JTAG Layer:
New driver for "Bus Pirate"
Rename various commands so they're not JTAG-specific
- There are migration procedures for these, but you should
+ There are migration procedures for most of these, but you should
convert your scripts to the new names, since those procedures
will not be around forever.
+ jtag jinterface ... is now adapter_name
jtag_khz ... is now adapter_khz
jtag_nsrst_delay ... is now adapter_nsrst_delay
jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
@end deffn
@deffn Command {interface_list}
-List the interface drivers that have been built into
+List the debug adapter drivers that have been built into
the running copy of OpenOCD.
@end deffn
-@deffn Command {jtag interface}
-Returns the name of the interface driver being used.
+@deffn Command {adapter_name}
+Returns the name of the debug adapter driver being used.
@end deffn
@section Interface Drivers
libjtag_la_SOURCES = \
+ adapter.c \
core.c \
interface.c \
interfaces.c \
--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * Copyright (C) 2007-2010 Øyvind Harboe *
+ * oyvind.harboe@zylin.com *
+ * *
+ * Copyright (C) 2009 SoftPLC Corporation *
+ * http://softplc.com *
+ * dick@softplc.com *
+ * *
+ * Copyright (C) 2009 Zachary T Welch *
+ * zw@superlucidity.net *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "jtag.h"
+#include "minidriver.h"
+#include "interface.h"
+#include "interfaces.h"
+
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+
+/**
+ * @file
+ * Holds support for configuring debug adapters from TCl scripts.
+ */
+
+extern struct jtag_interface *jtag_interface;
+
+
+
+static int
+jim_adapter_name(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
+{
+ Jim_GetOptInfo goi;
+ Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
+
+ /* return the name of the interface */
+ /* TCL code might need to know the exact type... */
+ /* FUTURE: we allow this as a means to "set" the interface. */
+ if (goi.argc != 0) {
+ Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
+ return JIM_ERR;
+ }
+ const char *name = jtag_interface ? jtag_interface->name : NULL;
+ Jim_SetResultString(goi.interp, name ? : "undefined", -1);
+ return JIM_OK;
+}
+
+
+static int default_khz(int khz, int *jtag_speed)
+{
+ LOG_ERROR("Translation from khz to jtag_speed not implemented");
+ return ERROR_FAIL;
+}
+
+static int default_speed_div(int speed, int *khz)
+{
+ LOG_ERROR("Translation from jtag_speed to khz not implemented");
+ return ERROR_FAIL;
+}
+
+static int default_power_dropout(int *dropout)
+{
+ *dropout = 0; /* by default we can't detect power dropout */
+ return ERROR_OK;
+}
+
+static int default_srst_asserted(int *srst_asserted)
+{
+ *srst_asserted = 0; /* by default we can't detect srst asserted */
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_interface_list_command)
+{
+ if (strcmp(CMD_NAME, "interface_list") == 0 && CMD_ARGC > 0)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ command_print(CMD_CTX, "The following debug interfaces are available:");
+ for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
+ {
+ const char *name = jtag_interfaces[i]->name;
+ command_print(CMD_CTX, "%u: %s", i + 1, name);
+ }
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_interface_command)
+{
+ /* check whether the interface is already configured */
+ if (jtag_interface)
+ {
+ LOG_WARNING("Interface already configured, ignoring");
+ return ERROR_OK;
+ }
+
+ /* interface name is a mandatory argument */
+ if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
+ {
+ if (strcmp(CMD_ARGV[0], jtag_interfaces[i]->name) != 0)
+ continue;
+
+ if (NULL != jtag_interfaces[i]->commands)
+ {
+ int retval = register_commands(CMD_CTX, NULL,
+ jtag_interfaces[i]->commands);
+ if (ERROR_OK != retval)
+ return retval;
+ }
+
+ jtag_interface = jtag_interfaces[i];
+
+ if (jtag_interface->khz == NULL)
+ jtag_interface->khz = default_khz;
+ if (jtag_interface->speed_div == NULL)
+ jtag_interface->speed_div = default_speed_div;
+ if (jtag_interface->power_dropout == NULL)
+ jtag_interface->power_dropout = default_power_dropout;
+ if (jtag_interface->srst_asserted == NULL)
+ jtag_interface->srst_asserted = default_srst_asserted;
+
+ return ERROR_OK;
+ }
+
+ /* no valid interface was found (i.e. the configuration option,
+ * didn't match one of the compiled-in interfaces
+ */
+ LOG_ERROR("The specified debug interface was not found (%s)", CMD_ARGV[0]);
+ CALL_COMMAND_HANDLER(handle_interface_list_command);
+ return ERROR_JTAG_INVALID_INTERFACE;
+}
+
+COMMAND_HANDLER(handle_reset_config_command)
+{
+ int new_cfg = 0;
+ int mask = 0;
+
+ /* Original versions cared about the order of these tokens:
+ * reset_config signals [combination [trst_type [srst_type]]]
+ * They also clobbered the previous configuration even on error.
