--- /dev/null
+/* Definitions for data structures and routines for the regular
+ expression library, version 0.12.
+ Copyright (C) 1985,1989-1993,1995-1998, 2000 Free Software Foundation, Inc.
+
+ This file is part of the GNU C Library. Its master source is NOT part of
+ the C library, however. The master source lives in /gd/gnu/lib.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Library General Public License as
+ published by the Free Software Foundation; either version 2 of the
+ License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with the GNU C Library; see the file COPYING.LIB. If not,
+ write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#ifndef _REGEX_H
+#define _REGEX_H 1
+
+/* Allow the use in C++ code. */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* POSIX says that <sys/types.h> must be included (by the caller) before
+ <regex.h>. */
+
+#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS
+/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it
+ should be there. */
+# include <stddef.h>
+#endif
+
+/* The following two types have to be signed and unsigned integer type
+ wide enough to hold a value of a pointer. For most ANSI compilers
+ ptrdiff_t and size_t should be likely OK. Still size of these two
+ types is 2 for Microsoft C. Ugh... */
+typedef long int s_reg_t;
+typedef unsigned long int active_reg_t;
+
+/* The following bits are used to determine the regexp syntax we
+ recognize. The set/not-set meanings are chosen so that Emacs syntax
+ remains the value 0. The bits are given in alphabetical order, and
+ the definitions shifted by one from the previous bit; thus, when we
+ add or remove a bit, only one other definition need change. */
+typedef unsigned long int reg_syntax_t;
+
+/* If this bit is not set, then \ inside a bracket expression is literal.
+ If set, then such a \ quotes the following character. */
+#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
+
+/* If this bit is not set, then + and ? are operators, and \+ and \? are
+ literals.
+ If set, then \+ and \? are operators and + and ? are literals. */
+#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
+
+/* If this bit is set, then character classes are supported. They are:
+ [:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:],
+ [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
+ If not set, then character classes are not supported. */
+#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
+
+/* If this bit is set, then ^ and $ are always anchors (outside bracket
+ expressions, of course).
+ If this bit is not set, then it depends:
+ ^ is an anchor if it is at the beginning of a regular
+ expression or after an open-group or an alternation operator;
+ $ is an anchor if it is at the end of a regular expression, or
+ before a close-group or an alternation operator.
+
+ This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
+ POSIX draft 11.2 says that * etc. in leading positions is undefined.
+ We already implemented a previous draft which made those constructs
+ invalid, though, so we haven't changed the code back. */
+#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
+
+/* If this bit is set, then special characters are always special
+ regardless of where they are in the pattern.
+ If this bit is not set, then special characters are special only in
+ some contexts; otherwise they are ordinary. Specifically,
+ * + ? and intervals are only special when not after the beginning,
+ open-group, or alternation operator. */
+#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
+
+/* If this bit is set, then *, +, ?, and { cannot be first in an re or
+ immediately after an alternation or begin-group operator. */
+#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
+
+/* If this bit is set, then . matches newline.
+ If not set, then it doesn't. */
+#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
+
+/* If this bit is set, then . doesn't match NUL.
+ If not set, then it does. */
+#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
+
+/* If this bit is set, nonmatching lists [^...] do not match newline.
+ If not set, they do. */
+#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
+
+/* If this bit is set, either \{...\} or {...} defines an
+ interval, depending on RE_NO_BK_BRACES.
+ If not set, \{, \}, {, and } are literals. */
+#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
+
+/* If this bit is set, +, ? and | aren't recognized as operators.
+ If not set, they are. */
+#define RE_LIMITED_OPS (RE_INTERVALS << 1)
+
+/* If this bit is set, newline is an alternation operator.
+ If not set, newline is literal. */
+#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
+
+/* If this bit is set, then `{...}' defines an interval, and \{ and \}
+ are literals.
+ If not set, then `\{...\}' defines an interval. */
+#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
+
+/* If this bit is set, (...) defines a group, and \( and \) are literals.
+ If not set, \(...\) defines a group, and ( and ) are literals. */
+#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
+
+/* If this bit is set, then \<digit> matches <digit>.
+ If not set, then \<digit> is a back-reference. */
+#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
+
+/* If this bit is set, then | is an alternation operator, and \| is literal.
+ If not set, then \| is an alternation operator, and | is literal. */
+#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
+
+/* If this bit is set, then an ending range point collating higher
+ than the starting range point, as in [z-a], is invalid.
+ If not set, then when ending range point collates higher than the
+ starting range point, the range is ignored. */
+#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
+
+/* If this bit is set, then an unmatched ) is ordinary.
