]> git.sur5r.net Git - u-boot/commitdiff
mpc83xx: Consolidate the ECC support of 83xx
authorDave Liu <r63238@freescale.com>
Wed, 1 Aug 2007 07:00:15 +0000 (15:00 +0800)
committerKim Phillips <kim.phillips@freescale.com>
Fri, 10 Aug 2007 06:13:11 +0000 (01:13 -0500)
Remove the duplicated source code of ecc command on the <board>.c,
for reused, move these code to cpu/mpc83xx directory.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
board/mpc8349emds/mpc8349emds.c
board/mpc8360emds/mpc8360emds.c
cpu/mpc83xx/Makefile
cpu/mpc83xx/ecc.c [new file with mode: 0644]

index 071591ed8356fc0de728812a5744dceb998d268b..521d1bbd4ed752b8f9434ce028ec1fd208b78533 100644 (file)
@@ -29,7 +29,6 @@
 #include <i2c.h>
 #include <spd.h>
 #include <miiphy.h>
-#include <command.h>
 #if defined(CONFIG_SPD_EEPROM)
 #include <spd_sdram.h>
 #endif
@@ -258,332 +257,6 @@ void sdram_init(void)
 }
 #endif
 
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
-       volatile immap_t *immap = (immap_t *)CFG_IMMR;
-       volatile ddr83xx_t *ddr = &immap->ddr;
-
-       printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-       /* Interrupts */
-       printf("Memory Error Interrupt Enable:\n");
-       printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-                       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-       printf("  Single-Bit Error Interrupt Enable: %d\n",
-                       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-       printf("  Memory Select Error Interrupt Enable: %d\n\n",
-                       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-       /* Error disable */
-       printf("Memory Error Disable:\n");
-       printf("  Multiple-Bit Error Disable: %d\n",
-                       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-       printf("  Sinle-Bit Error Disable: %d\n",
-                       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-       printf("  Memory Select Error Disable: %d\n\n",
-                       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-       /* Error injection */
-       printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
-                       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-       printf("Memory Data Path Error Injection Mask ECC:\n");
-       printf("  ECC Mirror Byte: %d\n",
-                       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-       printf("  ECC Injection Enable: %d\n",
-                       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-       printf("  ECC Error Injection Mask: 0x%02x\n\n",
-                       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-       /* SBE counter/threshold */
-       printf("Memory Single-Bit Error Management (0..255):\n");
-       printf("  Single-Bit Error Threshold: %d\n",
-                       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-       printf("  Single-Bit Error Counter: %d\n\n",
-                       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-       /* Error detect */
-       printf("Memory Error Detect:\n");
-       printf("  Multiple Memory Errors: %d\n",
-                       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-       printf("  Multiple-Bit Error: %d\n",
-                       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-       printf("  Single-Bit Error: %d\n",
-                       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-       printf("  Memory Select Error: %d\n\n",
-                       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-       /* Capture data */
-       printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
-       printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
-                       ddr->capture_data_hi, ddr->capture_data_lo);
-       printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-               ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-       printf("Memory Error Attributes Capture:\n");
-       printf("  Data Beat Number: %d\n",
-                       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
-       printf("  Transaction Size: %d\n",
-                       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
-       printf("  Transaction Source: %d\n",
-                       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
-       printf("  Transaction Type: %d\n",
-                       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
-       printf("  Error Information Valid: %d\n\n",
-                       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-       volatile immap_t *immap = (immap_t *)CFG_IMMR;
-       volatile ddr83xx_t *ddr = &immap->ddr;
-       volatile u32 val;
-       u64 *addr, count, val64;
-       register u64 *i;
-
-       if (argc > 4) {
-               printf ("Usage:\n%s\n", cmdtp->usage);
-               return 1;
-       }
-
-       if (argc == 2) {
-               if (strcmp(argv[1], "status") == 0) {
-                       ecc_print_status();
-                       return 0;
-               } else if (strcmp(argv[1], "captureclear") == 0) {
-                       ddr->capture_address = 0;
-                       ddr->capture_data_hi = 0;
-                       ddr->capture_data_lo = 0;
-                       ddr->capture_ecc = 0;
-                       ddr->capture_attributes = 0;
-                       return 0;
-               }
-       }
-
-       if (argc == 3) {
-               if (strcmp(argv[1], "sbecnt") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 10);
-                       if (val > 255) {
-                               printf("Incorrect Counter value, should be 0..255\n");
-                               return 1;
-                       }
-
-                       val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-                       val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-                       ddr->err_sbe = val;
-                       return 0;
-               } else if (strcmp(argv[1], "sbethr") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 10);
-                       if (val > 255) {
-                               printf("Incorrect Counter value, should be 0..255\n");
-                               return 1;
-                       }
-