+ *
+ * Here we don't care about the order, and only change values
+ * which have been explicitly specified.
+ */
+ for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
+ int tmp = 0;
+ int m;
+
+ /* gating */
+ m = RESET_SRST_NO_GATING;
+ if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
+ /* default: don't use JTAG while SRST asserted */;
+ else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
+ tmp = RESET_SRST_NO_GATING;
+ else
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "gating", *CMD_ARGV);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+ if (m)
+ goto next;
+
+ /* signals */
+ m = RESET_HAS_TRST | RESET_HAS_SRST;
+ if (strcmp(*CMD_ARGV, "none") == 0)
+ tmp = RESET_NONE;
+ else if (strcmp(*CMD_ARGV, "trst_only") == 0)
+ tmp = RESET_HAS_TRST;
+ else if (strcmp(*CMD_ARGV, "srst_only") == 0)
+ tmp = RESET_HAS_SRST;
+ else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
+ tmp = RESET_HAS_TRST | RESET_HAS_SRST;
+ else
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "signal", *CMD_ARGV);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+ if (m)
+ goto next;
+
+ /* combination (options for broken wiring) */
+ m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
+ if (strcmp(*CMD_ARGV, "separate") == 0)
+ /* separate reset lines - default */;
+ else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
+ tmp |= RESET_SRST_PULLS_TRST;
+ else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
+ tmp |= RESET_TRST_PULLS_SRST;
+ else if (strcmp(*CMD_ARGV, "combined") == 0)
+ tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
+ else
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "combination", *CMD_ARGV);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+ if (m)
+ goto next;
+
+ /* trst_type (NOP without HAS_TRST) */
+ m = RESET_TRST_OPEN_DRAIN;
+ if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
+ tmp |= RESET_TRST_OPEN_DRAIN;
+ else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
+ /* push/pull from adapter - default */;
+ else
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "trst_type", *CMD_ARGV);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+ if (m)
+ goto next;
+
+ /* srst_type (NOP without HAS_SRST) */
+ m |= RESET_SRST_PUSH_PULL;
+ if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
+ tmp |= RESET_SRST_PUSH_PULL;
+ else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
+ /* open drain from adapter - default */;
+ else
+ m = 0;
+ if (mask & m) {
+ LOG_ERROR("extra reset_config %s spec (%s)",
+ "srst_type", *CMD_ARGV);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+ if (m)
+ goto next;
+
+ /* caller provided nonsense; fail */
+ LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
+ return ERROR_INVALID_ARGUMENTS;
+
+next:
+ /* Remember the bits which were specified (mask)
+ * and their new values (new_cfg).