+ If not set, then an unmatched ) is invalid. */
+#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
+
+/* If this bit is set, succeed as soon as we match the whole pattern,
+ without further backtracking. */
+#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
+
+/* If this bit is set, do not process the GNU regex operators.
+ If not set, then the GNU regex operators are recognized. */
+#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
+
+/* If this bit is set, turn on internal regex debugging.
+ If not set, and debugging was on, turn it off.
+ This only works if regex.c is compiled -DDEBUG.
+ We define this bit always, so that all that's needed to turn on
+ debugging is to recompile regex.c; the calling code can always have
+ this bit set, and it won't affect anything in the normal case. */
+#define RE_DEBUG (RE_NO_GNU_OPS << 1)
+
+/* This global variable defines the particular regexp syntax to use (for
+ some interfaces). When a regexp is compiled, the syntax used is
+ stored in the pattern buffer, so changing this does not affect
+ already-compiled regexps. */
+extern reg_syntax_t re_syntax_options;
+
+/* Define combinations of the above bits for the standard possibilities.
+ (The [[[ comments delimit what gets put into the Texinfo file, so
+ don't delete them!) */
+/* [[[begin syntaxes]]] */
+#define RE_SYNTAX_EMACS 0
+
+#define RE_SYNTAX_AWK \
+ (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \
+ | RE_NO_BK_PARENS | RE_NO_BK_REFS \
+ | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \
+ | RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \
+ | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
+
+#define RE_SYNTAX_GNU_AWK \
+ ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \
+ & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS))
+
+#define RE_SYNTAX_POSIX_AWK \
+ (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \
+ | RE_INTERVALS | RE_NO_GNU_OPS)
+
+#define RE_SYNTAX_GREP \
+ (RE_BK_PLUS_QM | RE_CHAR_CLASSES \
+ | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \
+ | RE_NEWLINE_ALT)
+
+#define RE_SYNTAX_EGREP \
+ (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \
+ | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \
+ | RE_NEWLINE_ALT | RE_NO_BK_PARENS \
+ | RE_NO_BK_VBAR)
+
+#define RE_SYNTAX_POSIX_EGREP \
+ (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES)
+
+/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */
+#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
+
+#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
+
+/* Syntax bits common to both basic and extended POSIX regex syntax. */
+#define _RE_SYNTAX_POSIX_COMMON \
+ (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \
+ | RE_INTERVALS | RE_NO_EMPTY_RANGES)
+
+#define RE_SYNTAX_POSIX_BASIC \
+ (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM)
+
+/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
+ RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this
+ isn't minimal, since other operators, such as \`, aren't disabled. */
+#define RE_SYNTAX_POSIX_MINIMAL_BASIC \
+ (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
+
+#define RE_SYNTAX_POSIX_EXTENDED \
+ (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \
+ | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \
+ | RE_NO_BK_PARENS | RE_NO_BK_VBAR \
+ | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD)
+
+/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is
+ removed and RE_NO_BK_REFS is added. */
+#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \
+ (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \
+ | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \
+ | RE_NO_BK_PARENS | RE_NO_BK_REFS \
+ | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD)
+/* [[[end syntaxes]]] */
+
+/* Maximum number of duplicates an interval can allow. Some systems
+ (erroneously) define this in other header files, but we want our
+ value, so remove any previous define. */
+#ifdef RE_DUP_MAX
+# undef RE_DUP_MAX
+#endif
+/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */
+#define RE_DUP_MAX (0x7fff)
+
+
+/* POSIX `cflags' bits (i.e., information for `regcomp'). */
+
+/* If this bit is set, then use extended regular expression syntax.
+ If not set, then use basic regular expression syntax. */
+#define REG_EXTENDED 1
+
+/* If this bit is set, then ignore case when matching.
+ If not set, then case is significant. */
+#define REG_ICASE (REG_EXTENDED << 1)
+
+/* If this bit is set, then anchors do not match at newline
+ characters in the string.
+ If not set, then anchors do match at newlines. */
+#define REG_NEWLINE (REG_ICASE << 1)
+
+/* If this bit is set, then report only success or fail in regexec.
+ If not set, then returns differ between not matching and errors. */
+#define REG_NOSUB (REG_NEWLINE << 1)
+
+
+/* POSIX `eflags' bits (i.e., information for regexec). */
+
+/* If this bit is set, then the beginning-of-line operator doesn't match
+ the beginning of the string (presumably because it's not the
+ beginning of a line).