-                       val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-                       val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-                       ddr->err_sbe = val;
-                       return 0;
-               } else if (strcmp(argv[1], "errdisable") == 0) {
-                       val = ddr->err_disable;
-
-                       if (strcmp(argv[2], "+sbe") == 0) {
-                               val |= ECC_ERROR_DISABLE_SBED;
-                       } else if (strcmp(argv[2], "+mbe") == 0) {
-                               val |= ECC_ERROR_DISABLE_MBED;
-                       } else if (strcmp(argv[2], "+mse") == 0) {
-                               val |= ECC_ERROR_DISABLE_MSED;
-                       } else if (strcmp(argv[2], "+all") == 0) {
-                               val |= (ECC_ERROR_DISABLE_SBED |
-                                       ECC_ERROR_DISABLE_MBED |
-                                       ECC_ERROR_DISABLE_MSED);
-                       } else if (strcmp(argv[2], "-sbe") == 0) {
-                               val &= ~ECC_ERROR_DISABLE_SBED;
-                       } else if (strcmp(argv[2], "-mbe") == 0) {
-                               val &= ~ECC_ERROR_DISABLE_MBED;
-                       } else if (strcmp(argv[2], "-mse") == 0) {
-                               val &= ~ECC_ERROR_DISABLE_MSED;
-                       } else if (strcmp(argv[2], "-all") == 0) {
-                               val &= ~(ECC_ERROR_DISABLE_SBED |
-                                       ECC_ERROR_DISABLE_MBED |
-                                       ECC_ERROR_DISABLE_MSED);
-                       } else {
-                               printf("Incorrect err_disable field\n");
-                               return 1;
-                       }
-
-                       ddr->err_disable = val;
-                       __asm__ __volatile__ ("sync");
-                       __asm__ __volatile__ ("isync");
-                       return 0;
-               } else if (strcmp(argv[1], "errdetectclr") == 0) {
-                       val = ddr->err_detect;
-
-                       if (strcmp(argv[2], "mme") == 0) {
-                               val |= ECC_ERROR_DETECT_MME;
-                       } else if (strcmp(argv[2], "sbe") == 0) {
-                               val |= ECC_ERROR_DETECT_SBE;
-                       } else if (strcmp(argv[2], "mbe") == 0) {
-                               val |= ECC_ERROR_DETECT_MBE;
-                       } else if (strcmp(argv[2], "mse") == 0) {
-                               val |= ECC_ERROR_DETECT_MSE;
-                       } else if (strcmp(argv[2], "all") == 0) {
-                               val |= (ECC_ERROR_DETECT_MME |
-                                       ECC_ERROR_DETECT_MBE |
-                                       ECC_ERROR_DETECT_SBE |
-                                       ECC_ERROR_DETECT_MSE);
-                       } else {
-                               printf("Incorrect err_detect field\n");
-                               return 1;
-                       }
-
-                       ddr->err_detect = val;
-                       return 0;
-               } else if (strcmp(argv[1], "injectdatahi") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 16);
-
-                       ddr->data_err_inject_hi = val;
-                       return 0;
-               } else if (strcmp(argv[1], "injectdatalo") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 16);
-
-                       ddr->data_err_inject_lo = val;
-                       return 0;
-               } else if (strcmp(argv[1], "injectecc") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 16);
-                       if (val > 0xff) {
-                               printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
-                               return 1;
-                       }
-                       val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-                       ddr->ecc_err_inject = val;
-                       return 0;
-               } else if (strcmp(argv[1], "inject") == 0) {
-                       val = ddr->ecc_err_inject;
-
-                       if (strcmp(argv[2], "en") == 0)
-                               val |= ECC_ERR_INJECT_EIEN;
-                       else if (strcmp(argv[2], "dis") == 0)
-                               val &= ~ECC_ERR_INJECT_EIEN;
-                       else
-                               printf("Incorrect command\n");
-
-                       ddr->ecc_err_inject = val;
-                       __asm__ __volatile__ ("sync");
-                       __asm__ __volatile__ ("isync");
-                       return 0;
-               } else if (strcmp(argv[1], "mirror") == 0) {
-                       val = ddr->ecc_err_inject;
-
-                       if (strcmp(argv[2], "en") == 0)
-                               val |= ECC_ERR_INJECT_EMB;
-                       else if (strcmp(argv[2], "dis") == 0)
-                               val &= ~ECC_ERR_INJECT_EMB;
-                       else
-                               printf("Incorrect command\n");
-
-                       ddr->ecc_err_inject = val;
-                       return 0;
-               }
-       }
-
-       if (argc == 4) {
-               if (strcmp(argv[1], "test") == 0) {
-                       addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
-                       count = simple_strtoul(argv[3], NULL, 16);
-
-                       if ((u32)addr % 8) {
-                               printf("Address not alligned on double word boundary\n");
-                               return 1;
-                       }
-
-                       disable_interrupts();
-                       icache_disable();
-
-                       for (i = addr; i < addr + count; i++) {
-                               /* enable injects */
-                               ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-                               __asm__ __volatile__ ("sync");
-                               __asm__ __volatile__ ("isync");
-
-                               /* write memory location injecting errors */
-                               *i = 0x1122334455667788ULL;
-                               __asm__ __volatile__ ("sync");
-
-                               /* disable injects */
-                               ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-                               __asm__ __volatile__ ("sync");