+ */
+ mask |= m;
+ new_cfg |= tmp;
+ }
+
+ /* clear previous values of those bits, save new values */
+ if (mask) {
+ int old_cfg = jtag_get_reset_config();
+
+ old_cfg &= ~mask;
+ new_cfg |= old_cfg;
+ jtag_set_reset_config(new_cfg);
+ } else
+ new_cfg = jtag_get_reset_config();
+
+
+ /*
+ * Display the (now-)current reset mode
+ */
+ char *modes[5];
+
+ /* minimal JTAG has neither SRST nor TRST (so that's the default) */
+ switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
+ case RESET_HAS_SRST:
+ modes[0] = "srst_only";
+ break;
+ case RESET_HAS_TRST:
+ modes[0] = "trst_only";
+ break;
+ case RESET_TRST_AND_SRST:
+ modes[0] = "trst_and_srst";
+ break;
+ default:
+ modes[0] = "none";
+ break;
+ }
+
+ /* normally SRST and TRST are decoupled; but bugs happen ... */
+ switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
+ case RESET_SRST_PULLS_TRST:
+ modes[1] = "srst_pulls_trst";
+ break;
+ case RESET_TRST_PULLS_SRST:
+ modes[1] = "trst_pulls_srst";
+ break;
+ case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
+ modes[1] = "combined";
+ break;
+ default:
+ modes[1] = "separate";
+ break;
+ }
+
+ /* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
+ if (new_cfg & RESET_HAS_TRST) {
+ if (new_cfg & RESET_TRST_OPEN_DRAIN)
+ modes[3] = " trst_open_drain";
+ else
+ modes[3] = " trst_push_pull";
+ } else
+ modes[3] = "";
+
+ /* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
+ if (new_cfg & RESET_HAS_SRST) {
+ if (new_cfg & RESET_SRST_NO_GATING)
+ modes[2] = " srst_nogate";
+ else
+ modes[2] = " srst_gates_jtag";
+
+ if (new_cfg & RESET_SRST_PUSH_PULL)
+ modes[4] = " srst_push_pull";
+ else
+ modes[4] = " srst_open_drain";
+ } else {
+ modes[2] = "";
+ modes[4] = "";
+ }
+
+ command_print(CMD_CTX, "%s %s%s%s%s",
+ modes[0], modes[1],
+ modes[2], modes[3], modes[4]);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_adapter_nsrst_delay_command)
+{
+ if (CMD_ARGC > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ if (CMD_ARGC == 1)
+ {
+ unsigned delay;
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
+
+ jtag_set_nsrst_delay(delay);
+ }
+ command_print(CMD_CTX, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay());
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_adapter_khz_command)
+{
+ if (CMD_ARGC > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ int retval = ERROR_OK;
+ if (CMD_ARGC == 1)
+ {
+ unsigned khz = 0;
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
+
+ retval = jtag_config_khz(khz);
+ if (ERROR_OK != retval)
+ return retval;
+ }
+
+ int cur_speed = jtag_get_speed_khz();
+ retval = jtag_get_speed_readable(&cur_speed);
+ if (ERROR_OK != retval)
+ return retval;
+
+ if (cur_speed)
+ command_print(CMD_CTX, "%d kHz", cur_speed);
+ else
+ command_print(CMD_CTX, "RCLK - adaptive");
+
+ return retval;
+}
+
+static const struct command_registration interface_command_handlers[] = {
+ {
+ .name = "adapter_khz",
+ .handler = handle_adapter_khz_command,
+ .mode = COMMAND_ANY,
+ .help = "With an argument, change to the specified maximum "
+ "jtag speed. For JTAG, 0 KHz signifies adaptive "
+ " clocking. "
+ "With or without argument, display current setting.",
+ .usage = "[khz]",
+ },
+ {
+ .name = "adapter_name",
+ .mode = COMMAND_ANY,
+ .jim_handler = jim_adapter_name,
+ .help = "Returns the name of the currently "
+ "selected adapter (driver)",
+ },
+ {
+ .name = "adapter_nsrst_delay",
+ .handler = handle_adapter_nsrst_delay_command,