+ If not set, then the beginning-of-line operator does match the
+ beginning of the string. */
+#define REG_NOTBOL 1
+
+/* Like REG_NOTBOL, except for the end-of-line. */
+#define REG_NOTEOL (1 << 1)
+
+
+/* If any error codes are removed, changed, or added, update the
+ `re_error_msg' table in regex.c. */
+typedef enum
+{
+#ifdef _XOPEN_SOURCE
+ REG_ENOSYS = -1, /* This will never happen for this implementation. */
+#endif
+
+ REG_NOERROR = 0, /* Success. */
+ REG_NOMATCH, /* Didn't find a match (for regexec). */
+
+ /* POSIX regcomp return error codes. (In the order listed in the
+ standard.) */
+ REG_BADPAT, /* Invalid pattern. */
+ REG_ECOLLATE, /* Not implemented. */
+ REG_ECTYPE, /* Invalid character class name. */
+ REG_EESCAPE, /* Trailing backslash. */
+ REG_ESUBREG, /* Invalid back reference. */
+ REG_EBRACK, /* Unmatched left bracket. */
+ REG_EPAREN, /* Parenthesis imbalance. */
+ REG_EBRACE, /* Unmatched \{. */
+ REG_BADBR, /* Invalid contents of \{\}. */
+ REG_ERANGE, /* Invalid range end. */
+ REG_ESPACE, /* Ran out of memory. */
+ REG_BADRPT, /* No preceding re for repetition op. */
+
+ /* Error codes we've added. */
+ REG_EEND, /* Premature end. */
+ REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */
+ REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */
+} reg_errcode_t;
+
+/* This data structure represents a compiled pattern. Before calling
+ the pattern compiler, the fields `buffer', `allocated', `fastmap',
+ `translate', and `no_sub' can be set. After the pattern has been
+ compiled, the `re_nsub' field is available. All other fields are
+ private to the regex routines. */
+
+#ifndef RE_TRANSLATE_TYPE
+# define RE_TRANSLATE_TYPE char *
+#endif
+
+struct re_pattern_buffer
+{
+/* [[[begin pattern_buffer]]] */
+ /* Space that holds the compiled pattern. It is declared as
+ `unsigned char *' because its elements are
+ sometimes used as array indexes. */
+ unsigned char *buffer;
+
+ /* Number of bytes to which `buffer' points. */
+ unsigned long int allocated;
+
+ /* Number of bytes actually used in `buffer'. */
+ unsigned long int used;
+
+ /* Syntax setting with which the pattern was compiled. */
+ reg_syntax_t syntax;
+
+ /* Pointer to a fastmap, if any, otherwise zero. re_search uses
+ the fastmap, if there is one, to skip over impossible
+ starting points for matches. */
+ char *fastmap;
+
+ /* Either a translate table to apply to all characters before
+ comparing them, or zero for no translation. The translation
+ is applied to a pattern when it is compiled and to a string
+ when it is matched. */
+ RE_TRANSLATE_TYPE translate;
+
+ /* Number of subexpressions found by the compiler. */
+ size_t re_nsub;
+
+ /* Zero if this pattern cannot match the empty string, one else.
+ Well, in truth it's used only in `re_search_2', to see
+ whether or not we should use the fastmap, so we don't set
+ this absolutely perfectly; see `re_compile_fastmap' (the
+ `duplicate' case). */
+ unsigned can_be_null : 1;
+
+ /* If REGS_UNALLOCATED, allocate space in the `regs' structure
+ for `max (RE_NREGS, re_nsub + 1)' groups.
+ If REGS_REALLOCATE, reallocate space if necessary.