-                               __asm__ __volatile__ ("isync");
-
-                               /* read data, this generates ECC error */
-                               val64 = *i;
-                               __asm__ __volatile__ ("sync");
-
-                               /* disable errors for ECC */
-                               ddr->err_disable |= ~ECC_ERROR_ENABLE;
-                               __asm__ __volatile__ ("sync");
-                               __asm__ __volatile__ ("isync");
-
-                               /* re-initialize memory, write the location again
-                                * NOT injecting errors this time */
-                               *i = 0xcafecafecafecafeULL;
-                               __asm__ __volatile__ ("sync");
-
-                               /* enable errors for ECC */
-                               ddr->err_disable &= ECC_ERROR_ENABLE;
-                               __asm__ __volatile__ ("sync");
-                               __asm__ __volatile__ ("isync");
-                       }
-
-                       icache_enable();
-                       enable_interrupts();
-
-                       return 0;
-               }
-       }
-
-       printf ("Usage:\n%s\n", cmdtp->usage);
-       return 1;
-}
-
-U_BOOT_CMD(
-       ecc,     4,     0,      do_ecc,
-       "ecc     - support for DDR ECC features\n",
-       "status              - print out status info\n"
-       "ecc captureclear        - clear capture regs data\n"
-       "ecc sbecnt <val>        - set Single-Bit Error counter\n"
-       "ecc sbethr <val>        - set Single-Bit Threshold\n"
-       "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-       "  [-|+]sbe - Single-Bit Error\n"
-       "  [-|+]mbe - Multiple-Bit Error\n"
-       "  [-|+]mse - Memory Select Error\n"
-       "  [-|+]all - all errors\n"
-       "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-       "  mme - Multiple Memory Errors\n"
-       "  sbe - Single-Bit Error\n"
-       "  mbe - Multiple-Bit Error\n"
-       "  mse - Memory Select Error\n"
-       "  all - all errors\n"
-       "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-       "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-       "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-       "ecc inject <en|dis>    - enable/disable error injection\n"
-       "ecc mirror <en|dis>    - enable/disable mirror byte\n"
-       "ecc test <addr> <cnt>  - test mem region:\n"
-       "  - enables injects\n"
-       "  - writes pattern injecting errors\n"
-       "  - disables injects\n"
-       "  - reads pattern back, generates error\n"
-       "  - re-inits memory"
-);
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
 #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
index b109317be44d8a284a950836f04b2b7f97c6a50d..3fa093d1d55eb598503c1ff94b5369db70312443 100644 (file)
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
  * Dave Liu <daveliu@freescale.com>
- * based on board/mpc8349emds/mpc8349emds.c
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -19,7 +17,6 @@
 #include <i2c.h>
 #include <spd.h>
 #include <miiphy.h>
-#include <command.h>
 #if defined(CONFIG_PCI)
 #include <pci.h>
 #endif
@@ -288,381 +285,6 @@ void sdram_init(void)
 }
 #endif
 
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
-       volatile ddr83xx_t *ddr = &immap->ddr;
-
-       printf("\nECC mode: %s\n\n",
-              (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-       /* Interrupts */
-       printf("Memory Error Interrupt Enable:\n");
-       printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-              (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-       printf("  Single-Bit Error Interrupt Enable: %d\n",
-              (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-       printf("  Memory Select Error Interrupt Enable: %d\n\n",
-              (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-       /* Error disable */
-       printf("Memory Error Disable:\n");
-       printf("  Multiple-Bit Error Disable: %d\n",
-              (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-       printf("  Sinle-Bit Error Disable: %d\n",
-              (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-       printf("  Memory Select Error Disable: %d\n\n",
-              (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-       /* Error injection */
-       printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
-              ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-       printf("Memory Data Path Error Injection Mask ECC:\n");
-       printf("  ECC Mirror Byte: %d\n",
-              (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-       printf("  ECC Injection Enable: %d\n",
-              (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-       printf("  ECC Error Injection Mask: 0x%02x\n\n",
-              ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-       /* SBE counter/threshold */
-       printf("Memory Single-Bit Error Management (0..255):\n");
-       printf("  Single-Bit Error Threshold: %d\n",
-              (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-       printf("  Single-Bit Error Counter: %d\n\n",
-              (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-       /* Error detect */
-       printf("Memory Error Detect:\n");
-       printf("  Multiple Memory Errors: %d\n",
-              (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-       printf("  Multiple-Bit Error: %d\n",
-              (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-       printf("  Single-Bit Error: %d\n",
-              (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-       printf("  Memory Select Error: %d\n\n",
-              (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-       /* Capture data */
-       printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
-       printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
-              ddr->capture_data_hi, ddr->capture_data_lo);
-       printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-              ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-       printf("Memory Error Attributes Capture:\n");
-       printf(" Data Beat Number: %d\n",
-              (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