+ .mode = COMMAND_ANY,
+ .help = "delay after deasserting SRST in ms",
+ .usage = "[milliseconds]",
+ },
+ {
+ .name = "interface",
+ .handler = handle_interface_command,
+ .mode = COMMAND_CONFIG,
+ .help = "Select a debug adapter interface (driver)",
+ .usage = "driver_name",
+ },
+ {
+ .name = "interface_list",
+ .handler = handle_interface_list_command,
+ .mode = COMMAND_ANY,
+ .help = "List all built-in debug adapter interfaces (drivers)",
+ },
+ {
+ .name = "reset_config",
+ .handler = handle_reset_config_command,
+ .mode = COMMAND_ANY,
+ .help = "configure adapter reset behavior",
+ .usage = "[none|trst_only|srst_only|trst_and_srst] "
+ "[srst_pulls_trst|trst_pulls_srst|combined|separate] "
+ "[srst_gates_jtag|srst_nogate] "
+ "[trst_push_pull|trst_open_drain] "
+ "[srst_push_pull|srst_open_drain]",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+/**
+ * Register the commands which deal with arbitrary debug adapter drivers.
+ *
+ * @todo Remove internal assumptions that all debug adapters use JTAG for
+ * transport. Various types and data structures are not named generically.
+ */
+int interface_register_commands(struct command_context *ctx)
+{
+ return register_commands(ctx, NULL, interface_command_handlers);
+}
# BEGIN MIGRATION AIDS ... these adapter operations originally had
# JTAG-specific names despite the fact that the operations were not
-# specific to JTAG.
+# specific to JTAG, or otherewise had troublesome/misleading names.
#
# FIXME phase these aids out after about April 2011
#
#include <strings.h>
#endif
+/**
+ * @file
+ * Holds support for accessing JTAG-specific mechanisms from TCl scripts.
+ */
+
static const Jim_Nvp nvp_jtag_tap_event[] = {
{ .value = JTAG_TRST_ASSERTED, .name = "post-reset" },
{ .value = JTAG_TAP_EVENT_SETUP, .name = "setup" },
}
}
-static int
-jim_jtag_interface(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
-{
- Jim_GetOptInfo goi;
- Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
-
- /* return the name of the interface */
- /* TCL code might need to know the exact type... */
- /* FUTURE: we allow this as a means to "set" the interface. */
- if (goi.argc != 0) {
- Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
- return JIM_ERR;
- }
- const char *name = jtag_interface ? jtag_interface->name : NULL;
- Jim_SetResultString(goi.interp, name ? : "undefined", -1);
- return JIM_OK;
-}
-
static int jim_jtag_arp_init(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
Jim_GetOptInfo goi;
.handler = handle_jtag_init_command,
.help = "initialize jtag scan chain",
},
- {
- .name = "interface",
- .mode = COMMAND_ANY,
- .jim_handler = jim_jtag_interface,
- .help = "Returns the name of the currently selected interface.",
- },
{
.name = "arp_init",
.mode = COMMAND_ANY,
}
-static int default_khz(int khz, int *jtag_speed)
-{
- LOG_ERROR("Translation from khz to jtag_speed not implemented");
- return ERROR_FAIL;
-}
-
-static int default_speed_div(int speed, int *khz)
-{
- LOG_ERROR("Translation from jtag_speed to khz not implemented");
- return ERROR_FAIL;
-}
-
-static int default_power_dropout(int *dropout)
-{
- *dropout = 0; /* by default we can't detect power dropout */
- return ERROR_OK;
-}
-
-static int default_srst_asserted(int *srst_asserted)
-{
- *srst_asserted = 0; /* by default we can't detect srst asserted */
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(handle_interface_list_command)
-{