+ If REGS_FIXED, use what's there. */
+#define REGS_UNALLOCATED 0
+#define REGS_REALLOCATE 1
+#define REGS_FIXED 2
+ unsigned regs_allocated : 2;
+
+ /* Set to zero when `regex_compile' compiles a pattern; set to one
+ by `re_compile_fastmap' if it updates the fastmap. */
+ unsigned fastmap_accurate : 1;
+
+ /* If set, `re_match_2' does not return information about
+ subexpressions. */
+ unsigned no_sub : 1;
+
+ /* If set, a beginning-of-line anchor doesn't match at the
+ beginning of the string. */
+ unsigned not_bol : 1;
+
+ /* Similarly for an end-of-line anchor. */
+ unsigned not_eol : 1;
+
+ /* If true, an anchor at a newline matches. */
+ unsigned newline_anchor : 1;
+
+/* [[[end pattern_buffer]]] */
+};
+
+typedef struct re_pattern_buffer bregex_t;
+
+/* Type for byte offsets within the string. POSIX mandates this. */
+typedef int regoff_t;
+
+
+/* This is the structure we store register match data in. See
+ regex.texinfo for a full description of what registers match. */
+struct re_registers
+{
+ unsigned num_regs;
+ regoff_t *start;
+ regoff_t *end;
+};
+
+
+/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
+ `re_match_2' returns information about at least this many registers
+ the first time a `regs' structure is passed. */
+#ifndef RE_NREGS
+# define RE_NREGS 30
+#endif
+
+
+/* POSIX specification for registers. Aside from the different names than
+ `re_registers', POSIX uses an array of structures, instead of a
+ structure of arrays. */
+typedef struct
+{
+ regoff_t rm_so; /* Byte offset from string's start to substring's start. */
+ regoff_t rm_eo; /* Byte offset from string's start to substring's end. */
+} regmatch_t;
+
+/* Declarations for routines. */
+
+/* To avoid duplicating every routine declaration -- once with a
+ prototype (if we are ANSI), and once without (if we aren't) -- we
+ use the following macro to declare argument types. This
+ unfortunately clutters up the declarations a bit, but I think it's
+ worth it. */
+
+#if __STDC__
+
+# define _RE_ARGS(args) args
+
+#else /* not __STDC__ */
+
+# define _RE_ARGS(args) ()
+
+#endif /* not __STDC__ */
+
+/* Sets the current default syntax to SYNTAX, and return the old syntax.
+ You can also simply assign to the `re_syntax_options' variable. */
+extern reg_syntax_t re_set_syntax _RE_ARGS ((reg_syntax_t syntax));
+
+/* Compile the regular expression PATTERN, with length LENGTH
+ and syntax given by the global `re_syntax_options', into the buffer
+ BUFFER. Return NULL if successful, and an error string if not. */
+extern const char *re_compile_pattern
+ _RE_ARGS ((const char *pattern, size_t length,
+ struct re_pattern_buffer *buffer));
+
+
+/* Compile a fastmap for the compiled pattern in BUFFER; used to
+ accelerate searches. Return 0 if successful and -2 if was an
+ internal error. */
+extern int re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer));
+
+
+/* Search in the string STRING (with length LENGTH) for the pattern
+ compiled into BUFFER. Start searching at position START, for RANGE
+ characters. Return the starting position of the match, -1 for no
+ match, or -2 for an internal error. Also return register
+ information in REGS (if REGS and BUFFER->no_sub are nonzero). */
+extern int re_search
+ _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
+ int length, int start, int range, struct re_registers *regs));
+
+
+/* Like `re_search', but search in the concatenation of STRING1 and
+ STRING2. Also, stop searching at index START + STOP. */
+extern int re_search_2
+ _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
+ int length1, const char *string2, int length2,
+ int start, int range, struct re_registers *regs, int stop));
+
+
+/* Like `re_search', but return how many characters in STRING the regexp
+ in BUFFER matched, starting at position START. */
+extern int re_match
+ _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
+ int length, int start, struct re_registers *regs));
+
+
+/* Relates to `re_match' as `re_search_2' relates to `re_search'. */
+extern int re_match_2
+ _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
+ int length1, const char *string2, int length2,
+ int start, struct re_registers *regs, int stop));
+
+
+/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
+ ENDS. Subsequent matches using BUFFER and REGS will use this memory
+ for recording register information. STARTS and ENDS must be
+ allocated with malloc, and must each be at least `NUM_REGS * sizeof
+ (regoff_t)' bytes long.
+
+ If NUM_REGS == 0, then subsequent matches should allocate their own
+ register data.
+
+ Unless this function is called, the first search or match using
+ PATTERN_BUFFER will allocate its own register data, without
+ freeing the old data. */
+extern void re_set_registers
+ _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs,
+ unsigned num_regs, regoff_t *starts, regoff_t *ends));
+
+#if defined _REGEX_RE_COMP || defined _LIBC
+# ifndef _CRAY
+/* 4.2 bsd compatibility. */
+extern char *re_comp _RE_ARGS ((const char *));
+extern int re_exec _RE_ARGS ((const char *));
+# endif
+#endif
+
+/* POSIX compatibility. */
+extern int regcomp _RE_ARGS ((regex_t *__preg, const char *__pattern,
+ int __cflags));
+
+extern int regexec _RE_ARGS ((const regex_t *__preg,
+ const char *__string, size_t __nmatch,
+ regmatch_t __pmatch[], int __eflags));
+
+extern size_t regerror _RE_ARGS ((int __errcode, const regex_t *__preg,
+ char *__errbuf, size_t __errbuf_size));
+
+extern void regfree _RE_ARGS ((regex_t *__preg));
+
+
+#ifdef __cplusplus
+}
+#endif /* C++ */
+
+#endif /* regex.h */
+
+/*
+Local variables:
+make-backup-files: t
+version-control: t
+trim-versions-without-asking: nil
+End:
+*/
+++ /dev/null
-/* Definitions for data structures and routines for the regular
- expression library, version 0.12.