-              ECC_CAPT_ATTR_BNUM_SHIFT);
-       printf("  Transaction Size: %d\n",
-              (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
-              ECC_CAPT_ATTR_TSIZ_SHIFT);
-       printf("  Transaction Source: %d\n",
-              (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
-              ECC_CAPT_ATTR_TSRC_SHIFT);
-       printf("  Transaction Type: %d\n",
-              (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
-              ECC_CAPT_ATTR_TTYP_SHIFT);
-       printf("  Error Information Valid: %d\n\n",
-              ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
-       volatile ddr83xx_t *ddr = &immap->ddr;
-       volatile u32 val;
-       u64 *addr;
-       u32 count;
-       register u64 *i;
-       u32 ret[2];
-       u32 pattern[2];
-       u32 writeback[2];
-
-       /* The pattern is written into memory to generate error */
-       pattern[0] = 0xfedcba98UL;
-       pattern[1] = 0x76543210UL;
-
-       /* After injecting error, re-initialize the memory with the value */
-       writeback[0] = 0x01234567UL;
-       writeback[1] = 0x89abcdefUL;
-
-       if (argc > 4) {
-               printf("Usage:\n%s\n", cmdtp->usage);
-               return 1;
-       }
-
-       if (argc == 2) {
-               if (strcmp(argv[1], "status") == 0) {
-                       ecc_print_status();
-                       return 0;
-               } else if (strcmp(argv[1], "captureclear") == 0) {
-                       ddr->capture_address = 0;
-                       ddr->capture_data_hi = 0;
-                       ddr->capture_data_lo = 0;
-                       ddr->capture_ecc = 0;
-                       ddr->capture_attributes = 0;
-                       return 0;
-               }
-       }
-       if (argc == 3) {
-               if (strcmp(argv[1], "sbecnt") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 10);
-                       if (val > 255) {
-                               printf("Incorrect Counter value, "
-                                      "should be 0..255\n");
-                               return 1;
-                       }
-
-                       val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-                       val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-                       ddr->err_sbe = val;
-                       return 0;
-               } else if (strcmp(argv[1], "sbethr") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 10);
-                       if (val > 255) {
-                               printf("Incorrect Counter value, "
-                                      "should be 0..255\n");
-                               return 1;
-                       }
-
-                       val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-                       val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-                       ddr->err_sbe = val;
-                       return 0;
-               } else if (strcmp(argv[1], "errdisable") == 0) {
-                       val = ddr->err_disable;
-
-                       if (strcmp(argv[2], "+sbe") == 0) {
-                               val |= ECC_ERROR_DISABLE_SBED;
-                       } else if (strcmp(argv[2], "+mbe") == 0) {
-                               val |= ECC_ERROR_DISABLE_MBED;
-                       } else if (strcmp(argv[2], "+mse") == 0) {
-                               val |= ECC_ERROR_DISABLE_MSED;
-                       } else if (strcmp(argv[2], "+all") == 0) {
-                               val |= (ECC_ERROR_DISABLE_SBED |
-                                       ECC_ERROR_DISABLE_MBED |
-                                       ECC_ERROR_DISABLE_MSED);
-                       } else if (strcmp(argv[2], "-sbe") == 0) {
-                               val &= ~ECC_ERROR_DISABLE_SBED;
-                       } else if (strcmp(argv[2], "-mbe") == 0) {
-                               val &= ~ECC_ERROR_DISABLE_MBED;
-                       } else if (strcmp(argv[2], "-mse") == 0) {
-                               val &= ~ECC_ERROR_DISABLE_MSED;
-                       } else if (strcmp(argv[2], "-all") == 0) {
-                               val &= ~(ECC_ERROR_DISABLE_SBED |
-                                        ECC_ERROR_DISABLE_MBED |
-                                        ECC_ERROR_DISABLE_MSED);
-                       } else {
-                               printf("Incorrect err_disable field\n");
-                               return 1;
-                       }
-
-                       ddr->err_disable = val;
-                       __asm__ __volatile__("sync");
-                       __asm__ __volatile__("isync");
-                       return 0;
-               } else if (strcmp(argv[1], "errdetectclr") == 0) {
-                       val = ddr->err_detect;
-
-                       if (strcmp(argv[2], "mme") == 0) {
-                               val |= ECC_ERROR_DETECT_MME;
-                       } else if (strcmp(argv[2], "sbe") == 0) {
-                               val |= ECC_ERROR_DETECT_SBE;
-                       } else if (strcmp(argv[2], "mbe") == 0) {
-                               val |= ECC_ERROR_DETECT_MBE;
-                       } else if (strcmp(argv[2], "mse") == 0) {
-                               val |= ECC_ERROR_DETECT_MSE;
-                       } else if (strcmp(argv[2], "all") == 0) {
-                               val |= (ECC_ERROR_DETECT_MME |
-                                       ECC_ERROR_DETECT_MBE |
-                                       ECC_ERROR_DETECT_SBE |
-                                       ECC_ERROR_DETECT_MSE);
-                       } else {
-                               printf("Incorrect err_detect field\n");
-                               return 1;
-                       }
-
-                       ddr->err_detect = val;
-                       return 0;
-               } else if (strcmp(argv[1], "injectdatahi") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 16);
-
-                       ddr->data_err_inject_hi = val;
-                       return 0;
-               } else if (strcmp(argv[1], "injectdatalo") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 16);
-
-                       ddr->data_err_inject_lo = val;
-                       return 0;
