subordinates (if any).
+.TP
+.BI \-n " dbnum"
+Generate output for the \fIdbnum\fR\-th database listed in the
+configuration file. The
+.B \-n
+cannot be used in conjunction with the
+.B \-b
+option.
+.TP
+.BI \-o " option[=value]"
+Specify an
+.BR option
+with a(n optional)
+.BR value .
+Possible generic options/values are:
+.LP
+.nf
+ syslog=<subsystems> (see `\-s' in slapd(8))
+ syslog-level=<level> (see `\-S' in slapd(8))
+ syslog-user=<user> (see `\-l' in slapd(8))
+
+.fi
+.TP
+.B \-q
+enable quick (fewer integrity checks) mode. Performs no consistency checks
+when writing the database. Improves indexing time,
+.B however
+the database will most likely be unusable if any errors or
+interruptions occur.
+.TP
+.B \-v
+enable verbose mode.
.SH LIMITATIONS
Your
.BR slapd (8)
.B [\-d level]
.B [\-f slapd.conf]
.B [\-F confdir]
+.B [\-o name[=value]
.B [\-u]
.B [\-v]
.LP
default config file is ignored. If dryrun mode is also specified,
no conversion will occur.
.TP
+.BI \-o " option[=value]"
+Specify an
+.BR option
+with a(n optional)
+.BR value .
+Possible generic options/values are:
+.LP
+.nf
+ syslog=<subsystems> (see `\-s' in slapd(8))
+ syslog-level=<level> (see `\-S' in slapd(8))
+ syslog-user=<user> (see `\-l' in slapd(8))
+
+.fi
+.TP
.B \-u
enable dryrun mode (i.e. don't fail if databases cannot be opened,
but config is fine).
void *slap_tls_ctx;
LDAP *slap_tls_ld;
-#ifdef LOG_LOCAL4
-#define DEFAULT_SYSLOG_USER LOG_LOCAL4
-#endif /* LOG_LOCAL4 */
-
static int
slapd_opt_slp( const char *val, void *arg )
{
#if defined(LDAP_DEBUG) && defined(LDAP_SYSLOG)
#ifdef LOG_LOCAL4
-static int
+int
parse_syslog_user( const char *arg, int *syslogUser )
{
static slap_verbmasks syslogUsers[] = {
#endif /* LOG_DAEMON */
{ BER_BVNULL, 0 }
};
- int i = verb_to_mask( optarg, syslogUsers );
+ int i = verb_to_mask( arg, syslogUsers );
if ( BER_BVISNULL( &syslogUsers[ i ].word ) ) {
Debug( LDAP_DEBUG_ANY,
"unrecognized syslog user \"%s\".\n",
- optarg, 0, 0 );
+ arg, 0, 0 );
return 1;
}
}
#endif /* LOG_LOCAL4 */
-static int
+int
parse_syslog_level( const char *arg, int *levelp )
{
static slap_verbmasks str2syslog_level[] = {
char *sandbox = NULL;
#endif
#ifdef LOG_LOCAL4
- int syslogUser = DEFAULT_SYSLOG_USER;
+ int syslogUser = SLAP_DEFAULT_SYSLOG_USER;
#endif
int g_argc = argc;
LDAP_SLAPD_F (int)
parse_debug_level LDAP_P(( const char *arg, int *levelp, char ***unknowns ));
LDAP_SLAPD_F (int)
+parse_syslog_level LDAP_P(( const char *arg, int *levelp ));
+LDAP_SLAPD_F (int)
+parse_syslog_user LDAP_P(( const char *arg, int *syslogUser ));
+LDAP_SLAPD_F (int)
parse_debug_unknowns LDAP_P(( char **unknowns, int *levelp ));
/*
SEND_LDAP_INTERMEDIATE *c_send_ldap_intermediate;
} Connection;
-#if defined(LDAP_SYSLOG) && defined(LDAP_DEBUG)
+#ifdef LDAP_DEBUG
+#ifdef LDAP_SYSLOG
+#ifdef LOG_LOCAL4
+#define SLAP_DEFAULT_SYSLOG_USER LOG_LOCAL4
+#endif /* LOG_LOCAL4 */
+
#define Statslog( level, fmt, connid, opid, arg1, arg2, arg3 ) \
Log5( (level), ldap_syslog_level, (fmt), (connid), (opid), (arg1), (arg2), (arg3) )
#define StatslogTest( level ) ((ldap_debug | ldap_syslog) & (level))
-#elif defined(LDAP_DEBUG)
+#else /* !LDAP_SYSLOG */
#define Statslog( level, fmt, connid, opid, arg1, arg2, arg3 ) \
do { \
if ( ldap_debug & (level) ) \
fprintf( stderr, (fmt), (connid), (opid), (arg1), (arg2), (arg3) );\
} while (0)
#define StatslogTest( level ) (ldap_debug & (level))
-#else
+#endif /* !LDAP_SYSLOG */
+#else /* !LDAP_DEBUG */
#define Statslog( level, fmt, connid, opid, arg1, arg2, arg3 ) ((void) 0)
#define StatslogTest( level ) (0)
-#endif
+#endif /* !LDAP_DEBUG */
/*
* listener; need to access it from monitor backend