- Copyright (C) 1985,1989-1993,1995-1998, 2000 Free Software Foundation, Inc.
-
- This file is part of the GNU C Library. Its master source is NOT part of
- the C library, however. The master source lives in /gd/gnu/lib.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#ifndef _REGEX_H
-#define _REGEX_H 1
-
-/* Allow the use in C++ code. */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* POSIX says that <sys/types.h> must be included (by the caller) before
- <regex.h>. */
-
-#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS
-/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it
- should be there. */
-# include <stddef.h>
-#endif
-
-/* The following two types have to be signed and unsigned integer type
- wide enough to hold a value of a pointer. For most ANSI compilers
- ptrdiff_t and size_t should be likely OK. Still size of these two
- types is 2 for Microsoft C. Ugh... */
-typedef long int s_reg_t;
-typedef unsigned long int active_reg_t;
-
-/* The following bits are used to determine the regexp syntax we
- recognize. The set/not-set meanings are chosen so that Emacs syntax
- remains the value 0. The bits are given in alphabetical order, and
- the definitions shifted by one from the previous bit; thus, when we
- add or remove a bit, only one other definition need change. */
-typedef unsigned long int reg_syntax_t;
-
-/* If this bit is not set, then \ inside a bracket expression is literal.
- If set, then such a \ quotes the following character. */
-#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
-
-/* If this bit is not set, then + and ? are operators, and \+ and \? are
- literals.
- If set, then \+ and \? are operators and + and ? are literals. */
-#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
-
-/* If this bit is set, then character classes are supported. They are:
- [:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:],
- [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
- If not set, then character classes are not supported. */
-#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
-
-/* If this bit is set, then ^ and $ are always anchors (outside bracket
- expressions, of course).
- If this bit is not set, then it depends:
- ^ is an anchor if it is at the beginning of a regular
- expression or after an open-group or an alternation operator;
- $ is an anchor if it is at the end of a regular expression, or
- before a close-group or an alternation operator.
-
- This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
- POSIX draft 11.2 says that * etc. in leading positions is undefined.
- We already implemented a previous draft which made those constructs
- invalid, though, so we haven't changed the code back. */
-#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
-
-/* If this bit is set, then special characters are always special
- regardless of where they are in the pattern.
- If this bit is not set, then special characters are special only in
- some contexts; otherwise they are ordinary. Specifically,
- * + ? and intervals are only special when not after the beginning,
- open-group, or alternation operator. */
-#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
-
-/* If this bit is set, then *, +, ?, and { cannot be first in an re or
- immediately after an alternation or begin-group operator. */
-#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
-
-/* If this bit is set, then . matches newline.
- If not set, then it doesn't. */
-#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
-
-/* If this bit is set, then . doesn't match NUL.
- If not set, then it does. */
-#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
-
-/* If this bit is set, nonmatching lists [^...] do not match newline.
- If not set, they do. */
-#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
-
-/* If this bit is set, either \{...\} or {...} defines an
- interval, depending on RE_NO_BK_BRACES.
- If not set, \{, \}, {, and } are literals. */
-#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
-
-/* If this bit is set, +, ? and | aren't recognized as operators.
- If not set, they are. */
-#define RE_LIMITED_OPS (RE_INTERVALS << 1)
-
-/* If this bit is set, newline is an alternation operator.
- If not set, newline is literal. */
-#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
-
-/* If this bit is set, then `{...}' defines an interval, and \{ and \}
- are literals.
- If not set, then `\{...\}' defines an interval. */
-#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
-
-/* If this bit is set, (...) defines a group, and \( and \) are literals.
- If not set, \(...\) defines a group, and ( and ) are literals. */
-#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
-
-/* If this bit is set, then \<digit> matches <digit>.
- If not set, then \<digit> is a back-reference. */
-#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
-
-/* If this bit is set, then | is an alternation operator, and \| is literal.
- If not set, then \| is an alternation operator, and | is literal. */
-#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
-
-/* If this bit is set, then an ending range point collating higher
- than the starting range point, as in [z-a], is invalid.