-               } else if (strcmp(argv[1], "injectecc") == 0) {
-                       val = simple_strtoul(argv[2], NULL, 16);
-                       if (val > 0xff) {
-                               printf("Incorrect ECC inject mask, "
-                                      "should be 0x00..0xff\n");
-                               return 1;
-                       }
-                       val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-                       ddr->ecc_err_inject = val;
-                       return 0;
-               } else if (strcmp(argv[1], "inject") == 0) {
-                       val = ddr->ecc_err_inject;
-
-                       if (strcmp(argv[2], "en") == 0)
-                               val |= ECC_ERR_INJECT_EIEN;
-                       else if (strcmp(argv[2], "dis") == 0)
-                               val &= ~ECC_ERR_INJECT_EIEN;
-                       else
-                               printf("Incorrect command\n");
-
-                       ddr->ecc_err_inject = val;
-                       __asm__ __volatile__("sync");
-                       __asm__ __volatile__("isync");
-                       return 0;
-               } else if (strcmp(argv[1], "mirror") == 0) {
-                       val = ddr->ecc_err_inject;
-
-                       if (strcmp(argv[2], "en") == 0)
-                               val |= ECC_ERR_INJECT_EMB;
-                       else if (strcmp(argv[2], "dis") == 0)
-                               val &= ~ECC_ERR_INJECT_EMB;
-                       else
-                               printf("Incorrect command\n");
-
-                       ddr->ecc_err_inject = val;
-                       return 0;
-               }
-       }
-       if (argc == 4) {
-               if (strcmp(argv[1], "testdw") == 0) {
-                       addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-                       count = simple_strtoul(argv[3], NULL, 16);
-
-                       if ((u32) addr % 8) {
-                               printf("Address not alligned on "
-                                      "double word boundary\n");
-                               return 1;
-                       }
-                       disable_interrupts();
-
-                       for (i = addr; i < addr + count; i++) {
-
-                               /* enable injects */
-                               ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-                               __asm__ __volatile__("sync");
-                               __asm__ __volatile__("isync");
-
-                               /* write memory location injecting errors */
-                               ppcDWstore((u32 *) i, pattern);
-                               __asm__ __volatile__("sync");
-
-                               /* disable injects */
-                               ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-                               __asm__ __volatile__("sync");
-                               __asm__ __volatile__("isync");
-
-                               /* read data, this generates ECC error */
-                               ppcDWload((u32 *) i, ret);
-                               __asm__ __volatile__("sync");
-
-                               /* re-initialize memory, double word write the location again,
-                                * generates new ECC code this time */
-                               ppcDWstore((u32 *) i, writeback);
-                               __asm__ __volatile__("sync");
-                       }
-                       enable_interrupts();
-                       return 0;
-               }
-               if (strcmp(argv[1], "testword") == 0) {
-                       addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-                       count = simple_strtoul(argv[3], NULL, 16);
-
-                       if ((u32) addr % 8) {
-                               printf("Address not alligned on "
-                                      "double word boundary\n");
-                               return 1;
-                       }
-                       disable_interrupts();
-
-                       for (i = addr; i < addr + count; i++) {
-
-                               /* enable injects */
-                               ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-                               __asm__ __volatile__("sync");
-                               __asm__ __volatile__("isync");
-
-                               /* write memory location injecting errors */
-                               *(u32 *) i = 0xfedcba98UL;
-                               __asm__ __volatile__("sync");
-
-                               /* sub double word write,
-                                * bus will read-modify-write,
-                                * generates ECC error */
-                               *((u32 *) i + 1) = 0x76543210UL;
-                               __asm__ __volatile__("sync");
-
-                               /* disable injects */
-                               ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-                               __asm__ __volatile__("sync");
-                               __asm__ __volatile__("isync");
-
-                               /* re-initialize memory,
-                                * double word write the location again,
-                                * generates new ECC code this time */
-                               ppcDWstore((u32 *) i, writeback);
-                               __asm__ __volatile__("sync");
-                       }
-                       enable_interrupts();
-                       return 0;
-               }
-       }
-       printf("Usage:\n%s\n", cmdtp->usage);
-       return 1;
-}
-
-U_BOOT_CMD(ecc, 4, 0, do_ecc,
-          "ecc     - support for DDR ECC features\n",
-          "status              - print out status info\n"
-          "ecc captureclear        - clear capture regs data\n"
-          "ecc sbecnt <val>        - set Single-Bit Error counter\n"
-          "ecc sbethr <val>        - set Single-Bit Threshold\n"
-          "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-          "  [-|+]sbe - Single-Bit Error\n"
-          "  [-|+]mbe - Multiple-Bit Error\n"
-          "  [-|+]mse - Memory Select Error\n"
-          "  [-|+]all - all errors\n"
-          "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-          "  mme - Multiple Memory Errors\n"