static LDIFFP dummy;
+#ifdef LDAP_SYSLOG
+int start_syslog;
+static char **syslog_unknowns;
+#ifdef LOG_LOCAL4
+static int syslogUser = SLAP_DEFAULT_SYSLOG_USER;
+#endif /* LOG_LOCAL4 */
+#endif /* LDAP_SYSLOG */
+
static void
usage( int tool, const char *progname )
{
char *options = NULL;
fprintf( stderr,
- "usage: %s [-v] [-d debuglevel] [-f configfile] [-F configdir]",
+ "usage: %s [-v] [-d debuglevel] [-f configfile] [-F configdir] [-o <name>[=<value>]]",
progname );
switch( tool ) {
case SLAPACL:
options = "\n\t[-U authcID | -D authcDN] [-X authzID | -o authzDN=<DN>]"
- "\n\t-b DN -o <var>[=<val>] [-u] [attr[/access][:value]] [...]\n";
+ "\n\t-b DN [-u] [attr[/access][:value]] [...]\n";
break;
case SLAPADD:
}
static int
-parse_slapacl( void )
+parse_slapopt( void )
{
- size_t len;
+ size_t len = 0;
char *p;
p = strchr( optarg, '=' );
- if ( p == NULL ) {
- return -1;
+ if ( p != NULL ) {
+ len = p - optarg;
+ p++;
}
- len = p - optarg;
- p++;
-
if ( strncasecmp( optarg, "sockurl", len ) == 0 ) {
if ( !BER_BVISNULL( &listener_url ) ) {
ber_memfree( listener_url.bv_val );
} else if ( strncasecmp( optarg, "authzDN", len ) == 0 ) {
ber_str2bv( p, 0, 1, &authzDN );
+#ifdef LDAP_SYSLOG
+ } else if ( strncasecmp( optarg, "syslog", len ) == 0 ) {
+ if ( parse_debug_level( p, &ldap_syslog, &syslog_unknowns ) ) {
+ return -1;
+ }
+ start_syslog = 1;
+
+ } else if ( strncasecmp( optarg, "syslog-level", len ) == 0 ) {
+ if ( parse_syslog_level( p, &ldap_syslog_level ) ) {
+ return -1;
+ }
+ start_syslog = 1;
+
+#ifdef LOG_LOCAL4
+ } else if ( strncasecmp( optarg, "syslog-user", len ) == 0 ) {
+ if ( parse_syslog_user( p, &syslogUser ) ) {
+ return -1;
+ }
+ start_syslog = 1;
+#endif /* LOG_LOCAL4 */
+#endif /* LDAP_SYSLOG */
+
} else {
return -1;
}
* messages show up; use -d 0 to reset */
slap_debug = LDAP_DEBUG_NONE;
#endif
+ ldap_syslog = 0;
#ifdef CSRIMALLOC
leakfilename = malloc( strlen( progname ) + STRLENOF( ".leak" ) + 1 );
switch( tool ) {
case SLAPADD:
- options = "b:cd:f:F:gl:n:qstuvw";
+ options = "b:cd:f:F:gl:n:o:qstuvw";
break;
case SLAPCAT:
- options = "a:b:cd:f:F:gl:n:s:v";
+ options = "a:b:cd:f:F:gl:n:o:s:v";
mode |= SLAP_TOOL_READMAIN | SLAP_TOOL_READONLY;
break;
case SLAPDN:
- options = "d:f:F:NPv";
+ options = "d:f:F:No:Pv";
mode |= SLAP_TOOL_READMAIN | SLAP_TOOL_READONLY;
break;
case SLAPTEST:
- options = "d:f:F:uv";
+ options = "d:f:F:o:uv";
mode |= SLAP_TOOL_READMAIN | SLAP_TOOL_READONLY;
break;
case SLAPAUTH:
- options = "d:f:F:M:R:U:vX:";
+ options = "d:f:F:M:o:R:U:vX:";
mode |= SLAP_TOOL_READMAIN | SLAP_TOOL_READONLY;
break;
case SLAPINDEX:
- options = "b:cd:f:F:gn:qv";
+ options = "b:cd:f:F:gn:o:qv";
mode |= SLAP_TOOL_READMAIN;
break;
break;
case 'o':
- if ( parse_slapacl() ) {
+ if ( parse_slapopt() ) {
usage( tool, progname );
}
break;
}
}
+#ifdef LDAP_SYSLOG
+ if ( start_syslog ) {
+ char *logName;
+#ifdef HAVE_EBCDIC
+ logName = ch_strdup( progname );
+ __atoe( logName );
+#else
+ logName = (char *)progname;
+#endif
+
+#ifdef LOG_LOCAL4
+ openlog( logName, OPENLOG_OPTIONS, syslogUser );
+#elif LOG_DEBUG
+ openlog( logName, OPENLOG_OPTIONS );
+#endif
+#ifdef HAVE_EBCDIC
+ free( logName );
+#endif
+ }
+#endif /* LDAP_SYSLOG */
+
switch ( tool ) {
case SLAPADD:
case SLAPCAT:
break;
}
- ldap_syslog = 0;
-
if ( ldiffile == NULL ) {
dummy.fp = tool == SLAPCAT ? stdout : stdin;
ldiffp = &dummy;
exit( EXIT_FAILURE );
}
+ if ( syslog_unknowns ) {
+ rc = parse_debug_unknowns( syslog_unknowns, &ldap_syslog );
+ ldap_charray_free( syslog_unknowns );
+ syslog_unknowns = NULL;
+ if ( rc )
+ exit( EXIT_FAILURE );
+ }
+
at_oc_cache = 1;
switch ( tool ) {
projects / openldap / commitdiff