- If not set, then when ending range point collates higher than the
- starting range point, the range is ignored. */
-#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
-
-/* If this bit is set, then an unmatched ) is ordinary.
- If not set, then an unmatched ) is invalid. */
-#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
-
-/* If this bit is set, succeed as soon as we match the whole pattern,
- without further backtracking. */
-#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
-
-/* If this bit is set, do not process the GNU regex operators.
- If not set, then the GNU regex operators are recognized. */
-#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
-
-/* If this bit is set, turn on internal regex debugging.
- If not set, and debugging was on, turn it off.
- This only works if regex.c is compiled -DDEBUG.
- We define this bit always, so that all that's needed to turn on
- debugging is to recompile regex.c; the calling code can always have
- this bit set, and it won't affect anything in the normal case. */
-#define RE_DEBUG (RE_NO_GNU_OPS << 1)
-
-/* This global variable defines the particular regexp syntax to use (for
- some interfaces). When a regexp is compiled, the syntax used is
- stored in the pattern buffer, so changing this does not affect
- already-compiled regexps. */
-extern reg_syntax_t re_syntax_options;
-
-/* Define combinations of the above bits for the standard possibilities.
- (The [[[ comments delimit what gets put into the Texinfo file, so
- don't delete them!) */
-/* [[[begin syntaxes]]] */
-#define RE_SYNTAX_EMACS 0
-
-#define RE_SYNTAX_AWK \
- (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \
- | RE_NO_BK_PARENS | RE_NO_BK_REFS \
- | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \
- | RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \
- | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
-
-#define RE_SYNTAX_GNU_AWK \
- ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \
- & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS))
-
-#define RE_SYNTAX_POSIX_AWK \
- (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \
- | RE_INTERVALS | RE_NO_GNU_OPS)
-
-#define RE_SYNTAX_GREP \
- (RE_BK_PLUS_QM | RE_CHAR_CLASSES \
- | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \
- | RE_NEWLINE_ALT)
-
-#define RE_SYNTAX_EGREP \
- (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \
- | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \
- | RE_NEWLINE_ALT | RE_NO_BK_PARENS \
- | RE_NO_BK_VBAR)
-
-#define RE_SYNTAX_POSIX_EGREP \
- (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES)
-
-/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */
-#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
-
-#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
-
-/* Syntax bits common to both basic and extended POSIX regex syntax. */
-#define _RE_SYNTAX_POSIX_COMMON \
- (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \
- | RE_INTERVALS | RE_NO_EMPTY_RANGES)
-
-#define RE_SYNTAX_POSIX_BASIC \
- (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM)
-
-/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
- RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this
- isn't minimal, since other operators, such as \`, aren't disabled. */
-#define RE_SYNTAX_POSIX_MINIMAL_BASIC \
- (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
-
-#define RE_SYNTAX_POSIX_EXTENDED \
- (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \
- | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \
- | RE_NO_BK_PARENS | RE_NO_BK_VBAR \
- | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD)
-
-/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is
- removed and RE_NO_BK_REFS is added. */
-#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \
- (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \
- | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \
- | RE_NO_BK_PARENS | RE_NO_BK_REFS \
- | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD)
-/* [[[end syntaxes]]] */
-
-/* Maximum number of duplicates an interval can allow. Some systems
- (erroneously) define this in other header files, but we want our
- value, so remove any previous define. */
-#ifdef RE_DUP_MAX
-# undef RE_DUP_MAX
-#endif
-/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */
-#define RE_DUP_MAX (0x7fff)
-
-
-/* POSIX `cflags' bits (i.e., information for `regcomp'). */
-
-/* If this bit is set, then use extended regular expression syntax.
- If not set, then use basic regular expression syntax. */
-#define REG_EXTENDED 1
-
-/* If this bit is set, then ignore case when matching.
- If not set, then case is significant. */
-#define REG_ICASE (REG_EXTENDED << 1)
-
-/* If this bit is set, then anchors do not match at newline
- characters in the string.
- If not set, then anchors do match at newlines. */
-#define REG_NEWLINE (REG_ICASE << 1)
-
-/* If this bit is set, then report only success or fail in regexec.
- If not set, then returns differ between not matching and errors. */
-#define REG_NOSUB (REG_NEWLINE << 1)
-
-
-/* POSIX `eflags' bits (i.e., information for regexec). */
-
-/* If this bit is set, then the beginning-of-line operator doesn't match
- the beginning of the string (presumably because it's not the
- beginning of a line).