-          "  sbe - Single-Bit Error\n"
-          "  mbe - Multiple-Bit Error\n"
-          "  mse - Memory Select Error\n"
-          "  all - all errors\n"
-          "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-          "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-          "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-          "ecc inject <en|dis>    - enable/disable error injection\n"
-          "ecc mirror <en|dis>    - enable/disable mirror byte\n"
-          "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
-          "  - enables injects\n"
-          "  - writes pattern injecting errors with double word access\n"
-          "  - disables injects\n"
-          "  - reads pattern back with double word access, generates error\n"
-          "  - re-inits memory\n"
-          "ecc testword <addr> <cnt>  - test mem region with word access:\n"
-          "  - enables injects\n"
-          "  - writes pattern injecting errors with word access\n"
-          "  - writes pattern with word access, generates error\n"
-          "  - disables injects\n" "  - re-inits memory");
-#endif                         /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
 #if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \
      && defined(CONFIG_OF_BOARD_SETUP)
 
index bb96f774fe4e3cc795c6aa1bd0742a458fd028a5..232997005102a39036304f01d3c709d58976b475 100644 (file)
@@ -29,7 +29,7 @@ LIB   = $(obj)lib$(CPU).a
 
 START  = start.o
 COBJS  = traps.o cpu.o cpu_init.o speed.o interrupts.o \
-         spd_sdram.o qe_io.o pci.o
+         spd_sdram.o ecc.o qe_io.o pci.o
 
 SRCS   := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS   := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc83xx/ecc.c b/cpu/mpc83xx/ecc.c
new file mode 100644 (file)
index 0000000..6f13094
--- /dev/null
@@ -0,0 +1,390 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on the contribution of Marian Balakowicz <m8@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <command.h>
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+void ecc_print_status(void)
+{
+       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile ddr83xx_t *ddr = &immap->ddr;
+
+       printf("\nECC mode: %s\n\n",
+              (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+       /* Interrupts */
+       printf("Memory Error Interrupt Enable:\n");
+       printf("  Multiple-Bit Error Interrupt Enable: %d\n",
+              (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+       printf("  Single-Bit Error Interrupt Enable: %d\n",
+              (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+       printf("  Memory Select Error Interrupt Enable: %d\n\n",
+              (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+       /* Error disable */
+       printf("Memory Error Disable:\n");
+       printf("  Multiple-Bit Error Disable: %d\n",
+              (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+       printf("  Sinle-Bit Error Disable: %d\n",
+              (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+       printf("  Memory Select Error Disable: %d\n\n",
+              (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+       /* Error injection */
+       printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+              ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+       printf("Memory Data Path Error Injection Mask ECC:\n");
+       printf("  ECC Mirror Byte: %d\n",
+              (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+       printf("  ECC Injection Enable: %d\n",
+              (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+       printf("  ECC Error Injection Mask: 0x%02x\n\n",
+              ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+       /* SBE counter/threshold */
+       printf("Memory Single-Bit Error Management (0..255):\n");
+       printf("  Single-Bit Error Threshold: %d\n",
+              (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+       printf("  Single-Bit Error Counter: %d\n\n",
+              (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+       /* Error detect */
+       printf("Memory Error Detect:\n");
+       printf("  Multiple Memory Errors: %d\n",
+              (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+       printf("  Multiple-Bit Error: %d\n",
+              (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+       printf("  Single-Bit Error: %d\n",
+              (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+       printf("  Memory Select Error: %d\n\n",
+              (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+       /* Capture data */
+       printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
+       printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+              ddr->capture_data_hi, ddr->capture_data_lo);
+       printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+              ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+       printf("Memory Error Attributes Capture:\n");
+       printf(" Data Beat Number: %d\n",
+              (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
+              ECC_CAPT_ATTR_BNUM_SHIFT);
+       printf("  Transaction Size: %d\n",
+              (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
+              ECC_CAPT_ATTR_TSIZ_SHIFT);
+       printf("  Transaction Source: %d\n",
+              (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
+              ECC_CAPT_ATTR_TSRC_SHIFT);
+       printf("  Transaction Type: %d\n",
+              (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
+              ECC_CAPT_ATTR_TTYP_SHIFT);
+       printf("  Error Information Valid: %d\n\n",
+              ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile ddr83xx_t *ddr = &immap->ddr;
+       volatile u32 val;
+       u64 *addr;
+       u32 count;
+       register u64 *i;
+       u32 ret[2];
+       u32 pattern[2];
+       u32 writeback[2];
+
+       /* The pattern is written into memory to generate error */
+       pattern[0] = 0xfedcba98UL;
+       pattern[1] = 0x76543210UL;
+
+       /* After injecting error, re-initialize the memory with the value */
+       writeback[0] = 0x01234567UL;
+       writeback[1] = 0x89abcdefUL;
+
+       if (argc > 4) {
+               printf("Usage:\n%s\n", cmdtp->usage);