- if (strcmp(CMD_NAME, "interface_list") == 0 && CMD_ARGC > 0)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- command_print(CMD_CTX, "The following debug interfaces are available:");
- for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
- {
- const char *name = jtag_interfaces[i]->name;
- command_print(CMD_CTX, "%u: %s", i + 1, name);
- }
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(handle_interface_command)
-{
- /* check whether the interface is already configured */
- if (jtag_interface)
- {
- LOG_WARNING("Interface already configured, ignoring");
- return ERROR_OK;
- }
-
- /* interface name is a mandatory argument */
- if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
- {
- if (strcmp(CMD_ARGV[0], jtag_interfaces[i]->name) != 0)
- continue;
-
- if (NULL != jtag_interfaces[i]->commands)
- {
- int retval = register_commands(CMD_CTX, NULL,
- jtag_interfaces[i]->commands);
- if (ERROR_OK != retval)
- return retval;
- }
-
- jtag_interface = jtag_interfaces[i];
-
- if (jtag_interface->khz == NULL)
- jtag_interface->khz = default_khz;
- if (jtag_interface->speed_div == NULL)
- jtag_interface->speed_div = default_speed_div;
- if (jtag_interface->power_dropout == NULL)
- jtag_interface->power_dropout = default_power_dropout;
- if (jtag_interface->srst_asserted == NULL)
- jtag_interface->srst_asserted = default_srst_asserted;
-
- return ERROR_OK;
- }
-
- /* no valid interface was found (i.e. the configuration option,
- * didn't match one of the compiled-in interfaces
- */
- LOG_ERROR("The specified debug interface was not found (%s)", CMD_ARGV[0]);
- CALL_COMMAND_HANDLER(handle_interface_list_command);
- return ERROR_JTAG_INVALID_INTERFACE;
-}
-
COMMAND_HANDLER(handle_scan_chain_command)
{
struct jtag_tap *tap;
return ERROR_OK;
}
-COMMAND_HANDLER(handle_reset_config_command)
-{
- int new_cfg = 0;
- int mask = 0;
-
- /* Original versions cared about the order of these tokens:
- * reset_config signals [combination [trst_type [srst_type]]]
- * They also clobbered the previous configuration even on error.
- *
- * Here we don't care about the order, and only change values
- * which have been explicitly specified.
- */
- for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
- int tmp = 0;
- int m;
-
- /* gating */
- m = RESET_SRST_NO_GATING;
- if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
- /* default: don't use JTAG while SRST asserted */;
- else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
- tmp = RESET_SRST_NO_GATING;
- else
- m = 0;
- if (mask & m) {
- LOG_ERROR("extra reset_config %s spec (%s)",
- "gating", *CMD_ARGV);
- return ERROR_INVALID_ARGUMENTS;
- }
- if (m)
- goto next;
-
- /* signals */
- m = RESET_HAS_TRST | RESET_HAS_SRST;
- if (strcmp(*CMD_ARGV, "none") == 0)
- tmp = RESET_NONE;
- else if (strcmp(*CMD_ARGV, "trst_only") == 0)
- tmp = RESET_HAS_TRST;
- else if (strcmp(*CMD_ARGV, "srst_only") == 0)
- tmp = RESET_HAS_SRST;
- else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
- tmp = RESET_HAS_TRST | RESET_HAS_SRST;
- else
- m = 0;
- if (mask & m) {
- LOG_ERROR("extra reset_config %s spec (%s)",
- "signal", *CMD_ARGV);
- return ERROR_INVALID_ARGUMENTS;
- }
- if (m)
- goto next;
-
- /* combination (options for broken wiring) */
- m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
- if (strcmp(*CMD_ARGV, "separate") == 0)
- /* separate reset lines - default */;
- else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
- tmp |= RESET_SRST_PULLS_TRST;
- else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