- If not set, then the beginning-of-line operator does match the
- beginning of the string. */
-#define REG_NOTBOL 1
-
-/* Like REG_NOTBOL, except for the end-of-line. */
-#define REG_NOTEOL (1 << 1)
-
-
-/* If any error codes are removed, changed, or added, update the
- `re_error_msg' table in regex.c. */
-typedef enum
-{
-#ifdef _XOPEN_SOURCE
- REG_ENOSYS = -1, /* This will never happen for this implementation. */
-#endif
-
- REG_NOERROR = 0, /* Success. */
- REG_NOMATCH, /* Didn't find a match (for regexec). */
-
- /* POSIX regcomp return error codes. (In the order listed in the
- standard.) */
- REG_BADPAT, /* Invalid pattern. */
- REG_ECOLLATE, /* Not implemented. */
- REG_ECTYPE, /* Invalid character class name. */
- REG_EESCAPE, /* Trailing backslash. */
- REG_ESUBREG, /* Invalid back reference. */
- REG_EBRACK, /* Unmatched left bracket. */
- REG_EPAREN, /* Parenthesis imbalance. */
- REG_EBRACE, /* Unmatched \{. */
- REG_BADBR, /* Invalid contents of \{\}. */
- REG_ERANGE, /* Invalid range end. */
- REG_ESPACE, /* Ran out of memory. */
- REG_BADRPT, /* No preceding re for repetition op. */
-
- /* Error codes we've added. */
- REG_EEND, /* Premature end. */
- REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */
- REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */
-} reg_errcode_t;
-
-/* This data structure represents a compiled pattern. Before calling
- the pattern compiler, the fields `buffer', `allocated', `fastmap',
- `translate', and `no_sub' can be set. After the pattern has been
- compiled, the `re_nsub' field is available. All other fields are
- private to the regex routines. */
-
-#ifndef RE_TRANSLATE_TYPE
-# define RE_TRANSLATE_TYPE char *
-#endif
-
-struct re_pattern_buffer
-{
-/* [[[begin pattern_buffer]]] */
- /* Space that holds the compiled pattern. It is declared as
- `unsigned char *' because its elements are
- sometimes used as array indexes. */
- unsigned char *buffer;
-
- /* Number of bytes to which `buffer' points. */
- unsigned long int allocated;
-
- /* Number of bytes actually used in `buffer'. */
- unsigned long int used;
-
- /* Syntax setting with which the pattern was compiled. */
- reg_syntax_t syntax;
-
- /* Pointer to a fastmap, if any, otherwise zero. re_search uses
- the fastmap, if there is one, to skip over impossible
- starting points for matches. */
- char *fastmap;
-
- /* Either a translate table to apply to all characters before
- comparing them, or zero for no translation. The translation
- is applied to a pattern when it is compiled and to a string
- when it is matched. */
- RE_TRANSLATE_TYPE translate;
-
- /* Number of subexpressions found by the compiler. */
- size_t re_nsub;
-
- /* Zero if this pattern cannot match the empty string, one else.
- Well, in truth it's used only in `re_search_2', to see
- whether or not we should use the fastmap, so we don't set
- this absolutely perfectly; see `re_compile_fastmap' (the
- `duplicate' case). */
- unsigned can_be_null : 1;
-
- /* If REGS_UNALLOCATED, allocate space in the `regs' structure
- for `max (RE_NREGS, re_nsub + 1)' groups.
- If REGS_REALLOCATE, reallocate space if necessary.
- If REGS_FIXED, use what's there. */
-#define REGS_UNALLOCATED 0
-#define REGS_REALLOCATE 1
-#define REGS_FIXED 2
- unsigned regs_allocated : 2;
-
- /* Set to zero when `regex_compile' compiles a pattern; set to one
- by `re_compile_fastmap' if it updates the fastmap. */
- unsigned fastmap_accurate : 1;
-
- /* If set, `re_match_2' does not return information about
- subexpressions. */
- unsigned no_sub : 1;
-
- /* If set, a beginning-of-line anchor doesn't match at the
- beginning of the string. */
- unsigned not_bol : 1;
-
- /* Similarly for an end-of-line anchor. */
- unsigned not_eol : 1;
-
- /* If true, an anchor at a newline matches. */
- unsigned newline_anchor : 1;
-
-/* [[[end pattern_buffer]]] */
-};
-
-typedef struct re_pattern_buffer bregex_t;
-
-/* Type for byte offsets within the string. POSIX mandates this. */
-typedef int regoff_t;
-
-
-/* This is the structure we store register match data in. See
- regex.texinfo for a full description of what registers match. */
-struct re_registers
-{
- unsigned num_regs;
- regoff_t *start;
- regoff_t *end;
-};
-
-
-/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
- `re_match_2' returns information about at least this many registers
- the first time a `regs' structure is passed. */
-#ifndef RE_NREGS
-# define RE_NREGS 30
-#endif
-
-
-/* POSIX specification for registers. Aside from the different names than
- `re_registers', POSIX uses an array of structures, instead of a
- structure of arrays. */
-typedef struct
-{
- regoff_t rm_so; /* Byte offset from string's start to substring's start. */
- regoff_t rm_eo; /* Byte offset from string's start to substring's end. */
-} regmatch_t;
-
-/* Declarations for routines. */
-
-/* To avoid duplicating every routine declaration -- once with a
- prototype (if we are ANSI), and once without (if we aren't) -- we
- use the following macro to declare argument types. This
- unfortunately clutters up the declarations a bit, but I think it's
- worth it. */
-
-#if __STDC__
-
-# define _RE_ARGS(args) args
-
-#else /* not __STDC__ */
-
-# define _RE_ARGS(args) ()
-
-#endif /* not __STDC__ */
-
-/* Sets the current default syntax to SYNTAX, and return the old syntax.