+               return 1;
+       }
+
+       if (argc == 2) {
+               if (strcmp(argv[1], "status") == 0) {
+                       ecc_print_status();
+                       return 0;
+               } else if (strcmp(argv[1], "captureclear") == 0) {
+                       ddr->capture_address = 0;
+                       ddr->capture_data_hi = 0;
+                       ddr->capture_data_lo = 0;
+                       ddr->capture_ecc = 0;
+                       ddr->capture_attributes = 0;
+                       return 0;
+               }
+       }
+       if (argc == 3) {
+               if (strcmp(argv[1], "sbecnt") == 0) {
+                       val = simple_strtoul(argv[2], NULL, 10);
+                       if (val > 255) {
+                               printf("Incorrect Counter value, "
+                                      "should be 0..255\n");
+                               return 1;
+                       }
+
+                       val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+                       val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+                       ddr->err_sbe = val;
+                       return 0;
+               } else if (strcmp(argv[1], "sbethr") == 0) {
+                       val = simple_strtoul(argv[2], NULL, 10);
+                       if (val > 255) {
+                               printf("Incorrect Counter value, "
+                                      "should be 0..255\n");
+                               return 1;
+                       }
+
+                       val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+                       val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+                       ddr->err_sbe = val;
+                       return 0;
+               } else if (strcmp(argv[1], "errdisable") == 0) {
+                       val = ddr->err_disable;
+
+                       if (strcmp(argv[2], "+sbe") == 0) {
+                               val |= ECC_ERROR_DISABLE_SBED;
+                       } else if (strcmp(argv[2], "+mbe") == 0) {
+                               val |= ECC_ERROR_DISABLE_MBED;
+                       } else if (strcmp(argv[2], "+mse") == 0) {
+                               val |= ECC_ERROR_DISABLE_MSED;
+                       } else if (strcmp(argv[2], "+all") == 0) {
+                               val |= (ECC_ERROR_DISABLE_SBED |
+                                       ECC_ERROR_DISABLE_MBED |
+                                       ECC_ERROR_DISABLE_MSED);
+                       } else if (strcmp(argv[2], "-sbe") == 0) {
+                               val &= ~ECC_ERROR_DISABLE_SBED;
+                       } else if (strcmp(argv[2], "-mbe") == 0) {
+                               val &= ~ECC_ERROR_DISABLE_MBED;
+                       } else if (strcmp(argv[2], "-mse") == 0) {
+                               val &= ~ECC_ERROR_DISABLE_MSED;
+                       } else if (strcmp(argv[2], "-all") == 0) {
+                               val &= ~(ECC_ERROR_DISABLE_SBED |
+                                        ECC_ERROR_DISABLE_MBED |
+                                        ECC_ERROR_DISABLE_MSED);
+                       } else {
+                               printf("Incorrect err_disable field\n");
+                               return 1;
+                       }
+
+                       ddr->err_disable = val;
+                       __asm__ __volatile__("sync");
+                       __asm__ __volatile__("isync");
+                       return 0;
+               } else if (strcmp(argv[1], "errdetectclr") == 0) {
+                       val = ddr->err_detect;
+
+                       if (strcmp(argv[2], "mme") == 0) {
+                               val |= ECC_ERROR_DETECT_MME;
+                       } else if (strcmp(argv[2], "sbe") == 0) {
+                               val |= ECC_ERROR_DETECT_SBE;
+                       } else if (strcmp(argv[2], "mbe") == 0) {
+                               val |= ECC_ERROR_DETECT_MBE;
+                       } else if (strcmp(argv[2], "mse") == 0) {
+                               val |= ECC_ERROR_DETECT_MSE;
+                       } else if (strcmp(argv[2], "all") == 0) {
+                               val |= (ECC_ERROR_DETECT_MME |
+                                       ECC_ERROR_DETECT_MBE |
+                                       ECC_ERROR_DETECT_SBE |
+                                       ECC_ERROR_DETECT_MSE);
+                       } else {
+                               printf("Incorrect err_detect field\n");
+                               return 1;
+                       }
+
+                       ddr->err_detect = val;
+                       return 0;
+               } else if (strcmp(argv[1], "injectdatahi") == 0) {
+                       val = simple_strtoul(argv[2], NULL, 16);
+
+                       ddr->data_err_inject_hi = val;
+                       return 0;
+               } else if (strcmp(argv[1], "injectdatalo") == 0) {
+                       val = simple_strtoul(argv[2], NULL, 16);
+
+                       ddr->data_err_inject_lo = val;
+                       return 0;
+               } else if (strcmp(argv[1], "injectecc") == 0) {
+                       val = simple_strtoul(argv[2], NULL, 16);
+                       if (val > 0xff) {
+                               printf("Incorrect ECC inject mask, "
+                                      "should be 0x00..0xff\n");
+                               return 1;
+                       }
+                       val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+                       ddr->ecc_err_inject = val;
+                       return 0;
+               } else if (strcmp(argv[1], "inject") == 0) {
+                       val = ddr->ecc_err_inject;
+
+                       if (strcmp(argv[2], "en") == 0)
+                               val |= ECC_ERR_INJECT_EIEN;
+                       else if (strcmp(argv[2], "dis") == 0)
+                               val &= ~ECC_ERR_INJECT_EIEN;
+                       else
+                               printf("Incorrect command\n");
+
+                       ddr->ecc_err_inject = val;
+                       __asm__ __volatile__("sync");
+                       __asm__ __volatile__("isync");
+                       return 0;
+               } else if (strcmp(argv[1], "mirror") == 0) {