- tmp |= RESET_TRST_PULLS_SRST;
- else if (strcmp(*CMD_ARGV, "combined") == 0)
- tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
- else
- m = 0;
- if (mask & m) {
- LOG_ERROR("extra reset_config %s spec (%s)",
- "combination", *CMD_ARGV);
- return ERROR_INVALID_ARGUMENTS;
- }
- if (m)
- goto next;
-
- /* trst_type (NOP without HAS_TRST) */
- m = RESET_TRST_OPEN_DRAIN;
- if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
- tmp |= RESET_TRST_OPEN_DRAIN;
- else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
- /* push/pull from adapter - default */;
- else
- m = 0;
- if (mask & m) {
- LOG_ERROR("extra reset_config %s spec (%s)",
- "trst_type", *CMD_ARGV);
- return ERROR_INVALID_ARGUMENTS;
- }
- if (m)
- goto next;
-
- /* srst_type (NOP without HAS_SRST) */
- m |= RESET_SRST_PUSH_PULL;
- if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
- tmp |= RESET_SRST_PUSH_PULL;
- else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
- /* open drain from adapter - default */;
- else
- m = 0;
- if (mask & m) {
- LOG_ERROR("extra reset_config %s spec (%s)",
- "srst_type", *CMD_ARGV);
- return ERROR_INVALID_ARGUMENTS;
- }
- if (m)
- goto next;
-
- /* caller provided nonsense; fail */
- LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
- return ERROR_INVALID_ARGUMENTS;
-
-next:
- /* Remember the bits which were specified (mask)
- * and their new values (new_cfg).
- */
- mask |= m;
- new_cfg |= tmp;
- }
-
- /* clear previous values of those bits, save new values */
- if (mask) {
- int old_cfg = jtag_get_reset_config();
-
- old_cfg &= ~mask;
- new_cfg |= old_cfg;
- jtag_set_reset_config(new_cfg);
- } else
- new_cfg = jtag_get_reset_config();
-
-
- /*
- * Display the (now-)current reset mode
- */
- char *modes[5];
-
- /* minimal JTAG has neither SRST nor TRST (so that's the default) */
- switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
- case RESET_HAS_SRST:
- modes[0] = "srst_only";
- break;
- case RESET_HAS_TRST:
- modes[0] = "trst_only";
- break;
- case RESET_TRST_AND_SRST:
- modes[0] = "trst_and_srst";
- break;
- default:
- modes[0] = "none";
- break;
- }
-
- /* normally SRST and TRST are decoupled; but bugs happen ... */
- switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
- case RESET_SRST_PULLS_TRST:
- modes[1] = "srst_pulls_trst";
- break;
- case RESET_TRST_PULLS_SRST:
- modes[1] = "trst_pulls_srst";
- break;
- case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
- modes[1] = "combined";
- break;
- default:
- modes[1] = "separate";
- break;
- }
-
- /* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
- if (new_cfg & RESET_HAS_TRST) {
- if (new_cfg & RESET_TRST_OPEN_DRAIN)
- modes[3] = " trst_open_drain";
- else
- modes[3] = " trst_push_pull";
- } else
- modes[3] = "";
-
- /* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
- if (new_cfg & RESET_HAS_SRST) {
- if (new_cfg & RESET_SRST_NO_GATING)
- modes[2] = " srst_nogate";
- else
- modes[2] = " srst_gates_jtag";
-
- if (new_cfg & RESET_SRST_PUSH_PULL)
- modes[4] = " srst_push_pull";
- else
- modes[4] = " srst_open_drain";
- } else {
- modes[2] = "";
- modes[4] = "";
- }
-
- command_print(CMD_CTX, "%s %s%s%s%s",
- modes[0], modes[1],
- modes[2], modes[3], modes[4]);
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(handle_adapter_nsrst_delay_command)
-{
- if (CMD_ARGC > 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
- if (CMD_ARGC == 1)
- {
- unsigned delay;
- COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
-
- jtag_set_nsrst_delay(delay);
- }
- command_print(CMD_CTX, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay());
- return ERROR_OK;
-}
-
COMMAND_HANDLER(handle_jtag_ntrst_delay_command)
{
if (CMD_ARGC > 1)
return ERROR_OK;
}
-COMMAND_HANDLER(handle_adapter_nsrst_assert_width_command)
-{
- if (CMD_ARGC > 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
- if (CMD_ARGC == 1)
- {
- unsigned delay;
- COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
-
- jtag_set_nsrst_assert_width(delay);
- }
- command_print(CMD_CTX, "adapter_nsrst_assert_width: %u", jtag_get_nsrst_assert_width());
- return ERROR_OK;
-}
-
COMMAND_HANDLER(handle_jtag_ntrst_assert_width_command)
{
if (CMD_ARGC > 1)
return ERROR_OK;
}
-COMMAND_HANDLER(handle_adapter_khz_command)
-{
- if (CMD_ARGC > 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- int retval = ERROR_OK;
- if (CMD_ARGC == 1)
- {
- unsigned khz = 0;
- COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
-
- retval = jtag_config_khz(khz);
- if (ERROR_OK != retval)
- return retval;
- }
-
- int cur_speed = jtag_get_speed_khz();
- retval = jtag_get_speed_readable(&cur_speed);
- if (ERROR_OK != retval)
- return retval;
-
- if (cur_speed)
- command_print(CMD_CTX, "%d kHz", cur_speed);
- else
- command_print(CMD_CTX, "RCLK - adaptive");
-
- return retval;
-}
-
COMMAND_HANDLER(handle_jtag_rclk_command)
{
if (CMD_ARGC > 1)
return ERROR_OK;
}
-static const struct command_registration interface_command_handlers[] = {
- {
- .name = "adapter_khz",
- .handler = handle_adapter_khz_command,
- .mode = COMMAND_ANY,
- .help = "With an argument, change to the specified maximum "
- "jtag speed. For JTAG, 0 KHz signifies adaptive "
- " clocking. "
- "With or without argument, display current setting.",
- .usage = "[khz]",
- },
- {
- .name = "adapter_nsrst_assert_width",
- .handler = handle_adapter_nsrst_assert_width_command,
- .mode = COMMAND_ANY,
- .help = "delay after asserting SRST in ms",
- .usage = "[milliseconds]",
- },
- {
- .name = "adapter_nsrst_delay",
- .handler = handle_adapter_nsrst_delay_command,
- .mode = COMMAND_ANY,
- .help = "delay after deasserting SRST in ms",
- .usage = "[milliseconds]",
- },
- {
- .name = "interface",
- .handler = handle_interface_command,
- .mode = COMMAND_CONFIG,
- .help = "Select a debug adapter interface (driver)",
- .usage = "driver_name",
- },
- {
- .name = "interface_list",
- .handler = handle_interface_list_command,
- .mode = COMMAND_ANY,
- .help = "List all built-in debug adapter interfaces (drivers)",
- },
- {
- .name = "reset_config",
- .handler = handle_reset_config_command,
- .mode = COMMAND_ANY,
- .help = "configure adapter reset behavior",
- .usage = "[none|trst_only|srst_only|trst_and_srst] "
- "[srst_pulls_trst|trst_pulls_srst|combined|separate] "
- "[srst_gates_jtag|srst_nogate] "
- "[trst_push_pull|trst_open_drain] "
- "[srst_push_pull|srst_open_drain]",
- },
- COMMAND_REGISTRATION_DONE
-};
-
-/**
- * Register the commands which deal with arbitrary debug adapter drivers.
- *
- * @todo Remove internal assumptions that all debug adapters use JTAG for
- * transport. Various types and data structures are not named generically.
- */
-int interface_register_commands(struct command_context *ctx)
-{
- return register_commands(ctx, NULL, interface_command_handlers);
-}
-
static const struct command_registration jtag_command_handlers[] = {
{
.name = "jtag_rclk",
projects / openocd / commitdiff