- You can also simply assign to the `re_syntax_options' variable. */
-extern reg_syntax_t re_set_syntax _RE_ARGS ((reg_syntax_t syntax));
-
-/* Compile the regular expression PATTERN, with length LENGTH
- and syntax given by the global `re_syntax_options', into the buffer
- BUFFER. Return NULL if successful, and an error string if not. */
-extern const char *re_compile_pattern
- _RE_ARGS ((const char *pattern, size_t length,
- struct re_pattern_buffer *buffer));
-
-
-/* Compile a fastmap for the compiled pattern in BUFFER; used to
- accelerate searches. Return 0 if successful and -2 if was an
- internal error. */
-extern int re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer));
-
-
-/* Search in the string STRING (with length LENGTH) for the pattern
- compiled into BUFFER. Start searching at position START, for RANGE
- characters. Return the starting position of the match, -1 for no
- match, or -2 for an internal error. Also return register
- information in REGS (if REGS and BUFFER->no_sub are nonzero). */
-extern int re_search
- _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
- int length, int start, int range, struct re_registers *regs));
-
-
-/* Like `re_search', but search in the concatenation of STRING1 and
- STRING2. Also, stop searching at index START + STOP. */
-extern int re_search_2
- _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
- int length1, const char *string2, int length2,
- int start, int range, struct re_registers *regs, int stop));
-
-
-/* Like `re_search', but return how many characters in STRING the regexp
- in BUFFER matched, starting at position START. */
-extern int re_match
- _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
- int length, int start, struct re_registers *regs));
-
-
-/* Relates to `re_match' as `re_search_2' relates to `re_search'. */
-extern int re_match_2
- _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
- int length1, const char *string2, int length2,
- int start, struct re_registers *regs, int stop));
-
-
-/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
- ENDS. Subsequent matches using BUFFER and REGS will use this memory
- for recording register information. STARTS and ENDS must be
- allocated with malloc, and must each be at least `NUM_REGS * sizeof
- (regoff_t)' bytes long.
-
- If NUM_REGS == 0, then subsequent matches should allocate their own
- register data.
-
- Unless this function is called, the first search or match using
- PATTERN_BUFFER will allocate its own register data, without
- freeing the old data. */
-extern void re_set_registers
- _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs,
- unsigned num_regs, regoff_t *starts, regoff_t *ends));
-
-#if defined _REGEX_RE_COMP || defined _LIBC
-# ifndef _CRAY
-/* 4.2 bsd compatibility. */
-extern char *re_comp _RE_ARGS ((const char *));
-extern int re_exec _RE_ARGS ((const char *));
-# endif
-#endif
-
-/* POSIX compatibility. */
-extern int regcomp _RE_ARGS ((regex_t *__preg, const char *__pattern,
- int __cflags));
-
-extern int regexec _RE_ARGS ((const regex_t *__preg,
- const char *__string, size_t __nmatch,
- regmatch_t __pmatch[], int __eflags));
-
-extern size_t regerror _RE_ARGS ((int __errcode, const regex_t *__preg,
- char *__errbuf, size_t __errbuf_size));
-
-extern void regfree _RE_ARGS ((regex_t *__preg));
-
-
-#ifdef __cplusplus
-}
-#endif /* C++ */
-
-#endif /* regex.h */
-
-/*
-Local variables:
-make-backup-files: t
-version-control: t
-trim-versions-without-asking: nil
-End:
-*/
projects / bacula / bacula / commitdiff