+                       val = ddr->ecc_err_inject;
+
+                       if (strcmp(argv[2], "en") == 0)
+                               val |= ECC_ERR_INJECT_EMB;
+                       else if (strcmp(argv[2], "dis") == 0)
+                               val &= ~ECC_ERR_INJECT_EMB;
+                       else
+                               printf("Incorrect command\n");
+
+                       ddr->ecc_err_inject = val;
+                       return 0;
+               }
+       }
+       if (argc == 4) {
+               if (strcmp(argv[1], "testdw") == 0) {
+                       addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+                       count = simple_strtoul(argv[3], NULL, 16);
+
+                       if ((u32) addr % 8) {
+                               printf("Address not alligned on "
+                                      "double word boundary\n");
+                               return 1;
+                       }
+                       disable_interrupts();
+
+                       for (i = addr; i < addr + count; i++) {
+
+                               /* enable injects */
+                               ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+                               __asm__ __volatile__("sync");
+                               __asm__ __volatile__("isync");
+
+                               /* write memory location injecting errors */
+                               ppcDWstore((u32 *) i, pattern);
+                               __asm__ __volatile__("sync");
+
+                               /* disable injects */
+                               ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+                               __asm__ __volatile__("sync");
+                               __asm__ __volatile__("isync");
+
+                               /* read data, this generates ECC error */
+                               ppcDWload((u32 *) i, ret);
+                               __asm__ __volatile__("sync");
+
+                               /* re-initialize memory, double word write the location again,
+                                * generates new ECC code this time */
+                               ppcDWstore((u32 *) i, writeback);
+                               __asm__ __volatile__("sync");
+                       }
+                       enable_interrupts();
+                       return 0;
+               }
+               if (strcmp(argv[1], "testword") == 0) {
+                       addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+                       count = simple_strtoul(argv[3], NULL, 16);
+
+                       if ((u32) addr % 8) {
+                               printf("Address not alligned on "
+                                      "double word boundary\n");
+                               return 1;
+                       }
+                       disable_interrupts();
+
+                       for (i = addr; i < addr + count; i++) {
+
+                               /* enable injects */
+                               ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+                               __asm__ __volatile__("sync");
+                               __asm__ __volatile__("isync");
+
+                               /* write memory location injecting errors */
+                               *(u32 *) i = 0xfedcba98UL;
+                               __asm__ __volatile__("sync");
+
+                               /* sub double word write,
+                                * bus will read-modify-write,
+                                * generates ECC error */
+                               *((u32 *) i + 1) = 0x76543210UL;
+                               __asm__ __volatile__("sync");
+
+                               /* disable injects */
+                               ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+                               __asm__ __volatile__("sync");
+                               __asm__ __volatile__("isync");
+
+                               /* re-initialize memory,
+                                * double word write the location again,
+                                * generates new ECC code this time */
+                               ppcDWstore((u32 *) i, writeback);
+                               __asm__ __volatile__("sync");
+                       }
+                       enable_interrupts();
+                       return 0;
+               }
+       }
+       printf("Usage:\n%s\n", cmdtp->usage);
+       return 1;
+}
+
+U_BOOT_CMD(ecc, 4, 0, do_ecc,
+          "ecc     - support for DDR ECC features\n",
+          "status              - print out status info\n"
+          "ecc captureclear        - clear capture regs data\n"
+          "ecc sbecnt <val>        - set Single-Bit Error counter\n"
+          "ecc sbethr <val>        - set Single-Bit Threshold\n"
+          "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
+          "  [-|+]sbe - Single-Bit Error\n"
+          "  [-|+]mbe - Multiple-Bit Error\n"
+          "  [-|+]mse - Memory Select Error\n"
+          "  [-|+]all - all errors\n"
+          "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+          "  mme - Multiple Memory Errors\n"
+          "  sbe - Single-Bit Error\n"
+          "  mbe - Multiple-Bit Error\n"
+          "  mse - Memory Select Error\n"
+          "  all - all errors\n"
+          "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
+          "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
+          "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
+          "ecc inject <en|dis>    - enable/disable error injection\n"
+          "ecc mirror <en|dis>    - enable/disable mirror byte\n"
+          "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
+          "  - enables injects\n"
+          "  - writes pattern injecting errors with double word access\n"
+          "  - disables injects\n"
+          "  - reads pattern back with double word access, generates error\n"
+          "  - re-inits memory\n"
+          "ecc testword <addr> <cnt>  - test mem region with word access:\n"
+          "  - enables injects\n"
+          "  - writes pattern injecting errors with word access\n"
+          "  - writes pattern with word access, generates error\n"
+          "  - disables injects\n" "  - re-inits memory");
+#endif