it87: Add experimental support for IT8771E, IT8772E

Open Hardware Monitor considers IT8771E, IT8772E to be compatible with IT8721F.
Let's see if that is correct. Use at your own risk.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/README b/README
index 22943c8b14e96adac4a6758b497eb60d8d3e2fd6..e529532d3f59e1a9ba75913cd9061d717cbc87a9 100644 (file)
--- a/README
+++ b/README
@@ -30,6 +30,14 @@ Supported chips:
     Prefix: 'it8728'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8771E
+    Prefix: 'it8771'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
+  * IT8772E
+    Prefix: 'it8772'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * IT8783E/F
     Prefix: 'it8783'
     Addresses scanned: from Super I/O config space (8 I/O ports)

diff --git a/it87.c b/it87.c
index de3f821a44076a8600de425577d6fdd250f4fe8a..4421f2ae192240977bf6bb9e893bbd52ba85f1c3 100644 (file)
--- a/it87.c
+++ b/it87.c
@@ -19,6 +19,8 @@
  *            IT8726F  Super I/O chip w/LPC interface
  *            IT8728F  Super I/O chip w/LPC interface
  *            IT8758E  Super I/O chip w/LPC interface
+ *            IT8771E  Super I/O chip w/LPC interface
+ *            IT8772E  Super I/O chip w/LPC interface
  *            IT8783E/F Super I/O chip w/LPC interface
  *            Sis950   A clone of the IT8705F
  *
@@ -67,7 +69,8 @@
 
 #define DRVNAME "it87"
 
-enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8783 };
+enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
+            it8772, it8783 };
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
@@ -149,6 +152,8 @@ static inline void superio_exit(void)
 #define IT8721F_DEVID 0x8721
 #define IT8726F_DEVID 0x8726
 #define IT8728F_DEVID 0x8728
+#define IT8771E_DEVID 0x8771
+#define IT8772E_DEVID 0x8772
 #define IT8783E_DEVID 0x8783
 #define IT87_ACT_REG  0x30
 #define IT87_BASE_REG 0x60
@@ -307,7 +312,9 @@ static inline int has_12mv_adc(const struct it87_data *data)
         * on selected inputs.
         */
        return data->type == it8721
-           || data->type == it8728;
+           || data->type == it8728
+           || data->type == it8771
+           || data->type == it8772;
 }
 
 static inline int has_newer_autopwm(const struct it87_data *data)
@@ -315,9 +322,12 @@ static inline int has_newer_autopwm(const struct it87_data *data)
        /*
         * IT8721F and later have separate registers for the temperature
         * mapping and the manual duty cycle.
+        * [ Assume that also applies to IT8771 / IT8772 ]
         */
        return data->type == it8721
-           || data->type == it8728;
+           || data->type == it8728
+           || data->type == it8771
+           || data->type == it8772;
 }
 
 static u8 in_to_reg(const struct it87_data *data, int nr, long val)
@@ -432,6 +442,8 @@ static inline int has_16bit_fans(const struct it87_data *data)
            || data->type == it8720
            || data->type == it8721
            || data->type == it8728
+           || data->type == it8771
+           || data->type == it8772
            || data->type == it8783;
 }
 
@@ -1676,6 +1688,12 @@ static int __init it87_find(unsigned short *address,
        case IT8728F_DEVID:
                sio_data->type = it8728;
                break;
+       case IT8771E_DEVID:
+               sio_data->type = it8771;
+               break;
+       case IT8772E_DEVID:
+               sio_data->type = it8772;
+               break;
        case IT8783E_DEVID:
                sio_data->type = it8783;
                break;
@@ -1774,10 +1792,11 @@ static int __init it87_find(unsigned short *address,
                superio_select(GPIO);
 
                reg = superio_inb(IT87_SIO_GPIO3_REG);
-               if (sio_data->type == it8721 || sio_data->type == it8728) {
+               if (sio_data->type == it8721 || sio_data->type == it8728
+                   || sio_data->type == it8771 || sio_data->type == it8772) {
                        /*
                         * The IT8721F/IT8758E don't have VID pins at all,
-                        * not sure about the IT8728F.
+                        * not sure about the IT8728F, IT8771E, IT8772E.
                         */
                        sio_data->skip_vid = 1;
                } else {
@@ -1824,7 +1843,8 @@ static int __init it87_find(unsigned short *address,
                if (reg & (1 << 0))
                        sio_data->internal |= (1 << 0);
                if ((reg & (1 << 1)) || sio_data->type == it8721 ||
-                   sio_data->type == it8728)
+                   sio_data->type == it8728 || sio_data->type == it8771 ||
+                   sio_data->type == it8772 )
                        sio_data->internal |= (1 << 1);
 
                sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
@@ -1905,6 +1925,8 @@ static int __devinit it87_probe(struct platform_device *pdev)
                "it8720",
                "it8721",
                "it8728",
+               "it8771",
+               "it8772",
                "it8783",
        };